Download ADC AD-30V User's Manual
Transcript
AD-30V Parts Manual 24 VAC / Phase 5 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com ADC Part No. 450343-4 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________________________________ AD-30V MODEL NO. ______________ RESELLER’S NAME _________________________________________________________________________________ Serial Number(s) _____________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Non-Coin Control Door Assembly for Models Mfd. as of July 1, 2002 .......................................................................................... 4 Coin Control Door Assembly for Models Mfd. as of July 1, 2002 .................................................................................................. 5 Control Door Assembly for Models Mfd. prior to July 1, 2002 ....................................................................................................... 6 Phase 5 Non-Coin Microprocessor Control Panel Assembly ........................................................................................................ 7 Phase 5 Coin Microprocessor Control Panel Assembly ................................................................................................................ 8 Coin and Non-Coin Control Box Assembly .................................................................................................................................. 10 Dual Timer “Tap Touch” Controls for Models Mfd. as of November 1, 2000 ................................................................................ 11 Dual Timer Control Panel Assembly for Models Mfd. prior to November 1, 2000 ...................................................................... 12 Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. as of January 25, 2002 ......................................... 13 Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. prior to January 25, 2002 ...................................... 14 Coin Vault Assembly ..................................................................................................................................................................... 15 Front Panel Assembly for Models Mfd. with Steel Main Door as of July 1, 2002 ....................................................................... 16 Front Panel Assembly for Models Mfd. with Steel Main Door prior to July 1, 2002 .................................................................... 17 Front Panel Assembly for Models Mfd. with Plastic Main Door ................................................................................................... 18 Main Door “Steel” Assembly ......................................................................................................................................................... 19 Plastic Main Door Assembly ......................................................................................................................................................... 20 Main Door Switch Assembly for Models Mfd. with Steel Main Door ............................................................................................ 21 Main Door Switch for Models Mfd. with Plastic Main Door .......................................................................................................... 22 Tumbler / Support Assemblies ..................................................................................................................................................... 23 Sensor Bracket Assemblies for Models Mfd. as of July 1, 2002 ................................................................................................. 24 Sensor Bracket Assemblies for Models Mfd. prior to July 1, 2002 .............................................................................................. 26 Drop Lint Door Assembly for Models Mfd. as of July 1, 2002 ..................................................................................................... 28 Lint Trap Assembly for Models Mfd. as of July 1, 2002 ............................................................................................................... 29 Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. between August 10, 2000 and July 1, 2002 ............................. 30 Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. prior to August 10, 2000 ............................................................ 31 Tumbler Bearing Assembly for Models Mfd. as of August 11, 2000 ............................................................................................ 32 Tumbler Bearing Assembly for Models Mfd. prior to August 11, 2000 ........................................................................................ 34 Idler Bearing Assembly ................................................................................................................................................................ 36 Gas Burner Assembly for Models Mfd. as of May 20, 2000 ........................................................................................................ 37 Direct Spark Ignition Burner Assembly for Models Mfd. prior to May 20, 2000 .......................................................................... 38 Sail Switch / Hi-Limit Assemblies ................................................................................................................................................. 39 Non-Reversing Motor Mount Assembly ....................................................................................................................................... 40 Reversing T.E.F.C. Motor Mount Assembly .................................................................................................................................. 42 Electric Oven Assembly ............................................................................................................................................................... 44 Single-Phase (1ø) Motor, Electric Relay Panel Assembly ........................................................................................................... 46 3-Phase (3ø) Motor, Electric Relay Panel Assembly ................................................................................................................... 47 460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly ............................................................................................ 48 Reversing Electric Relay Panel Assembly ................................................................................................................................... 49 460-480 VAC Reversing Electric Relay Panel Assembly ............................................................................................................ 50 Steam Coil / Air-Operated Steam Damper Assembly .................................................................................................................. 51 Steam Coil / Mechanical Steam Damper Assembly .................................................................................................................... 52 Outer Top / Back Guard Assemblies ............................................................................................................................................ 53 Microprocessor Coin Acceptors Listing ....................................................................................................................................... 54 Coin Meter Replacement Parts .................................................................................................................................................... 55 Electrical Oven Component Application Chart ............................................................................................................................ 56 Additional Parts Available ............................................................................................................................................................. 57 Non-Coin Control Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty. 1 881053 870011 883550 1 1 1 883551 1 883552 1 117604 150317 102603 102601 102502 150321 154011 3 2 1 1 1 2 2 2 3 4 5 6 7 8 9 4 Description ADC Logo with Tape Double Sided Tape Kit White Control Door Assembly (includes illus. nos. 2 and 3) Ivory Control Door Assembly (includes illus. nos. 2 and 3) Coral Blue Control Door Assembly (includes illus. nos. 2 and 3) Sponge Tape (sold by the foot) #10-16 x 3/4” TORX PLUS® BTN Type 1 Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod #10-32 x 1/2” Phillips Machine Screw #10-32 Multi-Thread U-Nut American Dryer Corporation 450343 - 4 Coin Control Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty. 1 160015 160104 160016 881053 883477 1 1 1 1 1 883478 1 883549 1 883476 117604 152014 150317 102603 102601 102502 1 6 4 2 1 1 1 2 3 4 5 6 7 8 9 10 11 450343 - 4 Description High Security Lock Assembly Key ONLY Lock Cam ONLY ADC Logo with Tape White Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) Ivory Control Door with Black Trim (includes illus. nos. 4 through 7) Coral Blue Control Door with Black Trim (includes illus. nos. 4 through 7) Black Trim Strip with Lock Hole Sponge Tape (sold by the foot) 1/4-20 Free Spin Wash Nut #10-16 x 3/4” TORX PLUS® BTN Type 1 Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod www.amdry.com 5 Control Door Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty. 1 160015 160017 160104 160052 881053 870011 882511 1 1 1 1 1 1 1 882513 1 882512 1 117603 150300 102603 150300 102502 102601 3 2 1 2 1 1 2 3 4 5 6 7 8 9 10 6 Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit White Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Almond B Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Coral Blue Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Noise Suppressor Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch #10-16 x 1/2” Hex Washer TEK Screw Control Door Support Rod Control Door Rod Retainer Clip American Dryer Corporation 450343 - 4 Phase 5 Non-Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150309 136048 1 1 1 2 2 1 1 2 3 4 5 6 7 Description Non-Coin English Keypad Label Assembly Non-Coin Stick-On Labels (English Only) … Not Illustrated 3-Language Non-Coin Stick-On Labels (Spanish, Italian, and Hebrew) … Not Illustrated 3-Language Non-Coin Stick-On Labels (English, Spanish, and Hebrew) … Not Illustrated 5-Language Non-Coin Stick-On Labels (Italian, Dutch, French, German, and Chinese) … Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 Non-Coin Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 5 and 7) Phase 5 Non-Coin Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 5 and 7) Phase 5 Non-Coin Non-Reversing Microprocessor Controller (computer) ONLY Phase 5 Non-Coin Reversing Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse ONLY IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). 450343 - 4 www.amdry.com 7 Phase 5 Coin Microprocessor Control Panel Assembly 8 American Dryer Corporation 450343 - 4 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 112526 883537 1 1 883538 1 883582 1 883581 1 883539 1 883540 1 883580 1 883579 1 5 6 7 150309 137213 824998 153010 150005 –––––– 1 1 1 2 2 1 8 –––––– 1 9 10 137023 137021 880772 122800 136048 1 3 1 1 1 3 4 11 Description Coin Keypad Label Assembly Phase 5 Coin Control Panel Assembly (for models mfd. as of June 25, 2002) (includes illus. nos. 1, 2, and 4 through 6) Phase 5 Coin Control Panel Assembly with Battery Option (for models mfd. as of June 25, 2002) (includes illus. nos. 1, 2, and 4 through 6) Phase 5 Coin Control Panel Assembly with Battery Option (for models mfd. prior to June 25, 2002) (includes illus. nos. 1, 2, and 4 through 6) Phase 5 Coin Control Panel Assembly (for models mfd. prior to June 25, 2002) (includes illus. nos. 1, 2, and 4 through 6) Coin Control Panel ONLY (for models mfd. as of June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. as of June 25, 2002) Coin Control Panel ONLY (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. prior to June 25, 2002) #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 54) Optic Switch ONLY (refer to Microprocessor Coin Acceptors Listing on page 54) Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number of controller (computer). 450343 - 4 www.amdry.com 9 Coin and Non-Coin Control Box Assembly Illus. No. 1 2 3 4 5 6 7 8 9 — Part No. Qty. 132002 150300 150301 131931 137035 323583 150300 122641 122706 122801 1 2 2 1 1 1 2 1 * 1 Description Transformer (for mechanical steam dampers 208 VAC and higher) #10-16 x 1/2” Hex Washer TEK Screw #8 x 7/16” Phillips Pan Head TEK Screw Steam Valve Relay (for mechanical steam damper models Only) 24 VAC Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2” Hex Washer TEK Screw 15-Pin Microprocessor Connector Socket Terminal ONLY Pin / Socket Extraction Tool * As required. 10 American Dryer Corporation 450343 - 4 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 1, 2000 Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 824298 824299 824175 122301 131932 120730 151000 882903 1 1 1 1 3 1 6 1 9 10 11 12 13 14 15 850392 153010 152000 150207 150110 112563 124104 124105 – 2 3 2 4 1 1 1 450343 - 4 Description 15 Minute Timer – 24 VAC 60 Minute Timer – 24 VAC Red Pilot Light – 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer www.amdry.com 11 Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000 Illus. No. Part No. Qty. 1 2 3 123005 122400 882596 1 1 1 882600 1 850456 131917 150207 154001 152000 153010 120730 150110 131932 151000 112050 124103 124025 124030 132198 882540 882573 1 1 2 2 2 2 1 4 1 4 1 2 1 1 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 — — 12 Description Red Indicator Light – 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete – 24 VAC (includes illus. nos. 1 through 16) Dual Timer Reversing Control Panel Assembly Complete – 24 VAC (includes illus. nos. 1 through 17) Dual Timer Control Panel ONLY Push-To-Start Relay – 24 VAC #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Relay – 24 VAC #6-32 Pal Nut Dual Timer Label ONLY Arrow Timer Knob 60 Minute Timer – 24 VAC 15 Minute Timer – 24 VAC Reversing Timer – 24 VAC Panel Wiring (non-reversing panel) … Not Illustrated Panel Wiring (reversing panel) … Not Illustrated American Dryer Corporation 450343 - 4 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002 Illus. No. Part No. Qty. 1 2 3 123005 122400 824172 1 1 1 824109 131932 154001 123225 125601 153010 152016 120712 150300 122602 122700 122801 1 1 2 1 1 2 2 1 1 1 7 1 4 5 6 7 8 9 10 11 12 — Description Red Indicator Light – 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Less Coin Meter (includes illus. nos. 2 through 5, 7, and 8) Coin Meter Control Panel ONLY 24 VAC Relay #10-24 Speed Nut (used on P/N: 131932, 24 VAC relay) Green Push-To-Start Button 25¢ Coin Meter – 24 VAC (specify timing) #6 Star Washer #4-40 Hex Nut 12-Position Terminal Block #10-16 x 1/2” Hex Washer TEK Screw 9-Pin Connector Pin Terminal ONLY Pin Extraction Tool NOTE: For Coin Meter Replacement Parts refer to page 55. 450343 - 4 www.amdry.com 13 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002 Illus. No. Part No. Qty. 1 2 3 123005 122400 824020 1 1 1 4 5 6 7* 8 9 10 11 12 — 800054 131917 150207 154001 125601 150303 120712 150309 122602 122700 122801 1 1 2 2 1 2 1 1 1 9 1 Description Red Indicator Light – 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete – 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel ONLY Push-To-Start Relay – 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter – 24 VAC (specify timing) #4 x 3/4” Pan Head “A” Screw 12-Position Terminal Block #10-16 x 1/2” Hex Head TEK Crimptite Screw 9-Pin Connector ONLY Pin Terminal ONLY Pin / Socket Extraction Tool * Consult factory for coin meters not listed. NOTE: For Coin Meter Replacement Parts refer to page 55. 14 American Dryer Corporation 450343 - 4 Coin Vault Assembly Illus. No. Part No. Qty. 1 802112 1 802117 802110 1 1 4 802115 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 152014 102502 102601 102603 4 1 1 1 2 3 Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 4) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch * Specify key number when ordering. 450343 - 4 www.amdry.com 15 Front Panel Assembly For Models Mfd. with Steel Main Door as of July 1, 2002 Illus. No. Part No. Qty. 1 883567 1 883568 1 883569 1 3 150313 150318 –––––– 11 1 1 4 5 6 122002 170330 154215 1 1 2 2 16 Description White Front Panel Assembly (includes illus. nos. 1, 5, and 6) Ivory Front Panel Assembly (includes illus. nos. 1, 5, and 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 5, and 6) #10-16 x 1/2” TORX PLUS® BTN Type 1 25 IP TORX PLUS® Bit 1/4 Hex (for removal of TORX® head screw) Main Door Hinge (refer to Main Door “Steel” Assembly on page 19) Lint Drawer Switch Friction Door Latch 5/32” Pop Rivet American Dryer Corporation 450343 - 4 Front Panel Assembly For Models Mfd. with Steel Main Door prior to July 1, 2002 Illus. No. Part No. Qty. 1 883137 1 883138 1 883139 1 3 150313 150318 –––––– 11 1 1 4 –––––– 1 5 6 170330 154215 1 2 2 450343 - 4 Description White Front Panel Assembly (includes illus. nos. 1, 5, and 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 5, and 6) Ivory Front Panel Assembly (includes illus. nos. 1, 5, and 6) #10-16 x 1/2” TORX PLUS® BTN Type 1 25 IP TORX PLUS® Bit 1/4 Hex (for removal of TORX® head screw) Main Door Hinge (refer to Main Door “Steel” Assembly on page 19) Lint Drawer Switch (refer to Lint Drawer / Lint Drawer Switch Assemblies on page 30 and page 31) Friction Door Latch 5/32” Pop Rivet www.amdry.com 17 Front Panel Assembly For Models Mfd. with Plastic Main Door Illus. No. Part No. Qty. 1 882525 1 882527 1 882528 1 2 3 4 150309 121405 –––––– 11 1 1 5 6 170330 154215 1 2 18 Description White Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Almond B Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet Lint Drawer Switch (refer to Lint Drawer / Lint Drawer Switch Assemblies on page 30 and page 31) Friction Door Latch 5/32” Pop Rivet American Dryer Corporation 450343 - 4 Main Door “Steel” Assembly Illus. No. Part No. Qty. 1 881150 1 2 3 102354 170731 881152 1 1 1 4 5 6 150445 153031 881151 2 1 1 7 8 9 10 11 12 13 14 15 150445 150683 152014 151010 150120 150683 152014 881210 102211 170731 2 3 3 1 1 3 3 1 1 1 450343 - 4 Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Black Gasket Adhesive (10.7 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY 20-7/16” Door Glass Black Glass Adhesive (10.3 oz. cartridge) www.amdry.com 19 Plastic Main Door Assembly Illus. No. Part No. Qty. 1 881422 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 1 4 4 1 1 1 4 4 1 7 8 9 20 Description Black Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with 4 Holes Main Door Gasket / Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head screw) American Dryer Corporation 450343 - 4 Main Door Switch Assembly For Models Mfd. with Steel Main Door Illus. No. Part No. Qty. 1 2 3 4 5 6 150006 152013 153010 137005 122636 881211 881153 2 2 2 1 2 1 1 7 150301 2 450343 - 4 Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch Flag Terminal Black Main Door Switch Housing ONLY Black Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw www.amdry.com 21 Main Door Switch For Models Mfd. with Plastic Main Door Illus. No. Part No. Qty. 1 2 3 4 5 6 152013 153008 137005 121028 154281 800448 2 2 1 2 2 1 7 8 9 10 153565 881246 150201 121405 2 1 2 1 22 Description #6-32 Hex Nut #6 Lock Washer Single-Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacers 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self-Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head Screw Rubber Grommet American Dryer Corporation 450343 - 4 Tumbler / Support Assemblies Illus. No. 1* Part No. Qty. 882519 882520 882521 882522 1 1 1 1 882524 2 3 4 5 6 7 8 9 10 11 — 882523 150309 301304 322002 322003 322001 322000 322066 322067 150518 100918 153004 882517 152005 153005 153004 116002 401010 40 4 2 2 2 2 2 2 1 4 4 1 4 4 4 1 1 Description Galvanized Tumbler ONLY (without felt collar) Stainless Steel Tumbler ONLY (without felt collar) Polished Stainless Steel Tumbler ONLY (without felt collar) Galvanized Tumbler / Support Assemblies (includes illus. nos. 1 through 10) Stainless Steel Tumbler / Support Assemblies (includes illus. nos. 1 through 10) Polished Stainless Steel Tumbler / Support Assemblies ONLY (without felt collar) #10-16 x 1/2” Hex Head TEK Crimptite Screw Galvanized Tumbler Rib ONLY Galvanized Taper Tumbler Rib Galvanized Straight Tumbler Rib Stainless Steel Straight Tumbler Rib Stainless Steel Tapered Tumbler Rib Polished Stainless Steel Tumbler Rib Polished Stainless Steel Tapered Tumbler Rib 5/16-18 x 3/8” Socket Button Head Screw 3/8-16 x 26-3/4” Tie Rod 5/16” Flat Washer Tumbler Support ONLY 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube) * Felt collar is not included and must be ordered separately. 450343 - 4 www.amdry.com 23 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002 24 American Dryer Corporation 450343 - 4 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty. 1 882533 1 2 3 4 5 6 7 8 9 10 130301 153010 152000 121028 122701 122605 154007 150005 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 305007 122604 122700 150301 150005 130111 130100 130301 130101 153010 152000 882535 121028 122701 122605 818007 1 1 4 2 5 1 1 1 1 5 5 1 4 4 1 1 25 818321 1 305007 122604 122700 122801 150301 1 1 4 1 2 26 27 28 450343 - 4 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push-On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Thermostat 150° Thermostat 225° Manual Reset Thermostat 180° Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Noncomputer Sensor Bracket Assembly Complete – Includes Thermostats (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin / Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw www.amdry.com 25 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002 26 American Dryer Corporation 450343 - 4 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty. 1 882533 1 2 3 4 5 6 7 8 9 10 130301 153010 152000 121028 122701 122605 154007 150005 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 322062 122604 122700 150301 150005 130111 130100 130301 130101 153010 152000 882535 121028 122701 122605 882534 1 1 4 2 5 1 1 1 1 5 5 1 4 4 1 1 25 322062 882536 1 1 26 27 122604 122700 122801 150301 1 4 1 2 28 450343 - 4 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push-On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Thermostat 150° Thermostat 225° Manual Reset Thermostat 180° Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Universal Sensor Bracket ONLY Noncomputer Sensor Bracket Assembly Complete – Includes Thermostats (includes illus. nos. 14 through 25) 4-Pin Connector ONLY Pin Terminal ONLY Pin / Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw www.amdry.com 27 Drop Lint Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty. 1 802277 1 802265 1 117604 170226 160001 160103 5 1 1 1 2 3 4 28 Description Drop Lint Door (for non-coin models) (includes illus. nos. 1 through 3) Drop Lint Door (for coin models) (includes illus. nos. 1, 2, and 4) Sponge Tape (sold by the foot) Slide Latch (for non-coin models) Lint Door AD-100 Lock (for coin models) Key ONLY American Dryer Corporation 450343 - 4 Lint Trap Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty. 1 801070 1 800401 1 801069 800443 154200 150300 304100 800500 1 1 6 3 1 2 2 3 4 5 450343 - 4 Description Lint Trap Assembly Complete for 60 Hz Models ONLY (includes illus. nos. 1 and 3 through 5) Lint Trap Assembly Complete for 50 Hz Models ONLY (includes illus. nos. 1 and 3 through 5) Lint Trap ONLY (60 Hz) Lint Trap ONLY (50 Hz) 5/32” Pop Rivet #10-16 x 1/2” Hex Washer TEK Screw Lint Screen Holder ONLY Lint Screen Assembly www.amdry.com 29 Lint Drawer / Lint Drawer Switch Assemblies For Models Mfd. between August 10, 2000 and July 1, 2002 Illus. No. Part No. Qty. 1 883155 1 883156 1 883157 1 6 117605 122116 122605 122701 122801 818087 5 1 2 4 1 1 7 8 9 304136 150301 122700 122604 1 2 4 2 2 3 4 5 30 Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Ivory Lint Drawer Assembly (includes illus. nos. 1 and 2) Gasket (sold by the foot) Lint Drawer Switch 4-Pin Socket Connector ONLY Socket Terminal ONLY Pin / Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 3 through 6) Lint Drawer Switch Box ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY American Dryer Corporation 450343 - 4 Lint Drawer / Lint Drawer Switch Assemblies For Models Mfd. prior to August 10, 2000 Illus. No. Part No. Qty. 1 882514 1 882515 1 882516 1 7 117605 108224 122116 122605 122701 122801 800478 5 1 1 2 4 1 1 8 9 10 304136 150301 122700 122604 1 2 4 2 2 3 4 5 6 450343 - 4 Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Almond B Lint Drawer Assembly (includes illus. nos. 1 and 2) Neoprene Sponge Tape (sold by the foot) Lint Screen Assembly Lint Drawer Switch 4-Pin Socket Connector Socket Terminal ONLY Pin / Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) Lint Drawer Switch Box ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY www.amdry.com 31 Tumbler Bearing Assembly American Dryer Corporation For Models Mfd. as of August 11, 2000 32 450343 - 4 Tumbler Bearing Assembly For Models Mfd. as of August 11, 2000 Illus. No. Part No. Qty. 1 2 3 4 880220 153025 152050 882544 1 4 4 1 882545 1 882542 882543 880202 880779 150601 153004 153004 153005 152005 154326 152004 150621 153002 153004 150501 102120 824807 100724 101100 101118 101110 100100 100108 150610 152004 1 1 1 1 2 2 2 2 2 2 2 2 4 6 4 1 1 1 1 1 1 1 1 2 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 450343 - 4 Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 16, 23, and 24) Pillow Block Bearing Assembly Complete with Rotational Sensor (includes illus. nos. 4 through 18, 23, and 24) Pillow Block Bearing Platform ONLY Pillow Block Bearing Platform for Models with Rotational Sensor 1-3/8” Pillow Block Bearing 1-3/8” Pillow Block Bearing for Reversing Models ONLY 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 3/8” Flat Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet for Reversing Models ONLY Rotational Sensor Assembly Shaft Key 18” Pulley for Non-Reversing Models ONLY 18-3/4” Pulley for Reversing Models ONLY 1” Taper Lock Bushing for Reversing Models ONLY 5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY 5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY 5/16-18 x 1-1/2 Allen Setscrew 5/16-18 Hex Nut www.amdry.com 33 Tumbler Bearing Assembly For Models Mfd. prior to August 11, 2000 34 American Dryer Corporation 450343 - 4 Tumbler Bearing Assembly For Models Mfd. prior to August 11, 2000 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Part No. Qty. 880220 153025 152050 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101 1 4 4 2 2 2 2 * 2 2 4 4 4 2 2 1 801103 1 801105 801104 880779 880202 152004 150610 101100 101118 101110 100735 154301 100713 100100 100108 824807 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 Description 1-3/4” Flange Bearing with Nylock Setscrew 9/16” Lock Washer 9/16-16” Hex Nut 3/8-16 x 3/4” Hex Head Machine Bolt 3/8” Lock Washer 3/8-16” Hex Nut 3/8-16 x 1-1/2” Hex Head Machine Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 1-1/2” Hex Head Machine Bolt 5/16-18 Hex Nut 1-3/8” Bearing Box Assembly Complete for Models Mfd. without Rotational Sensor (includes illus. nos. 4 through 20) 1-3/8” Bearing Box and Support ONLY (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8” Bearing Box ONLY Pillow Block Bearing Support ONLY 1-3/8” Pillow Block Bearing Assembly with Magnet for Models Mfd. with Rotational Sensor 1-3/8” Pillow Block Bearing with Nylock Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 18” Pulley for Non-Reversing Models ONLY 18-3/4” Pulley for Reversing Models ONLY 1” Taper Lock Hub (key not included) for Reversing Models ONLY Shaft Key (for taper lock hub) 5/16-18 x 1” Allen Setscrew 1/4” x 1/4” x 7/8” Key 5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY 5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY Rotational Sensor Assembly * As required. 450343 - 4 www.amdry.com 35 Idler Bearing Assembly Illus. No. Part No. Qty. 1 4 5 6 100100 100108 101129 100105 100112 154301 100705 882576 1 1 1 1 1 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 2 3 36 Description 5L-660 V-Belt (tumbler to idler) for Non-Reversing Models ONLY 5L-680 V-Belt (tumbler to idler) for Reversing Models ONLY 9” x 2-1/2” Compound Pulley 4L-520 V-Belt (idler to motor) for Non-Reversing Models ONLY 4L-610 V-Belt (idler to motor) for Reversing Models ONLY 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolts American Dryer Corporation 450343 - 4 Gas Burner Assembly For Models Mfd. as of May 20, 2000 Illus. No. Part No. Qty. 1 2 3 4 141104 151001 150108 140820* 140806* 141230 318714 150309 128927 140411 809307 801048 810030 150300 152013 142707 142500 142800 142600 142818 817060** 2 2 2 2 2 1 1 5 1 1 1 1 1 9 2 1 1 1 1 1 1 817061** 1 850858 882269 880603*** 1 1 1 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Description Small Tube Burner #8-32 Pal Nut #8-32 x 1/2” Phillips Pan Head Machine Screw #29 Burner Orifice (natural gas) #46 Burner Orifice (liquid propane gas) 1/2” Direct Spark Ignition Manifold (2-port) 1-Piece Gas Valve Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Gas Valve Liquid Propane Conversion Kit for Gas Valve Ignitor-Probe Assembly ADC Direct Spark Ignition Johnson Module (3 tries) Johnson Direct Spark Ignition Module Mounting Bracket #10-16 x 1/2” Hex Washer TEK Screw #6-32 Hex Nut 1/2” x 1-1/2” Long Black Nipple 1/2” 90° Elbow 1/2” x 18” Pipe 1/2” Black Union 1/2” x 9-1/2” B.I. Nipple Direct Spark Ignition Burner Box (natural gas) (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition Burner Box (liquid propane gas) (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition Burner Box ONLY AD-30V Liquid Propane Conversion Kit (includes orifices) Steam to Gas Interface Assembly * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. *** Needed when converting steam heat to gas heat. 450343 - 4 www.amdry.com 37 Direct Spark Ignition Burner Assembly For Models Mfd. prior to May 20, 2000 Illus. No. 1 2 3 4* 5 6 7 8 9 10 11 12 13 14 15 16 17 18 — — Part No. Qty. 141105 151001 150108 140820 140806 141230 318700 150300 128927 140411 880960 880134 882537 128935 817027 150309 152013 141313 142809 318712 150309 850858 882269* 882603** 2 2 2 2 2 1 2 2 1 1 1 1 1 3 2 1 1 1 4 1 1 1 Description Large Tube Burner #8-32 Pal Nut #8-32 x 1/2” Phillips Pan Head Machine Screw #29 Burner Orifice (natural gas) #46 Burner Orifice (liquid propane gas) 1/2” Direct Spark Ignition Manifold (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw Gas Valve Liquid Propane Valve Conversion Kit Direct Spark Ignition Gas Valve (liquid propane kit combination) Ignitor Probe Assembly Flame-Probe Wire ONLY Direct Spark Ignition Module (3 tries) Direct Spark Ignition / Hot Surface Ignition Module Mounting Bracket Assembly #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 Hex Nut 90° x 1/2” x 1” Gas Shutoff Assembly 1/2” x 29-1/8” Pipe Gas Valve Pipe Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition Burner Box ONLY AD-30V Liquid Propane Conversion Kit Steam to Gas Transition Plate * Consult factory for elevations over 2,000 feet. ** Not illustrated … needed to convert dryer from steam to gas. 38 American Dryer Corporation 450343 - 4 Sail Switch / Hi-Limit Assemblies Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 154004 150300 802799 150303 122200 105500 319202 154002 802800 802801 1 2 1 2 1 1 1 1 1 1 10 11 12 13 14 15 142809 150300 319704 151000 150001 130201 1 2 1 2 2 1 450343 - 4 Description Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box Cover and Bracket #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push-On Fastener Sail Switch Box with Cover and Bracket Sail Switch Assembly Complete (includes illus. nos. 1 through 9) 1/2” x 29-1/8” Pipe #10-16 x 1/2” Hex Washer TEK Screw Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330° Hi-Limit Manual Reset Thermostat www.amdry.com 39 American Dryer Corporation Non-Reversing Motor Mount Assembly 40 450343 - 4 Non-Reversing Motor Mount Assembly Illus. No. Part No. Qty. 1 2 3 100105 100701 101104 101132 101131 101133 150501 153002 153001 100065 181049 1 1 1 1 1 1 4 4 4 1 1 100066 1 122701 122801 137030 152004 153002 153001 117600 154000 850017 803938* 8 1 1 4 4 4 4 4 1 1 817076 1 803809* 1 803810* 1 153050 100604 100702 153050 152006 120200 100007 2 1 1 2 2 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Description 4L-520 V-Belt (to idler motor) 3/16” x 3/16” x 1” Key (for use on 3ø – 60 Hz models Only) 1/2” x 2” Motor Pulley (for use on 1ø – 60 Hz models Only) 5/8” x 2” Motor Pulley (for use on 3ø – 60 Hz models Only) 1/2” x 2-1/4” Motor Pulley (for use on 181049 motors Only) 5/8” x 2-1/4” Motor Pulley (for use on 100066 motors Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 hp 120-230v 1ø 60 Hz 100v 50 Hz Totally Enclosed, Fan-Cooled Motor with Plug 1/2 hp 240v 1ø 50 Hz Motor with Plug (for models mfd. as of August 22, 2002) 1/2 hp 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled Motor with Plug (for models mfd. prior to August 22, 2002) Socket Terminal ONLY Pin / Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 1/2 hp 120-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 hp 240v 1ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 hp 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2 hp 208/230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 12-1/2” Impellor with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” 90° Connector 1/2 hp 208-460 50/60 Hz Motor * Specify voltage when ordering. 450343 - 4 www.amdry.com 41 Reversing T.E.F.C. Motor Mount Assembly 42 American Dryer Corporation 450343 - 4 Reversing T.E.F.C. Motor Mount Assembly Illus. No. Part No. Qty. 1 2 3 100112 100701 101132 101133 120200 181003 150501 153002 153001 100007 120200 150501 153002 153001 154000 152004 153002 153001 850070 1 1 1 1 1 1 4 4 4 1 1 4 4 4 8 4 4 4 1 803802* 1 803803* 1 117604 153050 100702 100604 153050 152006 4 2 1 1 2 2 4 5* 6 7 8 9* 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Description 4L-610 V-Belt (to idler motor) 3/16” x 3/16” x 1” Key 5/8” x 2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only) 3/8” x 90° Connector 1/2 hp 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame) 3/8” x 90° Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Tinnerman Nut 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) (includes illus. nos. 18 and 19) Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete For 60 Hz Models ONLY (includes illus. nos. 2 through 14 and 18 through 24) Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete For 50 Hz Models ONLY (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut * Specify voltage when ordering. 450343 - 4 www.amdry.com 43 Electric Oven Assembly 44 American Dryer Corporation 450343 - 4 Electric Oven Assembly Illus. No. 1* 2* 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 — Part No. Qty. 803007 –––––– –––––– 150300 802800 802801 1 1 – 2 1 1 154004 150300 802799 122200 150303 105500 319202 154002 150300 803100 320611 150301 130400 150300 154001 121010 152014 ––––––* ––––––* 120081 120080 152008 121011 ––––––* 153009 321301 150402 882603** 1 2 1 1 2 1 1 1 2 1 1 3 1 2 1 1 3 1 1 – – – – – – 1 1 1 Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push-On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 290° Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Oven Wire with Crimp Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5/8” Truss Head Machine Screw Steam to Electric Transition Plate * Refer to Electrical Oven Component Application Chart on page 56. ** Not illustrated … needed to convert dryer from steam to electric. 450343 - 4 www.amdry.com 45 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 4 5 151000 150300 150008 120716 322817 882662 2 2 2 1 1 1 882663 1 818395 1 882652 882653 818396 136008 136049 136057 150301 150297 152004 121010 153002 132459 121300 1 1 1 1 or 2 1 2 1 1 1 1 1 1 3 6 7 8 9 10 11 12 13 14 15 46 Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 2-Position Terminal Block Mounting Plate ONLY Rear Electric Panel Assembly Complete – 120 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete – 208-240 Volt for Gas and Steam Heated Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete – 208-240 Volt for Electric Heated Models ONLY (includes illus. nos. 1 through 14) Transformer Assembly – 120 Volt Transformer Assembly – 208-240 Volt for Gas and Steam Heated Models ONLY Transformer Assembly – 208-240 Volt for Electric Heated Models ONLY Fuse Holder ONLY 3/4-Amp (Slo-Blo) Fuse ONLY – 120 Volt 1/2-Amp (Slo-Blo) Fuse ONLY – 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open / Closed Bushing American Dryer Corporation 450343 - 4 3-Phase (3ø) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 4 151000 150300 150008 120701 120716 322817 882664 2 2 2 1 1 1 1 818400 1 882665 1 818395 1 882667 1 882653 818396 882654 136008 136057 150301 150297 152004 121010 153002 132459 121300 1 1 1 2 2 2 1 1 1 1 1 3 5 6 7 8 9 10 11 12 13 14 15 450343 - 4 Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block (for models mfd. with 3ø motors) 2-Position Terminal Block (for models mfd. with 1ø motors) Mounting Plate ONLY Rear Electric Panel Assembly Complete – 208-240 Volt for Gas and Steam Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly – 208-240 Volt for Electric Heated Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete – 380-416 Volt for Gas and Steam Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete – 208-240 Volt for Electric Heated Models ONLY For Models Mfd. with Single-Phase (1ø) Motor ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete – 380-416 Volt for Electric Heated Models ONLY For Models Mfd. with Single-Phase (1ø) Motor ONLY (includes illus. nos. 1 through 14) Transformer Assembly – 208-240 Volt for Gas and Steam Models ONLY Transformer Assembly – 208-240 Volt for Electric Heated Models ONLY Transformer Assembly – 380-416 Volt Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open / Closed Bushing www.amdry.com 47 460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 150009 120701 830208 824161 135501 120768 150301 150297 152004 121010 153002 132459 322817 883332 2 1 1 1 1 2 4 2 1 1 1 1 1 1 830262 1 151000 120765 121300 141403 2 4 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 48 Description #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block Transformer Assembly (460 VAC) for Micro Models ONLY Transformer Assembly (460 VAC) for Non-Micro Models ONLY 1-Amp Double-Pole Circuit Breaker (460 VAC Only) 35 x 15mm Din Rail #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 24 VAC 3-Pole Contactor Mounting Plate ONLY Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY (includes illus. nos. 1 through 14) Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY (includes illus. nos. 1 through 14) #6-32 Pal Nut End Stop Open / Closed Bushing Control Voltage Transformer (24V) for Micro Models ONLY American Dryer Corporation 450343 - 4 Reversing Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 4 5 150300 150008 120701 132458 882653 825428 882654 136008 136057 150301 150297 152004 121010 153002 132459 322812 882673 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 883335 1 882676 1 151000 120765 2 1 6 7 8 9 10 11 12 13 14 15 16 450343 - 4 Description #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block 3-Pole Reversing Contactor Transformer Assembly – 208-240 Volt for Gas and Steam Models ONLY Transformer Assembly – 208-240 Volt for Electric Heated Models ONLY Transformer Assembly – 380-416 Volt Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY – 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Mounting Plate ONLY Rear Electric Panel Assembly Complete – 208-240 Volt for Gas and Steam Models ONLY (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete – 208-240 Volt for Electric Heated Models ONLY (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete – 380-416 Volt (includes illus. nos. 1 through 16) #6-32 Pal Nut Standard End Bracket www.amdry.com 49 460-480 VAC Reversing Electric Relay Panel Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 132458 150297 121010 152004 153002 132459 150300 830208 824161 120765 322817 883327 1 1 1 1 1 1 4 1 1 2 1 1 ––––––* 1 151000 150009 120701 135501 120768 112068 121300 141403 2 2 1 1 2 1 1 1 9 10 11 12 13 14 15 16 17 18 Description 24 VAC Reversing Contactor #10 x 1/2” Hex Washer TEK Screw (green) L-70 Ground Lug 5/16-18 Hex Nut 5/16” Lock Washer 24 VAC 3-Pole Blower Contactor #10-16 x 1/2” Hex Washer TEK Screw Transformer Assembly (460 VAC) for Micro Models ONLY Transformer Assembly (460 VAC) for Non-Micro Models ONLY End Stop Mounting Plate ONLY 460 VAC Reversing Rear Electric Panel Assembly Complete for Micro Models ONLY (includes illus. nos. 1 through 16) 460 VAC Reversing Rear Electric Panel Assembly Complete for Non-Micro Models ONLY (includes illus. nos. 1 through 16) #6-32 Pal Nut #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block 1-Amp Double-Pole Circuit Breaker 35 x 15mm Din Rail (sold by the inch) 3-Phase (3ø) Power Input Label Open / Closed Bushing Control Voltage Transformer (24V) for Micro Models ONLY * Not available at time of printing. Contact factory for additional information. 50 American Dryer Corporation 450343 - 4 Steam Coil / Air-Operated Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 803416 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151006 152051 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 60 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1 450343 - 4 Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 11/16” Dia. x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve – 24 VAC #6-32 x 1” Slotted Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) www.amdry.com 51 Steam Coil / Mechanical Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165008 153002 152004 152002 153007 820321 880780 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 115995 102350 309300 154300 153022 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 ––––––* 60 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1 Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7 through 10) Steam Damper Gasket (sold by the inch) 68-1/2” Long Steam Damper Foam Rod Bracket 1/2” x 3/32” Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2” x 3/32” Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8” Pan Head Machine Screw Mechanical Steam Damper Motor Cam * The mechanical steam damper motor cam is part of the mechanical steam damper motor. 52 American Dryer Corporation 450343 - 4 Outer Top / Back Guard Assemblies Illus. No. 1 2 3* 4 5 6* 7 8 9 10 Part No. Qty. Description 322809 150301 314424 314422 150301 150300 322015 322082 322018 150301 103500 882099 1 4 1 1 7 10 1 1 1 13 4 1 Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Gas Top Back Guard Electric Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Outer Top Bottom Back Guard (for models mfd. as of March 19, 2001) Bottom Back Guard (for models mfd. prior to March 19, 2001) #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 8” to 10” Transition Piece (for models mfd. prior to March 19, 2001) * There is no outer top or top back guard on steam models. 450343 - 4 www.amdry.com 53 Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch. Replacement optic switch for Hanke acceptors is Part No. 881143. Replacement optic switch for Greenwald acceptors is Part No. 137056. Single Coin* Part No. Nation Description 883363 United States 25¢ Hanke Optic Coin Acceptor with 4 Studs (for models mfd. as of June 25, 2002) 882689 United States 25¢ Hanke Optic Coin Acceptor (for models mfd. between June 15, 2000 and June 25, 2002) 125100 US and Canada 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to June 15, 2000) 125107 Australia 20¢ Greenwald Australian Optic Coin Acceptor 881768 Australia $1 Hanke Australian Optic Coin Acceptor 881604 Japan 100 Yen Hanke Optic Coin Acceptor 125103 ——— 0.882 Token Greenwald Optic Coin Acceptor 125121 ——— 0.800 Token Greenwald Optic Coin Acceptor 125133 Hong Kong $1 Greenwald Hong Kong Optic Coin Acceptor Dual Coin* Part No. Nation Description 881842 Canada 25¢ / $1 Hanke Dual Optic Coin Acceptor 881542 United Kingdom 1£ / 20 Pence Hanke Dual Optic Coin Acceptor 881846 France 2 / 5 Franc Hanke Dual Optic Coin Acceptor 881541 Netherlands 25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor * Consult factory for coin acceptors not listed. 54 American Dryer Corporation 450343 - 4 Coin Meter Replacement Parts Illus. No. Part No. Qty. 1 125541 125540 125500 125501 125502 125503 125504 125506 125507 125508 125510 125515 125516 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 4 450343 - 4 Description 1/60 RPM 24 VAC / 60 Hz Meter Motor 1/30 RPM 24 VAC / 50 Hz Meter Motor 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch “B” with Arm Meter Switch “A” or “C” www.amdry.com 55 Voltage Phase Wire Oven Wire with Crimp Terminal Oven Assemblyy Part No. Qty. kW Part No. Qty. Size Part No. Qty. Element Part No. Bus Bar Part No. 121011 Cat. No. Part No. Terminal Lug Oven Relay American Dryer Corporation 30 208 3Ø 3 or 4 883603 6 5 120012 1 #2 882562 1 121010 1 DPA93 131358 30 240 3Ø 3 824972 6 5 120013 1 #4 882566 1 121010 1 DPA73 131376 30 416 3Ø 3 or 4 826391 6 5 120013 1 #8 882571 2 121010 1 DPA43 131357 30 460/480 3Ø 3 or 4 824953 6 5 120013 1 #8 882572 1 121010 2 DPA43 131357 25 380 3Ø 3 or 4 826391 6 5 120013 1 #8 882571 1 121010 1 DPA43 131357 24 208 3Ø 3 or 4 883604 6 4 120010 1 #4 882566 1 121010 1 DPA73 131376 24 240 3Ø 3 883606 6 4 120011 1 #6 882568 1 121010 1 DPA63 131369 24 460/480 3Ø 3 or 4 883602 6 4 120011 1 #8 882572 1 121010 2 DPA33 131352 20 208 1Ø 2 883607 5 4 120010 1 #2 883384 1 121010 2 DPA93 131358 20 240 1Ø 2 883608 5 4 120011 1 #4 883385 1 121010 2 DPA93 131358 20 380 3Ø 3 or 4 883601 6 4 120010 1 #8 882571 1 121010 2 DPA33 131352 15 240 3Ø 3 883605 3 5 120013 1 #8 882571 1 121010 2 DPA43 131357 Electrical Oven Component Application Chart 56 kW 450343 - 4 Additional Parts Available Part No. Description 114006 “WARNING – Fire Hazards” Label 112280 “Clean Lint Screen” Label 114001 “CAUTION – Exhaust / Lint Screen” Label 112533 “Phase 5 Coin Program Location Summary” Label 112534 “Phase 5 OPL Program Location Summary” Label 120100 3/8” Straight (BX) Connector 120300 3/8” x 45° (BX) Connector 120400 3/8” Red Jacket (BX) Insulator 120500 3/8” Jiffy Clip (BX retainer clip) 120600 3/8” Greenfield (BX) 120707 2-Position Terminal Strip 120708 3-Position Terminal Strip 120800 1/4” In-Line Connector 120802 Red Butt Connector 120902 #74B Wire Nut 120903 Crimp-On Wire Nut 121014 1/4” Insulated (female) Terminal 121026 Tab Receptacle Combination 121499 5-1/2” Harness Tie 121500 8” Harness Tie 122804 Manometer (hydro gauge) for Measuring Gas Pressure 404502 White Brush-In-Cap Bottle Touch-Up Paint 404516 Ivory Brush-In-Cap Bottle Touch-Up Paint 404515 Coral Blue Brush-In-Cap Bottle Touch-Up Paint 450343 - 4 www.amdry.com 57 ADC Part No. 450343 4 - 08/13/08 - 0