Transcript
Mini DisplayPort to DisplayPort cable A C C E S S O R I E Club 3D UltraAV Mini DisplayPort to DisplayPort cable enables the connection of your Mini DisplayPort supported computer to an DisplayPort supported television, monitor or projector. Simply connect the Mini DisplayPort (male) end of the connector to your computer and plug your existing DisplayPort cable from the display into the DisplayPort (female) adapter. Setup is complete; no software to install. The circuitry built-into the adapter seamlessly converts the Mini DisplayPort’s A/V signal into an DisplayPort A/V signal and requires no external power. S Connector 1 Mini DisplayPort Male Connections Connector 2 DisplayPort Female Compatibility Club 3D graphics cards with Mini DisplayPort output or any Mini DisplayPort compatible device. Mini DisplayPort DisplayPort Length 130mm Mini DisplayPort DisplayPort Disclaimer While we endeavor to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www. club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice. Copyright © 2010, Club 3D B.V. Rev. 1.1 Item code: CAC-1110 EAN code: 8717249408512 23 September 2010 www.club-3d.com