Download ADC AD-30V User's Manual

AD-30V Parts Manual
24 VAC / Phase 5
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450343-4
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________
AD-30V
MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s) _____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
Table of Contents
Non-Coin Control Door Assembly for Models Mfd. as of July 1, 2002 .......................................................................................... 4
Coin Control Door Assembly for Models Mfd. as of July 1, 2002 .................................................................................................. 5
Control Door Assembly for Models Mfd. prior to July 1, 2002 ....................................................................................................... 6
Phase 5 Non-Coin Microprocessor Control Panel Assembly ........................................................................................................ 7
Phase 5 Coin Microprocessor Control Panel Assembly ................................................................................................................ 8
Coin and Non-Coin Control Box Assembly .................................................................................................................................. 10
Dual Timer “Tap Touch” Controls for Models Mfd. as of November 1, 2000 ................................................................................ 11
Dual Timer Control Panel Assembly for Models Mfd. prior to November 1, 2000 ...................................................................... 12
Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. as of January 25, 2002 ......................................... 13
Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. prior to January 25, 2002 ...................................... 14
Coin Vault Assembly ..................................................................................................................................................................... 15
Front Panel Assembly for Models Mfd. with Steel Main Door as of July 1, 2002 ....................................................................... 16
Front Panel Assembly for Models Mfd. with Steel Main Door prior to July 1, 2002 .................................................................... 17
Front Panel Assembly for Models Mfd. with Plastic Main Door ................................................................................................... 18
Main Door “Steel” Assembly ......................................................................................................................................................... 19
Plastic Main Door Assembly ......................................................................................................................................................... 20
Main Door Switch Assembly for Models Mfd. with Steel Main Door ............................................................................................ 21
Main Door Switch for Models Mfd. with Plastic Main Door .......................................................................................................... 22
Tumbler / Support Assemblies ..................................................................................................................................................... 23
Sensor Bracket Assemblies for Models Mfd. as of July 1, 2002 ................................................................................................. 24
Sensor Bracket Assemblies for Models Mfd. prior to July 1, 2002 .............................................................................................. 26
Drop Lint Door Assembly for Models Mfd. as of July 1, 2002 ..................................................................................................... 28
Lint Trap Assembly for Models Mfd. as of July 1, 2002 ............................................................................................................... 29
Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. between August 10, 2000 and July 1, 2002 ............................. 30
Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. prior to August 10, 2000 ............................................................ 31
Tumbler Bearing Assembly for Models Mfd. as of August 11, 2000 ............................................................................................ 32
Tumbler Bearing Assembly for Models Mfd. prior to August 11, 2000 ........................................................................................ 34
Idler Bearing Assembly ................................................................................................................................................................ 36
Gas Burner Assembly for Models Mfd. as of May 20, 2000 ........................................................................................................ 37
Direct Spark Ignition Burner Assembly for Models Mfd. prior to May 20, 2000 .......................................................................... 38
Sail Switch / Hi-Limit Assemblies ................................................................................................................................................. 39
Non-Reversing Motor Mount Assembly ....................................................................................................................................... 40
Reversing T.E.F.C. Motor Mount Assembly .................................................................................................................................. 42
Electric Oven Assembly ............................................................................................................................................................... 44
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ........................................................................................................... 46
3-Phase (3ø) Motor, Electric Relay Panel Assembly ................................................................................................................... 47
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly ............................................................................................ 48
Reversing Electric Relay Panel Assembly ................................................................................................................................... 49
460-480 VAC Reversing Electric Relay Panel Assembly ............................................................................................................ 50
Steam Coil / Air-Operated Steam Damper Assembly .................................................................................................................. 51
Steam Coil / Mechanical Steam Damper Assembly .................................................................................................................... 52
Outer Top / Back Guard Assemblies ............................................................................................................................................ 53
Microprocessor Coin Acceptors Listing ....................................................................................................................................... 54
Coin Meter Replacement Parts .................................................................................................................................................... 55
Electrical Oven Component Application Chart ............................................................................................................................ 56
Additional Parts Available ............................................................................................................................................................. 57
Non-Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
881053
870011
883550
1
1
1
883551
1
883552
1
117604
150317
102603
102601
102502
150321
154011
3
2
1
1
1
2
2
2
3
4
5
6
7
8
9
4
Description
ADC Logo with Tape
Double Sided Tape Kit
White Control Door Assembly
(includes illus. nos. 2 and 3)
Ivory Control Door Assembly
(includes illus. nos. 2 and 3)
Coral Blue Control Door Assembly
(includes illus. nos. 2 and 3)
Sponge Tape (sold by the foot)
#10-16 x 3/4” TORX PLUS® BTN Type 1
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
#10-32 x 1/2” Phillips Machine Screw
#10-32 Multi-Thread U-Nut
American Dryer Corporation
450343 - 4
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
160015
160104
160016
881053
883477
1
1
1
1
1
883478
1
883549
1
883476
117604
152014
150317
102603
102601
102502
1
6
4
2
1
1
1
2
3
4
5
6
7
8
9
10
11
450343 - 4
Description
High Security Lock Assembly
Key ONLY
Lock Cam ONLY
ADC Logo with Tape
White Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
Ivory Control Door with Black Trim
(includes illus. nos. 4 through 7)
Coral Blue Control Door with Black Trim
(includes illus. nos. 4 through 7)
Black Trim Strip with Lock Hole
Sponge Tape (sold by the foot)
1/4-20 Free Spin Wash Nut
#10-16 x 3/4” TORX PLUS® BTN Type 1
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
www.amdry.com
5
Control Door Assembly
For Models Mfd. prior to July 1, 2002
Illus. No.
Part No.
Qty.
1
160015
160017
160104
160052
881053
870011
882511
1
1
1
1
1
1
1
882513
1
882512
1
117603
150300
102603
150300
102502
102601
3
2
1
2
1
1
2
3
4
5
6
7
8
9
10
6
Description
High Security MK-100 Lock Assembly with Key (for coin models Only)
Special Dummy Lock ONLY (for non-coin models Only)
MK-100 Key ONLY
Lock Cam ONLY
ADC Logo with Tape
Double Sided Tape Kit
White Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Almond B Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Coral Blue Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Noise Suppressor Tape (sold by the foot)
#10-16 x 1/2” Hex Washer TEK Screw
Control Door Rod Support Catch
#10-16 x 1/2” Hex Washer TEK Screw
Control Door Support Rod
Control Door Rod Retainer Clip
American Dryer Corporation
450343 - 4
Phase 5 Non-Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112535
112276
112275
1
1
1
112277
1
112278
1
801255
801256
801206
1
1
1
801207
1
137222
137231
824998
153010
150005
150309
136048
1
1
1
2
2
1
1
2
3
4
5
6
7
Description
Non-Coin English Keypad Label Assembly
Non-Coin Stick-On Labels (English Only) … Not Illustrated
3-Language Non-Coin Stick-On Labels
(Spanish, Italian, and Hebrew) … Not Illustrated
3-Language Non-Coin Stick-On Labels
(English, Spanish, and Hebrew) … Not Illustrated
5-Language Non-Coin Stick-On Labels
(Italian, Dutch, French, German, and Chinese) … Not Illustrated
Phase 5 Microprocessor Control Panel ONLY
Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 Non-Coin Non-Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7)
Phase 5 Non-Coin Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7)
Phase 5 Non-Coin Non-Reversing Microprocessor Controller (computer) ONLY
Phase 5 Non-Coin Reversing Microprocessor Controller (computer) ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-Amp (Slo-Blo) Fuse ONLY
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
450343 - 4
www.amdry.com
7
Phase 5 Coin Microprocessor Control Panel Assembly
8
American Dryer Corporation
450343 - 4
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
2
112526
883537
1
1
883538
1
883582
1
883581
1
883539
1
883540
1
883580
1
883579
1
5
6
7
150309
137213
824998
153010
150005
––––––
1
1
1
2
2
1
8
––––––
1
9
10
137023
137021
880772
122800
136048
1
3
1
1
1
3
4
11
Description
Coin Keypad Label Assembly
Phase 5 Coin Control Panel Assembly
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Phase 5 Coin Control Panel Assembly with Battery Option
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Phase 5 Coin Control Panel Assembly with Battery Option
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Phase 5 Coin Control Panel Assembly
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Coin Control Panel ONLY
(for models mfd. as of June 25, 2002)
Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
Coin Control Panel ONLY
(for models mfd. prior to June 25, 2002)
Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 54)
Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 54)
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
450343 - 4
www.amdry.com
9
Coin and Non-Coin Control Box Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
—
Part No.
Qty.
132002
150300
150301
131931
137035
323583
150300
122641
122706
122801
1
2
2
1
1
1
2
1
*
1
Description
Transformer (for mechanical steam dampers 208 VAC and higher)
#10-16 x 1/2” Hex Washer TEK Screw
#8 x 7/16” Phillips Pan Head TEK Screw
Steam Valve Relay (for mechanical steam damper models Only) 24 VAC
Motor Capacitor (for mechanical steam damper models Only)
Capacitor Bracket (for mechanical steam damper models Only)
#10-16 x 1/2” Hex Washer TEK Screw
15-Pin Microprocessor Connector
Socket Terminal ONLY
Pin / Socket Extraction Tool
* As required.
10
American Dryer Corporation
450343 - 4
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 1, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
824298
824299
824175
122301
131932
120730
151000
882903
1
1
1
1
3
1
6
1
9
10
11
12
13
14
15
850392
153010
152000
150207
150110
112563
124104
124105
–
2
3
2
4
1
1
1
450343 - 4
Description
15 Minute Timer – 24 VAC
60 Minute Timer – 24 VAC
Red Pilot Light – 24 VAC
“Tap Touch” Switch
Relay SPST 24v
30-Position Terminal Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer
www.amdry.com
11
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
882596
1
1
1
882600
1
850456
131917
150207
154001
152000
153010
120730
150110
131932
151000
112050
124103
124025
124030
132198
882540
882573
1
1
2
2
2
2
1
4
1
4
1
2
1
1
1
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
—
—
12
Description
Red Indicator Light – 24 VAC
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete – 24 VAC
(includes illus. nos. 1 through 16)
Dual Timer Reversing Control Panel Assembly Complete – 24 VAC
(includes illus. nos. 1 through 17)
Dual Timer Control Panel ONLY
Push-To-Start Relay – 24 VAC
#10-24 x 1/2” Phillips Pan Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Relay – 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
Arrow Timer Knob
60 Minute Timer – 24 VAC
15 Minute Timer – 24 VAC
Reversing Timer – 24 VAC
Panel Wiring (non-reversing panel) … Not Illustrated
Panel Wiring (reversing panel) … Not Illustrated
American Dryer Corporation
450343 - 4
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
824172
1
1
1
824109
131932
154001
123225
125601
153010
152016
120712
150300
122602
122700
122801
1
1
2
1
1
2
2
1
1
1
7
1
4
5
6
7
8
9
10
11
12
—
Description
Red Indicator Light – 24 VAC
Rocker Heat Selector Switch
Coin Meter Control Panel Assembly Less Coin Meter
(includes illus. nos. 2 through 5, 7, and 8)
Coin Meter Control Panel ONLY
24 VAC Relay
#10-24 Speed Nut (used on P/N: 131932, 24 VAC relay)
Green Push-To-Start Button
25¢ Coin Meter – 24 VAC (specify timing)
#6 Star Washer
#4-40 Hex Nut
12-Position Terminal Block
#10-16 x 1/2” Hex Washer TEK Screw
9-Pin Connector
Pin Terminal ONLY
Pin Extraction Tool
NOTE: For Coin Meter Replacement Parts refer to page 55.
450343 - 4
www.amdry.com
13
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
824020
1
1
1
4
5
6
7*
8
9
10
11
12
—
800054
131917
150207
154001
125601
150303
120712
150309
122602
122700
122801
1
1
2
2
1
2
1
1
1
9
1
Description
Red Indicator Light – 24 VAC
Rocker Heat Selector Switch
Coin Meter Control Panel Assembly Complete – 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
Coin Meter Control Panel ONLY
Push-To-Start Relay – 24 VAC
#10-24 x 1/2” Round Head Machine Screw
#10-24 Speed Nut
25¢ Coin Meter – 24 VAC (specify timing)
#4 x 3/4” Pan Head “A” Screw
12-Position Terminal Block
#10-16 x 1/2” Hex Head TEK Crimptite Screw
9-Pin Connector ONLY
Pin Terminal ONLY
Pin / Socket Extraction Tool
* Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 55.
14
American Dryer Corporation
450343 - 4
Coin Vault Assembly
Illus. No.
Part No.
Qty.
1
802112
1
802117
802110
1
1
4
802115
160028
875061
160105*
802020
1
1
1
1
1
5
6
7
8
152014
102502
102601
102603
4
1
1
1
2
3
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 5)
Microprocessor Coin Vault ONLY
Non-Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 5)
Non-Microprocessor Coin Vault ONLY
Cam for 1/4 Turn Lock ONLY
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 4)
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Catch
* Specify key number when ordering.
450343 - 4
www.amdry.com
15
Front Panel Assembly
For Models Mfd. with Steel Main Door as of July 1, 2002
Illus. No.
Part No.
Qty.
1
883567
1
883568
1
883569
1
3
150313
150318
––––––
11
1
1
4
5
6
122002
170330
154215
1
1
2
2
16
Description
White Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
Ivory Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
Coral Blue Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
#10-16 x 1/2” TORX PLUS® BTN Type 1
25 IP TORX PLUS® Bit 1/4 Hex (for removal of TORX® head screw)
Main Door Hinge
(refer to Main Door “Steel” Assembly on page 19)
Lint Drawer Switch
Friction Door Latch
5/32” Pop Rivet
American Dryer Corporation
450343 - 4
Front Panel Assembly
For Models Mfd. with Steel Main Door prior to July 1, 2002
Illus. No.
Part No.
Qty.
1
883137
1
883138
1
883139
1
3
150313
150318
––––––
11
1
1
4
––––––
1
5
6
170330
154215
1
2
2
450343 - 4
Description
White Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
Coral Blue Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
Ivory Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
#10-16 x 1/2” TORX PLUS® BTN Type 1
25 IP TORX PLUS® Bit 1/4 Hex (for removal of TORX® head screw)
Main Door Hinge
(refer to Main Door “Steel” Assembly on page 19)
Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assemblies on page 30 and page 31)
Friction Door Latch
5/32” Pop Rivet
www.amdry.com
17
Front Panel Assembly
For Models Mfd. with Plastic Main Door
Illus. No.
Part No.
Qty.
1
882525
1
882527
1
882528
1
2
3
4
150309
121405
––––––
11
1
1
5
6
170330
154215
1
2
18
Description
White Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Almond B Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assemblies on page 30 and page 31)
Friction Door Latch
5/32” Pop Rivet
American Dryer Corporation
450343 - 4
Main Door “Steel” Assembly
Illus. No.
Part No.
Qty.
1
881150
1
2
3
102354
170731
881152
1
1
1
4
5
6
150445
153031
881151
2
1
1
7
8
9
10
11
12
13
14
15
150445
150683
152014
151010
150120
150683
152014
881210
102211
170731
2
3
3
1
1
3
3
1
1
1
450343 - 4
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Black Gasket Adhesive (10.7 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16” Door Glass
Black Glass Adhesive (10.3 oz. cartridge)
www.amdry.com
19
Plastic Main Door Assembly
Illus. No.
Part No.
Qty.
1
881422
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
150448
170319
150431
1
4
4
1
1
1
4
4
1
7
8
9
20
Description
Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with 4 Holes
Main Door Gasket / Glass Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (nylon) Spacer
Main Door Latch Screw (#10 x 7/16” dome hex head screw)
American Dryer Corporation
450343 - 4
Main Door Switch Assembly
For Models Mfd. with Steel Main Door
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
122636
881211
881153
2
2
2
1
2
1
1
7
150301
2
450343 - 4
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch
Flag Terminal
Black Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
www.amdry.com
21
Main Door Switch
For Models Mfd. with Plastic Main Door
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
152013
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
881246
150201
121405
2
1
2
1
22
Description
#6-32 Hex Nut
#6 Lock Washer
Single-Pole Door Switch
Insulated Female Terminal
3/8” Standard Nylon Spacers
12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
#6-32 x 1” Self-Clinching Stud
Main Door Switch Housing
#10-32 x 1/4” Phillips Pan Head Screw
Rubber Grommet
American Dryer Corporation
450343 - 4
Tumbler / Support Assemblies
Illus. No.
1*
Part No.
Qty.
882519
882520
882521
882522
1
1
1
1
882524
2
3
4
5
6
7
8
9
10
11
—
882523
150309
301304
322002
322003
322001
322000
322066
322067
150518
100918
153004
882517
152005
153005
153004
116002
401010
40
4
2
2
2
2
2
2
1
4
4
1
4
4
4
1
1
Description
Galvanized Tumbler ONLY (without felt collar)
Stainless Steel Tumbler ONLY (without felt collar)
Polished Stainless Steel Tumbler ONLY (without felt collar)
Galvanized Tumbler / Support Assemblies
(includes illus. nos. 1 through 10)
Stainless Steel Tumbler / Support Assemblies
(includes illus. nos. 1 through 10)
Polished Stainless Steel Tumbler / Support Assemblies ONLY (without felt collar)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Galvanized Tumbler Rib ONLY
Galvanized Taper Tumbler Rib
Galvanized Straight Tumbler Rib
Stainless Steel Straight Tumbler Rib
Stainless Steel Tapered Tumbler Rib
Polished Stainless Steel Tumbler Rib
Polished Stainless Steel Tapered Tumbler Rib
5/16-18 x 3/8” Socket Button Head Screw
3/8-16 x 26-3/4” Tie Rod
5/16” Flat Washer
Tumbler Support ONLY
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar (5.0 oz. tube)
* Felt collar is not included and must be ordered separately.
450343 - 4
www.amdry.com
23
Sensor Bracket Assemblies
For Models Mfd. as of July 1, 2002
24
American Dryer Corporation
450343 - 4
Sensor Bracket Assemblies
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
882533
1
2
3
4
5
6
7
8
9
10
130301
153010
152000
121028
122701
122605
154007
150005
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
305007
122604
122700
150301
150005
130111
130100
130301
130101
153010
152000
882535
121028
122701
122605
818007
1
1
4
2
5
1
1
1
1
5
5
1
4
4
1
1
25
818321
1
305007
122604
122700
122801
150301
1
1
4
1
2
26
27
28
450343 - 4
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push-On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Thermostat
150° Thermostat
225° Manual Reset Thermostat
180° Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor Bracket Harness Assembly
(includes illus. nos. 22 through 24)
Noncomputer Sensor Bracket Assembly Complete – Includes Thermostats
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin / Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
www.amdry.com
25
Sensor Bracket Assemblies
For Models Mfd. prior to July 1, 2002
26
American Dryer Corporation
450343 - 4
Sensor Bracket Assemblies
For Models Mfd. prior to July 1, 2002
Illus. No.
Part No.
Qty.
1
882533
1
2
3
4
5
6
7
8
9
10
130301
153010
152000
121028
122701
122605
154007
150005
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
322062
122604
122700
150301
150005
130111
130100
130301
130101
153010
152000
882535
121028
122701
122605
882534
1
1
4
2
5
1
1
1
1
5
5
1
4
4
1
1
25
322062
882536
1
1
26
27
122604
122700
122801
150301
1
4
1
2
28
450343 - 4
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push-On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Thermostat
150° Thermostat
225° Manual Reset Thermostat
180° Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor Bracket Harness Assembly
(includes illus. nos. 22 through 24)
Universal Sensor Bracket ONLY
Noncomputer Sensor Bracket Assembly Complete – Includes Thermostats
(includes illus. nos. 14 through 25)
4-Pin Connector ONLY
Pin Terminal ONLY
Pin / Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
www.amdry.com
27
Drop Lint Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
802277
1
802265
1
117604
170226
160001
160103
5
1
1
1
2
3
4
28
Description
Drop Lint Door (for non-coin models)
(includes illus. nos. 1 through 3)
Drop Lint Door (for coin models)
(includes illus. nos. 1, 2, and 4)
Sponge Tape (sold by the foot)
Slide Latch (for non-coin models)
Lint Door AD-100 Lock (for coin models)
Key ONLY
American Dryer Corporation
450343 - 4
Lint Trap Assembly
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
801070
1
800401
1
801069
800443
154200
150300
304100
800500
1
1
6
3
1
2
2
3
4
5
450343 - 4
Description
Lint Trap Assembly Complete for 60 Hz Models ONLY
(includes illus. nos. 1 and 3 through 5)
Lint Trap Assembly Complete for 50 Hz Models ONLY
(includes illus. nos. 1 and 3 through 5)
Lint Trap ONLY (60 Hz)
Lint Trap ONLY (50 Hz)
5/32” Pop Rivet
#10-16 x 1/2” Hex Washer TEK Screw
Lint Screen Holder ONLY
Lint Screen Assembly
www.amdry.com
29
Lint Drawer / Lint Drawer Switch Assemblies
For Models Mfd. between August 10, 2000 and July 1, 2002
Illus. No.
Part No.
Qty.
1
883155
1
883156
1
883157
1
6
117605
122116
122605
122701
122801
818087
5
1
2
4
1
1
7
8
9
304136
150301
122700
122604
1
2
4
2
2
3
4
5
30
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Gasket (sold by the foot)
Lint Drawer Switch
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin / Socket Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 3 through 6)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
American Dryer Corporation
450343 - 4
Lint Drawer / Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000
Illus. No.
Part No.
Qty.
1
882514
1
882515
1
882516
1
7
117605
108224
122116
122605
122701
122801
800478
5
1
1
2
4
1
1
8
9
10
304136
150301
122700
122604
1
2
4
2
2
3
4
5
6
450343 - 4
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Almond B Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Neoprene Sponge Tape (sold by the foot)
Lint Screen Assembly
Lint Drawer Switch
4-Pin Socket Connector
Socket Terminal ONLY
Pin / Socket Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
www.amdry.com
31
Tumbler Bearing Assembly
American Dryer Corporation
For Models Mfd. as of August 11, 2000
32
450343 - 4
Tumbler Bearing Assembly
For Models Mfd. as of August 11, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
880220
153025
152050
882544
1
4
4
1
882545
1
882542
882543
880202
880779
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
824807
100724
101100
101118
101110
100100
100108
150610
152004
1
1
1
1
2
2
2
2
2
2
2
2
4
6
4
1
1
1
1
1
1
1
1
2
2
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
450343 - 4
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 16, 23, and 24)
Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18, 23, and 24)
Pillow Block Bearing Platform ONLY
Pillow Block Bearing Platform for Models with Rotational Sensor
1-3/8” Pillow Block Bearing
1-3/8” Pillow Block Bearing for Reversing Models ONLY
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet for Reversing Models ONLY
Rotational Sensor Assembly
Shaft Key
18” Pulley for Non-Reversing Models ONLY
18-3/4” Pulley for Reversing Models ONLY
1” Taper Lock Bushing for Reversing Models ONLY
5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY
5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY
5/16-18 x 1-1/2 Allen Setscrew
5/16-18 Hex Nut
www.amdry.com
33
Tumbler Bearing Assembly
For Models Mfd. prior to August 11, 2000
34
American Dryer Corporation
450343 - 4
Tumbler Bearing Assembly
For Models Mfd. prior to August 11, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
Qty.
880220
153025
152050
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
*
2
2
4
4
4
2
2
1
801103
1
801105
801104
880779
880202
152004
150610
101100
101118
101110
100735
154301
100713
100100
100108
824807
1
1
1
1
2
2
1
1
1
1
2
1
1
1
1
Description
1-3/4” Flange Bearing with Nylock Setscrew
9/16” Lock Washer
9/16-16” Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16” Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete for Models Mfd. without Rotational Sensor
(includes illus. nos. 4 through 20)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8” Pillow Block Bearing Assembly with Magnet for Models Mfd. with Rotational Sensor
1-3/8” Pillow Block Bearing with Nylock Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
18” Pulley for Non-Reversing Models ONLY
18-3/4” Pulley for Reversing Models ONLY
1” Taper Lock Hub (key not included) for Reversing Models ONLY
Shaft Key (for taper lock hub)
5/16-18 x 1” Allen Setscrew
1/4” x 1/4” x 7/8” Key
5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY
5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY
Rotational Sensor Assembly
* As required.
450343 - 4
www.amdry.com
35
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
4
5
6
100100
100108
101129
100105
100112
154301
100705
882576
1
1
1
1
1
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
2
3
36
Description
5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY
5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY
9” x 2-1/2” Compound Pulley
4L-520 V-Belt (idler to motor) for Non-Reversing Models ONLY
4L-610 V-Belt (idler to motor) for Reversing Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolts
American Dryer Corporation
450343 - 4
Gas Burner Assembly
For Models Mfd. as of May 20, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
141104
151001
150108
140820*
140806*
141230
318714
150309
128927
140411
809307
801048
810030
150300
152013
142707
142500
142800
142600
142818
817060**
2
2
2
2
2
1
1
5
1
1
1
1
1
9
2
1
1
1
1
1
1
817061**
1
850858
882269
880603***
1
1
1
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Description
Small Tube Burner
#8-32 Pal Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
#29 Burner Orifice (natural gas)
#46 Burner Orifice (liquid propane gas)
1/2” Direct Spark Ignition Manifold (2-port)
1-Piece Gas Valve Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Gas Valve
Liquid Propane Conversion Kit for Gas Valve
Ignitor-Probe Assembly
ADC Direct Spark Ignition Johnson Module (3 tries)
Johnson Direct Spark Ignition Module Mounting Bracket
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 Hex Nut
1/2” x 1-1/2” Long Black Nipple
1/2” 90° Elbow
1/2” x 18” Pipe
1/2” Black Union
1/2” x 9-1/2” B.I. Nipple
Direct Spark Ignition Burner Box (natural gas)
(includes illus. nos. 1 through 3 and 5 through 18)
Direct Spark Ignition Burner Box (liquid propane gas)
(includes illus. nos. 1 through 3 and 5 through 18)
Direct Spark Ignition Burner Box ONLY
AD-30V Liquid Propane Conversion Kit (includes orifices)
Steam to Gas Interface Assembly
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
*** Needed when converting steam heat to gas heat.
450343 - 4
www.amdry.com
37
Direct Spark Ignition Burner Assembly
For Models Mfd. prior to May 20, 2000
Illus. No.
1
2
3
4*
5
6
7
8
9
10
11
12
13
14
15
16
17
18
—
—
Part No.
Qty.
141105
151001
150108
140820
140806
141230
318700
150300
128927
140411
880960
880134
882537
128935
817027
150309
152013
141313
142809
318712
150309
850858
882269*
882603**
2
2
2
2
2
1
2
2
1
1
1
1
1
3
2
1
1
1
4
1
1
1
Description
Large Tube Burner
#8-32 Pal Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
#29 Burner Orifice (natural gas)
#46 Burner Orifice (liquid propane gas)
1/2” Direct Spark Ignition Manifold (2-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Washer TEK Screw
Gas Valve
Liquid Propane Valve Conversion Kit
Direct Spark Ignition Gas Valve (liquid propane kit combination)
Ignitor Probe Assembly
Flame-Probe Wire ONLY
Direct Spark Ignition Module (3 tries)
Direct Spark Ignition / Hot Surface Ignition Module Mounting Bracket Assembly
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 Hex Nut
90° x 1/2” x 1” Gas Shutoff Assembly
1/2” x 29-1/8” Pipe
Gas Valve Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Direct Spark Ignition Burner Box ONLY
AD-30V Liquid Propane Conversion Kit
Steam to Gas Transition Plate
* Consult factory for elevations over 2,000 feet.
** Not illustrated … needed to convert dryer from steam to gas.
38
American Dryer Corporation
450343 - 4
Sail Switch / Hi-Limit Assemblies
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150300
802799
150303
122200
105500
319202
154002
802800
802801
1
2
1
2
1
1
1
1
1
1
10
11
12
13
14
15
142809
150300
319704
151000
150001
130201
1
2
1
2
2
1
450343 - 4
Description
Twin Speed Nut
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box Cover and Bracket
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
Sail Switch Box with Cover and Bracket
Sail Switch Assembly Complete
(includes illus. nos. 1 through 9)
1/2” x 29-1/8” Pipe
#10-16 x 1/2” Hex Washer TEK Screw
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Hi-Limit Manual Reset Thermostat
www.amdry.com
39
American Dryer Corporation
Non-Reversing Motor Mount Assembly
40
450343 - 4
Non-Reversing Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
100105
100701
101104
101132
101131
101133
150501
153002
153001
100065
181049
1
1
1
1
1
1
4
4
4
1
1
100066
1
122701
122801
137030
152004
153002
153001
117600
154000
850017
803938*
8
1
1
4
4
4
4
4
1
1
817076
1
803809*
1
803810*
1
153050
100604
100702
153050
152006
120200
100007
2
1
1
2
2
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Description
4L-520 V-Belt (to idler motor)
3/16” x 3/16” x 1” Key (for use on 3ø – 60 Hz models Only)
1/2” x 2” Motor Pulley (for use on 1ø – 60 Hz models Only)
5/8” x 2” Motor Pulley (for use on 3ø – 60 Hz models Only)
1/2” x 2-1/4” Motor Pulley (for use on 181049 motors Only)
5/8” x 2-1/4” Motor Pulley (for use on 100066 motors Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 hp 120-230v 1ø 60 Hz 100v 50 Hz Totally Enclosed, Fan-Cooled Motor with Plug
1/2 hp 240v 1ø 50 Hz Motor with Plug
(for models mfd. as of August 22, 2002)
1/2 hp 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled Motor with Plug
(for models mfd. prior to August 22, 2002)
Socket Terminal ONLY
Pin / Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
1/2 hp 120-230v 1ø 50/60 Hz
Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
1/2 hp 240v 1ø 50 Hz Non-Reversing
Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
1/2 hp 208/230/380/460v 3ø 60 Hz
Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1/2 hp 208/230/380/460v 3ø 50 Hz Non-Reversing
Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1/2” S.A.E. Flat Washer
12-1/2” Impellor with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8” 90° Connector
1/2 hp 208-460 50/60 Hz Motor
* Specify voltage when ordering.
450343 - 4
www.amdry.com
41
Reversing T.E.F.C. Motor Mount Assembly
42
American Dryer Corporation
450343 - 4
Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
100112
100701
101132
101133
120200
181003
150501
153002
153001
100007
120200
150501
153002
153001
154000
152004
153002
153001
850070
1
1
1
1
1
1
4
4
4
1
1
4
4
4
8
4
4
4
1
803802*
1
803803*
1
117604
153050
100702
100604
153050
152006
4
2
1
1
2
2
4
5*
6
7
8
9*
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Description
4L-610 V-Belt (to idler motor)
3/16” x 3/16” x 1” Key
5/8” x 2” Motor Pulley (for 60 Hz models Only)
5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only)
3/8” x 90° Connector
1/2 hp 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
(includes illus. nos. 18 and 19)
Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
For 60 Hz Models ONLY
(includes illus. nos. 2 through 14 and 18 through 24)
Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
For 50 Hz Models ONLY
(includes illus. nos. 2 through 14 and 18 through 24)
Neoprene Sponge Tape (sold by the foot)
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
12-1/2” Impellor with 1/2” Bore
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
* Specify voltage when ordering.
450343 - 4
www.amdry.com
43
Electric Oven Assembly
44
American Dryer Corporation
450343 - 4
Electric Oven Assembly
Illus. No.
1*
2*
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
—
Part No.
Qty.
803007
––––––
––––––
150300
802800
802801
1
1
–
2
1
1
154004
150300
802799
122200
150303
105500
319202
154002
150300
803100
320611
150301
130400
150300
154001
121010
152014
––––––*
––––––*
120081
120080
152008
121011
––––––*
153009
321301
150402
882603**
1
2
1
1
2
1
1
1
2
1
1
3
1
2
1
1
3
1
1
–
–
–
–
–
–
1
1
1
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
290° Hi-Limit Thermostat
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Oven Wire with Crimp Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 5/8” Truss Head Machine Screw
Steam to Electric Transition Plate
* Refer to Electrical Oven Component Application Chart on page 56.
** Not illustrated … needed to convert dryer from steam to electric.
450343 - 4
www.amdry.com
45
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
151000
150300
150008
120716
322817
882662
2
2
2
1
1
1
882663
1
818395
1
882652
882653
818396
136008
136049
136057
150301
150297
152004
121010
153002
132459
121300
1
1
1
1 or 2
1
2
1
1
1
1
1
1
3
6
7
8
9
10
11
12
13
14
15
46
Description
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
2-Position Terminal Block
Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 120 Volt
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 208-240 Volt
for Gas and Steam Heated Models ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 208-240 Volt for Electric Heated Models ONLY
(includes illus. nos. 1 through 14)
Transformer Assembly – 120 Volt
Transformer Assembly – 208-240 Volt for Gas and Steam Heated Models ONLY
Transformer Assembly – 208-240 Volt for Electric Heated Models ONLY
Fuse Holder ONLY
3/4-Amp (Slo-Blo) Fuse ONLY – 120 Volt
1/2-Amp (Slo-Blo) Fuse ONLY – 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open / Closed Bushing
American Dryer Corporation
450343 - 4
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
151000
150300
150008
120701
120716
322817
882664
2
2
2
1
1
1
1
818400
1
882665
1
818395
1
882667
1
882653
818396
882654
136008
136057
150301
150297
152004
121010
153002
132459
121300
1
1
1
2
2
2
1
1
1
1
1
3
5
6
7
8
9
10
11
12
13
14
15
450343 - 4
Description
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block (for models mfd. with 3ø motors)
2-Position Terminal Block (for models mfd. with 1ø motors)
Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 208-240 Volt for Gas and Steam Models ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly – 208-240 Volt for Electric Heated Models ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 380-416 Volt for Gas and Steam Models ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 208-240 Volt for Electric Heated Models ONLY
For Models Mfd. with Single-Phase (1ø) Motor ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete – 380-416 Volt for Electric Heated Models ONLY
For Models Mfd. with Single-Phase (1ø) Motor ONLY
(includes illus. nos. 1 through 14)
Transformer Assembly – 208-240 Volt for Gas and Steam Models ONLY
Transformer Assembly – 208-240 Volt for Electric Heated Models ONLY
Transformer Assembly – 380-416 Volt
Fuse Holder ONLY
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open / Closed Bushing
www.amdry.com
47
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
150009
120701
830208
824161
135501
120768
150301
150297
152004
121010
153002
132459
322817
883332
2
1
1
1
1
2
4
2
1
1
1
1
1
1
830262
1
151000
120765
121300
141403
2
4
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
48
Description
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
Transformer Assembly (460 VAC) for Micro Models ONLY
Transformer Assembly (460 VAC) for Non-Micro Models ONLY
1-Amp Double-Pole Circuit Breaker (460 VAC Only)
35 x 15mm Din Rail
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
24 VAC 3-Pole Contactor
Mounting Plate ONLY
Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY
(includes illus. nos. 1 through 14)
Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY
(includes illus. nos. 1 through 14)
#6-32 Pal Nut
End Stop
Open / Closed Bushing
Control Voltage Transformer (24V) for Micro Models ONLY
American Dryer Corporation
450343 - 4
Reversing Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
150300
150008
120701
132458
882653
825428
882654
136008
136057
150301
150297
152004
121010
153002
132459
322812
882673
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
883335
1
882676
1
151000
120765
2
1
6
7
8
9
10
11
12
13
14
15
16
450343 - 4
Description
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
3-Pole Reversing Contactor
Transformer Assembly – 208-240 Volt for Gas and Steam Models ONLY
Transformer Assembly – 208-240 Volt for Electric Heated Models ONLY
Transformer Assembly – 380-416 Volt
Fuse Holder ONLY
1/2-Amp (Slo-Blo) Fuse ONLY – 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Mounting Plate ONLY
Rear Electric Panel Assembly Complete – 208-240 Volt for Gas and Steam Models ONLY
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete – 208-240 Volt for Electric Heated Models ONLY
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete – 380-416 Volt
(includes illus. nos. 1 through 16)
#6-32 Pal Nut
Standard End Bracket
www.amdry.com
49
460-480 VAC Reversing Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
132458
150297
121010
152004
153002
132459
150300
830208
824161
120765
322817
883327
1
1
1
1
1
1
4
1
1
2
1
1
––––––*
1
151000
150009
120701
135501
120768
112068
121300
141403
2
2
1
1
2
1
1
1
9
10
11
12
13
14
15
16
17
18
Description
24 VAC Reversing Contactor
#10 x 1/2” Hex Washer TEK Screw (green)
L-70 Ground Lug
5/16-18 Hex Nut
5/16” Lock Washer
24 VAC 3-Pole Blower Contactor
#10-16 x 1/2” Hex Washer TEK Screw
Transformer Assembly (460 VAC) for Micro Models ONLY
Transformer Assembly (460 VAC) for Non-Micro Models ONLY
End Stop
Mounting Plate ONLY
460 VAC Reversing Rear Electric Panel Assembly Complete for Micro Models ONLY
(includes illus. nos. 1 through 16)
460 VAC Reversing Rear Electric Panel Assembly Complete for Non-Micro Models ONLY
(includes illus. nos. 1 through 16)
#6-32 Pal Nut
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
1-Amp Double-Pole Circuit Breaker
35 x 15mm Din Rail (sold by the inch)
3-Phase (3ø) Power Input Label
Open / Closed Bushing
Control Voltage Transformer (24V) for Micro Models ONLY
* Not available at time of printing. Contact factory for additional information.
50
American Dryer Corporation
450343 - 4
Steam Coil / Air-Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165008
153002
152004
152002
153007
820321
803416
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151006
152051
100495
323365
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
60
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
1
2
2
1
450343 - 4
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
5/16-24 Stainless Steel Acorn Nut
5/16-24 Right Hand Jam Nut
11/16” Dia. x 3” Stroke Piston
Left and Right Piston Support
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve – 24 VAC
#6-32 x 1” Slotted Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
www.amdry.com
51
Steam Coil / Mechanical Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165008
153002
152004
152002
153007
820321
880780
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
115995
102350
309300
154300
153022
104052
150110
153012
312315
153022
154300
850268
150110
153012
312315
104054
100511
122120
150026
122120
150026
153012
150102
––––––*
60
1
1
1
1
1
2
2
1
1
1
1
2
2
1
1
1
1
2
1
2
2
2
1
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7 through 10)
Steam Damper Gasket (sold by the inch)
68-1/2” Long Steam Damper Foam
Rod Bracket
1/2” x 3/32” Cotter Pin
#10 Steel Burr
Mechanical Steam Damper Actuator Rod
#8-32 x 1/4” Phillips Head Machine Screw
#8 Star Washer
Mechanical Steam Damper Motor Mount
#10 Steel Burr
1/2” x 3/32” Cotter Pin
Mechanical Steam Damper Arm
#8-32 x 1/4” Phillips Head Machine Screw
#8 Star Washer
Mechanical Steam Damper Motor Mount
Mechanical Steam Damper Motor
Mechanical Steam Damper Switch Plate
Mechanical Steam Damper Switch
#4-40 x 5/8” Phillips Pan Head Machine Screw
Mechanical Steam Damper Switch
#4-40 x 5/8” Phillips Pan Head Machine Screw
#8 Star Washer
#8-32 x 3/8” Pan Head Machine Screw
Mechanical Steam Damper Motor Cam
* The mechanical steam damper motor cam is part of the mechanical steam damper motor.
52
American Dryer Corporation
450343 - 4
Outer Top / Back Guard Assemblies
Illus. No.
1
2
3*
4
5
6*
7
8
9
10
Part No.
Qty.
Description
322809
150301
314424
314422
150301
150300
322015
322082
322018
150301
103500
882099
1
4
1
1
7
10
1
1
1
13
4
1
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Gas Top Back Guard
Electric Top Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Outer Top
Bottom Back Guard (for models mfd. as of March 19, 2001)
Bottom Back Guard (for models mfd. prior to March 19, 2001)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
8” to 10” Transition Piece
(for models mfd. prior to March 19, 2001)
* There is no outer top or top back guard on steam models.
450343 - 4
www.amdry.com
53
Microprocessor Coin Acceptors Listing
NOTE: Coin acceptors listed include optical switch.
Replacement optic switch for Hanke acceptors is Part No. 881143.
Replacement optic switch for Greenwald acceptors is Part No. 137056.
Single Coin*
Part No.
Nation
Description
883363
United States
25¢ Hanke Optic Coin Acceptor with 4 Studs
(for models mfd. as of June 25, 2002)
882689
United States
25¢ Hanke Optic Coin Acceptor
(for models mfd. between June 15, 2000 and June 25, 2002)
125100
US and Canada
25¢ Greenwald Optic Coin Acceptor
(for models mfd. prior to June 15, 2000)
125107
Australia
20¢ Greenwald Australian Optic Coin Acceptor
881768
Australia
$1 Hanke Australian Optic Coin Acceptor
881604
Japan
100 Yen Hanke Optic Coin Acceptor
125103
———
0.882 Token Greenwald Optic Coin Acceptor
125121
———
0.800 Token Greenwald Optic Coin Acceptor
125133
Hong Kong
$1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin*
Part No.
Nation
Description
881842
Canada
25¢ / $1 Hanke Dual Optic Coin Acceptor
881542
United Kingdom
1£ / 20 Pence Hanke Dual Optic Coin Acceptor
881846
France
2 / 5 Franc Hanke Dual Optic Coin Acceptor
881541
Netherlands
25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor
* Consult factory for coin acceptors not listed.
54
American Dryer Corporation
450343 - 4
Coin Meter Replacement Parts
Illus. No.
Part No.
Qty.
1
125541
125540
125500
125501
125502
125503
125504
125506
125507
125508
125510
125515
125516
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
4
450343 - 4
Description
1/60 RPM 24 VAC / 60 Hz Meter Motor
1/30 RPM 24 VAC / 50 Hz Meter Motor
2-Point Cam
3-Point Cam
4-Point Cam
5-Point Cam
6-Point Cam
8-Point Cam
9-Point Cam
10-Point Cam
12-Point Cam
Meter Switch “B” with Arm
Meter Switch “A” or “C”
www.amdry.com
55
Voltage
Phase
Wire
Oven Wire
with Crimp Terminal
Oven
Assemblyy
Part No.
Qty.
kW
Part No.
Qty.
Size
Part No.
Qty.
Element
Part No.
Bus Bar
Part No.
121011
Cat. No.
Part No.
Terminal Lug
Oven Relay
American Dryer Corporation
30
208
3Ø
3 or 4
883603
6
5
120012
1
#2
882562
1
121010
1
DPA93
131358
30
240
3Ø
3
824972
6
5
120013
1
#4
882566
1
121010
1
DPA73
131376
30
416
3Ø
3 or 4
826391
6
5
120013
1
#8
882571
2
121010
1
DPA43
131357
30
460/480
3Ø
3 or 4
824953
6
5
120013
1
#8
882572
1
121010
2
DPA43
131357
25
380
3Ø
3 or 4
826391
6
5
120013
1
#8
882571
1
121010
1
DPA43
131357
24
208
3Ø
3 or 4
883604
6
4
120010
1
#4
882566
1
121010
1
DPA73
131376
24
240
3Ø
3
883606
6
4
120011
1
#6
882568
1
121010
1
DPA63
131369
24
460/480
3Ø
3 or 4
883602
6
4
120011
1
#8
882572
1
121010
2
DPA33
131352
20
208
1Ø
2
883607
5
4
120010
1
#2
883384
1
121010
2
DPA93
131358
20
240
1Ø
2
883608
5
4
120011
1
#4
883385
1
121010
2
DPA93
131358
20
380
3Ø
3 or 4
883601
6
4
120010
1
#8
882571
1
121010
2
DPA33
131352
15
240
3Ø
3
883605
3
5
120013
1
#8
882571
1
121010
2
DPA43
131357
Electrical Oven Component Application Chart
56
kW
450343 - 4
Additional Parts Available
Part No.
Description
114006
“WARNING – Fire Hazards” Label
112280
“Clean Lint Screen” Label
114001
“CAUTION – Exhaust / Lint Screen” Label
112533
“Phase 5 Coin Program Location Summary” Label
112534
“Phase 5 OPL Program Location Summary” Label
120100
3/8” Straight (BX) Connector
120300
3/8” x 45° (BX) Connector
120400
3/8” Red Jacket (BX) Insulator
120500
3/8” Jiffy Clip (BX retainer clip)
120600
3/8” Greenfield (BX)
120707
2-Position Terminal Strip
120708
3-Position Terminal Strip
120800
1/4” In-Line Connector
120802
Red Butt Connector
120902
#74B Wire Nut
120903
Crimp-On Wire Nut
121014
1/4” Insulated (female) Terminal
121026
Tab Receptacle Combination
121499
5-1/2” Harness Tie
121500
8” Harness Tie
122804
Manometer (hydro gauge) for Measuring Gas Pressure
404502
White Brush-In-Cap Bottle Touch-Up Paint
404516
Ivory Brush-In-Cap Bottle Touch-Up Paint
404515
Coral Blue Brush-In-Cap Bottle Touch-Up Paint
450343 - 4
www.amdry.com
57
ADC Part No. 450343
4 - 08/13/08 - 0