Download American Dryer Corp. AD-78 II User's Manual

AD-78 II
Parts Manual
2001-2002
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450576
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
AD-78 II
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
OPL Control Door Assembly .................................................................................................................. 2
Control Door (Coin Models) .................................................................................................................. 3
Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 4
Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5
Coin Vault Assembly ............................................................................................................................... 6
Front Panel Assembly ............................................................................................................................. 7
Main Door Assembly (Round Door) ....................................................................................................... 8
Main Door Switch Assembly For Round Main Door ............................................................................... 9
Sensor Bracket Assembly ..................................................................................................................... 10
Lint Trap Assembly ............................................................................................................................... 11
Drop Lint Door Assembly ..................................................................................................................... 12
Basket (Tumbler) Support Assembly ..................................................................................................... 13
Idler Bearing Assembly ......................................................................................................................... 14
Basket (Tumbler) Bearing Assembly ...................................................................................................... 15
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 16
3-Phase (3ø) Motor, Non-Reversing Electric Relay Panel Assembly ...................................................... 17
3-Phase (3ø) Motor, Reversing Electric Relay Panel Assembly ........................................................ 18, 19
Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 20, 21
Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 22, 23
Hot Surface Ignition (HSI) Burner Assembly
CE Export ................................................................................................................................... 24, 25
Direct Spark Ignition (DSI) Burner Assembley
For Models Mfd. as of April 11, 2000 ......................................................................................... 26, 27
Sail Switch Assembly ............................................................................................................................ 28
Back Guard Assemblies ........................................................................................................................ 29
Microprocessor Coin Acceptors Listing ................................................................................................ 30
Additional Parts Available ..................................................................................................................... 31
2
OPL Control Door Assembly
Illus. No.
Part No.
Qty.
1
883244*
1
2
3
4
5
6
150134
150317
117605
117604
881053
2
2
2
2
1
*
Description
Control Door Assembly
(includes illus. nos. 1, 4, and 5)
#10-32 x 1/2” TORX Screw
#10-16 x 3/4” TORX Screw
1/4” x 3/8” Neoprene Sponge Tape
1/8” x 3/8” Neoprene Sponge Tape
ADC Logo with Adhesive Tape
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Control Door (Coin Models)
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
883243**
117605
150317
160015
160052
160104
881053
1
2
2
2
1
*
1
3
Description
Control Door without Locks
1/4” x 3/8” Neoprene Sponge Tape
#10-16 x 3/4” TORX Screw
MK-100 Lock ONLY
1” Cam
MK-100 Key ONLY
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
Part No.
Qty.
112535
112276
112275
1
1
1
112277
1
112278
1
801255
801256
801206
1
1
1
801207
1
137222
137231
824998
153010
150005
150413
136048
1
1
1
2
2
1
1
Description
OPL English Keyboard (touch pad) Label Assembly
OPL Stick-On Labels (English Only)...Not Illustrated
3-Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew)...Not Illustrated
3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
Phase 5 Microprocessor Control Panel ONLY
Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 6)
Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
Phase 5 OPL Non-Reversing Controller ONLY
Phase 5 OPL Reversing Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” TORX Head Crimptite Screw
1/8-Amp (slo blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
Part No.
Qty.
112526
883254
1
1
5
6
7
883253
150309
137213
824998
153010
150005
--------
1
1
1
1
2
2
1
8
9
152102
136048
4
1
3
4
Description
Coin Keyboard (touch pad) Label Assembly
Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
Coin Control Panel ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 30)
Hex Nut
1/8-Amp (slo blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller.
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Coin Vault Assembly
Illus. No.
Part No.
Qty.
1*
2**
3**
4
880118
160036
160136
880117*
1
1
1
1
5
152014
4
Description
Coin Box Assembly ONLY Less Lock
ACE® Lock Assembly with Key
ACE® Key ONLY
Coin Vault Assembly ONLY Less Lock
(includes illus. nos. 1, 4, and 5)
1/4-20 Free Spin Wash Nut
* Specify color when ordering.
** Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Front Panel Assembly
Illus. No.
Part No.
Qty.
1
883246*
1
883245
1
4
5
150313
150318
116147
116320
116321
122002
881987
11
**
2
1
1
1
1
6
154215
2
2
3
Description
Right Hand Front Panel Assembly (for OPL models)
(includes illus. nos. 1, 3, 5, and 6)
Right Hand Front Panel Assembly (for coin models)
(includes illus. nos. 1, 3, 5, and 6)
#10-16 x 1/2” TORX Plus BTN Type 1
25IP Stick-Fit TORX Plus Bit
13 x 18-1/2” Rear Lower Wall Insulation
Top Front Panel Insulation
Bottom Front Panel Insulation
Lint Drawer Switch
Friction Door Latch Kit
(includes illus. nos. 5 and 6)
5/32” Pop Rivet
* Specify color when ordering.
** As needed.
Telephone: (508) 678-9000
Fax: (508) 678-9447
Main Door Assembly (Round Door)
8
Illus. No.
-1
2
3
4
5
6
7
8
9
10
11
Part No.
883249
883252
151010
150120
152014
102214
102357
151013
150683
102361
883251
883250
Qty.
1
1
1
1
6
1
1
4
6
1
1
1
American Dryer Corporation
Description
Black Main Door Assembly Complete
Large Cold Rolled Steel (CRS) Black Main Door Handle
#10-32 Black Hex Acorn Lock Nut
#10-32 Door Latch Screw
1/4-20 Free Spin Wash Nut
30” Door Glass
Large Steel Door Gasket
#10-32 Black Acorn Nut
1/4-20 x 5/8” Carriage Bolt
Black Gasket Tape
Large Black Main Door Hinge
Large 37-1/4” Black Door Ring ONLY
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly For Round Main Door
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
150443
882866
881153
2
2
2
1
4
1
1
7
8
150301
881151
2
1
9
881152
1
10
153031
1
Telephone: (508) 678-9000
9
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Single-Pole Door Switch (SDS)
1/4-20 x 3/4” Stainless Steel Cap Screw
Black Main Door Switch Housing ONLY
Black Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Black Bottom Hinge Block
(includes illus. nos. 5 and 8)
Black Top Hinge Block
(includes illus. nos. 5 and 9)
Nylon Washer
Fax: (508) 678-9447
10
Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
130103
153010
152000
154007
150005
881912
1
2
2
2
2
1
7
880251
1
8
9
10
11
12
122605
122701
121028
150301
122604
122700
122801
1
4
2
2
1
4
1
American Dryer Corporation
Description
225º F Large Automatic Thermostat ONLY
#6 Star Washer
#6-32 Hex Nut
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 7)
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 7 through 9)
4 Pin Socket Connector
Socket Terminal ONLY
Insulated Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
4 Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
(for removal of illus. nos. 8 and 12)
88 Currant Road / Fall River, MA 02720-4781
11
Lint Trap Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
Part No.
Qty.
881904
1
801767
154200
304100
150300
800500
150419
108120
150418
150425
122116
323724
1
7
1
3
2
2
1
1
2
1
1
Telephone: (508) 678-9000
Description
Lint Coupe Assembly Complete
(includes illus. nos. 1 and 3 through 5)
Lint Coupe ONLY
5/32” Pop Rivet
Lint Screen Hold Down
#10-16 x 1/2” Hex Washer TEK Screw
Lint Screen
#6 x 1/2” Tamperproof TEK Screw
Chain for Drop Lint Door
Tamperproof Screw Hand Driver
#12-24 x 3/8” Phillips Round Head Screw
Lint Drawer Switch ONLY
Lint Drawer Switch Bracket
Fax: (508) 678-9447
12
Drop Lint Door Assembly
Illus. No.
1
2
3
Part No.
883248
883247
117604
170226
160001
160103
Qty.
1
1
5
1
1
1
American Dryer Corporation
Description
Drop Lint Door (for OPL models)
Drop Lint Door (for coin models)
1/8” x 3/8” Neoprene Sponge Tape
Slide Latch (for OPL models)
Lint Door AD-100 Lock (for coin models)
Key ONLY for AD-100 Lock
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Support Assembly
Illus. No.
Qty.
1
801751
801773
1
1
2
3
4
5
801774
150500
100912
116006
170730
153011
153026
152011
301701
314701
150413
1
1
8
1
1
8
8
8
*
4
32
6
7
8
9
10
11
*
Part No.
13
Description
Basket (tumbler) ONLY without Felt Collar
Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 11)
Basket (tumbler) Support ONLY
5/16-18 x 3/4” Socket Button Head Screw
1/2-13 x 25-3/8” Tie Rod
Felt Collar
Felt Collar Adhesive (10.3 oz.)
1/2” Flat Washer
1/2” Lock Washer
1/2-13 Hex Nut
Basket (tumbler) Shims
Basket (tumbler) Ribs
#10-16 x 1/2” TORX Crimptite Screws
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
100185
101140
100178
154301
100705
883473
1
1
1
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152005
150623
2
2
2
1
1
1
American Dryer Corporation
Description
5L-780 V-Belt
14” x 3” Compound Pulley
4L-570 V-Belt (idler to motor)
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
3/8”-16 Hex Nut
3/8”-16 x 5” Hex Head Machine Bolt
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
100244
153025
152050
801775
1
4
4
1
801761
100245
150633
153011
153011
153026
152011
154322
152004
150621
153002
153001
150621
314746
824807
150413
101219
882111
101220
100719
100185
152004
150610
102102
401010
1
1
2
2
2
2
2
2
2
2
4
6
4
1
1
2
1
1
1
1
1
2
2
1
1
Telephone: (508) 678-9000
15
Description
1-15/16” Flange Bearing
Lock Washer
Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 13)
Pillow Block Bearing Housing ONLY
1-15/16” Pillow Block Bearing
1/2-13 x 2-1/4” Hex Head Bolt
9/16” Flat Washer
9/16” Flat Washer
1/2” Lock Washer
1/2-13 Hex Nut
3/8-24 x 7/16 Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 3/4” Hex Bolt
Rotational Sensor Bracket (option)
Rotational Sensor Assembly (option)
#10-16 x 1/2” Phillips Hex Head TEK Crimptite
18” Pulley
18” Pulley with Rotational Sensor Magnet (option)
1-15/16” Taper Lock Bushing
1/2” x 1/2” x 1-3/8” Key
5L-780 V-Belt
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
Rotational Sensor Magnet (option)
Adhesive for Magnet
Fax: (508) 678-9447
16
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
*
Part No.
137015
151000
150300
150008
120716
306304
132083
881763
136008
136049
136057
150301
150297
152004
121010
153002
132445
121300
Qty.
1
2
2
2
1
1
1
1
*
1
2
*
1
1
1
1
1
3
Description
RC Network
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Round Head Machine Screw
2-Position Terminal Block
Electric Relay Panel Mounting Plate ONLY
Step Down Transformer (for 120/240 volt 1Ø Only)
Termination Kit
Fuse Holder ONLY
3/4-Amp (slo blo) Fuse (for 120 volt models Only)
1/2-Amp (slo blo) Fuse (for 208/240 volt Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Green Hex Washer TEK Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor - 24 VAC
Open/Closed Bushing
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
3-Phase (3ø) Motor, Non-Reversing Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
150300
132083
881763
150301
136008
136057
150297
121010
153002
152004
137015
132447
322812
150008
120701
151000
121300
Qty.
2
1
2
2
2
1
1
1
1
1
1
1
2
1
2
3
Telephone: (508) 678-9000
17
Description
#10-16 x 1/2” Hex Washer TEK Screw
Step Down Transformer (for 208/240 volts Only)
Termination Kit
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Holder ONLY
1/2-Amp (slo blo) Fuse
#10 x 1/2” Green Hex Washer TEK Screw
L-70 Ground Lug
5/16” Lock Washer
5/16-18 Hex Nut
RC Network
3-Pole Contactor - 24 VAC
Electric Relay Panel Mounting Plate ONLY
#6-32 x 1-1/4” Phillips Round Head Machine Screw
4-Position Terminal Block
#6-32 Pal Nut
Open/Closed Bushing
Fax: (508) 678-9447
18
3-Phase (3ø) Motor, Reversing Electric Relay Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
3-Phase (3ø) Motor, Reversing Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
150300
132083
2
1
3
4
5
881763
137060
137013
132448
1
1
4
1
6
7
150301
136008
2
2
8
136057
2
9
10
11
12
13
14
15
16
17
18
19
150297
121010
153002
152004
132447
150008
120701
322812
15100
121300
135501
1
1
1
1
1
2
1
1
2
3
1
20
120768
2
21
150300
2
Telephone: (508) 678-9000
19
Description
#10-16 x 1/2” Hex Washer TEK Screw
Step Down Transformer
(for 208/230 volts Only)
Termination Kit
Arc Suppressor (A.S.) Board
Nylon Standoff
Reversing Contactor
(208/230/240/380/460 volt) 24 VAC
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Holder ONLY
(for 208-230/240 volt models Only)
1/2-Amp (slo blo) Fuse
(for 208-230/240 volt models Only)
#10 x 1/2” Green Hex Washer TEK Screw
L-70 Ground Lug
5/16” Lock Washer
5/16-18 Hex Nut
3-Pole Contactor - 24 VAC
#6-32 x 1/4” Phillips Round Head Machine Screw
4-Position Terminal Block
Electric Relay Panel Mounting Plate ONLY
#6-32 Pal Nut
Open/Closed Bushing
1-Amp Double-Pole Circuit Breaker
(for 460/480 volt models Only)
Din Mounting Rail (sold by the inch)
(for 460/480 volt models Only)
#10-16 x 1/2” Hex Washer TEK Screw
(for 460/480 volt models Only)
Fax: (508) 678-9447
20
American Dryer Corporation
Non-Reversing T.E.F.C. Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Non-Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
100178
100701
101133
101130
150501
153002
153001
100073*
1
1
1
1
4
4
4
1
181050
122701
122801
137030
814764
152004
153002
153001
117600
154000
800919
803992*
1
8
1
1
1
4
4
4
4
4
1
1
801824
803955*
1
1
153051
882670
100714
153050
152006
120200
814772
100075
1
1
1
2
2
1
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22*
*
21
Description
4L-570 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1 HP 120/208/230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug (56Z frame)
1 HP 200/240v 1Ø 50 Hz Motor
Socket Terminal
Pin/Socket Extraction Tool
8-Pin Housing Connector
120 Volt - 1Ø Motor Harness
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
1 HP 120/230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
Mount Assembly with Plug Complete
(includes illus. nos. 2 through 7 and 13 through 20)
1 HP 200/240v 1Ø 50 Hz Motor Mount Assembly with Plug Complete
1 HP 230/380/460v 3Ø 60 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
3/4” S.A.E. Flat Washer
16” Fan with 3/4” Bore
3/16” x 3/16” x 1-7/8” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8” x 90º Connector
3-Phase Motor Harness
1 HP 208/230/240/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
American Dryer Corporation
Reversing T.E.F.C. Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
23
Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
1
2
3
Part No.
Qty.
5*
100112
100701
101133
101130
120200
814780
181003
1
1
1
1
1
1
1
6
7
8
9*
150501
153002
153001
100075
4
4
4
1
10
120200
814779
150501
153002
153001
154000
152004
153002
153001
800912
804029*
1
1
4
4
4
8
7
4
4
1
1
804030*
1
117600
153050
100702
882670
153050
152006
4
1
1
1
**
2
4
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Description
4L-630 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
3/8” x 90º Connector
3-Phase Drive Motor Harness
1/2 HP 208/230/380/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) (56Z frame)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1 HP 220/230/380/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor with 3/4” Shaft (56Z frame)
3/8” x 90º Connector
3-Phase Blower (fan/impellor) Motor Harness
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16” Tinnerman Nut
5/16” Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete (for 60 Hz models Only)
(includes illus. nos. 2 through 14 and 18 through 24)
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete (for 50 Hz models Only)
(includes illus. nos. 2 through 14 and 18 through 24)
Noise Suppressor Tape (sold by the foot)
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
16” Fan with 3/4” Bore
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
* Specify voltage when ordering.
** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
24
Hot Surface Ignition (HSI) Burner Assembly
CE Export
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
25
Hot Surface Ignition (HSI) Burner Assembly
CE Export
Illus. No.
Part No.
Qty.
1
801788*
1
883340*
1
15
16
17
18
19
20
21
22
801768
801771
881655**
353260
150413
810029
128975
141105
150103
153000
151001
140828
140810
141232
318700
150300
128933
883255
881367
142809
323737
319704
151000
150001
130401
---------
1
1
1
1
5
1
1
3
3
3
3
3
3
1
2
2
1
1
1
1
1
1
2
2
1
1
23
24
25
26
27
28
29
30
31
143000
150413
150413
151001
150413
128921
150301
881597
150413
1
2
2
2
3
1
1
1
1
2
3
4
5
6
7
8
9
10**
11
12
13
14
Description
Natural Gas Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 29)
For Models Mfd. with Natural Gas ONLY
Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 29)
For Models Mfd. with Liquid Propane (L.P.) Gas ONLY
Burner Box ONLY (for natural gas models only)
Burner Box ONLY (for liquid propane models only)
Burner Liquid Propane (L.P.) Conversion Kit
Burner Box Front ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hot Surface Ignition (HSI) Module Mounting Bracket
Hot Surface Ignition (HSI) Module II
Large Burner Tube
#8-32 x 1/2” Phillips Round Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
#20 Burner Orifice (natural gas) ONLY
#42 Burner Orifice (liquid propane [L.P.] gas) ONLY
3-Port Manifold
Pipe Bracket
#10-16 x 1/2” Hex Washer TEK Screw
1/2” 24 VAC CE Redundant (natural gas) Gas Valve
1/2” 24 VAC CE (liquid propane [L.P.] gas) Gas Valve Assembly
1/2” Union Shut Off with Tail Piece
1/2” x 29-1/8” Nipple
Pipe Bracket
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º F Hi-Limit ONLY
Sail Switch
(refer to Sail Switch Assembly on page 28)
3/4” to 1/2” Reducing Coupling
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#8-32 Pal Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hot Surface Ignition (HSI) Flame Sensor
#8-18 x 7/16” Phillips Pan Head TEK Screw
Hot Surface Ignitor (2-1/2” length) - 24 VAC
#10-16 x 1/2” Hex Head TEK Crimptite Screw
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 11, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
27
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 11, 2000
Illus. No.
1
2*
Qty.
8
9
10
11
12
13
14
15
16
17
18
19
20
141105
140856
140810
141232
318700
150108
151001
128927
880960
809309
150300
142707
142506
142600
142804
128935
152013
150301
801708
143000
154004
802799
3
3
3
1
3
3
3
1
1
1
8
1
1
1
1
1
2
2
1
1
1
1
21
22
23
24
25
26
27
28
29
30
31
32
122200
150303
105500
319202
154002
319704
150001
151000
130201
150309
314762
801704
1
2
1
1
1
1
2
2
1
11
1
1
801705
1
801703
881655
1
1*
3
4
5
6
7
33
*
Part No.
Description
Large Gas “T” Burner
#23 Burner Orifice (natural gas) ONLY
#42 Burner Orifice (liquid propane [L.P.] gas) ONLY
1/2” Manifold (3-port)
Pipe Bracket (bent)
#8-32 x 1/2” Pan Head Machine Screw
#8-32 Pal Nut
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC (liquid propane [L.P.] gas) Gas Valve Assembly
Ignitor Probe Assembly
#10 x 1/2” Hex Washer TEK Screw
1” x 1-1/2” Nipple
1/2” x 1/2” Street Elbow
1/2” Black Union
1/2” x 24” Pipe
Direct Spark Ignition (DSI) Module with Three (3) Tries
#6-32 Hex Nut
#8-18 x 7/16 Phillips Pan Head TEK Screw
Direct Spark Ignition (DSI) Module Mounting Plate Assembly
1/2” x 3/4” Reducing Coupling
Twin Speed Nut
Sail Switch Top and Switch Bracket
(Refer to Sail Switch Assembly on page 28)
Sail Switch
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Hi-Limit Mounting Bracket
#6-32 x 1/2” Phillips Round Head Machine Screw
#6-32 Pal Nut
330º Hi-Limit Manual Reset
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Liquid Propane (L.P.) Cover Plate (for liquid propane [L.P.] dryer Only)
Natural Gas Burner Assembly Complete
(includes illus. nos. 1 through 13 and 18 through 30)
Liquid Propane (L.P.) Gas Burner Assembly Complete
(includes illus. nos. 1 through 13 and 18 through 31)
Burner Box ONLY
Liquid Propane (L.P.) Conversion Kit...Not Illustrated
Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
319203
319202
319201
319200
154004
154002
150300
150303
122200
881706
1
1
1
1
1
1
4
2
1
1
10
105500
1
American Dryer Corporation
Description
Sail Switch Mounting Bracket
Sail Switch Damper (flat)
Sail Switch Box Cover
Sail Switch Box
Twin Speed Nut
1/8” Push On Fastener
#10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 10)
Sail Switch Actuator Rod
88 Currant Road / Fall River, MA 02720-4781
Back Guard Assemblies
Illus. No.
1
2
3
4
5
6
7
8
9
10
Part No.
314501
150301
322809
150301
103500
150301
150301
314738
314737
882099
Qty.
1
12
1
4
4
7
12
1
1
1
Telephone: (508) 678-9000
29
Description
Bottom Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Rear Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
#8-18 x 7/16” Phillips Pan Head TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard
Outer Top
8” to 10” Increaser
Fax: (508) 678-9447
30
Microprocessor Coin Acceptors Listing
Single Coin*
ADC Part No.
Nation
Description
883240
883239
881163
United States, Canada, and Japan
Euro and UK
United States
Hanke Programmable Coin Acceptor
Hanke Programmable Coin Acceptor
Hanke 25¢ Non-Programmable Coin Acceptor
*Consult factory for coin acceptors not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Additional Parts Available
Part No.
Description
112039
112280
112041
112534
114006
120800
120802
120902
120903
121499
121500
122804
404502
880884
“Black/White/Green Ground” Label
“Lint Compartment” Label
“CAUTION - Exhausted” Label
“Phase 5 OPL Program Location Summary” Label
“WARNING - Fire Hazards” Label
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-On Wire Nut
5-1/2” Harness Tie
8” Harness Tie
Manometer (hydro gauge) for Measuring Gas Pressure
White Brush-In-Cap Bottle Touch-Up Paint
Basket (tumbler) Bearing Puller
Telephone: (508) 678-9000
31
Fax: (508) 678-9447
ADC 450576
2 -08/11/05-0