1
Download Virtual Console FCD-CFxx System information
Transcript
3.3.1.31 BAT1030 : "The <Controller name> battery charge level is normal." When event is generated, message will have the following substitutions: • <Controller name> = "RAID Controller in Slot 5" 3.3.1.32 BAT1031 : "The battery temperature on <controller name> is above normal." When event is generated, message will have the following substitutions: • <controller name> = "RAID Controller in Slot 5" 3.3.1.33 BAT1032 : "The battery temperature on <controller name> is normal." When event is generated, message will have the following substitutions: • <controller name> = "RAID Controller in Slot 5" 3.3.1.34 BAT1033 : "The battery on <controller name> was removed." When event is generated, message will have the following substitutions: • <controller name> = "RAID Controller in Slot 5" 3.3.1.35 BAT1034 : "The battery properties for <controller name> have changed." When event is generated, message will have the following substitutions: • <controller name> = "RAID Controller in Slot 5" 3.3.1.36 BAT1035 : "The battery temperature on <controller name> is above the normal operating temperature." When event is generated, message will have the following substitutions: • <controller name> = "Controller 1 (PERC H800 Adapter)" 3.3.1.37 BAT1036 : "The battery on <controller name> is discharging." When event is generated, message will have the following substitutions: • <controller name> = "Controller 1 (PERC H800 Adapter)" 3.3.2 Subcategory= Cable [MessageID prefix =CBL] 3.3.2.1 CBL8500 : "SAS cable <cable id> to expander <expander id> is not connected." When event is generated, message will have the following substitutions: • <cable id> = "" 3.3.2.2 CBL8501 : "SAS cable <cable id> is connected to the incorrect expander." When event is generated, message will have the following substitutions: • <cable id> = "" 508
