Download User manual
Transcript
User manual DUKE Table of content 1. Safety instructions ........................................................................................................................... 3 1.1. FOR SAFE AND EFFICIENT OPERATION ............................................................................ 3 2. Technical data ................................................................................................................................. 4 3. Operation ......................................................................................................................................... 4 4. 3.1. Functions via DIP .................................................................................................................... 4 3.2. Auto Mode ............................................................................................................................... 5 3.3. Sound Mode ............................................................................................................................ 5 3.4. Master/Slave Mode .................................................................................................................. 5 DMX Control .................................................................................................................................... 5 2/6 1. Safety instructions • This device is suitable for indoor use only. • All modifications to the device will void the warranty. • Repairs are to carry out by skilled personnel only. • Use only fuses of the same type and original parts as spare parts. • Protect the unit from rain and humidity to avoid fire and electric shocks. • Make sure to unplug the power supply before opening the housing. 1.1. FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperature Avoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 41°F /5°C, or ex ceeding 113°F /45°C. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of dust. Containers with water should not be placed on the set. Keep away from sources of hum and noise Such as transformer motor, tuner, TV set and amplifier. To avoid placing on un-stable location Select a level and stable location to avoid vibration. Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt. If out of work, contact sales agency immediately Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not open the cabinet by yourself, it might result a danger of electric shock. Take care with the power cable Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not using the device for an extended period of time, be sure to disconnect the plug from the receptacle. Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified personnel. All electrical and mechanical connections have to be carried out according to the European safety standards. 3/6 2. Technical data Power supply 90-250VAC, 50~60Hz Power consumption 33W Current 0.28A Sound Control Via built-in microphone DMX512 connection 3 Pin XLR Weight 4.85 Kg Measurements 370 x 360 x 250 mm Maximum ambient temperature 45°C Maximum housing temperature 50°C Fuse F1A, 250V Channel 3 Number of LEDs 2 x 9W 3. Operation 3.1. Functions via DIP Function DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8 DIP9 DIP10 MODE Red 1 0 0 0 0 0 0 0 0 0 Auto (Master) Green 0 1 0 0 0 0 0 0 0 0 Auto (Master) Blue 0 0 1 0 0 0 0 0 0 0 Auto (Master) Strobe slow 0 0 0 1 0 0 0 0 0 0 Auto (Master) Strobe 0 0 0 0 1 0 0 0 0 0 Auto (Master) Strobe fast 0 0 0 0 0 1 0 0 0 0 Auto (Master) Motor mode 0 0 0 0 0 0 1 0 0 0 Auto (Master) Auto 0 0 0 0 0 0 0 1 0 0 Auto (Master) Sound 0 0 0 0 0 0 0 0 1 0 Sound Control medium Control Master/Slave (Master) 0 0 0 0 0 0 4/6 0 0 0 1 Auto (Master) 3.2. Auto Mode In order to select Auto mode, set DIP switch 1 to 10 to OFF, set DIP switch 8 to ON. 3.3. Sound Mode In order to select Sound Control Mode, set DIP switch 1 to 10 to OFF, set DIP switch 9 to ON. 3.4. Master/Slave Mode In order to select Master/Slave Mode, set Auto Mode or the Sound Control Mode from DIP switch 1 to 9 to OFF, set DIP switch 10 to ON. In Master/Slave operation one unit will act as the controlling unit and the others will react to the controlling unit’s built-in programs. 4. DMX Control Channel Value Function CH1 000-004 LED Close 005-028 Red 029-056 Green 057-084 Blue 085-112 Blue/Green 113-140 Red/Blue 141-168 Green/Red 169-197 Red/Green/Blue 198-224 Tri color chase automatically 225-255 Seven color chase automatically 000-004 No strobe 005-255 Strobe from slow to fast 001-127 Motor positive rotation 128-255 Motor reversion rotation from slow to fast CH2 CH3 5/6 Importer: B & K Braun GmbH Industriestraße 1 D-76307 Karlsbad www.bkbraun.com [email protected] 6/6