Download Vizio E400-B2 Operating instructions

2
3
Align the neck with the base and snap it into
place.
Align the neck piece with the slot in the bottom of
the TV and slide it into place as shown.
Using a Phillips screwdriver, insert
three (3) M4 x 14mm screws into holes on
the bottom of the base and tighten them to
secure it to the neck.
Using a Phillips screwdriver, insert four (4)
M4 x 14mm screws into the holes on the back of the
TV and tighten them to secure the neck to the TV.
When you are finished, place the TV on a stable,
level surface.