Download Serial Communication Command Reference

Utility Commands
Restarting the Controller < RESET command >
This command restarts the Controller.
No parameters are provided for this command.
< Command format >
R E S E T CR
or
R S CR
< Response format >
When processing ends successfully
None
When processing fails
E R CR
Ending Ethernet Communications < EXIT command >
This command ends the TELNET connection for Ethernet communications and disconnects the line.
No parameters are provided for this command.
< Command format >
E X I T CR
< Response format >
When processing ends successfully
None
When processing fails
E R CR
ZFX-C Serial Communication Command Reference
About Communication Commands
29