Download Bosch PSB 650 RE

Transcript
OBJ_BUCH-911-002.book Page 22 Monday, September 7, 2009 1:08 PM
22 | English
Noise/Vibration Information
PSB 650 RE PSB 750 RCE
PSB 6500 RE PSB 750 RCA
PSB 650 RA
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal:
Vibration emission value ah
Uncertainty K=
Impact drilling into concrete:
Vibration emission value ah
Uncertainty K=
Screwdriving without impact:
Vibration emission value ah
Uncertainty K=
Tapping:
Vibration emission value ah
Uncertainty K=
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2 609 004 159 | (7.9.09)
dB(A)
dB(A)
dB
97
108
3
100
111
3
m/s2
m/s2
4.5
1.5
5.0
1.5
m/s2
m/s2
35
3.5
35
4.5
m/s2
m/s2
<2.5
1.5
<2.5
1.5
m/s2
m/s2
<2.5
1.5
<2.5
1.5
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 according to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
25.08.2009
Bosch Power Tools