Download Z8 Encore! XP F083A Series Development Kit
Transcript
Z8F083A0128ZCOG Z8 Encore!® F083A Series Development Kit User Manual UM020604-0508 Copyright ©2008 by Zilog®, Inc. All rights reserved. www.zilog.com Z8 Encore!® F083A Series Development Kit User Manual ii Revision History Each instance in Revision History reflects a change to this document from its previous revision. For more details, refer to the corresponding pages and appropriate links in the table below. Date Revision Level Description Page No May 2008 04 Updated Introduction section. 1 March 2008 03 Modified Table 2 in Schematics to incorporate changes to R15 from 220 Ohm to 0 Ohm. Added Note 3 to the Schematics. 8, 9 December 02 2007 Updated Zilog logo, Zilog text, Disclaimer All section, and implemented style guide. Removed XP from Z8 Encore! XP F0830/ F083A. July 2006 Original issue. UM020604-0508 01 All Revision History Z8 Encore!® F083A Series Development Kit User Manual iii Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Z8 Encore!® F083A Series Development Board . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Interface Headers JP1 and JP2 . . . . . . . . . . . . . . . . . . . . . 4 4 5 6 6 6 Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 UM020604-0508 Table of Contents Z8 Encore!® F083A Series Development Kit User Manual 1 Introduction Zilog’s Z8 Encore!® F083A Series MCU is part of the line of Zilog® microcontroller products. The Z8 Encore! F083A Series MCU Development Kit (Z8F083A0128ZCOG) enables you to become familiar with the hardware and software tools available with this product. This kit consists of the 8 KB version of the Z8 Encore! development board that supports and presents the features of the Z8 Encore! F083A Series. This kit allows you to write application software and contains all the supporting documents. The Z8 Encore! F083A Series devices support up to 8 KB Flash Program Memory and 256 B register RAM that is pin-for-pin compatible with the award-winning Z8 Encore! XP F0822 Series Flash Microcontrollers family. The Z8 Encore! F083A Series device features up to eight channels of fast analog-to-digital conversion (2.15 µs). The ADC on the Z8 Encore! F083A is one of the fastest 10-bit ADCs available in a 28-pin or smaller package. The Z8 Encore! F083A is built for speed to handle rigorous application requirements for motor control, sensor interfacing, ballast control, and appliance controls. The single-pin debugger and programming interface simplifies code development and allows easy in-circuit programming. This user manual acquaints you with the Z8 Encore! F083A Series MCU Development Kit, and gives instructions on setting up and using the tools to start building designs and applications. Z8F083ASJ020 is the silicon used in the board. For more information, refer to Z8 Encore!® F083A Series Product Specification (PS0263). UM020604-0508 Introduction Z8 Encore!® F083A Series Development Kit User Manual 2 Kit Contents For information on kit contents, refer to Z8 Encore! XP®/Z8 Encore!® (F0822, F082A, F1680, and F083A Series) Development Kits Quick Start Guide (QS0043). UM020604-0508 Introduction Z8 Encore!® F083A Series Development Kit User Manual 3 Installation For software installation and setup of the Z8 Encore!® F083A Series Development Kit, refer to Z8 Encore! XP®/Z8 Encore!® (F0822, F082A, F1680, and F083A Series) Development Kits Quick Start Guide (QS0043). UM020604-0508 Installation Z8 Encore!® F083A Series Development Kit User Manual 4 Z8 Encore!® F083A Series Development Board Introduction The Z8 Encore!® F083A Series Development Board is a development and prototyping board for the Z8 Encore! F083A Series MCU. The board provides a tool to evaluate features of Z8 Encore! F083A Series MCU, and to start developing an application before building the hardware. Figure 1. Z8 Encore!® F083A Series Development Board (see Schematic on page 7 for details on components not installed on this board) UM020604-0508 Z8 Encore!® F083A Series Z8 Encore!® F083A Series Development Kit User Manual 5 Features The key features of Z8 Encore! F083A Series include: • • • • • • • • 20 MHz eZ8 CPU • • • • • • • • • • • Watchdog Timer (WDT) with dedicated internal RC oscillator UM020604-0508 Up to 8 KB Flash memory with in-circuit programming capability Up to 256 B register RAM 100 B non-volatile data storage (NVDS) Up to 23 I/O pins depending upon package Internal precision oscillator (IPO) External crystal oscillator Two enhanced 16-bit timers with capture, compare, and PWM capability Single-pin, On-Chip Debugger (OCD) Fast 8-channel, 10-bit analog-to-digital converter (ADC) On-chip analog comparator Up to 18 vectored interrupts Voltage Brownout (VBO) protection Power-On Reset (POR) 2.7 V to 3.6 V operating voltage Up to thirteen 5 V tolerant input pins 20- and 28-pin packages 0 °C to +70 °C standard temperature range and -40 °C to +105 °C extended temperature operating ranges Z8 Encore!® F083A Series Z8 Encore!® F083A Series Development Kit User Manual 6 MCU The Z8 Encore! F083A Series MCU is member of a family of Zilog® microcontroller products based upon the 8-bit eZ8 core CPU. The Flash in-circuit programming capability allows for faster development time and program changes in the field. The eZ8 core CPU is upward compatible with existing Z8® instructions. The successive approximation register (SAR) ADC on the Z8 Encore! F083A is one of the fastest 10-bit ADCs available in a 28-pin or smaller package. The Z8 Encore! F083A is built for speed to handle rigorous application requirements for motor control, sensor interfacing, ballast control, and appliance controls. The development board contains circuitry to support and present all the features of the Z8 Encore! F083A Series. For more information on the Z8 Encore!® family of devices, refer to Z8 Encore!® F083A Series Product Specification (PS0263) available for download at www.zilog.com. Jumper Settings The only jumper available on the Z8 Encore! F083A development board is JP5, which affects U5 RESET/PD0. Set JP5 as follows: • • JP5 OUT (default): PD0 (GPIO) JP5 IN: RESET when SW1 pressed External Interface Headers JP1 and JP2 Figure 2 on page 8 displays the external interface headers JP1 and JP2. UM020604-0508 Z8 Encore!® F083A Series Z8 Encore!® F083A Series Development Kit User Manual 7 Schematic This section includes schematics for the Z8 Encore!® F083A Series Development Board (see Figure 2 and Figure 3 on page 9). The following components appear in the schematic but are not installed on the board: • • • • • UM020604-0508 C1, C2, C5, C6, C9, C11 through C18 JP3, JP4 P1 R2 through R5 U1, U3, U4 Schematic Z8 Encore!® F083A Series Development Kit User Manual 8 5 4 D2 PA6_nT1OUT 1 2 100 GREEN R8 D3 PA7_T1OUT 1 R9 SW2 VCC_33V 2 GND 100 YELL TEST 100K D 1 R13 R16 R17 R22 OUT IN OUT IN IN OUT OUT Analog Supply IN OUT IN OUT OUT optional IN PA2 GND GND R12 GPIO 10 RED 1 If Module is plugged onto the Dev Platform the local RS232 interface is disabled by pin 50 of JP2 JP2 U8 C21...C23 PA3_CTS0 PA4_RXD0 GND NOTE 1: R12 SW1 0 U8 1 IO 2 PA0_T0IN_JP PA1_T0OUT_JP 0 R21 0 1 2 3 4 5 6 7 8 9 10 JP5 PB6 3 R22 PB1/ANA1 PB2/ANA2 PB3/CLKIN/ANA3 VDD PA0/T0IN/T0OUT/XIN/ PA1/T0OUT/XOUT GND PA2/DE PA3/CTS0 PA4/RXD0 PB0_ANA0 PC3_COUT PC2_ANA6 PC1_ANA5 PC0_ANA4 DBG PD0 PA7_T1OUT PA6_nT1OUT PA5_TXD0 20 19 18 17 16 15 14 13 12 11 C22 VCC_33V PA0_T0IN PA1_T0OUT GND 0.033uF C21 C10 30uF 0.033uF 0.001uF PA2 PA3_CTS0 PA4_RXD0 PA5_TXD0 PA3_CTS0 PA4_RXD0 PA5_TXD0 Z8F04xA R14 0 0 PB5_JP PB2_ANA2 PB4_ANA7 PB5 PB3_ANA3 SENSE C23 + 1 2 0 U5 PB0/ANA0 PC3/COUT/LED PC2/ANA6/LED PC1ANA5/CINN/LED PC0/ANA4/CINP/LED DBG RESET/PD0 PA7/T1OUT PA6/T1IN/T1OUT PA5/TXD0 -RESET VCC_33V VCC_33V HEADER 2 EMI Filter 20 pin footprint U6 PB1_ANA1 PB2_ANA2 PB3_ANA3 VCC_33V PA0_T0IN PA1_T0OUT GND PA2 PA3_CTS0 PA4_RXD0 IO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R16 0 PB2/ANA2 PB4/ANA7 PB5/Vref PB3/ANA3/CLKIN PB6(AVDD) VDD PA0/T0IN/T0OUTXIN PA1/T0OUT/XOUT GND PB7(AGND) PA2/DE PA3/CTS0 PA4/RXD0 PA5/TXD0 PB1/ANA1 PB0/ANA0 PC3/COUT/LED PC2/ANA6/LED PC1/ANA5/CINN/LED PC0/ANA4/CINP/LED DBG RESET/PD0 PC7/LED PC6/LED PA7/T1OUT PC5/LED PC4/LED PA6/T1IN/T1OUT 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 A21 37 A22 39 -CS0 41 -CS2 43 D1 45 D3 47 D5 49 D7 51 -MREQ 53 GND 55 -WR 57 -BUSACK 59 1 3 3 PB7 PB0_ANA0 2 2 1 PB1_ANA1 PB2_ANA2 PB3_ANA3 PC0_ANA4 PC1_ANA5 PC2_ANA6 PB4_ANA7 C20 C11 0.001uF 20 MHz C12 0.001uF C13 0.001uF C14 0.001uF C15 0.001uF C16 0.001uF C17 0.001uF C18 0.001uF NOTE 2 GND J2 TABLE 2 Clock Mode Internal Only A R14 R15 none none Crystal 0 Ohm 0 Ohm Ceramic Res 0 Ohm 0 Ohm External CMOS none none R18 none C19 none none Yes none none none none C20 Note 2: The XP supports internal, external crystal, external ceramic resonator, external R/C and external CMOS drive clock modes. R14, R15, R18, C19, C20 and Y1 are used to support the clock mode selected. The development board is shipped configured for external 20MHz ceramic resonator or internal clock operation. When using Internal oscilator, pins 7 and 8 could be used as GPIO ports PA0 and PA1. To do so install R20 and R21. Table 2 shows the recommended clock mode configurations. Y1 none none Yes Yes none Yes none none PB0_ANA0 PB1_ANA1 PB2_ANA2 PB3_ANA3 PC0_ANA4 PC1_ANA5 PC2_ANA6 PB4_ANA7 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 PA5_TXD0 GND -DIS_232 -DIS_IRDA -DIS_IrDA GND VCC_33V A0 A3 VCC_33V A7 A9 A14 A16 GND A1 A12 A20 A17 -DIS_FLASH VCC_33V A23 -CS1 D0 D2 D4 GND D6 -IOREQ -RD -INSTRD -BUSREQ B HEADER 30x2/SM A HEADER 8X2 Title (Use PA0_T0IN pin on JP2) XP 4K MDS Processor Module. Schematic. Size B Date: 5 4 3 2 Figure 2. Schematic, Z8 Encore!® F083A Series MCU Development Board UM020604-0508 PD0 GND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 -TRSTN -F91_WE GND A6 A10 GND A8 A13 A15 A18 A19 A2 A11 A4 A5 NOTE 1: C19 D connector 1 for reference onlyJP1 DBG 1M Y1 PC0_ANA4 PB2_ANA2 PB0_ANA0 GND PC5 PC6 PB5_JP PA0_T0IN_JP PA1_T0OUT_JP PA2 HEADER 30x2/SM R18 B 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 C PB1_ANA1 PB0_ANA0 PC3_COUT PC2_ANA6 PC1_ANA5 PC0_ANA4 DBG PD0 PC7 PC6 PA7_T1OUT PC5 PC4 PA6_nT1OUT 28 27 26 25 24 23 22 21 20 19 18 17 16 15 R17 0 GND connector 2 PC2_ANA6 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 28 pin footprint Z8F04xA_28 R15 0 PB6 PB7 RESET/TEST2 R13 GND VCC_33V R20 R19 10K GND NOTE 3: Resistors R20 and R21 are not populated. See Note 2. C PB4_ANA7 PC1_ANA5 PB3_ANA3 PB1_ANA1 VCC_33V PC4 PC7 PC3_COUT PA6_nT1OUT GND PA7_T1OUT TABLE 1 100 2 VCC_33V VCC_33V 2 R11 R10 D4 PC3_COUT 3 Note 1: PB6 and PB7 are dual function pins (GPIO or Analog supply) R12, R13, R16, and R17 are zero-ohm resistors used in conjunction with GPIO Control Registers to select function desired. C21, C22, and C23 are bypass capacitors that are used for better noise rejection. U8 is an optional filter that can be used to improve the quality of the Analog Supply. The development board is shipped configured for Analog Supply. Table 1 shows the configurations recommended R7 Document Number Rev 96C0941-001 Tuesday, March 18, 2008 D Sheet 1 2 of 3 Z8 Encore!® F083A Series Development Kit User Manual 9 5 4 3 2 1 VCC_33V J1 PWR JACK VCC RXE050 + C3 C4 0.1uF R23 10K 100/10 -Z_RST 5 VIN OUT 2 4 SENSE SHDN GND SENSE LT1129-3.3/DD VCC_33V 1 VCC_33V PA5_TXD0 C1+ 4 C1- 5 C2+ C6 0.1uF 6 C2- PA5_TXD0 U7 3 D 2 C1 0.1uF 19 VCC 5V U1 C2 0.1uF F1 V+ 3 C5 0.1uF 7 13 T1IN T1OUT 17 GND 12 T2IN T2OUT 8 PA3_CTS0 15 R1OUT PA4_RXD0 10 R1 CONSOLE GND P1 V- TXD0 CTS0 RXD0 1 6 2 7 3 8 4 9 5 D + C7 C8 680 PA3_CTS0 100/10 PA4_RXD0 2 0.1uF R24 15K R2OUT R1IN 16 R2IN 9 DB9 Female USER D1 LED 1 3.3 OK EN SHDN NC NC 14 11 MAX3222 GND 18 1 20 GND 2 3 1 VCC_33V GND R2 10K C U3A 14 C 14 74LVC04/SO U3B 1 -DIS_232 2 7 74LVC04/SO 3 JP3 4 1 2 7 GND U3C 74LVC04/SO GND 5 R3 C9 VCC_33V 6 68 330nF R4 7 B 14 U3D PA5_TXD0 74LVC04/SO 9 -DIS_IRDA 10 IRDA_SD 8 PA4_RXD0 7 VCC 1 LEDA 2 TXD 4 SD 3 RXD 6 GND 7 JP4 5 1 2 0 14 R5 10K U3E 74LVC04/SO 11 B U4 2R7 T 14 DIS RS232 GND ZHX1810 14 DIS IRDA GND U3F VCC_33V R6 10K 7 A 12 1 2 3 4 5 13 1 2 3 4 5 74LVC04/SO TP1 GND TP2 P2 VCC_33V GND 1 3 5 DBG INTERFACE 2 4 6 A -Z_RST DBG DBG Title XP 4K MDS Processor Module. Schematic. Header 3x2 Size B Date: 5 4 3 2 Figure 3. Schematic, Z8 Encore!® F083A Series MCU Development Board UM020604-0508 Document Number Rev 96C0941-001 Wednesday, March 12, 2008 D Sheet 1 3 of 3 Z8 Encore!® F083A Series Development Kit User Manual 10 Customer Support For answers to technical questions about the product, documentation, or any other issues with Zilog’s offerings, please visit Zilog’s Knowledge Base at http://www.zilog.com/kb. For any comments, detail technical questions, or reporting problems, please visit Zilog’s Technical Support at http://support.zilog.com. UM020604-0508 Customer Support Z8 Encore!® F083A Series Development Kit User Manual 11 Warning: DO NOT USE IN LIFE SUPPORT LIFE SUPPORT POLICY Z IL O G ' S P RO D U C T S A RE N O T A U T H O R IZ E D F O R U SE A S CR IT ICA L COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION. As used herein Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Document Disclaimer ©2008 by Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO D O E S N O T A S S U M E L I A B I L I T Y F O R I N T E L L E C T U A L P R O P E RT Y INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this document has been verified according to the general principles of electrical and mechanical engineering. Z8 Encore! and Z8 Encore! XP are registered trademarks of Zilog, Inc. All other product or service names are the property of their respective owners. UM020604-0508 Mouser Electronics Related Product Links 692-Z8F083A0128ZCOG - ZiLOG Z8F083A0128ZCOG