Download AEG Santo 1450-7 TK Operating instructions

Symptom
The food is too warm.
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
Unusual noises.
The compressor does not
start immediately after
changing the temperature
setting.
Water on the floor or on
storage shelves.
Possible Cause
Temperature is not
properly adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Remedy
Please look in the “Initial
Start Up” section.
Open the door only as long
as necessary.
Turn the temperature regulation to a colder setting
temporarily.
Please look in the
“Installation location” section.
Light bulb is defective.
Please look in the “Changing
the Light Bulb” sections.
Door seal is not air tight
(possibly after reversing
the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
Appliance is not level.
Readjust the feet.
The appliance is touching
the wall or other objects.
Move the appliance
slightly.
This normal, no error has
occurred.
The compressor starts after
a period of time.
Water drain hole is
blocked.
See the “Cleaning and
Care” section.
21