Download NYP78 800-P78 8M – Mic croscop pe Docu mentati ion Set
Transcript
NYP78 800-P78 8M – Miccroscop pe Documentatiion Set Adapte er Parts Photomiicrograph with w Nikon Co oolPix P780 00 ! Main M Unit Re elay Lens P-7800 Atttachment Φ30mm Φ Co onversion Ring C--Mount Sleeve S Installation n Re emove lens ring first (Ro otate counte er-clockwise e) Next, scrrew adapter into cam mera and insttall. ** For insta allation to microscope, m p please see ne ext page When using g Φ30mm conversion c ring Insert main n unit all the e way down n to the 30Φrin ng. It should d be fit tightt. B Bottom should be lined W When using C-mount C slee eve 1. Attach C-m mount sleev ve into micrroscope C-m mount. 2. Insert main unit (with h φ30mm cconversion ring) r into C-mo ount sleeve and secure e with screw. M Make No Gap p Installlation to M Microscope Insstalling to EEyepiece Rem move eyepiiece and insert adapter to eyepiecee tube. onversion ring Wh hen tube insside diamete er is Φ30m mm, attach co to main unit fi rst, and inse ert it into ey yepiece tubee. Wh hen it is Φ2 23.2mm, insert main unit directly in nto eyepiece e tube. * Adapter maay start to ro otate when diopter d ring iis attached to t eyepiece. In such case e, insert the adapter a afte er turning dio opter ring to o either end. Nik kon F photo otube Inssert main un nit to Nikon F-tube. In re ecent Nikon n models, the ones Witth V-T photo otube part is i equipped with F-tubee. In older o mode ls, Optiphott, Biophot, SMZ-2T S trino ocular mode els are e with F-tub be. When 35mm camera a or Polaroid d system is insstalled to miicroscope, itt is likely be same as thee old modells. *SMZ-10 * req quire optiona al sleeve. * Adapter may start to rotate when w diopte er ring is atta ached to eyepiece. In succh case, inserrt the adapter a afterr turning dio opter ring to either end. C-m mount C-m mounts is offten used fo or attaching CCD camera ras, and has male scrrew of outerr diameter 25.4mm. 2 Firsst, attach C--mount sleev ve to microscope e C-mount. Second, S inse ert main un it (with φ30 0mm conve ersion ring) into C-mo ount sleeve e and secure with screw w. *Compatible * e only with direct d (1.0x) C-mount. C C-mount wiith lens insid de should no ot be used. Oly ympus PT p phototube A PT P phototub be has an ou uter diamete er of φ38m m witth curving th hreads at th he top. U-SPT, SZ-PT tub bes are e with PT-tu be. When 35mm camerra or Polaroid syste m is installe ed to microsscope, it iss likely be PT T tube. It requires fixation sleeve NY Y-BH (option n) to secure e adapter to microscopee. NY-BH JIS phototube e JIS tube has ou uter diameter φ25mm,, and d inner diam meterΦ23.2 2mm. Old Olympus mod dels are oftten equippe ed with JIS tube. It requ uires fixation n sleeve NY Y-JIS (option n) to secure e adapter to microscopee NY-JIS *without NY-JISS, image ma ay come out blurry. Camera Setting S ■ Ma ain Feature es Rem mote Shutter OK K button Multi--Selector ** Plea ase refer to camera man nual for bassic operation n and initial set up. 〇 Eassy Setting ・・・ Easy y semi-auto mode ・Set tthe Mode Dial D to Scene e. ・Presss Menu Buttton , and ro otate comm and dial to select s Landsscape. Presss OK. ・Presss Zoom con ntrol to T (rig ght). Zoom up till there e will be no vignette. v Zo oom (W) Zoom (T) ・Foccus with microscope fo ocus handle while check king image on o LCD view wer. *** Focus point is differen nt for microsscope and dig gital camera as. ocus with miccroscopes while w watchin ng LCD vieweer. Please make sure to fo ・Pre ess Shutter Release R (or remote shu tter) to captture image. ・Pre ess the Playback Button n to check im mage taken. ・Rotate Exposu ure Dial and adjust expo osure level. + for brighter and - for darkerr. 〇 Manual Setting ・・・Try manual setting when not satisfied with brightness, focusing, T or color level of the image taken with easy setting. ・Rotate and set Mode Dial to M (manual). ・Press Focus Mode on the multi-selector. Select MF (manual focus) and press OK. ・Using Multi- Selector , set focus level up to∞ (Infinite) and fix. ・Adjust the focus with microscope fine adjusting handle. ・Press Zoom control to T (right). Zoom up till there will be no vignette. ・Press Quick Menu Button and select ISO Sensitivity to set ISO level. *ISO sensitivity is camera’s base sensitivity. Higher the number, more you be able to capture images in dark environment. However, when it is set higher than 800, noise starts to appear, therefore try keeping it low level as long as there is no light shortage. Exposure Setting (P49) ・Rotate Sub-Command Dial and select lowest F# value. ・Next, rotate Command Dial to change Shutter Speed until Exposure Indicator indicate center value (±0) ・Take a picture for a test. When image is too bright, try shorter shutter speed(-). In the same manner, when image is too dark, try longer shutter speed (+) Brightness of image depends on following 3 criteria. Please refer when using manual setting. BRIGHT High・・・ ISO ・・・Low Low・・・ Exposure (F/#) ・・・High Long・・・ Shutter Speed ・・・Short ・When you have a wireless remote control (ML-L3), press Self-Timer. DARK Self-Timer Select Remote Control, and press OK. ・When setting is finished, take a picture for test using Remote Control. ・Pressing Play button after taking shot enables you to see and check image. ・Registering the setting in mode dial U1, U2, or U3 enables you to shoot next time with the same setting by just switching to this mode. Press Menu Button. Use multi selector to choose Save User Setting and press OK. 〇 Other Setting ・・ Please also refer to CoolPix P7800 user manual for detail ・White Balance ・・ Please adjust white balance manually when it is hard to produce desired image due to the sample color or tone of light. (Ref 35) ・Picture Control ・・ Change the settings for image recording according to your preference Sharpness, contrast and saturation can be adjusted in detail. (Ref 40) ・Image Size ・・ Small data size enables you to capture more images with single memory card and easy to handle whereas large data size is more suitable for printing and enlargement. (ref P29) ・Auto Off ・・ When no operation is performed for the selected time length, the monitor would shut off and camera enter standby mode. When the AC adapter is connected, it is set for 30 minutes automatically. (Ref P84) ・Date Imprint ・・ Date and time of recording can be imprinted on pictures. (Ref P77) Othe er thing you u can do witth CoolPix P P7800 Expossure Bracke eting enable es to capture e image witth 3 differen nt exposuress in a single shot. (R Ref P38) + 0.3 Base Pic -0.3 Active e D-Lighting g reduces ov ver and und der exposure e, preserve details in hiighlights and shadows,, creating ph hotograph with w natural contrast. (R Ref P56) Ocular Microme eter Installa ation Φ21m mm ocular micrometer m can c be installled into NY Y-P7800. Firsst turn the aadapter tip to t counte er-clockwise e and remov ve installing g bracket. Next, N insert ocular micrrometer to bracket with printed surfa ace facing do own. Finallyy, reinstall bracket to ad dapter bodyy to set. Printted surface ffacing down Micrrometer S11- CF - Speciall design miccrometer forr digital cam mera adapte er (10m mm/100split pitch 0.1mm m) S11-C CF removes numbers wrritten on the e micrometerr and also shifted scale e slightly to the t edge for clearer view w.