Download Sharp DV-SL80X Service manual
Transcript
AV CBA Bottom View CAUTION ! Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit. If Main Fuse (F1001) is blown, check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail. WF3 WF2 WF1 C1402 PIN 10 OF PIN 8 OF PLUS LEAD CN1601 CN1601 1-10-23 CAUTION FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE SAME TYPE FUSE. NOTE : The voltage for parts in hot circuit is measured using hot GND as a common terminal. WF6 WF4 WF5 PIN 14 OF PIN 16 OF PIN 19 OF CN1601 CN1601 CN1601 1-10-24 BE5942F01011A