Download Vivotek VC8201 User`s manual

VIVOTEK
7.32 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product. (capability.eptz > 0)
PARAMETER
VALUE
Default
SECURITY
DESCRIPTION
(get/set)
osdzoom
<boolean>
1
1/4
Indicates multiple of zoom in is
“on-screen display” or not
smooth
<boolean>
1
1/4
Enable the ePTZ "move smoothly"
feature
tiltspeed
-5 ~ 5
0
1/7
Tilt speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
panspeed
-5 ~ 5
0
1/7
Pan speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
zoomspeed
-5 ~ 5
0
1/7
Zoom speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
autospeed
1~5
1
1/7
Auto pan/patrol speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
panoramicspeed
1~5
1
1/4
Panoramic speed.
It’s only used in Vivotek plug-in.
rotatespeed
1~5
1
1/4
Rotate speed
It’s only used in Vivotek plug-in.
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which support
ePTZ. (capability.eptz > 0)
PARAMETER
VALUE
Default
SECURITY
DESCRIPTION
(get/set)
patrolseq
string[120]
<blank>
1/4
The patrol sequence of ePTZ. All
the patrol position indexes will be
separated by ","
patroldwelling
string[160]
<blank>
1/4
The dwelling time (unit: second)
of each patrol point, separated by
“,”.
preset_i<0~19>_name
string[40]
<blank>
1/7
Name of ePTZ preset.
(It should be set by ePreset.cgi
rather than by setparam.cgi.)
User's Manual - 181