Download MTD E645E Operator`s manual

SECTION 2: CONTENTS OF HARDWARE PACK
Lay out the hardware according to the illustration for identification purposes. Part numbers are shown in parentheses. (Hardware pack may contain extra items which are not used on your unit.)
A
B
ATTACHING THE HANDLES
(2) Hex Bolts
5/16-18 x 1-3/4” Long
(710-3180)
ATTACHING THE HANDLE PANEL
(4) Carriage Bolts
5/16-18 x 1-1/2” Long
(710-0262)
(2) Hex Bolts
5/16-18 x 3/4” Long
(710-3008)
(4) Hex Nuts
5/16” Thread
(712-3010)
(2) Handle Tabs
(784-5599)
(4) Lock Washers
5/16” I.D.
(736-0119)
C
ATTACHING THE SPEED SELECTOR PLATE
AND SHIFT LEVER
(4) Self-Tapping
Screws
1/4-20 x 1/2” Lg.
(710-0599)
D
(2) “Z” Fitting
(746-0778)
(2) Hex Lock Nuts
1/4” Thread
(712-3027)
E
ATTACHING THE CHUTE ASSEMBLY
ATTACHING THE CHUTE DIRECTIONAL
CONTROL ASSEMBLY
(2) Flat Washers
3/8” I.D. x 5/8” O.D.
(736-0185)
(1) Hair Pin Clip
(714-0104)
(2)Hex Nut
5/16” Thread
(712-3010)
(1) Cupped Washer
5/16” I.D.
(736-0242)
G
ATTACHING THE CLUTCH CABLES
(2) Hex Nuts
#10-24 Thread
(712-0121)
(2) Hex Bolts
1/4-20 x 3/4” lg.
(710-3015)
F
(4) Lock Washers
5/16” I.D.
(736-0119)
(6) Hex Bolts
1/4-20 x 3/4” Lg.
(710-3015)
AUGER SHEAR BOLTS (SPARES)
(2) Hex Lock Nuts
5/16” Thread
(712-0429)
(2) Shear Bolts
(710-0890A)
5
(6) Hex Lock Nuts
1/4” Thread
(712-3027)
(3) Chute Flange Keepers
(Not Shown) (731-0851)