Download Toshiba EM1-31015 Scale User Manual
Transcript
TEC TEC Electronic Computing Scale SL-5900 (US. Version) Document No. EM1-31015 Table of Contents TOKYO ELECTRIC CO., LTD. EMl-31015D TABLE OF CONTENTS l .................................................. 1. SPECIFICATIONS 7 ..................................................... 4. KEYLAYOUT 13 ................................................... 7. CONTROLLOCK 8. LEVEL ADJUSTMENT 14 ............................................... THE PRINT HEAD OF LABEL ROLL 12. BEFORESTARTINGOPERATION .......................... 17 .......................................... Registration 18 ................................... 18 ............................................ 13.3 By Count Registration (standard function) 13.4 By Count Registration (optional function by initial setting) 13.5 Tare Function Procedures 21 .............................. ......................................... 16 17 ...................................... PROCEDURES 13.2 Fix Price Registration 15 ......................................... 11. REPORTPAPERTHREADING Commodity 15 ......................................... AND REPLACEMENT 13.1 Weighed 10 ................................................. 6. LAMPFUNCTIONS 13. OPERATING 8 .................................................. 5. KEY FUNCTIONS 10. REMOVAL 7 ................................................. DISPLAY 9. CLEANING 5 ....................................................... 2. OVERVIEW 3. REMOTE Page 1 ................................................... INTRODUCTION 22 ................... 24 27 13.6 SAVE Key Operation Sample ....................................... 28 13.7 VOID Key Operation Sample ....................................... 29 13.8 Date Change .................................................. 13.9 Calling And Printing A Grade Line 13.10 Entry ByClerk ................................................ 13.11 Add Entry By Clerk 13.12 Multiple Weight ................................... ............................................. ............................................... 29 30 31 32 33 EMl-31015D 14. TOTAL OPERATION PROCEDURES 14.1 HourlyTotalRepot-t 14.2 Grand Total Report 14.3 PLUTotalReport 14.4 Clerk Total Report 15. LISTUPOFPLUDATA 16. PROGRAMMING l Selection Page 34 ..................................... 34 ............................................. .............................................. 35 ............................................... 36 .............................................. 40 .............................................. 42 PROCEDURES of Programming 45 ....................................... Menu 45 ...................................... Menu No. 0 : Changing Unit Price or Price ............................... Menu No. 1 : Setting or Changing Menu No. 2 : Setting Store Address or Commercial Menu No. 3 : Adjusting Menu No. 4 : Setting Date, Time, Machine Number, and Store Number Menu No. 5 : CMT Operations Menu No. 7 : Changing Bar Code Format Menu No. 8 : Assigning Speed Keys PLU Data .............................. Print Position for Label Menu No. 11 : Setting Ingredient .................. Message 52 ............................ 53 ........... 57 .................................... only) (for SL-5900-35136 Menu No. 18 : Memory Card (for SL-5900-36 only) only) 60 ....................... Label (for SL-5900-35/36 Menu No. 17 : Setting Grade Line (for SL-5900-36 only) only) ............... ................ ...................... only) 61 63 64 65 66 .......................... PLU File or Unit Price (FUN System) Menu No. 21 : Setting Clerk Name (for SL-5900-36 54 55 ................................ (for SL-5900-36 On-Line/Local Menu No. 20 : Transmitting 47 ........................................ Menu No. 12 : Issuing Confirmation Menu No. 13 : Switching 46 ................ ...................... 69 70 Menu No. 40 : Setting Print Item #l ON/OFF ............................... 72 Menu No. 41 : Setting Print Item #2 ON/OFF ............................... 73 17. ERROR MESSAGE TABLE ........................................... 18. BEFORE YOU CALL FOR SERVICE 74 75 ..................................... CAUTION: 1. 2. This manual may not be copied in whole or in part without prior written permission. The contents of this manual may be changed without prior notice. 3. Please refer to your local Authorized have in this manual. Service representative with regard to any queries you may Copyright 0 1996 by TEC CORPORATION All Rights Reserved l-14-10 Uchikanda. Chlvoda-ku. Tokvo. JAPAN EMI-31015D . INTRODUCTION We thank you very much for purchasing the TEC Electronic Computing Scale SL-5900 Series. This scale has been designed with TEC reliability and offers a cost efficient system for a modest investment. The SL-5900 (with thermal printer) takes advantage of the latest technology in microprocessors and because of this, the decreased cabinet size permits the system to be placed virtually anywhere in your store. Your deli, and specialty departments can enjoy these high quality reliable TEC products. Improve your operating effectiveness and watch the enhanced utilization of your front end scanning investment. This electronic Load Cell scale eliminates all moving parts and furnishes an accurate digital display of all information. We believe that your needs will now be fully satisfied, and you will have total reliability in price calculation. Should you have any questions concerning the scale, please refer to this manual. Be sure to keep this manual for future reference. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection This against harmful interference when the equipment is operated in a commercial environment. equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case (for USA only) the user will be required to correct the interference at his own expense. I Changes or modifications not expressly approved authority to operate the equipment. “This Class A digital apparatus Regulations.” “Cet appareil numerique brouilleur du Canada.” by manufacturer for compliance could void the user’s I meets all requirements de la classe A respecte of the Canadian toutes les exigences Interference-Causing du Reglement Equipment sur le materiel (for CANADA only) Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, then contact your authorised TEC representative for assistance. -l- Safety Precautions This Owner’s Manual and the products (machines) which you have purchased contain indications which should be observed in order to use the machines safely and prevent harm to yourself and others and damage to property. The meanings of these indications and symbols are given below. Read these indications and become familiar with their contents before reading this Owner’s Manual. The following safety precaution will help to ensure proper use of the scale. . Unplug the printer whenever you are working inside the scale. . Keep your work environment static free. Meanings A c!D ,e I l of Each Symbol This symbol indicates warning items (including cautions). Specific warning contents are drawn inside the Asymbol. (The symbol on the left indicates a general caution.) This symbol indicates prohibited actions (prohibited items). Specific prohibited contents are drawn inside or near the 8 symbol. (The symbol on the left indicates “no disassembling”.) This symbol indicates actions which must be performed. Specific instructions are drawn inside or near theOsymbol. (The symbol on the left indicates “disconnect the power cord plug from the outlet”.) WA!VJlNG ;:~I:: .l I cause electric me This indicates that there machines are-i-~p~~perly . _~~-;-. -~A”uda-=~‘= shock. appliances operate. Be sure lo provide an exclusive outlet for the machine as this may cause the machines to malfunction. is the risk of death or serious injury handled contrary to this indication. I if the voltage (AC) specified on the rating plate, as this may cause fire or electric shock. top of the machines. If metal objects or spilled liquid enter the machines, this may cause fire or electric EMl-31015D cause fire n If foreign or electrical objects (metal turn off the power switches an abnormal condition such as when the machines are producing smoke c strange smells may cause fire or electric shock. In these cases, immediately turn off the power switches and disconnect the power cord plugs from the outlet. Then, contact your sales agent (or mainte- shock. fragments, n If the machines and ,, agent). Continued use of the machine in that condition may cause fire or electric shock. are dropped or thei cabinets damaged, first turn off the power switches and disconnect the power cord plugs from the outlet, ant the contact your sales agent (or maintenance and service agent). Continued use of the machine in that condition may cause flre or electric m Ensure that the equipment is properly grounded. Extension cables should also be grounded. Fire or electric shock can occur on improperly grounded equipment. age W Do not install the machines where they might be exposed to direct sunlight, high humidity, or dust. Otherwfse fire or electric shock [Precautions n Do not place to objects Durlng if the installation] the machines on unstable or slanted surfaces, as they may drop or fall and cause injury. n Do not place heavy the machines, as thes become unbalanced a -3- [Precautions When Moving the Disconnect n When moving the machines, be sure to first unplug the power cords. Moving the machines with the power cords plugged in may damage the cords and cause fire or electric w Do not lean against the machine. may fall and be damaged. It the plug. .,__ n When unpluggmg the power cords, be sure to hold and pull on the plug portion. Pulling on the cord portion may cut or expose the internal wires and cause fire or electric shock. n When careful opening the cash drawer, not to let the drawer hit n Be sure to move large scale machines with two or more people. In addition, machines should be mobed after first confirming that connecting wires between machines and externally connected wires, etc. have been removed. Failure to observe these precautions may result in injury. Precaution The following precautions @ will help to ensure that this machine will continue to function correctly. Try to avoid locations that have the following adverse conditions: Temperatures below 0°C and above 40°C Direct sunlight * Shared power socket * Excessive vibration l l 0 @ @ Do not subject the weighing platter to sudden shocks. Do not press the keys too hard. Keys will operate correctly if they are touched lightly. Clean the cover and weighing platter by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly. Never use thinner or other volatile solvent for cleaning. 0 To ensure that the scale is operating correctly, place a known weight on the platter and check it for correct weight measurement. This should be done every morning before starting normal operations. @ At the end of the day, turn the power OFF, then clean and inspect the exterior of the scale. @ Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference (freezer cabinets etc.). @ USE ONLY TEC SPECIFIED media. @I DO NOT STORE the media where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or gas. @ When moving the scale, take hold of the case and lift the scale. Never hold the remote unit. -4- be EMl-31015D 1. SPECIFICATIONS Item Maximum Capacity Minimum Scale Division Display Range Tare Unit Price Presettable Minimum Price Display Remote Diasplay : Weight Unit Price Total Price Message Display (option) Display Designations Remote Display Mode Capacity of PLU Memory Print Head Label Issue Method Available Printing Width Label Report Paper Power Requirement Current Consumption Temperature Limits Relative Humidity Dimensions (approx.) Weight (approx.) Memory Card Interface : CMT Loader l/F FUN System I/F PC Keyboard I/F TMCC I/F Memory Card I/F n Option 30 Ibs. 0.01 lb. O-30.05 Ibs. Up to 30 lbs. $0.01-99.99 $0.01 4 digits 4 digits 5 digits 16 characters (5x7 dot matrix) NET, PREPACK, INLINE, ERROR, ACCM, ITEMS Dual sides 400 PLUS (standard), 1240 PLUS max. (option) Thermal Print Head On-demand 1.65” RICOH 120LA or equivalent RICOH 115F (black) or equivalent AC 120V + lo%, 60Hz 120VlA, 60Hz O”C- +4O”C (32”F-104°F) 35% w 85% RH (No condensation) 15.7” (W) x 16.2”(D) x 18.7”(H) 29 Ibs. MC-1 28KB Standard Standard Standard Standard Standard Standard Standard Standard Standard Kit and Device Cassette Magnetice Tape Loader : PC Keyboard (for programming) : Programming Keyboard : Programming Keyboard Adapter : Message Display Kit : TMCC Cable Kit : AIWA DR-1 IBM PC-XT Keyboard, FUJITSU FKB-2831-001, FUJITSU FKB2831-101 For use of other keyboards, please conteact your TEC representative. TEC RK-3 TEC OP-57-RK-3 OP-LCDFIU-US (Except SL-5900-35-C4-US) OP-5900-TMCC Ehll-31015D W FUN System The SL-5900 is based on the FUN (File Update Network) system, which is a simplified networking This system can accommodate up to 16 terminals as a multi-drop, and system unique to TEC. allows any terminal in the system to transfer its PLU fife or UNIT PRICE data to other terminals for verification. n System Configuration ...-I-....’ Max. 16 units/system 471 ‘.. CMT Loader L I PLU File Control Procedure : Transmission Speed : Number of unit/system : FUN (File Update Network) ... Multi-drop 4800 BPS Max. 16 units -6- PLU File EMl-31015D 2. OVERVIEW ,-PC keyboard connector Platter I Message display ( \ - ~~~ Oplion: SL-5900-30/35-C2-US Standard : SL-5900-35/36-C4-US / I! Mode switch (1) Control IO&~ 3. REMOTE L Level gaugi L-Operation keyboard DISPLAY CAPACITY 30 x 0.01 Ibs NET PREPA= lb INLINE TEC ERROR Ehll-31015D 4. KEY LAYOUT W Keyboard Operation .:.:,:::.:. .I::: .\::. ~ ...:. 32 ..::..:: ;.:.:..:i. .. . ..:.:. .,.,.,. ..:...; . ..:,::.,: i. : .:>:: .;;,.;,:: ,:,::.::; “““’ ,,y::j:: FL; 0 I FOR "xM ,;, 7 8 9 4 5 6 SAVE 1 2 3 l/2 0 Tcr,, C 114 PLU s VOID x ‘2 I 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 56 59 60 ,...., . . .. . . . :. :.:,: . . . . .: 1 ~ I 1 1 I ::~ .iL:,;,. ~,,:,.,~,:,~,.,‘,‘,‘~‘,‘,‘:‘:‘~~,~~~~~. .“.‘.‘.> . . . . . . . . ..~...~.~.................:::::::::: ‘.‘.~~.:ii:.:.:.:.:.:.;:.:.: .,.,.,.,.i,.,.,., f i ; : : .,.,.,., : : -:f :‘.‘:‘:‘.‘:‘:‘:-:.: : :: : .‘;;:‘;: :: : : ::::::::::::,:i::::::::::::,: :.:z l... L.. . ,,,_,,., . . . . ,:: . . : :: ::: ::: ::: :::. ._.,.i_.,.i,./,...,.j.,....... . . ...~..~............._.......l..._. ..i. . . . ..n........ .. . . .,_. . . . :.:j::;:::::::::j: j::j.:.::::::::::::~:::::::::::::’:’: i:i-..:.: .:.:... i... :.:.,“:.:.:::::::i::::j~:::~::~~:~~~ :.:~,~~iS.~.:~;:-l:~~:~~::~~~.:.:~.~~~:~:~:~~:~~~.~:~::~:~~~~~~.~.:~:~~:~~~~~:~:: FE ED i........,. :.:.:.: ._.,_,.,L.i__,. .,.,.,l,.,.,.,.C,.,. .,.,.,.,i.,._.,.,.,.,,,...,.,...,.,...,.,...,.,...,.,...,.,.,.,.,.,.,...,.,.,,,.,.,.,...,.,.,., TEST .L”‘< ...v.n.....i. __i,.,_.,__,.,i_______...,.,.,.,.....,.,.,.,.,.,.,.,.,.,.,., .,. .,.,.,.,.,...,.,.,.,...,.,.,.,.,.,....., ,.,.,...,., ““‘.‘.‘.‘..‘.:.“-:.:j:.:‘:‘:~!~~~,.~:~~:~~~:~:~~~.~~ .........(. . ........./.._i :.:.:.:.:.:.:+:.: ........ : :. .....,. ........:.:.:.:.:::::::::::::.:: ZERO : ::..:. .,..:,.,:: NOTE : The characters (l-60) indicated on the speed keys are shown for the convenience of explanation in this manual. The indications on the actual unit are not as shown in this illustration. W Programming Keyboard COMMODITY NAME r NEXT PLU ALIT0 CODE SEND J EMl-31015D .- H PC Keyboard (for programming) n RK-3 (with OP-57-RK-KS) : ^ Keyboard (for programming) EMl-31015D 5. KEY FUNCTIONS n For Operation Keyboard Lode Switch (1) “AUTO” position: This position is used to issue regular scale labels. When the weight becomes stable, the label will automatically be issued. “MANUAL” position: ight becomes stable, the label will be issued by depressing vlode Switch (2) “WEIGH” position: This position is used in the weighing function of the SL-5900. WEIGH BY COUNT The unit price is entered directly to the total price on calling up PLU, and that total price cannot be changed by any subsequent weighing. “BY COUNT” position: It is available to produce labels which contain information on quantity pricing, instead of weight. temporary date changes. This key is used to feed labels or report paper. In the “X” or “2” control lock position, this key is used to generate step to the next step. -10 - the EMl-31015D of label issue. commodity from the platter. commodities. This key is used to subtract tare weight. This key is used to adjust the “ZERO” LABEL& REPORT PAPER key CLERK keys qL/R point. This key is used to select label printout or report paper printout. These keys are used for entry operation operation by clerk. - 11 - by clerk and add entry Et&-31015D n For Programming Keyboards Key q CLEAR 89 This key allows the clearing of numeric entries prior to the depression of another function key. It is also used to release the scale from the error mode. This key is used to select the upper or lower character indicated on the keytop when setting the commodity name or store address. q0 ti ? s 0 0 0 o x o x 0 x o o x 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 while this key is pressed down, press a character key to set the small letter of alphabet, or upper-case character indicated on the upper area of the keytop. When this key is released, the shifted status is cancelled. This key is used to recall the next PLU # (+ 1) of the PLU # currently recalled. 6 y g Function This key is used to change the PLU # currently recalled. This key is used to print out the data set in the currently q This key is used to access each programming recalled menu. PROG v This key is used toselect selectable items. 0 cl q ENTER During programming, key. data is input to the SL-5900 system using this This key is used to set the free zone of the auto code for UPC #, back the digit when setting the bar code format, and return the setting line to the first line while setting the second line and during the setting of the commodily name or store address. - 12 * EMl-31015D Function This key is used to move the setting line when setting the commodity key is pressed down, press a character key to set the small letter of alphabet. When this key is released, the shifted status is cancelled. NOTE : When the power is turned off or control lock is switched, the PC keyboard or RK-3 keyboard will be initialized to select capital letters. 6. LAMP FUNCTIONS Lamp NET PREPACK Function \ ‘/ ,yi \ ‘/ Iyi INLINE \ ‘/ yi ERROR Iri ACCM /yi ITEMS \ ‘f ;yi \‘/ \ ‘/ Lights when tare is subtracted. Lights when the SAVE key is pressed. Lights when the PLU or unit price file is updated. Lights when the scale (for SL-5900-3536) is in the IN-LINE mode. Lights when the scale is improperly operated or there is a function error. This lamp lights when items are being added to the specific CLERK memory in the add entry by clerk mode (for SL-5900-36). This lamp lights when items are being added to any CLERK memory in the sub-total operation in the add entry by clerk mode (for SL-5900-36). - 13- EMl-310150 7. CONTROL LOCK The control lock has seven marked positions. There are two control keys which will operate these locks. l Manager Key This key (MA) will access the PROGCMT, REG, OFF, M. DOWN, and REWRAP positions. l SE Key This key (SE) will access all seven positions. TSE ----I Each of the following positions on the control lock serves a different function. Function Position PROG. CMT. This position is used to set the data of the PLU, store address, printing position, date, time, bar code format, etc. It is also used to transfer the PLU file using a CMT loader. REG. This position is the normal control lock position which allow the issuance of printed labels. OFF This position is used to lock the scale power. M. DOWN This position is used to designate an item for discount pricing. REWRAP This position is used to designate X (Read) This position is used to read all the accumulated the total memory. Z (Reset) This position is used to reset all item file totals. - 14 - an item for rewrapping products. sales totals stored in EMl-31015D 8. LEVEL ADJUSTMENT @eve1 Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle. Correct Incorrect When the air bubble moves toward rear, turn the front adjustable legs clockwise. When the air bubble moves toward the left side, turn the right adjustable legs clockwise. 9. CLEANING Gauge@ THE PRINT HEAD If the print head is dirty, clear printing will not be produced. It is recommended to clean the head with thermal head cleaner everyday before starting operation using the following procedure: 1. Remove the printer cover and label cassette. Then push the head-up lever in the direction indicated by the allow. the figure to the right with the thermal head cleaner. Then set the label cassette, and push down the print head. NOTE: Be careful not to damage the print head when cleaning. hermal Head Cleaner - 15 - EMl-31015D IO. REMOVAL AND REPLACEMENT I. Remove the printer cover and right side cover. Then push the head-up lever in the direction indicated by the allow. !. Pull out the label cassette. Then remove the core of the label roll and the label backing paper. OF LABEL ROLL Label cassette I NOTE: To remove the label backing paper, loosen the paper by turning the paper winding shaft counterclockwise and remove the paper stopper. 3. Referring to the figure on the right, set the roll on the label cassette. label .~~~~~ Roll stopper Backing paper stopper 5. Push down the print head, and close the covers. NOTE: When the label roll is replaced, press the feed key to confirm that the label is issued correctly. - 16 - EMl-31015D . REPORT PAPER THREADING Roll stopper I Report paper 12. BEFORE STARTING OPERATION (1) Be sure to plug the power plug into an AC outlet. (2) When the control lock is turned from OFF to REG position, the scale goes through the test scanning sequence, such as 0000, 0000, 00000, then 1111, 1111, 11111 ... ... and zeros appear on the weight and total price displays. When the control lock is turned from OFF to PEG over 16 seconds after the power plug is plugged into an AC outlet, all “8”s appear on all displays for a moment, then zeros appear on the displays and the scale is ready for use. (3) While the scale is in the test sequence, (4) Do not move the scale while it is in operation. Should it become necessary to move it at any time, turn the power OFF and be sure to readjust the level indicator after relocating the scale. (5) Should a power failure occur during operation, remove the commodity the power plug into an AC outlet again when power is restored. (6) If the scale is used with an unrated power source, inaccurate (7) If the Zero Point has shifted during scaling, and no tare is displayed, depressing the ZERO key. do not put anything on the platter. - 17- from the platter and plug scaling or other errors may occur. adjust the Zero Point by EMl-31015D 13. OPERATING 13.1 WEIGHED PROCEDURES COMMODITY REGISTRATION Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH [Example A] In the event that an unit price of $3.00 is set for PLU#lOO. zmy:.::.:.:,:.:.:.. ...A.. ._....._i . ..i.. .: ;;@jti: YJgj”’ :.:.,:.,.::.:., :::~:;.i’L:i::: : : :.y.:!...A.., ; 1 Enter the PLU# . 2 Depress the PLU key. 3 Place a commodity (ex. 2 Ibs.) 4 Mode SW (1) : AUTO The label is issued automatically. on the platter. Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. ~ 2 00 3.00 $6.00 METW: G!F!PRICE/IS@ w* -5’ ~ 19250 VAN NESS AVE. TEL 213(320)8900 5 Remove the commodity from the platter. PLU data is returned to the PLU file. I J-----l 0.00 P 000000 __-_-- NOTE : Recalling a PLU# that has not been set in the PLU file will result in an error. depress the CLEAR key, then enter a correct PLU#. - t8- - - In this case, EMI-31015D [Example ::.-:-::y:::: B] In the event that PLU#lOO and an unit price of $3.00 are set in the speed key #I. .. :;g& : :&h’,,-. “.>:<.‘.:‘, ::,:j::;:;::::., ,\ ., ./.i_.. . . ‘. 1 Depress the speed key #l . 2 Place a commodity (ex. 2 lbs.) 3 SW (1) : AUTO The label is issued automatically. on the platter. Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. T-BONE STEAK PACKED ON C DE: 6' !Ll 2.00 NET\h’T. iG8 3.00 $6.00 Anabel &f&q 19250 VANNESSAVE. TEL 213(320)8900 4 Remove the commodity from the platter. PLU data is returned to the speed key and PLU file. NOTE : Depressing a speed key to which no PLU data has been assigned will result in an error. In this case, depress the CLEAR key, then depress a speed key to which PLU data has been assigned. [Example C] In the event that an open unit price is set for PLU#103. Enter the PLU# . 1 1 10 13 1 1 Depress the PLU key. Enter the unit price. Place a commodity (ex. 2 Ibs.) (ex. $1.25) on the platter. Mode SW (1) : AUTO The label is issued automatically. Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. 0.00 1 P 1 000103 1 0.00 0.00 0.00 0.00 1.25 0.00 2.00 1 1.25 / 2.50.1 GROUND BEEF PACKED ON !I! iF c OEC5 2.00 1.25 $2.50 NFrwr. = PRICE/lbB Cm 19250 VAN NESS AVE. TEL 213(320)8900 EMI-31015D [Example D] In the event that an unit price is $1.50 (optional function by initial setting) __ _ _ _ . Random Item PLU -:.:.,.,,: .,.,..:.: :g:;:j::;.::i yJ&F,, ..,. .,,., .‘:INo,i::.:.:,:.: : .,.. ,.......:, 1 Depress the PLU key. 0.00 0.00 0.00 2 Enter the unit price. (ex. $1.50) 0.00 1.50 0.00 3 Place a commodity (ex. 3 Ibs.) on the platter. 3.00 1.50 4.50 4 Mode SW (1) : AUTO The label is issued automatically. Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. 3 00 NET ‘(IT: Kf3 1.50 PRKUbB 19250 VAN NESS TEL 213(320)8900 NOTES 1. This operation setting. 2. is available only when the Random Although the Random Item PLU is handled PLU# 999999 in the PLU file. - 20 - $4.50 &ma a.*- s AVE. Item PLU is set to “Available” as PLUTO in the REG mode, in initial it is handled as Ehi1-31015D 13.2 FIX PRICE REGISTRATION Control lock : REG, M.DOWN, Mode SW (2) : FIX [Example A] or REWRAP In the event that an unit price of $1.25 is set for PLU#33. -.. ... ‘,: ~:‘;:y,::‘: :gi& : Jj$ i:’ :.:.:./j:.\:. .::.:.::.:.:. .. 1 Enter the PLU#. 2 Depress the PLU key. 3 Place a commodity (ex. 1 lb.) 4 on the platter. I Mode SW (1) : AUTO The label is issued automatically. Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. [Example B] In the event that an open unit price is set for PLU#32. yyEy7-Y ,... . . . . . . . . . . . . . . . . :.,. ,. ?$g,~ :‘ti;, i .::. :.:.:. + :&:~,:.:>: .:.i :.. .:.:,. ; 1 Enter the PLU#. 0.00 k-L4 P 000032 I I 2 Depress the PLU key. 0.00 0.00 3 Enter the price. 0.00 2.00 4 Place a commodity (ex. 1 lb.) 5 (ex. $2.00) on the platter. 1 .oo 2.00 I 1 CHOCOLATE MERINGUE PIE Mode SW (1) : AUTO The label is issued automatically. PACKEDON !!iF Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. JY OEC 5 19250 VAN NESS TEL 213(320)8900 - 21- AVE. II EMl-31015D 13.3 BY COUNT REGISTRATION Control lock : REG, M.DOWN, Mode SW (2) : BY COUNT [Example A] (standard function) or REWRAP In the event that PLU#302 and a price of $3.00 per 6 pieces are set in the speed key #21. :.:.. : .)... .,.,L..., .. :,$&P ::$$ ::.:.: : ,... 1:. .,. ., .,. a 1 Enter the speed key #21. ---.--I P 61 I 2 Depress the PRINT key. 3 Mode SW (1) : AUTO Labels are issued in succession after they are peeled. 3.001 I I Mode SW (1) : MANUAL Single label is issued. 19250 VAN NESS TEL 213(320)8900 NOTE [Example AVE. II When Mode SW (1) is in the “AUTO” position, the desired number of identical labels can be obtained by just depressing the PRINT key to issue the first label, then a next label will be issued once after peeling it-until depressing the CLEAR key. B] In the event that a price of $2.50 per 12 pieces is set for PLU#303. Enter the PLUH. Depress the PLU key. ---.-- Depress the PRINT key. Mode SW (1) : AUTO Labels are issued in succession after they are peeled. Mode SW (1) : MANUAL Single label is issued. 19250 VAN NESS TEL 213(320)8900 - 22 - AVE. EMl-31015D [Example C] In case of purchasing 10 pieces of commodity at a price of $1 .OO per 6 pieces *----* SPLIT PRICE (In the event that a price of $1 .OO per 6 pieces is set for PLU#39.) .,: :.:::j:j :,ii:::i:::::r::i:i, .A:.,:: :) ;::$nj$&, : I .N: -..P..Rf.G~.i,. . .:::::::::j.:.:.: L... ....i. .-$;: ....:...\... ..;:.:.>:‘-: ..._...... . . .;j,:..j, Enter the PLU #. ---.-- 2 Depress the PLU key. ---.-- 3 Enter the quantity of purchase. (ex. 10 pieces) ... max. 2 digits ---.-- 4 Depress the PRINT key. ---.-- 5 Mode SW (1) : AUTO Labels are issued in succession after they are peeled. P P P 1 000039 6 1.00 10 1.00 10 1.68 DONUTS PACKEDON Mode SW (1) : MANUAL Single label is issued. DEC 4 10 tws WiVT. = $1,68 PRiCE/?b@ m * 19250 VANNESSAVE. TEL 213(320)8900 1 1 ..I s EMl-31015D 13.4. BY COUNT REGISTRATION setting) REG, M.DOWN, Control lock : Mode SW (2) : BY COUNT [Example A] (optional function by initial or REWRAP In the event that an unit price of $1.75 is set for PLU#31. Enter the PLU #. 13111 ---.-- 000031 P Depress the PLU key. ---.-- 1.75 0.00 Enter the quantity of purchase. (ex. 2 pieces) ---.-- 2 1.75 Depress the FOR key. ---.-- 2 1.75 Depress the PRINT key. P 11 BLUEBERRY PIE 11 PACKED ON Mode SW (1) : AUTO Labels are issued in succession after they are peeled. !;F 1 DEC “5 $1.75 Mode SW (1) : MANUAL Single label is issued F’RiCE~b~ 19250 V&N NESS TEi 213[320)8900 - 24 - AVE. Lrsn8 18’ -” s EMl-31015D [Example BJ In case of purchasing 6 pieces of commodity at a price of $2.75 per 3 pieces ... ... SPLIT PRICE (In the event that PLU#826 and a price of $2.75 are set in the speed key #40.) Depress the speed key #40. 2.75 Enter the quantity of purchase. (ex. 6 pieces) Depress the FOR key. P Enter the quantity for that price. 6 2.7 6 2.7 3 2.7 Depress the FOR key. P 3 2.7: Depress the PRINT key. P 6 5.54 Mode SW (1) : AUTO Labels are issued in succession after they are peeled. LARGE SHR IMPS PACKED ON ilk! Mode SW (1) : MANUAL Single label is issued. E/Y DEC5 $5.50 PRICE/lb@ w, 19250 VAN NESS AVE. TEL 21X320)8900 - 25 - . .I- E Ml-31015D 13.5 TARE FUNCTION PROCEDURES Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH or FIX There are two kinds of tare subtraction 1) procedures, one is “Direct tare”, the other is “Preset tare”. Direct tare subtraction -_- j::xj::,:::::, L....:’ : ._ii......... 3i%i;, ;;i;: ;,,pfg.$ I:.:&$ .’ : : ::,::::. :. .A...A.... /.. 1 -;;I ‘:~~~~~ ,.. .. . ....i. . ../I .A... .A., ..). .: .. .A>. . .. . Place the tare on the platter. (ex. 0.20 Ibs.) 2 3epress the TARE key. 3 rNeighing operation. ex.) Enter the PLU#. p-jqq Depress the PLU key. Place a commodity on. Depress the PRINT key. I 0.20 P 00000 0.00 P 00000~ 0.00 0.00 P 1.50 1.00 1.50 p :. c : :. K.. 00010 0.01 1.51 BEEF LIVER PACKEDON DEC1 DEC4 SELL BY 1.oo eKETW. 1.50 $1.50 ,..- = 4 19250 VAN NESS AVE. TEL 213(320)8900 4 NOTE qemove the commodity together with he tare. rare weight is cleared automatically, hen PLU data is returned to the PLU ile. I 0.00 P 00000~ J 3 I1 --II Tare weight subtraction is available up to 30 Ibs. When tare weight ‘subtraction is in operation, however, the scalable range for net weight is decreased by the amount of the tare. (Net weight = Gross weight - tare weight) - 26 - EMl-31015D 2) Preset tare subtraction -- ., ,..-.:.::: .,...... ..i -.. ..-.-. .., ,..,.. ::;-::;*:::: .,. . . . . ,.,., . ‘. g& :;;i& . . . . . . . . . . . . .’ .:.:.: :...:.:.. a j 1 Enter the tare weight. 2 Depress the TARE key. P 3 Place the tare on the platter. P 4 Weighing operation. 5 Remove the commodity together with the tare. Tare weight is cleared automatically, then PLU data is returned to the PLU file. 3) (ex. 0.20 Ibs.) P P Preset tare subtraction when tare weight (optional function by initial setting) [Example] is included in PLU data In the event that tare weight of 0.20 pounds is set for PL J#825. *--r+*r.:i:~.~3:L::::~iiSi:~;:: .‘gzc+&~~‘ii’i s j ;::g;;:i’i:,: ii&#p g?$+* . .. :.:y: ... : :.::::::::: ,,::~:~:$.:.::.: : __( i. .-. ...i i., \. ,.i g.&$.$.:: .,..:.:.::.:,:.::::::::: .,.,., .,.,. r , I ,.y,:,:,:.: ,.,.,.. :::,:::::::::.:.:::.:r.:.: . . .C’. .:.:::.:,:,:r,.::., yaTg.,i : &g@, :. . . . ,.... . . .. . ..-.......,,... . . . . . . . . :. :...:3:.: ‘. ‘::.::.::.i...::y ..-L;rrbAir.L 1 1 Enter the PLU #. 18[2151 2 Depress the PLU key. 1.25 3 If you want to change the tare weight temporarily ; Depress the TARE Key. Enter the new tare weight. Depress the TARE key. 1.25 Place the tare on the platter. 1.25 P 000825 0.00 Weighing operation. Remove the commodity together with the tare. PLU data is returned to the PLU file. P - 27 - T 000000 .. EMl-31015D 13.6 SAVE KEY OPERATION SAMPLE REG, M.DOWN, or REWRAP Control lock : Mode SW (2) : WEIGH, BY COUNT, or FIX The SAVE key is used to save tare weigh, unit price, and PLU data after taking a commodity platter. Place the tare on the platter. (ex. 0.20 Ibs.) Depress the TARE key. Enter the PLU#. (ex. PLU#lOl) Depress the PLU key. Depress the SAVE key. The tare weight and PLU data are saved. 6 Place a commodity on. (ex. 1 lb.) 7 Mode SW (1) : AUTO The label is issued automatically. Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. 8 Remove the commodity the tare. together with 9 Depress the CLEAR key. Save mode is cleared. 10 Enter the 0. 11 Depress the TARE key. The tare weight is cleared. 12 Depress the PLU key. The sacle is returned to the initial mode. 1.50 1.50 00 1.50 P - 28 - off the EMl-31015D 13.7 VOID KEY OPERATlON SAMPLE Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX On depressing the VOID key, the data of the last registration is subtracted from the memory. .:.:.: :.:.:.: :.:.:.;.:.:.:.:.:. .:.,...,... >> .......,.,,. .f$$.fc.,. ::Q& !.X;1.I .,.:,:.:...:.; ::i .:,< .:: ,.-..i_. ,. .A....... : . ..z.::y ., i :... .,. ..::.;::‘,..:. ~~~~~~. ;;&i :..Nw .. ... ... .. .. . :;;‘i:i;,f:,;,;i t.FSRlCE . . . . ..i .,:. . . . .,. . :.’ :~:.3’...-.:: ,. _.. ~ ..:,::, _/ ‘_.> . . . . :... . . . ._..._.. i,’ 1 Enter the PLU#lOO. P 2 Depress the PLU key. 3.00 0.00 3 Place a commodity 3.00 3.00 4 Mode SW (1) : AUTO The label is issued automatically. ---.-3.00 ---.-3.00 on the platter. .. !zzz :.:.:.:.:. ,:.::::y: PI:.. E: :y; u .,_,.., 000100 Mode SW (1) : MANUAL The label is issued after depressing the PRINT key. 5 13.8 Depress the VOID key. The data is subtracted from the memory. DATE CHANGE Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX The date can be changed temporarily. Depress the DATE & TIME key. Enter the new date. ex.) Dec. 5, 1989 i 20589 120589 T-CL Year Day (01 - Monlh (00 lo 99) to 31) (01 to 12) Depress the PRINT key. 000000 - NOTE The SL-5900 will check details of date input, and any wrong date will result in an error mode. The correct date should be re-entered after depressing the CLEAR key. - 29 - EMl-31015D 13.9 CALLING AND PRINTING A GRADE LINE Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX A required Grade Line of those programmed (maximum 49 Grade Lines) can be call and printed on the label to be issued, for the purpose of adding a short message to the commodity name. .. i.. ..i. . .. . . . . . .,; .:.:...:.:.:.:.: .: ::,: .// >:I::,: f$&? I ‘:‘:j@; :: >;:+::::i::zi:i:;:::i: m 1 Enter the PLU#lO9. 2 Depress the PLU key. 3 Depress the G.Line key. 4 Enter the required Grade Line #3 (Max.49) 5 Depress the PRINT key. ---.-- ------ P 3 1 .oo NOTES : 1. The Grade Line # to be called in this operation must be one of those programmed beforehand. If a Grade Line # of no programmed data is entered, a “DATA ENTRY ERROR” will result on the following [PRT/*] key depression. 2. When a Grade Line Entry is operated after a PLU Entry as in the example above, the Grade Line content is not displayed in the Messasge Window but is printed on the label. On the contrary, when a Grade Line Entry is operated before a PLU Entry, the Grade Line content is displayed in the Message Window but is not printed. 3. The Grade Line print position (above or below the Commodity by Initial Setting. 4. The maximum number of grade line characters - 30 - is 26. Name line) is determined EM-31015D 13.10 ENTRY BY CLERK Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX The entry by clerk mode is used to print out clerk sales data on labels. g& 9’,fj&J::., .::.:+..:..:. >. 1 Enter the PLU#33. 2 Depress the PLU key. 2.50 0.00 3 Place a commodity 2.50 2.50 4 Depress the CLERK key. Depressing the CLERK key allows a receipt to be printed out. 2.50 2.50 NOTES : 1. 2. on the platter. PLUS can also be called by using the Speed key. In the entry by clerk mode, a label is manually issued and its data is recorded CLERK TOTAL memory, regardless of the position of switch (1). - 3t- in the EMl-31015D 13.11 ADD ENTRY BY CLERK Control lock : REG Mode SW (2) : WEIGH, BY COUNT, or FIX The add entry by clerk mode is used to print out receipts. Enter the UR key. Enter the PLU#l50. Depress the PLU key. Place a commodity on the platter. ex.) Depress the CLERK key. Depress the 0 key. Enter the PLU#20. Enter the VOID key. Enter the PRINT key. - NOTES : 1. The Speed key can be used for calling the first PLU but cannot be used after pressing the 0 key. 2. Depressing 3. There are three kinds of void operations: 1) 2) 3) 4. the CLERK key causes the item total to be displayed Item Correct . _ . . . Void .... ... ... All void .... ... . as “SUB-TOTAL”. Depress the CLERK key, followed by the VOID key. Deletes an item which was previously added. Depress the 0 key, followed by the VOID key. Up to 48 items can be added in the add entry mode. - 32 = EMl-31015D 13.12 MULTIPLE WEIGHT Control lock : REG, M.DOWN, Mode SW (2) : WEIGH or REWRAP This mode can be used when the option for multiple weight has been selected, price can be changed or the unit price is open. and the entry unit yz?Tzyxr ..‘........ -;$~;g,::~:;: : .,...,.,.,. .I. . . .,.. .’ :I.: W: .Xl I .J. :: rJ : .L j .:.:.:y fli,, : ..~@&~:: ,., .:...:.>..: .(..,. :.:.:.,.:...: $g@P. ;;::.:+.. :::.:.:.:.::.:..,,\, 1 Enter the PLU#60. 1 2 Enter the Purchased Quantity. (Numeric entry = l-9) 1 0.03 0.00 3 Depress the FOR key. 3 0.00 0.00 4 Enter the unit price. (ex. $5.5) 3 5.50 0.00 5 Place a commodity on the platter. 3 5.50 3.68 3.00 - ex) The amount for buying 21b of a product which costs $5.50 per 31b is automatically - 33 - calculated. EMl-31015D 14. TOTAL When the reports. When the printed on When the labels (for control control labels control except OPERATION PROCEDURES lock is set to the “X” or “Z” position, it is available to issue READ or RESET lock is set to the “X (READ)” position, the totals will not be cleared as they are (for except the hourly report) or report paper. lock is set to the “Z (RESET)” position, the totals will be cleared as they printed on the hourly report) or report paper. NOTE: Before printing out totals on the report paper, change the initial setting. 14.1 HOURLY TOTAL REPORT The hourly total report is printed on report paper only. Enter the report #l. HOURLY REPORT bEIN MnIKEI16 STOREI 7 IKUR 15-16 16.17 17.18 18-19 19-m TOM EC/ l/89 1942 CtulT wuil wwds 69 36.93 107.65 f % 17.7 65 51.75 1266.11 I % 2lJ.B ia aha ill.60’ s 4 18.3 12 50.83 121.56 s % 20.0 93 61.88 161.67 s % 23.3 267 2h1.87 600.29 EMl-31015D 14.2 GRAND TOTAL REPORT ::$;:g;:;:;:::. ; .: ,....: . .... . . . :~f.g P : W: $ :. 2 .::’ -k::: p$[:: ::::$i:$$:,:’.. . ... 2.. ... .-........... 1 Enter the report #2. 2 2 Depress the PRINT key. 2- 3 Enter the #1 : #2 : #3 : 21 22 23 4 total memory #. Day total (Normal) Mark Down total Rewrap total Depress the PRINT key. Day total : nn GRAND TOTAL GRAND TOTAL l&m REm PACKED ON DECI SELL BY NO fwltrS 16 smll NETw2g34 390 680.20 . PRKVlbB l l . -. &g&e&& 19250 VAN NESS AVE. TEL TOllI 213(320)8900 CaJlil 39l Kc/ l/89 19:Y Rluil 236.3 rJuRQ3 680.20 , Mark Down total : GRAND TOTAL PACKED ON DEC 1 SELL BY HO 7.98 NETWT. m I 27.42 30 PRICE/lb@ w , 4 --, 19250 VAN NESS AVE. TEL Rewrap total 213(320)8900 GRAND TOTAL PACKED ON DEC 1 SELL BY RQ 7.54999856 27.54 NETVIT. UBi4 PFlfX/?b~ u ( > .- 19250 VANNESSAVE. TEL 213(320)8900 - 35 = GRAND TOTAL iN%wllwJ ftxnIH1 16 DEc/ 149 mREl7 19:#I m lmr rm.M TOTi% 30 7.98 2I.U GRAND TOTAL EMl-31015D 14.3 1) PLU TOTAL REPORT Individual [Example] total Individual PLU total (PLU#lOO) in the day total memory. -I-Y-yY .::..::.:... ‘~~~~i:i ‘:~‘l.::.:,‘:’ ,:,$@iE:g..‘: ,. .._ .,. : /\:... :.:. . ,: -‘::~:.:‘.:i::ll.:::,::~:?:~.~, 1 Enter the report #3. 3 2 Depress the PRINT key. 3- 3 Enter the total memory #l. 31 4 Depress the PRINT key. 31 5 Enter the search code 1. Code 1 : PLW Code 2: UPC# 311 Depress the PRINT key. 311 q Enter the PLU#lOO. 311 q Depress the PRINT key. 311 - PLUTOTAL PACKEDON PLU# NO 000100 PLUREPORT DEC 1 SELL BY Ftu I ODolDl NolwlRFAD 95.99 287.97 im.0 5OF GfWIDOIUYISI 42.3 2h - 36 - EMl-31015D 2) Block total [Example] UPC block total (UPC#250820-250829) in the mark down total memory. 1 Enter the report #3. 3 2 Depress the PRINT key. 3- 3 Enter the total memory #2. 32 4 Depress the PRINT key. 32 5 Enter the search code 2. 322 6 Depress the PRINT key. 322 q 7 Enter the UPC#25082. 322 0 8 Depress the III0 322 IJ 9 Depress the PRINT key. NOTE : The m approzte key. 322 kev. reoresents 0 throuoh 9. . number of the 0 keys. III PLUTOTAL UPC HO i ~ DEC1 ~ 25082- eNFfWL 2.66 = 19250 V&N NESS TEL 213(320)8900 2 25082 25082 - 3 Most significant digit in starting number followed by PAWEDON SELL BY - PLUREPORT LREmMaoMREfa IfICIIIH#16 srma 7 6.12 ‘ , .- MU 1189 Whl Ft coull RIGHr WllM s x 2sam 2 2.66 6.12 1M.O AVE. KM - 37 - 2 2.66 6.12 1M.O 5 OFc&id [WUIIRSI22.3 EMl-31015D 3) Zone total [Example] PLU zone total (PLU#lOO-303) in the rewrap total memory. 7 :p$.;:f$f:!. :.:.>:...:.,.~ ‘[$$+-.& jJ&j;’ ., ., ,..., . . ..v.. . . . . _i..._i i.... .:...:.:.::.:.. - 1 Enter the report #3. 2 Depress the PRINT key. 3 Enter the total memory #3. 4 Depress the PRINT key. 5 Enter the search code 1. 6 Depress the PRINT key. 7 Enter the start PLLMOO. 8 Depress the FOR key. 9 Enter the end PLW303. 10 Depress the PRINT key. PLUTOTAL PACKED PLU# ON RO SELL BY 000100-000303 5.32 NETW. IlB ~ufrm1m-mn#13itfw tWtIH1 16 STaif#7 21.98 52 PRlCE/lb~ 19250 VAN NESS TEL 213(320)8900 PLUREPORT DECI m ( , ffm Kc/ 149 1942 -- AVE. TOM 5.32 21.98 tm.0 5OFGRIWWIwRsl79.8 52 EMl-31015D 4) Entire total [Example] Entire PLU total in the day total memory. Enter the report #3. Depress the PRINT key. Enter the total memory #l. Depress the PRINT key. Enter the search code 1. Depress the PRINT key twice. PLUTOTAL PLUREPORT RU t flu HoRI#REAo PACKEDON PLU% NO ALL rYICHlRt 16 STW 1 680.20 PRlCE/lb~ 19250 VAN NESS TEL 21X320)8900 DEW149 19:13 Rut #WIT WM WURRSS% Wl BLUEBERRY PIE 3.54 9.m 1.b tlmJ32 UtLln tERlKXPIE PA2 18.84 2.0 Km33 tdbhm#I I 1.33 S.bl 0.8 m39 rsmi 62 0.m 10.36 1.5 bm AVE. MIxi CHlcKEH UIKi 181 0.M liiYJ83 ao5TEM 2.66 ml821 4 FltErS 2 6.63 au825 5wfs bfJ.Ul 5.9 6.12 0.9 lb.s! 2.1 13.33 2.0 woBz6 Liil Siii 11.M 1.6 tm9 &Ew)I(s 3 15.93 999999 5 7.59 3s.as 5.3 10.98 1.6 TOM 39u 2363 680.20lM.O %of Ijwyo ttlu%sl loo.0 - 39 - EMl-31015D 14.4 1) CLERK TOTAL REPORT (for SL-5900-36 only) Clerk total This is valid only when intial set 1 l-l is 1. .:,:j:: ::..::: : ,. ::;g& ,;,Nij;. .,............ ::... .:.: .,. .,:.:.:.:..: ,.,. >)>; :,;.:.:. 1 Enter the report #4. 4 2 Depress the PRINT key. 4- 3 Enter the clerk memory #l . 41 4 Depress the PRINT key. 41 - 5 Enter the total memory #. #l: Day total (Normal) 411 #2: #3: 6 Mark Down total Rewrap total 412 Depress the PRINT key. 41n 413 NOTE: When the option for label has been selected by initial set 9-2, the data for clerks 1 to 6 is printed on labels in on-demand dispensing mode (a clerk is skipped if its data is 0), and finally the gross total is printed. For report paper, the data for clerks 1 to 6 and the gross total are printed. I CLERK TOTAL CLERK TOTAL FxclmoN PLCWON CLERK ll I I.KAWAHATA *flom 2 - aEv~y2g "baauxI... 3.57 15.12 2 YIWT. 4401-A BANKERS CIRCLE AT. TEL 123(233)8900 OCT 29 aE!L BY CLERK I 5 A.SUZUKI m PXE,?I k.],&&,z& 4401-A BANKERS CIRCLE AT. TEL 123(233)8900 r CLERK TOTAL PAcxEt ON CLERK il 2 JIW USHIJIHA NT ant ay 29 -‘-=CLERK TOTAL tloRt!a REAO _-- ttxHINE10 STOW0 0fPT.W 0 ocrm9o 13:M CLERK ti CLERK NM ITEh5 OOLLMS 1 I.KIWAIYITA 35 2 JJH.USHIJlii : 3.57 3 I ff : fiSU2W 2 15:12 6 0 0.w CLERK t ALL TOTIll -4o- 6 22.26 EMl-31015D 2) Clerk name With the SL-5900, the “X” position. ..:.:.:.:.:::::.. . .A... .\.. the setting PLU data can be listed on report paper when the control lock is set to w : .: ..,.......,... .. ..,. .,. ., ;. j ycxp’ ;: ,:giy$ ;;;g@ z::>y+ m ; ..::; .._.. .g ;r...A.. ..:...:.:.: iiii : .. : ..;gRG;s: .._ .,.::.: .. .. ...... ..:...... .... ....-...:. .... ....... .... .......... : “, 1 Enter the report 374. 4 2 Depress the PRINT key. 4- 3 Enter the clerk memory #2. 42 4 Depress the PRINT key. 42 - I - CLERK NAME UEftKl .I 2 -i 5 6 - 4t- URK NRIE I.WIMIR JiH.usIlJl~ H.nlKITsu S.suNKI R.YJ2MI T.AspxA EMl-31015D 15. LIST UP OF PLU DATA With the SL-5900, the setting PLU data can be listed on report paper when the control lock is set to the “X” position (optional function by initial setting). Before listing, set the report paper on the label cassette and install it correctly in the scale. Enter the report #51. Depress the PRINT key. Enter the PLU #. List up the individual PLU ex.1) report. (PLU #lOO) Enter the PLU #lOO. 3x.3) List up the block PLU report. (PLU #820 - 829) Enter the PL #82. Depress the 0 key. PI List up the zone PLU report. (PLU moo -303) Enter the start PLU #loo. Depress the FOR key. Enter the end PLU #303. ex.4) List up the entire PLU report. sx.2) 4 Depress the PRINT key. 100 82 82- EMl-31015D W Ex.1) Sample Reports Individual PLU report Ex.3) PLUPROGRAMED DATA l-u I al1w tKliIRI 16 ma 7 PtuI mm Zone PLU report PLUPROGRAMED DATA PtuI BAYJlM-w3u3 MIIIM 16 STaa 7 lw 149 1945 #)noolTyllEscvTlOH T-M S&w &t lZ!NO SfU / lb 3.ti Tlyll 0.m SXLFLIFE 5 Iv4 t comITy llEslxIPTIW aum T-~~~STW m 1idtM Siffi / lb 3.M ME 0.M YUF LIFE 5 ilm101 BEEF LIVER w: Ex.2) EC/ 1m 1949 lit+llOl s#R / lb 1.9 TARE 0.20 3El.FLIFE 3 MO102 W SlRtOlN s12aER STEM M tal[P 8w / lb 3.50 TfE 0.M SELFLIFE i 03103 oKlIlaEEF Block PLU report w: 1Mlm #ii / lb tlPEi/ TARE 0.m3a.F LIFE 1 ml1 PLUPROGRAMED DATA RUI l.lw- tWlIHI 16 STcEl7 ow 149 1948 Mu CHIcm w: 1m1 m / lb 0.75 Tfa 0.m !!JaF LIFE 6 lIlm2 WlacNLEG5 w: 1m 8w 1 lb 3.M Tfdif 0.M SELFLIFE I cm03 MICKMUllbi w: 11303 Sffi 1 lb 2.50 TfE 0.M SELFLIFE s EMl-31015D Ex.4) Entire PLU report PLUPROGRAMED DATA DARE 0.00 ~ENIFE 4 omll wI.FCmIHs w: lmt fiR / lb 0.75 TYIE0.00 3ELFLIFE 6 m302 #IicKEHm ~ 120302 S’fii / lb 3.M TrylE 0-m WLIR6 an03 UmDl UlE w: 1M303m / lb 2.9 ME0.mSELF LIFE 5 m CaSTEMs m#ul ME 0.M QELFLIFE 3 COD FltETS bt2508M m250821 ml lb 2.30 m/lb 2.50 TINE0.M 9El.FLIFE 3 LIB!25 YlfItPs m = ml/2lb 1.25 TM 0.20 3aF LIFE 3 wo826 lHESMItf’S w:250826 #!I lb Mf 0.00 SW LIFE MO829 fiiuaDs#wDwwN(s w:250829 #fk!/ lb LIFE 999999 2.75 1 2.25 TM0.mw 7 Rm m/lb @f/i rta0-mWLIR0 -&I- EMl-31015D 16. PROGRAMMING l PROCEDURES Selection of Programming Menu Turn the control lock to “PROGICMT” position. Select the menu #. (Refer to table 1.) P n Depress the PROG key. Pn t P n Menu #. Start the programming. Depress the PROG key. (Finish) Return the step #2 or select another mode. 1 W Table 1 : Programming Menu Numbers and Their Functions item Menu No. 0 1 Changing Unit Price or Price Setting or Changing PLU Data 2 Setting Store Address or Commercial Message 3 4 Adjusting Print Position for Label Setting Date, Time, Machine Number, and Store Number 5 CMT Operations 7 Changing 8 11 Assigning Speed Keys Setting Ingredient Bar Code Format 12 Issuing Confirmation Label (for 311-5900-35136 only) 13 Switching 17 Setting Grade Line (for SL-5900-36 On-Line/Local (for SL-5900-35136 only) 18 20 Memory Card (for SL-5900-36 only) Transmitting PLU File or Unit Price (FUN System) 21 Setting Clerk Name (for SL-5900-36 40 Setting Print Item #l ON/OFF 41 Setting Print Item #2 ON/OFF only) only) EMl-310150 o Changing Unit Price or Price The unit price or price in the PLU that is previously stored can be changed with this menu. w ,j.:::.:.:;+: ;,::y:...:.:..: ,y.J$i .~~~~ .......... .A.... .,......... .._.,. ... .__ .. ./,. .\ ..:::,:...;.:. :‘::::. p&&&& Menu P #. PLW. ENTER 0 PO 31 PO 101 PO 1.50 PO 1.25 PO 101 The smallest PLU# in the memory is displayed. I New unit price 2 1 5 or price. 0 TEST The setling label is issued. 0 PROG. ’ ii (Select another menu or mode.) - NOTES: I. Recalling a PLU# that has not been stored in the FLU file will result in an error. 2. It is not available to change the unit price of a PLU if it has been set to “open price”. - 46 * L EMl-31015D 1 Menu No. 1 l Setting or Changing 1 PLU Data Setting or changing the contents of PLU (PLU#, UPCX, Commodity Menu AUTO Name, etc.). P #. CODE Pl 1 Pl 10 Pl 10 Pl 1 Pl 1 Pl 2 Pl 2 ‘1 3 for the UPW. I PLU#. 1 UPCH. (continued on next page) NOTE: UPCX is set after overwriting with the data of AUTO CODE. ex. 1) Input 101 ex.2) Input 1234 AUTO CODE : 120--AUTO CODE : 120--UPC# : 120101 UPC# : 120234 - 47 - The smallest PLU# in the memory is displayed. EMl-31015D :,, .e g:’ E‘i )y j:: j & Commodity 2nd line setting. r-l ENTER Quantity. ‘T Unit price price. or wI 4 Pl 5 P 0 '1 10 '1 0 '1 3 '1 0.00 21 1.50 Pl L-l Opentprice. ENTER Unit price Pl '1 flag '1 ~-__ ‘6’ ENTER w 2 (continued on next page) '1 EMl-31015D Shelf Tare life. ?l weight. rh 2 0 ‘1 0.20 ‘1 0 ‘1 0 i,_l ENTER + a WEIGH -0 mode BY COUNT FIX PRICE - 1 ---b ‘I 1 - 2 -----b ‘1 2 ‘1 101 J 1 mode mode I PROG. (Selecl anottler menu or mode.) NOTES: 1. The commodity name can be set in two lines. Each line can contain up to 26 characters including spaces. Before setting the second line, depress the RETURN key. 2. When the quantity is 1 or more (PLU in BY COUNT mode), the unit price flag is skipped automatically. 3. When the quantity is 1 or more (PLU in BY COUNT mode), the tare weight setting is skipped automatically even if the tare weight setting has been enabled. - 49 - Ehll-31015D n Changing PLU Number ?x?? :..::::.::. ..:.:.:. g.:i E.X. jr.;., ,:::: ..:, j..& Menu Current New 1 P PROG. Pl CHANGE PLU Pl #. Pl PLU#. PLW. ENTER Pl 3 5 Pl ENTER Pl tl P PROG. (Select another menu or mode.) NOTE: It is not available to change to a PLU# which has already been used in the PLU file. - 50 - -. i-:. L :: :I”:” q:::’ E:. .bY” EMl-31015D n Deleting Menu PLU Data P #. Pl Pl Pl PLW. Pl cl PROG. (Select NOTE: another menu or mode.) All the data programmed for PLU#103 in the PLU file is deleted. during a PLU deletion, it has not been reset or PLU# designated not been preset in the PLU file. -51 - If the scale goes into error in the above procedure had EMl-31015D 1 Menu No. 2 l Setting With the SL-5900 Store Address scale, the store or Commercial address or a commercial 1 Message message can be set in the memory. ..: ji.:.j:~:::::~:‘:~~:l;~: :qg;g,; ..i ; .pBtCE :. Menu : ‘..:.::.:..: ‘,, : : :.:.: . . . . . . . . . . . . .// ,., :., ..:.:...:.p>:.: >:. 2 #. 1 0 Enter the address or commercial 2 (Select NOTE: another menu or mode.) The store address or a commercial message can be set in two lines. Each line can contain up to 26 characters including spaces. Before depress the RETURN key. - 52 - setting the second line, EMl-31015D l Adjusting Print Position for Label When a printed data position deviates from the normal position in the forward or backward along the label feed direction, adjust the print position using the following procedure. direction ,::‘li il .:I :‘! Y Menu %. P3 Ll P3 value. Ll 1 100 t Feed m _,_,... A. ..i.. Fj, g;; ..:...:.:,.: - - Standard 110 (O-199) 1 dot = 0.154mm 1 gradatic ENTER % P3 L2 5 t P3 Commodity name position. (0- 9) L2 far va St: 6 1 gradation = 3 dots = 0.462mm P3 Address P3 position. L3 5 L3 t Standa rd va 4 (O-9) 1 1 gradation = 3 dots = 0.462mm ENTER % P3 P (Selecl another menu or mode.) -L- NOTE: 1 Ll 110 3 - - - - When the print position for a commodity name is lowered or raised, the print position for the address is also lowered or raised. After adjusting the print position for the commodity name, make sure to confirm the print position of the address. - 53 - EMl-31015D l Setting Date, Time, Machine Number, and Store Number ..K ..._,..., :... ;’ .: ‘:& .‘.-.I g.:.,;. 8”: ?; s:.:’ ‘:k :. A:: :c.,, t.. F:.:, $‘i;: :: 1.1. ‘o 1. (+’ t,:‘;...g ..:. A:.;. &:: ..,.7.:. iLi Menu 3 #. 4 :,11 ‘4 Current setting date 12 Dale. (cx. Dec. Month 1, 1989) (01 - 12) liEI El 0 1 a 9 1201 Day (01-31) Year (00- 120189 99) ‘4 ENTER Time. i 13089 c (ex. 15 : 30) 15 l!!l!J 3 0 Hour (00- I- Current setting time. 15 23) 1530 Minule (00-59) czl ‘4 ENTER Machine 800 ‘4 #. 16 ‘4 Slore 7 ‘4 #. ‘4 DEPT# (for C4-36 MAX. 5 digits ‘4 la ‘4 120189 only) 3 (Select another menu or mode.) 4 1- - 1 - -_ NOTES: 1. Express all time in a 24 hour military format. 2. The SL-5900 will check details of date (time) input, and any wrong date (time) will result in an error mode. The correct date (time) should be re-entered after depressing the CLEAR key. -54- L EMl-31015D 1 Menu No. 5 1 l CMT Operations The The This tape SL-5900 is designed to interface with a Cassette Magnetic Tape loader. CMT loader allows the transfer of the entire PLU file from the SL-5900 to magnetic tape. In turn, information from the magnetic can be accomplished in a number of operation steps. can also be transferred to another SL-59bO. ..........~... ... ...........,. ,. ,.... ......./.. ..........\... .;.:.:.:.jij,.,.,.,,,.i,.,.,. .,.j,.j,,.,.,,,.,.,.,.,.. :“~~~~: i :_i~~~~~EI’ 7 I: ‘. r3.. / ‘:. 5.” , j.:. i !g :::~~j’:ii:I-!p:‘:::~:.: .: ;;1. Menu #. P 5 5 I P5 PROG. Load the tape into the CMT loader. niI-Im SAVE (59004XlT) VERIFY (5900 = CMT) LOAD 3 (5900tCMT) VERIFY (5900 = CMT = SL66) P5 1 P5 2 P5 3 P5 12 P5 13 (for SL-5900-35) ----Em+ LOAD (5900cCMTtSL66) (for SL-5900-35) P5 Rewind P 1: or 13) n the Tape. P (Se&l another menu 5 or mode.) L - 55 - - - - - ! EMl-310150 NOTES: 1. The error mode can be released by depressing the above steps. n the CLEAR key, and operated 2. Use the metal cassette tape which is commercially minutes recording. 3. For operations loader. available and has a capacity of 45 or 60 of the CMT loader, refer to the instruction Error Code during manual provided CMT Operations TOTAL PRICE pRq Error Code A l-7 - Phenomena Hardware error 8 Verify error 1 Character over error 2 4 BCC error Data error 8 Time out error - 56 - again through with the CMT EMl-31015D Changing l Bar Code Format With the SL-5900 scale, three kinds of bar code formats are available : Weighing format, and the FIX PRICE format. These formats can be changed freely. .c,.3...,....:,..i:.:,~ ::f&&$ #. :.:.:, ::.. .::,.,. . .. 9: ,;g!$$g .,:::.,“:::::‘:‘.~:::::::::i:j: >..::-::::.:::::.:.:.:.;:... .-Menu format, P ii : .:. : ..:. iu: PmgH:: x: .L I P7 Menu I #. WEIGH BY COUNT RECEIPT (lor C4-36 . -lmode. FIX PRICE I P7 mode. mode. -2- P7 -3- P7 c P7 E - mode. only) 6 IENTE;;lz= P7 1 1-o P7 3 1-o P7 3 l-2 p7 3 3-2 Set Cl. ‘7 I 3-3 Sol CZ-C6. ‘7 I 5-1 ‘7 i 5-l ‘7 I 1-o Switch over_the setting item Skip 00 B NEXT PLU Ihe digit. Sel Pl -P4. ‘7 , I (Select anolher 7 I menu or mode.) - 57 - By Count EMl-31015D NOTES: 1. In this scale, the previously set bar code format is cleared by RAM clear, and can be switched to the following formats. Therefore, it is necessary to set the bar code format again after RAM clear. Bar Code Format by Initialization: 0 Weighing format C2 8 8 C3 C4 C5 C6 PC/D Pl P2 P3 P4 C/D C2 C3 C4 C5 0 0 0 0 C6 C/D C3 C4 C5 C6 PC/D Pl P2 P3 P4 D5 D6 PC/D Pl P2 P3 P4 By Count Format Fix Price Format C2 @ RECEIPT Format (for C4-36 only) 0 2 D2 D3 D4 2. When the ENTER key is depressed, format check is executed, following cases. 0 Price check digit (PC/D) cannot be calculated. 8 Price is not set serially beginning from Pl. 0 The format does not comply with the bar code format. 3. Check digit (C/D) is set automatically 4. The usable keys to set the column are as follows: resulting to the digit-13. El -I i-i-l -I FLAG PLU# UPC# PC/D P&E 1 1 ; ; DEPT# (for C4-36 only) 5. Digits and display of PLU#. PLU# Display 2 2-l 3 4 2-2 5 2-3 - 58 - 6 2-4 2-5 2-6 C/D in an error in the EMl-31015D 6. Digits and display of UPC#. UPC# 2 Display 7. 3 4 3-2 3-l 5 6 3-3 3-5 3-4 Digits and display of price. Price Display 8. 5-1 5-2 5-3 5-4 Digits and display of DEPT#. (for C4-36 only) DEPT# Display 9. 6-l 6-2 6-3 6-4 6-5 Setting items. c 1 2 3 Flag d PLU# -----b UPC# DEPT# b Price - PC/D 6 5 4 - 59 - 3-6 EM1 -3101 1 Menu No. 8 1 a Assigning Speed Keys The SL-5900 has 60 PLU speed keys which are very convenient to call a PLU quickly. -ccrw ‘,‘.:.:.:::~:i::::.:.i:::;:::: :~~~~~I: ::..:I.::: >,.>>,.,._.>:.,/ ..: ... . .. -FRfc.,:;; .i:.. ..,.... i........ .. .::::::::::::::::il:i::3:::i: : ,. ..>:...> .... >. . .. .... ... ...( . . mAd Menu P #. I .: v:‘: f *t . . ‘* p ; .:. ,:... : && 8 P8 P8 Speed key #. 10 (1 - 60) PLW. P8 10 P8 10 ENTER P8 11 P 829 / PROG. (Select NOTE: another menu 8 or mode.) When “0” is set on the speed key, if this speed key is pressed in the REG, MARK DOWN, or REWRAP mode, the scale enters an error mode. - 60 - SD EMl-31015D l Setting Ingredient Ingredient message small signed letter. can be printed on a label in maximum 45 characters per line, up to 6 lines with .?:x:::::::::z$:x:::~:+j.~: ::::::.:.:::::::r:s.:,:r.:.. ,.,.,., :; ~~~~ ~~~~~~ ,‘.,.,.... .. ,,,(,,, ::::::::.:::::j:::::::::;:$ ‘.‘. .V’... ..:.:.....: ._.,.,.:.::::q .... ::::::::~:::::~:i::~:~:::.:::.+~:~, :.:.:...:il...-.. i.. P Menu # 11 PI1 Pll Enter the PLW Pll 1234 Call the next PLW. Pll 1235 Pll 1233 Pll 0 Pll 12 Pll 12 Pll 4 PI1 1234 ;;tl,“e previous el ENTER Call the Stored Ingredient Message. Set the data on the second line and subsequent. P (Select another menu or mode.) - 63 - EMl-31015D NOTES: 1. ingredient data cannot be saved into CMT, PL-3 and RAM card for the TEC SL66. 2. This setting function can be used only after designating the PLU# by initial set g-6, 7 and 8, and selecting RAM capacity by initial set 14-4 and 5 fo secure a memory space. Data may be damaged if the initial set is changed during ingredient setting. Initial Set 14 Initial Set 9 3. When no data is programmed for the PLU, ingredient cannot be set. 4. “PLU NOT FOUND” error occurs when PLU# not registered is entered. 5. The ingredient 6. “MEMORY data. 7. Plural PLUS cannot use same ingredient 8. Any terminal in FUN System can transfer PLU and its ingredient data in pairs to other terminals. to be used for SEND or RECEIVE is cleared when entering this mode. FULL” error occurs when there is no memory space to register ingredient - 62 - data. (PLU and ingredient data are in pairs.) EMl-31015D Issuing l Confirmation Label (for SL-5900-35136 Test Iabels used to confirm that a PLU previously the POS system, can be issued. only) present to this scale is present in the master file of .... r;: +,.::j L: 2.:: Menu b. f-q-q-q-2 Sel the individual PLU #. Set the block PLU #. (Ex. 820- 829) Set the zone PLU #. (Ex. 100-303) Set the entire PLU # ENTER / L To interrupl issue. label To resumi label issue which has been inlerrupted. To cancel label issue which has been inlernrpted. - ENTER - CLEAR 2 ---+ 4 1 PROG. (Selccl another menu 1 or mode.) - 63 - EMl-31015D 1 Menu No. 13 1 Switching l On-Line/Local (for SL-5900-35/36 only) When the SL-5900-35 is used as a satellite in an on-line system, the “ID No.” and *Transmission Delay Time” must be set by the following procedure. Menu 13 #. P13OF Switch the using mode of the Local * scale. Enter the ID #. (O- 255) On-Line FMCC-3) Local Select the transmission delay time (1 - 9). (Refer to table 2) p13t3 Id p13t3 Id p13t3 tr p13t3 tr 3 p13t3 Id 50 3 (Select NOTE: The TMCC-3 anolher menu 13 or mode.) baud rate can only be 4800 BPS. n Table 2 : Transmission Delay Time Table TR-Time 120 140 5 60 160 80 100 180 - 64 - 50 (ms) EMl-3lOl5D l Setting Grade Line (for SL-5900-36 You can set the maximum it to on the label. only) 49 kinds of grade line (26 character per line), and call one of them to print .............i.l........... y: ‘:::::,:.:.:.~:,~~;,~~~,~:. I’$~~~: ;; ,j3g@g.: ,.’~:.:.;.~:.r .....:.i.,:.‘.: .::::i~.~i:~:i:i:j:::::::: \...s-L~~.--.- Menu P #. PI7 P17 Q Enler the grade line #. (l-49) ENTER P17 Enter the characters. P17 (max. 26 chara.Iline) I I ENTER P17 CII P17 ti PROG. - 66- :. $.: r:,: __-. EMl-31015D 1 Menu No. 1% 1 l Memory Card (for SL-5900-36 only) PLUS are saved, compared, and loaded by using the memory card (128KB). Menu #. P P18 Save Compare -2 P18 1 P18 2 Load P18 Data display P18 PI8 =‘18 u NEXT PLU _ A I Format clear -8 O- PLU clear ‘-9 8- ‘18 CLEAR 1 ENTER I =18 80 ?18 98 P18 I SurE 1 P18 u P18 - 66 - n (n = 80 or 98) EMl-31015D NOTES: 1. If the PLU file cannot be saved into one memory card, the program will display the message “INS NAOTHER CARD”. Then, replace the memory card and press the ENTER key so that the following data will be saved. For cancellation, press the CLEAR key. 2. Comparision of the PLUS stored in the memory card and those in the scale terminates normally even if other PLUS are left in the scale memory. Evern if the PLU data of the scale ends, a data error results if other data is left in the memory card. 3. Of the PLUS stored in the memory card in loading the PLU file, the data found in the scale memory is overwritten and the data not found in it is added. - 67 - EMl-31015D l Error Information irror Information ) The memory card is full (nothing has been saved). 0 Format error (no PLU file is found in the memory card.) o Data Error 0 F;yLORY CARD -_-. o ---~.. .FORMAT ERROR -__-.--~-DATA ERROR No. of logos mismatched DIFF. # OF DATA - 66 - EMl-31015D l Transmitting PLU File or Unit Price (FUN System) Any terminal in the FUN system can transfer the data of its PLU file or unit price to other terminals verification. In this case, the destination terminal (s) must be set in the REG mode. for .,./ -. -::::::.:i::.::..:~~~.~: . ::.‘.j:~~:::‘::.:.::.:~:.,.:.:. ...>>..:.:::::.::: :.:.:.:.:... .:.:.:.::.~.:.:. ,. y...... .:.:::;,:,:.:.:.:.:.:.:.:.%:,:., j ~~~~~ :.......~.N!g.;. j F%tict f.:&$jg:;. ., .,. : ...:,:::l:.:i:~.j:‘si:~~ :i.::.::::.:.:.:.:.:...:.~:.: ......I..I............. ...\. Menu P #. 2 P20 P20 1 unit price. P20 2 Transmit PLU Transmit file. Verify PLU file. P20 11 Verity unit price. P20 1 2 n P20 pon P20 P (Select another menu 20 or mode.) NOTES: 1. When the PLU data has been changed using menu #l and the data is to be transferred to other terminals through the operating procedure described above, the PLU file transfer is performed. 2. When the unit price has been changed using menu #Cl and the unit price is to be transferred to other terminals through the operating procedure described above, the unit price transfer is performed. 3. While receiving data, the terminals stop all operations. - 69 . EMl-31015D l Setting Clerk Name (for SL-5900-36 only) ,, :y$@ ,; :‘::::::,I:‘:;:::::::::::: . 2:. ..\ ::..:.c .._ . . . . . . .._ :,:.. ,. . . . . . .A.. ..:.. .@3~.@ ., ~.,., ,.::, _.. Menu i P #. P21 No. of Clerks Max. 6 -1 P21 -2 I -3 I P21 -4 I P21 -5 I P21 P21 P21 No. 01 Characters Max. 12 v ENTER P21 P21 - 70 - .. . . . . 1. . . . . . . . ..A.... EMl-31015D n Error Code during Transmitting TOTAL PRICE Error Code 1-7 8 1 All errors occur in the receiving terminal. key, then attempt to transmit again. Phenomena Hardware error Verify error 2 Character over error BCC error 4 8 Data error Time out error The error mode can be released by depressing - ?l- the CLEAR EMl-31015D l Setting Print Item #I ON/OFF The setting specifies whether each print item on the registered Menu P #. PROG. Packed on date. Sell by dale. Commodity labels is to be printed or not. name. P-+ Address. 4 43 Bar Code. 5 40 P40 00000 P40 00001 P40 00010 P40 00100 P40 01000 I P40 10000 40 P (Select another menu or mode.) - [Position of Print item] Commodity Name area I Bar Code Unit Price Packed on dale ‘Sell by date or Quanlity . $ symbol Weight or Quanlily Total Address area - 72 - Price EMI -31015D l Setting Print Item #2 ON/OFF The setting specifies whether each print item on the registered Menu P #. 00000 P41 00001 2 P41 00010 3 P4 00100 4 P4 01000 P41 10000 P-+ Weight. price. $ symbol. 41 P41 Unit price. Total labels is to be printed or not. -=: Quantity. P (Select anolher menu or mode.) - 73 - 41 EM1 -310150 17. ERROR MESSAGE Take the following action if an error message display (option) with the buzzer sounding. TABLE has appeared on the total price display and/or message he CLEAR key, and set the . . . . . . . . . . . . . . . . . .. . . .. .. .. . . . . . . . . . LABEL END . . . . . . . . . .. . . . . .. . . . . . . . . . . . . . . . . . . . PRT FAILURE MEMORY CHARACT. FULL OVERRUN TOTALS OVERFLOW PLU DATA ERROR LABEL OVERRUN .~. .----___ e CLEAR key, and set after = pt is made to set more __~__Total memory has overflowed Depress the CLEAR key, and turn the Then sum at the time of issuing a label. control lock at “Z” position. up the overflowing memory. I ~~~~-~~ - ..~..... Error of PLU data. Depress the CLEAR key, and check the PLU data. Label overrun. Depress the CLEAR key and the FEED key. Then remove the label. OP The RAM quantity initial set ,I. . . . . . . . . . .. . . .. . . . . . . . . . . .. . . . . . ., data is different from the OPTION RAM ERROR actual number of RAMS. . - 74 ” Call for service. EM1 -31015D H CMT/FUN BAD TAPE OR CMT Time out error. Depress the CLEAR key. Bad tape or CMT loader. Depress the CLEAR key, and change the (Hardware error) tape or CMT loader. 18. BEFORE YOU CALL FOR SERVICE It is our primary concern to give you full satisfaction and better service. If, however, any problem arises in connection with the operation of this scale, please check the following points before calling for service: A) Is the power plug fully plugged into an AC outlet? B) Is the power turned ON? C) Is AC power being properly supplied to the outlet? (Check it using another electric appliance.) D) Check the circuit breaker. E) Has there been a power failure of any sort? F) Has the operation been carried out in the correct order? This scale has been manufactured under strict quality control. If you have any trouble, however, DO NOT ATTEMPT TO FIX IT BY YOURSELF. Pull the power plug out of the outlet, and contact your TEC representative. NOTE: The specifications are subject to change without notice. - 75 - I E PRINTED IN JAPAN