Transcript
K-5841 OFFSET KITCHEN SINK Roughing-In Product Information Applicable product: Self-rimming kitchen sink with two holes Self-rimming kitchen sink with four holes Undercounter kitchen sink with four holes Fixture*: Sink Basin area, large Recommended accessories: P-Trap K-5841-2 K-5841-4 K-5841-4U Optional accessories: Bottom basin rack, left basin Bottom basin rack, right basin Duostrainer® sink strainer Install this product according to the installation guide. NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Basin depth Drain hole Faucet hole Self-rimming models 1-3/8″ (3.5 cm) D. Undercounter model 2-3/8″ (6 cm) D. * Approximate measurements for comparison only. Included component: Cut-out template Undermount sink kit 23″ (58.4 cm) 2-1/4" (5.7 cm) 2-1/4" (5.7 cm) K-6160 K-6162 K-8801 Installation Notes 17-1/8″ (43.5 cm) x 18-5/16″ (46.5 cm) 11-1/16″ (28.1 cm) x 17-5/16″ (44 cm) 9″ (22.9 cm) 3-7/8″ (9.8 cm) D. Basin area, medium K-9000 Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All dimensions are nominal. 1148647-7 1054375 K-5841-4 13-1/2" (34.3 cm) 4" (10.2 cm) 4" (10.2 cm) 6-3/4" (17.1 cm) 2-5/16" 2-1/4" (5.9 cm) (5.7 cm) 2-1/4" (5.7 cm) K-5841-2 13-1/2" (34.3 cm) 2-5/16" (5.9 cm) 9-1/4" (23.5 cm) 2-1/4" (5.7 cm) 2-1/4" (5.7 cm) 7-11/16" (19.5 cm) 4" (10.2 cm) 18-1/8" (46 cm) 33" (83.8 cm) 9/16" (1.4 cm) 9-5/8" (24.4 cm) 15" (38.1 cm) 1-1/2" OD OFFSET KITCHEN SINK 1148646-1-B K-5841-4U 13-1/2" (34.3 cm) 1-1/2" OD 22" (55.9 cm) 4" (10.2 cm) 2-5/16" (5.9 cm)