Transcript
K-5846 BROOKFIELDTM KITCHEN SINK Roughing-In Product Information Applicable product: Under-mount kitchen (shown) Under-mount kitchen Under-mount kitchen Under-mount kitchen Fixture*: Basin area Water depth Drain holes Faucet holes sink with one hole K-5846-1 sink with three holes sink with four holes sink with five holes K-5846-3 K-5846-4 K-5846-5U Recommended accessories: P-Trap K-9000 Optional accessories: Bottom bowl rack, left basin Bottom bowl rack, right basin Duostrainer® sink strainer K-6169 K-6197 K-8801 Installation Notes Install this product according to the installation guide. 14-3/16″ (360 mm) x 16-1/16″ (408 mm) 9″ (229 mm) Ø 3-7/8″ (98 mm) Top-mount: Ø 1-3/8″ (35 mm) Under-mount: Ø 2-3/8″ (60 mm) NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Fixture dimensions are nominal and conform to tolerances in ASME Standard A112.19.1/CSA B45.2. * Approximate measurements for comparison only. Included components: Cut-out template Under-mount sink kit 23″ (584 mm) 1174556-7 1054375 K-5846-3 4" (102 mm) 12-1/2" (318 mm) K-5846-1 16-1/2" (419 mm) 2-1/16" (52 mm) 9-15/16" (252 mm) 22" (559 mm) K-5846-4 4" (102 mm) 12" (305 mm) 2-1/16" (52 mm) 2-11/16" (68 mm) 1/2" (13 mm) 9-5/8" (244 mm) 15" (381 mm) 1-1/2" OD BROOKFIELDTM KITCHEN SINK 1179926-1-A 4-1/2" (114 mm) 2-11/16" (68 mm) K-5846-5U 6-1/4" (159 mm) 33" (838 mm) 2-1/16" (52 mm) 4" (102 mm) 12" (305 mm) 4-1/2" (114 mm) 2-1/16" (52 mm)