Transcript
S P E F C I L E ET-PKV100S Ceiling mount bracket for low ceilings D escription This ceiling mount bracket is used when mounting a Panasonic projector to low ceilings. NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKV100B bracket assembly. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W × H × D): ±15° ±15° 360° 90 × 95 × 110 mm (3-17/32˝ × 3-3/4˝ × 4-11/32˝ ) Approx. 1.2 kg* (2.6 lbs*) ET-PKV100B Weight: Applicable bracket assembly: * Average value. May differ depending on models. Parts Projector mount bracket . . . . . . . . . . . . . . . . . . . 1 Hexagonal torque wrench . . . . . . . . . . . . . . . . . . 1 Caution: • Mounting should be done by a qualified technician. • Make sure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions thoroughly before starting. • Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions. • When the product is no longer going to be used, have it disposed of quickly by a professional disposal service. Dimensions 171 ( 6-23/32) The illustration shows the ceiling mount bracket when it is combined with the ET-PKV100B and the PT-VW330/VX400 is attached. 82 ( 3-7/32) 94 ( 3-11/16 ) 132 ( 5-3/16 ) Projector 72 ( 2-27/32) 256 (10-3/32) 145 ( 5-23/32) 4 – ∅ 9 ( ∅ 11/ 32 ) 88 ( 3-15/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of September 2011 SFL11A023 1/1