Transcript
WILLIAMSBURG™ PEDESTAL LAVATORY VITREOUS CHINA WILLIAMSBURG LAVATORY WITH PEDESTAL • Vitreous china • Turn-of-the-century detailing on lavatory and pedestal • Front overflow • Supplied with mounting kit • Faucet ledge with large deck area (faucet not included) ❏ 0555.800 (Illustrated) Faucet holes on 203mm (8") centers ❏ 0555.400 Faucet holes on 102mm (4") centers Nominal Dimensions: 619 x 495 x 900mm (24-3/8" x 19-1/2" x 35-7/16") ❏ ❏ ❏ 0555.008 Lavatory slab-203mm (8") centers FINISHED WALL 203mm (8) 89mm (3-1/2) 0555.004 Lavatory slab-102mm (4") centers 212mm (8-1/2) 734906-400 Pedestal only 495mm (19-1/2) ▼ PEDESTAL ANCHORING SCREW HOLES 8mm (5/16) DIA. Bowl sizes: 489mm (19-1/4") wide, 289mm (11-3/8") front to back, 146mm (5-3/4") deep 619mm (24-3/8) ■ 260mm (10-1/4) REF. Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures 203mm (8) SUPPLIES AS REQUIRED 578mm *(22-3/4) 1-1/4 O.D. WASTE 521mm *(20-1/2) ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: ❏ Nipple: * See faucet section for additional models available 178mm (7) 900mm (35-7/16) 1-1/4 O.D. TAILPIECE To Be Specified Color: White 51mm (2) ■ 203mm (8) ❏ 13mm (1/2) DIA. HOLES FOR ANCHOR BOLTS FINISHED FLOOR 229mm (9) NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED. ▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED. ■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. * SPS 0555 © 2004 American Standard Inc.