1
Download bits pot yellow User..
Transcript
AN07-00200-03E The registers used for entire LIN communication control on the microcontroller are as described in “Figure 5-8 Entire LIN communication control registers”. Registers named “res” cannot be used as they are reserved bits. The description of each register, and the setting values in the sample programs, are described in “Table 5-1 Description of the entire LIN communication control registers and setting values”. For more information of the registers, refer to the microcontroller hardware manual. LIN-UART serial control register SCR bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 PEN P SBL CL AD CRE RXE TXE LIN-UART serial mode register SMR bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 MD1 MD0 OTO EXT REST UPCL SCKE SOE LIN-UART serial status register SSR bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 PE ORE FRE RDRF TDRE BDS RIE TIE bit4 bit3 bit2 bit1 bit0 LIN-UART data receiving register / data send register bit7 bit6 bit5 RDR/TDR LIN-UART expanded status control register ESCR bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 LBIE LBD LBL1 LBL0 SOPE SIOP CCO SCES LIN-UART expanded communications control register ECCR bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 res LBR MS SCDE SSM res RBI TBI bit4 bit3 bit2 bit1 bit0 bit4 bit3 bit2 bit1 bit0 LIN-UART baud rate generator register 1 bit7 BGR1 bit6 bit5 ‐ LIN-UART baud rate generator register 0 bit7 bit6 bit5 BGR0 Figure 5-8 Entire LIN communication control registers 89
