Transcript
K-5870 WHEATLANDTM OFFSET KITCHEN SINK Roughing-In Product Information Applicable product: Top-mount kitchen sink with two holes Top-mount kitchen sink with four holes Under-mount kitchen sink with five holes Fixture*: Bowl area, large Recommended accessories: P-Trap K-5870-2 K-5870-4 K-5870-5U 17-1/4″ (438 mm) x 18-3/4″ (476 mm) 11-1/8″ (283 mm) x 15-7/8″ (403 mm) 9″ (229 mm) Ø 3-7/8″ (98 mm) Bowl area, medium Bowl depth Drain hole Faucet hole Top-mount models Ø 1-3/8″ (35 mm) Under-mount model Ø 2-3/8″ (60 mm) * Approximate measurements for comparison only. Included component: Cut-out template Under-mount sink kit K-9000 Optional accessories: Bottom bowl rack, left bowl Bottom bowl rack, right bowl Duostrainer® sink strainer K-6148 K-6159 K-8801 Installation Notes Install this product according to the installation guide. NOTICE: The countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by the Kohler Co. (Call 1-800-4-KOHLER.) Kohler Co. is not responsible for cut-out errors when the incorrect cut-out template is used. Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All dimensions are nominal. 1148511-7 1054375 K-5870-4 17-5/16" 13-7/16" (440 mm) (341 mm) 2-5/16" 4" (102 mm) 4" (102 mm) (59 mm) 9-7/16" (240 mm) K-5870-2 2-1/4" (57 mm) 2-5/16" (59 mm) 6-11/16" (170 mm) 2-5/16" (59 mm) 13-7/16" (341 mm) 17-5/16" (440 mm) K-5870-5U 13-7/16" 17-5/16" (341 mm) (440 mm) 11" (279 mm) 4" (102 mm) 3-1/2" (89 mm) 7-1/16" (179 mm) 23" (584 mm) 33" (838 mm) 9/16" (14 mm) 9-5/8" (244 mm) 15" (381 mm) 1-1/2" OD WHEATLANDTM OFFSET KITCHEN SINK 1148508-1-C 22" (559 mm) 2-1/4" (57 mm) 2-1/4" (57 mm)
