Download Red Hat NETSCAPE DIRECTORY SERVER 6.02 - DEPLOYMENT Installation guide

Using Secure Sockets Layer (SSL) with an Agent
4.
To verify that the certificate is properly installed, at the command line, enter
the following:
\Agent_Install_Dir\bin\certutil -L -d cert-dir
You should see the root CA certificate added and listed in the output of the
command. See Table 3-3 on page 87 for an example of output after running the
certutil -L command.
5.
Restart IIS.
Installing the Root CA Certificate on Apache 2.0.50
1.
Go to the following directory: What is the directory for Apache 2.0.50? I’ve just
started it below?
\Agent_Install_Dir\apache\cert
2.
Add the same root CA certificate that is installed on the web server that runs
Sun ONE Identity Server into the existing certificate database. At the command
line, enter the following command:
\Agent_Install_Dir\bin\certutil -A -n cert-name -t "C,C,C" -d cert-dir -i cert-file
where:
❍
❍
cert-name can be any name for this root CA certificate.
cert-dir is the directory where the certificate and key stores are located. The
location is:
Agent_Install_Dir\apache\cert
❍
cert-file is the base-64 encoded root CA certificate file.
For more information on the certutil utility, see the online help by entering
the following command:
certutil -H
3.
To verify that the root CA certificate was installed properly in the certificate
database, enter the following command:
Agent_Install_Dir\bin\certutil -L -d cert-dir -i cert-file
You should see the root CA certificate added and listed in the output of the
command. See Table 3-3 on page 87 for an example of output after running the
certutil -L command.
4.
Restart Apache 2.0.50 Server
Chapter 3
Policy Agents on Microsoft Windows
89