Download 2013 Decal Catalog

2013 Decal Catalog
CONTENTS
Genie®
Danger Decals................................4
Illustration/Pictoral Decals.........6
Instruction Decals.........................7
Warning Decals.............................8
Miscellaneous Decals...................9
JLG
Capacity Decals..............................10
Caution Decals................................16
Control Panel Decals.....................17
Cosmetic Decals.............................33
Danger Decals.................................35
Illustration/Pictoral Decals......... 36
Skyjack®
Important Decals.......................40
Instruction Decals......................41
Miscellaneous Decals................43
Warning Decals..........................45
Warning/Danger Decals...........51
Capacity Decals..............................54 Warning Decals..........................61
Caution Decals................................55
Control Panel Decals.................... 56
Danger Decals.................................57
Illustration /Pictoral Decals.........58
Miscellaneous Decals................... 60
2
1-877-JLG-LIFT | www.jlg.com
CONTENTS
Snorkel®
Capacity Decals..............................62
Control Panel Decals.....................63
Danger Decals................................ 64
Illustration/Pictoral Decals..........65
Miscellaneous Decals................... 66
Index By Manufacturer
Genie.............................................68
JLG................................................69
Skyjack..........................................74
Snorkel..........................................75
For More Information
Visit us online at onlineexpress2.jlg.com
Phone: 877-JLG-LIFT
Fax: 800-733-8939
1-877-JLG-LIFT | www.jlg.com
3
GENIE® DANGER DECALS
GN31508
GN33952
Electric Hazard Plug
GN31060
DANGER
Do Not Alter Switch
Tip-Over Axles
Electrocution / Fire Hazard
Death or serious injury will
result from use of improper
or damaged cord and outlet.
DANGER
Tip-over Hazard
Altering or disabling limit
switches can result in machine
tip-over. Machine tip-over will
result in death or serious injury.
Connect charger to a
grounded AC 3-wire
electrical outlet only.
Do not alter or disable limit
switch(s).
Before each use, inspect for
damaged cord, cables and
wires. Replace damaged
items before operating.
31060 C
Tilt Alarm
GN32932
DANGER
DANGER
Tip-over hazard.
Do not raise boom past
horizontal unless both
axles are extended.
32932 084A
31508 D
GN43091
GN43617
General Safety
DANGER
Improper Use Hazard
1
2
3
4
5
Avoid hazardous situations.
Always perform a pre-operation inspection.
Always perform function tests prior to use.
Inspect work place.
Only use the machine as it was intended.
Do not operate unless:
You read, understand and obey:
-manufacturer’s instructions and safety rules safety and operator’s manuals and decals
-employer’s safety rules
-applicable governmental regulation
You are properly trained to safely operate this
machine.
Electrocution Hazards
Do not alter or disable machine components that in
any way affect safety and stability.
Do not place ladders or scaffolds in platform or
against any part of this machine.
Do not use machine on a moving or mobile surface
or vehicle.
Fall Hazards
Do not sit, stand or climb on
the platform guard rails.
Maintain a firm footing on the
platform at all times.
This machine is not
electrically insulated and
will not provide protection
from contact with or
proximity to electrical
current.
Minimum Safe Approach Distance
Voltage
Phase to Phase
Feet
0 to 300V
300V to 50KV
50KV to 200KV
10
15
Distance
Meters
Avoid Contact
3.05
4.60
200KV to 350KV
20
350KV to 500KV
25
7.82
500KV to 750KV
750KV to 1000KV
35
45
10.67
13.72
AB01234
6.10
Do not climb down from the
platform when raised.
Attach platform entry chain
and close entry gate before
operating.
Do not drive machine on
or near uneven terrain,
unstable surfaces or other
hazardous conditions with
the platform raised.
Do not place or attach overhanging loads to any
part of this machine.
43091 F
Line Voltage
Required Clearance
Avoid Contact
300V to 50KV
10 ft
50KV to 200KV
15 ft
4.60 m
200KV to 350KV
20 ft
6.10 m
350KV to 500KV
25 ft
7.62 m
500KV to 750KV
35 ft
10.67 m
750KV to 1000KV
45 ft
13.72 m
3.05 m
Collision Hazards
Be aware of limited sight
distance and blind spots
when driving or operating.
Check work area for
overhead obstructions or
other possible hazards.
Be aware of crushing hazard
when grasping the platform
guard rail.
Do not raise platform unless
machine is on firm, level ground.
avoid drop-offs, holes and
unstable or slippery
surfaces.
Do not operate machine in
strong gusty winds. Do not
increase surface area of
platform or load. Increasing
area exposed to wind will
decrease machine stability.
Maintain required clearance.
0 to 300V
Use common sense and planning when operating
machine with controller from ground. Maintain
safe distances between operator, machine and
fixed objects.
Description
Models with outriggers: Do
not raise platform unless
machine is level.
Death or injury can result
from contacting electric
power lines.
Always contact the
electric power line owner.
The electric power shall
be disconnected or the
power lines moved or
insulated before machine
operations begin.
Keep hands and limbs out of scissors.
Tip-over Hazards
Models without outriggers:
Do not raise platform unless
machine is on a level
surface.
43696 B
Electrocution Hazard
43617 017A
Crushing Hazards
Counterweight uphill:
1 Retract boom.
2 Lower boom.
DANGER
Batteries are used as counterweight
and are critical to machine stability.
Each battery must weigh
65 pounds (29.5 kg).
Be sure all tire are in good condition, castle nuts
are properly tightened and cotter pins are properly
installed.
1
2
Electric Hazard GS
Tip-over hazard.
Failure to replace batteries with
proper weight batteries will cause
death or serious injury.
Use extreme care and slow speeds while driving
the machine in stowed position across uneven
terrain, debris, unstable or slippery surfaces and
near holes and drop-offs.
Tip-over Hazard
if tilt-alarm
sounds, unit is
on a severe
slope. Death or
serious injury
could occur.
33952 B
DANGER
Do not push off or pull toward any object outside of
the platform.
The operator is responsible for safe machine
operation. This includes:
Counterweight downhill:
1 Lower boom.
2 Retract boom.
GN43696
Tip-Over Battery
Failure to read, understand and obey the operator’s manual and
the following safety rules will result in death or serious injury.
1
2
GN44255
Crushing Hazard
Observe and use color-coded direction arrows on
the platform controls for drive and steer functions.
DANGER
Explosion Hazards
Do not start engine if you smell or detect liquid
petroleum gas (LPG), gasoline, diesel fuel or
other explosive substances.
Do not refuel the machine with the engine
running.
GN44737
Tip-Over Trays
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
DANGER
Crushing Hazard
Contact with
moving parts will
result in death or
serious injury.
Be sure all maintenance has been performed as
specified in the appropriate operator’s and service
manuals
Be sure all decals are in place and legible.
Be sire safety, operator’s and responsibilities
manuals are completed, legible and in the storage
container located on the platform.
Tip-over hazard.
Raising the
platform or driving
the machine with
chassis trays open
will result in death
or serious injury.
Keep away from moving
parts.
44255 C
Close chassis trays
before raising the
platform or driving the
machine.
44737 B
GN46262
Battery Safety
Burn Hazards
Explosion Hazards
contain acid
sparks, flames and
∙ Batteries
∙ Keep
Always wear protective
lighted tobacco away from
clothing and eyewear
when working with
batteries.
acid. Neutralize battery
acid spills with baking
soda and water.
charger to a
∙ Connect
grounded AC 3-wire
electrical outlet only.
each use, inspect
∙ Before
for damaged cord, cables
and wires. Replace
damaged items before
operating.
Improper Use Hazard
Failure to read, understand and obey the safety rules will result in death or serious injury.
The operator is responsible for safe machine operation.
This Includes:
1
2
3
4
5
Avoid hasardous situations.
Always perform a pre-operation inspection.
Always perform function tests prior to use.
Inspect the work place.
Only use the machine as it was intended.
Do not operate unless:
You read, understand and obey:
- manufacturer’s instructions and safety rules - safety
and operator’s manuals and decals
- employer’s safety rules
- applicable governmental gegulations
72853 A
spilling or
∙ Avoid
contact with battery
∙
∙
batteries. Batteries emit
explosive gas.
Battery tray should be open
during entire charging cycle.
Do not contact battery
terminals or cable clamps
with tools that may cause
sparks.
Electrocution
Hazards
GN72853
DANGER
DANGER
Failure to obey the following battery and charger safety rules
will cause death or serious injury.
You are properly trained to safely operate this machine.
Component Damage
contact with hot
∙ Avoid
Hazard
Lifting Hazard
or live electric circuits.
proper lifting techniques ∙ Do not use any charger
∙ Use
not expose
and appropriate number of
∙ Do
greater than 24V to charge
batteries or charger to
46262 C
water and/or rain.
people when lifting batteries.
batteries.
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
4
1-877-JLG-LIFT | www.jlg.com
GENIE® DANGER
DECALS
SAFETY DECALS
GN97547
GN82561
Electric Hazard
Use Safety Arm
DANGER
DANGER
ELECTROCUTION HAZARD
Engage safety
arm before
performing
maintenance
or repair.
Crushing Hazard
Death or serious injury can
result from contact with
moving scissor arms.
82561 B
See service
manual.
Death or serious injury will result from contact with this
machine should it become electrically charged.
KEEP CLEAR
97547
GN97890
General Safety Rules
DANGER
Failure to read, understand and obey the operator’s manual and
the following safety rules will result in death or serious injury.
Improper Use Hazard
Do not alter or disable machine components that in any
way affect safety and stability.
The operator is responsible for safe machine
operation. This includes:
Do not push off or pull toward any
object outside of the platform.
1 Avoid hazardous situations.
Do not place or attach overhanging
loads to any part of this machine.
Do not place ladders or scaffolds in
platform or against any part of this
machine.
Do not use this machine on a moving or mobile surface or
vehicle.
Be sure all tires are in good condition, air-filled tires are
properly inflated and lug nuts are properly tightened.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect work place.
5 Only use the machine as it was intended.
Do not operate unless:
You read, understand and obey:
-manufacturer’s instructions and safety rules safety and operator’s manuals and decals
-employer’s safety rules
-applicable governmental regulation
Fall Hazards
You are properly trained to safely operate this machine.
Electrocution Hazards
This machine is not electrically
insulated and will not provide
protection from contact with or
proximity to electrical current.
Minimum Safe Approach Distance
Voltage
Distance
Phase to Phase
Feet Meters
0 to 300V
300V to 50 KV
50KV to 200KV
Avoid Contact
10
3.05
15
4.60
200KV to 350KV
20
6.10
350KV to 500KV
25
7.82
500KV to 750KV
750KV to 1000KV
35
45
10.67
13.72
Tip-over Hazards
Do not raise or extend boom unless
machine is on firm, level ground.
Do not depend on tilt alarm as a
level indicator. Tilt alarm sounds in
platform only when machine is on a
severe slope.
Do not raise boom when wind speeds
may exceed 28 mph / 12.5 m/s.
Do not operate machine in strong or
gusty winds. Do not increase surface
area of platform or load. Increasing
area exposed to wind will decrease
machine stability.
Do not drive machine on or near uneven terrain, unstable
surfaces or other hazardous conditions with boom raised
or extended.
Do not drive machine on a slope that exceeds the
maximum slope or side slope rating for the machine.
Use extreme care and slow speeds while driving the
machine in stowed position across uneven terrain,
debris, unstable or slippery surfaces or near holes
and drop-offs.
Do not attempt to free a caught or snagged platform
using platform controls. All personnel must be removed
from platform before attempting to free platform using
ground controls.
Occupants must wear a safety
belt or harness in accordance
with governmental regulations.
Attach lanyard to anchor
provided in platform.
Do not sit, stand or climb on
the platform guard rails.
Maintain a firm footing on the
platform floor at all times.
Do not climb down from the
platform when raised.
Lower the platform entry midrail or close the entry gate
before operating.
Collision Hazards
Be aware of limited sight distance and blind spots when
driving or operating.
Check work area for overhead
obstructions or other possible
hazards.
Be aware of crushing hazard
when grasping the platform guard
rail.
Observe and use color-coded
direction arrows on the platform
controls and drive chassis for
drive and steer functions.
Do not lower the boom unless the area below is clear of
personnel and obstructions.
Explosion Hazards
Do not start engine if you smell or detect liquid
petroleum gas (LPG), gasoline, diesel fuel or other
explosive substances.
Do not refuel the machine with the engine running.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Be sure all maintenance has been performed as
specified in the appropriate operator’s and service
manuals
Be sure all decals are in place and legible.
Be sire safety, operator’s and responsibilities manuals
are completed, legible and in the storage container
located on the platform.
97890 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
5
GENIE® ILLUSTRATION/PICTORAL DECALS
GN27204
GN27205
Arrow Blue
Arrow Yellow
GN27206
GN27207
Triangle Blue
Triangle Yellow
27206 B
27204 B
27207 B
27205 B
GN28174
GN28171
Power To Platform
No Smoking
GN27867
GN40434
27867
Swivel Lock
Lanyard Anchorage Point
Swivel
Lock
230V AC
10A
28174 F
28171 E
GN43618
Direction Arrows
GN44980
Power To Charger 115V
GN52475
Transport Tiedown
115V AC
15A
52475 C
+
44980 D
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
6
1-877-JLG-LIFT | www.jlg.com
GENIE® INSTRUCTION
DECALS
SAFETY DECALS
GN28165
Footswitch Operation
GN30080
Max Load 500 lb
INSTRUCTIONS
Start
Engine
Operate
Functions
Stop
28165 C
GN72970
Charger Operation
GN43089
INSTRUCTIONS
INSTRUCTIONS
Operate, GCP
Emergency Stop
Operation
Push in red Emergency Stop
button to stop all functions
and turn machine off.
Turn the key switch to ground
control.
Pull out ground red
Emergency Stop buttons to
the on position.
Be sure battery switch is
connected before operating
machine.
Emergency
Lowering
Move toggle switch OR pull
knob OR push button to
lower platform.
After Each Use
To Position Platform
Move the toggle switch
according to the markings on the
control panel.
Drive and steer functions are not
available from ground controls.
Park machine on a firm,
level surface.
Remove key to secure from
unauthorized use.
Chock wheels.
Charge batteries.
43089 F
Battery Charger Operating Instructions
Observe and Obey:
· Do not operate the machine with discharged
batteries.
· Do not operate machine with battery charger
plugged in
· Do not use external charger or booster battery.
· Recharge batteries after each work shift.
· Use proper AC input voltage for charging as
indicated on charger.
· Use only Genie authorized batteries and charger.
· Do not expose charger to water or rain.
72970 C
GN82559
Annual Inspection Required
INSTRUCTIONS
· If charger does not come on, press and hold low voltage start
switch (if equipped).
· The charger will automatically shut off when charging cycle is
complete.
· Check battery acid level when charge cycle is complete.
Replenish with distilled water to the bottom of the fill tube.
GN97887
GN82657
Max Side Force ANSI
Battery Connect
INSTRUCTIONS
Battery Connection Diagram
+
+
Annual inspection
required.
-
See service manual for
inspection report.
-
+
-
+
QD1
-
+
F6
275A
82559 B
To Charge Battery:
· Be sure battery pack is connected before charging batteries.
· Open battery pack compartment. Compartment must remain
open for the entire charging cycle.
· Remove battery vent caps and check battery acid level. If
necessary, add only enough distilled water to cover the plates.
· Do not overfill prior to charge cycle.
· Replace battery vent caps.
· Connect the battery charger to a grounded AC circuit.
Batteries (4):
Group GC2
Batteries
Nominal
Voltage: 6V
Capacity
(20 hour rate):
225AH
Dimensions
(l x w x h):
10 5 16 in x
7 1 16 in x
117 8 in
Maximum allowable side force
on platform:
150 lbs / 667 N.
Maximum allowable wind speed:
28 mph / 12.5 m/sec.
97887 B
82657 B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
7
GENIE® WARNING DECALS
GN28161
Crush Hazard Hand
WARNING
Crush Hazard
Contact with moving parts can
result in death or serious
injury.
Keep away from moving parts.
GN28175
GN28177
Compartment Access
Crush Hazard
WARNING
Compartment access
is restricted.
Contact with
components under
any cover may result
in serious injury.
28175 H
WARNING
Crush Hazard
Death or serious
injury may result
from platform
crushing
personnel
against boom.
Only trained maintenance personnel
should access compartments. Access
by operator is only advised when
performing Pre-operation Inspection. All
compartments must remain closed and
secured during operation.
Keep away from
path of moving
platform.
28177 C
28161 C
GN28236
Improper Operation
GN52865
Annual Inspection
WARNING
Annual Inspection Record
Failure to complete required inspections
could result in death or serious injury.
AB01234
Description
Scheduled maintenance Use the maintenance
inspection report in the
inspections must be
completed as specified in service manual for required
recordkeeping. Keep
the appropriate serviceAB01234
records on all inspections
manual.
Description
Use this decal to record for four years.
Maintenance inspections
the date of the annual
inspection, the initials of must be completed by a
person trained and qualified
the inspector and the
on the maintenance of this
machine owner.
machine.
52865 B
Model
Serial number
Date of
Inspection
Inspected
by
Machine
Owner
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
8
1-877-JLG-LIFT | www.jlg.com
GENIE® MISCELLANEOUS
SAFETYSAFETY
DECALSDECALS
DECALS
GN28164
Hazardous Materials
NOTICE
One or more of the
following hazardous
materials are used on
this machine:
· Gasoline
· Liquid Petroleum Gas (LPG)
· Diesel Fuel
· Hydraulic Fluid
· Antifreeze
· Engine Oil
· Grease
· Lead Acid Battery
GN28176
Manual Not Here
If Safety Manual,
Operator’s Manual
or Responsibilities
Manual are missing,
contact local Genie
distributor or Genie
Industries.
Operate Instructions
Tire Size:
12 x 4 ½ 8 in
GN43619
Safety Arm
Castle Nut Torque:
300 ft/lbs (407 Nm)
Safety Arm
Be sure cotter pin is
properly installed.
43619 017A
43093 B
28176 D
28164 116C
GN43647
GN43093
Tire Specs
GN44753
LED Readout
GN52494
Crush Hazard Rails
CAUTION
LED Diagnostic Readout
Crushing Hazard
Falling guard rails
could cause
injury.
52494 B
Maintain firm grasp on
platform rails when pulling
snap pins. Do not allow
platform guard rails to fall.
Refer to the appropriate
Genie service manual
for code descriptions.
44753 017A
GN82567
Ground Control Panel
GN82366
Chevron Rando
GN82239
Latch
GN65052
Fault Codes
ECM Fault Codes
Code Condition
-Condition Normal
01
Internal ECM Error
02
ECM/Platform Communication Error
03
Undefined Platform Dip Switch Setting
12
Chassis Up/Down Toggle Closed at Startup
18
Pothole Guard failure
42
Platform Left Turn Switch Fault
43
Platform Right Turn Switch Fault
46
Platform Drive Enable Switch Fault
47
Platform Joystick Fault
52
Forward Coil Fault
53
Reverse Coil Fault
54
Up Coil Fault
55
Down Coil Fault
56
Right Coil Fault
57
Left Coil Fault
58
Brake Coil Fault
59
Parallel/Series Coil Fault
68
Low Battery Voltage
LL
Off-Level
OL
Overload Putout Option
For more information, please consult the
appropriate Genie Service Manual.
65052 G
LATCH
Chevron
Rando® HD
equivalent
only
7 AMP
82239 A
Call Genie Industries for list of
equivalent and optional oils.
82366 C
GN82447
Auxiliary Lowering
Auxiliary
Lowering
82447 B
STOP
82567 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
9
JLG CAPACITY DECALS
1701645
500lb Max Capacity
+
100 lb/450 N
MAX
=
500 lbs
230 kg
UNRESTRICTED CAPACITY
500lb Capacity
500lb Capacity
CAPACITY
500 LBS UNRESTRICTED
500 lbs
230 kg
MAX
DOM
1702966
1701645 E
1703469
1703470
Max Tire Load
1703472
Max Tire Load
1703486
Max Tire Load
MAX
7870 kg
17350 lbs
1703493
Max Tire Load
MAX
3583 kg
7900 lbs
1703482 C
1703475
1703472 B
1703488
Max Tire Load
MAX
9163 kg
20200 lbs
Max Tire Load
MAX
6441 kg
14200 lbs
1703470 B
1703469 B
1703482
1703475
Max Tire Load
MAX
5352 kg
11800 lbs
MAX
5216 kg
11500 lbs
Max Wheel Load
MAX
1996 kg
4400 lbs
MAX
2767 kg
6100 lbs
1703486
1703488
1703493
1703868
1703694
Capacity 1932E2
Capacity
MAX.=
750 LB/
340 kg
1702966
1702688
MAX.=
500 LB/
230 kg
MAX.=
500 LB/
230 kg
MAX.=
250 LB/
110 kg
MAX.=
250 LB/
110 kg
MAX.=
250 LB/
110 kg
MAX. =
110 LBS/
500 N
1703694B
MAX. =
100 LBS/
450 N
1703868A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
10
1-877-JLG-LIFT | www.jlg.com
JLG CAPACITY
SAFETY DECALS
DECALS
1703870
1703960
Wheel Load 1932E2
Max Wheel Load
1703996
MAX
8054 kg
17,755 lbs
MAX
••
230 kg / 500 lbs MAX
1703996 B
•
• •
480 kg
1050 lbs
500lb/230kg Max Capacity
••
1703870A
1703960 B
1704201
1704399
Capacity (ANSI)
Tire Max
··
··
··
··
1660 LBS
755 Kg.
MAX.=
250 LB/
110 kg
M
AX
1050 LBS
1704134C
480 Kg.
MAX. =
105 LBS/
465 N
··
··
MA X
Wheel Load 1932E2
MAX.=
450 LB/
200 kg
··
MAX.=
700 LB/
315 kg
··
1704134
1704399A
1704201A
1704540
1704445
1704401
1704403
··
··
·
·
·
·
1704401A
860 Kg.
··
M
AX
1900 LBS
·
·
·
MA X
Wheel Load 3246E2
··
Wheel Load 2032E2 (CE)
Storage Capacity
Max Tire Load
MAX
3130 kg
6900 lbs
60 LBS
27 KG
MAX
1704403A
1704445
1704559
1704752
Max Tire Load
1704827
Max Tire Load 7200lb
MAX
2600 lbs
1180 kg
1704559A
1704828
Max Tire Load 6200lb
MAX
7200 lbs
3266 kg
Max Tire Load 8350lb
MAX
3788 kg
8350 lbs
MAX
2812 kg
6200 lbs
1704752 B
1704540 A
1704827 A
1704828 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
11
JLG CAPACITY DECALS
1705020
Capacity (2250lb-1020kg)(EXT)
1704829
MAX.=2250 LB/ 1020 kg
Max Tire Load 7200 lb
MAX
3266 kg
7200 lbs
MAX.=
500 LB/
227 kg
1704829 A
MAX. =
335 LBS/
1490 N
1705020C
1705042
1705021
1705059
Max Load (Jacks)
Capacity (1500lb-681kg)(EXT)
MAX.=1500 LB/680 kg
MAX.=
500 LB/
227 kg
MAX. =
300 LBS/
1335 N
1705021A
1705167
1705178
26250lb Max Tire Load
Max Tire Load 25000lb
Dual Capacity 500lb (DOM)MTB
MAX.
4400 lbs.
1995 kg.
MAX
365 kg
800 lbs
1705059
1705042A
1705181
Dual Capacity 1200SJP
MAX
25000 lbs
11340 kg
MAX
26,250 lbs
11,907 kg
+
500 lbs/
230 kg
UNRESTRICTED CAPACITY
100 lb/450 N
MAX
+
=
1000 lbs/
450 kg
1705181 C
1705178 A
1705167 B
1705639
1705638
Capacity (800lb-363kg)
Capacity (5500lb-230kg)
MAX CAPACITY 800 lbs/ 363 kg=
MAX CAPACITY 500 lbs/ 227 kg
+
=
250 lbs/113 kg
=
+
+
+ =
800 lb/363 kg
=
500 lbs/227 kg
MAX
100 lb/445 N
1705638 A
+
=
250 lb/113 kg
MAX
120 lb/533 N
1705639 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
12
1-877-JLG-LIFT | www.jlg.com
JLG CAPACITY
SAFETY DECALS
DECALS
1705640
1705641
Capacity (1000lb-454kg)
Capacity (1000lb-454kg)
+
MAX CAPACITY 1000 lbs/454 kg=
Zone A
+ =
1000 lb/454 kg
Zone B
MAX CAPACITY
+
MAX
150 lb/667 N
=
250 lb/113 kg
1000 lbs/454 kg=
+
1705640 A
+
=
+
Tire Load (1365lb/620kg)
1705647 B
+
=
250 lbs/
113 kg
26’
7.9 M
MAX
32’
9.68 M
MAX
MAX CAPACITY 500 lbs/ 227 kg
+
+
=
250 lbs/113 kg
=
500 lbs/227 kg
MAX
100 lb/445 N
620 kg
1705880
Capacity (500lb/227kg/800lb/360kg)
Zone A
Zone B
MAX CAPACITY
800 lbs/363 kg=
+
=
800 lbs/363 kg=
+
+
=
500 lbs/227 kg
+
=
=
+
+
=
250 lbs/
113 kg
26’
7.9 M
MAX
MAX CAPACITY
500 lbs/227 kg=
+
=
500 lbs/227 kg
800 lbs/363 kg
+
20’
6.1 M
MAX
+
=
250 lbs/
113 kg
+
20’
6.1 M
MAX
=
250 lbs/
113 kg
26’
7.9 M
MAX
MAX =120 LB/533 N
MAX = 100 LB/445 N
1705941B
1705880B
250 lbs/
113 kg
Zone B
MAX CAPACITY
MAX CAPACITY
500 lbs/227 kg=
+
800 lbs/363 kg
MAX = 105 LB/467 N
1705941
Capacity (500lb/227kg/800lb/363kg)
Zone A
1705641D
1705699 A
MAX =150 LB/667 N
+
=
=
MTB 500lb Capacity (1930)
MAX
1365 lbs
+
700 lbs/317 kg
250 lbs/
113 kg
1705699
700 lbs/317 kg=
+
1000 lbs/454 kg
1705647
MAX CAPACITY
MAX =120 LB/533 N
MAX = 100 LB/445 N
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
13
JLG CAPACITY DECALS
1706106
1705978
1706107
Capacity MTB T350
230kg Capacity
=
+
Capacity Platform T350
=
=
440 lbs/200 kg
UNRESTRICTED CAPACITY
230kg MAX
+ 70kg
=
1705978 A
=
UNRESTRICTED CAPACITY
=
=
+
=
500 lbs/227 kg
500 lbs/227 kg
12.5 m/s MAX
400N MAX
+
+
440 lbs/200 kg
UNRESTRICTED CAPACITY
100 lb/450 N
MAX
1706107D
UNRESTRICTED CAPACITY
1706106C
1706671
1706126
1230ES Wheel Load
1706310
1706311
Tire Load (1835lb/832kg)
MAX
3720 kg
8200 lbs
MAX
2070 lbs
1706310 A
MAX
1835 lbs
Tire Load (2070lb/939kg)
832 kg
MAX
400 kg
880 lbs
1706311 A
Max Tire Load
939 kg
1706126 A
1706671E
1707013
500lb Max Capacity 600SJ
1706942
Max Tire Load
!
WARNING
TIP-OVER HAZARD
MAX
8500 lbs
3860 kg
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
+
100 lb/450 N
MAX
1706942 A
=
500 lbs
230 kg
UNRESTRICTED CAPACITY
500 lbs
230 kg
MAX
DOM
1707013 B
1707014
Dual Capacity
!
1707055
WARNING
500lb Capacity
TIP-OVER HAZARD
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
+
500 lbs
230 kg
=
+
1000 lbs
450 kg
MAX
UNRESTRICTED CAPACITY
100 lb/450 N
MAX
DOM
+
=
1000 lbs
450 kg
500 lbs
230 kg
100 lb/450 N
MAX
CAN
MAX
=
500 lbs
230 kg
UNRESTRICTED CAPACITY/
CAPACITÉ NON RESTREINTE
500 lbs
230 kg
MAX
1707055 C
1707014 B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
14
1-877-JLG-LIFT | www.jlg.com
JLG CAPACITY
SAFETY DECALS
DECALS
3252694
3252689
Capacity (800lb-365kg)
Capacity
MAX.=
1250 LB/
568 kg
MAX.=
950 LB/
432 kg
MAX.=
800 LB/
365 kg
MAX.=
300 LB/
136 kg
MAX.=
550 LB/
250 kg
MAX.=
250 LB/
115 kg
MAX. =
120 LBS/
534 N
MAX. =
187 LBS/
832 N
3252694B
3252689A
3252752
3252751
Capacity (EXT Deck) C/D/L/B/J
Capacity (EXT Deck) C/D/L/B/J
MAX.=
1250 LB/
565 kg
MAX.=
750 LB/
340 kg
MAX.=
250 LB/
115 kg
MAX.=
750 LB/
340 kg
MAX.=
500 LB/
225 kg
MAX.=
500 LB/
225 kg
MAX. =
225 LBS/
1000 N
MAX. =
150 LBS/
667 N
3252752A
3252751A
4105262
Boom Angle Indicator
1001121801
4105262D
Max Capacity 500lb/227kg
+
100 lb/445 N
MAX
ANSI
=
500 lbs
227 kg
500 lbs
227 kg
MAX
UNRESTRICTED CAPACITY
1001121801 A
1001121803
Max Capacity 500lb/227kg
+
100 lb/445 N
MAX
CAN
=
500 lbs
227 kg
UNRESTRICTED CAPACITY/
CAPACITÉ NON RESTREINTE
500 lbs
227 kg
MAX
1001121803 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
15
JLG CAUTION DECALS
1702294
No Hands
1702868
!
CAUTION
NO HANDS OR LANYARD
PLACING HAND HERE MAY RESULT
IN MINOR OR MODERATE INJURY.
1702868 B
No Hands
1704000
!
NO HANDS OR LANYARD
!
TENIR MAINS ET
SANGLES A L ECART.
Placing hand here may result in
MINOR OR MODERATE INJURY.
Placer les mains a cet endroit peut provoquer
DES BLESSURES MINEURES OU BENIGNES.
1704000 C
No Hands (CAN)
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
16
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1702387
Platform Display
1702565
1702564
500 LB
Drive Steer
Stop
1000 LB
1702565 B
1702387 H
1702566
1702567
Lift, Swing
Function Speed
1702567 B
1702566 B
1702610
Ground Control Display
1702676
Horn
1702676 D
1702610 C
1702784
Legend
Drive
Select
Steer
Select
Platform
Level
Chassis
Out of
Level
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
Tower
Telescope
Engine
Distress
Articulating
Fly Boom
Low Fuel
Level
AC
Generator
ON
Glow Plug
Indicator
Enable
Indicator
Power
Emergency
Stop
Main
Telescope
Fuel Select
Soft
Touch
Override
Soft
Touch
Indicator
Drive
Start
Auxiliary
Power
Steer
1702784 F
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
17
JLG CONTROL PANEL DECALS
1703084
Platform Display (CE)
1703078
Legend
230 KG
Platform
Up
Down
Chassis
Out of
Level
Power
Emergency
Stop
Engine
Distress
Deck
Extension
Steer
Drive
Start
Glow Plug/
Choke
Axle
Lock
1701510
450 KG
High
Speed
Drive
Low
Speed
Drive
1703078
1703084 E
1703465
MTB
1703678
1703689
Horn, Drive Speed, Level
Horn, Drive Speed, Level
1703678-B
1703689 B
1703695
Legend
!
Platform
Up
Down
Deck
Extension
Chassis
Out of
Level
Power
Emergency
Stop
High
Speed
Drive
Steer
Drive
Low
Speed
Drive
1703695C
1703465 G
1703706
Ground Control
1703808
Legend, MTB
Start
Auxiliary
Power
1704192
Power
Emergency
Stop
Battery
Charging
Condition
Engine
Coolant
Temperature
Engine
Intake
Air Filter
Hydraulic
Oil
Filter
Glow Plug
Indicator
Platform
Control
Off
Ground
Control
Engine
Oil
Pressure
Engine
Oil
Temperature
Transmission
Oil
Filter
Low Fuel
Level
Engine
Malfunction
Indicator
Stop
1703808 C
1703706B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
18
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1704239
1704252
Platform Display
Legend (MTB)
!
-PowerEmergency
Stop
1704240
Horn and Positrack
Platform
Control Off
Ground
- +
Articulating
Fly Boom
1704239 H
Jib
Swing
Main
Tele
Main
Lift
1704253
Legend (Platform)
!
System
Fault
Traction
Control
Jib
Swing
Main
Lift
Steer
Select
Platform
Level
Chassis
Out of
Level
Swing
Function
Speed
Control
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
Engine
Distress
Low Fuel
Level
Tower
Telescope
Jib
Lift
Main
Telescope
AC
Generator
ON
Glow Plug
Indicator
Enable
Indicator
Fuel Select
Soft
Touch
Override
Soft Touch
Indicator
Power
Emergency
Stop
Drive
Generator
Enable
Rotate
Steer
1704253 D
Level
Drive
1704465
Steer
MTB 400S
Swing
1704460
Drive & Steer
Tower
Lift
Engine
Distress
Generator
Start
1704252-C
1704465 C
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
19
JLG CONTROL PANEL DECALS
1704480
Legend
1704484
Platform Display (DOM)
POWER
EMERGENCY
STOP
500 LB
AUXILIARY
POWER
ENGINE
DISTRESS
F
1000 LB
E
START
1704484 F
ENGINE
SPEED
WHEEL
DRIVE
HIGH
1704485
SPEED
LOW
Platform Display
HORN
F
LIGHTS
FUNCTION
ENABLE
E
!
1704485 F
TILT
STEER
REAR
STEER
1704487
Platform Display (DOM) (750lbs)
LIFT
750 LB
PLATFORM
EXTEND/
RETRACT
F
1000 LB
PLATFORM
EXTENSION
SELECT
E
1704487 F
HYDRAULIC
LEVELING
JACKS
1704502
Symbol Legend for Crawler
Drive
Select
Drive
Disable
Platform
Level
Chassis
Out of
Level
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
500 LB
Creep
Tower
Lift
1000 LB
Platform
Capacity
Indicator
Tower
Telescope
Engine
Distress
Articulating
Fly Boom
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Enable
Indicator
Soft
Touch
Override
Soft Touch
Indicator
Power
Emergency
Stop
Counter
Rotate
Start
Auxiliary
Power
Drive
Steer
1704502 C
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
20
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
SAFETY
PANEL DECALS
DECALS
1704707
1704952
Platform Display (DOM)
Platform Display
230
500KG
LB
F
500 LB MAX
230 KG MAX
1000
450 KG
LB
1000 LB MAX
450 KG MAX
!
E
1704952 E
1704707 D
1704993
Light Panel 750lb (DOM)
1704997
Stop
F
500 LB MAX
230 KG MAX
750 LB MAX
340 KG MAX
!
1704997 B
E
1704993 D
1705015
Legend
Drive
Select
Steer
Select
Platform
Level
Chassis
Out of
Level
Creep
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
Platform
Out of
Level
1705170
Headlight
Platform
Capacity
Indicator
!
Cable
Break
Engine
Distress
Low Fuel
Level
Exceeding
Operating
Radius
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Enable
Indicator
Soft
Touch
Override
Soft Touch
Indicator
Start
Power
Emergency
Stop
Auxiliary
Power
Drive
Steer
1705015 B
1705173
1705171
Platform Display (DOM)
Jib Stow
F
500 lb MAX
230 kg MAX
!
1705170 A
1705171 A
!
1000 lb MAX
450 kg MAX
!
E
1705173 C
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
21
JLG CONTROL PANEL DECALS
1705175
Function Speed
1705174
Stop
1705175 B
500 lb
230 kg
MAX
1000 lb
450 kg
MAX
1705174 C
1705190
Legend (ENG)
1705212
Light Display (CE)
POWER
EMERGENCY
STOP
!
SYSTEM
DISTRESS
TILT
!
AUXILIARY
POWER
1705212 D
START
HIGH
SPEED
LOW
HORN
AC
GENERATOR
ON
STEER
1705309
Platform Legend 1350SJP
Drive
Select
Main
Lift
Steer
Select
Platform
Level
Swing
Function
Speed
Control
Chassis
Out of
Level
Platform
Rotate
Platform
Capacity
Indicator
Creep
Platform
Out of
Level
!
Engine
Distress
Cable
Break
Axle
Set
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Axle
Extend
Retract
Glow Plug
Indicator
Soft
Touch
Override
Enable
Indicator
Jib
Swing
Start
Power
Emergency
Stop
Auxiliary
Power
Drive
!
Steer
Drive
Orientation
System
Jib Lift
Boom
Control
System
Jib Stow
Override
1705309 C
DRIVE
LIFT
1705686
LEVELING
JACK ENABLE
LEVELING
JACKS SET
LEVELING JACKS
RETRACTED
PLATFORM
EXTEND/
RETRACT
PLATFORM
EXTENSION
SELECT
1705190A
Legend (1930ES)
1705351
Drive/Steer Instruction (DOM)
!
Yellow light
indicates the
machine may Drive/Steer in the
opposite direction from
movement of controls.
!
1705429
POWER
EMERGENCY
STOP
Drive/Steer Instruction (ENG/FR)
!
!
!
!
Match black and white
direction arrows on both
platform control panel
and the chassis to
determine the direction
the machine will travel.
Push and release Drive
Orientation Override
switch. Within 3 seconds
slowly move the Drive/Steer
control toward the arrow
matching the intended
direction of machine travel.
SYSTEM
FAULT
TILT
STEER
DRIVE
1705351 B
LIFT
1705686 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
22
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1705745
Function Speed
1705744
Horn
1705745 C
1705744 A
1705753
MTB CE (800A)
1705911
Nameplate/Load
1705753 B
!
!
1705911B
1705912
Platform Box
1705912B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
23
JLG CONTROL PANEL DECALS
1705913
1705914
Platform Display
Platform Box
!
1705913B
1705914B
1705947
1705948
Platform Display
Platform Box
!
1705947B
1705948B
1705950
Platform Box
1705973
Platform Display 1250AJ
!
- +
!
500 lb MAX
230 kg MAX
!
+
!
1000 lb MAX
450 kg MAX
F
!
½
!
E
1705973 D
1705950E
1706108
Legend Platform T350
!
System
Distress
Leveling
Jacks Set
!
Chassis
Out of
Level
Function
Enable
1706108B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
24
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1706708
Legend (Platform)
Main
Lift
Chassis
Out of
Level
Platform
Level
Steer
Select
Drive
Select
Function
Speed
Control
Swing
Platform
Rotate
F
Platform
Capacity
Indicator
Creep
Engine
Distress
Fuel
Level
AC
Generator
ON
Glow Plug
Indicator
Enable
Indicator
Power
Emergency
Stop
Main
Telescope
Fuel Select
Soft
Touch
Override
Soft
Touch
Indicator
Drive
E
Tower
Telescope
Tower
Lift
½
Articulating
Fly Boom
Start
Auxiliary
Power
Steer
1706708 B
1706712
Display Panel (MTB)
1706709
Legend (MTB)
Start
Power
Emergency
Stop
Battery
Charging
Condition
Engine
Coolant
Temperature
Engine
Intake
Air Filter
Hydraulic
Oil
Filter
Glow Plug
Indicator
Platform
Control
Off
Ground
Control
Engine
Oil
Pressure
Engine
Oil
Temperature
Transmission
Oil
Filter
Low Fuel
Level
Engine
Malfunction
Indicator
Auxiliary
Power
1706709 A
1706712 D
1706751
Legend
Main
Lift
Swing
Axle
Set
1706751A
Steer
Select
Drive
Select
Platform
Level
Function
Speed
Control
Tilt
Warning
Platform
Rotate
!
Platform
Capacity
Indicator
System
Distress
Level
System
Fault
!
Cable
Service
Creep
Boom
Control
Select
Fuel
Level
Main
Telescope
AC
Generator
ON
Axle
Extend
Retract
Tower
Lift
Glow Plug
Indicator
to
( Wait
start )
Drive
Orientation
System
Enable
Indicator
Jib
Swing
!
Boom
Control
System
Warning
Drive
Steer
Jib Stow
Override
Power
Emergency
Stop
Jib Lift
Start
Auxiliary
Power
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
25
JLG CONTROL PANEL DECALS
1706914
1706926
MTB
User Flash Codes
FLASH CODES
1
Flash
Sequence error:
release all switches.
Wait 5 seconds, activate
enable switch then
function switch.
!
Lift up and extend boom
prevented: telescope in,
lower boom, then reset
outriggers.
!
2
Outrigger movement
Flashes prevented: retract
and lower boom, then
activate outriggers.
Push Emergency Stop
to shut machine off.
Wait 5 seconds and
4
Flashes restart machine.
!
!
Electric Powered:
Batteries may need
recharged.
Engine Powered:
5
Flashes Shut off and wait 5
seconds. Restart engine.
Check fuel and oil level
if conditions persist.
1706926A
1706914 A
1706931
Legend
Drive
Select
Steer
Select
Platform
Level
Chassis
Out of
Level
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
Tower
Telescope
Engine
Distress
Articulating
Fly Boom
Low Fuel
Level
AC
Generator
ON
Glow Plug
Indicator
Enable
Indicator
Power
Emergency
Stop
Main
Telescope
Fuel Select
Soft
Touch
Override
Soft
Touch
Indicator
Drive
Start
Auxiliary
Power
Steer
1706931 B
1706941
Legend MTB
Start
Auxiliary
Power
Power
Emergency
Stop
Battery
Charging
Condition
Engine
Coolant
Temperature
Glow Plug
Indicator
Platform
Control
Off
Ground
Control
Engine
Oil
Pressure
Engine
Oil
Temperature
Transmission
Oil
Filter
Function
Enable
Engine
Malfunction
Indicator
Low Fuel
Level
1706941 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
26
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1706946
1706950
MTB
Legend MTB
-PowerEmergency
Stop
Platform
Control Off
Ground
Articulating
Fly Boom
Jib
Swing
Main
Tele
Main
Lift
Rotate
Level
Drive
Steer
1706946 A
Swing
Tower
Lift
Engine
Distress
Generator
Start
Function
Enable
1706950 A
1707110
Legend Platform
Drive
Select
Main
Lift
Steer
Select
Platform
Level
Swing
Function
Speed
Control
Chassis
Out of
Level
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
Tower
Telescope
Engine
Distress
Articulating
Fly Boom
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Soft
Touch
Override
Enable
Indicator
Power
Emergency
Stop
Soft
Touch
Indicator
Drive
Start
Auxiliary
Power
BOOM
MALFUNCTION
Steer
1707110 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
27
JLG CONTROL PANEL DECALS
1707113
1707111
Platform Display (EURO)
Platform Display (DOM)
450 KG
500 LB MAX
230 KG MAX
1000 LB MAX
450 KG MAX
1707111 D
3252542
1707113 D
3252602
Controller Lid
Box Lid w/ Tilt & BD
3252542
!
3252620
Controller Box Lid
!
3252602 E
4107462
Side Console
4107462C
3252620 B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
28
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1001091272
Icon (DOM)
4110188
!
Overlay LH
- +
RUN-OVER
HAZARD
could cause
death or
serious
injury.
1001102601
1706304A
Operator must be trained and
must read and understand
all capacity charts, operator
and safety manuals.
Fasten
seat
belt.
1706303A
1706767A
MTB 600S
4110188D
1001107527
Stop
1001107527 A
1001102601 B
1001107849
1001107850
Platform Display
Platform Display
500 LB MAX
230 KG MAX
!
1000 LB MAX
450 KG MAX
750 LB MAX
340 KG MAX
F
½
!
!
E
1001107849 D
1000 LB MAX
450 KG MAX
F
½
!
E
1001107850 D
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
29
JLG CONTROL PANEL DECALS
1001107853
1001107851
Platform Display
Platform Display
F
½
!
!
!
!
E
!
1001107851 D
1001107926
1001107853 D
1001107927
Platform Display
Platform Display
!
!
230
230KG
KG
!
!
1000 LB MAX
450 KG MAX
1001107926 C
1001107952
!
500 LB MAX
230 KG MAX
!
1001107927 D
1001107953
Platform Display (CE)
Platform Display (860SJ)
500 lb MAX
230 kg MAX
F
!
!
½
!
!
750 lb MAX
340 kg MAX
E
1001107952 C
F
!
½
!
E
1001107953 C
1001107954
Platform Display 800S
500 lb MAX
230 kg MAX
!
1000 lb MAX
450 kg MAX
F
!
½
!
E
1001107954 C
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
30
1-877-JLG-LIFT | www.jlg.com
JLG CONTROLSAFETY
PANEL DECALS
DECALS
1001108492
Legend (Platform) 400S
Drive
Select
Main
Lift
Steer
Select
Swing
Platform
Level
Function
Speed
Control
Chassis
Out of
Level
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
!
Tower
Telescope
System
Distress
F
Fuel
Level
½
E
Articulating
Fly Boom
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Soft
Touch
Override
Enable
Indicator
Power
Emergency
Stop
Soft
Touch
Indicator
Drive
Start
Auxiliary
Power
!
Steer
Drive
Orientation
1001108492 A
1001108493
Legend (Platform) 450A/450AJ/510AJ/600A/600S
Drive
Select
Steer
Select
Platform
Level
Chassis
Out of
Level
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
!
Tower
Telescope
System
Distress
Articulating
Fly Boom
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Soft
Touch
Override
Enable
Indicator
Power
Emergency
Stop
Soft
Touch
Indicator
Drive
Start
Auxiliary
Power
Steer
!
Drive
Orientation
1001108493 A
1001108494
Legend (Platform) 600SC
Drive
Select
Drive
Disable
Platform
Level
Chassis
Out of
Level
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
!
Tower
Telescope
System
Distress
Articulating
Fly Boom
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Soft
Touch
Override
Enable
Indicator
Power
Emergency
Stop
Soft
Touch
Indicator
Counter
Rotate
Start
Auxiliary
Power
Drive
Steer
!
Drive
Orientation
1001108494 A
1001108495
Legend (Platform) 740AJ/800A/800AJ
Drive
Select
Main
Lift
Steer
Select
Platform
Level
Swing
Function
Speed
Control
Chassis
Out of
Level
Platform
Rotate
Creep
Tower
Lift
Platform
Capacity
Indicator
Tower
Telescope
!
System
Distress
Articulating
Fly Boom
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Fuel Select
Glow Plug
Indicator
Soft
Touch
Override
Enable
Indicator
Soft
Touch
Indicator
Power
Emergency
Stop
Drive
Start
Auxiliary
Power
Steer
BOOM
MALFUNCTION
!
Drive
Orientation
1001108495 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
31
JLG CONTROL PANEL DECALS
1001108496
Legend (Platform) 800S
Drive
Select
Steer
Select
Platform
Level
Chassis
Out of
Level
Creep
Main
Lift
Swing
Function
Speed
Control
Platform
Rotate
Platform
Out of
Level
Platform
Capacity
Indicator
!
!
System
Distress
Exceeding
Operating
Radius
Cable
Break
1001110226
Low Fuel
Level
Main
Telescope
AC
Generator
ON
Glow Plug
Indicator
Soft
Touch
Override
Fuel Select
Enable
Indicator
Power
Emergency
Stop
Soft
Touch
Indicator
Drive
Start
Auxiliary
Power
Steer
!
Drive
Orientation
1001108496 A
1001121657
Light Display
Platform Display
!
!
230
230KG
KG
!
- +
!
500 LB MAX
227 KG MAX
1000 LB MAX
454 KG MAX
!
1001121657 B
1001110226B
1001122384
Light Panel (Platform)
1001131168
500 lb MAX
227 kg MAX
!
!
1000 lb MAX
454 kg MAX
Stop & Auxillary Power
F
!
½
!
1001131168 B
E
1001122384 B
1001132175
Stop & Generator
1001132175 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
32
1-877-JLG-LIFT | www.jlg.com
JLG COMSETIC
SAFETY DECALS
DECALS
1703681
JLG
1702861
JLG Lift 8”
R
1704789
1705460
E450AJ
Sky Power
E450AJ
R
1704789-A
1705754
1705781
JLG 3.5”
JLG 2.75”
1706667
1705864
1230ES
1230ES
JLG 12”
R
www.jlg.com
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
33
JLG COSMETIC DECALS
3252598
3252598B
Model Tag 1932E2
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
34
1-877-JLG-LIFT | www.jlg.com
JLG DANGER
SAFETY DECALS
DECALS
1703823
1703805
Electrocution Hazard
Electrocution
!
DANGER
DANGER
ELECTROCUTION HAZARD
• This machine is not insulated.
• Maintain a clearance of at least 10FT.(3M)
between any part of machine or load and
any electrical lines or apparatus.
• This machine is not insulated.
• Maintain a clearance of at least 10FT.(3M)
between any part of machine or load
and any electrical lines or apparatus.
Failure to follow instructions will
result in death or serious injury.
Failure to follow instructions will result
in death or serious injury.
1703805 D
1705681
1703936
Electrocution
Danger (CAN)
!
DANGER
ELECTROCUTION HAZARD
!
ELECTROCUTION HAZARD
RISQUE D'ÉLECTROCUTION
Cette machine n'est pas isolée.
Maintain a clearance of at least 10FT.(3M)
between any part of machine or load and
any electrical lines or apparatus.
Maintenir une distance d'au moins
3 m (10 ft.) entre la machine ou sa charge
et tout appareil ou ligne électrique.
Failure to follow instructions will
result in death or serious injury.
DANGER
DANGER
This machine is not insulated.
CAN
1703823 B
• This machine is not insulated.
• Maintain a clearance of at least 10FT.(3M) between
any part of machine or load and any electrical lines
or apparatus.
Failure to follow instructions will result in death
or serious injury.
Le non-respect de ces instructions
provoquera des blessures graves,
voire mortelles.
1703936 C
1705681 C
1706128
1705695
Electrocution
Electrocution 1930ES
!
DANGER
DANGER
ELECTROCUTION HAZARD
insulated.
• This machine is not insulated.
• Maintain a clearance of at least 10FT.(3M)
between any part of machine or load
and any electrical lines or apparatus.
• Maintain a clearance
of at least 10 ft.
between any part of
machine or load
and any electrical
line or apparatus.
Failure to follow instructions will result
in death or serious injury.
1705695 B
ELECTROCUTION
HAZARD
• This machine is not
Failure to follow
instructions will
result in death or
serious injury.
1706128E
1706832
1230ES Electrocution
DANGER
ELECTROCUTION HAZARD
• This machine is not insulated.
• Maintain a clearance of at least 10FT.(3M)
between any part of machine or load
and any electrical lines or apparatus.
Failure to follow instructions will result
in death or serious injury.
1706832 B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
35
JLG ILLUSTRATION/PICTORAL DECALS
1701499
1701500
No Tie Down/Lift
1701504
Lift Here
Hydraulic Oil
1701502
1701500
Hydraulic Oil Level (High)
1701499B
1701505
1701518
Diesel
Crushing
1701509
1701529
Manual
Arrow
1701529 A
1701509 B
1701518 A
1701640
1701644
Manual
Battery Charger
1702155
Battery Disconnect
1701542
Gasoline
_
+
1702155
1701644
1701640
1703162
1703072
Fan Blade
1703687
1703697
Arrow
Safety Prop
1703687 B
1703697A
No Forklift
1703072
1703162 B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
36
1-877-JLG-LIFT | www.jlg.com
JLG ILLUSTRATION/PICTORAL
SAFETY DECALS
DECALS
1703814
1703817
Tie Down
Fork Lift
1703819
Direction Arrow
1703819B
1703817A
1703814A
1704260
1704125
EMS (Euro Requirement)
Air Lead
1704016
1703822
300 psi
20.7 bar
MAX
Forklift Location
Manual Descent Instructions
1704016 C
1703822A
1704260-B
1704125 A
1704726
1704277
1704277 A
1705096
Lift Diagram (1200/1350)
1704726 A
Lock Latch
Lanyard Attachment
TO
HU B
RQ
UE
RQ
UE
TO
R
HU B
10’9”/3.28 m
7’10”/2.39 m
18’7”/5.66 m
HU B
27’9"/8.46 m (1350SJP / 1100SB)
TO
RQ
UE
RQ
UE
TO
Manual Descent
10’0”/3.05 m
R
1705016
HU B
11’2”/3.40 m
23’9”/7.24 m (1200SJP)
38’11”/11.86 m (1350SJP / 1100SB)
34’11”/10.64m (1200SJP)
1705096 E
1705016 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
37
JLG ILLUSTRATION/PICTORAL DECALS
1705692
Control Box Location
1706100
Gooseneck 10
1705828
Footswitch (CE)
1705693
1705693 A
Safety Prop
1705828 B
1705692 A
1706170
Gooseneck 6
1706350
1706670
Cover
1706263
1230ES Manual Descent
Brake Set
1706263B
P
P
1706670 A
1706350_B
3251102
3252768
Generator
1706741
Lift Diagram 450A (DOM)
Boom Control Select
510AJ
64.3 in
450AJ
450A
SERIES II SERIES II
63.1 in
A (1634 mm) (1603 mm)
1706741A
B
47.1 in
(1196 mm)
48.3 in
(1227 mm)
63.2 in
(1605 mm)
48.2 in
(1223 mm)
1702300
R
A
B
4100181
A
B
3252768 C
4108302
Hydrualic Oil
Lift Diagram 800S (DOM)
1702300
CL
3252781
MODELS
1701500
1701500
3251102 B
1702300
CG
Hydraulic Oil Level
C
66” (168cm)
76” (189cm)
57” (145cm)
860SJ
62” (157cm)
80” (203cm)
53” (135cm)
680S
70” (178cm)
72” (183cm)
61” (155cm)
1701500
800S
A
1701500
1702300
1702300
CL
C
B
3252781 C
4100181B
4108302
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
38
1-877-JLG-LIFT | www.jlg.com
JLG ILLUSTRATION/PICTORAL
SAFETY DECALS
DECALS
4110226
Lift Point/Tie Down
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
39
JLG IMPORTANT DECALS
1702265
1702153
Manual Descent
Inspection (DOM)
!
IMPORTANT
1703696
Gradeability
IF THE LOWER BOOM ASSEMBLY
DOES NOT FULLY LOWER:
first
delivery
ANSI requires an annual inspection be
performed by qualified personnel in
accordance with manufacturer’s
specifications.
5 years
8. Repeat steps 4 through 7 if necessary.
Use JLG approved manuals, parts and
procedures. Contact JLG regarding
structural repairs.
7 years
2 years
Stamp frame with MONTH/DAY/YEAR
next to arrow after each inspection.
Retain records in accordance with ANSI.
8 years
Notify JLG immediately of any changes
of ownership.
Replace if defaced
DOM
MAX. 4WD GRADEABILITY
MAX. SIDE SLOPE 5°
35%
1703696A
1702265 C
1704248
Battery Charger Instructions
-
IMPORTANT
+
100%
9 years
-
4 years
WHEN DRIVING WITH THE PLATFORM
COMPLETELY LOWERED DO NOT EXCEED
6 years
1 year
3 years
IMPORTANT
1. Pull out red EMS knob located on ground control.
2. Turn key switch to ground control position.
3. Start the engine (if applicable).
4. Pull and hold out the red re-level knob located
next to the main control valve.
5. Raise the lower boom 6 feet.
6. Release the red re-level knob.
7. Lower the boom fully, and continue to hold down
switch for an additional 5 seconds.
Battery charging instructions.
For maximum battery life:
Avoid completely discharging the batteries.
Fully charge the batteries each day the
machine is used.
Charge the batteries at available times
between full charges.
Ensure that the battery plates are immersed
in battery fluid before charging. However, to
avoid overflow, Do Not fill the fluid level until
after charging.
+
10 years
1702153 D
1. To charge batteries, connect charger to proper
voltage source with 15 AMP minimum capacity.
2. The charge cycle is complete when the 100%
LED is lit. Any other reading indicates that the
charge cycle is not complete. If the abnormal
LED is lit, consult the Operators Manual.
3. The charger will shut off automatically when
the batteries are fully charged.
4. Depleted batteries will take approx.17 hours to
charge.
1704248 B
1705365
1704446
Load Management (BCS)
1704521
Charging Instructions
1704903
Gradeability
IMPORTANT
Battery charging instructions.
For maximum battery life:
Avoid completely discharging the
batteries.
Fully charge the batteries each
day the machine is used.
Charge the batteries at available
times between full charges.
Ensure that the battery plates are
immersed in battery fluid before
charging. However, to avoid overflow, Do Not fill the fluid level until
after charging.
1. To charge batteries, connect charger
to proper voltage source with 15 AMP
minimum capacity.
2. The charge cycle is complete when
100% LED is lit. Any other reading
indicates that the charge cycle is not
complete. If the abnormal LED is lit,
consult the Operators Manual
3. Charger will shut off automatically
when batteries are fully charged.
IMPORTANT
PROCEDURE FOR DAILY CHECK OF BOOM
CONTROL SYSTEM
1. Extend all axles fully.
WHEN DRIVING WITH THE PLATFORM
COMPLETELY LOWERED DO NOT EXCEED
25%
45%
1704521B
2. With the boom fully retracted, raise boom off the boom rest to horizontal.
3. Position jib horizontal, jib straight, and platform level.
4. Extend boom until it stops.
MAX. GRADEABILITY 35%
MAX. SIDE SLOPE 5°
5. Boom must stop on colored stripe matching the capacity indicator. If the boom does
not stop on the correct stripe, system must be repaired by JLG authorized service
personnel before machine can be used.
1704903A
6. Push and hold the gray test switch
on the ground control panel. The lighting of a
green boom control system light
indicates the system is functioning properly. No
indicator light or the lighting of a red boom control system light
indicates the system
!
must be repaired by JLG authorized service personnel before machine
can be used.
1705365 B
3252672
Lift Diagram 400 (DOM)
1001092071
IMPORTANT
LIFTING INSTRUCTIONS
1. See the Operators and Safety Manual for approximate
gross weight of machine as originally manufactured.
2. Place boom in the stowed position with turntable locked
3. Remove all loose items from machine.
4. Properly adjust rigging to prevent damage to machine
and so machine remains level.
LIFT HERE
TIE DOWN INSTRUCTIONS
1. Place boom in the stowed position with turntable locked.
2. Remove all loose items from machine.
3. Secure the chassis and the platform using straps or
chains of adequate strength.
Refer to the Operators and Safety Manual for more information.
CENTER OF GRAVITY
4. Depleted batteries will take approx.
17 hours to charge.
DOM
AT THE BEGINNING OF EACH DAY’S USE, PERFORM CHECK WITH NO
LOAD (PERSONS OR MATERIAL) IN PLATFORM FROM GROUND CONTROL
STATION.
IMPORTANT
FOR DRIVING WITH THE PLATFORM COMPLETELY LOWERED
DO NOT EXCEED
MAX. 2WD GRADEABILITY
MAX. 4WD GRADEABILITY
MAX. SIDE SLOPE 5°
IMPORTANT
Gradeability
1704446-B
TIE DOWN
HERE
No Pipe Racks Allowed
IMPORTANT
No pipe racks/
panel carriers
allowed on
this machine.
1001092071 B
CL ROTATION
TIE DOWN AND
LIFT HERE
TIE DOWN HERE
3252672 B
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
40
1-877-JLG-LIFT | www.jlg.com
JLG INSTRUCTION
SAFETY DECALS
DECALS
1703398
Towing/Winch
1702901
BRAKE RELEASE INSTRUCTIONS
1702908
Manual Descent
WINCHING OR TOWING
Manual Descent
!
MANUAL DESCENT INSTRUCTIONS
FOR THE ARTICULATING JIB
TURN VALVE KNOB COUNTERCLOCKWISE
UNTIL TIGHT.
TO LOWER THE ARTICULATING JIB........
MANUAL DESCENT
INSTRUCTIONS INSIDE
1.
TURN THE KNOB LOCATED ON THE
JIB CYLINDER COUNTERCLOCKWISE.
2.
WHEN MANUAL DESCENT FUNCTION
IS COMPLETED, TURN KNOB ON JIB
CYLINDER CLOCKWISE.
TURN BRAKE CAMS TO HORIZONTAL USING
3/4" WRENCH
3. WINCH OR TOW
A
1702908
1702901
2. RELEASE PARKING BRAKE
1703213
!
1. DISENGAGE DRIVE MOTORS
4. RESET PARKING BRAKE
5. ENGAGE DRIVE MOTORS
TURN BRAKE CAMS TO VERTICAL USING
3/4" WRENCH
TURN VALVE KNOB CLOCKWISE
UNTIL TIGHT.
1703398
1703698
Towing/Wenching-Tow Speed
BRAKE RELEASE INSTRUCTIONS
1704017
WINCHING OR TOWING
TURN VALVE KNOB COUNTERCLOCKWISE
UNTIL TIGHT.
3. WINCH OR TOW
4. RESET PARKING BRAKE
TURN BRAKE CAMS TO VER TICAL USING
3/4" WRENCH
2. RELEASE PARKING BRAKE
Brake Release Instructions
BRAKE RELEASE INSTRUCTIONS – WINCHING OR TOWING
TURN BRAKE CAMS TO HORIZONTAL USING
3/4" WRENCH
1. DISENGAGE DRIVE MOTORS
DISENGAGE BRAKE BEFORE
WINCHING OR TOWINGTOW OR WINCH SLOWLY
2 M.P.H. / 3.2 K.P.H. MAX.
2. RELEASE PARKING BRAKE
5. ENGAGE DRIVE MOTORS
TURN BRAKE CAMS TO HORIZONTAL USING 3/4" WRENCH.
2
Set Parking
Brake
STEP
3
Set
Jack
STEP
4
Uncouple
from tow
vehicle
and disconnect
lights and chains.
STEP
5
Unlatch
Boom
STEP
6
Turn on
engine fuel
(if equipped)
STEP
7
STEP
11
Stow Jack
STEP Raise boom from
boom rest.
12
Select
Ground
Control
STEP
8
13
Pull emergency
stop to turn on.
Swing
boom away from tongue.
STEP
9
STEP Fully lower and retract
boom, lower outriggers
until all outrigger lights
are on and machine beeps 3
times indicating
machine is properly
leveled.
10
Getting Started
User Flash Codes
STEP
1
Read the Operation and
Safety Manual. Perform
Pre-Start Inspection.
!
1 Flash
Extend boom out
and lower boom to ground.
STEP
Turn
Emergency Stop
clockwise to release.
STEP
Select
function
using rotary switch.
STEP
15
4
Select
Platform
Control
Release joystick controller,
allow to return to center, wait
5 seconds, and follow steps
4 & 5.
STEP
3
14
!
2 Flashes
!
4 Flashes
Function speeds may be slow.
Lift up and telescope out may
be prevented.
Fully retract boom, lower
boom, and reset outriggers.
Push Emergency Stop to shut
machine off. Wait 5 seconds
and follow step 2.
Depress
Trigger Switch
STEP
16
Enter
Platform
Quick Reference
2
STEP
STEP
Hold enable switch
then activate machine function.
GETTING STARTED
STEP
5. ENGAGE DRIVE MOTORS
TURN VALVE KNOB CLOCKWISE UNTIL TIGHT.
Quick Reference
GETTING STARTED
Read the Operation and
Safety Manual. Perform
Pre-Start Inspection.
DISENGAGE BRAKE BEFORE
WINCHING OR TOWINGTOW OR WINCH SLOWLY
2 M.P.H. / 3.2 K.P.H. MAX.
1706897
Getting Started
1
4. RESET PARKING BRAKE
TURN BRAKE CAMS TO VERTICAL USING 3/4" WRENCH.
TURN VALVE KNOB CLOCKWISE
UNTIL TIGHT.
1703698C
1706890
STEP
3. WINCH OR TOW
TURN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT.
1704017B
1. DISENGAGE DRIVE MOTORS
STEP
5
1706890A
Move Joystick
to operate function
!
5 Flashes
Battery may need recharged.
Push Emergency Stop to shut
off, wait 5 seconds, follow
step 2, and check battery level.
1706897A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
41
JLG INSTRUCTION DECALS
1706924
1001094359
Finishing
Troubleshooting ES
FINISHING
STEP
STEP
1
6
Read the Operation and
Safety Manual.
STEP
STEP
2
7
Set
Jack
Turn off
Control
Select
STEP
3
STEP
8
Fully retract and swing boom
to align with tongue.
STEP
STEP
5
Lower boom to
boom rest.
Fully raise
outriggers.
Push
emergency
stop to turn off.
STEP
11
2
!
Stow Jack
STEP
12
1001094359A
Hook up lights
and safety chains
(if equipped).
STEP
13
Release
Brake
9
FINISHING
4
Latch Boom
1
STEP
Turn off
engine
fuel (if equipped)
STEP
10
Couple
to tow vehicle.
1706924A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
42
1-877-JLG-LIFT | www.jlg.com
JLG MISCELLANEOUS
SAFETY DECALS
DECALS
1700584
1700818
Patent (BLK)
LP Gas (ENG)
L.P. GAS
LIQUID
WITHDRAW
SYSTEM
JLG INDUSTRIES, INC.
1700584 L
1 JLG DRIVE
McCONNELLSBURG, PA
17233
COVERED UNDER ONE OR MORE
OF THE FOLLOWING PATENTS
UNITED STATES PATENTS
4775029
5992562
6098823
6488161
6571913
4754840
5160055
5957494
6330933
6561546
5740887
6065565
6390312
6501198
CANADA PATENTS
1291047
2076949
0785168
1702276
1702612
Attach Safety Belt Here
Lanyard 7/8"(D-Ring)
ATTACH LANYARD HERE
1702612
1700818 B
OTHER PATENTS PENDING
1704412
Oil Chart
1704412J
1703464
AC Power
1703175
Lanyard (GM,D-Rings)
CERTIFIED LANYARD ANCHORAGE POINT
AS PER GM K-1 SPECIFICATION
120V - 60Hz
AC POWER TO
PLATFORM 1703464B
1703175
1703815
Mobil 424
P/N 2300014
Mobil DTE 10 EXCEL 15
Attach Lanyard Here 3/4"
P/N 2300028
Mobil DTE 10 EXCEL 32
P/N 2300016
ATTACH LANYARD HERE
Mobil EAL 224H
P/N 2300027
1703815A
Mobil EAL Envirosyn H46
P/N 2300029
Union Carbide Ucon
Hydrolube HP-5046D
P/N 2300021
Fuchs
Plantolube Polar 15S
P/N 2300030
EXXON UNIVIS HVI 26
P/N 2300039
Mobil EAL Envirosyn H32
P/N 2300042
Quintolubric 888-46
P/N 2300019
1705132
Control ADE
1705303
Ad
ADE
1705374
CSA
L
O
CONTR
R
by
ctronics
esign Ele
vanced D
1705375
240V 60HZ
This machine meets or exceeds
applicable requirements of
CSA B354.2-01 as originally
manufactured for intended purposes.
240V 3 Phase 60HZ
240V - 60HZ
240V - 3 PHASE - 60HZ
1705375 A
1705374 A
1705303A
R
3251813
Built in the USA
Battery Charging
-
+
-
+
100%
IMPORTANT
3251243
1705850
Platform Color (Pro-Fit)
S
TM
DECAL SIZE: 44” X 4”
1705834
www.jlg.com
120V-60HZ
120V - 60HZ
3251243
Built With Pride
In The
USA
3251813C
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
43
JLG MISCELLANEOUS DECALS
3252761
120V
120V AC
3252761A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
44
1-877-JLG-LIFT | www.jlg.com
JLG WARNING
SAFETY DECALS
DECALS
1701214
Outrigger (DOM/CSA)
! WARNING
1702249
CRUSHING HAZARD
Gate
WARNING
!
Keep away from outriggers/
stabilizers.
FALLING HAZARD
1702249B
CLOSE AND LOCK GATE BEFORE OPERATING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY
Failure to follow these instructions
could result in death or serious injury.
1701214B
1702961
1702962
Prop 65/Gas
!
1703181
Prop 65/DSL
500lb Capacity
CALIFORNIA
Proposition 65 Warning
WARNING: !
The engine exhaust from this product
Diesel engine exhaust and some of its
contains chemicals known to the State
of California to cause cancer, birth
defects, or other reproductive harm.
constituents are known to the State
of California to cause cancer, birth
defects, or other reproductive harm.
500 LBS
UNRESTRICTED CAPACITY
WARNING
!
TIP OVER HAZARD
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
Tip-over could result in SERIOUS INJURY OR DEATH.
1703181 B
1702962
1702961
1703942
Crushing (CAN)
1703804
1703813
Crushing
!
WARNING
CRUSHING HAZARD
EXPLOSION/FIRE HAZARD
Do not stand under a raised platform or boom,
or between a rotating platform and the boom.
Charge batteries in well ventilated area, free of
flames, smoking, or sparks.
Keep all body parts away from any moving components.
Failure to follow these instructions could
result in death or serious injury.
!
Battery Ventilation
WARNING
Failure to follow warning could cause
death or serious injury.
1703813A
1703804 B
WARNING
!
MISE EN GARDE
CRUSHING HAZARD
RISQUE D'ÉCRASEMENT
Do not stand under a raised platform or boom,
or between a rotating platform and the boom.
Ne pas se poster sous la plate-forme
ou la flèche surélevée, ni entre la
plate-forme pivotante et la flèche.
Keep all body parts away from any
moving components.
Se tenir à l'écart des pièces en mouvement..
Failure to follow these instructions
could result in death or serious injury.
Le non respect de ces consignes peut
entraîner la mort ou causer des
blessuresgraves.
CAN
1703953
1703948
Crushing
Crushing (CAN)
!
WARNING
CRUSHING HAZARD
!
MISE EN GARDE
RISQUE D'ÉCRASEMENT
Do not stand under a raised platform or boom,
or between a rotating platform and the boom.
Ne pas se poster sous la plate-forme
ou la flèche surélevée, ni entre la
plate-forme pivotante et la flèche.
Keep all body parts away from any
moving components.
Se tenir à l'écart des pièces en mouvement..
Failure to follow these instructions
could result in death or serious injury.
CAN
1703942 A
Le non respect de ces consignes peut
entraîner la mort ou causer des
blessuresgraves.
1703948-B
!
WARNING
CRUSHING HAZARD
Do not stand under a raised platform or boom,
or between a rotating platform and the boom.
Keep all body parts away from any moving components.
Failure to follow these instructions could
result in death or serious injury.
1703953 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
45
JLG WARNING DECALS
1703984
1704096
Foot Switch (CAN)
!
Dual Capacity (DOM)
WARNING
Death or serious injury could
result if foot switch is disabled,
blocked or inoperative.
+
100 lb/450 N
MAX
Un interrupteur à pédale hors service,
bloqué ou inopérant constitue un
danger de mort ou de blessure grave.
+
=
ANSI
WARNING
!
1000 lbs
450 kg
UNRESTRICTED CAPACITY
MISE EN GARDE
!
500 lbs
230 kg
=
MAX
TIP OVER HAZARD
500 lbs
230 kg
1000 lbs
450 kg
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
MAX
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
1704096 D
1703984 B
CAN
1704104
Dual Capacity (DOM)
!
1704340
Battery Ventilation (CAN)
WARNING
TIP-OVER HAZARD
MAX
UNRESTRICTED CAPACITY
1704432
!
MAX
DOM1
WARNING
+
EXPLOSION/FIRE HAZARD
Keep all body parts away from any moving components.
=
500 lbs
230 kg
1704340 A
750 lbs
340 kg
UNRESTRICTED CAPACITY
BATTERY COMPARTMENT
No flames, smoking, or sparks.
Failure to follow warning could cause
death or serious injury.
1704479A
Failure to follow these instructions could
result in death or serious injury.
L'inobservation de cet avertissement peut entraîner la
mort ou des blessures graves.
CAN
750lb/500lb Capacity (Platform)
!
CRUSHING HAZARD
AVERTISSEMENT
Rechargez les batteries dans un local bien ventilé,
dépourvu de flammes, de fumées ou d'étincelles.
1704995
Battery
WARNING
!
RISQUE D'EXPLOSIONT/D'INCENDIE
1704104 C
1704479
Crushing
WARNING
EXPLOSION / FIRE HAZARD
Charge batteries in well ventilated area, free of
flames, smoking, or sparks.
Failure to follow warning could cause
death or serious injury.
500 lbs
230 kg
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
500 lbs
!
1000 lbs
450 kg
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
1704432 A
100 lb/450 N
MAX
DOM
+
=
750 lbs
340 kg
!
MAX
500 lbs
230 kg
WARNING
TIP OVER HAZARD
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
MAX
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
RESTRICTED CAPACITY
1704995 E
1704996
750lb/500lb Capacity (DOM)
!
1705088
WARNING
Dual Capacity 500lb (DOM)
TIP-OVER HAZARD
750 lbs
340 kg
Ground control operation
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
500 lbs/230 kg
750 lbs/340 kg
100 lb/450 N
MAX
MAX
DOM
=
500 lbs
230 kg
1000 lbs
450 kg
UNRESTRICTED CAPACITY
500 lbs
230 kg
UNRESTRICTED
CAPACITY
RESTRICTED
CAPACITY
+
MAX
If any load is in the platform, fully retract the boom before lowering.
DOM
+
=
1000 lbs
450 kg
RESTRICTED CAPACITY
MAX
500 lbs
230 kg
MAX
!
WARNING
TIP OVER HAZARD
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
1705088 C
1704996 D
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
46
1-877-JLG-LIFT | www.jlg.com
JLG WARNING
SAFETY DECALS
DECALS
1705089
Dual Capacity 500lb (DOM) (MTB)
!
1705168
WARNING
Platform Capacity 1200/1350
TIP-OVER HAZARD
1000 lbs
450 kg
Ground control operation
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
500 lbs/230 kg
1000 lbs/450 kg
UNRESTRICTED
CAPACITY
RESTRICTED
CAPACITY
1705336
500 lbs
230 kg
100 lb/450 N
MAX
MAX
+
DOM
DOM
=
500 lbs
230 kg
!
=
WARNING
TIP OVER HAZARD
UNRESTRICTED CAPACITY
On units with inoperative or defaced capacity indicators, do not exceed
500 pounds maximum platform capacity.
Axles must be properly extended before lifting boom above horizontal or
extending boom beyond 2ft (0.60m).
1000 lbs
450 kg
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
1705168 D
1705089 B
1705337
Inspection 1350SJP
!
+
MAX
If any load is in the platform, fully retract the boom before lowering.
Tip-Over (BCS) 1350SJP
WARNING
1705387
! WARNING
THIS MACHINE MUST NOT BE USED UNTIL IT IS
INSPECTED AND OPERATING PROPERLY.
DO NOT operate this machine unless you have been properly trained
as described in the JLG Operation and Safety Manual by a qualified
person and authorized to operate this machine. Your training
includes reading and understanding the safety, operating and
maintenance instructions in manufacturer’s manuals, the Manual of
Responsibilities, knowing your employers work rules and applicable
governmental regulations.
Danger High Voltage
TIP OVER HAZARD
!
This machine is equipped with a Boom Control System.
Red light
indicates the platform is outside the operating area and
operation of certain boom functions may be disabled. Attempts to use
the disabled functions cause
to flash and an audio alarm to sound.
Immediately return the platform to the ground.
If
stays on the system must be repaired by JLG authorized service
personnel before machine can be used.
DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with
items of different weight or specification because this will affect the
stability of the machine.
DO NOT modify or change this machine without written approval
from the manufacturer
Make sure all tires are in good condition and air filled tires are
properly inflated
Operate this machine with extreme caution. STOP all operation if a
malfunction occurs.
Check all functions at ground control and platform control stations.
Select an area free of obstructions.
Follow the Instructions in the Operating Manual, the Manual
of Responsibilities and applicable standards for required inspections.
Read and understand decals and placards.
1705337 A
WARNING
HAZARDOUS VOLTAGE INSIDE
Do not remove cover with engine running.
Refer to the Service and Maintenance
Manual for servicing instructions.
Death or serious injury could result from
contact with energized conductors.
1705387 B
Failure to follow instructions could result in serious injury or death.
If this machine is not properly maintained, death or serious
injury could occur.
1705680
1705492
WARNING
Inspection (Platform)
Tip-Over Platform
!
Tip-Over/Crushing/Falling
1705679
TIP-OVER HAZARD
· Do not exceed platform rated capacity or rated number
of people. Evenly distribute load.
· Do not expose platform to high winds or horizontal forces.
· Machine must be on smooth, firm and level surface
before elevating platform.
· Do not drive with platform raised, or raise platform
WARNING
TIP-OVER HAZARD
Installing or removing approved accessories or
changing platform size requires recalibration of
the boom control system.
Reference the Service & Maintenance Manual
for proper procedures.
Failure to follow instructions
could result in serious injury
or death.
·
1705492 A
Do not operate this machine unless you
have been properly trained as described
in the JLG Operation and Safety Manual
by a qualified person and authorized to
operate this machine. Your training
includes reading and understanding the
safety, operating and maintenance
instructions in manufacturer’s manuals,
knowing your employers work rules and
applicable governmental regulations.
· Follow the Instructions in the Operating
·
1705694
Crushing 1930ES
WARNING
CRUSHING HAZARD
• Do not stand under or around platform
during operation.
• Use safety props for maintenance.
Failure to follow these instructions
could result in death or serious
injury.
1705694A
·
·
Manual,the Manual of Responsibilities
and applicable standards for
required inspections.
Do not replace items (i.e., Batteries,
wheels, counterweight, etc.) with items of
different weight or specification because
this will affect stability of machine.
Do not modify or change machine without
written approval from manufacturer.
Operate this machine with extreme
caution. STOP all operation if malfunction
occurs.
Improper use of this machine could
cause death or serious injury.
1705679 C
when on uneven, sloping or soft surfaces including
trucks, trailers, railway cars, floating vessels, scaffolds
or similar areas.
Do not drive near drop offs, holes or other hazards.
Make sure operating surface will support the machine.
Make sure all tires are in good condition and air filled
tires are properly inflated.
If required, outriggers or stabilizers shall be extended
and properly set.
Do not carry sheet type materials (i.e. drywall, plywood,
roof panels) outdoors or in any windy conditions as
they may act as a wind sail.
Death or serious injury could occur from a tip-over.
·
·
·
·
·
CRUSHING HAZARD
· Always look in the direction of movement.
· Keep clear of obstructions.
· Keep all body parts inside platform during operation.
Failure to follow instructions could result in
death or serious injury.
FALLING HAZARD
· Keep both feet on platform floor.
· Do not climb, sit or stand on platform guard rails.
· Ensure entrance area is properly closed.
· Do not use planks, ladders or similar items in platform
to get added reach.
· All guard rails must be properly installed during
operation.
Falling from platform could cause death or
serious injury.
1705680 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
47
JLG WARNING DECALS
1706111
NOTICE
WARNING
Boom is latched to tongue.
Tongue jack is retracted and folded
up parallel to tongue.
Outriggers are in fully stowed position.
Hitch and ball load rating are adequate.
Coupler hitch and trailer ball are same size.
Safety chains properly attached to
tow vehicle.
All trailer lights work properly.
Coupler is properly seated and latched.
Trailer brakes adjusted and break away
device is attached to tow vehicle.
Coupler travel latch is latched and
locked with pin or padlock.
Contact your Motor Vehicle
Authority for more information.
Failure to follow these instructions could result in death or serious injury.
!
WARNING
DO NOT EXCEED
65 M.P.H.
You are required to comply with
all local, regional and national
requirements for trailer operation
including brakes, licensing, and
any additional equipment that may
be necessary.
CHECK BEFORE TOWING!
Wheel lug nuts for tightness.
Inspection
Speed Limit
Read and understand Operation and Safety Manual and all decals before use.
Do not tow trailer until it is inspected and operating properly.
Tire pressure and condition.
1706135
1706112
Machine Operation
WARNING
Improper Use Hazard
DO NOT operate this machine unless you have been properly
trained as described in the JLG Operation and Safety Manual.
Make sure that all of the outrigger set indicator lights are lit.
DO NOT modify or change this machine without written
approval from the manufacturer.
Make sure that all the inspections listed in the JLG Operations
And Safety Manual are done.
or the legal speed limit whichever is lower
Excessive speed could result in loss of control
and serious injury or death
1706112B
Failure to follow these instructions could result in
death or serious injury.
1706111E
1706135B
1706298
Carry Personnel
1706300
1706296
1706302
Ether Warning
Battery Warning Lull
Pinch Point Boom Holes
1706296C
WARNING
PINCH POINTS could crush or cut
causing death or serious injury.
Pre -
1706300C
Keep clear of
pinch points.
1706302B
1706298D
1706306
1706385
Tip-Over Hazard
Drop Bar
1706306A
Check the condition of the approved fall protection device,
lanyard and the designated attachment point to the platform.
Wear approved fall protection items and attach to marked locations.
Keep both feet on platform floor.
Ensure entrance area is properly closed.
DO NOT use planks, ladders or similar items in platform to
get added reach.
Falling from platform could cause death or
serious injury.
1706386A
Vehicle Roll Away
Voltage Warning
WARNING
WARNING
FALLING HAZARD
1706768
1706765
Crushing Platform
Fall Hazard
• Do not tie or disable gate.
Failure to follow these instructions
could result in death or serious injury.
!
CRUSHING HAZARD
Always look in the direction of movement.
Keep clear of obstructions.
Keep all body parts inside of platform during operation.
WARNING
HAZARDOUS VOLTAGE INSIDE
Refer to the Service and Maintenance
Manual for servicing instructions.
Death or serious injury could result from
contact with energized conductors.
Failure to follow instructions could
result in death or serious injury.
1706387 B
1706765A
WARNING
Riders could fall
off machine
causing
death or
serious
injury.
No riders.
1706768B
1706387
1706386
FALL HAZARD
1706385C
WARNING
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
48
1-877-JLG-LIFT | www.jlg.com
JLG WARNING
SAFETY DECALS
DECALS
1707015
Dual Capacity
3252347
Footswitch
WARNING
!
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
500 lbs
230 kg
=
750 lbs
340 kg
MAX
UNRESTRICTED CAPACITY
100 lb/450 N
MAX
+
DOM
=
500 lbs
230 kg
750 lbs
340 kg
Swing Loads
DEATH OR SERIOUS
INJURY COULD
RESULT IF
FOOTSWITCH IS
DISABLED, BLOCKED
OR INOPERATIVE.
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
+
4110422
! WARNING
TIP-OVER HAZARD
MAX
SWINGING LOADS could
cause MACHINE
TIPOVER which could
result in death or
serious injury.
WARNING
ALWAYS
• travel slowly
• rig properly
• use two tethers
4110422B
3252347 B
RESTRICTED CAPACITY
1707015 B
90553027
Warning Decal
91143282
91143284
Warning Decal
WARNING
Warning Decal
WARNING
WARNING
READ AND UNDERSTAND THE FOLLOWING PRIOR TO LIFTING PERSONNEL.
WHEN LIFTING PERSONNEL USE ONLY A JLG MANUFACTURED PERSONNEL WORK PLATFORM.
DO NOT DRIVE MACHINE WITH PERSONNEL IN PLATFORM.
WHEN PERSONNEL ARE IN PLATFORM REMAIN SEATED IN CAB WITH PERSONNEL
IN DIRECT LINE OF SIGHT.
OPERATE CONTROLS LIGHTLY AND CAUTIOUSLY WHEN LIFTING PERSONNEL.
READ AND UNDERSTAND PERSONNEL WORK PLATFORM USER'S MANUAL BEFORE LIFTING PERSONNEL.
DO NOT USE PERSONNEL WORK PLATFORM WITHOUT THE PROPER JLG MATERIAL
HANDLER/PERSONNEL WORK PLATFORM CAPACITY CHART DISPLAYED IN CAB.
FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH.
9055-3027 REV B
LEAD ACID BATTERIES PRODUCE FLAMMABLE AND
EXPLOSIVE GASES
WHEN CHECKING, TESTING, USING
BOOSTER BATTERY OR CHARGING BATTERIES:
* DO NOT USE SMOKING MATERIALS NEAR BATTERIES
* KEEP FLAMES AND SPARKS AWAY FROM BATTERIES
* WEAR SAFETY GLASSES
* ASSURE BATTERY IS NOT FROZEN AND ELECTROLYTE
IS AT PROPER LEVEL IN EACH CELL
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DAMAGE TO THE
ELECTRICAL SYSTEM
9114-3284
STAY CLEAR OF PINCH POINT AREA
ANYTIME ENGINE IS RUNNING.
BEING IN PINCH POINT AREA COULD
CAUSE SERIOUS INJURY OR DEATH.
9114-3282
1001101420
Sky Glazier Capacity
WARNING
MAX
IMPORTANT
TIP-OVER HAZARD
For use on JLG Boom Lift
models with side entry
platform only.
Properly secure panel before
moving platform.
Remove tray when not in use.
Do not exceed platform/tray capacity.
Refer to capacity decal on tray and SkyGLAZIER
Operating Manual for capacity ratings.
Observe all operating instructions and restrictions
for use for this accessory.
Failure to follow instructions could
result in serious injury or death.
32 ft 2
3m
2
MODEL 400S,600A,600S,800A,800S,1200SJP,1350SJP,1250AJP
1000 lb/450 kg Zone
M
A
X
+
500 lbs
230 kg
250 lbs
110 kg
+
250 lbs
110 kg
750 lb/340 kg Zone
45 lb
200 N
+
150 lbs
70 kg
150 lbs
70 kg
R
MODEL 460SJ,660SJ,600AJ,600SJC,800AJ
MODEL 860SJ
500 lb/230 kg Zone
90 lb
400 N
20mph
32 kph
9 m/s
440 lbs
200 kg
90 lb
400 N
500 lb/230 kg Zone
+
250 lbs
110 kg
500 lb/230 kg Zone
45 lb
200 N
250 lbs
110 kg
+
150 lbs
70 kg
45 lb
200 N
1001101420 C
!
150 lbs
70 kg
1001121813
Dual Capacity (ANSI)
!
1001121800
Dual Capacity (DOM)
+
=
TIP-OVER HAZARD
500 lbs
227 kg
1000 lbs
454 kg
UNRESTRICTED CAPACITY
100 lb/445 N
MAX
ANSI
+
=
1000 lbs
454 kg
WARNING
MAX
500 lbs
227 kg
MAX
!
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
WARNING
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
TIP OVER HAZARD
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
+
=
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
1001121800 A
500 lbs
227 kg
1000 lbs
454 kg
MAX
UNRESTRICTED CAPACITY
100 lb/445 N
MAX
ANSI
+
=
1000 lbs
454 kg
500 lbs
227 kg
MAX
1001121813 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
49
JLG WARNING DECALS
1001121814
Maximum Capacity (DOM)
!
WARNING
1001122369
TIP-OVER HAZARD
Dual Capacity
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
+
=
500 lbs
227 kg
WARNING
!
TIP OVER HAZARD
UNRESTRICTED CAPACITY
+
100 lb/445 N
MAX
=
100 lb/445 N
MAX
500 lbs
227 kg
ANSI
1000 lbs
454 kg
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
1001122369 A
MAX
UNRESTRICTED CAPACITY
1001121814 A
1001122507
1001122508
Dual Capacity (ANSI)
+
=
Dual Capacity (ANSI)
500 lbs
227 kg
+
=
WARNING
!
1000 lbs
454 kg
UNRESTRICTED CAPACITY
ANSI
=
500 lbs
227 kg
ANSI
100 lb/445 N
MAX
+
On units with inoperative or defaced capacity indicators, do not exceed
500 pounds maximum platform capacity.
Axles must be properly extended before lifting boom above horizontal or
extending boom beyond 2ft (0.61m).
500 lbs
227 kg
1000 lbs
454 kg
+
TIP OVER HAZARD
MAX
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
MAX
100 lb/445 N
MAX
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
RESTRICTED CAPACITY
500 lbs
227 kg
=
+
ANSI
1001122507 A
750 lbs
340 kg
=
!
750 lbs
340 kg
UNRESTRICTED CAPACITY
WARNING
MAX
500 lbs
227 kg
TIP OVER HAZARD
Do not exceed the platform capacity indicated on the capacity indicator
located on the platform control console. On units with inoperative or defaced
capacity indicators, do not exceed 500 pounds maximum platform capacity.
MAX
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
RESTRICTED CAPACITY
1001122508 A
1001122516
Dual Capacity (ANSI)
!
WARNING
TIP-OVER HAZARD
Ground control operation
If any load is in the platform, fully retract the boom before lowering.
DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER.
+
=
500 lbs
227 kg
750 lbs
340 kg
MAX
UNRESTRICTED CAPACITY
100 lb/445 N
MAX
+
ANSI
=
500 lbs
227 kg
750 lbs
340 kg
MAX
RESTRICTED CAPACITY
1001122516 A
1001126742
Sky Glazier Capacity
WARNING
MAX
IMPORTANT
TIP-OVER HAZARD
Do not exceed platform/tray capacity.
Refer to capacity decal on tray and SkyGLAZIER
Operating Manual for capacity ratings.
Observe all operating instructions and restrictions
for use for this accessory.
Failure to follow instructions could
result in serious injury or death.
For use on JLG Boom Lift
models with side entry
platform only.
Properly secure panel before
moving platform.
Remove tray when not in use.
32 ft 2
3m
2
MODEL 400S,600A,600S,800A,800S,1200SJP,1350SJP,1250AJP,1500SJ
1000 lb/454 kg Zone
M
A
X
+
500 lbs
227 kg
250 lbs
113 kg
90 lb
400 N
500 lb/227 kg Zone
+
150 lbs
68 kg
250 lbs
113 kg
45 lb
200 N
20mph
32 kph
9 m/s
MODEL 460SJ,660SJ,600AJ,600SJC,800AJ
MODEL 860SJ
750 lb/340 kg Zone
+
150 lbs
68 kg
440 lbs
200 kg
90 lb
400 N
R
500 lb/227 kg Zone
+
150 lbs
68 kg
250 lbs
113 kg
45 lb
200 N
500 lb/227 kg Zone
+
150 lbs
68 kg
250 lbs
113 kg
45 lb
200 N
1001126742 B
!
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
50
1-877-JLG-LIFT | www.jlg.com
JLG WARNING/DANGER
SAFETY DECALS
DECALS
1703797
Warning/Danger Platform
Warning/Danger
ELECTROCUTION HAZARD
This machine is not insulated.
!
WARNING
!
DO NOT OPERATE THIS MACHINE UNLESS
!
WARNING
TIP-OVER HAZARD
When "CHASSIS OUT OF LEVEL" indicator light is on, retract and lower boom and move machine to a level surface.
Failure to follow instructions could cause SERIOUS INJURY OR DEATH.
!
Failure to follow instructions will result in death or serious injury.
ELECTROCUTION HAZARD
THIS MACHINE IS NOT
INSULATED
!
You must maintain a clearance of at least 10 feet between
any part of the machine or load and any electrical line or
apparatus charged up to 50,000 volts. One foot additional
clearance is required for each additional 30,000 volts or less.
Allowances must be made for machine movement and
electrical line sway.
SERIOUS INJURY OR DEATH will result from
contact or inadequate clearance.
!
Machine must be on a smooth, firm and level surface before swinging, elevating and/or
extending boom.
DO NOT exceed platform rated capacity.
Make sure the operating surface will support the machine.
DO NOT drive with platform raised, or raise platform, when on uneven, sloping or soft surfaces
including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas.
DO NOT raise platform during high winds.
DO NOT drive near drop offs, holes or other hazards.
Make sure all tires are in good condition and air filled tires are properly inflated.
To drive on a slope, boom must be retracted, lowered below horizontal and centered between
the rear wheels.
When “Chassis out of level” indicator light is on, retract and lower boom and move machine
to a level surface.
Driving with boom above horizontal or extended is restricted to smooth, firm and level surfaces
free of obstructions.
When DRIVING observe the following:
All persons in the platform shall wear an approved fall protection device
with lanyard attached to the designated attach point.
• Direction of drive and steer functions are opposite to
controls motion when boom is positioned over front axle.
Always look at the decals on the chassis and drive/steer
control for proper direction.
Machine must be on a SMOOTH, FIRM and LEVEL surface before
elevating and/or extending boom.
• To drive on any slope, boom must be retracted, lowered
below horizontal, and centered between rear wheels.
Move controls slowly for smooth operation. Stop all operation if
malfunction occurs.
Watch for obstructions which may strike persons or machines.
Death or serious injury could result from a tip-over.
Check the condition of the approved fall protection device, lanyard and the
designated attachment point to the platform.
Wear approved fall protection items and attach to marked locations.
Keep both feet on platform floor.
Ensure entrance area is properly closed.
DO NOT use planks, ladders or similar items in platform to get added reach.
• Driving with boom above horizontal or extended is restricted
to SMOOTH, FIRM, and LEVEL surfaces free of obstructions.
THIS MACHINE MUST NOT BE USED UNTIL IT
IS INSPECTED AND OPERATING PROPERLY.
DO NOT operate this machine unless you have been properly trained as
described in the JLG Operation and Safety Manual by a qualified person
and authorized to operate this machine. Your training includes reading
and understanding the safety, operating and maintenance instructions in
manufacturer’s manuals, the Manual of Responsibilities, knowing your
employers work rules and applicable governmental regulations.
Follow the Instructions in the Operating Manual, the Manual
of Responsibilities and applicable standards for required inspections.
DO NOT replace items (i.e., batteries, tires, counterweight, etc.) with
items of different weight or specification because this will affect the
stability of the machine.
FALLING HAZARD
• Do not drive up or down grades exceeding machine
gradeability or side slopes exceeding 5 degrees. Machine
must be assisted (towed) up or down grades exceeding
machine gradeability.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
WARNING
TIP-OVER HAZARD
WARNING
Inspect the machine by performing the walk-around and safety checks
listed on the checklist at the ground control station.
!
!
Maintain a clearance of at least 10FT.(3M) between any part of machine or load and
any electrical lines or apparatus.
DANGER
you have been properly trained as described in the JLG operation and safety manual by a qualified person and authorized to
operate this machine. Training includes reading and understanding the safety, operating and maintenance instructions in the
manufacturer's manuals, knowing your employer's work rules and applicable govermental regulations. Untrained operators
could cause SERIOUS INJURY OR DEATH to themselves or others.
!
!
!
DANGER
!
1702785
DO NOT modify or change this machine without written approval from
the manufacturer.
Operate this machine with extreme caution. STOP all operation if a
malfunction occurs.
Falling from platform could cause death or serious injury.
1702785 B
Test foot switch for proper operation.
CRUSHING HAZARD
Always look in the direction of movement.
Keep clear of obstructions.
Direction of drive and steer functions are opposite to the motion of the controls
when the platform is positioned over the front axle end. Always look at the decals
on the chassis and drive / steer control for proper direction.
Keep all body parts inside of platform during operation.
Test high engine and high drive cut out switches for proper operation.
Improper use of this machine could cause death
or serious injury.
Failure to follow instructions could result in death or serious injury.
1703798
1703797 D
1703816
Warning/Danger MTB
Warning/Danger
!
DANGER
DANGER
ELECTROCUTION HAZARD
This machine is not insulated.
· This machine is not insulated.
· Maintain a clearance of at least 10FT.(3M) between any part of machine or load and
Maintain a clearance of at least 10FT.(3M ) between any part of
machine or load and any electrical lines or apparatus.
Failure to follow instructions will result in death or serious injury.
any electrical lines or apparatus.
Failure to follow instructions will result in death
or serious injury.
!
!
WARNING
CRUSHING HAZARD
· Do not exceed platform rated capacity or rated number
of people. Evenly distribute load.
· Do not expose platform to high winds or horizontal forces.
· Machine must be on smooth, firm and level surface
· Do not operate this machine unless you
before elevating platform.
have been properly trained as described
· Do not drive with platform raised, or raise platform
in the JLG Operation and Safety Manual
Failure to follow these instructions could
result in death or serious injury.
· Do not drive near drop offs, holes or other hazards.
· Make sure operating surface will support the machine.
· Make sure all tires are in good condition and air filled
tires are properly inflated.
· If required, outriggers or stabilizers shall be extended
and properly set.
· Do not carry sheet type materials (i.e. drywall, plywood,
WARNING
when on uneven, sloping or soft surfaces including
trucks, trailers, railway cars, floating vessels, scaffolds
or similar areas.
roof panels) outdoors or in any windy conditions as
they may act as a wind sail.
Death or serious injury could occur from a tip-over.
WARNING
THIS MACHINE MUST NOT BE USED UNTIL IT IS
INSPECTED AND OPERATING PROPERLY.
DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety
Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding
the safety, operating and maintenance instructions in manufacturer’s manuals, the Manual of Responsibilities,
knowing your employers work rules and applicable governmental regulations.
Failure to follow instructions could result in
death or serious injury.
· Follow the Instructions in the Operating
Manual,the Manual of Responsibilities
and applicable standards for
required inspections.
· Do not replace items (i.e., Batteries,
Wheels, counterweight, etc.) with items of
Different weight or specification because
this will affect stability of machine.
· Do not modify or change machine without
written approval from manufacturer.
· Keep both feet on platform floor.
· Do not climb, sit or stand on platform guard rails.
· Ensure entrance area is properly closed.
· Do not use planks, ladders or similar items in platform
to get added reach.
· All guard rails must be properly installed during
DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight
or specification because this will affect the stability of the machine.
DO NOT modify or change this machine without written approval from the manufacturer.
Make sure all tires are in good condition and air filled tires are properly inflated.
Operate this machine with extreme caution. STOP all operation if a malfunction occurs.
Check all functions at ground control and platform control stations. Select an area free of obstructions.
Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable
standards for required inspections.
Read and understand decals and placards.
If this machine is not properly maintained, death or serious injury could occur.
· Always look in the direction of movement.
· Keep clear of obstructions.
· Keep all body parts inside platform during operation.
by a qualified person and authorized to
operate this machine. Your training
includes reading and understanding the
safety, operating and maintenance
instructions in manufacturer's manuals,
knowing your employers work rules and
applicable governmental regulations.
operation.
Falling from platform could cause death or
serious injury.
· Operate this machine with extreme
caution. STOP all operation if malfunction
occurs.
Improper use of this machine could
cause death or serious injury.
1703816 E
1703798 D
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
51
JLG WARNING/DANGER DECALS
1703818
Crush Hazard
WARNING
DANGER
• This machine is not insulated.
• Maintain a clearance of at least 10FT.(3M)
between any part of machine or load
and any electrical lines or apparatus.
Failure to follow instructions will
result in death or serious injury.
• Do not stand under or around platform
during operation.
• Use safety props for maintenance.
Failure to follow these instructions
could result in death or serious
injury.
1703818 B
1703924
Warning (Platform) CAN
!
DANGER
!
ELECTROCUTION HAZARD
This machine is NOT insulated.
Maintain a clearance of at least 10FT.(3M) between any part of machine or load and
any electrical lines or apparatus.
Failure to follow instructions will result in death or serious injury.
!
Le non-respect de ces instructions provoquera des blessures graves, voire mortelles.
WARNING
!
THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY.
DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual
by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating
and maintenance instructions in manufacturer’s manuals, knowing your employers work rules and applicable governmental regulations.
Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections.
DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight or specification because this will
affect the stability of the machine.
DO NOT modify or change this machine without written approval from the manufacturer.
Operate this machine with extreme caution. STOP all operation if a malfunction occurs.
Test foot switch for proper operation.
Test high engine and high drive cut out switches for proper operation.
Improper use of this machine could cause death or serious injury.
TIP-OVER HAZARD
Machine must be on a smooth, firm and level surface before elevating and/or extending boom.
DO NOT exceed platform rated capacity.
Make sure the operating surface will support the machine.
DO NOT drive with platform raised, or raise platform, when on uneven, sloping or soft surfaces
including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas.
DO NOT raise platform during high winds.
DO NOT drive near drop offs, holes or other hazards.
Make sure all tires are in good condition and air filled tires are properly inflated.
To drive on a slope, boom must be retracted, lowered below horizontal and centered between the rear wheels.
When “Chassis out of level” indicator light is on, retract and lower boom and move machine to a level surface.
Driving with boom above horizontal or extended is restricted to smooth, firm and level surfaces free of obstructions.
Death or serious injury could result from a tip-over.
FALLING HAZARD
Check the condition of the approved fall protection device, lanyard and the designated attachment
point to the platform.
Wear approved fall protection items and attach to marked locations.
Keep both feet on platform floor.
Ensure entrance area is properly closed.
DO NOT use planks, ladders or similar items in platform to get added reach.
Falling from platform could cause death or serious injury.
CRUSHING HAZARD
Always look in the direction of movement.
Keep clear of obstructions.
Direction of drive and steer functions are opposite to the motion of the controls
when the boom is positioned over the front axle. Always look at the decals on the chassis and
drive / steer control for proper direction.
Failure to follow instructions could result in death or serious injury.
1703924 D
1704575
Warning/Danger MTB
!
DANGER
ELECTROCUTION HAZARD
This machine is not insulated.
1706676
Maintain a clearance of at least 10FT.(3M ) between any part of
machine or load and any electrical lines or apparatus.
1230ES Instructions/Warning
Failure to follow instructions will result in death
or serious injury.
!
WARNING
WARNING
THIS MACHINE MUST NOT BE USED
UNTIL IT IS INSPECTED AND OPERATING
PROPERLY:
Do not operate this machine unless you
have been properly trained as described
in the JLG Operation and Safety Manual
by a qualified person and authorized to
operate this machine. Your training
includes reading and understanding the
safety, operating and maintenance
instructions in manufacturer’s manuals,
knowing your employers work rules and
applicable governmental regulations.
Follow the Instructions in the Operating
Manual,the Manual of Responsibilities
and applicable standards for
required inspections.
Do not replace items (i.e., Batteries, wheels,
counterweight, etc.) with items of
different weight or specification because
this will affect stability of machine.
Do not modify or change machine without
written approval from manufacturer.
Operate this machine with extreme
caution. STOP all operation if malfunction
occurs..
CRUSHING HAZARD
Personnel shall not position themselves or other objects UNDER boom
and platform or BETWEEN boom and turntable or chassis.
When operating from ground control station avoid being BETWEEN
rotating superstructure and chassis or other immovable objects.
Failure to follow these instructions could
result in death or serious injury.
!
WARNING
THIS MACHINE MUST NOT BE USED UNTIL IT IS
INSPECTED AND OPERATING PROPERLY.
DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety
Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding
the safety, operating and maintenance instructions in manufacturer’s manuals, knowing your employers work rules and
applicable governmental regulations.
Improper use of this machine could cause death
or serious injury.
DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight
or specification because this will affect the stability of the machine.
DO NOT modify or change this machine without written approval from the manufacturer.
Make sure all tires are in good condition and air filled tires are properly inflated.
Operate this machine with extreme caution. STOP all operation if a malfunction occurs.
Check all functions at ground control and platform control stations. Select an area free of obstructions.
Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for
required inspections.
Read and understand decals and placards.
If this machine is not properly maintained, death or serious injury could occur.
DANGER
1704575 C
ELECTROCUTION HAZARD
This machine is not insulated.
Maintain a clearance of at least 10 ft/3m
between any part of machine or load and
any electrical line or apparatus.
Failure to follow instructions will result in
death or serious injury.
MAX:
500 LBS
227 kg
100 LBS
445 N
FALLING HAZARD
Keep both feet on platform floor.
Do not climb, sit or stand on
platform guard rails.
Ensure entrance area is
properly closed.
Do not use planks, ladders or
similar items in platform to get
added reach.
All guard rails must be properly
installed during operation.
Falling from platform could cause
death or serious injury.
TIP-OVER HAZARD
Do not exceed platform rated
capacity or rated number of
people. Evenly distribute load.
Do not expose platform to high
winds or horizontal forces.
Machine must be on smooth,
firm and level surface before
elevating platform.
Do not drive with platform
raised, or raise platform when
on uneven, sloping or soft
surfaces including trucks,
trailers, railway cars, floating
vessels, scaffolds or similar
areas.
Do not drive near drop offs,
holes or other hazards.
Make sure operating surface will
support the machine.
Make sure all tires are in good
condition.
Do not carry sheet type
materials (i.e. drywall, plywood,
roof panels) outdoors or in any
windy conditions as they may
act as a wind sail.
Death or serious injury could
occur from a tip-over.
CRUSHING HAZARD
Always look in the direction of
movement.
Keep clear of obstructions.
Keep all body parts inside the
platform during operation.
Failure to follow instructions
could result in death or
serious injury.
Manufactured by:
JLG Industries Inc.
1-877-JLG-LIFT
WWW.JLG.COM
1706676 E
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
52
1-877-JLG-LIFT | www.jlg.com
JLG WARNING/DANGER
SAFETY DECALS
DECALS
3252369
Warning/Danger
!
WARNING
Inspect the machine to be sure it is operating properly
and perform the daily maintenance and safety checks
listed on the check list at the ground control station.
!
All persons in the platform shall wear the approved fall
protection equipment with a lanyard attached to the
designated anchorage point.
!
Machine must be on a SMOOTH, FIRM, AND LEVEL
surface before elevating and/or extending boom.
!
!
!
Operate machine with extreme caution, STOP all
operation if malfunction occurs. Operate controls
slowly for smooth functions. Watch for
obstructions which may strike persons or machine.
WARNING
!
When DRIVING observe the following
-Direction of travel reverses in the relation to controls
motion when boom is over front (steer)axle.
-To drive on any slope, boom must be retracted ,
lowered below horizontal, and centered
between rear wheels.
-Do not drive up or down grades exceeding machine
gradeability or side slopes exceeding 5°. Machine
must be assisted (towed) up or down grades
exceeding machine capability.
-Drive with boom above horizontal or extended
is restricted to SMOOTH, FIRM, and LEVEL surfaces
free of obstructions. Exercise extreme caution
if driving within 6 feet of any obstruction.
Do not exceed rated platform capacity.
IMPROPER OPERATION OF THIS MACHINE COULD CAUSE SERIOUS INJURY OR DEATH.
!
DO NOT OPERATE THIS MACHINE UNLESS
you have been trained in the safe operation of this machine. Training includes complete knowledge of the safety and operating
instructions contained in the manufacturer’s manuals, your employer’s work rules, and applicable governmental regulations.
Untrained operators could cause SERIOUS INJURY OR DEATH to themselves or others
ELECTROCUTION HAZARD
WARNING
!
DANGER
THIS MACHINE IS NOT INSULATED
You must maintain a clearance of at least 10 feet
between any part of the machine or load and any
electrical line or apparatus charged up to 50,000
volts, one foot additional clearance is required
for each additional 30,000 volts or less.
Allowances must be made for operator error, boom
deflection, and electrical line swaying.
SERIOUS INJURY OR DEATH will result from
contact or inadequate clearance.
3252369-B
TIP-OVER HAZARD
Chassis out of level
When “CHASSIS OUT OF LEVEL” indicator light is on, retract and lower boom and move machine
to a level surface. Failure to follow instructions could cause SERIOUS INJURY OR DEATH.
1001117185
Warning/Instruction (DOM)
DANGER
ELECTROCUTION HAZARD
This machine is not insulated.
Maintain a clearance of at least 10ft./3m between
any part of machine or load and any electrical
line or apparatus.
IMPORTANT
FREE-WHEELING INSTRUCTIONS
Brake release button is located on the ground control station.
Brakes must be released before towing or manually moving machine.
Manufactured by:
JLG Industries Inc.
WWW.JLG.COM
WARNING
THIS MACHINE MUST NOT BE USED
UNTIL IT IS INSPECTED AND OPERATING
PROPERLY:
FALLING HAZARD
Keep both feet on platform floor.
Do not climb, sit or stand on platform guard rails.
Do not use planks, ladders or similar items in
platform to get added reach.
All guard rails must be properly installed during
operation.
Do not operate this machine unless you have been
properly trained as described in the JLG Operation and
Safety Manual and authorized to operate this machine.
Your training includes reading and understanding the JLG
safety and operation manuals for this model, and
knowing your employers work rules and applicable
governmental regulations
Follow the instructions in the Operating Manual, the
Manual of Responsibilities and applicable standards for
required inspections.
Do not replace items (i.e. Batteries, wheels,
counterweight, etc.) with items of different weight or
specification because this will affect stability of machine.
Do not modify or change machine without written
approval from manufacturer.
Operate this machine with extreme caution. STOP all
operation if malfunction occurs.
Falling from platform could cause
death or serious injury.
TIP-OVER HAZARD
Do not exceed platform rated capacity or rated
number of people.
Do not expose platform to high winds or
horizontal forces.
Machine must be on smooth, firm and level
surface before elevating platform.
Do not drive near drop offs, holes or other
hazards.
Make sure operating surface will support the
machine.
Death or serious injury could occur
from a tip-over.
CRUSHING HAZARD
Always look in the direction of movement.
Keep clear of obstructions.
Keep all body parts inside the platform during
operation.
Improper use of this machine could cause death or
serious injury.
Failure to follow instructions could
result in death or serious injury.
MAX:
150 LBS
70 kg
300 LBS
136 kg
350 LBS
160 kg
350 LBS
160 kg
400 LBS
180 kg
100 LBS
445 N
PLATFORM/
MATERIAL TRAY
EXTENSION PLATFORM
ALL OTHER
PLATFORMS
SP PLATFORM
1001117185 A
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
53
SKYJACK® CAPACITY DECALS
SJ123468
700lb Capacity
SJ126505
SJ124465
+
+
+
+
Side Force/No Wind
Side Force
400 N (90 lb)
12.5 m/s
(45 km/h)
318 KG.
(700 LBS.)
182 KG.
(400 LBS.)
136 KG.
(300 LBS.)
zz
(28 mph)
400 N (90 lb)
124465AG
0 m/s (0 mph)
zz
126505AE
123468AB
ZZ
SJ130315
SJ132333
Platform Capacity
+
+
Platform Capacity
+
454 kg
(1000 lb)
+
+
318 kg
(700 lb)
+
+
+
136 kg
(300 lb)
ZZ
130315AA
SJ132712
+
249 kg
(550 lb)
ZZ
317 kg
(700 lb)
+
204 kg
(450 lb)
ZZ
+
113 kg
(250 lb)
132333AA
SJ132713
550lb Capacity
+
+
+
Wheel Load
+
136 kg
(300 lb)
+
+
113 kg
(250 lb)
132712AA
570 kg
ZZ
(1260 lb)
132713AA
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
54
1-877-JLG-LIFT | www.jlg.com
SKYJACK® CAUTION
SAFETY DECALS
DECALS
SJ106515
Brake
CAUTION
INSTRUCTION FOR TOWING,
PUSHING OR WINCHING.
(REFER TO OWNERS MANUAL)
1. BEFORE TOWING, PUSHING OR WINCHING. VEHICLE MUST BE ON
LEVEL GROUND. READ AND UNDERSTAND ALL INSTRUCTIONS.
(REFER TO OWNERS MANUAL).
2. BLOCK OR CHOCK WHEELS TO PREVENT MACHINE ROLLING.
3. TURN MAIN DISCONNECT TO “OFF” POSITION. CAUTION: DO NOT USE
HYDRAULIC POWER WITH BRAKE DISENGAGED. BRAKE IS SPRING
LOADED. ALWAYS USE CAUTION, KEEP HANDS CLEAR OF MECHANISM.
4. ROTATE LOCK-OUT BLOCK WITH 3/4 INCH WRENCH AS SHOWN. TO
DISENGAGE BRAKE REMOVE WRENCH IMMEDIATELY. BRAKE WILL
RESET AUTOMATICALLY WHEN VEHICLE IS PUT BACK IN SERVICE.
A
106515AC
5. OPEN FREE WHEELING VALVE (IF SO EQUIPPED) BY TURNING CCW.
BEFORE PUTTING VEHICLE BACK INTO SERVICE TURN CW TO CLOSE.
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
55
SKYJACK® CONTROL PANEL DECALS
SJ111814
Emergency Stop
EMERGENCY
STOP111814AB
AJ
SJ130434
Control Up/Down
SJ130638
Drive/Lift
ZZ
ZZ
130638AB
130434AC
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
56
1-877-JLG-LIFT | www.jlg.com
SKYJACK® DANGER
SAFETY DECALS
DECALS
SJ115982
Drive Elevation
DANGER
SJ106406
DO NOT DRIVE THE ELEVATED
PLATFORM OVER UNEVEN TERRAIN
OR OBSTACLES HIGHER THAN 2
INCHES.
DEATH OR SERIOUS INJURY WILL
RESULT FROM IMPROPER USE OF
THIS EQUIPMENT.
Safety Bar
DANGER
Crushing
Hazard
Maintenance
support
Do not reach through scissors assembly when platform is raised without
maintenance support properly positioned.
Failure to avoid this hazard will result in death or serious injury!
115982AB
A
Proper use of maintenance support
*Remove all material from platform.
*Raise platform until there is adequate clearance to swing down maintenance
support.
*Swing maintenance support down from storage bracket into a vertical position.
*Remove hands and arms from scissors area.
*Lower platform until bottom end of maintenance support contacts labeled
cross bar and scissors are supported by maintenance support.
*Turn off main power disconnect switch.
SJ119866
Pinch
To store maintenance support
A
Scissors
cross bar
*Turn on main power disconnect switch and start engine (if equipped).
*Raise platform until there is adequate clearance to swing up maintenance
support.
*Swing up maintenance support into storage bracket.
*Lower platform.
106406AE
ZZ
119866AF
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
57
SKYJACK® ILLUSTRATION/PICTORAL DECALS
SJ102894
Fork
SJ102896
Fork Lift Boot
102896AC
ZZ
SJ105983
On/Off
ZZ
105983AB
102894AC
ZZ
SJ116577
SJ124362
SJ119674
Torque Hi/Low
Emergency Battery Disconnect
Do Not Wear
SJ123628
Operator’s Manual
+
12
ZZ
116577AC
ZZ
9
123628AD
ZZ
124362AD
SJ126056
Railing Height
Falling Hazard
SJ124767
Lift Point/Tie Down
SJ129838
Keep
43.75” (1.11 M) CE/ANSI/CSA/AS
41.50” (1.05 M) CSA/ANSI/AS
39.25” (0.99 M) ANSI / AS
ZZ
6
zz
119674AD
SJ125724
3
A
KEEP
129838AC
124767AB
ZZ
!
125724AB
SJ130018
Harness Anchor
SJ130634
Lift Up/Down/Drive
SJ129839
Clear
CLEAR
A
129839AC
ZZ
130018AA
ZZ
126056AB
ZZ
130634AC
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
58
1-877-JLG-LIFT | www.jlg.com
SKYJACK® ILLUSTRATION/PICTORAL
SAFETY DECALS
DECALS
SJ137988
Crush Hazard
!
ZZ
137988AB
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
59
SKYJACK® MISCELLANEOUS DECALS
SJ106691
SJ109442
Checklist
Emergency Lowering
Operator’s Checklist
Inspect and/or test the following daily or at the
beginning of each shift:
Operating and emergency controls.
Safety devices.
Personal protective devices.
Tires and wheels.
Outriggers (if equipped) and other structures.
Air, hydraulic and fuel system(s) (if equipped) for
leaks.
Loose or missing parts.
Cables and wiring harnesses.
Labels, warnings and operating manual(s).
Guardrail system.
Engine oil level (if equipped).
Battery fluid level.
Hydraulic oil level.
A
106691AC
EMERGENCY LOWERING PROCEDURE
1. Turn main power disconnect switch to
off position.
2. Locate holding valve manual override knob at the bottom of lower lift cylinder.
3. To override valve, push and turn knurled knob counterclockwise.
4. To override upper lift cylinder valve (if equipped), use access rod located on top of base,
push and turn counterclockwise.
5. Before lowering, confirm that all lift cylinder valves are in override position.
6. To lower platform, locate emergency lowering pull valve on hydraulic tray and pull.
7. Note: Before normal operation can be resumed, holding valve manual override knobs
on lift cylinders must be pushed and turned clockwise to engage the holding valves.
A
109442AF
SJ110333
110V AC Outlet
A
CONNECT PLATFORM
A.C. SUPPLY HERE110333AB
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
60
1-877-JLG-LIFT | www.jlg.com
SKYJACK® WARNING
SAFETY DECALS
DECALS
SJ106704
Description
SJ106703
WARNING
Orifice
WARNING
THE FITTING IN THIS CYLINDER IS
EQUIPPED WITH A LOWERING
SPEED ORIFICE. WHEN SERVICING
OR CHANGING THE CYLINDER, THIS
FITTING MUST BE RE-INSTALLED OR
REPLACED WITH AN IDENTICAL
NEW ONE.
106703AA
A
DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER AUTHORIZATION
AND TRAINING. IT IS THE OPERATOR’S RESPONSIBILITY TO:
1. READ AND COMPLETELY UNDERSTAND ALL DANGERS, WARNINGS, CAUTIONS
AND INSTRUCTIONS ON THE WORK PLATFORM AND IN THE OPERATING
MANUAL.
2. THE OPERATOR SHOULD BE ASSURED THAT THE WORK PLATFORM HAS BEEN
PROPERLY MAINTAINED AND INSPECTED IN ACCORDANCE WITH
GOVERNMENT REGULATIONS BEFORE USING IT.
3. PERFORM ALL DAILY MAINTENANCE INSPECTIONS.
*DO NOT EXCEED RATED LOAD.
*DO NOT RAISE THE PLATFORM WHEN ON A SOFT AND/OR SLOPED SURFACE.
RAISE THE PLATFORM ONLY WHEN ON A FIRM, LEVEL SURFACE. THE
PLATFORM CAN BE LEVELED WITH PROPERLY POSITIONED OUTRIGGERS (IF
EQUIPPED).
*DO NOT USE WITHOUT RAILINGS, GATE, ENTRY CHAINS OR RAILING LOCKING
PINS SECURED IN PLACE.
SJ106705
Do Not Alter
WARNING
Do not alter or disable
limit switches, safety
switches or interlocks.
106705AC
FAILURE TO OPERATE THIS EQUIPMENT IN ACCORDANCE WITH THE
OPERATING INSTRUCTIONS ON THIS EQUIPMENT AND IN THE OPERATING
MANUAL COULD RESULT IN SERIOUS INJURY OR EVEN DEATH!
A
106704AC
SJ115531
Falling
WARNING
AJ
FALLING HAZARD! DO NOT OPERATE MACHINE
WITHOUT SECURING PINS AT ALL HINGE POINTS.
115531AA
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
61
SNORKEL® CAPACITY DECALS
SN0073085
Platform Capacity 650
SN0090589
Platform Capacity 500
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
62
1-877-JLG-LIFT | www.jlg.com
SNORKEL® CONTROLSAFETY
PANEL DECALS
DECALS
SN0180846
Platform Control Box Front
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
63
SNORKEL® DANGER DECALS
SN0072530
SN0072541
Electric Hazard
Do Not Operate
SN0073298
SN0074210
Foam/Solid Tires
Electric/Tipping Hazard
SN0323897
SN0323896
You Must Not Operate
Electric Hazard
SN0323899
Electric Hazard
SN190989
Do Not Reach
DANGER
19-0989
DO NOT
REACH
THROUGH
HOLES.
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
64
1-877-JLG-LIFT | www.jlg.com
SNORKEL® ILLUSTRATION/PICTORAL
SAFETY DECALS
DECALS
SN0070540
Yellow Arrow
SN0070541
Blue Arrow
SN0071926
Diesel Fuel
007-0540
SN0080650
Lift
SN0071927
Hydraulic Oil
007-0541
SN0083426
Tie Down Symbol
SN0083431
Lift/Tie Down Location TB60
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
1-877-JLG-LIFT | www.jlg.com
65
SNORKEL® MISCELLANEOUS DECALS
SN0070922
SN0073667
Platform Rotator
Inspect Wire Ropes
SN0073492
Rotate While Greasing
SN0074209
Pre-Start Instructions Booms
SN0181562
Machine Complies With ANSI
This machine is manufactured
in compliance with
ANSI A92.5 or A92.6 - section 4.
0181562
All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by
those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the
color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective
owners and manufacturers.
THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED.
THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF
THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING
DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE.
66
1-877-JLG-LIFT | www.jlg.com
DECALS
1-877-JLG-LIFT | www.jlg.com
67
GENIE-INDEX
68
Part Number
Description
Page Number
Part Number
Description
Page Number
GN27204
Arrow Blue
6
GN72970
Charger Operation
7
GN27205
Arrow Yellow
6
GN82239
Latch
9
GN27206
Triangle Blue
6
GN82366
Chevron Rando
9
GN27207
Triangle Yellow
6
GN82447
Auxiliary Lowering
9
GN27867
Swivel Lock
6
GN82559
Instruction, Annual Inspect Req
7
GN28161
Warning, Crush Hazard Hand
8
GN82561
Danger, Use Safety Arm
5
GN28164
Notice, Hazardous Materials
9
GN82567
Ground Control Panel
9
GN28165
Instruction, Footswitch Oper
7
GN82657
Battery Connect
7
GN28171
Danger No Smoking
6
GN97547
Danger, Electric Hazard
5
GN28174
Power to Platform
6
GN97887
Max Side Force ANSI
7
GN28175
Warning, Compartment Access
8
GN97890
General Safety Rules
5
GN28176
Manual Not Here
9
GN28177
Warning, Crush Hazard
8
GN28236
Warning, Improper Operation
8
GN30080
Notice, Max Load 500lb
7
GN31060
Danger, Do Not Alter Switch
4
GN31508
Electric Hazard Plug
4
GN32932
Tip-Over Axles
4
GN33952
Danger, Tilt Alarm
4
GN40434
Lanyard Anchorage Point
6
GN43089
Instructions Operate, GCP
7
GN43091
Danger, General Safety
4
GN43093
Tire Specs
9
GN43617
Tip-Over Battery
4
GN43618
Direction Arrows
6
GN43619
Safety Arm
9
GN43647
Notice, Operate Instructions
9
GN43696
Danger, Electric Hazard GS
4
GN44255
Crushing Hazard
4
GN44737
Tip-Over Trays
4
GN44753
LED Readout
9
GN44980
Power To Charger 115V
6
GN46262
Danger, Battery Safety
4
GN52475
Label, Transport Tiedown
6
GN52494
Caution, Crush Hazard Rails
9
GN52865
Annual Inspection
8
GN65052
Fault Codes
9
GN72853
Danger, Improper Use Hazard
4
1-877-JLG-LIFT | www.jlg.com
JLG-INDEX
Part Number
Description
Page Number
Part Number
Description
Page Number
1700584
Patent (BLK)
43
1703072
No Forklift
36
1700818
LP Gas (ENG)
43
1703078
Legend
18
1701214
Warning, O/R (DOM/CSA)
45
1703084
Platform Display (CE)
18
1701499
No Tie Down/Lift
36
1703162
Fan Blade
36
1701500
Lift Here
36
1703175
Lanyard (GM,D-Rings)
43
1701502
Hydraulic Oil Level (High)
36
1703181
Warning, 500lb Capacity
45
1701504
Hydraulic Oil
36
1703398
Towing/Winch
41
1701505
Diesel
36
1703464
AC Power
43
1701509
Manual
36
1703465
MTB
18
1701518
Crushing
36
1703469
Max Tire Load
10
1701529
Arrow
36
1703470
Max Tire Load
10
1701542
Gasoline
36
1703472
Max Tire Load
10
1701640
Manual
36
1703475
Max Tire Load
10
1701644
Battery Charger
36
1703482
Max Tire Load
10
1701645
500lb Max Capacity
10
1703486
Max Tire Load
10
1702153
Inspection (DOM)
40
1703488
Max Tire Load
10
1702155
Battery Disconnect
36
1703493
Max Wheel Load
10
1702265
Manual Descent
40
1703678
Horn, Drive Speed, Level
18
1702276
Attach Safety Belt Here
43
1703681
JLG
33
1702294
No Hands
16
1703687
Direction Arrow
36
1702387
Platform Display
17
1703689
Horn, Drive Speed, Level
18
1702564
Stop
17
1703694
Capacity
10
1702565
Drive Steer
17
1703695
Legend
18
1702566
Lift Swing
17
1703696
Gradeability
40
1702567
Function Speed
17
1703697
Safety Prop
36
1702610
Ground Control Display
17
1703698
Towing
41
1702612
Lanyard (D-Ring)
43
1703706
Ground Control
18
1702676
Horn
17
1703797
Warning/Danger Platform
51
1702688
500lb Capacity
10
1703798
Warning/Danger MTB
51
1702784
Legend
17
1703804
Warning, Crushing
45
1702785
Warning/Danger
51
1703805
Danger, Electrocution
35
1702861
JLG Lift 8"
33
1703808
Legend, MTB
18
1702868
No Hands
16
1703813
Warning, Battery Ventilation
45
1702901
Manual Descent
41
1703814
Tie Down
37
1702908
Manual Descent
41
1703815
Attach Lanyard Here
43
1702961
Warning, Prop 65/Gas
45
1703816
Warning/Danger
51
1702962
Warning, Prop 65/DSL
45
1703817
Fork Lift
37
1702966
500lb Capacity
10
1703818
Warning, Crush Hazard
52
1-877-JLG-LIFT | www.jlg.com
69
JLG-INDEX
70
Part Number
Description
Page Number
Part Number
Description
Page Number
1703819
Direction Arrow
37
1704465
MTB 400S
19
1703822
Manual Descent Instructions
37
1704479
Warning, Battery
46
1703823
Danger, Electrocution Hazard
35
1704480
Legend
20
1703868
Capacity 1932E2
10
1704484
Platform Display (DOM)
20
1703870
Wheel Load 1932E2
11
1704485
Platform Display
20
1703924
Warning, Platform (CAN)
52
1704487
Platform Disp (DOM) (750lb)
20
1703936
Danger (CAN)
35
1704502
Symbol Legend For Crawler
20
1703942
Warning, Crushing (CAN)
45
1704521
Gradeability
40
1703948
Warning, Crushing (CAN)
45
1704540
Storage Capacity
11
1703953
Warning, Crushing
45
1704559
Max Tire Load
11
1703960
Max Wheel Load
11
1704575
Warning/Danger MTB
52
1703984
Warning, Foot Switch (CAN)
46
1704707
Platform Display (DOM)
21
1703996
230kg/500lb Max Capacity
11
1704726
Lock Latch
37
1704000
Caution No Hands (CAN)
16
1704752
Max Tire Load 7200lb
11
1704016
Forklift Location
37
1704789
E450AJ
33
1704017
Brake Release Instructions
41
1704827
Max Tire Load 6200lb
11
1704096
Warning, Dual Cap (DOM)
46
1704828
Max Tire Load 8350lb
11
1704104
Warning, Dual Cap (DOM)
46
1704829
Max Tire Load 7200lb
12
1704125
Air Lead
37
1704903
Gradeability
40
1704134
Tire Max
11
1704952
Platform Display
21
1704192
Stop
18
1704993
Light Panel 750lb (DOM)
21
1704201
Capacity (ANSI)
11
1704995
Warning, 750/500 Cap (Platf)
46
1704239
Platform Display
19
1704996
Warning, 750/500 Cap (DOM)
46
1704240
Horn And Positrack
19
1704997
Stop
21
1704248
Battery Charger Instructions
40
1705015
Legend
21
1704252
Legend (MTB)
19
1705016
Manual Descent
37
1704253
Legend (Platform)
19
1705020
Capacity (2250lb-1020kg)(EXT)
12
1704260
EMS (Euro Requirement)
37
1705021
Capacity (1500lb-681kg)(EXT)
12
1704277
Lanyard Attachment
37
1705042
Max Load (Jacks)
12
1704340
Warning, Battery Vent (CAN)
46
1705059
Dual Cap 500lb (DOM) MTB
12
1704399
Wheel Load 1932E2
11
1705088
Warning, Dual Cap 500 (DOM)
46
1704401
Wheel Load 2032E2 (CE)
11
1705089
Warning, Dual Cap 500 MTB
47
1704403
Wheel Load 3246E2
11
1705096
Lift Diagram (1200/1350)
37
1704412
Oil Chart
43
1705132
Control ADE
43
1704432
Warning, Crushing
46
1705167
26250 Max Tire Load
12
1704445
Max Tire Load
11
1705168
Warning, Platf Cap 1200/1350
47
1704446
Charging Instructions
40
1705170
Headlight
21
1704460
Drive & Steer
19
1705171
Jib Stow
21
1-877-JLG-LIFT | www.jlg.com
JLG-INDEX
Part Number
Description
Page Number
Part Number
Description
Page Number
1705173
Platform Display (DOM)
21
1705828
Footswitch (CE)
38
1705174
Stop
22
1705834
Battery Charging
43
1705175
Function Speed
22
1705850
Platform Color (Pro-Fit)
43
1705178
Max Tire Load 25000lb
12
1705864
JLG 12"
33
1705181
Dual Capacity 1200SJP
12
1705880
Cap (500lb/227kg/800lb/363kg)
13
1705190
Legend (ENG)
22
1705911
Nameplate/Load
23
1705212
Light Display (Ce)
22
1705912
Platform Box
23
1705303
CSA
43
1705913
Platform Display
24
1705309
Platform Legend 1350SJP
22
1705914
Platform Box
24
1705336
Warning, Inspection 1350SJP
47
1705941
Cap (500lb/227kg/800lb/360kg)
13
1705337
Warning,Tip-Over(BCS)1350SJP
47
1705947
Platform Display
24
1705351
Drive/Steer Instructions (DOM)
22
1705948
Platform Box
24
1705365
Load Management (BCS)
40
1705950
Platform Box
24
1705374
240V 60HZ
43
1705973
Platform Display 1250AJ
24
1705375
240V 3 Phase 60HZ
43
1705978
230Kg Capacity
14
1705387
Warning, Danger High Voltage
47
1706100
Gooseneck 10
38
1705429
Drive/Steer Instr (ENG/FR)
22
1706106
Capacity MTB T350
14
1705460
Sky Power
33
1706107
Capacity Platform T350
14
1705492
Warning, Tip-Over Platform
47
1706108
Legend Platform T350
24
1705638
Capacity (500lb-230kg)
12
1706111
Warning, Machine Operation
48
1705639
Capacity (800lb-363kg)
12
1706112
Warning, Speed Limit
48
1705640
Capacity (1000lb-454kg)
13
1706126
Max Tire Load
14
1705641
Capacity (1000lb-454kg)
13
1706128
Danger, Electrocution
35
1705647
Tire Load (1365lb/620kg)
13
1706135
Warning, Inspection
48
1705679
Warning, Inspection (Platform)
47
1706170
Gooseneck 6
38
1705680
Warning, Tip-Over/Crush/Fall
47
1706263
Brake Set
38
1705681
Electrocution
35
1706296
Battery Warning Lull
48
1705686
Legend (1930ES)
22
1706298
Warning, Carry Personnel
48
1705692
Control Box Location
38
1706300
Ether Warning
48
1705693
Safety Prop
38
1706302
Warning, Pinch Point Boom
48
1705694
Warning, Crushing 1930ES
47
1706306
Warning, Tip-Over Hazard
48
1705695
Electrocution 1930ES
35
1706310
Tire Load (1835lb/832Kg)
14
1705699
MTB 500lb Capacity (1930)
13
1706311
Tire Load (2070lb/939Kg)
14
1705744
Horn
23
1706350
Cover
38
1705745
Function Speed
23
1706385
Warning, Drop Bar
48
1705753
MTB CE (800A)
23
1706386
Warning, Fall Hazard
48
1705754
JLG 3.5"
33
1706387
Warning, Crushing Platform
48
1705781
JLG Logo 2.75"
33
1706667
1230ES
33
1-877-JLG-LIFT | www.jlg.com
71
JLG-INDEX
72
Part Number
Description
Page Number
Part Number
Description
Page Number
1706670
1230ES Manual Descent
38
3252689
Capacity
15
1706671
1230ES Wheel Load
14
3252694
Capacity (800lb-365kg)
15
1706676
1230ES Instructions/Warning
52
3252751
Capacity (EXT Deck)C/D/L/B/J
15
1706708
Legend (Platform)
25
3252752
Capacity (EXT Deck)C/D/L/B/J
15
1706709
Legend (MTB)
25
3252761
120V
44
1706712
Display Panel (MTB)
25
3252768
Lift Diagram 450A (DOM)
38
1706741
Boom Control Select
38
3252781
Lift Diagrm 800S (DOM)
38
1706751
Legend
25
4100181
Hydraulic Oil
38
1706765
Voltage Warning
48
4105262
Boom Angle Indicator
15
1706768
Warning, Vehicle Roll Away
48
4107462
Side Console
28
1706832
1230ES Electrocution
35
4108302
Hydraulic Oil Level
38
1706890
Getting Started
41
4110188
Overlay LH
29
1706897
Quick Refernce
41
4110226
Lift Point/Tie Down
39
1706914
MTB
26
4110422
Warning, Swing Loads
49
1706924
Finishing
42
90553027
Warning Decal
49
1706926
User Flash Codes
26
91143282
Warning Decal
49
1706931
Legend
26
91143284
Warning Decal
49
1706941
Legend MTB
26
1001102601
MTB 600S
29
1706942
Max Tire Load
14
1001107849
Platform Display
29
1706946
MTB
27
1001107850
Platform Display
29
1706950
Legend MTB
27
1001107851
Platform Display
30
1707013
500 lb Max Capacity 600SJ
14
1001107926
Platform Display
30
1707014
Warning, Dual Capacity
14
1001107952
Platform Display (CE)
30
1707015
Warning, Dual Capacity
49
1001107954
Platform Display 800S
30
1707055
500Lb Cap (ENG/FRE/CAN)
14
1001108494
Legend (Platform) 600SC
31
1707110
Legend Platform
27
1001121803
Max Capacity 500lb/227kg
15
1707111
Platform Display (DOM)
28
1001121813
Warning, Dual Capacity (ANSI)
49
1707113
Platform Display (EURO)
28
1001122507
Warning, Dual Capacity (ANSI)
50
3251102
Generator
38
1001122516
Warning, Dual Capacity (ANSI)
50
3251243
120V-60Hz
43
1001126742
Warning, Sky Glazier Capacity
50
3251813
Built In The USA
43
1001091272
Icon (DOM)
29
3252347
Warning, Footswitch
49
1001092071
No Pipe Racks Allowed
40
3252369
Warning/Danger
53
1001094359
Troubleshooting ES
42
3252542
Controller Lid
28
1001101420
Warning, Sky Glazier Capacity
49
3252598
Model Tag 1932E2
34
1001107527
Stop
29
3252602
Box Lid W/ Tilt & BD
28
1001107853
Platform Display
30
3252620
Controller Box Lid
28
1001107927
Platform Display
30
3252672
Lift Diagram 400 (DOM)
40
1001107953
Platform Display (860SJ)
30
1-877-JLG-LIFT | www.jlg.com
JLG-INDEX
Part Number
Description
Page Number
1001108492
Legend (Platform) 400S
31
1001108493
Legend (Platf)
450A/450AJ/510AJ/600A/600S
31
1001108495
Legend (Platf)
740AJ/800A/800AJ
31
1001108496
Legend (Platform) 800S
32
1001110226
Light Display
32
1001117185
Warning/Instruction (DOM)
53
1001121657
Platform Display (CE)
32
1001121800
Warning, Dual Capacity (DOM)
49
1001121801
Max Capacity 500lb/227kg
15
1001121814
Warning, Maximum Cap
(DOM)
50
1001122369
Warning, Dual Capacity
50
1001122384
Light Panel (Platform)
32
1001122508
Warning, Dual Capacity
50
1001131168
Stop & Auxillary Power
32
1001132175
Stop & Generator
32
1-877-JLG-LIFT | www.jlg.com
73
SKYJACK-INDEX
74
Part Number
Description
Page Number
SJ102894
Caution, Fork
58
SJ102896
Fork Lift Boot
58
SJ105983
On/Off
58
SJ106406
Danger,Safety Bar
57
SJ106515
Caution, Brake
55
SJ106691
Checklist
60
SJ106703
Warning, Orifice
61
SJ106704
Warning, Description
61
SJ106705
Warning, Do Not Alter
61
SJ109442
Emergency Lowering
60
SJ110333
110v AC Outlet
60
SJ111814
Emergency Stop
56
SJ115531
Warning, Falling
61
SJ115982
Danger, Drive Elevation
57
SJ116577
Torque Hi/Low
58
SJ119674
Emergency Battery Disconnect
58
SJ119866
Danger, Pinch
57
SJ123468
700 lb Capacity
54
SJ123628
Operator's Manual
58
SJ124362
Warning, Do Not Wear
58
SJ124465
Side Force
54
SJ124767
Lift Point/Tie Down
58
SJ125724
Railing Height
58
SJ126056
Falling Hazard Decal
58
SJ126505
Side Force/No Wind
54
SJ129838
KEEP
58
SJ129839
CLEAR
58
SJ130018
Harness Anchor
58
SJ130315
Platform Capacity
54
SJ130434
Control Up/Down
56
SJ130634
Lift Up/Down/Drive
58
SJ130638
Drive/Lift
56
SJ132333
Platform Capacity
54
SJ132713
Wheel Load
54
SJ137988
Crush Hazard
59
1-877-JLG-LIFT | www.jlg.com
SNORKEL-INDEX
Part Number
Description
Page Number
SN0070540
Yellow Arrow
65
SN0070541
Blue Arrow
65
SN0071926
Diesel Fuel
65
SN0071927
Hydraulic Oil
65
SN0072530
Danger, Electric Hazard
64
SN0072541
Danger Do Not Operate
64
SN0073085
Platform Capacity 650
62
SN0073298
Danger, Foam/Solid Tires
64
SN0073492
Rotate While Greasing
66
SN0073667
Inspect Wire Ropes
66
SN0074210
Danger, Electric/Tipping
Hazard
64
SN0080650
Lift
65
SN0083426
Tie Down Symbol
65
SN0083431
Lift/Tie Down Location TB60
65
SN0090589
Platform Capacity 500
62
SN0180846
Platform Control Box, Front
63
SN0181562
Machine Complies With ANSI
66
SN0323896
Danger, Electric Hazard
64
SN0323897
Danger, You Must Not Operate
64
SN0323899
Danger, Electric Hazard
64
SN190989
Danger, Do Not Reach
64
SN0070922
Platform Rotator
66
1-877-JLG-LIFT | www.jlg.com
75
JLG Industries, Inc.
1 JLG Drive
McConnellsburg, PA 17233-9533
Telephone 717-485-5161
Toll-free in US 877-JLG-LIFT
Fax 717-485-6417
www.jlg.com
An Oshkosh Corporation Company
Form No.: CMP-DECAL-1112
Part No.: 401004
R012813
Printed in USA