Download PRENOSTOP Tutorial/Reference Manual

A new message has been created which warns a user when calculated and/or imported values will
be lost when the program is closed or File-New is used. This provides a check against
inadvertently losing data results which could otherwise be saved in a file for future use or use by
another program. The existence of unsaved calculated and/or imported values is indicated in the
window caption with an asterisk (*) in the same fashion as changed user entry values. In the case
of PRENOSTOP, the protected values are any imported CYCLES, GREENTIMES,
YELLOWTIMES and/or OFFSETS. A similar message is now issued when File-Open or Reset
[Parameters] is used when edited, calculated and/or imported values have not been saved.
>Edit Window Contents Can Be Printed, Including Line Numbers.
The contents of the TED Edit window, either within TED or the built-in edit window in any
TEAPAC program, can now be printed using the normal print menu or toolbar buttons, including
line numbers.
>Global Entry of Additional Sequence Codes Now Includes All Extra Codes.
The entry of additional sequence codes for intersection 0 (to be assigned to all intersections) has
been expanded so that all extra sequence codes will be assigned to all intersections, not just the
first extra sequence code. This allows added flexibility when using this global entry feature for
SEQUENCES.
>VOLADDITIONALS Values Now Allowed to be Negative.
The entry or computed values for VOLADDITIONALS is now allowed to have negative values,
with a complete input range permitted from -9999 to 9999. This is primarily to afford the
possibility of re-assignments of traffic to result in a net reduction of volume for individual
movements, either by manual entry or computations from SITE. In the case of SITE, this also
means that ROUNDing of results can create small negative VOLADDITIONALS in locations
that receive little or no new traffic and where final volumes are rounded down (this is appropriate
and to be expected).
>LinkTo followed by Another LinkTo Performs Properly.
Multiple LinkTo operations can now be performed smoothly under all conditions without
limitation. Previously it was observed that under certain conditions, one LinkTo followed by
another LinkTo could cause certain problems successfully connecting to the next desired
program.
>Better Graphics for Phasing Display and Bitmap Buttons.
The arrows used to represent phasing in various dialogs have been improved in quality and
appearance, and if timings for phasings are defined by-movement instead of by-phase, the by-
PRENOSTOP
H-249
Reference