Transcript
Type EZR regulators are easily adaptable to Fisher’s RegFlo™ pressure and flow instruments. Engineering the flow. Type EZR’s patented metal plug provides tight shutoff. The revolutionary flow path of the Type EZR not only minimizes the damage from debris, but also provides enhanced noise reduction. A smooth flow geometry and enlarged flow recovery area, as compared to present boot-style regulators, give Fisher the ability to build a regulator that operates more quietly than ever before. Type EZR’s patented travel indicator makes maintenace easier. Type EZR Pressure Regulator Type EZR has a patented diaphragm With Advanced designed to withstand more wear and Flow Technology tear, and generally prolong the life of the regulator. The stainless steel inlet screen prevents large particles from entering the regulator. Type EZR Pressure Regulator for the gas utility industry Tight shutoff Long life Quiet operation Easy maintenance In stock, immediately available Sizes: 1, 2, 2 x 1, 3, 4, 6 x 4, 8 x 4, 6, 8 x 6, 12 x 6, 8-inch (DN 25, 50, 50 x 25, 80, 100, 150 x 100, 200 x 100, 150, 200 x 150, 300 x 150, 200) Relief pilot configurations also available New – Type EZR OSX slam-shut valve may be preset to totally and rapidly cut off gas flow relative to over- or underpressure conditions of the pipeline. D350717X012 © 2005, 2006 Fisher Controls International, LLC. All rights reserved. Printed in the U.S.A. Trademarks are property of divisions of Emerson Process Management. For more information, call 1-800-558-5853 Outside U.S. 1-469-293-4201 Fax 1-972-471-2394 e-mail: [email protected] or visit us at our website: www.emersonprocess.com/regulators