Download User Manual - ATO FORM GmbH
Transcript
User Manual Tilting table and standing frame Standing aids edition 01/12 Foreword Dear Customer! We would like to thank you for your trust extended to us and for purchasing our product. The tilting table/standing frame NOVUM distinguishes itself by its quality, security, easy operation and modern design. For optimal use of this aid, we ask you and possible other users to carefully read this operating manual. Please read through these instructions carefully, before first use and handle equipment appropriately. Page 3 Index Subject������������ Page Foreword……………………………………3 Index…………………………………………4 Safety guidelines ……………………………5 Important Warning…………………… 5–7 Warranty and product liability………………8 Purpose of use………………………………8 Position of CE-sign…………………………8 Multi-adjustable discus element……………8 Device overview……………………………9 Delivery…………………………………… 10 Belts and foot support…………………… 10 Assembly of Extension cushion (Accessories)……………………………… 12 Assembly of table (Accessories)………… 13 Knee supports for use in supine position (Accessories)………… 14 Technical data…………………………… 15 Spare parts………………………………… 15 Types/Accessories…………………… 16/17 Cleansing………………………………… 18 Maintenance……………………………… 18 Storage…………………………………… 18 Re-use……………………………………… 18 Page 4 Safety goidelines Important Warnings Safety guidelines The tilting table/standing frame NOVUM is labelled with the CE mark and complies with the requirements of Directive 93/42/EWG. It was developed in accordance to the newest insights. The manufacturing process is subject to constant quality control. The maximum load of the tilting table/ standing frame NOVUM, depending on model lies between 50/70/100 kg. Regular monitoring at your specialist dealer (at least once a year) lengthens the life time of the tilting table/ standing frame NOVUM and gives you security. Important Warnings When using a tilting table/standing frame the centre of gravity is always relatively high up. A person using a tilting table/ standing frame is always dependent on the stability of the device, from the supporting points against the body and support area to the floor. Our main objective was to develop a device, which satisfies the demands of many medical indications. Nevertheless, a tilting table/standing frame cannot be used without exception in all situations. The application and utilization should always be followed through with sense and reason. • Before using the tilting table/standing frame NOVUM, carefully read all instructions of this user manual, as these have been drawn up for your safety and as a guideline for the correct use and care of this product. This operating manual is an indispensable component of the delivery and should be stored carefully for further use. • The operating manual is intended for retailers and users of the tilting table/ standing frame NOVUM, it contains the required information to secure the correct use of the product, cannot not however, replace the necessary experience of the user or assistant in handling the device. Page 5 Important Warnings • The reseller has the duty to deliver the device ready for operation and to explain precisely the functions and technical data of the device, as well as the necessary support and briefing needed for a correct and efficient use of the device. • The given instructions of the operating manual refer to the point in time of the device being placed on the market. The manufacturer reserves the right to introduce any modifications that prove necessary to the device and associated operating manual, without being bound to change previous devices and associated operating manuals. • The tilting table/standing frame NOVUM may only be operated with continues presence of a qualified person, respectively a family member of the user. • The NOVUM may only be used by persons of a suitable stature and physical aptitude. • The NOVUM is only intended for use inside buildings. • The NOVUM may only be operated by persons who have familiarized themselves with the standards and rules of the present operating manual. • Never place a patient in a standing aid, which is not coordinated with his or hers body height and weight. • Do not place any hot containers or objects on the therapy table, as hereby the wood or coating could be seriously damaged. Page 6 • Do not place any heavy objects on the standing aid (for example on the table), as it would affect the centre of gravity and consequently impair the balance. • Do not operate or take any action if unsure of its effects; if in doubt please contact the nearest technical service centre or manufacturer. • Always ensure there are no obstacles in operating range of the NOVUM, such as carpets, stairs or objects on the floor, which could lead to the NOVUM overturning. • Move all objects out of the way, which could be hit or fall whilst operating the tilting table/standing frame NOVUM. • The use of the tilting table/standing frame NOVUM and its auxiliary equipment, must be administered under medical supervision. • Never use the NOVUM on rough terrain, steeply sloping ground or stairs. • Never leave the user of the NOVUM unattended with the device. • Do not use the NOVUM before locking the wheels of the standing aid, • Do not use the tilting table/standing frame NOVUM without ensuring a correct mounting of the safety belts. • Never place the tilting table/standing frame NOVUM on steep grades. • Do not use the device if any parts are damaged or missing. Important Warnings • In case of malfunction or accident contact the reseller from whom you purchased the device from. Control before every use, that all adjustable parts are always locked. • Check regularly if all screws and handles etc. are tightly fastened. Worn and defect parts are to be repaired or replaced immediately. This is especially important to ensure a safe use of the aid! Carefully check for a firm hold of the clamping jigs and the like. • Adjust settings only in the unladed condition. • The manufacturer bears no responsibility for damages caused to persons, objects or animals in the following cases: – Incorrect use of the aid – Use of the device by non-suitable persons – Incorrect mounting of parts or accessories – Use of non-original spare parts – None-observance of the given instructions in this operating manual – Exceptional events • Clean the tilting table/standing frame NOVUM in accordance with the instructions in the chapter „Cleansing” (p.18) • Be careful when moving the standing aid, whilst a patient is standing in the device. This is particularly applicable when crossing ramps, thresholds and similar. Never allow persons not familiar to operate the standing aid respectively those who have not read this operating manual. • Always demand original spare parts. • In case of an accident contact the manufacturer for a speedy investigation. • The manufacturer can accept no responsibility for damages, caused by unsuitable and incorrect application of the device by the user, neglected maintenance, unauthorized alterations and modifications, the use of nonoriginal spare parts, unpredictable and exceptional events or from nonobservance of the instructions of this operating manual. We constantly develop new aids and improve existing products. We will be happy to receive your suggestions of any description. Page 7 Warranty and Product Liability Pupose of use • Multi adjustable discus element Warranty and Product Liability ATO FORM grants the required by law warranty of your country against defects in workmanship and materials. The warranty would be adversely affected if the customer’s responsibility of servicing and/or daily maintenance is not carried out according to the guidelines and intervals prescribed by the supplier and/ or stated in the manual. For further information, we refer to the ATO FORM homepage/download www. ato-form.com. The warranty can only be sustained if the ATO FORM product is in use in the same country where it was purchased and if the product can be identified by the serial number. The warranty does not cover accidental damage, including damage caused by misuse or neglect. The warranty does not extend to nondurable parts, which are subject to normal wear and tear and need periodic replacement. The warranty is null and void if non-original ATO FORM parts/accessories are used, or if the product is repaired or altered by anyone other than an authorized ATO FORM representative or by trained personnel officially recognized by ATO FORM for repair and maintenance of ATO FORM products. ATO FORM reserves the right to inspect the product being claimed for and the relevant documentation before agreeing to the warranty claim, and to decide upon whether to replace or repair the defective product. It Page 8 is the customer’s responsibility to return the item being claimed for under warranty to the address of purchase. The warranty is given by ATO FORM or, subsequently, an ATO FORM dealer. Purpose of use The tilting table/standing frame NOVUM is only intended for indoor use. It offers a variety of therapeutic applications such as, standing frame, prone board, tilting table or as drainage support. The optional therapy table supports the head control training optimal. We wish you every success using the tilting table/ standing frame NOVUM. Position of the CE-sign The CE-label is located on the underframe. Multi-adjustable discus element To achieve greatest possible variability, multi-adjustable discus elements were inserted to the tilting table/standing frame NOVUM. Using these, height, depth, tilt and angle are adjustable. IMPORTANT: When affixing the multi-adjustable discus elements vertically, viewed from the front, the head of the Allen screw must always face to the left. When affixing horizontal (knee supports), the head of the Allen screw must always face upwards. Device overview Device overview A Upper support pad F Swivel wheels, with brakes B Extension Cushion (narrow/high) G CE label C Main support pad HFrame D Multi-adjustable discus element I Tilt control mechanism via electro motor E Split foot plates A B C I D G E H F Page 9 Delivery Belts and foot support Delivery Every tilting table/standing frame NOVUM is delivered in a stable carton. After unpacking it is operational immediately. Belts and foot support The belts are freely guided in the rail and thereby infinitely height adjustable. Height, angle and rotation of the foot supports are set using the multi-adjustable discus element. This permits settings for foot malposition. Page 10 Assembly Extension cushion (Accessories) Assembly Extension cushion (Accessories) The extension cushion (B) is inserted into the intended guides of the main support pad (C). The upper support pad (A) is inserted into the extension cushion. A B Please note when the desired adjustment is reached, tighten the grub screws (D), to avoid unintended disengaging of parts. C D Page 11 Assembly Table (Accessories) Assembly Table (Accessories) The table is inserted into the lateral multiadjustable discus element table receiver. Adjust to the desired depth and fixate the table using the wing screws (E). The integrated catch (F) in the multiadjustable discus element enables rapid adjustment of the table inclination. The height is adjustable using the multiadjustment discus element (G) attached on the back. G E F Page 12 Knee supports for application as a supine position board (Accessories) Knee supports for application as a supine position board (Accessories) D B To mount the knee supports, guide the brackets (B) into the multi-adjustable discus element (A). Adjust the height using the multi-adjustable discus element (A). Push the holder of the knee supports (D) onto the brackets (B) and fasten using the Allen screws (C). Using the quick release (E) the knee supports are variably tilt adjustable. C E Page 13 Technical data Spare parts Technical data Tilting table/standing frame Axle height in cm Undercarriage overall with Size 1 Size 2 Size 3 70 to 101 83 to 121 115 to 153 59 cm 59 cm 70 cm Undercarriage total length 85 cm 85 cm 112 cm Total height 138 cm 153 cm 205 cm Total horizontal height 60 cm 70 cm 76 cm Entry height from 3 cm from 3 cm from 3 cm Standard support pad large (W x H) 31 x 43 cm 36 x 50 cm 45 x 89 cm Standard support pad small (W x H) 25 x 24 cm 32 x 26 cm 36 x 30 cm -5 to 90° -5 to 90° -5 to 90° Loading capacity Tilt 50 kg 50 kg 50 kg Wheels/Castors 75 mm 75 mm 100 mm *incl. all accessories (from foot plates to top edge of the supporting surface) Spare parts Only original accessories and original spare parts may be used. Non-compliance with these instructions and repairs carried out or modifications made to the tilting table/ standing frame NOVUM or its parts by unauthorized persons, voids any warranties. In these cases, any product liability granted by the manufacturer (ATO FORM GmbH, Zur Lauterhecke 34, 63877 Sailauf) voids in advance. For all questions about spare parts and accessories contact your specialist dealer or the ATO FORM- Service +49/6093-944-0. Page 14 Technical changes reserved! In environmental protection matters: All packaging parts are re-useable. The cardboard packaging is to be recycled as waste paper. We therefore use paper as filler material. Possible used plastic film of the packaging are made out of PE and are therefore low in pollutant and can either be recycled or burnt. Page 15 Models, Accessories Basic model NV-1000 Size 1 Basic model Novum NV-1000-E Size 1 Basic model Novum incl. electric motor NV-2000 Size 2 Basic model Novum NV-2000-E Size 2 Basic model Novum incl. electric motor NV-3000-E Size 3 Basic model Novum incl. electric motor Accessories NV-0110 Size 1 Therapy table for prone and supine position NV-0210 Size 2 Therapy table for prone and supine position NV-0310 Size 3 Therapy table for prone and supine position NV-0111 Size 1 Heel support (pair) divided NV-0211 Size 2 Heel support (pair) divided NV-0311 Size 3 Heel support (pair) divided NV-0115 Size 1 Back support NV-0215 Size 2 Back support NV-0315 Size 3 Back support NV-0115M Size 1 Back support, multi-adjustable (pair), orange NV-0215M Size 2 Back support, multi-adjustable (pair), blue NV-0315M Size 3 Back support, multi-adjustable (pair), grey Page 16 Accessories NV-0116 Size 1 Knee support for supine position (pair), black NV-0216 Size 2 Knee support for supine position (pair), black NV-0316 Size 3 Knee support for supine position (pair), black NV-0117 Size 1 Extension cushion, narrow/heigth, orange NV-0118 Size 2 Extension cushion, wide/low, orange NV-0217 Size 3 Extension cushion, narrow/heigth, blue NV-0218 Size 1 Extension cushion, wide/low, blue NV-0317 Size 2 Extension cushion, narrow/heigth, grey NV-0318 Size 3 Extension cushion, wide/low, grey NV-0119 Size 1 Extra belt NV-0219 Size 2 Extra belt NV-0319 Size 3 Extra belt NV-0419 Size 4 Extra belt NV-0120 Size 1 Electric motor additional component NV-0220 Size 2 Electric motor additional component Please see our current product information for further information. Page 17 Cleaning, Maintenance, Storage, Re-use Cleaning Leftovers, dirt and dust are always to be removed. Moving parts operate better, if you apply one drop of acid-free sewing machine oil after cleaning. Belts are best cleaned using water and a mild detergent. The upholstery is made of imitation leather and is washable. When using any cleaning agent please follow instructions of the manufacturer! Maintenance For the protection of the warranty, it is especially important, that the tilting table/standing frame NOVUM is serviced regularly once a year from the date of purchase. Please request the relevant maintenance checklist. Warning Do not use strong solvents, which could damage the surface of the device. The use of a high-pressure cleaner is not recommended. Re-use The product NOVUM was designed so it could be reused after implementation of various measures. Following measures should be followed: • Thorough cleaning and disinfecting using appropriate cleaning agents. • Maintenance, following the maintenance schedule of the manufacturer or authorized specialist dealer. • Preparing accompanying documents and release for re-use. Storage Keep these operating manual in a safe place after reading, so that you can refer to them later. Page 18 Page 19 Selection from our programme: ■ Walking aids ■ Gait trainer ■ Standing aids ■ Seating aids ■ Hoists ■ Body Protection ■ Customized solutions Thank you for your interest in our products. For questions please contact ATO FORM GmbH or your specialist dealer. Your ATO FORM Team Your spezialist dealer ATO FORM GmbH, Zur Lauterhecke 34, D-63877 Sailauf phone +49 (0) 60 93/9 44-0, E-Mail: [email protected] www.ato-form.com