Download iSR6200 Command Line Interface (CLI) User's Guide

A
Log Messages
Table B-1. All iSR6200 Log Messages (Continued)
ID
Log Message
Module
Type
Msg.
Type
Description
41107
QLBA_DisplayInitiatorOperationStatus:
Transport Error, Status 0x%.2x
App
Error
Process control block status indicates that a transport
error (protocol) occurred during an initiator operation.
41111
QLBA_DisplayInitiatorOperationStatus:
Data Overrun, Status 0x%.2x
App
Error
Process control block status indicates that a data
overrun error occurred during an initiator operation.
41234
QLIS_LoginPduContinue: Operation failed.
Initiator 0x%x, TPB status 0x%x
App
Error
iSCSI login failed between receipt of protocol data
unit (PDU) and request for the data segment.
41238
QLKV_ValidateLoginTransitCsgNsgVersion
failed (status 0x%x)
App
Error
iSCSI login failed due to unsupported version number
in received login PDU.
41257
QLIS_LoginPduContinue: Invalid initiator
name. Initiator:
App
Error
iSCSI login PDU contains invalid initiator name. The
format and character set used to form the initiator
name is invalid.
41265
QLIS_LoginPduContinue: Target not
configured for Portal
App
Error
iSCSI target login was attempted to a portal (iSCSI1
or iSCSI2) on which the target is not presented.
41267
QLIS_LoginPduContinue: Target not found.
Target name:
App
Error
iSCSI login PDU received for a target with a target
name unknown to the router.
41268
QLIS_LoginPduContinue: Missing target
name
App
Error
iSCSI login PDU received without a target name for a
normal session.
41270
QLIS_LoginPduContinue: TSIH is 0 but
InitiatorName key/value not provided
App
Error
iSCSI login PDU received without an initiator name
key/value.
ISR654601-00 A
B-3