Download Promate Claviar.7
Transcript
Claviar7 Tablet Universal Bluetooth™ Keyboard, Up to 8-inch Introduction Thank you for purchasing Promate Claviar7 a slim-lined Bluetooth™ keyboard in a leather case for tablets up to 8-inch. The leather casing is universally designed, offering foldable standing options and supports the tablet in place by a flip stopper. Features • Bluetooth™ keyboard in a Premium protective leather case • Foldable stand design for different positioning options • Built-in rechargeable lithium polymer battery • Slim-line • Ergonomic design Packaging Contents • Claviar7 • Micro-USB cable charging cable • User Guide • Warranty card Precautions Please read this User Guide carefully before using the product. The contents herein may be changed to deliver the better services to the end-user. To keep the perfect performances of the product, never use it in cold, hot, dusty or moistened areas or places, especially in the following conditions: 1. Moist or underwater conditions. 2. Conditions near the heater or high-temperature service. 3. Conditions with direct sunshine. 4. Conditions with apt falling. 5. Never dismantle this product without due permission, otherwise it may nullify the warranty clauses. 1. Product Overview Introduction The Claviar 7 is a slim-lined Bluetooth™ keyboard in a leather case for tablets up to 8-inch. The leather casing is universally designed, offering foldable standing options and supports the tablet in place by a flip stopper. The Claviar 7 is made from fine quality premium leather. It shows a slim design enhanced with a lightweight Bluetooth™ keyboard. With Claviar 7 you can easily be in control of all your typing and operational needs of your Tablet wherever you go. 2. Appearance and Interface Description 2 5 ON No. Name OFF 3 4 1 1 Bluetooth™ status indicator: Blue LED will light up when on pairing mode. 2 Power switch: Toggle switch to turn the Bluetooth™ keyboard ON or OFF. 3 Power Indicator: The LED light will go ON when the battery is Almost run out. 4 Charging indicator: Orange LED will light up when charging the Bluetooth™ keyboard. 5 Pairing button: Press to enter the keyboard on pairing mode 3. Instructional Usage 3.1. Charging the Claviar7 Before first use, charge the Claviar7 using the charging cable provided. When charging, the LED indicator is orange, and when fully charged, it will go off. 3.2 Pairing with iPad mini • Turn the switch toggle to ON and press the Bluetooth™ pairing button on the Claviar7. The Bluetooth™ LED will flash in blue and will be under detecting stage for 3 minutes. • When the Bluetooth™ keyboard is discovered, select the “Claviar7” from the iPad mini screen, a passkey will appear on the screen of the iPad. • Type in the passkey provided and press the “ENTER” key on the keyboard. Your Claviar7 keyboard will then be successfully paired with your iPad mini and ready to use. *Pairing is only needed for the initial setup. After your first successful connection, the keyboard will connect automatically to your iPad when powered on. 4. Technical Specification: Bluetooth™ interface: Version 3.0 Operating voltage: 4.2V Working current: <5.0mA Charging voltage: 5V Standby time: 60 days (approx.) Working time: 45 hours Charging time: 2~3 hours Lithium battery capacity: 180mAh Key strength: 80±10g Key life: 5 million strokes 5. Trouble Shooting: If you are unable to connect the keyboard to your IPad mini, please try the following: • Check if the battery is low. When the battery is low, some keys will react slowly and even won’t work. Then, you should charge the battery. • Check the power switch, make sure it is on. When it is on, the power light on the right top of the keyboard will flash for two seconds • Restart the Bluetooth™ switch, make sure your IPad mini can find this device 5