Transcript
Y 2006 CLASS II LASER PRODUCT User Manual ZHONGSHAN CITY NEWWISH METAL & ELECTRONICAL GUANGDONG PROVINCE, CHINA SAFETY PRECAUTIONS 1/4" Plastic Knob Laser Pointer Assembly 1-1/2" Carriage Bolt Installation: Step 1: First, Remove the 1-1/2” Carriage Bolt and Plastic Knob from the hole in the top of the Laser Mount. Now insert the 1-1/2” Carriage Bolt through an available 1/4” hole in the Top Platform. (If none of the available holes suit your needs drill a 1/4” hole in the desired location.) Warning Labels are located on the product, as shown: LASER RADIATIONDO NOT STARE INTO BEAM LASER DIODE Wavelength: 650nM Max Output Power: <1mW This device complies with 21 CFR. Chapter I, Subchapter J CLASS II LASER PRODUCT ZHONGSHAN CITY NEWWISH METAL & ELECTRONICAL GUANGDONG PROVINCE, CHINA Manufactured date: JANUARY 2006 CAUTION NOTE: The Laser Pointer may be mounted on ether side of the Top Platform, and is easily moved from one side of the Top Platform to the other. If you are using the Pedal Pusher, when mounting the Laser Pointer make sure that it doesn’t interfere with your Pedal Pusher Levers. Step 2: Place the Laser Pointer Assembly onto the Carriage Bolt. ACTUAL SIZE Step 3: 1/4" Secure the Laser Assembly to the Top Plate with the 1/4” Plastic Plastic Knob Knob. Laser Pointer Assembly 1-1/2" Carriage Bolt Battery Installation: Use a butter knife or flat screw driver to remove the battery cover. Batteries are inserted with their possitive pole (+) pointing down. (Illustration below) 1. CAUTION: Use of controls, adjustments, or performance of procedures other than given in USER MANUAL may result in hazardous laser light exposure. 2. This product is safe to use in normal operations as described in these instructions. AVOID DIRECT EYE EXPOSURE. DO NOT LOOK DIRECTLY INTO THE LASER EMITTER. Battery Compartment Cover Specifications: Power: Wavelength: Output Power: Battery Type: Battery Life: Weight: Dimensions: Color: On/Off Button Class II 650nm 1mW 2 AA 150 Continuous hours 31.2g Without Batteries 6.929” L X 1.533” W Dark Grey (+) end of AA Battery Laser Emitter The Grace Company certifies that the Gracie Laser complies with the government FDA regulation 21CFR 1040.10 and 1040.11.