Download ADC AD-81 User's Manual

AD-81 Parts Manual
Phase 5 24 VAC
2001-2002
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450452-4
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________
AD-81
MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s) _____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
Table of Contents
Hingeless Control Door Assembly for Models Mfd. as of July 20, 2002 ....................................... 4
Control Door Assembly for Models Mfd. prior to July 20, 2002 .................................................... 5
Phase 5 OPL Microprocessor Control Panel Assembly ............................................................... 6
Phase 5 OPL Microprocessor Control Box Assembly .................................................................. 7
Cold Rolled Steel Main Door Assembly ........................................................................................ 8
Cold Rolled Steel Door Front Panel Assembly ........................................................................... 10
Main Door Switch Assembly Cold Rolled Steel Door ................................................................. 11
Lint Drawer with Cloth Lint Screen / Lint Drawer Switch Assemblies ......................................... 12
Lint Drawer with Stainless Steel Lint Screen / Lint Drawer Switch Assemblies .......................... 13
Sensor Bracket Assembly .......................................................................................................... 14
Tumbler / Support Assembly ...................................................................................................... 15
Tumbler Bearing Assembly ........................................................................................................ 16
Reversing T.E.F.C. Motor Mount Assembly ................................................................................ 18
Burner Assembly II ..................................................................................................................... 20
Idler Bearing Assembly............................................................................................................... 22
Reversing Rear Control Box Assembly ...................................................................................... 23
Sail Switch Assembly ................................................................................................................. 24
Step Down Transformer Usage Listing ....................................................................................... 25
Air-Operated Steam Damper Assembly ..................................................................................... 26
Outer Top / Back Guard Assemblies .......................................................................................... 28
Additional Parts Available ........................................................................................................... 29
Hingeless Control Door Assembly
For Models Mfd. as of July 20, 2002
Illus. No.
Part No.
Qty.
1
883491*
1
883493
1
117604
150217
150317
154011
102603
102502
102601
881053
870011
2
2
2
2
1
1
1
1
1
2
3
4
5
6
7
8
9
Description
Control Door Assembly
(includes illus. nos. 1 and 2)
Stainless Steel Control Door Assembly
(includes illus. nos. 1 and 2)
Gasket (sold by the foot)
#10-32 x 3/4” Phillips Pan Head Machine Screw
#10-16 x 3/4” TORX PLUS® BTN Type 1 Screw
#10-32 Multi-Thread U-Nut
Control Door Rod Catch
Control Door Support Rod
Control Door Rod Retainer Clip
ADC Logo ONLY (with double adhesive tape)
Logo Double Adhesive Tape Kit ONLY
* Specify color when ordering.
4
American Dryer Corporation
450452 - 4
Control Door Assembly
For Models Mfd. prior to July 20, 2002
Illus. No.
Part No.
Qty.
1
882052
870011
881045*
1
1
1
881046
1
117604
150300
102600
102601
102502
160005
4
4
1
1
1
2
2
3
4
5
6
7
8
Description
ADC Metal Logo ONLY (with double adhesive tape)
Logo Double Adhesive Tape Kit ONLY
Control Door
(includes illus. nos. 2 and 3)
Stainless Steel Control Door
(includes illus. nos. 2 and 3)
Neoprene Sponge Tape (sold by the foot)
#10-16 x 1/2” Hex Washer TEK Screw
Control Door Rod Support Catch
Control Door Retainer Clip
Control Door Rod
Turn Latch
* Specify color when ordering.
450452 - 4
www.amdry.com
5
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
112535
881032
881033
881034
1
1
1
1
881035
1
137231
153010
150005
150309
136048
1
2
2
1
1
3
4
5
6
7
Description
OPL English Keypad Label Assembly
Microprocessor Control Panel ONLY
Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7)
Phase 5 OPL Reversing Microprocessor Control Panel Assembly with Battery Bracket Clip
(includes illus. nos. 1 through 5 and 7)
Phase 5 OPL Reversing Controller ONLY
#6 Star Washer
#6-32 x 3/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head Crimptite Screw
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller.
6
American Dryer Corporation
450452 - 4
Phase 5 OPL Microprocessor Control Box Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
Part No.
Qty.
141403
150300
120715
150002
151000
136057
150301
136008
122641
122706
1
2
1
2
2
*
*
*
1
*
Description
24 VAC Transformer
#10-16 x 1/2” Hex Washer TEK Screw
30-Position Terminal Block
#6-32 x 1” Phillips Round Head Machine Screw
#6-32 Pal Nut
1/2-Amp (Slo-Blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block / Strip ONLY
15-Pin Microprocessor Connector
Socket
* As required.
450452 - 4
www.amdry.com
7
Cold Rolled Steel Main Door Assembly
8
American Dryer Corporation
450452 - 4
Cold Rolled Steel Main Door Assembly
Illus. No.
Part No.
Qty.
1
881150
1
881207
1
102354
170730
170731
881152
1
1
1
1
881208
1
150445
150443
153031
881151
2
2
1
1
881209
1
150445
150443
150683
150682
152014
151010
151009
150120
150683
150682
152014
881210
170333
102210
102360
2
2
3
3
3
1
1
1
3
3
3
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
450452 - 4
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Stainless Steel Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Clear Glass and Gasket Adhesive (10.3 oz. cartridge)
Black Glass and Gasket Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
Stainless Steel Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 7/8” Black Cap Head Setscrew
1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
Stainless Steel Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
1/4-20 x 7/8” Black Cap Head Setscrew
1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 x 5/8” Stainless Steel Carriage Bolt (for models with stainless steel doors)
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
#10-32 Stainless Steel Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 x 5/8” Stainless Steel Carriage Bolt (for models with stainless steel doors)
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
Stainless Steel Main Handle ONLY
20-7/16” Door Glass
Glass / Door Gasket Tape
www.amdry.com
9
Cold Rolled Steel Door Front Panel Assembly
Illus. No.
Part No.
Qty.
1
881994
1
2
3
4
150313
121405
––––––
11
1
1
5
881987
1
6
154215
2
10
Description
Right Hand Front Panel Complete
(includes illus. nos. 1, 3, 5, and 6)
#10-16 x 1/2” TORX PLUS® BTN Type 1
Rubber Grommet
Lint Drawer Switch
(refer to Lint Drawer with Stainless Steel Lint Screen /
Lint Drawer Switch Assemblies on page 13)
Friction Door Latch Kit
(includes illus. nos. 5 and 6)
5/32” Pop Rivet
American Dryer Corporation
450452 - 4
Main Door Switch Assembly Cold Rolled Steel Door
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
153566
152013
153010
137005
122636
881211
150301
2
2
2
1
2
1
2
450452 - 4
Description
#6-32 x 7/8” Clinch Stud
#6-32 Hex Nut
#6 Star Washer
Single-Pole Door Switch
Flag Terminal
Main Door Switch Housing
#8-18 x 7/16” Phillips Pan Head TEK Screw
www.amdry.com
11
Lint Drawer with Cloth Lint Screen / Lint Drawer Switch Assemblies
Illus. No.
Part No.
Qty.
1
883503*
1
881464
1
7
117605
802205
122116
122605
122701
122801
800478
5
1
1
2
4
1
1
8
9
10
304135
150301
122700
122604
1
2
4
2
2
3
4
5
6
Description
Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Stainless Steel Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Gasket (sold by the foot)
Lint Screen Assembly
Lint Drawer Switch
4-Pin Socket Connector
Socket Terminal ONLY
Socket / Pin Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
* Specify color when ordering.
12
American Dryer Corporation
450452 - 4
Lint Drawer with Stainless Steel Lint Screen / Lint Drawer Switch Assemblies
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
882871
117605
122116
122605
122701
122801
800478
1
5
1
2
4
1
1
7
8
9
304135
150301
122700
122604
1
2
4
2
450452 - 4
Description
White Lint Drawer with Stainless Steel Screen
Gasket (sold by the foot)
Lint Drawer Switch
4-Pin Socket Connector
Socket Terminal ONLY
Socket / Pin Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
www.amdry.com
13
Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
122605
122701
154007
150000
802174
1
4
2
2
1
7
8
9
10
11
12
—
323626
130103
153010
152000
150301
122604
122700
122801
1
1
2
2
2
1
4
1
14
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 through 4)
4-Pin Socket Connector
Socket Terminal ONLY
1/4” Tinnerman Push-On Fastener
#6-32 x 1/4” Round Head Machine Screw
Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 9)
Temperature Sensor Bracket ONLY
225° Automatic Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
4-Pin Connector ONLY
Pin Terminal ONLY
Socket / Pin Extraction Tool
American Dryer Corporation
450452 - 4
Tumbler / Support Assembly
Illus. No.
Part No.
Qty.
1
880818
1
880827
1
154210
301308
150407
100905
153004
800615
152005
153005
153004
116000
401010
115986
40
4
1
4
4
1
4
4
4
1
1
—
2
3
4
5
6
7
8
9
10
11
—
—
450452 - 4
Description
Tumbler ONLY without Felt Collar
(includes illus. nos. 1 through 3)
Reversing Tumbler and Support Assembly Complete
(includes illus. nos. 1 through 11)
5/32” x 3/16” Pop Rivet
Tumbler Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
3/8-16 x 37” Tie Rod
3/8” Flat Washer
Reversing Tumbler Support ONLY
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Construction Mastic
Felt Tumbler Pad 1/4” x 2” Dia...Not Illustrated
www.amdry.com
15
Tumbler Bearing Assembly
16
American Dryer Corporation
450452 - 4
Tumbler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
880220
153025
152050
882545
1
4
4
1
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
882543
880779
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
824807
100735
101118
101119
100106
150610
152004
1
1
2
2
2
2
2
2
2
2
4
6
4
1
1
1
1
1
1
2
2
450452 - 4
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18)
Pillow Block Bearing Platform ONLY
1-3/8” Pillow Block Bearing
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet
Rotational Sensor Assembly
Shaft Key
18-3/4” Pulley
1-3/8” Taper Lock Bushing
5L-690 V-Belt (tumbler to idler)
5/16-18 x 1-1/2 Allen Setscrew
5/16-18 Hex Nut
www.amdry.com
17
Reversing T.E.F.C. Motor Mount Assembly
18
American Dryer Corporation
450452 - 4
Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
100109
100701
101130
101139
120200
181003*
150501
153002
153001
181043*
1
1
1
1
1
1
4
4
4
1
120200
150501
153002
153001
154000
152004
153002
153001
803566
883027*
1
4
4
4
8
7
7
7
1
1
883026*
1
117604
802027
802024
153065
152006
4
1
1
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Description
4L-630 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley (60 Hz Only)
5/8” x 2-3/4” Motor Pulley (50 Hz Only)
3/8” x 90° Connector
1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
3 hp 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor
with 3/4” Shaft (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16” Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
60 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 22)
50 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 22)
Neoprene Sponge Tape (sold by the foot)
16” Riveted High Flow Impellor (60 Hz models)
16” Riveted High Flow Impellor (50 Hz models)
1-1/2” Outside Diameter x 1/2” Washer
1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
450452 - 4
www.amdry.com
19
Burner Assembly II
20
American Dryer Corporation
450452 - 4
Burner Assembly II
Illus. No.
Part No.
Qty.
1
802237
881258*
1
1
881257*
1
802240
150309
128915
880330
880134
1
4
1
1
1
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
305410
150300
141105
150103
153000
151001
140856
140811
141210
323737
150309
128928
881052
323763
150309
142715
142511
142709
142601
141300
142829
151000
150001
130403
319704
824533
150309
––––––
—
2
4
4
4
4
4
4
1
1
2
1
1
1
2
1
1
2
1
1
1
2
2
1
1
1
2
1
30
31
32
—
33
34
323737
150309
142924
881016**
128935
150299
1
2
1
1
1
4
2
3
4
5
6
7
8
9
10**
11
12
13
14
Description
Burner Box ONLY
Natural Gas Burner Assembly II Complete Less Orifice
(includes illus. nos. 1 through 9 and 11 through 32)
Liquid Propane Burner Assembly II Complete Less Orifice
(includes illus. nos. 1 through 9 and 11 through 32)
Burner Shield
#10-16 x 1/2” Hex Head Crimptite Screw
Direct Spark Ignition Ignitor / Flame-Probe ONLY
High Voltage Wire and Connector ONLY
Direct Spark Ignition Ignitor / Flame-Probe Assembly Complete
with High Voltage Wire Connector
Ignitor Gap Tool...Not Illustrated
#10-16 x 1/2” Hex Washer TEK Screw
Large Burner Tube
#8-32 x 3/4” Phillips Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
#23 Burner Orifice (natural gas) ONLY
#41 Burner Orifice (liquid propane gas) ONLY
3/4” Manifold (4-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head Crimptite Screw
24 VAC Direct Spark Ignition Gas Valve (natural gas) ONLY
24 VAC Direct Spark Ignition Gas Valve (liquid propane gas) ONLY
Gas Valve Bracket
#10-16 x 1/2” Hex Head Crimptite Screw
1/2” x 2” Nipple
3/4” x 1/2” Reducing Elbow
3/4” x 2” Nipple
3/4” Union
3/4” Union Shutoff
3/4” x 20” Pipe Nipple
#6-32 Pal Nut
#6-32 x 1/2” Round Head Machine Screw
330º Automatic Hi-Limit Thermostat
Hi-Limit Mounting Bracket
Sail Switch to Hi-Limit Harness
#10-16 x 1/2” Hex Head Crimptite Screw
Sail Switch
(refer to Sail Switch Assembly on page 24)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Head Crimptite Screw
1” to 3/4” Reducing Coupling
ADG-81 Burner Liquid Propane Conversion Kit with Orifice
Direct Spark Ignition Module Johnson Controls
#10 x 1” Hex Washer Self-Drilling Screw
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
450452 - 4
www.amdry.com
21
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
100106
101140
100109
154301
100705
882576
1
1
1
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
22
Description
5L-690 V-Belt
14” x 3” Compound Pulley
4L-650 V-Belt (idler to motor)
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
American Dryer Corporation
450452 - 4
Reversing Rear Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
323743
137013
137060
132445
150103
132467
132468
152004
150103
153002
882386
150008
120701
150300
––––––
1
4
1
1
4
1
1
1
3
1
1
2
1
4
1
15
16
17
151000
151001
121012
2
4
1
450452 - 4
Description
Relay Panel ONLY
Nylon Standoff
Arc Suppressor Board
3 hp Contactor
#8-32 x 3/4” Phillips Pan Head Machine Screw
Blower Overload (for 208 volt and 230 volt models Only)
Blower Overload (for 380 volt and 600 volt models Only)
5/16-18 Hex Nut
#8-32 x 3/4” Phillips Pan Head Machine Screw
5/16” Lock Washer
Reversing Contactor – 24 VAC
#6-32 x 1-1/4” Round Head Machine Screw
4-Position Terminal Block
#10-16 x 1/2” Hex Washer TEK Screw
Step Down Transformer
(refer to Step Down Transformer Usage Listing on page 25)
#6-32 Pal Nut
#8-32 Pal Nut
Ground Lug
www.amdry.com
23
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
105500
319202
154002
802800
1
1
1
1
802801
1
150300
150303
122200
802799
150309
154004
2
2
1
1
2
1
5
6
7
8
9
10
24
Description
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
Sail Switch Box with Cover and Bracket ONLY
(includes illus. nos. 4, 8, and 9)
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
#10-16 x 1/2” Hex Washer TEK Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Cover and Bracket ONLY
#10-16 x 1/2” Hex Head Crimptite Screw
Twin Speed Nut
American Dryer Corporation
450452 - 4
Step Down Transformer Usage Listing
Step Down Transformer Usage Listing
(Reversing Relay Box)
Heat
Gas /
Steam
Voltage
Wire
Service
Transformer Part Number
380
3 or 4
132059
416
3 or 4
132062
460/480
3 or 4
132053
575
3 or 4
132050
Microprocessor Models
NOTE: Step Down Transformer used on models mfd. for 380 volts or higher.
450452 - 4
www.amdry.com
25
Air-Operated Steam Damper Assembly
26
American Dryer Corporation
450452 - 4
Air-Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165009
153002
152004
152002
153007
820321
803415
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
108
1
1
1
1
1
4
4
1
1
1
1
1
1
2
2
2
1
2
2
1
450452 - 4
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/4” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve – 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
www.amdry.com
27
Outer Top / Back Guard Assemblies
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
28
Part No.
Qty.
Description
312527
150301
323759
150301
323749
150301
314511
150301
103500
104005
112519
1
8
1
6
1
6
1
10
4
1
1
Outer Top Assembly (for gas models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard Assembly (26-7/8” x 13-15/16”)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Rear Electrical Box Cover (10-13/16” x 9-3/4”)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Lower Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
12” Damper Assembly
“Routine Maintenance Schedule” Label
American Dryer Corporation
450452 - 4
Additional Parts Available
Part No.
Description
112280
“Clean Lint Screen” Label
112534
“Phase 5 OPL Program Location Summary” Label
122804
Manometer (hydro gauge) for Measuring Gas Pressure
114001
“CAUTION – Exhaust / Lint Screen” Label
114006
“WARNING – Fire Hazards” Label
120100
3/8” Straight (BX) Connector
120300
3/8” x 45° (BX) Connector
120400
3/8” Red Jacket (BX) Insulator
120500
3/8” Jiffy Clip (BX) Retainer Clip
120600
3/8” Greenfield (BX)
120800
1/4” In-Line Connector
120802
Red Butt Connector
120902
#74B Wire Nut
120903
Crimp-On Wire Nut
121014
1/4” Insulated (female) Terminal
121499
5-1/2” Wire Tie
121500
8” Harness Tie
121503
Harness Tie Mounting Clip
404500
Almond Brush-In-Cap Bottle Touch-Up Paint
404502
White Brush-In-Cap Bottle Touch-Up Paint
404506
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
404507
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
882458
Tumbler Bearing Puller
450452 - 4
www.amdry.com
29
ADC Part No. 450452
4 - 02/01/08 - 0