Download Atdec TH-PS-D project mount

Technical Specifications
TH-PS-D
Short Throw Projector Wall Mount | Dual Stud
General Features
Maximum Weight:
25kg (55lbs)
Tilt Adjustment:
ARM ±5° MOUNT ±20°
Roll Adjustment:
MOUNT ±5°
Color:
Silver
Warranty:
10 years
Dimensions
68mm
(2.7”)
10mm
(0.4”)
432mm (17”)
25.50mm
(1”)
CL
216.5mm
(8.5”)
Ø8.5mm
(0.33”)
167mm
(6.6”)
248mm
(9.7”)
167mm
(6.6”)
545mm (21.5”)
1480mm (58.2”)
41mm
(1.6”)
248mm
(9.8”)
CL
CL
99mm Max.
(3.9”)
182mm
(7.16”)
1215mm (47.8”)
1397mm (55”)
92mm Min.
(3.6”)
+5°
-5°
The Support Arm can be
adjusted by +/- 5° to account
for wall slope or individual
projector characteristics.
Dimensions
R220mm Max.
(8.7”)
4-LEG MINIMUM DISTANCE:
Ø300mm
(12”)
Ø75mm
(3”)
Bolt Circle
1.5NPT
Ø6.5mm
(0.25”)
85mm
(3.3”)
3-LEG MINIMUM DISTANCE:
Ø200mm
(8”)
100mm
(4”)
62mm Min.
(2.4”)
69mm Max.
(2.7”)
Ø157.5mm
(6.2”)
Ø100mm (4”)
Bolt Circle
Ø130mm (5”)
Bolt Circle
Ø5.5mm
(0.2”)
Ø75mm (3”)
Bolt Circle
Tilt Adjustment:
Note: Depending on where
the projector is mounted
along the support arm and
if the projector extends from
the centre of the mount
more than 8”/200mm, the
tilt adjustment achievable on
the mount may be reduced.
+20°
Roll Adjustment:
+5°
-5°
FRONT VIEW
SIDE VIEW
-20°
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 11.01.13 ©