Transcript
VORMAX™ VORMAX™ Trip Lever; VorMax Trip Lever; VorMax PART NUMBERS: 7381458-200.xxx0A - ESTATE 7381457-200.xxx0A - OPTUM 7381459-200.xxx0A - ESTEEM PART NUMBERS: 7381458-200.xxx0A - ESTATE 7381457-200.xxx0A - OPTUM 7381459-200.xxx0A - ESTEEM To Remove Trip Lever: • Turn off water supply; flush toilet • Remove hair pin FIGURE 1 • Remove clevis pin; this frees the teeter bar from the trip lever arm FIGURE 1 • Loosen nut to remove from trip lever FIGURE 2 • Remove old trip lever • Insert new trip lever and tighten nut CLEVIS ➞ PIN ➞ To Reconnect Trip Lever: • Insert the trip lever arm in to the yoke FIGURE 1 • Push the clevis pin through the arm FIGURE 1 • Insert the hair pin FIGURE 1 HAIR PIN YOKE ➞ Complete by Adjusting the Settings: •D epress trip lever handle all the way (A) • Adjust screw on the teeter bar (B) so rear frame (C) touches the frame stop (D) • Return trip lever handle (A) to rest position. •M ake sure hook (E) is fully engaged under tab on valve body (F), if not, slightly adjust screw to make sure hook is engaged. •T urn water supply on; adjust water level to specified dimension on back of tank and flush 5 times to prime FIGURE 1 HOOK CROCHET LOOSEN (B) (C) (A) (D) FIGURE 2 (E) www.americanstandard-us.com/vormaxparts Product names listed herein are trademarks of AS America Inc. © AS America Inc. 2014 (F) www.americanstandard-us.com/vormaxparts 1 7302171-104 Product names listed herein are trademarks of AS America Inc. © AS America Inc. 2014 2 7302171-104