Download HLG-320H series
Transcript
HLG-320H 320 W Single Output Switching Power Supply s e r i es ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ IP65 IP67 SPECIFICATION HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-48 HLG-320H-54 12V 15V 20V 24V 30V 36V 42V 48V 54 V CONSTANT CURRENT REGION Note.4 6 ~12V RATED CURRENT 22A 7.5 ~ 15V 19A 10 ~ 20V 15A 12 ~ 24V 13.34A 15 ~ 30V 10.7A 18 ~ 36V 8.9A 21 ~ 42V 7.65A 24 ~ 48V 6.7A 27 ~ 54V 5.95A RATED POWER 285W 300W 320.16W 321W 320.4W 321.3W 321.6W 32 1.3W 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 35 0mVp-p 38 ~ 45V 43 ~ 52V 49 ~ 58V MODEL DC VOLTAGE 264W RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT 32 ~ 39V VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 21 ~ 26V 26 ~ 32V Can be adjusted by internal potentiometer A type and C type only CURRENT ADJ. RANGE 11 ~ 22A 9.5 ~ 19A 7.5 ~ 15A 6.67 ~ 13.34A 5.35 ~ 10.7A 4.45 ~ 8.9A ±1.0% ±2.0% ±1.5% ±1.0% ±1.0% VOLTAGE TOLERA NCE Note.3 ±3.0% ±0.5% LINE REGULATION LOAD REGULATION SETUP, RISE TIME ±0.5% HOLD UP TIME (Typ.) 15ms at full load 3.35 ~ 6.7A 2.97 ~ 5.95A ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±1.0% ±0.5% 230VAC /115 VAC ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±2.0% ±1.5% Note .8 2500ms, 80ms at full load 3.8 ~ 7.65A ±1.0% 230VAC /115VAC Note.5 90 ~ 305VAC VOLTAGE RANGE 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz PF>0.98/115VAC, PF>0.95 /230VAC, PF>0.94/27 7VAC at full load (Please refer to "Power Factor Characteristic" curve) POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) (230Vac) AC CURRENT (Typ.) INRUSH CURRENT( Typ .) 94% 94% 94.5% 94.5% 3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC COLD START 70A(t width=1010μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC EFFICIENCY (Typ.) (277Vac) OVER CURRENT Note.4 SHORT CIRCUIT PROTECTION OVER VOLTAGE 95% 95% 95 % 95% 95% 95% 95 % 53 .5 ~ 60 V 59 ~ 65V 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 33 ~ 37V 14 ~ 17V 17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V 40 ~ 46V 46.5 ~ 53V Protection type : Shut down and latch off o/p voltage, re-power on to re cover -40 ~ +70℃ (Refer to "Dera ting Curve") 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃ ) 10 ~ 500Hz, 5G 12min./1cycle, pe riod for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent (except for HLG-320H C type),IP65 or IP67, J61347-1, J61347-2-13 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATIO N RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF NOTE 94.5% 94% WORKING TEMP. SAFETY STANDARDS Note.7 OTHERS 93.5% 93% 100℃±10℃ (RTH2) Protection type : Shut down and latch off o/p voltage, re-power on to re cover VIBRATION EMC 92.5% 91.5% OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT SAFETY & 91% I/P-FG:2KVAC O/P-FG :0.5KVAC Compliance to EN61000-4- 2,3,4,5,6,8,11, EN615 47, EN55024, light industry level (surge 4KV), criteria B DIMENSION 157.1K hrs min. MIL-HDBK-217 F (25℃ ) 252*90*43.8mm (L*W*H) PACKING 1.88Kg ; 8pcs/16Kg/0.92CUFT ℃ HLG-320H 320W Single Output Switching Power Supply Mechanical Specification Case No.202A s e r ie s Unit:mm Bl ank:(HLG- 320H) 252 225.2 13.4 8 .9 300± 20 FG (Green/Yellow) A C/L( Brown) A C/N(Blu e) 300± 20 112.6 T case SJTW 18AWG× 3C S JTW 14AWG× 2C + V( Red) -V(Bla ck) ψ4.5×4PL ※ T case: Max. Case Temperature. ※ I P67 rated. Cable for I/O connection. A Type:(HLG-320H-_A) 252 225.2 13.4 8 .9 300± 20 FG (Green/Yellow) A C/L( Brown) A C/N(Blu e) 300± 20 T case 112.6 Io Vo ADJ . ADJ. SJTW 18AWG× 3C S JTW 14AWG× 2C + V( Red) -V(Bla ck) ψ4.5×4PL ※ T case: Max. Case Temperature. ※ IP65 rated. Output voltage and constant current level can be adjusted thr ough internal potentiometer. (Can access by removing the rubber st opper on the case.) File Name:HLG-320H-SPEC 2013-04-22 HLG-320H 320W Single Output Switching Power Supply s e r ie s B Type:(HLG-320H-_B) 252 225.2 13.4 8 .9 300± 20 300± 20 FG (Green/Yellow) A C/L( Brown) A C/N(Blu e) 112.6 T case S JTW 18AWG× 2C SJTW 18AWG× 3C S JTW 14AWG× 2C ψ4.5×4PL D IM+ (Blue) DI M-(White) +V( Red) -V(Black) ※ T case: Max. Case Temperature. C Type:(HLG-320H-_C) 252 225.2 13.4 8.9 1 I/P 2 1 112.6 T case O/P 2 3 Io Vo AD J. ADJ. ψ4.5×4PL ψ4.5×4PL 7.5 237 ※ T case : Max. Ca se Tempe ra ture. ※ Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber st opper on the case.) A C Input Terminal Pin No. Assignment P in No. 1 2 3 Assignment FG AC/L AC/N DC Outp ut Terminal Pin No. As signme nt Pin No. 1 2 Assignm ent +V -V File Name:HLG-320H-SPEC 2013-04-22 HLG-320H 320W Single Output Switching Power Supply s e r ie s D Type(opt ion) :(HLG-320H-_D) 252 225.2 13.4 8 .9 300± 20 A C/L(Br own) A C/N(Blu e) FG (G re en/Yell ow) 300± 20 + V( Red) -V(Bla ck) 112.6 T case SJTW 18AWG× 3C S JTW 14AWG× 2C ψ4.5×4PL ※ T case: Max. Case Temperature. ※ IP 67 rated. Timer dimming function, contac t MEAN WELL for details. Block Diagram Fosc : 65KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWIT CHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. DE TECTION CIRCUIT P WM & PFC CONTROL PFC CONTROL O.V.P. Derating Curve Static Characteristics 230VAC 100 100 90 80 80 60 70 110VAC 60 40 50 20 -40 40 -25 -10 0 15 30 50 AMBIENT TEMPERATURE (℃) 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz File Name:HLG-320H-SPEC 2013-04-22 320W Single Output Switching Power Supply HLG-320H s e r ie s Power Factor Characteristic Constant Current Mode 1 0.98 0.96 0.94 0.92 0.9 0.88 277V AC 230V AC 115V AC 0.86 0.84 50% 60% 70% 80% 90% 100% (320W) LOAD EFFICIENCY vs LOAD (48V Model) HLG-320H s eries possess superior wor king efficiency that up to 95% can be reached in fi el d applications . 97 95 93 91 89 87 27 7V AC 85 23 0V AC 83 11 5V AC 81 79 77 75 10% 2 0% 30 % 40 % 50% 6 0% 7 0% 80 % 90 % 1 0 0 % LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direc t dri ve" and "with LED driver". A typical LED power supply may e ither work in "const ant v oltage mode (CV) or consta nt cur rent mode ( CC)" t o drive t he LEDs. Mean Well's LED power supply wi th CV+ CC characteristic can be operated at both CV mode (with LED driv er, at area (A) and CC mode (direct drive, at area (B). (B) Constant Current area 100 (A) Constant Voltage area 50 (C) Hiccup Protection 50 95 Io (%) Typical LED power supply I-V curve File Name:HLG-320H-SPEC 2013-04-22 HLG-320H 320W Single Output Switching Power Supply s e r ie s DIMMING OPERATION (for B-type only) D IM+ (Blue) DI M-(White) FG (Green/Yellow) A C/L( Brown) A C/N(Blu e) +V( Red) -V(Black) HLG-320H ※ Built -i n 3 in 1 dimming func tion, IP67 rated. Outpu t constant current lev el can be adjusted through out put cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM si gnal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V ". ※ Reference resistance value for output curr ent adjustment (Typical) Single driver 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ Resistance Mult iple dr ivers value (N=driver quantity for s ynchronized 10KΩ/N 20K Ω/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N OPEN ---- - dimming operat io n) Percentage of rated current ※ ※ 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% 1 ~ 10V dimm ing functi on for o utpu t current adjustm ent (Typical ) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% 10V PWM si gnal for ou tput cur rent adj ustmen t (Typical): Frequency range :100HZ ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※Using the built-in dimming function on B- type model can't t ur n t he lighting f ixture tot ally dark. Please refer t o the connect ion method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. ※Direct connecting to LEDs is suggested, but is not suitable for using additional dr ivers. Dimming connecti on diagram for turni ng the l ighting fixt ur e ON/OFF : N FG L Switch Relay Adjuster 0~100K Ohms r esistance 1~10V DC Voltage 10V P WM Signal Green/ Yellow Brown Blue AC/L HLG-320H B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/ OF F the lighting fixt ur e. 1.Output constant cur rent level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-320H-SPEC 2013-04-22 HLG-320H 320W Single Output Switching Power Supply s e r ie s WATERPROOF CONNECTION ◎ Waterproof connector Waterproof connector can be assembled on t he output cable of HLG-320H t o operate in dry/wet/damp or outdoor environment. AC sour ce HLG-320H I /P Size Pin Confi gurati on ( Femal e) M12 Order No . Suitable Current 4-PI N 5A/P IN M12-04 10A max. 5 -PIN 5A/PI N M12-0 5 10A max . O/ P Si ze Pin Configuration (Female) M 15 2-PI N 12A/P IN M15-02 12A max. Order No . Suitable Current LED Lamp ◎ Cable Joiner 66 26 CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-320H O/P W ires ※CJ04 cable joiner can be purchased independently for user's own assembly. MEA N WELL or der No. : CJ 04-1, CJ04-2. ◎ Ju ncti on Box( Op tion ) 225.2 387.2 76 10 5 FG (G reen /Yell ow ) A C/L(Br own) A C/N(Blu e) +V(Red) -V(Black) SJTW 18AWG× 3C SJTW 14AW G×2C 2-ψ5 3- PF 1/2" 150± 20 ※Optional junction box available for A / Blank - type, please contact MEAW WELL for details. 3- PF 1/2" 150±20 86 File Name:HLG-320H-SPEC 2013-04-22