Download Atdec TH-PS-S project mount
Transcript
TH-PS-S Technical Specifications Short Throw Projector Wall Mount | Single Stud General Features Maximum Weight: 25kg (55lbs) Tilt Adjustment: ARM ±5° MOUNT ±20° Roll Adjustment: MOUNT ±5° Color: Silver Warranty: 10 years Dimensions 84mm (3.3”) 42mm (1.7”) 160mm (6.3”) 40mm (1.6”) 100mm (3.9”) 65mm (2.6”) Ø8.5mm (0.33”) CL 119mm (4.7”) 855mm (33.7”) 30mm (1.2”) 144mm (5.7”) CL CL 99mm Max. (3.9”) 182mm (7.2”) 580mm (22.8”) 92mm Min. (3.6”) 762mm (30”) +5° -5° The Support Arm can be adjusted by +/- 5° to account for wall slope or individual projector characteristics. Dimensions R220mm Max. (8.7”) 4-LEG MINIMUM DISTANCE: Ø300mm (12”) Ø75mm (3”) Bolt Circle 1.5NPT Ø6.5mm (0.25”) 85mm (3.3”) 3-LEG MINIMUM DISTANCE: Ø200mm (8”) 100mm (4”) 62mm Min. (2.4”) 69mm Max. (2.7”) Ø157.5mm (6.2”) Ø100mm (4”) Bolt Circle Ø130mm (5”) Bolt Circle Ø5.5mm (0.2”) Ø75mm (3”) Bolt Circle Tilt Adjustment: Note: Depending on where the projector is mounted along the support arm and if the projector extends from the centre of the mount more than 8”/200mm, the tilt adjustment achievable on the mount may be reduced. +20° Roll Adjustment: +5° -5° FRONT VIEW SIDE VIEW -20° No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 11.01.13 ©