Transcript
Krell Audio Components KPE 03/13/2007 04:44 PM The Reference KPE and Standard KPE components are high performance phono preamplifiers designed to work with any moving coil cartridge. The Standard KPE Phono Preamplifier also supports moving magnet cartridges. Both versions offer a wide range of impedance selection for precise cartridge/phono preamplifier matching. Reference KPE The Reference KPE is optimized for use with moving coil phono cartridges. The Reference KPE comes factory set with a 70 dB gain and a 100 Ohm load impedance setting. The available gain settings include 58, 64, 70, and 76dB. Cartridge loading choices include 10, 25, 47, 100, 249, 475, 825, and 1000 Ohms. Standard KPE The Standard KPE is designed to use either a moving coil or moving magnet phono cartridge. The Standard KPE comes factory set in the high-gain, moving coil position with a 100 Ohm load impedance setting. Cartridge loading choices include 10, 25, 47, 100, 249, 475, 825, 1,000, and 47000 Ohms. http://www.krellonline.com/krell_component.php?id=54&page=KPE Page 1 of 1
