Download E-Tac GB Series Specifications

E-TAC (GB Series)
Packaged Terminal Air Conditioner / Heat Pump
7,000 --- 15,000 Btuh
Performance and Specifications
Engineered Terminal Air Conditioner
APPLICATIONS
TABLE
OF CONTENTS
replacing packaged
terminal air conditioning units in
Lower Operating Costs and Reliable Comfort
for The Occupant
APPLICATIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
needs.
over models
with conventional
PERFORMANCE
AND ELECTRICAL
DATA . . . . . . electric
. 27-30
Whether you are designing a new structure or
•
an existing building, Gree E-TAC will meet PAGE
your
resistance
heaters
EXPANDED
OPERATING
RATING . . . . . . . . . . . . . . . 31-33
PRODUCT NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . 4
• Hotels and motels
PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• Nursing homes and assisted living care
PRODUCT
FEATURES & BENEFITS . . . . . . . . . . . . . . . 6-9
centers
COASTAL
PROTECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . 10
• Offices
HEAT
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . 11
• PUMP
Apartments
FIELD INSTALLED ACCESSORIES . . . . . . . . . . . . . . . 12-20
• Single--family dwellings
DIMENSIONAL DRAWINGS &
• Home conversions
residential addINSTALLATION
DATA -- NEW and
CONSTRUCTION
. . -ons
. 21-25
• Individual
units allow
tenants
INDOOR
FAN PERFORANCE
DATA
. . . . . . .to
. . .choose
. . . . . . . the
33
degree. . of
SOUND DATA
. . .comfort
. . . . . . . . and
. . . . operating
. . . . . . . . . . economy.
. . . . . . 34-35
reduces downtime:
• TRANSMISSION
Rapid servicingCOEFFICIENT
SOUND
. . . . . . . complete
. . . . . . 35
chassis
canSIZING
be replaced
OUTDOOR
GRILLE
. . . . . . . .in
. . . minutes
. . . . . . . . . without
. . . . 36
other occupants.
TYPICALdisrupting
WIRING SCHEMATICS
. . . . . . . . . . . . . . . . 37-38
• Each
unit operates
independently
ENERGY
MANAGEMENT
WIRING
. . . . . . . . . . . . of
. . . .other
. 39
units
in THERMOSTAT
the building. WIRING
No dependency
by
MULTIPLE
WALL
. . . . . . . . . . 40
building on central
GUIDE SPECIFICATION
. . . . .HVAC
. . . . . . .system.
. . . . . . . . . . . . 41-44
E-TAC
WALL THERMOSTAT CONNECTIONS . . . . . . . . . . . . . . 26
NEW CONSTRUCTION
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
•
•
•
Heat pump models offer substantial savings
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
2
4
2
APPLICATIONS
Lower Operating Costs and Reliable Comfort
for The Occupant
E-TAC
•
•
•
•
•
Hotels and motels
Nursing homes and assisted living care
centers
Offices
Apartments
Single--family dwellings
Home conversions and residential add--ons
•
•
•
NEW CONSTRUCTION
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
•
•
•
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
W
re
an
ne
E-TAC
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
•
•
A
N
T
(E
ar
in
in
fr
A
C
D
In
3
4
PRODUCT
CATALOG NUMBER-NOMENCLATURE
APPLICATIONS
Whether you are designing a new structure or
replacing packaged terminal airETAC
conditioning
units
in
12
HP 230V
an existing building, Gree E-TAC will meet your
needs. Series Designation
Lower Operating Costs and Reliable Comfort
for The Occupant
20
TAC and motels
• EHotels
• Nursing homes and assisted living care
centers
• Offices
• Cooling
Apartments
Capacity
07
7,000
BTUHdwellings
• Single--family
0
9
9
,
0
0
0
B
TUH
• Home conversions
and residential add--ons
E-TAC
12 - 12,000 BTUH
15 - 15,000 BTUH
NEW CONSTRUCTION
•
•
•
•
A
-A
Heat pump models offer substantial savings
over models
with conventional electric
Environmental Protection
resistance Aheaters
- Standard Protection
IndividualCunits
to choose the
- Seaallow
Coast tenants
Protection
degree of comfort and operating economy.
Revision
Leveldowntime: complete
reduces
Rapid servicing
chassis can be replaced in minutes without
disrupting other occupants.
Heat
Capacity
Each unitElectric
operates
independently
of other
1
5
2
K
W
units in the building. No dependency by
20 - 3 KW
building on
central HVAC system.
30 - 5 KW
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
del T
e
Eleactunit
ricalinRan
atinexisting
g
If you are replacing
wall sleeve,
(E-TAC)Mounit
isypdesigned
to meet the needs of the
H
P
H
e
a
t
P
u
m
p
2
3
0
V
2
0
8
/
2
3
0
V
6
0
H
z
1
PH
your
options
include:
architect, engineer, and contractor. For unit
H
C
H
e
a
t
/
C
o
o
l
2
6
5
V
2
6
5
V
6
0
H
z
1
P
H
• Replace the existing wall sleeve with the
installation, Gree’s expert support network will assist
the polymer wall sleeve. See accessory sleeve
in all applicable aspects of the construction
project,
Fig. 3 – Catalog Number Nomenclature
section for selecting the correct sleeve for
from preparing a budget to start-up.
your application.
ADVANTAGES FOR NEW
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
CONSTRUCTION
APPLICATION CONSIDERATIONS
replaced.
Design Flexibility
for are
theshipped
Architect/Engineer
Air Infiltration
Installation
instructions
with all E-TAC
• Use an existing sleeve and exterior grille. The
• It is
Whisper-quiet
performance,
indoors
and out
units.
important
that
air conditioning
systems
be
Excessive
airE-TAC
infiltration
Gree
will fitcan
into:intensify problems
properly
sized
andduct
installed
• No
bulky
systemfor each application in
associated with undersizing or oversizing a E-TAC
following major competitors’ wall
— The
order• to achieve
the desired
temperature
unit. This
can be the cause of insufficient cooling,
No separate
equipment
room and humidity
sleeves/grilles:
Carrier, Sources
GE, Amana,
levels
the space
be conditioned.
It is
dehumidification, or heating.
of air
• within
No water
towersto or
additional cooling
Trane,
Friedrich
and
Bryant,
and NOand
stronglyequipment
recommended that a professional engineer
infiltration include vents, gaps around windows
retrofit
kitfloors,
is required.
match the E-TAC units with the building structure and
doors, and accessory
improperly
sealed
ceilings or wall
•
No
complex
match-up
of
different
HVAC
climate.
joints. — Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
The following application considerations are all
•
Less
sensitivity
to
building
orientation
(sun,
extension
(see accessory Friedrich
important in choosing the proper E-TAC for the
Condensate Removal
wind,
shade)
Retrofit Wall Sleeve Adapter).
building structure.
Gree’s E-TAC has a new condensate (water)
• Optional architectural grille to permit custom
disposal system. The outdoor fan prop has a built in
exterior appearance
Undersizing
slinger ring which draws condensate and sprays it on
Owneris less
Costunit
Savings
for the (cooling
Building
IfInitial
an E-TAC
is undersized
capacity
the warm outdoor coil for evaporation. Thus
than• required
load for component
an application),
unit
No expensive
HVACthesystem
providing better disposal of excess condensate and
will not purchase
be able to cool the space down to the desired
improving unit operating efficiency.
temperature
very hotroom
days. The
could be
• No during
equipment
or result
maintenance
It is normal and desirable to have some condensate
warm and
humid or warm
engineering
staff and dry conditioned space.
water in the base pan to boost operating efficiency.
• Two--part delivery to minimize on--site
Oversizing
NOTE: This unit will not always evaporate 100%
damage
If an E-TAC unit is oversized (cooling capacity is
of the unit generated condensate and blown in
• Weather--protected wall sleeve that goes in
greater than required load for the specific application),
rain water. If it is necessary to control 100% of
place during construction; chassis that slides
the unit will cool the space down to the desired
the condensate, the Drain Kit (Part No.: DRAINin place after construction
desired temperature too quickly.
KIT-1PK) and a building condensate drain
• No seasonal changeover required for cooling
The unit will cycle on and off, however,
system is recommended.
or heating -- units are self--contained comfort
dehumidification only takes place when the unit is
systems
operating. The result of this type of application in a
hot and/or humid climate would be a cool, yet
excessively humid, space.
4 5
4
PRODUCT OVERVIEW (E-TAC)
A
This section summarizes product features covered in detail in later sections of this manual.
W
re
an
ne
COIL TUBE
SHEETS
OUTDOOR
ORIFICE
WIRE SCREEN
INDOOR-AIR
INLET
FILTERS
ACCESSOR
OUTDOOR
GRILLE
INDOOR
COIL
FRONT
PANEL
BASEPAN
ACCESSORY
WALL
SLEEVE
Unit Components
E-TAC
DISCHARGE
GRILLE
N
T
(E
ar
in
in
fr
A
C
D
• Two--Piece
Filter Design -- Provides improved air
Silencer
System
• Power CordDigital
or Hardwire
Kit – Power cord or
Comfortouch
Control
hardwire kit to match voltage and amperage of
• Temperature
Display and Touch Pad on Unit
electrical circuit.
• Precise
and easy-to-use
Polymer,
Metal or Extended Wall Sleeve -• CDesigned
ontinuous for
Temperature
Sensing
rugged duty,
acoustic absorption,
and comfort
attractive
Ideal
forappearance
your guestsfor years to come.
Compressors
-- Modes
Provide quiet, reliable
•• CRotary
ooling, Heating
and Fan
operation.
One unit for all seasons
CopperStoppers
Tube Aluminum Fin Coils -- Enhanced
•• Setpoint
coils
provide
durability,
high
performance,
and
Electronic temperature
limiting
reduces
operating costs
ease of operation.
• Auto Restart and Random Restart Delay
• Fresh Air Control Arm -- Allows outdoor air into
Automatically restarts after a power failure
room through vent filter for improved air quality.
•• Freeze
Protection
Control
Door -- Provides protection for controls
Protects
unoccupied
rooms from freezing
and enhances
appearance.
temperatures
• Condensate Removal - Minimizes condensate
• Emergency
Heat (Heat
Pump Models)
water on outside
of building.
Bypasses compressor operation and activates electric
heater for guest comfort
• Remote Control Options
The ultimate in installation flexibility; Wired,
Wireless or Energy Management
filtration and can be removed easily for cleaning.
• Three-Speed Indoor Fan
• Louvered Front Panel -- Made of high impact
More comfort options for guests to choose from
polystyrene. Provides improved performance and
• Dual
Technology
quietMotor
operation.
Separate indoor and outdoor motors allows one of the
• Digital Control Pad with Electronic Display -quietest
mostmode,
efficient
the set
industry
Easy toand
select:
fanunits
speedinand
point with
• AeroQuiet
Indoor
Blower
Wheel
an easy to read electronic display. In ˚ F or ˚ C.
• Provides
quiet and
forthe
maximum
Configuration
Dipconsistent
Switchesairflow
-- Setup
system
guest
comfort
perfect
for the exact application.
• Rotary
Compressor Interface
Technology
Wall Thermostat
-- A terminal block
for wiring
up aand
walllow
thermostat
that is easyindoors
to wire
Quiet
operation
sound transmission
to and isBulkhead
easy to remove.
•Insulated
Between Indoors and Outdoors
EM operation
(Energy Management)
Interface -- indoors
A plug
• Quiet
and low sound transmission
for connecting to an Energy Management system or
Front Desk Control. Easy to wire to and easy to
Smartfan
Comfort Control
remove.
• Programmable Constant Fan Operation
Gree Customized Comfort in heating orcooling
modes
• Quiet Fan Start-Up and Stops
Smooth ramp-up and ramp-down of fan speed for
quiet comfort
5
7
In
E-TAC
PRODUCT FEATURES AND BENEFITS
APPLICATIONS
E-TAC
or
replacing
packaged
terminal
air
conditioning
units
in
All E-TACs are protected by a five-year limited
an existing building, Gree E-TAC will meet your
warranty.
needs.
• Two-year parts and labor limited warranty
• years
Hotelsadditional
and motels
• Three
parts and labor coverage on
Nursing
homessystem
and assisted living care
the•sealed
refrigeration
centers
• Limited three years (years 3-5) parts-only coverage
• Offices
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
TWOLIFETIME INDOOR
NEW-PIECE
CONSTRUCTION
FILTER
The Gree E-TAC Packaged Terminal Air Conditioning
Two-piece
removable
filters
slide
in and
(E-TAC)
unit
is designed
to easily
meet the
needs
of out
the
from
the
front
of
the
E-TAC
unit
and
are
architect, engineer, and contractor. For unit
interchangeable.
The
frontsupport
panel does
not need
to be
installation, Gree’s
expert
network
will assist
removed
to
access
or
change
the
filters.
The
filters
are
in all applicable aspects of the construction project,
washable
and
permanent.
from preparing a budget to start-up.
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
• Whisper--quiet performance, indoors and out
• No bulky duct system
EASY
ACCESS
TO CHASSIS
• No
separate equipment
room
Access
to
the
chassis
simply
requires
removing
front
• No water towers or additional
cooling
panel, then
four
easy
to
access
screws
and
then
equipment
sliding the chassis out of the sleeve for service or
• No complex match--up of different HVAC
maintenance.
components
• Less sensitivity to building orientation (sun,
wind, shade)
• Optional architectural grille to permit custom
exterior appearance
Lower Operating Costs and Reliable Comfort
for The Occupant
•
E-TAC GB Series
Packaged Terminal Air Conditioner
Limited Warranty
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Exclusive
Each unit
operatesWarranty
independently of other
units in the building. No dependency by
building on central HVAC system.
2 Air filters
TWO-YEAR PARTS AND LABOR LIMITED WARRANTY – During the first two years
after purchase, GREE will, through its authorized independent servicing dealer or service
stations*, and free of charge to the user or subsequent users, repair or replace any parts
that fail due to defect in material or workmanship. The replacement part can be a new or
remanufactured part as provided at GREE’S sole option.
EXTENDED THREE-YEAR PARTS AND LABOR LIMITED WARRANTY ON SEALED
REFRIGERATION SYSTEM ONLY – During the third through fifth years after date
of original purchase, GREE will, through its authorized servicing dealers and service
stations* and free of charge to the end user or subsequent users, repair or replace the
compressor, condenser, evaporator or connecting tubing if it failed due to defect in material
or workmanship. This includes system refrigeration charge. The replacement part can be
new or a remanufactured part at GREE’S sole option.
•
•
EXTENDED THREE-YEAR PARTS ONLY LIMITED WARRANTY ON NON-SEALED
REFRIGERATION SYSTEM ONLY – During the third through fifth years after date of original
purchase, Gree will, through its authorized servicing dealers and service stations and free
of charge to the end user or subsequent users, repair or replace any non-sealed system
part (motor, solenoid, thermistor, circuit boards, relays, switch, capacitor, overload, drain
valve, fan, stator) if failed due to defect in material or workmanship. The replacement part
can be new or a remanufactured part at GREE’S sole option. THIS LIMITED WARRANTY
DOES NOT INCLUDE LABOR, user is responsible for labor, including cost of diagnosis of
problem, removal and transportation of the air conditioner to and from the service center,
and reinstallation charges necessary to accomplish repair.
LIMITATION OF WARRANTIES – ALL IMPLIED WARRANTIES (INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR USE OR
PURPOSE) ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH
EACH LIMITED WARRANTY IS GIVEN AND APPLIES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. THE EXPRESSED WARRANTIES MADE IN
THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, OR
CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON WHATSOEVER.
GREE WILL NOT BE RESPONSIBLE FOR:
1. CLEANING REQUIRED PRIOR TO WARRANTY REPAIR.
2. Standard maintenance, cleaning or damage resulting from failure to perform
normal maintenance as outlined in the owner’s manual.
3. Instruction on methods of control and use of air conditioning unit after initial
installation.
4. Damage or repairs needed as consequence of faulty installation or application.
This is the responsibility of the installer.
5. Failure to start due to voltage conditions, blown fuses, open circuit breakers or any
other damages due to the inadequacy or interruption of electrical services.
6. Damage or repairs needed as consequence of any misapplication, abuse,
unauthorized alteration, improper servicing or operation.
7. Damage as a result of floods, winds, fires, lightning, accidents, corrosive
environment, or other conditions beyond the control of GREE.
EXCEPTION TO CORROSIVE ENVIRONMENT EXCLUSION IN ABOVE
PARAGRAPH – Packed terminal units (GB Series) built with corrosion protection
are exempt from the exclusion – “Corrosive Environment.” The unit model number
is identified on the nameplate with CP suffix.
8. Reimbursement for replacement parts or repair services which are not supplied or
designated by GREE and which are specifically covered under this warranty.
9. GREE products installed outside the continental U.S.A., Alaska, Hawaii, and
Canada.
10. Shipping damage or damage as a result of transporting the unit. This is the
responsibility of the selling dealer or the authorized service station.
11. ANY SPECIAL, INDIRECT OR CONSEQUENTIAL PROPERTY OR
COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
12. Warranty coverage of accessory items (wall thermostats, wall sleeves, etc.)
13. Installations of non-corrosion protected models within one (1) mile of a corrosive
body of water or environment shall void the EXTENDED THREE-YEAR PARTS
AND LABOR LIMITED WARRANTY ON SEALED REFRIGERATION SYSTEM
ONLY and EXTENDED THREE-YEAR PARTS ONLY LIMITED WARRANTY ON
NON-SEALED REFRIGERATION SYSTEM ONLY limited warranties .
ALL WORK UNDER THE TERMS OF THIS WARRANTY SHALL BE PERFORMED
DURING NORMAL WORKING HOURS. ALL REPLACEMENT PARTS, WHETHER
NEW OR REMANUFACTURED, ASSUME AS THEIR WARRANTY PERIOD ONLY THE
REMAINING TIME PERIOD OF THIS WARRANTY.
*Authorized independent dealers or service stations are registered with Gree through its distributor organization.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Edition Date: 11-11
•
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
Two -- Piece Indoor Filter
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
Easy to Access Chassis
A07057
Initial Cost Savings for the Building Owner
OUTDOOR
AIR VENTILATION
• No expensive
component HVAC system
purchase
The unique vent system is activated by a two• No
equipment
room air or
maintenance
position
control.
Fresh outside
is redirected
by
engineering
staff
the vent door to the indoor room. A molded plastic
Two--partdirtdelivery
to from
minimize
on--site
filter• prevents
and debris
entering
the
damage
room side
of the unit. The vent mechanism is made
from• non
corrosive
material
ensuring
Weather-protected
wall sleeve
that reliable
goes in
operation.
Amagnet
the door and
high-pressure
place
during on
construction;
chassis
that slides
airflow create
tight,construction
draft free seal when the vent
in placea after
door• is closed.
No seasonal changeover required for cooling
or heating -- units are self--contained comfort
The vent
will provide up to 65 cfm of fresh air.
systems
Outdoor Air Ventilation
6 8
4
A07550
GA
Whether 5-YEAR
you are designing
a new structure
E-TAC
WARRANTY
BI--DIRECTIONAL DISCHARGE
GRILLE
A
Air discharge outward (Default)
Air discharge upward
W
re
an
ne
The discharge grille is constructed of durable
polycarbonate and is reversible. Air flows upward at a
40 degree angle to the floor but can easily be adjusted
to an 80 degree angle to the floor.
Bi-Directional Discharge Grille
SYSTEM CONFIGURATION
Dipswitch
E-TAC
UP
Down
There are many different configuration possibilities,
through both dip switches and the digital keypad, that
allow you to configure the E-TAC for your exact
application. See Owner’s Manual for more detailed
information.
Freeze guard
Setpoint Limit 2
Setpoint Limit 1
Fan CON/CYC for cooling
Fan CON/CYC for heating
Wall Thermostat enable
Electric heat only (for Heat Pumps)
A07072
Configuration Switches
COMFORTOUCH DIGITAL
CONTROL
N
T
(E
ar
in
in
fr
A
C
D
DRY
The digital keypad provides a simple to operate
control. The large, easy to press, “On/Off”, “Fan
Speed”, “Mode”, “Setpoint Up” and “Setpoint Down”
buttons make the control easy to operate. LEDs are
used to show the operating conditions selected.
Large numbers are used to display the Setpoint, and if
configured, room air temperature.
TEMP CONTROL
FAN, MODE& OPERATION
Comfortouch Display
STAY DRY DEHUMIDIFICATION
The E-TAC provide users with Stay Dry mode to
reduce the humidity in the room, making it more
comfortable.
In
The Stay Dry mode is designed to assist removing
extra moisture from the air, not dry it out
completely. This is not intended to replace a
dehumidifier or act as a dehumidifier.
Stay Dry Mode
SLEEP MODE
The E-TAC sleep mode function is geared toward
making sleeping conditions more pleasant without
your having to get up and adjust the unit while in
bed. The sleep mode feature allows a time period
between 0.5 to 24 hours for the E-TAC to
automatically turn off for a pleasant sleeping
experience.
7
Sleep Mode
SETPOINT
STOPPER
APPLICATIONS
The
E-TAC
allows
owners
and structure
operators to
Whether
you
are building
designing
a new
or
set
an
allowable
setpoint
range
for
heating
replacing packaged terminal air conditioning unitsand
in
cooling,
operative
to
maintain
room
temperature
to
an existing building, Gree E-TAC will meet your
aneeds.
limited setpoint range and save energy. The
E-TAC comes from factory with economical
• of
Hotels
and The
motels
settings
65-78˚.
cooling and heating setpoint
•
Nursing
homes
and assistedandliving
care
limits may be adjusted independently
the range
centers
may be expanded or reduced to satisfy your needs
• Offices
and application.
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
Lower Operating Costs and Reliable Comfort
78 F
The Occupant
65for
F
•
•
•
E-TAC
WALL THERMOSTAT INTERFACE
E-TAC provides a standard wired wall thermostat
NEW connecting
CONSTRUCTION
interface
block for quick easy installation.
The
Gree
E-TAC
Packaged
Terminalconnector
Air Conditioning
The unit has a removable terminal
to make
(E-TAC)
unit
is
designed
to
meet
the
needs
of the
field wiring easy. See more info on wall
thermostat
architect, engineer,
and contractor.
For Instalunit
connections
in the Dimensional
Drawings and
installation,
Gree’s
expert
support
network
will
assist
lation Data Section.
in all applicable aspects of the construction project,
from preparing a budget to start-up.
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
ENERGY
MANAGEMENT
• No complex match--up of different HVAC
INTERFACE
components
The •Energy
is standard (sun,
and
Less Management
sensitivity to interface
building orientation
provideswind,
a simple
shade)to install Energy Management
connection.
The architectural
unit has agrille
removable
• Optional
to permitterminal
custom
connector
to
make
field
wiring
easy.
When 24VAC is
exterior appearance
supplied to the input the unit will turn off. Once the
Initial Cost Savings for the Building Owner
24VAC is removed (becomes 0 volts), the unit will
turn •backNo
on. expensive component HVAC system
purchase
Note: For more info, see the section in the back,
• No equipment room or maintenance
Typical Wiring Schematic For Energy
engineering staff
Management Interface.
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
•
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual
units
allow tenants
to choose the
Electronic
Setpoint
Limiting
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
R W Y O Gh Gl C
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Removable
Use an existing
sleeve andConnector
exterior grille. The
Thermostat
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
A07073
A07634
Energy Management
Terminal Connections
Wall Thermostat
Terminal Connections
Wall Thermostat and Energy Management
Interface
8 10
4
A
LCDI POWER CORD PROTECTION
The power cord for the 208/230--v unit provides
LCDI protection by automatically disconnecting
power during an unsafe condition. Power can be
be restored by pressing the RESET button.
W
re
an
ne
A07551
LCDI Power Cord Plug Head
SEAMLESS BASEPAN
E-TAC
GA
Seamless drawn basepan add protection against water
accumulation resulting from storm-driven rain with
heavy wind. Gree’s deep basepan hold up to 1-3/4
gallons (6.6 liters) of water without spilling.
CONDENSATE DRAIN VALVE
The temperature--activated drain valve opens when
the outdoor temperature drops below 55˚ F (12.8˚ C)
to prevent water from freezing in the basepan.
A07550
Condensate Drain Valve Prevents Water
from Freezing in Basepan
N
T
(E
ar
in
in
fr
A
C
D
CONDENSATE REMOVAL
Gree’s E-TAC has a new condensate (water) disposal
system. The suction pull, along with the slinger ring,
draws in water which is sprayed up onto the outdoor
coil. The water then evaporates, thus providing better
disposal of excess condensate and improving unit
efficiency.
NOTE: If it is necessary to control 100% of the
condensate, the Drain Kit (Part No.: DRAIN-KIT-1PK)
is recommended.
SLINGER
RING
In
CONDENSER SECTION
A07678
Condensate Removal System
9 12
ct
ion
Lower Operating Costs and Reliable Comfort
for
The Occupant
o
as
t Prote
• Heat
c
The
Gree Coastal
featuresa a new
corrosion-resistant
Whether
you areE-TAC
designing
structure or
coating
that
exceeds
the
performance
and protection
replacing packaged terminal air conditioning
units in
of
other
products
of
this
kind
on
the
market.
The
an existing building, Gree E-TAC will meet your
coating
provides
the
salt
air
corrosion
protection
needs.
giving you the added reliability in your business.
• Hotels and motels
• the
Nursing
homes
and assisted
care
Install
best in
corrosion
protectionliving
for your
centers
property, without the worry of performance
• Offices
degradation,
coating breakdown or shortened life.
• Apartments
Gree’s
Units are
made with a blue-colored
• Coastal
Single--family
dwellings
anti-corrosion epoxy treated to resist corrosion. This
• Home conversions and residential add--ons
technology maintains excellent heat transfer
properties while extending the coil life against
NEW from
CONSTRUCTION
damage
salt air and salt water in seacoast
installations.
ThisPackaged
is a tough
epoxy
coating that
The Gree E-TAC
Terminal
Air Conditioning
uniformly
covers
the outside
surface
with aofthick
(E-TAC) unit
is designed
tocoil
meet
the needs
the
.5
to 1.0 mil
layer ofand
protection.
This For
advanced
architect,
engineer,
contractor.
unit
material
is Gree’s
highlyexpert
flexible,
eliminating
cracking
installation,
support
network will
assist
problems
with traditional
and dipped project,
coils.
in all applicable
aspects coatings
of the construction
from preparing a budget to start-up.
rtified
Ce
Sea
GA
E-TAC
COASTAL
PROTECTION
APPLICATIONS
•
•
•
pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
A09078
Corrosion Protection
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
ADVANTAGES FOR NEW
CONSTRUCTION
COASTAL
PREMIUM
PROTECTION
Design Flexibility
for the Architect/Engineer
• Condenser
Coils
areperformance,
coated with
a corrosion
• Whisper-quiet
indoors
and out
resistant
epoxy
resin
providing
enhanced
• No bulky duct system
resistance to acidic and salt air conditions.
• No separate equipment room
• 1500 hr salt spray tested.
• No water towers or additional cooling
• Durable non-corrosive fan wheel and shroud.
equipment
• Added protection with durable powder coated paint.
No complex
-up of different
HVAC
• All• exposed
fastenersmatchmanufactured
of high quality
components
stainless steel.
• Less sensitivity to building orientation (sun,
NOTE: wind,
Refer shade)
to the product warranty for reduced
warranty
coverage
on standard
• Optional architectural
grille to non-corrosion
permit custom
protectedexterior
units installed
within
one mile of the of the
appearance
sea coast or within a corrosive environment.
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
10
4
13
HEAT PUMPS PAY THEIR
OWN WAY
A
HOW THE HEAT PUMP WORKS
W
re
an
ne
Heat pump models are available at a nominal
additional cost. In many locales, the payback is
realized in just a few months
SPECIAL FEATURES
Two- Stage Thermostat:
Outdoor Thermostat:
During the heating cycle, the outdoor thermostat
senses outdoor coil temperature. It switches the unit
to electric heat mode when the outdoor coil
temperature is 28˚ F (--2.2˚ C) or below for one
minute. The thermostat switches the unit back to heat
pump mode when the outdoor coil temperature rises
above 40˚ F (4.4˚ C) for ten minutes, which is enough
to provide heat to meet demand. The entire operation
is completely automatic.
A07553
In Hot Weather:
Gree’s E-TAC units provide indoor comfort in the
same manner as conventional air conditioners,
removing heat and humidity fromindoor air. The heat
and humidity is released to the outdoors. Gree’s high
efficiency design saves energy and reduces cooling
costs.
Manual Compressor Override Configuration:
N
T
(E
ar
in
in
fr
A
C
D
Reversing Valve:
The reversing valve provides quiet refrigerant flow
when energized in heating mode. The valve controls
the direction of refrigerant flow for both heating and
cooling functions and remains energized as long as
the controls are in the heat position. When the
cooling controls are activated, the valve automatically
reverses to the cooling position.
E-TAC
GA
The indoor thermostat senses the indoor temperature
and automatically turns on the electric heat to warm
the room quickly. After the desired temperature
conditions have been satisfied, the thermostat
automatically switches to heat pump mode. If
compressor failure occurs, thethermostat will provide
backup electric heat automatically.
A07553
In Cool Weather:
When the outdoor coil temperature is above 28˚ F
(--2.2˚ C), the heat pump draws heat from outdoor air
and uses it to heat indoor air. Since heat is transferred
and not produced, Gree’s heat pump uses less
electricity and reduces energy costs significantly.
This configuration dip switch completely locks out
the compressor. See Owners Manual for more
details.Note that the compressor and heater do not
operate at the same time, thus conserving energy.
In
A07554
In Sub- Freezing Weather:
When the outdoor coil temperature falls below 28˚ F
(--2.2˚ C) for one minute, the unit automatically
switches on a built--in electric heater. The compressor
stops and the indoor fan circulates warm air produced
by the heater. When the outdoor coil temperature rises
above 40˚ F (4.4˚ C) for ten minutes, heat pump
operation resumes automatically.
11 14
FIELD--INSTALLED ACCESSORIES
All polymer wall sleeves are made from a molded
polymer that is designed for strength and durability.
This material has excellent corrosion resistance and a
flammability rating of UL94--5V.
The sleeve surface is textured to prevent shine and
hide scratches. The rib configuration on the sleeve
bottom allows easy chassis removal and aids in
drainage
c
For the best performance and longest life, Gree
recommends genuine polymer wall sleeves for all
installations.
oa
ct
S ea
POLYMER WALL SLEEVES
ion
rtified
Ce
st Prote
The locating holes in the side and top panels allow for
easy fastening of the sleeve to wall openings. Refer to
dimension drawings in Typical Wall Installation
and Dimension section.
The sleeve’s alpine mist color (a shade of beige)
closely matches the front panel and blends in well
with any inside or outside decor. The polymer wall
sleeve comes in both insulated (factory installed) or
non-insulated, to meet the requirements of every
application.
Insulated Polymer Wall Sleeve
Part No.: SLEEVE--INSUL--1PK
Gree’s accessory insulated polymer wall sleeve,
with factory--installed insulation, provides superior
sound absorption, reduces heat loss and prevents
sleeve sweating, a condition that can occur when the
outside temperature is cold and the indoor conditions
are warm and humid.
42 in
(1067 mm)
16 in
(406 mm)
Non--Insulated Polymer Wall Sleeve
Part No.: WALL--SLEEVE--1PK
Gree’s accessory non-insulated polymer wall sleeve
provides a superior appearance and protection for
many applications.
14 7/8 in
(378 mm)
A07633
Corrosion-Protected Polymer Sleeve
IMPORTANT For applications where weather
conditions could influence sleeve sweating, a
condition that can occur when the outside
temperature is cold and the indoor conditions are
warm and humid, the Insulated Polymer Wall
Sleeve should be considered.
12 15
FIELD--INSTALLED ACCESSORIES (CONT.)
GA
Metal Insulated Wall Sleeves
42 in
(1067)
Part No.: SLEEVE--STEEL--1PK
SLEEVE--EXT18--1PK
SLEEVE--EXT24--1PK
SLEEVE--EXT26--1PK
SLEEVE--EXT28--1PK
Gree’s metal wall sleeves are available in a variety
of sizes for most applications and difficult
installations. Choose from 14--3/4 in., 18 in., 24 in.,
26 in., or 28 in. (375 mm, 457mm, 610 mm, 660 mm,
and 711 mm) standard depth sizes. All metal wall
sleeves come with factory--installed insulation,
designed to minimize heat loss, reduce outdoor noise
transmissions into the room and prevent sleeve
sweating. In addition, the metal wall sleeve provides
a flammability rating higher than UL94--5V.
16 in
(406)
Available in:
14-3/4 in. (375),
18 in. (457),
24 in. (610),
26 in. (660),
28 in. (711)
Amounts in ( ) = mm
A07381
Metal Wall Sleeve
Wall Sleeve Molding Kit
1 IN.
(25.4 mm)
Part No.: SLEEVE–MOLDING
For a superior look and to hide any construction
imperfections, use Gree’s wall sleeve molding kit to
trim the wall sleeve to the wall. The molding kit is a
perfect solution and can be used with any Gree wall
sleeve (matches wall sleeve color).
1/2 IN.
(12.7 mm)
A08395
Wall Sleeve Molding Kit
Friedrich (and ZoneAire) Retrofit Wall Sleeve
Adapter
Part No.: FR--SLEEVE--EXT
The Friedrich (and ZoneAire) wall sleeve adapter is
constructed of metal and is designed to increase the
depth of an existing Friedrich T-series or ZoneAire wall
sleeve to accommodate all industry standard PTAC
units.
16 IN.
(406.4 mm)
42 IN.
(1067 mm)
3 IN.
(76.2 mm)
A08396
Friedrich Wall Sleeve Adapter Kit
13
16
FIELDAPPLICATIONS
-INSTALLED ACCESSORIES (CONT.)
•
•
•
•
ion
ct
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each
unit Architectural
operates independently
Polymer
Grille of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
Aluminum Architectural Grille
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
Standard Outdoor Aluminum Grille
Initial
Cost
Savings
for -STAMP
the Building Owner
Part
No.:
GRILLE-ALUNo
expensive
component
HVAC
This•cost-effective,
one--piece
standard
grille issystem
made
purchase
from durable anodized aluminum. The grille is
• No has
equipment
roomand or
maintenance
lightweight,
a clear finish,
is easy
to install
engineering
staff
from inside the room.
• Two--part delivery to minimize on--site
damage
IMPORTANT:
Gree recommends only the
use
Gree-supplied
for usethat
withgoes
the in
• of
Weather-protectedgrilles
wall sleeve
E-TAC
units.
However,
the architectural
designs
place
during
construction;
chassis that
slides
in place after
of a building
may construction
dictate the use of special or
oversized
grilles and/or
louvers.
Specialfor
louvers
• No seasonal
changeover
required
cooling
or any
special --architectural
treatment
the
or heating
units are self-containedofcomfort
building
facade that may restrict free circulation
systems
of condenser airflow should be referred to Gree
Corporation for evaluation and approval.
See Sizing Outdoor Grille Selection.
Standard Grille
14 17
4
GA
E-TAC
Lower Operating Costs and Reliable Comfort
for The Occupant oast Prote
c
a new structure or
replacing packaged terminal air conditioning units in
Polymeric Architectural Outdoor Grilles
an existing building, Gree E-TAC will meet your
(Louvered)
needs.
Part •No.:Hotels
GRILLEand -PLAmotels-BEIGE
GRILLE-PLA--ALPIN
• Nursing
homes
and assisted living care
(color
matches
Gree’s polymer wall sleeve)
centers
GRILLE-PLA-BROWN
• Offices
GRILLE-PLA-WHITE
• Apartments
This value line of polymeric architectural outdoor
• will
Single-family
dwellings with most building
grilles
blend
attractively
•
Home
conversions
and residential
-onsthe
exteriors. Mounted easily from
inside theaddroom,
one--piece, molded grille is designed for protection,
enhanced
and superior weather-resistance.
NEW appearance,
CONSTRUCTION
The grille is made of durable polymer and has a
The Gree E-TAC Packaged Terminal Air Conditioning
colorfast, lightly textured finish that blends well with
(E-TAC) unit is designed to meet the needs of the
most exterior finishes.
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
Aluminum
Architectural
in all applicable
aspects of the construction project,
Outdoor
Grilles
(Louvered)
from preparing a budget
to start-up.
Part No.: GRILLE--ALU--CLEAR (anodized aluminum)
ADVANTAGES
FOR -WHITE
NEW
GRILLE--ALUCONSTRUCTION
GRILLE--ALU--BEIGE
Design Flexibility
for the
Architect/Engineer
GRILLE--ALU-ALPIN
• Whisper-quiet performance,
indoors
out
(color matches
Gree’s polymer
walland
sleeve)
(additonal
colors
available)
• No bulky duct system
No separate
This•premium
line ofequipment
decorativeroom
outdoor grilles will
enhance
the appearance
of anyor building.
The cooling
grilles
• No
water towers
additional
are made
of strong, durable, extruded, anodized
equipment
aluminum
are designed
to-up
be mounted
easilyHVAC
from
• Noandcomplex
matchof different
inside the
room. These elegant grilles, available in
components
many• standard
colors, have
baked enamel
finishes
Less sensitivity
to building
orientation
(sun,
®
resin,
for
a
superior
finish
that
containing
50%
Kynar
wind, shade)
will withstand the most extreme conditions.
• Optional architectural grille to permit custom
exterior appearance
Sea
OUTDOOR
GRILLES
Whether you are
designing
rtified
Ce
FIELD--INSTALLED ACCESSORIES (CONT.)
A
SUBBASE
W
re
an
ne
IMPORTANT: All standard cord--connected
265-v E-TAC units will require a
field--installed electrical subbase accessory
per UL and NEC electrical codes.
Part No.: PTACSUBBASE--A
The easy to install, non--electrical subbase provides
mechanical support and requires no wiring.
All subbase models are pre--assembled, mount to the
wall sleeve, and come with adjustable legs and side
skirting to provide a finished appearance.
A subbase (or leveling legs) is required for
installations where the wall sleeve extends 4 or more
inches into the room or the wall is less than 2 in.
(50.8 mm) thick. The minimum clearance between
the bottom of the sleeve and the floor is 3--1/4 in.
(82.6 mm), and the maximum clearance is 5--1/2
(139.7 mm) inches.
E-TAC
GA
Non -- Electrical Subbase Assembly
Electrical Subbase Modules
Upgrade non-electrical subbase to a fully electrical
subbase by add a Electrical Subbase module.
The electrical subbase modules have an electrical
junction box, receptacle outlet, and cover plate.
Part No: PTAC-REC-230V15-A
PTAC-REC-230V20-A
Electrical Subbase Modules
PTAC-REC-230V30-A
N
T
(E
ar
in
in
fr
A
C
D
PTAC-REC-265V15-A
PTAC-REC-265V20-A
PTAC-REC-265V30-A
PTAC-REC-HW-A
Subbase Fuse Kit
Part No.: PTAC--FUSE--15-A
PTAC--FUSE--20-A
PTAC--FUSE--30-A
The fuse kit provides in--line over--current protection
at the unit when required by NEC (National Electric
Code) or local codes.
In
Subbase Fuse Module
Subbase Power Disconnect Switch
Part No.: PTAC--SWITCH-A
The subbase power disconnect 2--pole switch
provides a recessed power disconnect for the PTAC
unit when required by NEC or local codes.
IMPORTANT: The fuse kits and disconnect
switch accessories can only be used with Part
No. PTAC-SUBBASE-A.
Power Disconnect Switch Module
15 19
FIELDAPPLICATIONS
-INSTALLED ACCESSORIES (CONT.)
Lower Operating Costs and Reliable Comfort
for The Occupant
E-TAC
Leveling
Legs are designing a new structure or
Whether you
replacing
packaged terminal
Part
No.: LEVELING-LEGSair conditioning units in
an existing
Gree to
E-TAC
will sleeve
meet your
Leveling
legsbuilding,
attach easily
the wall
and
needs.accurate leveling and support for units without
offer
a subbase.
Leveling
legs are adjustable from 3--1/4 to
• Hotels
and motels
5--1/2 inches (82.6 to 139.7 mm).
• Nursing homes and assisted living care
centers
• Offices
Hardwire
Kit
• Apartments
Part •No.:SingleHARDWIRE-KIT-1PK
-family dwellings
This • accessory
hardwire kit
a permanent
Home conversions
andprovides
residential
add--ons
connection to the unit. Electrical hard wiring is
required when NEC (National Electrical Code) or
NEW
CONSTRUCTION
local
codes
restrict the use of power cord and plug
The
Gree
E-TAC
Air Conditioning
connections. The Packaged
hardwire Terminal
kit mounts
on the front
(E-TAC)
unit
is
designed
to
meet
the
needs
of the
right side of the unit and comes with 36
inches
of
architect,
contractor.
unit
flexible
steelengineer,
conduit andand
a Molex
connectorFor
for easy
installation, Gree’s expert support network will assist
connect/disconnect.
in all applicable aspects of the construction project,
from preparing a budget to start-up.
•
•
•
•
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of Leveling
comfort andLegs
operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
Hardwire Kit
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing
sleeve and exterior grille. The
Conduit Interface Kit
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
Conduit
InterfaceFOR
Kit NEW
ADVANTAGES
Part
No.: CONDUIT-INTF-4PK
CONSTRUCTION
The
conduit
interface for
accessory
kit provides the wire
Design
Flexibility
the Architect/Engineer
connection to the unit to interface to existing
• Whisperinstalled
conduit.-quiet performance, indoors and out
• No bulky duct system
• No separate equipment room
• No265v
water
towers
Ancillary
Power
Cordor additional cooling
equipment
Part No. PTAC-CORD-15A
• No complex match--up of different HVAC
PTAC-CORD-20A
components
PTAC
CORD-30A
• Less
sensitivity
to building orientation (sun,
The Ancillary
265v power cord extends 58 inches
wind, shade)
from• bottom
of front
panel to the
plug
head. Do
not
Optional
architectural
grille
to permit
custom
use where
prohibited
by
codes
or
regulations.
exterior appearance
Ancillary 265V
Power Cord
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
16
4
FIELD--INSTALLED ACCESSORIES (CONT.)
THERMOSTATS
Gree’s full line of wall thermostats are designed to
enhance every E-TAC application. The TopTech Comfort Series of thermostats consists of programmable
and non-programmable air conditioner and heat pump
controls. Wall thermostats are simple and easy to use.
Wall thermostats provide better temperature and
A
W
re
an
ne
humidity control as they can be placed in an optimal
position in the room.
For wiring multiple E-TAC units to one wall thermostat see the Multiple Wall Thermostat Wiring section.
Non--Programmable Thermostat
E-TAC
GA
Part No.: TT-N-411 (Heat / Cool Models)
TT-N-421 (Heat Pump Models)
This low--voltage, easy--to--use non--programmable
thermostat provides maximum guest comfort.
• Dual Powered – Hardwired or Battery
• Large Display with Bright Blue Backlight
• Adjustable Temperature Set Point Limits
• Non-Volatile Memory Retains User Settings
• Separate Heating and Cooling Set Points
• Display Degree F or C Switch
• Mount to Horizontal Box
• Adjustable Temperature Differential
Non -- Programmable Thermostat
N
T
(E
ar
in
in
fr
A
C
D
Digital Programmable Thermostat
Part No.: TT-P-411 (Heat / Cool Models)
TT-P-421 (Heat Pump Models)
This micro computer controlled, 7--day
programmable wall thermostat has enhanced features
for both heat pumps and heating/cooling units.
The
programmable
model
includes
the
non--programmable features plus the following:
• 5-2 Day Separate Programming
• Adaptive Recovery Mode (ARM™)
• Separate Set Point Program Times
• Temporary Program Override
• Programmable Extended Hold Mode
• Meets California Title 24 Guidelines
Programmable Thermostat
In
Wireless Non-Programmable Thermostat
Part No.: TT-N-631W (for Heat Pump & Heat /Cool
Models)
This low voltage wireless wall thermostat provides
easy installation and superior performance. Includes
both wireless wall thermostat and receiver module and
features:
• Two speed fan control (High and Low Speed)
• Universal 2H/1C Heat Pump or 1H/1C Conventional
• Power Loss Memory
• Heating and Cooling Set-point Limit
• Large Temperature and Set-point Display
• Large Blue Backlight Screen
17 21
FIELD-INSTALLEDACCESSORIES
(CONT.)
APPLICATIONS
Lower Operating Costs and Reliable Comfort
for The Occupant
Air
Deflector
Whether
you are designing a new structure or
replacing
packaged terminal air conditioning units in
Part
No.: PTAC-DEFLECTOR-A
an existing
building,
Gree
E-TACeasily
will tomeet
The
PTAC Air
Deflector
mounts
the your
units
needs.
and directs air up and away from overhanging drapes.
• Deflector
Hotels andsaves
motels
The Air
energy by eliminating trapped
• Nursing
and and
assisted
living while
care
air flow
between homes
the window
the curtain
centers
increasing guest comfort levels and helping to manage
mold• andOffices
mildew in the window area.
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
•
•
•
•
E-TAC
Sound Muzzler
NEW CONSTRUCTION
Part No.: PTAC-SOUND-A
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can
replaced in minutes without
AirbeDeflector
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
Our Sound Muzzler is specifically designed and
The Gree E-TAC Packaged Terminal Air Conditioning
constructed
with
friendly
(E-TAC) unit
is environmental
designed to meet
the materials
needs of that
the
absorb
mechanical
sound
energy
and
block
offensive
architect, engineer, and contractor. For unit
noise
from Gree’s
the compressor.
Thisnetwork
acousticwill
wrap
is
installation,
expert support
assist
weatherproof
and aspects
easy to install.
in all applicable
of the construction project,
from preparing a budget to start-up.
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
Sound Muzzler
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
Security
extension
(see Door
accessory Friedrich
Retrofit Wall Sleeve Adapter).
ADVANTAGES FOR NEW
Security
Door
CONSTRUCTION
Part
No.:Flexibility
PTAC-LOCK-A
Design
for the Architect/Engineer
Whisper--quietsecurity
performance,
and out
This• key-locking
door indoors
kit prevents
unauthorized
access
to
the
unit’s
heating
and
cooling
• No bulky duct system
controls
andseparate
preventsequipment
tamperingroom
with units in public
• No
locations
and
institutions.
This
field-installed
• No water towers or additionalaccessory
cooling
includes equipment
a control door with lock assembly and two
matching
keys.
• No
complex match--up of different HVAC
components
• Less sensitivity to building orientation (sun,
wind, shade)
• Optional
architectural
grille to permit custom
E-9000
REMOTE
CONTROL
exterior appearance
Part No. 30510092MX
Initial Cost Savings for the Building Owner
The E-9000 remote control is versatility and allows
expensive
component and
HVAC
users• to No
change
room temperature
modessystem
from
purchase
the palm of your hand. The large LCD display
No equipment
or maintenance
and • buttons
makes it room
easy-to-understand
and
engineering
staff
easy-to-use.
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
E-9000 Remote Control
18
4
FIELD--INSTALLED ACCESSORIES (CONT.)
W
re
an
ne
IMPORTANT: For internal drains installed
in the plastic wall sleeve, the drain must be
installed on the flat area of the sleeve. It
cannot be installed in the wafer area.
Part No.: DRAIN--KIT--1PK
This universal drain kit may be used internally or
externally to route condensate to a drainage system. It
can be field-installed on any Gree wall sleeve.
Although Gree units are designed to dissipate all the
condensate generated during normal cooling, there
may be times when abnormal conditions cause more
condensate than the unit can dissipate. If condensate
that drips from the wall sleeve is objectionable, this
internal/external drain kit should be installed.
The drain kit may be attached to the exterior right or
left side of the wall sleeve for external draining or
mounted to the room side of the wall sleeve for
internal draining.
A 3 in. (152.4 mm) straight tube and 90˚ curved tube
are supplied to simplify any application (1/2 in. /
12.7 mm OD copper).
E-TAC
GA
Condensate Drain Kit
A
A07748
Drain Kit
Replacement Filters
N
T
(E
ar
in
in
fr
A
C
D
Part No.: GA-FILTER-10PK
The Gree E-TAC model replacement air filters come
in packages of 10. The filters save energy by
preventing the evaporator coils from being plugged
with dirt and lint. These economical and sturdy filters
are interchangeable and may be washed, vacuumed,
and reused.
A07749
Replacement FIlters
Baffle Kit
Part No.: BAFFLE--KIT--1PK
The accessory baffle kit ensures a good seal between
the unit and the exterior grille to prevent air recirculation, which can cause system failure.
The accessory baffle kit is required for applications
where a Gree wall sleeve is used without a Gree authorized exterior grille.
In
A07275
Baffle Kit
19
22
FIELD-INSTALLEDACCESSORIES
(CONT.)
APPLICATIONS
Lower Operating Costs and Reliable Comfort
for The Occupant
Air
Knight
Whether
you are designing a new structure or
E-TAC
replacing
packaged
terminalisairanconditioning
in
The
Air Knight
by TopTech
air treatmentunits
system
an existing
Gree
E-TAC
willsmoke,
meet mold,
your
not
a filter. Itbuilding,
drastically
reduce
odors,
needs.
fungi, VOC’s (chemical odors) and bacteria found in
• Hotels and motels
• Nursing homes and assisted living care
Air Knight
Plug-In
centers
Offices
Part •No.: RGF-PIP-16-GA.
The •Air Apartments
Knight Plug-In, plugs directly into a wall
• and
Single-family
dwellings
outlet
can be
used with
or without its internal fan.
•
Home
conversions
and
residential
add--ons
Because it has its own outlets as part
of the unit,
you do
not lose the wall outlet.
many rooms. Airborne bacteria and mold reduction is
• Heat
pump
models offer substantial savings
normally
in the
90+ percentile.
over models with conventional electric
resistance heaters
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
Air Knight Plug In
NEW CONSTRUCTION
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
Air
Knight
(E-TAC)
unitPTAC
is designed to meet the needs of the
architect,
engineer, and contractor. For unit
Part
No: TT-AKPTAC
installation,
Gree’s
expert
support
network
will assist
The Air Knight
PTAC
mounts
inside
the E-TAC
air
in all applicable aspects of the construction project,
discharge steam. The indoor fan delivers air treatment
from preparing a budget to start-up.
quietly and affectively into the room. The PTAC Air
Knight
is never lost or
misplaced
ADVANTAGES
FOR
NEWsince it stays attached
to
the
unit.
CONSTRUCTION
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC
fit into:
Air will
Knight
PTAC
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
Design Flexibility for the Architect/Engineer
•
•
•
•
•
•
•
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
20
4
DIMENSIONAL DRAWINGS AND INSTALLATION DATA -NEW CONSTRUCTION
W
re
an
ne
If practices are unknown, consult your local architect
or building contractor. Installed wall sleeve must be
level from side to side and a quarter bubble to the
outside.
E-TAC
GA
Proper building practices must be used when
constructing a wall opening to support a PTAC wall
sleeve and chassis.
A
A08357
A08386
CURRENT
DIMENSIONS --- Inches (mm)
PLUG TYPE
Y
VOLTS
AMPS
Z
X
SUPPLIER 1
SUPPLIER 2
SUPPLIER 1
SUPPLIER 2
NEMA PLUG
NEMA
RECEPTACLE
208/230
15
58 (1473)
2.36 (60)
2.44 (62)
3.35 (85)
4 (101)
6--- 15P
6--- 15R
208/230
20
58 (1473)
2.36 (60)
2.44 (62)
3.35 (85)
4 (101)
6--- 20P
6--- 20R
208/230
30
58 (1473)
2.55 (65)
4 (101)
2.63 (67)
3.8 (96)
6--- 30P
6--- 30R
265
15
15 (381)
1.5 (38.2)
7--- 15P
7--- 15R
265
20
15 (381)
2 (50)
7--- 20P
7--- 20R
265
30
15 (381)
2.41 (61.3)
7--- 30P
7--- 30R
DISCHARGE
GRILLE
1.46 (37.3)
2.48 (63.2)
42"
(1067)
REMOVABLE
FRONT PANEL
In
ACCESSORY
WALL SLEEVE
HINGED CONTROL
ACCESS DOOR
208/230V
Accessory Service Cord
Z
Y
X
Front View
T
(E
ar
in
in
fr
A
C
D
DIMENSIONAL DRAWINGS AND INSTALLATION DATA
VOLTAGE
N
A08388
21 23
Side View
A07379A
DIMENSIONAL
APPLICATIONSDRAWINGS AND INSTALLATION DATA -Lower Operating Costs and Reliable Comfort
NEW
Whether CONSTRUCTION
you are designing a new (CONT.)
structure or
for The Occupant
replacing
packaged
terminal air DIMENSIONS
conditioning units
in STANDARD
WALL
SLEEVE
MOUNTING
FOR
AND ACCESSORY GRILLES
• Heat pump models offer substantial savings
an existing building, Gree E-TAC will meet your
42 in
42 in
over models (1067)
with
conventional electric
needs.
(1067 mm)
resistance heaters
• Hotels and motels
16 in
• Individual units allow tenants to(406)
choose the
• Nursing homes and assisted living care
degree of comfort and operating economy.
centers
• Rapid servicing reduces downtime: complete
16 in
• Offices
(406 mm)
chassis can be replaced in minutes
without
Available
in:
14-3/4 in. (375),
• Apartments
disrupting other occupants.
18 in. (457),
in. (610),
• Single--family dwellings
• Each unit operates independently24
of(660),
other
26 in.
28 in. (711) by
• Home conversions and residential
add-ons
units
in
the
building.
No
dependency
Amounts in ( ) = mm
14 7/8 in
(378 mm)
building on central HVAC system.
Standard
Polymer
Non-Insulated
Wall
Sleeve
Standard
and Extended Metal Insulated Wall
NEW
CONSTRUCTION
Standard Polymer Insulated Wall Sleeve
Sleeve
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
If you are replacing a unit in an existing wall sleeve,
(E-TAC) unit is designed to meet the needs of the
your options include:
architect, engineer, and contractor. For unit
• Replace the existing wall sleeve with the
installation, Gree’s expert support network will assist
the polymer wall sleeve. See accessory sleeve
in all applicable aspects of the construction project,
section for selecting the correct sleeve for
from preparing a budget to start-up.
your application.
ADVANTAGES FOR NEW
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
CONSTRUCTION
replaced.
Design Flexibility for the Architect/Engineer
• Use an existing sleeve and exterior grille. The
• Whisper--quiet performance, indoors and out
Gree E-TAC will fit into:
• No bulky duct system
— The following major competitors’ wall
• No separate equipment room
sleeves/grilles: Carrier, GE, Amana,
• No water towers or additional cooling
Trane, Friedrich and Bryant, and NO
equipment
accessory retrofit kit is required.
and Minimum
Wall Sleeve Opening
• No complex match--upFraming
of different
HVAC
— Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
• Less sensitivity to building orientation (sun,
extension (see accessory Friedrich
5/8" MIN.
5/8"
MIN.
wind, shade)
Retrofit
Wall Sleeve Adapter).
(15.9)
(15.9)
• Optional architectural grille to permit custom
exterior appearance
A07381
JACK STUDS
MAIN STUD
HEADER - 4” X 4” (101.6 X 101.6) OR
(2) 2” X 4” (50.8 X 101.6)
16 1/4”
(412.8)
42 1/8”
(1070.0)
JACK STUD
CRIPPLE
FLOOR
SUB-FLOOR
MEASUREMENTS IN ( ) = mm
A07382
Initial Cost Savings for the Building Owner
SIDE
• No expensive componentSIDEHVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery1/2"to
minimize on--site
(12.7) MINIMUM
1/2" (12.7) MINIMUM
damage
ARCHITECTURAL GRILLE
STAMPED OUTDOOR GRILLE
STANDARD MOUNT
Stampedwall
grille thickness
(9.4)goes in
• Weather--protected
sleeve0.75"
that
ALUMINUM OR PLASTIC
Architectural grille thickness 1.25" (32)
place during NOTE:
construction;
Dimensions in ( ) arechassis
in millimeters that slides
in place after construction
Wall for
Sleeve
Mounting (All Models)
• No seasonal changeover required
cooling
or heating -- units are self--contained comfort
systems
A07383A
22 25
4
GA
E-TAC
A07633
TYPICAL WALL INSTALLATION
A
5/8”
(15.9 mm)
Typical Wall Sleeve Installation
A07384
MINIMUM 3-1/4” (82.6 mm)
ABOVE FLOOR COVERING
IF SUBBASE IS USED
Typical Curtain Wall Installation (All Models)
NOTES:
1. Sleeve may be flush mounted to floor, but front
panel may have to be notched to accommodate
service cord.
2. If more than 4 in. (101.6 mm) of sleeve projects
into room, an accessory subbase must be used
for support.
3. For walls 2 in. (50.8 mm) thick or less, an
accessory subbase must be used for support.
4. Caulk around sleeve on both indoor and outdoor
sides.
A07385
23
26
W
re
an
ne
E-TAC
Important Sleeve Installation Considerations:
• All Gree sleeves are self pitching and must
be mounted level in all directions.
• The sleeve should be caulked on all sides,
including both inside and outside the
building.
• If more than 4 in. (101.6 mm) of wall sleeve
projects into the room, an accessory subbase
must be used for support.
• For all applications with an accessory
subbase, wall sleeve must extend 3--1/4 in.
(82.6 mm) minimum into room and must be
3--1/4 in. (82.6 mm) minimum to 5--1/2 in.
(139.7 mm) maximum above floor (including
carpeting) to allow for proper fit of subbase.
• For applications where the wall sleeve is
mounted flush to the exterior of the
building (or recessed in), Gree recommends
a field--supplied drip edge be installed to
prevent water infiltration into the building.
• Insulated wall sleeves should be considered
for superior sound absorption, to reduce heat
loss and to prevent sleeve sweating, a
condition that can occur when the outside
temperature is cold and the indoor conditions
are warm and humid.
N
T
(E
ar
in
in
fr
A
C
D
In
DIMENSIONAL
APPLICATIONSDRAWINGS AND INSTALLATION -Lower Operating Costs and Reliable Comfort
NEW
Whether CONSTRUCTION
you are designing a new (CONT.)
structure or
for The Occupant
replacing packaged terminal air conditioning units in
Heat pump models
offer substantial
savings
MINIMUM
CLEARANCE
INDOOR
AND• OUTDOOR
DISCHARGE
AIR
an existing building,
Gree E-TAC FOR
will meet
your
over
models
with
conventional
electric
needs.
resistance heaters
• Hotels and motels
• Individual units allow tenants to choose the
• Nursing homes and assisted living care
degree of comfort and operating economy.
centers
! servicing reduces downtime: complete
• Rapid
• Offices
chassis can be replaced in minutes without
EQUIPMENT OPERATION HAZARD
• Apartments
disrupting other occupants.
Failure to follow this caution may result in equipment
• Single--family dwellings
•
unit operation.
operates independently of other
damage Each
or improper
• Home conversions and residential add--ons
units
in
the
building.
Noairdependency
Blocking indoor or outdoor
discharge
could cause by
15” (381.0 mm) MINIMUM DISTANCE FROM
premature
failure
of
unit.
building on central HVAC system.
FRONT PANEL TO OBJECTS IN ROOM
NEW CONSTRUCTION
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
36" (914.4 mm) MINIMUM DISTANCE FROM
in all applicable aspects of
the TO
construction
project,
SLEEVE
BUILDING WALLS,
SHRUBS, etc.
from preparing a budget to start-up.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
ADVANTAGES FOR NEW
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
CONSTRUCTION
Indoor and Outdoor Discharge Air
replaced.
Circulation
Design Flexibility for the Architect/Engineer
• Use an existing sleeve and exterior grille. The
• Whisper--quiet performance, indoors and out
Gree E-TAC will fit into:
• No bulky duct system
— The following major competitors’ wall
• No separate equipment room
sleeves/grilles: Carrier, GE, Amana,
• No water towers or additional cooling OUTDOOR VIEW Trane, Friedrich and Bryant, and NO
equipment
accessory retrofit kit is required.
• No complex match--up of different HVAC
— Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
• Less sensitivity to building orientation (sun,
extension (see accessory Friedrich
wind, shade)
GRILLE
Retrofit Wall Sleeve Adapter).
MOUNTING
HOLES
• Optional
architectural grille to permit custom
exterior appearance
A07386
Initial Cost Savings for the Building Owner WALL SLEEVE
• No expensive
component HVAC system
2 3/8”
(60.3)
purchase
SLEEVE-(2)
• No equipmentWALL
room
or maintenance
DRAIN
LOCATIONS
CONDENSATE
OVERFLOW
engineering staff
HOLES
• Two--part delivery to minimize on--site
2 3/8”
(60.3)
damage
(OUTSIDE)
• Weather--protected wall sleeve that goes in
Back
Polymer Wall Sleeve
place during construction; chassis
thatofslides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
24 27
4
GRILLE
MOUNTING
HOLES
A07387
GA
E-TAC
CAUTION
DIMENSIONAL DRAWINGS AND INSTALLATION DATA -NEW CONSTRUCTION (CONT.)
A
W
re
an
ne
TYPICAL SUBBASE INSTALLATION
0’-3 1/4” MIN. (83)
0’-5 1/2” MAX. (140)
E-TAC
GA
0’-0 7/8”
(22)
SUBBASE ACCESS
OUTSIDE
WALL
SEE
NOTES
SIDE
N
T
(E
ar
in
in
fr
A
C
D
SUBBASE LEVELING BOLTS
ACCESSORY DRAIN
(EXTERNAL OR INTERNAL)
NOTES:
1. Accessory subbase is required for applications where:
- Wall sleeve extends 4 inches (101.6 mm) or more into the room.
- Wall thickness is less than 2 inches (50.8 mm).
- All 265-v cord-connected applications.
2. For all applications with an accessory subbase:
- Wall sleeve must extend 4 in. (101.6 mm) into the room and 3-1/4 in. (82.6 mm)minimum above the floor
- Subbase height is adjustable from 3-1/4 in. (82.6 mm) to 5-1/2 in. (139.7 mm) maximum above floor (including carpeting).
Refer to wall sleeve installation instructions.
In
A07389
25
28
WALL
APPLICATIONS
THERMOSTAT CONNECTIONS
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
Energy
Management
(24VAC in)
•
•
•
•
•
•
R
Hotels and motels
W
Nursing homes and assisted living care
Y
centers
O
Offices
GH
Apartments
GL
Single--family dwellings
Home conversions and residentialCadd--ons
See Note 1
See Note 2
NOTES:
1. Use terminal "O" for heat pump connection only.
2. Terminal "C" (common) is typically only required for digital thermostats.
E-TAC
Common
R W Y O Gh Gl C
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
Terminal Connector Removal and Replacement
A07073
TERMINAL BLOCK
NEW CONSTRUCTION
•
A07059
Box Wire
Terminal
The GreeControl
E-TAC Packaged
Terminal
Air for
Conditioning
Thermostat
Models
(E-TAC) unitWall
is designed
to meet
the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
ADVANTAGES FOR NEW
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
CONSTRUCTION
replaced.
Design Flexibility for the Architect/Engineer
• Use an existing sleeve and exterior grille. The
• Whisper--quiet performance, indoors and out
Gree E-TAC will fit into:
• No bulky duct system
— The following major competitors’ wall
• No separate equipment room
sleeves/grilles: Carrier, GE, Amana,
• No water towers or additional cooling
Trane, Friedrich and Bryant, and NO
equipment
accessory retrofit kit is required.
• No complex match--up of different HVAC
— Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
Energy Management
• Less sensitivity to building orientation Terminal
(sun,Connections Wall Thermostat
extension (see accessory Friedrich
Terminal Connections
wind, shade)
Retrofit Wall Sleeve Adapter).
• Optional architectural grille to permit custom
Terminal Connections
exterior appearance
A07634
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systemsTHERMOSTAT WIRE ROUTING
NOTE: Thermostat wire is field supplied. Recommended wire gage is 18
to 20 gage solid thermostat wire. Thermostat wire should always be routed
around or under, NEVER through, the wall sleeve. The wire should then
be routed behind the front panel to the easily accessible terminal
connector.
(UNDER SLEEVE, BEHIND FRONT PANEL)
Terminal Wire Routing
A07074
26 29
4
GA
TYPICAL WALL THERMOSTAT
Lower Operating Costs and Reliable Comfort
for The Occupant
PERFORMANCE AND ELECTRICAL DATA
A
W
re
an
ne
208/230V HEAT/COOL MODEL
MODEL NUMBER
E-TAC-
MODEL
07HC230V20A-A
NUMBER
09HC230V20A-A
TAC12HC230V20A-A
12HC230V30A-A
GBE073B-D
15HC230V20A-A
GBE093B-D
15HC230V30A-A
Cooling
E-
7,600/7,700
8,800/9,000
Cooling
11,800/12,000
11,800/12,000
7,600/7,700
14,600/15,000
8,800/9,000
14,600/15,000
Heating
CAPACITY*
Rev. Cyc. (Btuh)
Electric
HEATER KW
N/A
8,300/10,200
Heating
N/A
8,300/10,200
Rev.
Electric
N/A Cyc.
8,300/10,200
N/AN/A
13,900/17,000
8,300/10,200
N/A
8,300/10,200
8,300/10,200
N/AN/A
13,900/17,000
GBE123B-D
11,800/12,000
N/A
GBE125B-D
11,800/12,000
N/A
INDOOR
13,9FAN
00/17,000
GBE155B-D
14,600/15,000
N/A
13,900/17,000
MODEL NUMBER
E-TAC-
POWER FACTOR
(%)
07HC230V20A-A
09HC230V20A-A
12HC230V20A-A
12HC230V30A-A
15HC230V20A-A
MODEL
15HC230V30A-A
GA
MODEL E-TAC GBE SERIES
CAPACITY* (Btuh)
97%
99%
99%
99%
98%
POWER
98%
NUMBER PTAC- FACTOR (%)
Full Load Amps
0.024
0.028
0.031
0.031
0.031
Horsepower
0.031
0.1
0.2
0.2
Full
0.2 Load
Amps
0.2
*Rated in accordance with ARI Standard 380-93.
97%
0.024
GBE073B-D
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature.
**Electric
resistance heater power99%
and fan motor power.0.028
GBE093B-D
GBE123B-D
99%
0.031
2.452/3.0
10.5/10.7
NA
4.087/5.0
10.5/10.7
NA
0.031
0.2
GBE155B-D
0.031
A
0.2
(Amps)
290/310
AMP.
B
A
20
290/310
30
320/340
30
B
B
B
C
B RECEPC TACLE
16.5
C
B
WATTS
Heating
Cooling
12.2/13.2
620/640
2,496/3,036
12.2/13.2
770/800
2,496/3,036
Heating**1,120/1,120
Cooling2,496/3,036
Heating
12.2/13.2
20.5/21.5
12.2/13.2 1,120/1,120
620/640 4,118/5,037
2,496/3,036
12.2/13.2
1,510/1,530
2,496/3,036
12.2/13.2 1,510/1,530
770/800 4,118/5,037
2,496/3,036
20.5/21.5
5.3/5.1
12.2/13.2
1,120/1,120
2,496/3,036
5.3/5.1
20.5/21.5
1,120/1,120
4,118/5,037
TYPE
18
21.5
26.8
26.8
38.09 R-410A
CHARGE
38.09
B
27.2
C
27.2
C
(oz)
18
D
C
*RateRECEPTACLE
d in accordance with ARI Standard 380-93.
1.7
2.1
2.7
2.7
DEHUMIDIFI3.5
3.5 CACTION
(Pints/Hr)
1.7
84%
81%
67%
67%
SENSIBLE
65%
65% HEAT
FACTOR
84%
126
APPROX.
128
CHASSIS
132
SHIP WT.
132 (lbs)
141
141
126
21.5
2.1
81%
128
26.8
2.7
67%
132
26.8
2.7
67%
132
38.09
3.5
E
65%
F 141
D
E
F
LEGEND
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature.
NEMA CONFIGURATION
6-15R
**ElecNEMA
tric resiCONFIGURATION
stanceAMPS
heater power and fan mo15
tor pow6-15R
er.
15
RATED VOLTSAMPS
250
250
TIME-DELAY TYPERATED
FUSE VOLTS
15
TIME-DELAY TYPE FUSE
(or HACR
Circuit Breaker)
16.5
16.5
16.5
27.2
16.5 MIN.
CIRCUIT
27.2
LEGEND
20
16.5
B
EER — Energy Efficiency Ratio
of performance
280/300COP — Coefficient
20
16.5
B
CFM — Cubic feet per minute
0.2
99%
20
20
20
30
MAX
30 FUSE
30 SIZE
280/300
0.2
98%
AMPS
Heating**
Cooling
NA
3.0/2.8
VOLTAGE3.9/3.7
NA
RANGE 5.3/5.1Cooling
NA COP†
187-253
NA NA
5.3/5.1 3.0/2.8
NA
7.5/6.7
N
A
NA
7.5/6.7 3.9/3.7
187-253
WATTS
NA
7.5/6.7
20.5/21.5
1,510/1,530 4,118/5,037
4.087/5.0
9.8/9.7
187-253
CFM
HI
DEHUMIDIFIAPPROX.
Speed
RECEPCACTION
MAX FUSE MIN. CIRCUIT
R-410A
SENSIBLE
CHASSIS SHIP
SIZE (Amps)
AMP.
TACLE TYPE CHARGE (oz)
(Pints/Hr)
HEAT FACTOR
WT. (lbs)
0.1
GBE125B-D
RECEPTACLE
12.2/12.2
11.4/11.3
EER
10.5/10.7
10.5/10.7
12.2/12.2
9.8/9.7
11.4/11.3
9.8/9.7
280/300
280/300
290/310
290/310
CFM HI
320/340
Speed
320/340
INDOOR
0.2 FAN
COP†
2.4/3.0
HEATER
2.4/3.0
KW
2.4/3.0
4.1/5.0
2.452/3.0
2.4/3.0
2.452/3.0
4.1/5.0
8,300/10,200
Horsepower
EER
AMPS
VOLTAGE
RANGE
E-TAC
HEAT/COOL MODELS
15
6-20R
20
250
20
EER — Energy Efficiency Ratio
6-30R
Coefficient of 6-30R
performance
6-20R COP —30
20 CFM —
30
250
Cubic feet per minute
250
250
30
20
30
7-15R
15
277
15
7-15R
15
277
15
7-20R
20
277
20
7-20R
20
277
20
7-30R
30
277
30
7-30R
30
277
30
N
T
(E
ar
in
in
fr
A
C
D
(or HACR Circuit Breaker)
In
27
30
PERFORMANCE
APPLICATIONS AND ELECTRICAL DATA (CONT.)
GA
E-TAC
Lower Operating Costs and Reliable Comfort
Whether you are designing a new structure or
for
The Occupant
265
V units
HEAT/COOL
MODELS
SERIES
replacing packaged terminal air conditioning
in GBE
MODEL
E-TAC
GBA
SERIES
HEAT/COOL
• Heat pump models
offer substantial
savings
HEAT
PUMP MODELS
an
existing
building, Gree
E-TAC
CAPACITY*
(Btuh) will meet your
AMPS
WATTS
CAPACITY* (Btuh)
(Btuh)
AMPS
WATTSelectric
CAPACITY*
AMPS
WATTS
Heating
over
models
with
conventional
MODEL
NUMBER
HEATER
VOLTAGE
needs.
MODEL
MODEL
ETACCooling
KW
EER
COP†
RANGE
Cooling
Heating**
Cooling
Heating
Rev. Cyc.
Heating Electric
Heating
NUMBER EEVOLTAGE
HEATER
resistance
heaters
VOLTAGE
NUMBER
HEATER
7,200
10,200
3.0
11.0
2.6
11.32
655
3,036
07HC265V20A-A
N/A
NA
Rev.
Cyc.
Electric
•TACand
motels
TAC- Hotels
C
o
o
l
i
n
g
E
E
R
C
O
P
†
RANGE
KW
Cooling
Heating**
Cooling
Heating
Rev. Cyc.
Electric
COP†
RANGE
Cooling
Heating**
Cooling
Heating
Cooling
KW
EER
9,000
10,200
3.0
11.3
3.2
11.32tenants800
3,036 the
09HC265V20A-A
N/A
NA •
Individual
units
allow
to
choose
6/56540
GBE073B-P
7,6070,2/70,0700
//6A,300
8,30100/,1200,0200
2.4532.0/3.0
12.121/1.02.2
3.4N/3A.4
3.02/.26.8
121.21/.1332.2
620
2,4936,0/33,6036
GBA073B-D
• Nursing
homes6,100Nand
assisted
12,000
10,200 living
3.0 care
10.7
4.6
11.32
1,120
3,036
12HC265V20A-A
N/A
NA
239-292
degree
of
comfort
and
operating
economy.
/8A,100
100/,1200,0200
NA
1.21/.1332.2
36,0/33,6036
GBE093B-P
8,8090,0/9012,000
,0 00
7,900N/N/A
8,30
2.45.0
532.0/3.0
11.141/1.31.3
34.6
.93/.32.7
12
71,120
708/08000
2,495,037
GBA093B-D
17,000
10.7
18.87
12HC265V30A-A
NA3.3/3.3
centers
187-253
GBE123B-P
/1A0,700
100/,1200,0200
1.21/.1332.2 downtime:
36,0/33,6036
GBA123B-D
11,81020,/010
20,000
10,500N/N/A
8,30
2.43.0
532.0/3.0
19.8
0.150/1.70.7
54.6
.34/.56.1
1211.32
1,11,120
210,1/12,0120 complete
2,493,036
15,000
10,200
239-292servicing
reduces
15HC265V20A-A
NA3.1N•/3A.1 Rapid
• Offices
15,000
18.87
15HC265V30A-A
NA3.1N/3A.1
GBE125B-P
/1A0,700
1070,/01070,000
1.58/.2817.5
58,0/53,7037
GBA125B-D
11,81020,/010
20,000
10,500N/N/A
13,917,000
4.05.0
857.0/5.0
19.8
0.150/1.70.7
.34/.be
56.1 replaced
20
,11,530
210,1/12,0120 4,1without
15,037
chassis can55.9
in 1minutes
GBE155B-P
15,000
N/A
17,000
55.0
9.8
NA
5.9
121.5
8.87
1,530
5,037
GBA155B-D
• Apartments
15000
13,800
17,000
9.8
2.9
6.7
1,530
5,037
207-253
disrupting other occupants.
• Single--family dwellings
• Each unit operates independently of
other
APPROX.
APPROX.
INDOORFAN
FAN add--ons MAX
INDOOR
FAN
INDOOR
• Home conversions and residential
CHASSIS
units in the building. No dependency
APPROX.by
CHASSIS
SHIP WT.
WT.
POWER
MIN.
RECEPR-410A
DEHUMIDIFI- SENSIBLE SHIP
CHASSIS
FUSE
Full Load
CFM HI
building
on
centralCACTION
HVAC system.
CIRCUIT
TACLE
CHARGE
HEAT
SHIP
WT.
SIZE
FACTOR Horsepower
MODEL NUMBER
(lbs)
(lbs)
ETAC(%)
NEW
CONSTRUCTION
97%
0.028
0.1
07HC265V20A-A
POWER
MODEL
MODEL
POWER
NUMBER PTACPTAC- FACTOR
FACTOR (%)
(%)
NUMBER
Horsepower
Horsepower
Full
Load
Amps
Full
Load
Amps
Amps
CFM HI
HI
Speed
CFM
Speed
Speed
300
300
280/300
280/300
310
280/300
280/300
310
290/310
320
290/310
320
290/310
290/310
MAX FUSE
FUSE
MIN.
RECEPMAX
RECEP(Amps)
AMPMIN.
TYPE
SIZE
CIRCUIT
TACLE
SIZE
CIRCUIT
TACLE
20
E TYPE
(Amps) 16.5AMP.
AMP.
(Amps)
TYPE
20
16.5
E
20
16.5
C
2020
16.516.5
E B
20
16.5
3020
27.216.5
F BC
2020
16.516.5
20
16.5
E BC
3030
27.227.2
F CD
30
27.2
R-410A
R-410A
(oz)
CHARGE
CHARGE
19.75
(oz)
(oz)
DEHUMIDIFIDEHUMIDIFI(Pints/Hr)
CACTION
CACTION
1.7
(Pints/Hr)
(Pints/Hr)
SENSIBLE
SENSIBLE
FACTOR
HEAT
HEAT
84%
FACTOR
FACTOR
(lbs)
124
126
124
126
132
126
131
132
141
132
135
141
132
135
RETROFIT/REPLACEMENT
99%
0.028
0.2
19.40
2.1
81%
09HC265V20A-A
The
Gree E-TAC
Terminal Air
97%Packaged
0.028
0.1 Conditioning
19.75
1.7
84%
GBE073B-P
0.028
0.1
20.46
1.7
84%
GBA073B-D
0.031
0.2
25.04
2.7
67%
12HC265V20A-A 97% 99%
If you are replacing
a unit in 2.7
an existing
99%designed
0.028
0.2
19.40
2.1
81% wall sleeve,
GBE093B-P
(E-TAC)
unit is
to meet the
99%
0.028
0.2
25
2.1
81%
GBA093B-D
99%
0.031
0.2 needs of the
25.04
67%
12HC265V30A-A
your options include:
GBE123B-P
0.031contractor.
0.2
40.21
3.5
65%
99% 98%
0.031
0.2
25.04
2.7
67%
15HC265V20A-A
GBA123B-D
99%
0.031
0.2
26.8
2.7
67%
architect,
engineer,
and
For unit
0.031
0.2
40.21
3.5
65%
15HC265V30A-A 99%
GBE125B-P
99% 98%
0.031
0.2
25.04
2.7
67%
GBA125B-D
0.031
0.2
26.8
2.7
67%
• Replace the existing wall sleeve with the
installation, Gree’s expert support network will assist
98%
0.031
0.2
320/340
27.2
D
40.21
3.5
65%
141
98%
0.2
320/340
27.2
C
38.09
3.5
65%
144
GBE155B-P
GBA155B-D
the polymer
wall sleeve.
See accessory
sleeve
in
all applicable
aspects 0.031
of
the construction
project, 3030
*Rated in accordance with ARI Standard 380-93.
LEGEND
section
for
selecting
the
correct
sleeve
for
from
preparing
a
budget
to
start-up.
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature. EER — Energy Efficiency Ratio
Raatteedd iinn aaccccoorrddaannccee w
wiitthh AAR
RII SSttaannddaarrdd 338800--9933..
GEEN
ND
D
**R
LLEEG
**Electric resistance heater power and fan motor power.
COP — Coefficient of performance
your application.
Cooeeffffiicciieenntt ooff PPeerrffoorrm
maannccee ((C
CO
OPP)) aatt 4477 FF oouuttddoooorr aam
mbbiieenntt tteem
mppeerraattuurree..
R—
—
neerrggyy EEfffeet
Raminute
attiioo
††C
EEEER
ffiicciieennper
ccyy R
CFM
—EEnCubic
ADVANTAGES
FORmoottoNEW
NOTE: in most cases, when replacing the
weerr aanndd ffaann m
orr ppoow
weerr..
CO
OPP —
—C
Cooeeffffiicciieenntt ooff ppeerrffoorrm
maannccee
****EElleeccttrriicc rreessiissttaannccee hheeaatteerr ppoow
C
wall sleeve, the exterior grille must also be
CONSTRUCTION
CFM —
— Cubic
Cubic feet
feet per
per minute
minute
CFM
E
F
A
B
C
D
replaced.
A
B
C
D
E
Design Flexibility for the Architect/Engineer
RECEPTACLE
• Use an existing sleeve and exterior grille. The
• RECEPTACLE
Whisper--quiet performance, indoors and out
Gree E-TAC will fit into:
• CONFIGURATION
No bulky duct system
NEMA
6-15R
6-20R
6-30R
7-15R
7-20R
7-30R
major competitors’
wall
— The following
20
30
AMPS
15
20
30
15
NEMA
CONFIGURATION
6-15R
6-20R
6-30R
7-15R
7-20R
• No
separate
equipment
room
277
277
RATED VOLTS
250
250
250
277
sleeves/grilles:
AMPS
15
20
30
15 Carrier, GE, Amana,
20
TIME-DELAY
FUSE
30
15
20
30
• NoTYPE
water
towers 15or250additional20 cooling
RATED
VOLTS
250
250
277 and Bryant, and
277 NO
Trane, Friedrich
(or HACR Circuit
Breaker)
equipment
TIME-DELAY
TYPE FUSE
15
20
30
15
accessory retrofit
kit is required. 20
(or HACR Circuit Breaker)
• No complex match--up of different HVAC
— Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
• Less sensitivity to building orientation (sun,
extension (see accessory Friedrich
wind, shade)
Retrofit Wall Sleeve Adapter).
• Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
28
4
32
F
7-30R
30
277
30
PERFORMANCE AND ELECTRICAL DATA
A
W
re
an
ne
208/230V HEAT PUMP MODELS
MODEL NUMBERETAC-
MODEL
Heating
CAPACITY*
Rev. Cyc. (Btuh)
Electric
HEATER KW
COP†
EER
07HP230V20A-A
NUMBER E09HP230V20A-A
TAC12HP230V20A-A
GBE073B-D
12HP230V30A-A
7,600/7,700
8,800/9,000
Cooling
11,800/12,000
7,600/7,700
11,800/12,000
6,100/6,300 Heating
8,300/10,200
7,900/8,100
8,300/10,200
Rev. Cyc.
Electric
10,500/10,700
8,300/10,200
N/A
8,300/10,200
10,500/10,700
13,900/17,000
2.4/3.0
HEATER
2.4/3.0
KW
2.4/3.0
2.452/3.0
4.1/5.0
12.2/12.2
11.4/11.3
EER
10.5/10.7
12.2/12.2
10.5/10.7
15HP230V20A-A
GBE093B-D
15HP230V30A-A
GBE123B-D
14800/15000
8,800/9,000
14800/15000
11,800/12,000
13600/13800
N/A
13600/13800
N/A
2.4/3.0
2.452/3.0
4.1/5.0
2.452/3.0
9.7/9.8
11.4/11.3
9.7/9.8
10.5/10.7
10.5/10.7
NA
9.8/9.7
NA
8,300/10,200
8,300/10,200
13,900/17,000
8,300/10,200
GBE125B-D
11,800/12,000
N/A
13,9FAN
00/17,000
INDOOR
4.087/5.0
GBE155B-D
14,600/15,000
N/A
13,900/17,000
4.087/5.0
CFM HI
Speed
MODEL NUMBER
ETAC-
GA
Cooling
MODEL E-TAC GBE SERIES
CAPACITY* (Btuh)
POWER FACTOR
(%)
07HP230V20A-A
97%
09HP230V20A-A
99%
12HP230V20A-A
99%
12HP230V30A-A
99%
15HP230V20A-A
98%
POWER
MODEL
15HP230V30A-A
98%
NUMBER PTAC- FACTOR
(%)
Horsepower
Full Load Amps
0.028
0.1 FAN
INDOOR
0.028
0.2
0.031
0.2
Full
0.031
0.2 Load
Horsepower
0.031
0.2
Amps
0.031
0.2
97% 380-93.
0.024
0.1
GBE073B-D
*Rated
in accordance with ARI Standard
†Coefficient
of Performance (COP)
ambient temperature. 0.2
99% at 47 F outdoor0.028
GBE093B-D
**Electric resistance heater power and fan motor power.
GBE123B-D
99%
0.031
0.2
AMPS
VOLTAGE
RANGE
3.4/3.4
3.3/3.3
COP†
3.1/3.1
NA
3.1/3.1
Cooling
3.0/2.8
VOLTAGE
3.9/3.7
RANGE 5.3/5.1
Cooling
187-253
3.0/2.8
5.3/5.1
2.9/2.9
NA
2.9/2.9
NA
187-253
187-253
20
20
20
30 FUSE
MAX
20
SIZE
30
(Amps)
16.5
16.5
16.5
27.2
MIN.
16.5
CIRCUIT
27.2
AMP.
280/300
20
16.5
B
B
B
RECEPC
B
TACLE
CTYPE
LEGENDB
Efficiency
Ratio
280/300 EER — Energy
20
16.5
COP — Coefficient of performance
290/310
20
16.5
CFM — Cubic feet per minute
AMPS
Heating**
Cooling WATTS
Heating
12.2/13.2
12.2/13.2
Heating**
12.2/13.2
12.2/13.2
20.5/21.5
620/640
770/800
Cooling
1,120/1,120
620/640
1,120/1,120
2,496/3,036
2,496/3,036
Heating
2,496/3,036
2,496/3,036
4,118/5,037
6.9/6.7
3.9/3.7
6.9/6.7
5.3/5.1
12.2/13.2
12.2/13.2
20.5/21.5
12.2/13.2
1,510/1,530
770/800
1,510/1,530
1,120/1,120
2,496/3,036
2,496/3,036
4,118/5,037
2,496/3,036
5.3/5.1
20.5/21.5
1,120/1,120
7.5/6.7
20.5/21.5
DEHUMIDIFICACTION
(Pints/Hr)
R-410A
MAX FUSE MIN. CIRCUIT
RECEPSIZE (Amps)
AMP.
TACLE TYPE CHARGE (oz)
280/300
280/300
290/310
CFM HI
290/310
320/340
Speed
320/340
WATTS
4,118/5,037
APPROX.
1,510/1,530 CHASSIS
4,118/5,037
SHIP
SENSIBLE
HEAT FACTOR
20.46
25
26.8
26.8
R-410A
38.09
CHARGE
38.09
(oz)
1.7
2.1
2.7
2.7
DEHUMIDIFI3.5
CACTION
3.5
(Pints/Hr)
84%
81%
67%
67%
SENSIBLE
65%
HEAT
65%
FACTOR
18
1.7
84%
WT. (lbs)
APPROX.
126
CHASSIS
131
SHIP WT.
135
(lbs)
135
144
144
126
B
21.5
2.1
81%
128
B
26.8
2.7
67%
132
GBE125B-D
99%
0.031
0.2
290/310
30
27.2
C
26.8
2.7
67%
132
GBE155B-D
98%
0.031
0.2
320/340
30
27.2
C
38.09
3.5
65%
141
A
B
C
RECEPTACLE
*Rated in accordance with ARI Standard 380-93.
E
F
LEGEND
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature.
NEMA
6-15R
**EleCONFIGURATION
ctric resistance heater power and fan m
otor power.
AMPS
15
RATED VOLTS
250
TIME-DELAY TYPE FUSE
15
D
EER — Energy Efficiency Ratio
6-20R
20
250
20
COP6-30R
— Coefficient of performance
30
250
30
CFM — Cubic feet per minute
7-15R
15
277
15
7-20R
20
277
20
7-30R
30
277
30
E-TAC
HEAT/COOL MODELS
N
T
(E
ar
in
in
fr
A
C
D
(or HACR Circuit Breaker)
In
29
30
PERFORMANCE
APPLICATIONS AND ELECTRICAL DATA (CONT.)
GA
E-TAC
Lower Operating Costs and Reliable Comfort
Whether you are designing a new structure or
for
The Occupant
265V HEAT
MODELS
replacing packaged terminal air conditioning
units
inPUMP
MODEL
E-TAC
GBA
SERIES
• Heat pump models
offer substantial
HEAT
PUMP MODELS
an
existing
building, Gree
E-TAC
WATTS savings
AMPS
CAPACITY*
(Btuh) will meet your
CAPACITY* (Btuh)
AMPS
WATTS electric
MODEL NUMBER
Heating
HEATER
VOLTAGE
over
models
with
conventional
needs.
MODEL
ETACCooling
KW
EER
COP†
RANGE
Cooling
Heating**
Cooling
Heating
Rev. Cyc.
Heating Electric
resistance
heaters 11.32
VOLTAGE 2.6
NUMBER
EHEATER
07HP265V20A-A
7,200
6,100
10,200
3.0
11.0
3.3
655
3,036
•
Hotels
and
motels
Rev. Cyc.
Electric
COP†
RANGE
Cooling
Heating**
Cooling
Heating
TACCooling
KW
EER
09HP265V20A-A
9,300
8,100
10,200
3.0
11.3
3.3 •
3.4units allow
11.32 tenants
825to choose
3,036 the
Individual
7,600/7,700
/6,300
8,300/10,200
2.452/3.0
12.2/12.2
3.0/2.8
12.2/13.2
620/640
2,496/3,036
GBA073B-D
12HP265V20A-A
12,000
10,200 living
3.0 care
10.7
3.13.4/3.4
4.6
11.32
1,120
3,036
• Nursing
homes6,10010,700
and
assisted
239-292
degree
of
comfort
and
operating
economy.
8,800/9,012,000
00
7,90010,700
/8,100
8,3017,000
0/10,200
2.45.0
52/3.0
11.4/11.3
3.9/3.7
12.2/13.2
770/800
2,45,037
96/3,036
GBA093B-D
12HP265V30A-A
10.7
3.13.3/3.3
4.6
18.87
1,120
centers
187-253
15HP265V20A-A
2.93.1•/3.1 Rapid servicing
5.9
11.32
GBA123B-D
11,800/1215,000
,000
10,50013,800
/10,700
8,3010,200
0/10,200
2.43.0
52/3.0
19.8
0.5/10.7
5.3/5.1
12.2/13.2 downtime:
11,530
,120/1,120 complete
2,43,036
96/3,036
reduces
• Offices
15HP265V30A-A
2.93.1/3.1
5.9
18.87
5,037
GBA125B-D
11,800/1215,000
,000
10,50013,800
/10,700
13,917,000
00/17,000
4.05.0
87/5.0
19.8
0.5/10.7
5.3/be
5.1 replaced
20.5/21.5 in 11,530
,120/1,120 4,1without
18/5,037
chassis can
minutes
GBA155B-D
• Apartments
15000
13,800
17,000
5
9.8
2.9
6.7
21.5
1,530
5,037
207-253
disrupting other occupants.
• Single--family dwellings
• Each unit operates independently of other
APPROX.
INDOORFAN
FAN add--ons MAX
INDOOR
APPROX.
• Home conversions and residential
units in the building. No dependency
CHASSIS by
RECEPMIN.
CHASSIS
R-410A
DEHUMIDIFISENSIBLE
FUSE
POWER
SHIP WT.
Full Load
CFM HI
buildingCHARGE
on central
HVAC system.
TACLE
CIRCUIT
SHIP
WT.
MODEL NUMBER
CACTION
HEAT
SIZE
FACTOR Horsepower
(lbs)
ETAC(%)
NEW
CONSTRUCTION
07HP265V20A-A
97%
0.028
0.1
MODEL
POWER
NUMBER PTAC- FACTOR (%)
09HP265V20A-A
99%
Horsepower
0.028
Amps
Full
Load
Amps
0.2
Speed
CFM HI
Speed
300
300
280/300
310
310
280/300
320
290/310
320
MAX FUSE
(Amps)
SIZE
20
(Amps)
20
2020
3020
2020
30
MIN.
RECEPTYPE
AMP
CIRCUIT
TACLE
16.5
E
AMP.
TYPE
E
16.5
E B
16.516.5
F B
27.216.5
E B
16.516.5
F
27.2
R-410A (Pints/Hr)
DEHUMIDIFI- FACTOR
SENSIBLE
(oz)
CHARGE
CACTION
HEAT
21.16
1.7
84%
(oz)
(Pints/Hr)
FACTOR
23.63
2.1
81%
20.46
84%
27.16
2.71.7
67%
27.1625
2.72.1
67%
81%
39.50
3.52.7
65%
26.8
67%
39.50
3.5
65%
(lbs)
126
131
126
135
135
131
144
135
144
RETROFIT/REPLACEMENT
The
Gree E-TAC Packaged0.028
Terminal Air
Conditioning
0.1
GBA073B-D
12HP265V20A-A 97% 99%
0.031
0.2
If you are replacing a unit in an existing wall sleeve,
(E-TAC)
unit
is
designed
to
meet
the
12HP265V30A-A 99% 99%
0.031
0.2 needs of the
0.028
0.2
GBA093B-D
15HP265V30A-A
98%
0.031
0.2
your options include:
GBA123B-D
99%
0.031 contractor.
0.2
architect, engineer,
and
For unit
15HP265V30A-A
98%
0.031
0.2
GBA125B-D
99%
0.031
0.2
290/310
30
27.2
C
67%
135 the
• Replace
the26.8existing2.7 wall sleeve
with
installation, Gree’s expert support network will assist
98%
0.031
0.2
320/340
30
27.2
C
38.09
3.5
65%
144
GBA155B-D
the polymer wall sleeve. See accessory sleeve
in
all applicable aspects of the construction project,
*Rated in accordance with ARI Standard 380-93.
LEGEND
for
from
preparing
a
budget
to
start-up.
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature.
EER — Energy Efficiency Ratio section for selecting the correct sleeve
*R
ated in aresistance
ccordance heater
with AR
I Stanand
dardfan
380
-93. power.
EG
END
**Electric
power
motor
COP — CoefficientLof
performance
your
application.
CFM
minute
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature.
EER——Cubic
Enerfeet
gy Eper
f f icie
ncy Ratio
ADVANTAGES
FOR NEW
NOTE: in most cases, when replacing the
**Electric resistance heater power and fan motor power.
COP — Coefficient of performance
wall sleeve, the exterior grille must also be
CONSTRUCTION
CFM — Cubic feet per minute
replaced.
E
F
A
B
C
D
Design Flexibility for the Architect/Engineer
• Use an existing sleeve and exterior grille. The
• RECEPTACLE
Whisper--quiet performance, indoors and out
Gree E-TAC will fit into:
• No bulky duct system
NEMA CONFIGURATION
6-15R
6-20R
6-30R
7-30R
following major7-20R
competitors’ wall
— The7-15R
• No separate
20
30
AMPS equipment
15 room
20
30
15
sleeves/grilles:
Carrier,
GE, Amana,
277
277
RATED VOLTS
250
250
250
277
•
No
water
towers
or
additional
cooling
TIME-DELAY TYPE FUSE
15
20
30
15 Friedrich and20Bryant, and 30
Trane,
NO
(or HACR equipment
Circuit Breaker)
accessory retrofit kit is required.
• No complex match--up of different HVAC
— Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
• Less sensitivity to building orientation (sun,
extension (see accessory Friedrich
wind, shade)
Retrofit Wall Sleeve Adapter).
• Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
30
4
32
A
W
re
an
ne
EXPANDED RATING DATA
COOLING PERFORMANCE - HEAT/COOL MODELS
TEMP (DEG F) AIR
ENT COND (40%RH)
BtuH
Kw
75
Amps
SHR
BtuH
Kw
85
Amps
SHR
BtuH
Kw
95
Amps
SHR
BtuH
Kw
105
Amps
SHR
BtuH
Kw
110
Amps
SHR
Temp EVAP AIR-EWB (DEG F)
62
67
72
8062
8709
9055
536
531
522
2.4
2.3
2.3
0.96
0.72
0.53
7500
8131
8624
582
575
569
2.5
2.5
2.5
0.98
0.74
0.54
6815
7700
8285
640
640
640
2.8
2.8
2.8
0.99
0.77
0.54
6075
6892
7762
693
691
692
3.0
3.0
3.0
0.99
0.81
0.55
5251
5944
6907
758
755
755
3.3
3.3
3.3
0.99
0.87
0.58
ALL 12,000 NORMINAL BTUH MODELS
Evaporator entering air temp (D.B.) = 80 deg F
TEMP (DEG F) AIR
ENT COND (40%RH)
BtuH
Kw
75
Amps
SHR
BtuH
Kw
85
Amps
SHR
BtuH
Kw
95
Amps
SHR
BtuH
Kw
105
Amps
SHR
BtuH
Kw
110
Amps
SHR
Temp EVAP AIR-EWB (DEG F)
62
67
72
12564
13572
14112
939
928
914
4.3
4.2
4.2
0.89
0.66
0.49
11688
12672
13440
1018
1006
996
4.6
4.6
4.5
0.91
0.69
0.5
10620
12000
12912
1120
1120
1120
5.1
5.1
5.1
0.91
0.71
0.5
9468
10740
12096
1213
1210
1211
5.5
5.5
5.5
0.92
0.75
0.51
8184
9264
10764
1326
1320
1320
6
6
6
0.91
0.8
0.54
EWB D.B.
AMP Kw BtuH -
ALL 9,000 NORMINAL BTUH MODELS
Evaporator entering air temp (D.B.) = 80 deg F
TEMP (DEG F) AIR Temp EVAP AIR-EWB (DEG F)
ENT COND (40%RH)
62
67
72
BtuH
9423
10179
10584
Kw
670
663
653
75
Amps
3.1
3.1
3.1
SHR
0.89
0.66
0.49
BtuH
8766
9504
10080
Kw
727
718
711
85
Amps
3.3
3.3
3.3
SHR
0.91
0.69
0.5
BtuH
7965
9000
9684
Kw
800
800
800
95
Amps
3.7
3.7
3.7
SHR
0.91
0.71
0.5
BtuH
7101
8055
9072
Kw
866
864
865
105
Amps
4.0
4.0
4.0
SHR
0.92
0.75
0.51
BtuH
6138
6948
8073
Kw
947
943
943
110
Amps
4.4
4.3
4.3
SHR
0.91
0.8
0.54
E-TAC
GA
ALL 7,000 NORMINAL BTUH MODELS
Evaporator entering air temp (D.B.) = 80 deg F
N
T
(E
ar
in
in
fr
A
C
D
ALL 15,000 NORMINAL BTUH MODELS
Evaporator entering air temp (D.B.) = 80 deg F
TEMP (DEG F) AIR Temp EVAP AIR-EWB (DEG F)
ENT COND (40%RH)
62
67
72
BtuH
15705
16965
17640
Kw
1282
1268
1248
75
Amps
5.6
5.6
5.5
SHR
0.85
0.63
0.47
BtuH
14610
15840
16800
1391
1374
1360
Kw
85
Amps
6
6
6
SHR
0.87
0.66
0.48
BtuH
13275
15000
16140
Kw
1530
1530
1530
95
Amps
6.7
6.7
6.7
SHR
0.87
0.68
0.48
BtuH
11835
13425
15120
Kw
1657
1652
1654
105
Amps
7.2
7.2
7.2
SHR
0.88
0.72
0.49
BtuH
10230
11580
13455
Kw
1812
1804
1804
110
Amps
7.9
7.9
7.9
SHR
0.87
0.77
0.51
LEGEND
Entering Wet Bulb
Dry Bulb
Total Current
Total Power
Total Cooling Capacity
31 34
In
APPLICATIONS
NEW CONSTRUCTION
SHR
0.98
E-TAC
Amps
2.5
2.5
2.5
0.74
0.54
BtuH
6815
7700
8285
The Gree E-TAC Packaged
Terminal
Air Conditioning
Kw
640
640
640
(E-TAC) unit is 95
designed
to meet
the needs
of 2.8
the
Amps
2.8
2.8
architect, engineer, SHR
and contractor.
For 0.54
unit
0.99
0.77
BtuH support
6075
6892
7762
installation, Gree’s expert
network
will assist
Kw of the construction
693
691 project,
692
in all applicable105
aspects
Amps
3.0
3.0
3.0
from preparing a budget
to start-up.
SHR
0.99
0.81
0.55
BtuH
5251
5944
6907
Kw
758
755
755
110
Amps
3.3
3.3
3.3
SHR
0.99
0.87
0.58
Amps
3.3
3.3
3.3
SHR
0.91
0.69
0.5
BtuH
7965
9000
9684
Kw
800
800
800
If95you are replacing a unit in an existing
wall sleeve,
3.7
3.7
3.7
Amps
your options
include:
SHR
0.91
0.71
0.5
7101 existing
8055 wall
9072 sleeve with the
• BtuH
Replace the
Kw
866wall sleeve.
864
865 accessory sleeve
the polymer
See
105
Amps
4.0
4.0
section for selecting the 4.0
correct sleeve for
SHR
0.92
0.75
0.51
your
application.
BtuH
6138
6948
8073
NOTE: 947
in most943
cases, 943
when replacing the
Kw
110
Amps
4.4 the exterior
4.3
4.3
wall sleeve,
grille must also be
SHR
0.8
0.54
replaced. 0.91
RETROFIT/REPLACEMENT
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
•
•
•
•
Whisper--quiet performance, indoors and out
ALL 12,000 NORMINAL BTUH MODELS
No bulky
duct system
Evaporator entering air temp (D.B.) = 80 deg F
No separate equipment room
Temp
EVAP AIR-EWB
(DEG F)
TEMP (DEG
F) AIR or
No water
towers
additional
cooling
ENT COND (40%RH)
62
67
72
equipment
BtuH
12564
13572
14112
No complex
match--up 939
of different
HVAC
Kw
928
914
75
4.3
4.2
4.2
components Amps
SHR
0.89
0.66
0.49
Less sensitivity
to building
orientation
(sun,
BtuH
11688
12672
13440
wind, shade) Kw
1018
1006
996
85
Amps
4.6 to permit
4.6
4.5
Optional architectural
grille
custom
SHR
0.91
0.69
0.5
exterior appearance
BtuH
10620
12000
wall
sleeves/grilles:
Carrier,
GE,
Amana,
TEMP (DEG F) AIR Temp EVAP AIR-EWB (DEG F)
Trane, Friedrich
and NO
ENT COND (40%RH)
62
67and Bryant,
72
retrofit
kit is 17052
required.
BtuHaccessory
15182
16400
Kw
1240T series
1227 and1208
— Friedrich
ZoneAire wall
75
5.5
5.5
5.4
Amps
sleeves,
with
a
required
wall sleeve
SHR
0.88
0.65
0.48
extension
(see
accessory
Friedrich
BtuH
14123
15312
16240
Wall Sleeve
Kw Retrofit1345
1329 Adapter).
1316
85
12912
Kw
1120
1120
1120
Owner
Initial Cost Savings
for the Building
95
Amps
5.1
5.1
5.1
• No expensiveSHRcomponent
HVAC
system
0.91
0.71
0.5
purchase
BtuH
9468
10740
12096
Kw
1213or
1210
1211
• No equipment
room
maintenance
105
Amps
5.5
5.5
5.5
engineering staff
SHR
0.92
0.75
0.51
• Two--part delivery
to 8184
minimize
-site
BtuH
9264 on10764
damage 110 Kw
1326
1320
1320
Amps
6
6
• Weather--protected
wall sleeve
that
goes6 in
SHR
0.91
0.8
0.54
place during construction; chassis that slides
in place after construction
LEGEND
EWB
Entering
Bulb
• No seasonal changeover
required
for Wet
cooling
Dry Bulb
or heating -- units are D.B.
self--contained
comfort
AMP Total Current
systems
Kw Total Power
BtuH RH -
Use an existing sleeve and exterior grille. The
Gree NORMINAL
E-TAC will
fitMODELS
into:
ALL 15,000
BTUH
Evaporator entering
air
temp
(D.B.)
=
80
deg
F
— The following major competitors’
95
105
110
Total Cooling Capacity
Relative Humidity
32 35
4
Amps
SHR
BtuH
Kw
Amps
SHR
BtuH
Kw
Amps
SHR
BtuH
Kw
Amps
SHR
5.9
0.89
12833
1480
6.6
0.9
11441
1603
7.1
0.9
9889
1752
7.7
0.9
5.9
0.68
14500
1480
6.6
0.7
12978
1598
7.1
0.74
11194
1745
7.7
0.79
5.9
0.49
15602
1480
6.5
0.49
14616
1600
7.1
0.5
13007
1745
7.7
0.53
GA
Lower Operating Costs and Reliable Comfort
Whether you are designing a new structure or
EXPANDED
RATING
DATA
for
The Occupant
replacing packaged terminal air conditioning units in
an existing building,
E-TAC will- HEAT
meetPUMP
your MODELS • Heat pump models offer substantial savings
COOLINGGree
PERFORMANCE
over models with conventional electric
needs.
heaters
ALL 7,000 NORMINAL BTUH MODELS
ALL resistance
9,000 NORMINAL
BTUH MODELS
• HotelsEvaporator
and motels
entering air temp (D.B.) = 80 deg F
Evaporator
air tempunits
(D.B.) =allow
80 deg Ftenants to choose the
• entering
Individual
• Nursing homes and assisted living care
degree of comfort and operating economy.
TEMP (DEG F) AIR Temp EVAP AIR-EWB (DEG F)
centersTEMP (DEG F) AIR Temp EVAP AIR-EWB (DEG F)
reduces
downtime:
complete
• (40%RH)
Rapid servicing
62
67
72
62
67
72
ENT COND (40%RH)
ENT COND
• Offices
BtuH
8062
8709
9055
BtuH
9423be replaced
10179
10584
chassis can
in minutes without
Kw
536
531
522
Kw
663
653
• Apartments
disrupting670
other occupants.
75
75
Amps
2.4
2.3
2.3
Amps
3.1
3.1
3.1
• Single--family dwellings
• SHR
Each unit0.89operates
of other
SHR
0.96
0.72
0.53
0.66 independently
0.49
• Home conversions
and
residential
add-ons
units
in
the
building.
No
dependency
by
BtuH
7500
8131
8624
BtuH
8766
9504
10080
Kw
582
575
569
Kw
727
718
711
building on central HVAC system.
85
85
A
W
re
an
ne
EXPANDED RATING DATA
OUTDOOR TEMP D.B (DEG F)
NORNIMAL BtuH
37
42
47
52
SIZE
BtuH
5250
5540
6300
6900
7,000 Kw
509
518
540
549
Amps
2.3
2.4
2.4
2.5
BtuH
6005
6399
8100
8647
9,000 Kw
647
656
720
725
Amps
3.3
3.3
3.4
3.4
BtuH
7726
8531
10700
11278
12,000 Kw
883
917
1010
1039
Amps
4
4.1
4.5
4.7
BtuH
10530
10850
13300
14550
15,000 Kw
1197
1212
1300
1377
Amps
5.3
5.4
5.8
6.1
Based on 70 Deg F Indoor Temperature
D.B. AMP Kw BtuH RH -
57
7620
580
2.6
9245
735
3.5
12234
1073
4.9
15940
1439
6.3
E-TAC
GA
HEAT PUMP HEATING PERFORMANCE
LEGEND
Dry Bulb
Total current
Total Power
Total Cooling Capacity
Relative Humidity
N
T
(E
ar
in
in
fr
A
C
D
INDOOR FAN PERFORMANCE DATA
Model
Voltage
7000 BTUH Heat / Cool
7000 BTUH Heat Pump
Wet CFM*
Low
Medium
High
Low
Medium
High
208
235
250
270
220
235
250
230
260
280
300
240
260
280
265
260
280
300
240
260
280
208
235
250
270
220
235
250
230
260
280
300
240
260
280
265
260
280
300
240
260
280
208
245
260
280
225
240
260
230
270
290
310
250
270
290
265
270
290
310
250
270
290
208
270
290
305
250
270
290
230
300
320
340
280
300
320
15,000 BTUH Heat Pump
230
300
320
340
280
300
320
15,000 BTUH Heat / Cool
15,000 BTUH Heat Pump
265
300
320
340
280
300
320
7000 BTUH Heat / Cool
7000 BTUH Heat Pump
9000 BTUH Heat / Cool
9000 BTUH Heat Pump
9000 BTUH Heat / Cool
9000 BTUH Heat Pump
12,000 BTUH Heat / Cool
12,000 BTUH Heat Pump
GA
Dry CFM*
12,000 BTUH Heat / Cool
12,000 BTUH Heat Pump
15,000 BTUH Heat / Cool
* Dry = Heat Mode or Fan Only Mode --- Indoor Standard CFM
Wet = Cool Mode --- Indoor Standard CFM
33 36
In
6.1
6.0
6.0
5.8
5.8
6.0
5.7
5.9
6.0
5.8
6.2
6.2
NA
6.1
6.1
NA
6.1
6.1
NA
5.7
6.2
6.3
5.8
6.0
N
T
(E
ar
in
in
fr
A
C
D
In
See notes on page 38
57.9
57.2
55.0
62.0
61.5
60.2
265
62.7
57.4
55.8
62.3
61.5
57.5
High Heat
230
61.8
56.6
60.4
NA
5.6
NA
60.8
6.3
6.0
55.6
NA
NA
NA
53.6
54.6
60.0
60.9
208
NA
59.8
55.8
265
62.5
55.8
58.4
6.1
5.7
57.1
55.6
62.0
61.1
56.7
Medium
Heat
230
61.2
55.9
59.7
NA
5.5
NA
54.2
NA
NA
55.2
208
NA
NA
59.7
6.2
57.9
6.1
5.7
5.9
58.8
56.0
53.5
54.6
55.5
52.6
61.0
59.0
62.1
61.1
61.4
62.2
56.6
230
Low Heat
265
60.7
53.2
57.0
NA
5.5
NA
51.9
NA
NA
55.3
208
NA
NA
56.2
5.6
5.4
57.4
54.4
57.1
55.6
54.1
265
59.0
56.3
60.2
5.6
5.4
38
E-TAC
GA
5.5
6.2
5.7
5.7
5.6
6.2
5.7
NA
5.6
5.6
NA
5.4
5.5
6.0
NA
5.7
5.6
5.6
6.2
NA
5.4
NA
NA
5.6
5.4
5.5
5.3
5.6
5.3
6.2
6.1
6.0
5.6
NA
5.2
NA
NA
5.7
5.6
5.4
5.9
5.9
NA
NA
5.7
5.3
5.2
NA
5.9
5.7
NA
NA
5.1
59.4
60.4
NA
56.7
NA
55.9
51.9
53.2
NA
59.2
NA
57.3
NA
55.7
51.3
53.6
52.7
230
54.3
53.9
52.1
230
265
208
55.6
NA
49.3
208
IfIf you
you are
are replacing
replacing aa unit
unit in
in an
an existing
existing wall
wall sleeve,
sleeve,
your
your options
options include:
include:
•• Replace
Replace the
the existing
existing wall
wall sleeve
sleeve with
with the
the
the
the polymer
polymer wall
wall sleeve.
sleeve. See
See accessory
accessory sleeve
sleeve
section
section for
for selecting
selecting the
the correct
correct sleeve
sleeve for
for
your
your application.
application.
NOTE:
NOTE: in
in most
most cases,
cases, when
when replacing
replacing the
the
wall
wall sleeve,
sleeve, the
the exterior
exterior grille
grille must
must also
also be
be
replaced.
replaced.
•• Use
Use an
an existing
existing sleeve
sleeve and
and exterior
exterior grille.
grille. The
The
Gree
Gree GA
E-TAC
series
will
PTAC
fit into:
will fit into:
The following
following major
major competitors’
competitors’ wall
wall
—
— The
sleeves/grilles:
sleeves/grilles: Carrier,
Carrier, GE,
GE, Amana,
Amana,
Trane,
Trane, Friedrich
Friedrich and
and Bryant,
Bryant, and
and NO
NO
accessory
accessory retrofit
retrofit kit
kit isis required.
required.
—
— Friedrich
Friedrich TT series
series and
and ZoneAire
ZoneAire wall
wall
sleeves,
sleeves, with
with aa required
required wall
wall sleeve
sleeve
extension (see
(see accessory
accessory Friedrich
Friedrich
extension
Retrofit Wall
Wall Sleeve
Sleeve Adapter).
Adapter).
Retrofit
High Fan
5.6
5.6
5.4
5.4
5.2
55.8
54.6
55.1
51.2
53.5
58.1
57.0
51.4
51.1
265
34
44
W
re
an
ne
Heat
Heat pump
pump models
models offer
offer substantial
substantial savings
savings
over
over models
models with
with conventional
conventional electric
electric
resistance
resistance heaters
heaters
Individual
Individual units
units allow
allow tenants
tenants to
to choose
choose the
the
degree
degree of
of comfort
comfort and
and operating
operating economy.
economy.
servicing reduces
reduces downtime:
downtime: complete
complete
Rapid
Rapid servicing
chassis
chassis can
can be
be replaced
replaced in
in minutes
minutes without
without
disrupting
disrupting other
other occupants.
occupants.
Each
Each unit
unit operates
operates independently
independently of
of other
other
units
units in
in the
the building.
building. No
No dependency
dependency by
by
building
building on
on central
central HVAC
HVAC system.
system.
RETROFIT/REPLACEMENT
RETROFIT/REPLACEMENT
Medium
Fan
53.3
46.9
49.9
208
61.1
265
230
Low Fan
NA
61.1
55.9
57.6
208
230
High Cool
58.7
60.9
265
55.6
56.0
NA
NA
50.2
NA
NA
53.5
51.9
51.9
56.0
53.6
NA
54.5
NA
49.0
53.4
47.4
NA
57.1
NA
NA
62.8
62.3
58.3
62.0
61.2
59.5
55.4
NA
61.9
61.2
55.9
57.8
NA
61.4
61.2
62.4
NA
NA
62.0
57.9
60.0
60.3
60.6
56.8
230
Medium
Cool
NA
55.4
58.0
57.4
56.6
57.7
54.7
62.9
62.7
62.3
61.9
62.3
61.8
60.7
57.3
61.0
60.8
NA
57.9
60.7
265
208
59.1
5.3
NA
NA
4.9
5.4
5.1
5.1
NA
5.5
NA
5.3
4.7
5.0
6.1
5.9
6.1
6.1
6.1
5.8
NA
NA
5.6
6.0
5.9
6.1
6.1
6.1
5.7
NA
NA
5.5
6.0
5.8
6.1
61.8
61.2
61.7
NA
NA
61.6
57.6
55.9
60.0
59.9
NA
57.1
NA
60.2
55.2
56.5
208
230
Low Cool
HEAT PUMP
Operating
Mode
Volts
7000
9000
Owner
Initial
Initial Cost
Cost Savings
Savings for
for the
the Building
Building Owner
•• No
No expensive
expensive component
component HVAC
HVAC system
system
purchase
purchase
•• No
No equipment
equipment room
room or
or maintenance
maintenance
engineering
engineering staff
staff
•• TwoTwo--part
-part delivery
delivery to
to minimize
minimize onon--site
-site
damage
damage
•• WeatherWeather--protected
-protected wall
wall sleeve
sleeve that
that goes
goes in
in
place
place during
during construction;
construction; chassis
chassis that
that slides
slides
in
in place
place after
after construction
construction
•• No
No seasonal
seasonal changeover
changeover required
required for
for cooling
cooling
or
or heating
heating --- units
units are
are selfself--contained
-contained comfort
comfort
systems
systems
••
5.6
5.9
5.8
5.6
5.6
5.5
5.5
5.4
5.1
NA
5.0
NA
5.2
5.2
5.6
NA
5.3
4.9
4.7
NA
5.7
6.2
5.8
6.2
NA
6.1
5.8
5.6
NA
6.1
6.2
5.8
6.0
6.1
5.7
6.1
6.2
NA
5.6
5.8
6.0
NA
6.1
NA
5.6
5.7
6.1
NA
NA
6.1
NA
6.0
5.5
5.7
61.0
62.0
NA
61.8
NA
60.9
55.6
NA
60.5
NA
12000
HEAT / COOL
9000
7000
60.7
••
15000
••
12000
••
WhisperWhisper--quiet
-quiet performance,
performance, indoors
indoors and
and out
out
No
No bulky
bulky duct
duct system
system
No
No separate
separate equipment
equipment room
room
No
No water
water towers
towers or
or additional
additional cooling
cooling
equipment
equipment
No
No complex
complex matchmatch--up
-up of
of different
different HVAC
HVAC
components
components
Less
Less sensitivity
sensitivity to
to building
building orientation
orientation (sun,
(sun,
wind,
wind, shade)
shade)
Optional
Optional architectural
architectural grille
grille to
to permit
permit custom
custom
exterior
exterior appearance
appearance
NOMINAL SIZES (dBA)
••
••
••
••
15000
ADVANTAGES
ADVANTAGES FOR
FOR NEW
NEW
CONSTRUCTION
CONSTRUCTION
Design
Design Flexibility
Flexibility for
for the
the Architect/Engineer
Architect/Engineer
••
••
5.8
NA
5.4
5.5
NA
6.3
6.2
NA
6.2
6.2
NA
6.2
6.2
NA
12000
9000
7000
15000
12000
HEAT PUMP
9000
Indoor Sound Estimating Table (dBA and BELS)
7000
The
The Gree
GreeE-TAC
GA Packaged
series Packaged
Terminal AirTerminal
Conditioning
Air
Conditioning
(E-TAC) unit (PTAC)
is designed
unit to
is meet
designed
the needs
to meet
of the
the
needs
architect,
of theengineer,
architect, engineer,
and contractor.
and contractor.
For unit
For
unit
installation,
installation,
Gree’s
Gree’s
expert
expert
support
support
network
network
will assist
will
assist
in all in
applicable
all applicable
aspectsaspects
of the construction
of the construction
project,
project,
from preparing
from preparing
a budgeta to
budget
start-up.
to start-up.
A
Lower
Lower Operating
Operating Costs
Costs and
and Reliable
Reliable Comfort
Comfort
for
for The
The Occupant
Occupant
••
NEW
NEW CONSTRUCTION
CONSTRUCTION
INDOOR SOUND POWER DATA
GA
E-TAC
••
••
••
••
Hotels
Hotels and
and motels
motels
Nursing
Nursing homes
homes and
and assisted
assisted living
living care
care
centers
centers
Offices
Offices
Apartments
Apartments
SingleSingle--family
-family dwellings
dwellings
Home
Home conversions
conversions and
and residential
residential addadd--ons
-ons
NOMINAL SIZES (BELS)
••
••
HEAT / COOL
Whether
Whether you
you are
are designing
designing aa new
new structure
structure or
or
replacing
replacing packaged
packaged terminal
terminal air
air conditioning
conditioning units
units in
in
an
an existing
existingbuilding,
building,Gree
GreeGAE-TAC
Series will
will meet your
your
needs.
needs.
5.7
5.7
5.7
5.8
5.5
6.3
6.3
6.2
6.2
6.2
6.2
6.1
6.1
6.2
15000
APPLICATIONS
APPLICATIONS
--- --- --- ---
--- --- --- ---
70.6
265
Sound Transmission Coefficient (STC) = 23
--- --- --- ----- --- --- ---
74.0
73.2
72.4
70.2
230
71.7
NA
67.8
208
High Heat
71.7
35 39
4 5
E-TAC
GA
NOTES:
1. The tables above indicate the approximate indoor and outdoor sound levels of a 52M unit.
Tests were conducted in the Carrier Sound Testing Laboratory according to AHRI (Air Conditioning, Heating and Refrigeration Institute) Noise Rating Standard 300 for non ---ducted indoor air conditioning equipment.
2. NA = Not Available
--- --- --- ----- --- --- ----- --- --- --7.4
7.3
7.2
--- --- --- ----- --- --- ---
73.8
72.7
--- --- --- ---
--- --- --- ---
7.1
7.3
7.2
7.0
--- --- --- ---
--- --- --- ---
--- --- --- ---
NA
NA
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ----- --- --- ---
7.4
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
NA
NA
NA
7.4
7.2
7.1
6.8
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
7.4
7.2
7.0
--- --- --- ---
--- --- --- ----- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
73.8
74.0
72.4
70.2
70.6
72.7
73.2
6.8
--- --- --- ---
--- --- --- ---
--- --- --- ---
NA
NA
67.8
Medium
Heat
208
NA
--- --- --- ---
7.0
7.1
--- --- --- ---
--- --- --- ----- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
73.8
74.0
72.7
73.2
72.4
71.7
70.2
70.6
265
67.8
208
230
Low Heat
6.8
--- --- --- ---
--- --- --- ----- --- --- ---
NA
NA
NA
--- --- --- ---
6.9
7.0
73.3
72.5
72.2
69.4
73.1
72.4
71.3
69.6
73.0
73.0
72.0
72.9
71.3
69.3
69.9
230
High Cool
265
68.0
NA
NA
NA
67.4
208
69.6
69.4
73.0
70.7
73.0
71.3
69.3
69.9
230
265
72.9
70.7
6.7
NA
NA
72.0
7.0
6.9
72.5
73.3
72.4
72.2
73.1
6.7
72.0
NA
NA
71.3
68.0
NA
NA
72.0
NA
67.4
208
Medium
Cool
disrupting
other occupants.
It is normal
and desirable
to have some condensate
water
the ebase
to boost
operating efficiency.
• inEach
unit pan
operates
independently
of other
units
in
the
building.
No
dependency
by
NOTE: This unit will not always evaporate 100%
building on central HVAC system.
of the unit generated condensate and blown in
rain water. If it is necessary to control 100% of
RETROFIT/REPLACEMENT
the
condensate, the Drain Kit (Part No.: DRAINKIT-4PK)
and a a unit
building
condensate
drain
If you are replacing
in an existing
wall sleeve,
your options
include:
system
is recommended.
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ----- --- --- --NA
NA
NA
7.2
7.2
NA
7.1
7.1
NA
7.1
7.1
NA
7.1
7.0
72.5
69.4
70.7
69.9
265
72.9
73.0
72.2
73.3
6.9
72.4
69.6
73.0
72.0
71.3
69.3
230
Low Cool
7.3
--- --- --- ---
--- --- --- --7.4
7.3
7.3
NA
7.2
7.3
NA
7.3
7.2
NA
7.3
7.2
7.1
NA
71.3
73.1
7000
6.7
72.0
NA
15000
12000
NA
68.0
NA
NA
9000
7000
15000
12000
NA
9000
67.4
7000
Volts
Operating
Mode
208
HEAT / COOL
HEAT PUMP
NOMINAL SIZES (dBA)
W
re
an
ne
disposal
system.
Themodels
outdoor
fan substantial
prop has a savings
built in
• Heat
pump
offer
slinger ring
drawswith
condensate
water through
overwhich
models
conventional
electrica
suction port
built
into
the
outdoor
coil
shroud.
The
resistance heaters
water
passes
though
the
suction
port
and
is
sprayed
• Individual units allow tenants to choose the
on the degree
warm of
outdoor
evaporation.
Thus
comfortcoil
andfor
operating
economy.
providing
better
disposal
of
excess
condensate
and
• Rapid servicing reduces downtime: complete
improving
unit
operating
efficiency.
chassis can be replaced in minutes without
265
Outdoor Sound Estimating Table (dBA and BELS)
If
a PTAC
unita budget
is oversized
(cooling capacity is
from
preparing
to start-up.
greater than required load for the specific application),
the
unit will cool FOR
the space
ADVANTAGES
NEWdown to the desired
desired
temperature
too
quickly.
CONSTRUCTION
The
unit
will cycle
on Architect/Engineer
and off, however,
Design
Flexibility
for the
dehumidification only takes place when the unit is
• Whisper--quiet performance, indoors and out
operating. The result of this type of application in a
No bulky
systemwould be a cool, yet
hot •and/or
humidduct
climate
•
No
separate
equipment
room
excessively humid, space.
• No water towers or additional cooling
Air Infiltration
equipment
Excessive
infiltration
can
problems
• No air
complex
match-up intensify
of different
HVAC
associated
with undersizing or oversizing a PTAC
components
unit.• This
cansensitivity
be the cause
of insufficient
cooling,
Less
to building
orientation
(sun,
dehumidification,
or
heating.
Sources
of air
wind, shade)
infiltration
include
vents, gapsgrille
around
windows
and
• Optional
architectural
to permit
custom
doors, and
improperly
sealed
floors,
ceilings
or
wall
exterior appearance
joints.
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
A
Condensate
Removal
Lower Operating
Costs and Reliable Comfort
for TheGA
Occupant
Gree’s
series has a new condensate (water)
230
9000
installation, Gree’s expert support network will assist
Oversizing
in all applicable aspects of the construction project,
7.3
--- --- --- ---
--- --- --- ---
--- --- --- ----- --- --- ---
--- --- --- ---
7.4
7.3
--- --- --- ---
--- --- --- ---
--- --- --- ---
NA
7.3
7.3
7.2
6.9
7.2
7.1
7.0
7.3
7.3
7.3
7.2
NA
NA
6.8
7.3
NA
7.3
6.9
7.2
7.1
7.2
7.0
7.3
7.3
7.2
NA
NA
6.8
NA
7.3
7.3
7.3
7.2
6.9
7.2
7.3
7.2
7.1
7.0
7.3
NA
NA
6.8
NA
12000
9000
7000
15000
NA
12000
HEAT PUMP
If a PTAC unit is undersized (cooling capacity is less
than
required
load for an application), the unit
NEW
CONSTRUCTION
will
not
be
able
cool the Terminal
space down
the desired
The Gree E-TACtoPackaged
Airto
Conditioning
temperature
during
very
hot
days.
The
result
be
(E-TAC) unit is designed to meet the needscould
of the
warm
and
humid
or
warm
and
dry
conditioned
space.
architect, engineer, and contractor. For unit
OUTDOOR SOUND POWER DATA
GA
E-TAC
NOMINAL SIZES (BELS)
HEAT / COOL
Installation instructions are shipped with all PTAC
Whether
are designing
a new structure
or
units.
It is you
important
that air conditioning
systems be
replacing
packaged
terminal
air
conditioning
units
properly sized and installed for each application in
in
an existing
building,
Greetemperature
E-TAC willandmeet
your
order
to achieve
the desired
humidity
needs. within the space to be conditioned. It is
levels
strongly
recommended
that a professional engineer
• Hotels
and motels
match
the
PTAC
units
with
the building
• Nursing homes and
assisted structure
living and
care
climate. centers
The • following
Offices application considerations are all
important in choosing the proper PTAC system for
• Apartments
the building structure.
• Single--family dwellings
• Home conversions and residential add--ons
Undersizing
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
--- --- --- ---
15000
APPLICATION
CONSIDERATIONS
APPLICATIONS
N
T
(E
ar
in
in
fr
A
C
D
In
Whether you are designing a new structure or
OUTDOOR
GRILLE
SIZING
replacing packaged
terminal air
conditioning units in
IMPORTANT:
If
you
wish
to
use
grillemeet
not made
an existing building, Gree E-TACa will
your
for
the Gree E-TAC contact Gree Application
needs.
Engineering.
• Hotels and motels
The following guidelines must be followed in the
• Nursing homes and assisted living care
initial selection of any alternate exterior grille or
centers
louver:
• Offices
1. The louver must have a minimum of 65% free
• area.
Apartments
Free area is the minimum area of the
• opening
Singlein-family
an air dwellings
inlet or outlet in which air can
Freeconversions
Area (%) = and
X/Y.residential add--ons
• pass.
Home
2. The louver should be attached to the wall sleeve
in a CONSTRUCTION
manner that will prevent recirculation of
NEW
condenser discharge air into the inlet. In most
The Gree
E-TAC Packaged
Conditioning
applications,
baffles, Terminal
splitters,Airand/or
gasket
(E-TAC)
unit
is
designed
to
meet
the
needs
of end
the
will be required between the chassis
tube
architect,
contractor.
For unit
sheets engineer,
and the andlouver
to prevent
air
installation,
Gree’s
expert
support
network
will assist
recirculation.
in all applicable aspects of the construction project,
The above criteria must be followed, since a louver
from preparing a budget to start-up.
that is restrictive or allows re--circulation will result
in
a reduction of the
unit’s
capacity and efficiency
ADVANTAGES
FOR
NEW
and will ultimately shorten the compressor life.
•
•
•
Lower Operating Costs and Reliable Comfort
for The Occupant
W
re
an
ne
•
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
• Individual units allow tenantsX to choose the
degree of comfort and operating economy.
Y
Y
reduces downtime: complete
• XRapid servicing
X
X
Y
chassis can be replaced in minutes without
disrupting other occupants.
Y
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
Louver Dimensional Reference
RETROFIT/REPLACEMENT
Sample
Calculations
If you are replacing
a unit
in an existing wall sleeve,
your options include:
x
Free the
Areaexisting
(%) = wall
x 100
• Replace
sleeve with the
y
the polymer wall sleeve. See accessory sleeve
x=1
section for selecting
y = 1.5the correct sleeve for
your application.
NOTE: in most
1 cases, when replacing the
F.A.
(%) = the exterior
x 100 =grille
66.7%
wall
sleeve,
must also be
1.5
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
A
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
E-TAC
E-TAC
FIELDAPPLICATIONS
-INSTALLED ACCESSORIES
N
T
(E
ar
in
in
fr
A
C
D
In
36
4
WIRING
SCHEMATIC
APPLICATIONS
Lower Operating Costs and Reliable Comfort
for The Occupant
•
•
•
•
•
Hotels and motels
Nursing homes and assisted living care
centers
Offices
Apartments
Single--family dwellings
Home conversions and residential add--ons
•
•
•
GA
NEW CONSTRUCTION
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree GA series PTAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
•
•
•
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
The Gree GA series Packaged Terminal Air
Conditioning (PTAC) unit is designed to meet the
needs of the architect, engineer, and contractor. For
unit installation, Gree’s expert support network will
assist in all applicable aspects of the construction
project, from preparing a budget to start-up.
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- unitsE-TAC
are self-–-contained
comfort Schematic for Standard Units
Typical Wiring
systems
(Except Models with 5KW Elec. Heaters)
37
4
40
W
re
an
ne
E-TAC
GA
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree GA Series will meet your
needs.
•
•
A
N
T
(E
ar
in
in
fr
A
C
D
In
WIRING
SCHEMATIC
APPLICATIONS
Lower Operating Costs and Reliable Comfort
for The Occupant
E-TAC
•
•
•
•
•
Hotels and motels
Nursing homes and assisted living care
centers
Offices
Apartments
Single--family dwellings
Home conversions and residential add--ons
•
•
•
NEW CONSTRUCTION
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
•
•
•
•
•
•
•
Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
Whisper--quiet performance, indoors and out
No bulky duct system
No separate equipment room
No water towers or additional cooling
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
exterior appearance
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
E-TAC
– Typicalrequired
Wiringfor
Schematic
• No seasonal
changeover
cooling for Models with 5KW Elec. Heaters
or heating -- units are self--contained comfort
systems
38
4
40
W
re
an
ne
E-TAC
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
•
•
A
N
T
(E
ar
in
in
fr
A
C
D
In
APPLICATION
CONSIDERATIONS
TYPICAL
APPLICATIONS
WIRING
SCHEMATIC FOR ENERGY
If a PTAC unit is undersized (cooling capacity is less
than
required
load for an application), the unit
NEW
CONSTRUCTION
will
not
be
able
cool the Terminal
space down
the desired
The Gree E-TACtoPackaged
Airto
Conditioning
temperature
during
very
hot
days.
The
result
be
(E-TAC) unit is designed to meet the needscould
of the
warm
and
humid
or
warm
and
dry
conditioned
space.
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
Oversizing
in all applicable aspects of the construction project,
If
a PTAC
unita budget
is oversized
(cooling capacity is
from
preparing
to start-up.
greater than required load for the specific application),
the
unit will cool FOR
the space
ADVANTAGES
NEWdown to the desired
desired
temperature
too
quickly.
CONSTRUCTION
B
W
B
The
unit
will W cycle
on Architect/Engineer
and off,
however,
Design
Flexibility
for the
dehumidification only takes place when the unit is
• Whisper--quiet performance, indoors and out
operating. The result of this type of application in a
No bulky
systemwould be a cool, yet
hot •and/or
humidduct
climate
•
No
separate
equipment
room
excessively humid, space.
• No water towers or additional cooling
Air Infiltration
equipment
Excessive
infiltration
can
problems
• No air
complex
match-up intensify
of different
HVAC
associated
with undersizing or oversizing a PTAC
components
unit.• This
cansensitivity
be the cause
of insufficient
cooling,
E-TAC
#1
E-TAC
#2 (sun,
Less
to building
orientation
dehumidification,
or
heating.
Sources
of air
wind, shade)
LEGEND
infiltration
vents,
gapsgrille
around
windows
and
AWG
--- include
American
Wire Gage
• Optional
architectural
to permit
custom
B and
---improperly
Black
doors,
sealed
floors,
ceilings
or
wall
appearance
PTAC exterior
--- Packaged
Terminal Air Conditioner
joints.
W
--- White
Initial Cost Savings for the Building Owner
NOTES:
• No expensive component HVAC system
1. To size transformer, use the following equation:
purchase
Quantity of PTAC units x 12 va = Transformer Size (va)
•Example:
No 110
equipment
PTAC Units room
x 12 va =or
1320maintenance
va Transformer
2. Following
are recommended
wire sizes:
engineering
staff
WIRE
SIZEdelivery
NO.
MAXIMUM
LENGTHonft -site
(m)
•AWGTwo-part
to minimize
24
400
(121.9)
damage
22
600 (182.9)
20 -protected wall sleeve
900that
(274.3)
• Weathergoes in
1500 (457.2)
place18
during
construction;
chassis
that
16
2000 (609.6)slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
A
Condensate
Removal
Lower Operating
Costs and Reliable Comfort
for TheGA
Occupant
Gree’s
series has a new condensate (water)
W
re
an
ne
disposal
system.
Themodels
outdoor
fan substantial
prop has a savings
built in
• Heat
pump
offer
slinger ring
draws
condensate
water
through
overwhich
models
with
conventional
electrica
ROOM N
suction port
built
into
the
outdoor
coil
shroud.
The
resistance heaters
water
passes
though
the
suction
port
and
is
sprayed
• Individual units allow tenants to choose the
on the degree
warm of
outdoor
evaporation.
Thus
comfortcoil
andfor
operating
economy.
providing
better
disposal
of
excess
condensate
and
• Rapid servicing reduces downtime: complete
improving
unit
operating
efficiency.
chassis can be replaced in minutes without
disrupting
other occupants.
It is normal
and desirable
to have some condensate
water
the ebase
to boost
operating efficiency.
• inEach
unit pan
operates
independently
of other
units
in
the
building.
No
dependency
by
NOTE: This unit will not always evaporate 100%
building on central HVAC system.
of the unit generated condensate and blown in
rain water. If it is necessary to control 100% of
RETROFIT/REPLACEMENT
the
condensate, the Drain Kit (Part No.: DRAINKIT-4PK)
and a a unit
building
condensate
drain
If you are replacing
in an existing
wall sleeve,
FIELD-SUPPLIED
your options
include:
system
is recommended.
24-V
TRANSFORMER
• Replace the existing
wall
sleeve with the
(SEE NOTE 1)
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
B
W
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
E-TAC
#N
extension
(see
accessory Friedrich
Retrofit Wall Sleeve Adapter).
39 541
4
E-TAC
GA
GA
E-TAC
Installation instructions areINTERFACE
shipped with all PTAC
MANAGEMENT
Whether
are designing
a new structure
or
units.
It is you
important
that air conditioning
systems be
replacing
packaged
terminal
air
conditioning
units
in
properly sized and installed for each
FRONTapplication
DESK SWITCH in
PANEL
an existing
building,
Greetemperature
E-TAC willandmeet
your
order
to achieve
the desired
humidity
needs. within
ROOM 10
0
ROOM 101 It is
levels
the
space to be conditioned.
strongly
recommended
that a professional engineer
• Hotels
and motels
match
the
PTAC
units
with
the building
• Nursing homes and
assisted structure
living and
care
climate. centers
The • following
Offices application considerations are all
important in choosing the proper PTAC system for
• Apartments
the building structure.
• Single--family dwellings
• Home conversions and residential add--ons
Undersizing
N
T
(E
ar
in
in
fr
A
C
D
In
TYPICAL
APPLICATIONS
WIRING SCHEMATIC FOR MULTIPLE E-TACS
Lower Operating Costs and Reliable Comfort
CONNECTED
TO AaSINGLE
WALL
THERMOSTAT
Whether you are designing
new structure
or
•
•
E-TAC
•
•
•
•
The Gree E-TAC Packaged TerminalWAir Conditioning
(E-TAC) unit is designed to meet Gthe needs of the
architect, engineer, and contractor.
For unit
O
installation, Gree’s expert support network
will assist
C
in all applicable aspects of the construction project,
from preparing a budget to start-up.
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
R
•
•
•
Y
W
Hotels and motels
G
Nursing homes and assisted
living care
O
centers
C
Offices
Apartments
Single--family dwellings
Home conversions and residential add--ons
Y
•
•
•
•
•R
W
R
NEW CONSTRUCTION
UNIT 1
2
Whisper--quiet UNIT
performance,
Yindoors and out
W
No bulky duct system
No separate equipment roomG
O
No water towers or additional
cooling
C
equipment
No complex match--up of different HVAC
components
Less sensitivity to building orientation (sun,
wind, shade)
Optional architectural grille to permit custom
R
exterior appearance
UNIT 3
Y
Owner
Initial Cost Savings for the Building
W
• No expensive componentG HVAC system
O
purchase
C
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
W
re
an
ne
for The Occupant
•
G
O
•C
•
Heat pump models offer substantial savings
over T’STAT
models with conventional electric
resistance heaters
Individual units allow tenants to choose the
degree of comfort and operating economy.
Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
— The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
1. Do not daisy chain R (24 VAC).
2. Maximum of 4 E-TAC units can be connected to one single wall
thermostat.
3. Wall thermostat wire is field-supplied and should be 18 to
20 gage solid thermostat wire.
40 42
4
E-TAC
GA
replacing packaged terminal air conditioning units in
an existing building, Gree E-TACR will meet your
MASTER
needs.
Y
PTAC
A
N
T
(E
ar
in
in
fr
A
C
D
In
PACKAGED
TERMINAL COOLING UNIT
APPLICATIONS
WITH
HEAT PUMP OR ELECTRIC HEATING
Lower Operating Costs and Reliable Comfort
Whether you are designing a new structure or
W
re
an
ne
for The Occupant
HVAC
Specifications
replacingGuide
packaged
terminal air conditioning units in
Size
Range:
an existing building, Gree E-TAC will meet your
pump models
offer substantial
Part• 2 Heat
— Chassis
Description
savings
over models with conventional electric
2.1 General:
resistance heaters
The • chassis
shall
a tenants
factoryIndividual
unitsbe
allow
to-assembled,
choose the
single--piece
and/or
cooling unit,
that is
degreeheating
of comfort
and operating
economy.
simple to install and operate. Just slide the chassis
• Rapid servicing reduces downtime: complete
into a wall sleeve, plug it into an outlet, and operate
chassis can be replaced in minutes without
after installation. The chassis dimensions shall not
disrupting other occupants.
exceed 42” (1067 mm) wide and 16“ (406 mm) high
•
Each
unit inoperates
independently
other
with room
cabinet
place. The
chassis shallofconsist
units
in
the
building.
No
dependency
by
of the following functional sections and components:
building on central HVAC system.
A. Certifications:
System shall be approved and certified by UL &
RETROFIT/REPLACEMENT
UL, Canada. Chassis shall meet ASHRAE Standard
If you
unit inefficiency.
an existing wall sleeve,
90.1are
forreplacing
minimumaenergy
your
options
include:
B. Operating Characteristics:
• Replace
thecapable
existing
wall sleeve
with the
Chassis
shall be
of starting
and running
at
polymer
wall sleeve.
See accessory
sleeve
115˚ Fthe(46.1˚
C) ambient
outdoor
temperature
per
section
forcriteria
selecting
the Standard
correct sleeve
maximum
load
of ARI
310/380.for
your
application.
C. Electrical:
NOTE:
in most
cases,
the
The power
cord will
be 58”
(1473when
mm) replacing
for 208/230v
wall
sleeve,
the
exterior
grille
must
also
be
models or 15“ (381 mm) for 265v models. The
replaced.
Hardwire kit accessory will provide 36” (914 mm)
Use anconduit.
existingThe
sleeve
and exterior
grille.shall
The
of• flexible
chassis
current draw
Gree E-TAC
fit into:
be specified
on thewill
chassis
nameplate and match
electrical
requirements
specified
on the wall
Contract
following major
competitors’
— The
drawingsleeves/grilles:
schedule and specifications.
Carrier, GE, Amana,
The power
cordFriedrich
plug configuration
Trane,
and Bryant,shall
and conform
NO
to NEMA
standards
andkitthe
rating shall support
accessory
retrofit
is required.
the current
draw ofT the
electric
— Friedrich
series
and resistance
ZoneAire heater.
wall
For 265v
installations,
codes require
use of
sleeves,
with aULrequired
wall the
sleeve
an electrical
equipped
for Friedrich
power cord
extension
(see subbase
accessory
usage Retrofit
or hardwire
conduit
for non--corded
Wall Sleeve
Adapter).
installations.
D. Safeties:
Compressor shall have automatic reset, over
temperature and over current protection. The fan
motors shall have an inherent, automatic reset
over temperature protection. The electric heater
shall have two over temperature protectors.
needs.
Cooling:
7,200 to 15,000 Btuh
Electrical
Heating:5,600
• Hotels
and motels to 17,100 Btuh
Heat• Pump:
6,100
to 13,800
Nursing homes
and Btuh
assisted living care
Model Numbers:
centers
Cooling
with Electric Heat
• Offices
Heat• Pump
with Electric Heat
Apartments
• Single--family dwellings
Part• 1 Home
— System
Description
conversions
and residential add--ons
Packaged Terminal Air Conditioners shall be of the
sizes and capacities as shown on the contract drawing
NEW CONSTRUCTION
schedule and in the specifications.
The Gree
E-TAC
Packaged
Terminal
Air Conditioning
System
shall
be tested
to insure
no water
infiltration
(E-TAC)
unit
is
designed
to
meet
the
needs
of per
the
into the room, when tested at eight inches of rain
architect,
For unit
hour
with 40engineer,
mph (64.4and
KPh)contractor.
wind.
installation, Gree’s expert support network will assist
The complete system shall consist of the following:
in all applicable aspects of the construction project,
A.
Packaged
Heat
Pump or Heat/Cool
from
preparingTerminal
a budget to
start-up.
Chassis : See section 2 -- Chassis Description
B.
Power Cord orFOR
Hardwire
ADVANTAGES
NEWKit shall provide the
power
connection
to
the
unit.
CONSTRUCTION
C.
Insulated
Polymer
Sleeve shall provide
Design
Flexibility
for Wall
the Architect/Engineer
excellent thermal insulation, be textured to hide
• Whisper--quiet performance, indoors and out
scratches and prevent shine, will have superior
• No noise
bulky duct
systemand shall be corrosion
outdoor
absorption
•
No
separate
equipment
roomThe Wall Sleeve
free for the life of the product.
• No
towers
or (1067
additional
cooling
must
have water
dimensions
of 42”
mm) width
x
equipment
16“ (406
mm) height x 14--7/8” (377.8 mm) depth
and
be complex
shipped with
• No
match-a-uprear
of weather
different barrier
HVAC
installed.
components
D. Wall
Sleeve
Moldingtoshall
trim the
wall sleeve
to
• Less
sensitivity
building
orientation
(sun,
the existing
wall, to hide wall imperfections and
wind, shade)
irregularities
to the sleeve
opening.
• Optionaldue
architectural
grille
to permit custom
E. Outdoor
Polymer
Louvered Grille shall resist
exterior
appearance
corrosion, breakage and match the color specified
Initial Cost Savings for the Building Owner
on drawing schedule and specifications.
• No expensive component HVAC system
F. Subbase will support the wall sleeve when it
purchase
extends into the room more than 4“ (101.6 mm).
• No equipment
maintenance
Subbase
must comeroom
fromor the
factory
engineering
staff
pre-assembled, with a receptacle (size as specified
• drawing
Two--part
delivery
to minimize on--site
on
schedule
and specifications).
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
41
4
43
E-TAC
E-TAC
A
N
T
(E
ar
in
in
fr
A
C
D
In
A
THERMOSTAT
enabled
or
disabled,
EMERGENCY HEAT (for heatpumps), and 4
Lower
Operating Costs and Reliable Comfort
optional SETPOINT LIMIT selections.
W
re
an
ne
for The Occupant
• Heat
models offer
substantial
Fan
cycle pump
configuration
switches,
will savings
allow
over
models
with
conventional
electric
continuous fan operation for maximum comfort
or
cycleresistance
operationheaters
for maximum energy savings.
Settings
can beunits
different
both toheating
• Individual
allowfor
tenants
chooseand
the
cooling
operations,
forand
maximum
degree
of comfort
operating comfort
economy.and
efficiency.
• Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
All standard
shall have Temperature
disrupting models
other occupants.
Limiting
control,
with
easy to configure
• Each unit operates four
independently
of other
settings.
Temperature
limiting
a room
units in the building. No allows
dependency
by
temperature
range
to
be
set,
to
avoid
extreme
building on central HVAC system.
temperature settings, to maximize energy savings.
RETROFIT/REPLACEMENT
Emergency Heat Switch (Heat Pump Models
If you
are shall
replacing
a unit
an existing wall
sleeve,
Only)
disable
thein compressor
in heating
your
options
include:
mode and only allow the use of electric heat
during
heating the
cycles.
The Emergency
Heat
switch
• Replace
existing
wall sleeve
with
the
is active
at all outdoor
ambientSee
temperatures.
the polymer
wall sleeve.
accessory sleeve
section for selecting the correct sleeve for
All units
be capable of interfacing to a wall
your shall
application.
thermostat;
blank
label to
cover the
out when
NOTE:have
in amost
cases,
replacing
the
control
for the
wallexterior
thermostat
applications;
wallpanel
sleeve,
grille must
also be
and have
a removable wall thermostat terminal
replaced.
block,
to
No additional
• Use ansimplify
existing field
sleevewiring.
and exterior
grille. The
field--installed
kits
shall
be
required.
Gree E-TAC will fit into:
— The following major competitors’ wall
Wall thermostat
interface
shall GE,
provide
two fan
sleeves/grilles:
Carrier,
Amana,
speed selections
to
maximize
comfort.
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
Compatible with 2 wire central desk control
— Friedrich T series and ZoneAire wall
systems.
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Freeze Guard to automatically activate the electric
Retrofit Wall Sleeve Adapter).
heater and indoor fan to warm the room, to
prevent damage from freezing temperatures.
Freeze guard will be active as long as there is
power supplied to the unit. Unit shall have the
ability to disable Freeze guard, if needed.
Unit shall have the option to display temperature
in ˚F or ˚C.
Unit will have memory; in case power is lost, unit
will return to all previous settings.
Unit will have a random compressor restart after a
power outage, to prevent power surges due to
many units turning on at the same time.
Room temperature sensing shall use a Solid state
thermostat control.
42 44
4
E-TAC
GA
E-TAC
E.
Air Flow System:
APPLICATIONS
For superior sound and comfort, the airflow
Whether
are consist
designingof a two,
new structure
or
system you
shall
direct--drive
replacing
packaged
terminalfan
air motors.
conditioning
units in
permanently
lubricated
The outdoor
an fan
existing
Greespeed,
E-TAC
will
meet your
motor building,
will be single
with
a dynamically
balanced, corrosion resistant, multi-blade axial
needs.
flow
withmotels
integrated slinger ring. The indoor
• design,
Hotels and
fan motor will three speeds, with a dynamically
• Nursing
homes tangential
and assisted
balanced,
aluminum,
blowerliving
wheel,care
to
centers
assure uniform air distribution and optimal sound.
• Offices
Both
Fan Motors shall be of an enclosed design to
• Apartments
reduce
the effects of moisture and corrosion.
• Single--family
dwellings
F. Compressor
& Refrigerant:
The
rotary-conversions
-type Compressor
shall addbe-ons
fully
• Home
and residential
hermetic with internal and external vibration
isolation. The refrigeration system will be sealed
NEW
CONSTRUCTION
and contain a full refrigerant charge (R410A).
TheCoils:
Gree E-TAC Packaged Terminal Air Conditioning
G.
(E-TAC)
unit and
is designed
to meet
thebeneeds
of the
Condenser
evaporator
coils to
constructed
architect,
engineer, copper
and and
contractor.
unit
of high-efficiency
aluminum, For
necessary
installation,
Gree’s
expert
support
network
will
assist
to achieve EER and COP rating, as specified on
in the
all applicable
aspects
chassis name
plate.of the construction project,
from
preparing
a
budget
to start-up.
H. Factory--Installed Electric
Heater:
The factory--installed, open coil type, electric
ADVANTAGES FOR NEW
heater is standard in heat/cool and heat pump
CONSTRUCTION
chassis. The electric heater shall contain both an
Design
Flexibility
forathe
automatic
reset and
one-Architect/Engineer
-shot over temperature
protection
device.
heating indoors
capacityand
of out
the
• Whisper-quiet The
performance,
electric
heater
shall
be
as
identified
on
the
• No bulky duct system
Contract
drawing
schedule
• No separate
equipment
room and in the
specifications.
• No water towers or additional cooling
I. Controls:
equipment
All standard models shall be equipped with
• No complex match--up of different HVAC
electronics, for added features and improved
components
reliability of the unit.
• Less sensitivity to building orientation (sun,
wind, shade)
The chassis
shall have an easy to operate, user
• Optional
architectural
permittocustom
friendly,
electronic
display grille
with to
simple
push,
appearance
large exterior
digital buttons.
All will be easily accessible
and covered
by a hinged
door.
Initial
Cost Savings
for the
Building Owner
• No expensive component HVAC system
The mode
selection control shall consist of OFF,
purchase
FAN ONLY, HEAT, COOL and DRY operations.
• No equipment room or maintenance
There will be 3 optional Fan Speed Options, LOW,
engineering staff
MED or HIGH. The temperature selection will be
• Two--part
delivery
to simple
minimize
on--site
controlled
by color
coded,
to operate
damage
warmer and cooler buttons. The upper and lower
• Weather-protected limits,
wall sleeve
in
setpoint
temperature
can that
be goes
easily
place during construction; chassis that slides
configured.
in place after construction
All
shall have
a configuration
dipswitch,
• models
No seasonal
changeover
required for
cooling
easilyoraccessible
for optimal
comfort settings,
heating -- units
are self--contained
comfort
CONTINUOUS
systems or CYCLE fan mode in HEATING,
CONTINUOUS or CYCLE fan mode in COOLING,
FREEZE GUARD enabled or disabled, WALL
N
T
(E
ar
in
in
fr
A
C
D
In
4. Sleeve Molding (PN: SLEEVE--MOLDING)
shall trim the wall sleeve to the existing wall to
Lower
Operating Costs and Reliable Comfort
hide wall joints and irregularities due to the
for The
Occupant
sleeve
opening.
•
Heat
pump Grille
models(PN:GRILLEoffer substantial
savings
5. Architectural
-PLA--xxxxx
or
over
models
with
conventional
GRILLE--ALU--xxxxx) shall be polymeric forelectric
long
resistance
durable
life orheaters
painted aluminum for a superior
• color
Individual
allow tenants to choose the
match tounits
the building.
degree
of
comfort
and operating economy.
6. Subbase (PN: PTAC-SUBBASE-A)
shall be
servicing
downtime:
• pre-Rapid
the factory
and ULcomplete
listed.
-assembled
fromreduces
chassisoptions
can beinclude:
replaced in minutes without
Subbase
other occupants.
—disrupting
Non- electrical
subbase:
The
• Each
unit
operatessubbase
independently
non--electrical
shall ofbeother
units
in the building.and
No dependency
pre--assembled
provides by
building
on central
HVAC
mechanical
support
andsystem.
requires no
wiring.
RETROFIT/REPLACEMENT
— Electrical subbase: The electrical
have
electrical
If you are subbase
replacingshall
a unit
in an
existingjunction
wall sleeve,
box
containing
a
receptacle
for corded
your options include:
units. the existing wall sleeve with the
• Replace
7. Drain
kit (PN:
DRAIN-KIT-1PK): sleeve
This
the polymer
wall sleeve.
See
accessory
universal
kit shall the
be correct
used internally
or
section drain
for selecting
sleeve for
externally
to route excess condensate to a
your application.
drainage
system.
It can
be field-installed
on any
NOTE:
in most
cases,
when replacing
the
wall
sleeve.
The
drain
kit
shall
be
attached
to the
wall sleeve, the exterior grille must also
be
to replaced.
the exterior right or left side of the wall
external sleeve
draining
may begrille.
mounted
• sleeve
Use for
an existing
andorexterior
The
to Gree
the bottom
of
the
wall
sleeve
for
internal
E-TAC will fit into:
draining. The drain kit shall include both a
— The following major competitors’ wall
straight tube and a 90˚ bend tube.
sleeves/grilles: Carrier, GE, Amana,
8. Wall Trane,
Thermostats
Friedrich and Bryant, and NO
A. Wireless
Wall
Thermostat
(PN: TT-N-631W)
accessory
retrofit
kit is required.
The
wall and
thermostat
and wall
receiver
—wireless
Friedrichdigital
T series
ZoneAire
module
provide
maximum
temperature
control
sleeves, with a required wall sleeve
without
pulling
wires.
The
non-programmable
extension (see accessory Friedrich
wall Retrofit
thermostat
complete with LCD
Wallcomes
Sleeve Adapter).
display, backlighting and two speed fan control.
B. Wired Wall Thermostats (PN: TT-N-411 &
PN: TT-N-421) The digital wall thermostat shall
have a large LCD display with backlighting,
operate with 24VAC, be non-programmable,
easy to use and provide maximum guest comfort.
43
4
45
A
W
re
an
ne
E-TAC
GA
E-TAC
J.
Front Panel (supplied with chassis): Front
APPLICATIONS
panel shall be constructed of a polymer material to
Whether
you areand
designing
or
resist breakage
corrosion.a Itnew
shallstructure
have a front
replacing
packaged
air conditioning
unitsand
in
louvered
surface terminal
with integrated
control door
an air
existing
Gree shall
E-TAC
will meet
your
filters. building,
The air filters
be easily
accessible
without removing the front panel from the chassis.
needs.
K. Air
The
chassis shall contain air filters,
• Filters:
Hotels and
motels
with
a
minimum
of
arrestance
ASHRAE
• Nursing homes40%
and
assistedperliving
care
Standard
52.1.
Two
easily
accessible
front
access
centers
supply air filters, shall be interchangeable,
• Offices
washable
and permanent type. The vent filter shall
•
Apartments
be a one--piece, removable and washable type
• Single--family dwellings
filter.
• -Directional
Home conversions
andGrille:
residential
add--ons
Discharge
Bi--directional
L. Bipolymer discharge grille shall resist corrosion and
breakage.
It shall be easily set to direct air at 40
NEW
CONSTRUCTION
degrees from horizontal or 80 degrees from
Thehorizontal.
Gree E-TAC
Packaged
Terminal Air
Conditioning
This
non--metallic
discharge
grille
(E-TAC)
unit
is
designed
to
meet
the
needs
of
the
shall be cool to the touch during the heating cycle.
architect, engineer, and contractor. For unit
M.Ventilation: The chassis shall have a manual
installation, Gree’s expert support network will assist
adjustable fresh air vent with a concealed manual
in all applicable aspects of the construction project,
control. The vent control shall allow a maximum
from
a budget
to start-up.
of preparing
up to 65 CFM
of fresh
air to be drawn into the
room when the indoor fan is operating and the
ADVANTAGES FOR NEW
door is open.
CONSTRUCTION
N. High Efficiency Condensate Removal System:
Design
Flexibility
the Architect/Engineer
The chassis
shallforhave
a condensate removal
• Whisper-quietofperformance,
indoors
and out
system
consisting
a slinger ring
integrated
in
the
fan,
to disperse
• outdoor
No bulky
duct
system condensate onto the
condenser
coil to be
evaporated.
• No separate
equipment
room
O. Accessories:
• No water towers or additional cooling
1. Hardwire
kit (PN: HARDWIRE-KIT-xxA)
equipment
shall
be
required
if an-up
accessory
powerHVAC
cord
• No complex matchof different
is components
not used. The hardwire kit provides a
permanent connection to the unit and shall have
• Less sensitivity to building orientation (sun,
36” (914 mm) of flexible steel conduit and a
wind, shade)
plug-in connector for easy connect/disconnect.
• Optional architectural grille to permit custom
2. Insulated Polymer Wall Sleeve (PN:
exterior appearance
SLEEVE-INSUL-1PK) shall be made from a
Owner
Initial
Cost Savings
for the
Building
molded
polymer,
with
factory
installed
• insulation
No expensive
component
HVAC system
and a minimum
flammability
rating
of purchase
UL94-5V. The sleeve surface shall be
to prevent shine
and hide
• textured
No equipment
room
or scratches.
maintenance
3. Deep
Wall Metal
engineering
staff Wall Sleeve (up to 28” /
mm.)
SLEEVE-1PK)onshall
• 711.2
Two-part (PN:
delivery
to -EXTxxminimize
-site
be damage
a one-- piece, extended wall sleeve, with
factory installed insulation and deep wall
• Weather--protected wall sleeve that goes in
baffles integrated.
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
N
T
(E
ar
in
in
fr
A
C
D
In
3.0
DELIVERY, STORAGE, AND
APPLICATIONS
HANDLING
Whether you are designing a new structure
Lower Operating Costs and Reliable Comfort
W
re
an
ne
for The Occupant
Chassis
shall be capable of withstanding
temperatures
from models
--40˚ F offer
to 155
˚ F (--40savings
˚ C to
• Heat pump
substantial
68.3˚ C),over
at 5 models
to 95 percent
non--condensing,
with RH,
conventional
electric
during shipment
and storage, without component
resistance heaters
failure.
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• Rapid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
NEW CONSTRUCTION
RETROFIT/REPLACEMENT
The Gree E-TAC Packaged Terminal Air Conditioning
NOTES:
If you are replacing a unit in an existing wall sleeve,
(E-TAC) unit is designed to meet the needs of the
________________________________________________________________________________________
your options include:
architect, engineer, and contractor. For unit
• Replace the existing wall sleeve with the
installation, Gree’s expert support network will assist
________________________________________________________________________________________
the polymer wall sleeve. See accessory sleeve
in all applicable aspects of the construction project,
section for selecting the correct sleeve for
from preparing a budget to start-up.
your application.
________________________________________________________________________________________
ADVANTAGES FOR NEW
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
CONSTRUCTION
________________________________________________________________________________________
replaced.
Design Flexibility for the Architect/Engineer
• Use an existing sleeve and exterior grille. The
• Whisper--quiet performance, indoors and out
________________________________________________________________________________________
Gree E-TAC will fit into:
• No bulky duct system
— The following major competitors’ wall
• No separate equipment room
________________________________________________________________________________________
sleeves/grilles: Carrier, GE, Amana,
• No water towers or additional cooling
Trane, Friedrich and Bryant, and NO
equipment
accessory retrofit kit is required.
________________________________________________________________________________________
• No complex match--up of different HVAC
— Friedrich T series and ZoneAire wall
components
sleeves, with a required wall sleeve
________________________________________________________________________________________
• Less sensitivity to building orientation (sun,
extension (see accessory Friedrich
wind, shade)
Retrofit Wall Sleeve Adapter).
________________________________________________________________________________________
• Optional architectural grille to permit custom
exterior appearance
________________________________________________________________________________________
Initial Cost Savings for the Building Owner
• No expensive component HVAC system
________________________________________________________________________________________
purchase
• No equipment room or maintenance
________________________________________________________________________________________
engineering staff
• Two--part delivery to minimize on--site
damage
________________________________________________________________________________________
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
Printed in U.S.A.
Edition Date: 11/11
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
44 46
4
Catalog No. PTAC-GB-1PD
E-TAC
GA
E-TAC
or
The
packaging
of the
chassis
be sufficient
to
replacing
packaged
terminal
airshall
conditioning
units in
protect
the chassis
fromGree
damage
during
via
an existing
building,
E-TAC
willshipment
meet your
an
enclosed
truck.
Chassis
must
also
be
able
to
needs.
withstand an impact force of 8 g’s and a random
• Hotels
andofmotels
continuous
force
1g, during shipping.
•
Nursing
homes
assisted
Chassis, wall sleeves, and and
grilles
shall beliving
shippedcare
in
centers
separate cartons. Universal handling instructions
Offices and visible on the carton, from front,
shall• be defined
back• andApartments
sides.
• Single--family dwellings
• Home conversions and residential add--ons
Copyright 2011 Gree Electric Appliance Inc.
A
N
T
(E
ar
in
in
fr
A
C
D
In
A
GA
NOTES:
________________________________________________________________________________________
W
re
an
ne
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
3.0 DELIVERY, STORAGE, AND
HANDLING
________________________________________________________________________________________
Chassis shall be capable of withstanding
The packaging of the chassis shall be sufficient to
temperatures from --40˚ F to 155˚ F (--40˚ C to
protect the chassis from damage during shipment via
________________________________________________________________________________________
68.3˚ C), at 5 to 95 percent RH, non--condensing,
an enclosed truck. Chassis must also be able to
during shipment and storage, without component
withstand an impact force of 8 g’s and a random
failure.
continuous force of 1g, during shipping.
________________________________________________________________________________________
Chassis, wall sleeves, and grilles shall be shipped in
separate cartons. Universal handling instructions
________________________________________________________________________________________
shall be defined and visible on the carton, from front,
back and sides.
________________________________________________________________________________________
E-TAC
________________________________________________________________________________________
N
T
(E
ar
in
in
fr
A
C
D
________________________________________________________________________________________
________________________________________________________________________________________
GA
NOTES:
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Copyright 2011 Gree Electric Appliance Inc.
Printed in U.S.A.
Edition Date: 11/11
Catalog No. PTAC-GB-1PD
________________________________________________________________________________________
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
________________________________________________________________________________________
46
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
45
In
3.0 DELIVERY, STORAGE, AND
HANDLING
The packaging of the chassis shall be sufficient to
protect the chassis from damage during shipment via
an enclosed truck. Chassis must also be able to
withstand an impact force of 8 g’s and a random
continuous force of 1g, during shipping.
Chassis, wall sleeves, and grilles shall be shipped in
separate cartons. Universal handling instructions
shall be defined and visible on the carton, from front,
back and sides.
Chassis shall be capable of withstanding
temperatures from --40˚ F to 155˚ F (--40˚ C to
68.3˚ C), at 5 to 95 percent RH, non--condensing,
during shipment and storage, without component
failure.
GA
NOTES:
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Copyright 2011 Gree Electric Appliance Inc.
Printed in U.S.A.
Edition Date: 11/11
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
46
Catalog No. PTAC-GB-1PD