Transcript
09/14-W2010-Wei Instruction Manual 738 373 1 6 7 2 8 3 4 9 Turn Signal Control 1 2 3 4 5 6 7 8 9 10 T30 power supply connection T49a connection Left (L) and right (R) turn signal connections T49 connection Ground connection T15 power supply connection Control lamp 2 (trailer) connection Control lamp connection Turn signal relay Base for Convenience turn signal control unit, 738 372 (not included in the delivery!) 10 5 1 Description This "turn signal control" helps a.) teach how a turn signal relay works, with the option to control the turn signal control lamp as well as an additional control lamp for the trailer, and b.) teach the operating principle of a convenience turn signal module, which supplements the component retrofitting with the "one-touch turn signal" function (1 tap: 3 blinks). 2 3 Scope of Supply Safety notes - The device is appropriate for dry, interior use only! - Do not operate the device if it exhibits visible damage. - Use only safety bridging plugs and intact safety connection leads! - Only use the device for training purposes. Installation in an actual vehicle is prohibited! - Be sure to use only genuine replacement parts for any necessary repairs! Turn signal control experimental board Technical Data Supply voltage: UB = +12–15 V= Control: plus Design: 2+1x21 W (6x21 W) LD DIDACTIC GMBH Leyboldstrasse 1 D-50354 Huerth / Germany Phone +49 (0)2233 604-0 Fax +49 (0)2233 604-222 e-mail: [email protected] by LD Didactic GmbH Printed in the Federal Republic of Germany Technical alterations reserved
