Download User`s Manual - BME Shared Lab Resource

Chapter 8: Modifying Your Freeze Dryer Display
Press MENU and the display will show
HOLD SELECT TO CLEAR
ALL TOTAL HOURS?
If you want to reset Total Hours, press and hold SELECT until an
audible beep is heard. The display will default to the main freeze
dry display information.
If you do not want to set Total Hours, press MENU and the display
will show.
PRODUCTION MENU:
MASTER RESET?
The routine will repeat by pressing MENU or wait approximately
10 seconds for the display to default to the main freeze dry
information display information.
In order to store offsets in memory, you Must Press and Hold
MENU until display shows,
PASSWORD:
Wait approximately 10 seconds and the display will default to the
main freeze dry display information. This can be done anytime
throughout the Modifying the Display routine.
46
Product Service: Domestic 1-800-522-7658, International 816-333-8811