Transcript
K-RH6482 BELLEGROVETM TOP-MOUNT KITCHEN SINK Roughing-In Product Information Applicable product: Top-mount kitchen sink with four holes Recommended accessories: P-Trap K-RH6482-4 Installation Notes Fixture*: Bowl area 29-3/4″ (756 mm) x 18″ (457 mm) Bowl depth 9″ (229 mm) Drain hole Ø 3-7/8″ (98 mm) Faucet hole Ø 1-3/8″ (35 mm) * Approximate measurements for comparison only. Included component: Cut-out template Install this product according to the installation guide. NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All dimensions are nominal. 1159401-7 Optional accessories: Sponge caddy Bottom bowl rack, left Bottom bowl rack, right Duostrainer® sink strainer Cast iron cleaner, 8 oz (0.2 L) K-9000 K-6545 K-6640 K-6659 K-8801 1012525 4" (102 mm) 16-1/2" 14-3/16" (419 mm) (360 mm) 2-5/16" (59 mm) 8-1/8" (206 mm) 22" (559 mm) 7" (178 mm) 26" (660 mm) 33" (838 mm) 9-5/8" (244 mm) 9/16" (14 mm) 15" (381 mm) 1-1/2" OD BELLEGROVETM TOP-MOUNT KITCHEN SINK 1192045-1-A