Download ConneXium TCSESB Basic Managed Switch Web

Redundancy
6.1 Ring Redundancy
Note: Deactivate the Spanning Tree protocol for the ports connected to the
redundant ring, because the Spanning Tree and the Ring Redundancy work
with different reaction times ( Redundancy:Rapid Spanning Tree:Port).
Note: When activating the HIPER-Ring function, the device sets the
corresponding settings for the pre-defined ring ports in the configuration table
(transmission rate and mode). If you switch off the HIPER-Ring function, the
ports, which are changed back into normal ports, keep the ring port settings.
82
S1A78429 - 12/2010