Download Simrad MX525A Specifications

MX525A Programming Cable
Secure cable with tie-wrap
MX525A
TD(A)
TD(B)
RD(A)
RD(B)
GND
+12V
RS422-RS232
Converter
12 VDC
MX525A Programming cable diagram
20 | Installation
B&B Electronics
RS422-RS232
Converter
Model 422LP9TB
PC
COM1
RS232
RS422
BRN
BLU
GRN
ORG
10-pin Male Connector
BLK
RED
3 meters
NEG
+12-32 VDC
The programming cable is used for upgrading the
software of the GPS and Beacon PCBs inside the MX525A
Console. The diagram below shows the programming
cable diagram and equipment setup. Please note that
external 12 volt DC is required to power up the MX525A.
Connect the red wire to +12 VDC and Black wire to
negative GND. The RS422-RS232 converter may be
powered from the PC serial port or from an external 12
volt power supply.