Download Optimus 970 Electronic Keyboard User Manual
Transcript
Operating Instructions Bedienungsanleitung Manuel d’instructions Manuale di istruzioni Manual de Instrucciones In-Dash 7" Wide Color LCD Monitor with RDS Receiver and Changer Control 7-Zoll Breitbild-LCD-Farbmonitor mit RDS-Receiver und Wechslersteuerung für den Einbau in das Armaturenbrett Moniteur à cristaux liquides couleur grand écran de 7,0 pouces avec récepteur RDS et commande de changeur Iintégré en tableau de bord Monitor LCD a schermo ampio di 7" per cruscotto con ricevitore RDS e controllo cambiadischi (AUTORADIO) Monitor de pantalla ancha de LCD en color de 7 pulgadas con receptor RDS y control de cambiador de discos para el tablero de instrumentos CQ-VA707N CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER TV707W VIDEO ASPECT A NAVIGATION MUTE DISC/BAND MODE NAVI ME VOLU AV IN AUDIO TRACK TILT MENU OPEN/CLOSE ENTER PWR IN-DASH 7.0 WIDE COLOR LCD TV CQ-VA707N AM/FM VTR1 VTR2 CH·C EON*PTY*CT TV MUTE LOUD ME VOLU MODE PWR TILT OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Panasonic Please read these instructions carefully before using this product and save this manual for future use. Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach für spätere Nachschlagezwecke sorgfältig auf. Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure. Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri. Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. Contents 2 Page Page Features ............................................................ 4 Precautions ....................................................... 5 ID Code ............................................................. 5 Remote Control Preparation ............................. 6 Names of Controls ............................................. 7 Before Use ......................................................... 11 User Settings ..................................................... 16 Sound Settings .................................................. 28 Screen Adjustment ........................................... 30 Operation: General ............................................ 32 Radio Basics ..................................................... 34 Radio Data System (RDS) ................................ 36 CD Changer Basics ........................................... 44 Auxiliary ............................................................. 48 Installation ......................................................... 50 Electrical Connections ....................................... 55 Troubleshooting ................................................. 62 Maintenance ...................................................... 66 Specifications .................................................... 67 CQ-VA707N E N G L I S H 1 Panasonic welcomes you to their constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family. ❏ Features ¡7-inch wide LCD color display Delivers images of high quality and superb color reproduction. ¡Fully powered display positioning mechanism (except for lateral angle) Positioning of the display unit is fully power driven. This includes extending the unit, raising it to upright position, adjusting its vertical (tilt) angle and moving it to the front and rear. The lateral angle to the right and left can be adjusted manually. ¡Radio tuner [for FM/AM(LW/MW)] and RDS function are integrated. ¡CD Changer control function Allows system expansion by adding an optional CD Changer (CX-DP88N, CX-DP9061EN, etc.). When the unit is connected with a CD text recognizable CD changer (CX-DP9061EN, for example), CD text can appear on the display. ¡ID code setup 4-digit ID code for increased security (The figures 1 to 6 can be used.) ¡The speaker for the car navigation system is integrated in the display unit. We designed a small speaker which is built-in the display unit. This speaker is used only for Panasonic car navigation system (CN-DV2000EN, for example). ¡Rear-view camera automatic selection (Rear-view camera is optional.) When you put a car in reverse, a picture taken by the rear-view camera is displayed on a screen automatically. * An optional TV tuner (CY-TN1500PEN) is required to receive TV broadcast. 4 CQ-VA707N WARNING: TO AVOID THE RISK OF SERIOUS INJURY OR POSSIBLE VIOLATION OF LAWS, DO NOT USE WHERE VISIBLE TO DRIVER FOR ANY PURPOSE OTHER THAN NAVIGATION OR USE WITH REAR VIEW CAMERA. When Driving ¡The driver must not operate the color LCD monitor. Operating the color LCD monitor may lead to distraction and cause an accident. Stop your vehicle in a safe location when operating the unit. ¡The driver must not watch videos while driving. It may lead to distraction and cause an accident. ¡Keep the unit at an appropriate sound level. Driving with the sound at a level that prevents you from hearing sounds outside and around the vehicle may cause an accident. E N G L I S H 2 Precautions Car Washing To avoid electrical shorts which may cause a fire or other damage, do not expose this product to water or excessive moisture. Car Ventilation If your car is parked for several hours in direct sunlight, the temperature inside the car may become very high. It is advisable to drive the car and give the interior a chance to cool down before switching the unit on. Power Supply This product is designed to be used in a car having a 12-volt negative ground battery system. Service This product is made of precision parts. Do not attempt to disassemble or adjust any parts. For repair, please consult your nearest authorized Panasonic Service Center. About Preset Memory The preset memory is cleared to return to the original factory setting when the power connector or battery is disconnected. For Installation ¡Install the monitor in a position that does not obstruct the driver’s vision. ¡Do not install the control unit in the following types of location: A location which is exposed to water, a location where it could be stepped on, or a location which is exposed to hot air such as near a heater duct. ¡Do not install the unit in an area where it would obstruct the operation of an air bag. ¡Ask a trained technician to install the unit. Installation and wiring require training and experience. To be safe, ask the sales outlet where you purchased the unit to perform the installation. When Operating ¡Do not let the unit fall or be strongly impacted since this may cause a malfunction or fire. When Parked ¡Do not watch the monitor with the engine off. It will consume battery power and may prevent the engine from starting. ID Code Prior to operating this unit, it is a advisable to assign your 4-digit ID code for security. (The figures 1 to 6 can be used. The figures 7 to 9 and 0 are not available. Make sure to use four digits for ID code. ID code can not be set with two or three digits.) Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked up so that the thief could not use the stolen unit unless that person knows the code you have set. The ID code operation must be performed only by the person whom the unit belongs to. Generally, it is not necessary to enter the ID code each time when using the unit if it has never been disconnected from the main power supply (car battery). For the ID code setting procedures, see pages 19 to 21. Caution: Record your registered ID code and keep it in a secure location. If you forget it, you will be unable to use the unit. CQ-VA707N 5 Remote Control Preparation E N G L I S H 3 Battery Insertion 1. Open the battery holder cover. Lightly depress the cover and slide it out. i | j i { j { 2. Insert the battery. Insert batteries in the correct direction, making sure that their positive (+) and negative (–) ends match the same symbols in the battery holder. | Slide | i { j { i | j 3. Replace the cover. The cover is fixed in place with a click. Battery Notes ¡Battery type: ¡Battery life: Batteries to be used: Two manganese UM4 dry cells (R03) (do not use alkaline dry cells.) About 5 months under normal conditions of use. (Manganese dry cells at normal temperature) Caution: Improper use of batteries may cause overheating, explosion or ignition, resulting in injury or fire. Battery leakage may cause damage to the unit. ¡Do not disassemble or short the batteries. Do not throw the batteries into a fire. ¡To avoid the risk of an accident, keep the batteries away from children. ¡To store batteries, insulate them with tape or the like. Contact with metallic objects or other batteries can cause ignition or rupture. ¡If the batteries are used in the wrong way, there is the danger of liquid leakage, rupture, injuries, and failure. (Insert batteries correctly with respect to their positive (+) and negative (–) ends.) Caution: When decayed, follow the rules and regulations of your country. 6 CQ-VA707N Names of Controls Warning: For safe driving, the operation is possible only when stopped with the parking brake engaged. “WARNING” will be displayed, if you try to switch to VTR1 or VTR2 mode by pressing the [MODE] button while driving. E N G L I S H 4 Remote Control Unit To use the remote control, direct it at REMOTE (remote control light sensor) on the display unit. (a the next page) There are differences in the control buttons between the remote control and the display unit. If the remote control does not have the button you wish to use, operate it on the display unit. ¡Button not on the remote control.................[TILT] button [}][{](VOLUME) button [MUTE] button Infrared Transmitter Direct it at REMOTE (Remote Control Sensor) on the display unit. [PWR](Power) button * On the display unit, one button covers the ME functions of both PWR and MODE buttons. LU VO PWR MUTE TRACK DISC/BAND []][[](TRACK) button [}][{](DISC/BAND) button ¡DISC }{ button ¡BAND }{ button ENTER [NAVI](NAVIGATION) button [ENTER] button NAVIGATION [MODE] button Numeric button (Remote control unit only) [1](CHz) button [2](CHx) button [3](TITLE) button [4](RANDOM) button [5](SCAN) button [6](REPEAT) button MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY [MENU] button [AF] button [PTY] button OPEN/CLOSE ASPECT A LOC [ ](OPEN/CLOSE) button Car AV [TA] button [A](ASPECT) button [LOC](Local) button Note: If the display unit is in the retracted position, the [MENU], [NAVI](NAVIGATION), and [A](ASPECT) buttons cannot be used. CQ-VA707N 7 Names of Controls (Continued) E N G L I S H Operate the controls on the display unit in the same way as you operate the remote control buttons. 5 ¡Buttons not on the display unit: There are differences in the control buttons between the display unit and the remote control unit. If the display unit does not have the button you wish to use, operate it on the remote control unit. [1](CHz) button [4](RANDOM) button [TA] button [2](CHx) button [3](TITLE) button [5](SCAN) button [6](REPEAT) button [AF] button [PTY] button [LOC] button Display Unit REMOTE (Remote Control Sensor) CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7 inches (18 cm) Wide LCD Display Built-In Speaker (rear) (only for car navigation voice guidance) TV707W VIDEO AV IN AUDIO [ENTER] button ASPECT A NAVIGATION MUTE DISC/BAND TRACK MODE NAVI E UM VOL [A](ASPECT) button [NAVI](NAVIGATION) button MENU [MENU] button TILT OPEN/CLOSE ENTER PWR IN-DASH 7.0 WIDE COLOR LCD TV []][[](TRACK) button [}][{](DISC/BAND) button ¡DISC }{ button ¡BAND }{ button Notes: ¡When the display unit is in the retracted position, the [MENU], [NAVI](NAVIGATION), [A](ASPECT) and [TILT] buttons cannot be used. ¡When power is on, the indicator of the selected mode lights. 8 CQ-VA707N Warning: For safe driving, the operation is possible only when stopped with the parking brake engaged. “WARNING” will be displayed, if you try to switch to VTR1 or VTR2 mode by pressing the [MODE] button while driving. E N G L I S H 6 Display Unit Front Mode Indicator (AM/FM, VTR1, VTR2, CH • C, TV) * CH•C : Changer Control CQ-VA707N AM/FM VTR1 VTR2 CH·C EON*PTY*CT TV [TILT] button MUTE LOUD E UM VOL [}][{](VOLUME) button MODE PWR TILT OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [ ](OPEN/CLOSE) button [MODE](PWR : Power) button * Hold down for more than 2 seconds to turn the power off. [MUTE](LOUD) button * Hold down for more than 2 seconds to turn the LOUD on/off. Rear See pages 55 to 61 about electrical connections. Connect the subconnector (parking brake connection lead, reverse lead, antenna control lead, and illumination lead). (a page 55) Connect the display unit/control unit connecting cord. (a page 55) CQ-VA707N 9 Names of Controls (Continued) E N G L I S H Control Unit Front See pages 55 to 61 about electrical connections. VTR1 In 7 VTR1 right audio input (R) : Red VTR1 left audio input (L) : White FRONT VTR1 video input : Yellow REAR REMOTE Remote terminal for TV tuner (CY-TN1500PEN) Pre-out (Rear) (R): Red (L): White Changer control connector Pre-out (Front) (R): Red (L): White Changer left audio input (L) : White Pre-Out Changer right audio input (R) : Red CD Changer RGB Connector Terminal for connecting to Panasonic car navigation system VIDEO-Out: Yellow For external video monitor VTR2 video input : Yellow VTR2 left audio input (L) : White VTR2 right audio input (R) : Red VTR2 In Rear Radio Antenna Connector Reset Switch 10 CQ-VA707N Display Unit Connector Ground Terminal Power Supply Connector Before Use Turn the key in the ignition until the accessory indicator lights. Warning: Do not insert hands, fingers or foreign objects into the unit while the display is moving. Inserting your hands, fingers or foreign objects into the unit can cause injuries and damage to the unit. E N G L I S H 8 [PWR](Power) Power on [MODE] VO LU Press [PWR](Power) or [MODE] to switch on the power. * When using the display unit, press [MODE](PWR) to switch on the power. ME PWR MUTE [Default : FM mode] TRACK DISC/BAND Power off ENTER Press [PWR] again to switch off the power. Or, press and hold [MODE] for more than 2 seconds to switch off the power. * When using the display unit, press and hold [MODE](PWR) for more than 2 seconds to switch off the power. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY OPEN/CLOSE ASPECT Caution: If your car has no ACC position, be sure to switch this unit off before stopping the engine. LOC Car AV [ ](OPEN/CLOSE) How to Open and Raise the Display Press [ CH·C EON*PTY*CT TV MODE MODE PWR [MODE] TILT OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [ ](OPEN/CLOSE) to draw out and raise the display. The display unit is automatically set at the angle and in the position adjusted before. (a pages 12 and 16) Note: When the display unit is opened or closed, a loud beep sounds three times. ](OPEN/CLOSE) Display Cautions: ¡Mount the unit in a position where it will be free from contact with any obstacle. ¡If the unit stops halfway, press [ ](OPEN/CLOSE) again and draw it all the way in. ¡Do not forcibly move it by hand. ¡Do not enter your finger or hand into moving parts and disc slot. Otherwise, you and the unit may be damaged. Keep babies and children away from the unit. CQ-VA707N 11 Before Use (Continued) E N G L I S H CH·C MODE PWR Vertical Angle (TILT) and ForwardBackward Position (SLIDE) Adjustment EON*PTY*CT TV TILT TILT The angle adjustment is approximate and may deviate slightly from the set value depending on the installation position and other conditions. [Default : TILT 3/SLIDE FRONT] OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 9 [TILT] Cautions: ¡For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle. ¡Do not manually change the position of the unit by force. Tilt 1 2 3 4 5 q After raising the display, press and hold [TILT] on the display unit for more than 1 second to display the monitor position setting menu. approx. 110° approx. 70° w Press [}] or [{] to adjust the tilting angle. Press []] or [[] to move the display to the front or rear position. Tilting angle adjustment (5 levels) Slide Notes: ¡The monitor position setting menu is automatically closed if no operation is performed for about 10 seconds. ¡Vertical angle (TILT) and forward-backward position data are saved in the memory, so when the display unit is drawn out next, it is automatically set at the angle and in the position adjusted before. ¡The display position can also be set on the menu screen. (a page 16) Backward (REAR) Forward (FRONT) FRONT-REAR position Display Unit Lateral Angle Adjustment Hold the display unit by the nonslip part in the upper half of it, and adjust its lateral angle. Non-Slip Part (on the back) VA707W VIDEO AV IN AUDIO MUTE max. 15° MODE VOL UM TILT OPEN/CLOSE E PWR IN-DASH 7.0 WIDE COLOR LCD TV RECEIVER max. 15° (Top view) Lateral angle adjustment Cautions: ¡There is the danger of your fingers being pinched if you hold the unit by the lower part. Hold the unit by the upper half of it, and move it carefully without applying an undue force. ¡After adjusting its angle, also adjust the brightness to make it easy for you to watch. (a page 31) 12 CQ-VA707N Warning: Do not insert hands, fingers or foreign objects into the unit while the display is moving. Inserting your hands, fingers or foreign objects into the unit can cause injuries and damage to the unit. Folding Down the Display Temporarily E N G L I S H 10 Folding down the display unit is convenient for gaining access to the air conditioner controls, for example. Press [TILT] on the display unit to fold down the display unit to 20° from horizontal position. Press [TILT] on the display unit again to raise the display unit. approx. 20° CH·C EON*PTY*CT TV MODE PWR TILT TILT OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [TILT] Caution: Do not place any object on the display unit, or subject it to undue force. [ ](OPEN/CLOSE) Retracting the Display q Hold the display unit by its upper portion (with non-slip finish on the back) and return it to the neutral position. Return to neutral position ME LU VO PWR MUTE TRACK DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY ](OPEN/CLOSE) to retract the display unit. LOC Car AV [ w Press [ OPEN/CLOSE ASPECT ](OPEN/CLOSE) Notes: ¡When the display unit is opened or closed, a loud beep sounds three times. ¡The display unit cannot be retracted if it is not returned to the neutral position. If it is not retracted by pressing the [ ] (OPEN/CLOSE) button, check again that the unit is back in the lateral neutral position. CQ-VA707N 13 Before Use (Continued) E N G L I S H 11 Using the Menu/Menu Control Menu Tree USER (User Settings) TILT/SLIDE Monitor Position - Tilt and Slide (page 16) CLOCK Clock Settting (page 17) NAVI SETUP Car Navigation Set up (page 18) SYSTEM RDS (RDS Settings) SOUND (Sound Settings) SCREEN (Screen Adjustment) 14 CQ-VA707N ID CODE ID Code Setting (pages 19-21) ACC ACC Selection (page 27) INPUT SELECT Input Selection (page 22-26) TA VOLUME RDS Traffic Announcement Volume Settings (page 40) REGION RDS Region Settings (page 38) PTY LANGUAGE RDS Program Type Display Language (page 43) TONE Tone - Bass and Treble Settings (page 28) BAL/FAD Balance and Fader Settings (page 28) LOUD Loudness (page 29) BEEP Operation Beep Sound (page 29) DIMMER Dimmer Setting (page 30) CONTRAST Contrast Adjustment (page 30) BRIGHT Brightness Adjustment (page 31) COLOR Color Adjustment (page 31) TINT Tint Adjustment (page 31) The main menu screen consists of a menu and submenus. Refer to the operation guide shown on the screen. q Press [MENU] to display the main menu. E N G L I S H 12 [}][{], []][[] Menu bar ME LU VO Selected item (cyan colored) PWR MUTE Main Menu Submenu TRACK DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A Operation guide w Press the [}], [{], []] or [[] button to move the cursor. e Press [ENTER] to select an item. The setting/adjusting menu for the selected item is displayed. PTY OPEN/CLOSE ASPECT CQ-VA707N [MENU] LOC REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Note: The RDS menu can be selected only when the radio is in FM mode. Car AV Setting/Adjusting Menu TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI E LUM AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VO PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] Notes: ¡The main menu and the setting/adjusting menu are not displayed when the display unit is in the retracted position. ¡Press [MODE] to close the main menu and the setting/adjusting menu. CQ-VA707N 15 User Settings E N G L I S H Monitor Position (TILT/SLIDE) Adjust the tilt angle and front/rear position of the raised display unit. [Default: TILT 3/SLIDE FRONT] * The monitor position setting menu can also be displayed by pressing the [TILT] button on the front panel of the display unit for more than 1 second. (a page 12) 13 q Press [MENU] to display the menu. Press []] or [[] to select “USER”. Press [{] or [}] to select “TILT/ SLIDE”. [}][{], []][[] ME LU VO PWR MUTE TRACK w Press [ENTER] to set “TILT/SLIDE”. DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY A e TILT: Press [}] or [{] to increase or decrease the tilt angle of the display unit. OPEN/CLOSE ASPECT CQ-VA707N [MENU] LOC REMOTE 1 2 3 4 5 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER approx. 110° Car AV approx. 70° Tilting angle adjustment (5 levels) TV707W VIDEO SPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE SLIDE: Press []] or [[] to move the display to the front or rear position. ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] Note: Position “REAR” and tilt angle “5” cannot be selected at the same time. Forward (FRONT) Backward (REAR) FRONT-REAR position Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 16 CQ-VA707N Clock Setting (CLOCK) • Enable or disable clock the display. • Adjust the time (24-hour system). [Default: DISPLAY OFF/CLOCK MODE RDS/ADJUST 0:00] q Press [MENU] to display the main menu. Press []] or [[] to select “USER”. Press [{] or [}] to select “CLOCK”. E N G L I S H 14 [}][{], []][[] ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER w Press [ENTER] to set “CLOCK”. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY OPEN/CLOSE ASPECT CQ-VA707N [MENU] LOC REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Car AV e Press []], [[], [{] or [}] to move the cursor. Press [ENTER] to set after each setting. • Clock Display Select “DISPLAY”. ON: Clock display is on. OFF: Clock display is off. TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] • Clock Mode Select “CLOCK MODE”. RDS: The clock is automatically adjusted using the RDS clock time service function. (a page 36 about RDS) MANUAL: Adjust the clock manually. Press []] to adjust the hour. Press [[] to adjust the minute. Hold []] or [[] to change numbers rapidly. Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. CQ-VA707N 17 User Settings (Continued) E N G L I S H Navigation Set Up (NAVI SET UP) Navigation volume can be set when a Panasonic car navigation system is connected. This is to set the voice guide volume of the car navigation system. Its volume can be set so that the volume of the unit will be automatically lowered when the voice guide is on (Navi Mute). When navigation input (a page 22) is set to RGB, connect the unit to the navigation mute cord of the car navigation system. [Default: NAVI MUTE 1/NAVI VOLUME 4] 15 q Press [MENU] to display the main menu. Press []] or [[] to select “USER”. Press [{] or [}] to select “NAVI SET UP”. [}][{], []][[] VO LU ME PWR MUTE TRACK DISC/BAND [ENTER] ENTER w Press [ENTER] to set “NAVI SET UP”. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 5 6 4 CQ-VA707N REMOTE TA 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER AF PTY OPEN/CLOSE ASPECT A [MENU] LOC Car AV TV707W VIDEO SPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPE OPEN/CLOSE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] e Press [}], [{], []] or [[] to move the cursor. ¡Navi Mute Level OFF: The volume of the unit remains normal even when the voice guide of the car navigation system is on. * The volume can be adjusted with the VOLUME [}] and [{] buttons. 1: The volume of the unit is lowered to about 1/3 of the full level when the navigation voice guide is on. 2: The volume of the unit is lowered to about 1/10 of the full level when the navigation voice guide is on. 3: The volume of the unit is lowered to zero (no sound) when the navigation voice guide is on. ¡Navigation Volume ]: The volume of the navigation voice guide decreases. [: The volume of the navigation voice guide increases. r Press [ENTER] to complete the navi mute level and the navigation volume level. ¡Navi mute is invalid when navigation input (a page 22) is set to other than RGB, so no item can be selected. ¡There is no navigation voice guide output when the display unit is in the retracted position. Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 18 CQ-VA707N ID Code (ID-CODE) Setting Prior to operating this unit, it is a advisable to assign your 4-digit ID code for security. (The figures 1 to 6 can be used. The figures 7 to 9 and 0 are not available. Make sure to use four digits for ID code. ID code can not be set with two or three digits.) Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked up so that the thief could not use the stolen unit unless that person knows the code you have set. The ID code operation must be performed only by the person whom the unit belongs to. E N G L I S H 16 Generally, it is not necessary to enter the ID code each time when using the unit if it has never been disconnected from the main power supply (car battery). Caution: Record your registered ID code and keep it in a secure location. If you forget it, you will be unable to use the unit. How to enter your ID code (For the first time) [}][{], []][[] q Press [MENU] to display the main menu. Press []] or [[] to select “USER”. Press [}] or [{] to select “SYSTEM” and “ID-CODE”. ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER w Press [ENTER] to set “ID-CODE”. The ID code setting menu appears. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A Note: When you are setting your ID code for the first time, it is not necessary to enter the old ID code. PTY OPEN/CLOSE ASPECT CQ-VA707N [MENU] LOC REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Car AV e Enter an ID code of 4 digits using the buttons [1] to [6]. (Only for remote control) Numeric button TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TILT MENU MENU OPE OPEN/CLOSE ENTER ENTER VOLU PWR [{][}] [MENU] r Enter the new ID code of 4 digits again using the buttons [1] to [6]. (Only for remote control) TRACK MODE A AV IN IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] Caution: Record your registered ID code and keep it in a secure location. [ENTER] CQ-VA707N 19 User Settings (Continued) E N G L I S H How to change your ID code If you wish to change your already set ID code for a new ID code, follow the steps below. q Press [MENU] to display the main menu. Press []] or [[] to select “USER”. Press [}] or [{] to select “SYSTEM” and “ID-CODE”. [}][{], []][[] 17 ME LU VO PWR MUTE w Press [ENTER] to set “ID-CODE”. The ID code setting menu appears. TRACK DISC/BAND [ENTER] ENTER e Enter the present ID code using the buttons [1] to [6]. (Only for remote control) If the wrong ID code is entered, a new ID code cannot be registered. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF r Enter a new ID code of 4 digits using the buttons [1] to [6]. (Only for remote control) PTY OPEN/CLOSE ASPECT A [MENU] LOC Car AV CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER t Enter the new ID code of 4 digits again using the buttons [1] to [6]. (Only for remote control) Numeric button Caution: Record your registered ID code and keep it in a secure location. TV707W VIDEO SPECT NAVIGATION ON NAVI ME AUDIO How to cancel the known ID code MUTE DISC/BAND TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV Note: Should your unit ever require service, cancel your ID-Code before sending for repair. Perform q - e. “INPUT THE NEW ID-CODE” is displayed, but please ignore it. []][[] [ENTER] r Press and hold [ENTER] until display the “RE-INPUT THE NEW ID-CODE”. The ID code canceling procedure is completed. The unit now works like any other radio without an ID-CODE. Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 20 CQ-VA707N E N G L I S H ID Code Input ¡ When removing the unit from the car and mounting it on another car, ¡ When replacing a car battery with a new one, or other cases 18 When the unit is disconnected from the main power supply such as the above cases, follow the procedure below. Note: All settings return to the default setting except ID code. [PWR](Power) [MODE] VO LU q Press [PWR] or [MODE] to switch on the power. * When using the display unit, press [MODE](PWR) to switch on the power. The loud beep sounds for 10 seconds. ME PWR MUTE ](OPEN/CLOSE) to raise the display unit during the loud w Press [ beep is sounding. ] after the loud * The display unit is not raised even if you press [ beep stops. In such a situation, switch off the power and try the procedure again. TRACK DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY OPEN/CLOSE ASPECT A e ID code input screen is displayed. Enter the ID code using the remote control. LOC success ➞ Car AV [ ](OPEN/CLOSE) Numeric button CH·C EON*PTY*CT TV MODE MODE PWR [MODE] TILT OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [ Note: When failing in entering ID code, a screen on the right is displayed, and the unit beeps three times. Enter a correct ID code. In case of failing in entering ID code three times consecutively, the power is turned off. Turn on the power again and enter a correct ID code in this case. ](OPEN/CLOSE) Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. CQ-VA707N 21 User Settings (Continued) E N G L I S H Input Selection (INPUT SELECT) The unit has three connecting terminals: RGB, VTR1 VTR2. A car navigation system, rear-view camera, television tuner, etc. can be connected to these terminals. Use this menu to set the device actually connected to each terminal. [Default : NAVI RGB/CAMERA OFF/TV TUNER OFF/VTR1 PAL/VTR2 PAL] 19 q Press [MENU] to display the main menu. Press []] or [[] to select “USER”. Press [{] to select “INPUT SELECT”. [}][{], []][[] ME LU VO PWR MUTE TRACK w Press [ENTER] to set “INPUT SELECT”. DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY OPEN/CLOSE ASPECT A CQ-VA707N [MENU] LOC REMOTE Car AV 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [MODE] e Press [{], [}], []] or [[] to move the cursor. Press [ENTER] to set after each setting. NAVI: Set the terminal to which a Panasonic car navigation system (CN-DV2000EN, for example) is connected. (It is recommended that a car navigation system be connected to the RGB terminal.) If no car navigation system is connected, select RGB. CAMERA: Set the terminal to which a rear-view camera is connected. If no rear-view camera is connected, select OFF. TV TUNER: Set the terminal to which a TV tuner (CY-TN1500PEN, for example) is connected. If no TV tuner is connected, select OFF. TV707W VIDEO SPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV r If needed, set PAL or NTSC for VTR1 and VTR2. Note: If the terminal is set as a TV tuner, the TV mode is automatically set to PAL, and NTSC is not available. []][[] VTR1 [ENTER] RGB Control Unit (front) 22 CQ-VA707N VTR2 Connection example See pages 55 to 61 about electrical connections for detail. Panasonic Car Navigation System (CN-DV2000EN) DVD output RGB: car navigation E N G L I S H 20 Connect to RGB connector. When using DVD Player of CN-DV2000EN, connect to VTR1. CN-DV2000EN NAVI CAMERA TV TUNER RGB OFF OFF VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 VTR1 VTR1 VTR2 PAL PAL PAL for DVD signal NTSC NTSC CQ-VA707N RGB Note on connecting a car navigation system • RGB connection It is recommended that Panasonic car navigation system be connected to the RGB terminal. If a car navigation system is connected to another than the RGB terminal (VTR1 or VTR2), set the navigation screen to NTSC. To watch a DVD video of the PAL system with the car navigation system, change the setting to PAL on this menu. • RCA cord It is recommended that the VTR output (RCA cord) of a car navigation system be connected to VTR1. If a DVD video disc is inserted in this case, the VTR1 DVD video mode is automatically selected (provided that the video control cord is connected) (B page 57). Other corporations’ car navigation system Connect to VTR1 or VTR2. Other corporations’ car navigation system VTR1 NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 NTSC NTSC VTR2 VTR2 VTR2 Set the connector that is connected to a car navigation. Use the same signal as the car navigation. (ordinary NTSC) VTR1 CQ-VA707N CQ-VA707N VTR2 23 User Settings (Continued) E N G L I S H Rear View Camera Connect to a video input of VTR1 or VTR2. Rear View Camera VTR1 21 NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 Set the connector that connected to a rear view camera. Use the same signal as the rear view camera. (ordinary PAL) NTSC NTSC VTR1 CQ-VA707N VTR2 TV Tuner (CY-TN1500PEN) Connect to VTR1 or VTR2. VTR1 NAVI CAMERA TV TUNER VTR1 VTR2 CY-TN1500PEN RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 Set the connector that is connected to TV tuner. If the terminal is set as a TV tuner, the TV mode is automatically set to PAL, and NTSC is not available. NTSC NTSC REMOTE VTR1 REMOTE CQ-VA707N VTR2 Others equipment such as video camera Connect to VTR1 or VTR2. Example: When connecting a PAL-signal video to VTR1 NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 NTSC NTSC VTR1 CQ-VA707N 24 CQ-VA707N VTR2 Example of connecting to two or more products Panasonic Car Navigation System (CNDV2000EN) and TV Tuner (CY-TN1500 PEN) Car Navigation (CN-DV2000EN) DVD Player (CN-DV2000EN) TV Tuner (CY-TN1500PEN) RGB VTR1 VTR2 DVD output RGB: car navigation E N G L I S H 22 CN-DV2000EN REMOTE Connect car navigation to RGB. NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 No rear view camera VTR1 Connect TV tuner to VTR2. Set PAL used in DVD to VTR1. NTSC NTSC Set PAL used in TV tuner to VTR2. CQ-VA707N VTR2 CY-TN1500PEN Panasonic Car Navigation System (CNDV2000EN), TV Tuner (CY-TN1500PEN) and Rear View Camera (DVD Player of CN-DV2000EN is not used.) CN-DV2000EN Car Navigation (CN-DV2000EN) TV Tuner (CY-TN1500PEN) Rear View Camera RGB VTR1 VTR2 CY-TN1500PEN Connect car navigation to RGB. NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 NTSC NTSC VTR2 VTR2 VTR2 Connect Rear View Camera to VTR2 Connect TV tuner to VTR1. VTR1 Set PAL used in TV tuner to VTR1. Use the same signal as the rear view camera in VTR2. (ordinary PAL) CQ-VA707N VTR2 Video Rear View Camera CQ-VA707N 25 User Settings (Continued) E N G L I S H 23 TV Tuner (CY-TN1500PEN) and Rear View Camera (a car navigation system is not connected.) TV Tuner (CY-TN1500PEN) Rear View Camera VTR1 VTR2 When not connecting a car navigation system, select RGB. NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 VTR1 Connect Rear View Camera to VTR2. Connect TV tuner to VTR1. NTSC NTSC CY-TN1500PEN CQ-VA707N VTR2 Video Set PAL used in TV tuner to VTR1. Use the same signal as the rear view camera in VTR2. (ordinary PAL) Rear View Camera Other corporations’ car navigation system and TV Tuner (CY-TN1500PEN) Car Navigation TV Tuner (CY-TN1500PEN) VTR1 VTR2 RCA Car Navigation Connect car navigation system to VTR1. NAVI CAMERA TV TUNER VTR1 VTR2 RGB OFF OFF PAL PAL VTR1 VTR1 VTR1 VTR2 VTR2 VTR2 NTSC NTSC Rear view camera is not connected. VTR1 REMOTE Connect TV tuner to VTR2. Use the same signal as the car navigation system in VTR1. (ordinary NTSC) CQ-VA707N VTR2 Set PAL used in TV tuner to VTR2. CY-TN1500PEN REMOTE Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 26 CQ-VA707N ACC Selection (ACC) If your car has an ACC position, turn the switch to ACC. Otherwise, turn it to OFF. When ACC ON is set, the unit is turned off automatically after stopping the engine. If your car is not equipped with ACC, be sure to turn off the unit before stopping the engine. Otherwise, the unit keeps consuming the power. Consequently, the battery goes dead. [Default: ACC OFF] E N G L I S H 24 Caution: If your car has no ACC, be sure to use a default, ACC OFF. q Press [MENU] to display the main menu. Press []] or [[] to select “USER”. Press [{] or [}] to select “SYSTEM” and “ACC”. [}][{], []][[] ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF ASPECT CQ-VA707N A REMOTE [MENU] w Press [ENTER] to switch the ACC Selection as follows. ACC ON ........... ACC provided PTY OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER LOC ACC OFF .......... ACC not provided Car AV Caution: If your car has no ACC, be sure to switch this unit off before stopping the engine. TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI E LUM AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VO PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] Merits when ACC is activated: ¡The unit is turned off automatically after stopping the engine. ¡The [MODE] button on the front of the display unit remains lit even when power is off. ¡Even if the power is off, the display unit can be tilted by pressing [TILT] button. [ENTER] Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. CQ-VA707N 27 Sound Settings E N G L I S H Tone - Bass/Treble Emphasize or de-emphasize bass/treble level. [Default: 0 dB, adjustment range: –12 dB to +12 dB] 25 q Press [MENU] to display the main menu. Press []] or [[] to select “SOUND”. Press [{] or [}] to select “TONE”. [}][{], []][[] ME LU VO PWR w Press [ENTER] to set “TONE”. MUTE TRACK e Press [{] or [}] to select “BASS” or “TREBLE”. Press []] or [[] to decrease or increase the level. DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF Balance/Fader LOC REMOTE Car AV CQ-VA707N PTY OPEN/CLOSE ASPECT A [MENU] 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER q Press [MENU] to display the main menu. Press []] or [[] to select “SOUND”. Press [{] or [}] to select “BAL/FAD”. [MODE] TV707W VIDEO SPECT NAVIGATION ON NAVI ME AV IN AUDIO w Press [ENTER] to set “BAL/FAD”. MUTE DISC/BAND TRACK MODE A Adjust the sound volume between the right and left speakers (BALANCE) and the front and rear speakers (FADER). [Default: Center position] TILT MENU MENU OPE OPEN/CLOSE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] e Press [}] or [{] to select BALANCE or FADER. ¡ Press []] or [[] to shift the sound volume to the left or right speakers when selecting BALANCE (L – R). ¡Press []] or [[] to shift the sound volume to the front or rear speakers when selecting FADER (FRONT – REAR). Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 28 CQ-VA707N Loudness [}][{], []][[] Enhance treble and bass tones when listening at low or medium volume. [Default: ON] ME LU VO MUTE TRACK DISC/BAND [ENTER] ENTER 26 q Press [MENU] to display the main menu. Press []] or [[] to select “SOUND”. Press [{] or [}] to select “LOUD”. PWR E N G L I S H NAVIGATION CQ-VA707N MODE NAVI MENU CHz CHx TITLE [MENU] 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY ASPECT REMOTE A w Press [ENTER] to switch the loudness as follows. LOUD ON 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER OPEN/CLOSE LOC LOUD OFF Note: The loudness setting can be switched between ON and OFF by pressing and holding [MUTE](LOUD) on the main unit for more than 2 seconds. Car AV Beep Enable or disable the beep of button operations. [Default: ON] TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] IN-DASH 7.0 WIDE COLOR LC LCD TV q Press [MENU] to display the main menu. Press []] or [[] to select “SOUND”. Press [{] to select “BEEP”. []][[] [MENU] [ENTER] w Press [ENTER] to switch the beep of button operations as follows. CQ-VA707N AM/FM VTR1 BEEP ON MUTE LOUD E UM VOL Note: When the display unit is opened or closed, a loud beep sounds three times. However, this loud beep has nothing to do with BEEP ON/OFF. Accordingly, the loud beep sounds even if BEEP OFF has been set. MODE PWR [MUTE](LOUD) BEEP OFF TILT OPEN/CLOSE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. CQ-VA707N 29 Screen Adjustment E N G L I S H Dimmer Adjust the brightness of the backlight. 27 q Press [MENU] to display the main menu. Press []] or [[] to select “SCREEN”. Press [}] to select “DIMMER”. w Press [ENTER] to set “DIMMER”. e Press [}], [{], []] or [[] to move the cursor. Press [ENTER] to set after each setting. DAY: With the side lights off NIGHT: With the side lights on [: To increase light intensity ]: To decrease light intensity [}][{], []][[] ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A [MENU] 1 2 Darker PTY 3 4 Brighter OPEN/CLOSE ASPECT CQ-VA707N [Default: DAY 4 NIGHT 1] LOC REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Car AV Contrast Adjust the image contrast. [Default: 0, adjustment range: –15 to +15] TV707W VIDEO SPECT NAVIGATION ON MUTE DISC/BAND NAVI E AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER M VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] q Press [MENU] to display the main menu. Press []] or [[] to select “SCREEN”. Press [{] or [}] to select “CONTRAST”. w Press [ENTER] to set “CONTRAST”. e Press []] or [[] to increase or decrease the contrast between black and white. Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 30 CQ-VA707N Brightness Adjust the image brightness. [Default: 0, adjustment range: –15 to +15] q Press [MENU] to display the main menu. Press []] or [[] to select “SCREEN”. Press [{] or [}] to select “BRIGHT”. w Press [ENTER] to set “BRIGHT”. e Press []] or [[] to darken or lighten the display. [}][{], []][[] E N G L I S H 28 ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER Color NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY LOC REMOTE Car AV CQ-VA707N Adjust the image color depth. [Default: 0, adjustment range: –15 to +15] OPEN/CLOSE ASPECT A [MENU] 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER q Press [MENU] to display the main menu. Press []] or [[] to select “SCREEN”. Press [{] or [}] to select “COLOR”. w Press [ENTER] to set “COLOR”. e Press []] or [[] to lighten or deepen the depth of color on the display. Tint Adjust the image color tone or tint. [Default: 0, adjustment range: –15 to +15] TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] [MENU] Note: Tint cannot be set on the PAL setting screen. IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] q Press [MENU] to display the main menu. Press []] or [[] to select “SCREEN”. Press [{] to select “TINT”. w Press [ENTER] to set “TINT”. e Press []] or [[] to emphasize red or green in the color image. Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. CQ-VA707N 31 Operation: General E N G L I S H Volume Press [}] or [{] to increase or decrease the volume. [}][{](VOLUME) Volume Level 0 to 40 29 ME LU VO Press and hold [}] or [{] for more than 2 seconds to sequentially change the numeric levels on the display. PWR MUTE TRACK * The volume adjusted in each mode is stored in the memory, and changes each time the mode is changed. (Intelligent volume function) DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE Note: Adjust the volume while the volume indicator appears on the display. 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY Mute OPEN/CLOSE ASPECT A LOC ¡Press [MUTE] to mute the sound completely. Car AV [MUTE] [MODE] Changing the Operation Mode CQ-VA707N AM/FM VTR1 Press [MODE] to change the operation mode as follows. MUTE LOUD MODE E UM VOL PWR VTR2 OPEN/CLOSE VTR1 [MUTE] CH·C EO TV CH• C (Changer Control) Mode Indicator MUTE MODE MODE PWR TILT OPEN/CLOSE OPEN/ 7.0'' WIDE COLOR LCD MONITOR WITH R RECEIVER [MODE] 32 TILT 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER FM/AM(LW/MW) Volume TR1 ¡Press [MUTE] again to cancel. CQ-VA707N VTR2 [NAVI](NAVIGATION) ME LU VO PWR MUTE TRACK Notes: ¡In VTR1 mode, the external device connected to VTR1-IN on the front of the control unit outputs its video and audio signals. (a page 48) ¡In VTR2 mode, the external device connected to VTR2-IN on the front of the control unit outputs its video and audio signals. (a page 48) ¡CH• C (changer control) mode is not available if no changer is connected. ¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is. ¡The mode can be changed even when the display unit is in the retracted position. E N G L I S H 30 DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY Displaying the Car Navigation Screen A Panasonic car navigation system must be connected. This function allows a parallel operation. While you follow the Navigation Screen, you can listen to radio/CD changer/VTR1/VTR2 mode in background. ¡Press [NAVI](NAVIGATION) to change to the car navigation mode. ¡Press [NAVI](NAVIGATION) again to cancel. OPEN/CLOSE ASPECT A LOC Car AV CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Caution: When a car navigation system is connected to this unit, the correct navigation input setting is necessary. (a page 22) [MODE] Notes: ¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is. ¡The volume of the voice guidance from the car navigation system and the volume of the main unit (radio/CD changer/VTR1/VTR2) can be set. (a page 18) TV707W VIDEO ASPECT NAVIGATION MUTE DISC/BAND DISC NAVI NAVI ME OLU V AUDIO TRACK MODE A AV IN MENU TILT OPEN/CLOSE ENTER PWR IN-DASH 7.0 WIDE COLOR LCD TV [NAVI] CQ-VA707N 33 Radio Basics E N G L I S H Radio Mode Press [MODE] to select the FM/AM(LW/MW) mode as follows. FM/AM(LW/MW) VTR1 CH• C (Changer Control) VTR2 []][[](TRACK) 31 [}][{](BAND) Notes: ¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is. ¡The mode can be changed even when the display unit is in the retracted position. ¡The [MODE] button on the front of the display unit remains lit even when the power is off. ME LU VO PWR MUTE TRACK DISC/BAND ENTER Stereo Indicator NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF Frequency [ENTER] Band Press [}](BAND) to switch the FM bands as follows. Press [{](BAND) to switch to the AM(LW/MW) band. PTY [}] OPEN/CLOSE ASPECT A FM1 LOC [}] FM2 [}] Car AV [{] FM3 AM(LW/MW) [}] The stereo indicator lights during reception of a stereo broadcast (only for FM bands). [MODE] Manual Tuning [LOC](Local) Press []] or [[] to move to a lower or higher frequency. CQ-VA707N REMOTE TR1 VTR2 CH·C 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER EO TV MUTE MODE MODE PWR TILT OPEN/CLOSE OPEN/ 7.0'' WIDE COLOR LCD MONITOR WITH R RECEIVER Seek Tuning Press and hold []] or [[] for more than 0.5 seconds, then release. The tuning automatically stops at the next station. [MODE] Monaural Mode Turn Mono on to reduce noise when receiving a stereo broadcast. TV707W VIDEO SPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO Press [ENTER] to switch the MONO mode on or off. TRACK MODE A AV IN TILT MENU OPEN/CLOSE ENTER VOLU PWR [{][}] IN-DASH 7.0 WIDE COLO COLOR LCD TV []] [[] Local Mode (Only for remote control) Receives in strong stations only when performing the seek tuning. Press [LOC] to switch the LOCAL mode on or off. 34 CQ-VA707N Station Preset FM1, FM2, FM3 and AM(LW/MW) can store a maximum of 6 stations each in their preset station memories. Manual Station Preset [}][{](BAND) q Press [}] or [{] to select a desired band. w Use manual or seek tuning to find a station which is to be preset in the memory. e Press and hold one of the preset buttons [1] to [6] until the display [ENTER] blinks. (Only for remote control) ME LU VO PWR TRACK DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE Preset memory table 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF Note: Preset memory or auto preset memory operation deletes the previously set station and presets the newly selected station in its place. PTY OPEN/CLOSE ASPECT A LOC Auto Station Preset Car AV CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [MODE] Numeric button TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AV IN AUDIO TRACK MODE A MENU TILT OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{] [}] 32 Store the currently received station to any of the preset buttons [1] to [6]. (Up to 6 stations can be memorized per band.) (Only for remote control) []][[](TRACK) MUTE E N G L I S H IN-DASH 7.0 WIDE COLOR LC LCD TV Activate the automatic search for the strongest available stations on the presently received band, starting from the lowest frequency. Then store the stations offering the best reception to preset buttons [1] to [6]. (Up to six stations can be memorized per band.) (Only for remote control) Select a band, press and hold [ENTER] for more than 2 seconds. ¡ The 6 strongest available stations will be automatically set in the memory on preset buttons [1] to [6]. (Only for remote control) ¡ Once set, the preset stations are sequentially scanned for 5 seconds each. Note: Preset memory or auto preset memory operation deletes the previously set station and presets the newly selected station in its place. [ENTER] Tuning in to a Preset Station This is how to tune in to a station stored in the memory by Manual or Auto Station Preset. Press any of the buttons [1] to [6] to tune in to the preset station. (Only for remote control) CQ-VA707N 35 Radio Data System (RDS) E N G L I S H Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such data. RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either. This chapter explains the summary and operation regarding RDS. 33 RDS Basics Enhanced Other Networks (EON) The following functions are available when receiving RDS stations. When EON data is received, the EON indicator lights and the TA and AF functions are expanded as follows. ¡Program Service Name Display (PS Display) The name of station is displayed instead of the frequency. Note: It seldom happens that PS display does not show the information correctly because a special font is used. However, this is not due to malfunction. ¡Clock Time Service (CT Service) When receiving an RDS station, the CT (Clock Time) service automatically adjusts the time and date. ¡Alternative Frequency (AF) When reception is poor, an RDS station broadcasting the same program is tuned in automatically. ¡Region Mode Changes the selection range of AF and Best Station Search. (a page 37 for Best Station Search) Traffic Announcements Some RDS FM stations periodically provide traffic information. ¡Traffic Program (TP) Broadcasting of traffic information ¡Traffic Announcements (TA) Radio announcements on traffic conditions Program Type Display ¡Program Type (PTY) RDS FM stations provide a program type identification signal. Example: news, rock, classical music, etc. 36 CQ-VA707N TA : Traffic information from the current and other network stations can be received. AF : The frequency list of preset RDS stations is updated by EON data. EON enables the radio to make fuller use of RDS information. It constantly updates the AF list of preset stations, including the one currently tuned in to. For example, if you preset a station far from home, you will later be able to receive the same station at an alternative frequency, or any other station serving the same program. EON also keeps track of locally available TP stations for quick reception. Emergency Announcement Reception FM mode When an emergency announcement is broadcast, the unit is automatically switched to receiving that broadcast. Other mode If this happens in a mode other than radio mode (CD changer mode, VTR1 mode, VTR2 mode) or in Muting in TA mode, “Alarm!” lights on the display. (a page 39 for Muting in TA mode) Note: When LW/MW mode is activated, an emergency announcement can not be received automatically. Alternative Frequency (AF) When reception is poor, an RDS station broadcasting the same program is tuned in automatically. AF sensitivity can be selected. [Default: AF1] E N G L I S H 34 Press [AF] to change AF mode as follows. (Only for remote control) ME LU VO AF1 Low level AF operating sensitivity AF2 High level AF operating sensitivity PWR MUTE AF off TRACK AF is not active DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 Auto Preset Memory [AF] TA AF OPEN/CLOSE ASPECT A PTY Auto preset memory works only for RDS stations when the AF mode is on. (a page 35 about auto preset memory) LOC Car AV Best Station Search Best Station Search is automatically activated to store the station with the best reception for each preset button. Region Mode Changes the selection range of AF and Best Station Search. (a page 38 about Region on or off) CQ-VA707N 37 Radio Data System (RDS) (Continued) E N G L I S H Region Setting Changes the selection range of AF and Best Station Search. [Default: REGION OFF] 35 q Press [MENU] to display the main menu. Press []] or [[] to select “RDS”. Press [{] or [}] to select “REGION”. [}][{], []][[] ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A w Press [ENTER] to switch the region mode as follows. PTY REGION ON The frequency is changed only for programs within the region. REGION OFF The frequency is changed also for programs outside the region. OPEN/CLOSE ASPECT CQ-VA707N [MENU] LOC REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Car AV TV707W VIDEO SPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 38 CQ-VA707N Traffic Announcement (TA) Some RDS FM stations periodically provide traffic information. Traffic programs can be received automatically. [Default: TA off] E N G L I S H 36 Press [TA] to switch TA mode as follows. (Only for remote control) TA on Receive traffic programs automatically. Following functions are activated. TA off TA is not active. ME LU VO PWR MUTE TRACK DISC/BAND ENTER Seek tuning and auto preset memory Seek tuning and auto preset memory work only for TP stations when TA mode is on. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF LOC Car AV [TA] PTY OPEN/CLOSE ASPECT A TA Volume The TA volume can be adjusted to a level different from the regular volume. (a page 40) Muting in TA Mode To listen only to traffic announcement while muting. qAdjust the TA volume. (a page 40) wSet the regular volume level to 0. (a page 32) TA Stand By Even when the CD changer, the VTR1 or VTR2 mode is selected, FM traffic announcements will interrupt them. (If [TA] is pressed in the CD changer, the VTR1 or VTR2 mode when TA is off, traffic announcements will similarly interrupt.) CQ-VA707N 39 Radio Data System (RDS) (Continued) E N G L I S H TA Volume (TA VOLUME) Set the volume of traffic announcements (TA). [Default: 24] 37 q Press [MENU] to display the main menu. Press []] or [[] to select “RDS”. Press [}] to select “TA VOLUME”. Press [ENTER] to set the TA volume. [}][{], []][[] Volume [}](BAND) VO LU ME PWR MUTE TRACK DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY OPEN/CLOSE ASPECT CQ-VA707N [MENU] REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER A LOC w Press [}](VOLUME) or [{](VOLUME) to increase or decrease the TA volume. Car AV [MODE] [}](BAND) TV707W W VIDEO ASPECT NAVIGATION GATION MUTE DISC/BAND NAVI VI E LUM AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE ENTER ENTER VO PWR [{][}] IN-DASH 7.0 WIDE COLOR LCD TV []][[] [MENU] [ENTER] CQ-VA707N MUTE LOUD MODE MODE E UM VOL Volume PWR TILT OPEN/CLOSE 7.0' 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER [MODE] Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. 40 CQ-VA707N Program Type (PTY) Display RDS FM stations provide a program type identification signal. Example: news, rock, classical music, etc. [Default: PTY off] E N G L I S H 38 Press [PTY] to switch the PTY mode as follows. (Only for remote control) []][[] ME LU VO PTY on PTY display mode The following functions are activated. PTY off PTY is not active. PWR MUTE TRACK DISC/BAND ENTER [ENTER] NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY OPEN/CLOSE ASPECT LOC Note: When PTY is activated, band mode switching can not be performed. If it is necessary to switch the band mode, inactivate PTY. PTY Language PTY display language can be changed. (a page 43) English, German, Spanish, Swedish, Italian, French, Dutch [PTY] PTY Selection q Press [[] to change the program type as follows. ([]] : opposite direction) Car AV SPEECH Current Affairs Education Science Rock Music Serious Classics Finance Religion Leisure & Hobby National Music Documentary → → → → → → → → → → → MUSIC Information Drama Varied Speech Easy Listening Other Music Children's Progs Phone In Jazz Music Oldies Music SPEECH → → → → → → → → → → News Sport Cultures Pop Music Light Classics M Weather & Metr Social Affairs Travel & Touring Country Music Folk Music → → → → → → → → → → w Select a desired program and press and hold [ENTER] for more than 2 seconds. Seek will start to tune in to a station broadcasting the selected program type. CQ-VA707N 41 Radio Data System (RDS) (Continued) E N G L I S H PTY Preset Program types are stored in memory under the preset buttons [1] to [6] shown in the table below. To tune in to the desired program type, press any of the preset buttons [1] to [6]. ME LU VO 39 PWR PTY Search MUTE If a preset call has failed, search the program type station as follows. TRACK DISC/BAND ENTER [ENTER] NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY Preset Change q Select a program type. w Press and hold one of the preset buttons [1] to [6] for more than 2 seconds to store in the memory. PTY OPEN/CLOSE ASPECT q Select a program type by pressing the preset button. The preset program type appears on the display for 5 seconds. w Press the same preset button again (or hold [ENTER] for more than 2 seconds) to tune in to the desired program type station. LOC Car AV Numeric button 42 Preset No. Program Type 1 News Display News Affairs / Info / Educate / Drama / Cultures/ Science Varied / Weather / Finance / Children / Social Religion / Phone In / Travel / Leisure / Document 2 Speech 3 Sport Sport 4 Pop. Music Pop M 5 Classic Music 6 Other Music CQ-VA707N Classics Rock M / Easy M / Light M / Other M / Jazz / Country Nation M / Oldies / Folk M PTY Language Changes the program type (PTY) display language. [Default: English] q Press [MENU] to display the main menu. Press []] or [[] to select “RDS”. Press [{] or [}] to select “PTY LANGUAGE”. [}][{], []][[] E N G L I S H 40 ME LU VO PWR MUTE TRACK DISC/BAND [ENTER] ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY OPEN/CLOSE ASPECT CQ-VA707N w Press []], [[], [{] or [}] to select the language. [MENU] LOC REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Car AV e Press [ENTER] to set the PTY language. Note: Some languages are not available in certain channels. TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AUDIO TRACK MODE A AV IN TILT MENU MENU OPEN/CLOSE OPE ENTER ENTER VOLU PWR [{][}] [MENU] IN-DASH 7.0 WIDE COLOR LC LCD TV []][[] [ENTER] Notes: ¡Press [MODE] to close the main menu and the setting/adjusting menu. ¡Press [MENU] in the setting/adjusting menu to return to the main menu mode. ¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds. CQ-VA707N 43 CD Changer Basics E N G L I S H ¡An optional changer (CX-DP88N, for example) must be connected. ¡Use of the optional Dual CD Changer Control Unit (CA-CD55EN) allows you to connect two CD changers (dual changers). (a page 60) ¡When the unit is connected with a CD text recognizable CD changer (CX-DP9061EN, for example), CD text can appear on the display. 41 Starting the CD Changer Once the CD changer has been connected, press [MODE] to change to the CD changer mode as follows. FM/AM(LW/MW) VTR1 CH• C (Changer Control) VTR2 ME LU VO PWR MUTE TRACK DISC/BAND Notes: Disc Number Track Number ¡The CH • C mode is not available if no changer is connected. ¡If no disc is in the magazine, “NO DISC” appears. ¡If the magazine is inserted while power is on, the CH• C mode is automatically selected to start playing. ¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is. ¡The mode can be changed even when the display unit is in the retracted position. ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY OPEN/CLOSE ASPECT A LOC Car AV [MODE] TR1 VTR2 [3](TITLE) CH·C EO TV Title Display Track title or disc title appears on the display only when the unit is connected to a CD changer that can recognize CD text (CXDP9061EN, for example). MUTE MODE MODE PWR TILT OPEN/CLOSE OPEN/ 7.0'' WIDE COLOR LCD MONITOR WITH R RECEIVER Press [3](TITLE) to switch the display between disc title and track title. (Only for remote control) [MODE] Notes: ¡“NO TITLE” appears on the display if a disc, which does not support the text display, has been loaded. ¡Up to 12 characters can be displayed at a time. ¡If the text has more than 12 characters, it is shown with up to 48 characters just once by scrolling, then the first 12 characters are kept displayed. 44 CQ-VA707N Disc Selection Press [{](DISC) or [}](DISC) to select a disc in descending or ascending order. [}][{](DISC) []][[](TRACK) Disc number Track number E N G L I S H 42 ME LU VO PWR MUTE TRACK DISC/BAND Track Selection ENTER ¡Press [[](TRACK) to advance to the next track. ¡Press []](TRACK) to start play from the beginning of the track now playing. ¡Press [[](TRACK) or []](TRACK) repeatedly to skip the desired number of tracks. NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A CQ-VA707N PTY Track Search OPEN/CLOSE ASPECT LOC Car AV REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER Track Random (Only for remote control) [4](RANDOM) Play the tracks of all discs in the changer in random order. ¡Press [4](RANDOM). All the available tracks on all discs in the magazine will be played in a random sequence. TV707W VIDEO ASPECT NAVIGATION ON MUTE DISC/BAND NAVI ME AV IN AUDIO TRACK MODE A ¡Press and hold [[](TRACK) or []](TRACK) for more than 0.5 seconds to advance or reverse through a track. ¡Release [[](TRACK) or []](TRACK) to resume regular CD play from the released position. TILT MENU OPEN/CLOSE OPE ENTER VOLU PWR IN-DASH 7.0 WIDE COLOR LC LCD TV ¡Press [4](RANDOM) again to cancel. [{][}] []] [[] Disc Random (Only for remote control) Play the tracks of the disc you are currently listening to in random order. ¡Press and hold [4](RANDOM) for more than 2 seconds. All the available tracks on the current disc will be played in a random sequence. ¡Press and hold [4](RANDOM) for more than 2 seconds again to cancel. CQ-VA707N 45 CD Changer Basics (Continued) E N G L I S H Track Scan (Only for remote control) Play the first 10 seconds of each track on the disc in sequential order, starting from the track following the one you are currently listening to. ¡Press [5](SCAN). The first 10 seconds of each track on the discs play in sequence. After all tracks are scanned, resume normal play from the start of the original track. 43 ¡Press [5](SCAN) again to cancel. ME LU VO PWR MUTE Disc Scan (Only for remote control) TRACK DISC/BAND ENTER NAVIGATION [6](REPEAT) MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF A PTY ¡Press and hold [5](SCAN) for more than 2 seconds again to cancel. OPEN/CLOSE ASPECT Play the first 10 seconds of the first track on all discs in the changer in sequential order, starting from the disc following the one you are currently listening to. ¡Press and hold [5](SCAN) for more than 2 seconds. The 1st track of all the discs in the magazine is played for 10 seconds each. When all discs are scanned, resume normal play from the start of the original disc. LOC Car AV Track Repeat (Only for remote control) [5](SCAN) Repeat playing the currently selected track. ¡Press [6](REPEAT) to repeat the current selection. ¡Press [6](REPEAT) again to cancel. Disc Repeat (Only for remote control) Repeat playing the currently selected disc. ¡Press and hold [6](REPEAT) for more than 2 seconds to repeat the current disc selection. ¡Press and hold [6](REPEAT) for more than 2 seconds again to cancel. 46 CQ-VA707N Dual CD Changer (Only for remote control) This function lets you control two CD changers through the optional dual CD Changer control unit (CA-CD55EN). Change over between two connected CD changers. [Default: CH-1] [1](CHz) E N G L I S H 44 Press [1](CHz) or [2](CHx) to select CD changer 1 or CD changer 2. (a page 60) (Only for remote control) [2](CHx) CD changer indicator ME LU VO PWR MUTE TRACK DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF PTY OPEN/CLOSE ASPECT A Note: This function is not available when there is no disc in the connected CD changer or when the magazine is not in the changer. LOC Car AV CQ-VA707N 47 Auxiliary E N G L I S H ¡Watching the Image or listening to the sound of a connected external device ¡Connect a mobile video deck, video camera, rear-view camera, or car navigation system, for example. WARNING: For safe driving, the operation is possible only when stopped with the parking brake engaged. “WARNING” will be displayed, if you try to switch to VTR1 or VTR2 mode by pressing the [MODE] button while driving. 45 Notes: ¡If your car navigation system is not connected, be sure to set the NAVI (navigation input) to RGB on the setting/ adjusting menu. (a page 22) ¡If your rear-view camera is not connected, be sure to set the CAMERA to OFF on the setting/adjusting menu. (a page 22) VTR Mode ME LU VO Press [MODE] to change to VTR1 mode or VTR2 mode as follows. PWR MUTE TRACK FM/AM(LW/MW) VTR1 CH• C (Changer Control) VTR2 DISC/BAND ENTER NAVIGATION MODE NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 The image supplied by a connected external device is displayed. At the same time, the VTR1 or VTR2 indicator on the front panel of the display unit lights. Example of VTR1 mode VTR1-IN TA AF PTY R L VIDEO OPEN/CLOSE ASPECT A LOC Car AV Control Unit (Front) R L VIDEO VTR2-IN [MODE] TR1 VTR2 CH·C EO TV MUTE MODE MODE PWR TILT OPEN/CLOSE OPEN/ 7.0'' WIDE COLOR LCD MONITOR WITH R RECEIVER [MODE] ALARM indicator Emergency Announcement When an emergency announcement is received in VTR mode, “ALARM!” lights and that announcement can be heard. Notes: ¡In VTR1 mode, the video and audio from the external device connected to VTR1-IN are selected. ¡In VTR2 mode, the video and audio from the external device connected to VTR2-IN are selected. ¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is. (a page 33) ¡The mode can be changed even when the display unit is in the retracted position. 48 CQ-VA707N Aspect Ratio (for VTR Mode) Press [A](ASPECT) to change the aspect ratio as follows. Normal ME LU VO ¡The conventional TV image has a 4:3 ratio of horizontal to vertical. ¡In this case, a blank area remains on the right and left sides of the display. PWR MUTE TRACK DISC/BAND ENTER NAVI MENU CHz CHx TITLE 1 2 3 RANDOM SCAN REPEAT 4 5 6 TA AF ¡The screen is extended horizontally as a whole to the aspect ratio of 16 to 9. ¡The extension ratio is the same at any point of the screen. PTY OPEN/CLOSE A 46 Full NAVIGATION MODE ASPECT E N G L I S H LOC Zoom Car AV CQ-VA707N REMOTE 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER ¡The screen is fully extended at the normal aspect ratio of 4 to 3. ¡The top and bottom of the screen are slightly cut. [A](ASPECT) Just TV707W VIDEO ASPECT NAVIGATION MUTE DISC/BAND DISC V NAVI ME OLU AUDIO TRACK MODE A AV IN MENU TILT ¡The screen is extended horizontally to the aspect ratio of 16 to 9. ¡The extension ratio increases toward the right and left ends of the screen. OPEN/CLOSE ENTER PWR IN-DASH 7.0 WIDE COLOR LCD TV Aspect Notes: ¡The zoom and just screens do not apply to car navigation images. ¡When the rear-view camera is in operation with the gear shift in the reverse (R) position, the image is shown on the full screen only. Caution: This is to remind you that compression or extension of the screen using the aspect ratio (screen mode) changing function of this product for commercial purposes or viewing/listening by the public could infringe on the rights of the author protected by the copyright laws. CQ-VA707N 49 Installation E N G L I S H 47 Preparation ¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers. ¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries. ¡Before installation, check the radio operation with antenna and speakers. ¡Disconnect the cable from the negative (–) battery terminal (see caution below). ¡The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. 30° or less Caution: Do not disconnect the battery terminals of a car with trip or navigational computer since all user settings stored in memory will be lost. Instead take extra care with installing the unit to prevent shorts. Dashboard Installation Installation Opening The unit can be installed in any dashboard having an opening as shown at right. The dashboard should be 4.5 mm - 6 mm thick in order to be able to support the unit. 53 mm 182 mm ❏ Transportation bracket removal Be sure to remove the transportation brackets before use (installation). Use screws (5 mmφ x 6 mm) with washers for installation. Be careful not to lose these screws. Binding-Head Screws (5 mmφ x 6 mm) Transportation Bracket Display Unit Transportation Bracket Binding-Head Screws (5 mmφ x 6 mm) 50 CQ-VA707N Installation Precautions This product should be installed by a professional installer, if possible. In case of difficulty, please consult your nearest authorized Panasonic Service Center. 1. This system is to be used only in a 12-volt, DC battery system (car) with negative ground. 2. Follow the electrical connections carefully (a pages 55 to 61). Failure to do so may result in damage to the unit. E N G L I S H 48 3. Connect the power lead after all other connections are made. 4. Be sure to connect the battery lead (yellow) to the positive terminal (+) of the battery or fuse block (BAT) terminal. 5. Insulate all exposed wires to prevent short circuiting. 6. Secure all loose wires after installing the unit. 7. Please carefully read the operating and installation instructions of the respective equipment before connecting it to this unit. Caution: Please follow the laws and regulations of your province or country for installation of the unit . CQ-VA707N 51 Installation (Continued) E N G L I S H ¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers. ¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries. Installation Procedures 49 1 Insert the Mounting Collar w into the dashboard, and bend the mounting tabs out with a screwdriver. !7 Subconnector Mounting Tabs !8 Display Unit/Control Unit Connection Cord !6 Ground Lead r Mounting Bolt e Mounting Spring 2 Attach the mounting springs e to the display unit. 3 Secure the rear of the unit. i Screw 4 5 52 CQ-VA707N Fix the rear of the unit to the car body by either method (a) or (b) shown at right after fixing Ground Lead !6, Subconnector !7, and Display Unit/Control Unit Connecting Cord !8. Insert Trim Plate q. After installation reconnect the negative (–) battery terminal. ❏ Supplied Hardware Fastening the Mounting Collar The tabs to be bent vary depending on the car. Bend them with a screwdriver to fasten the mounting collar w securely in the dashboard. Dashboard w Mounting Collar No. Item Diagram Qty q Trim Plate 1 w Mounting Collar 1 e Mounting Spring 2 r Mounting Bolt (5 mmφ) 1 t Hex. Nut (5 mmφ) 1 Tapping Screw (5 mmφ x y 16 mm) 1 u Rear Support Strap 1 i Screw (5 mmφ) 2 o Velcro Tape 2 !0 Remote Control Unit 1 !1 Battery (UM4) 2 !2 Power Connector 1 !3 Reverse Extension Cord 1 !4 Clip Connector 1 !5 Wiping Cloth 1 !6 Ground Lead 2 !7 Subconnector 1 Display Unit/Control Unit !8 Connecting Cord 1 E N G L I S H 50 (a) Using the Rear Support Strap u 3 mmφ u Rear Support Strap y Tapping Screw (5 mmφ x 16 mm) Fire wall of car Display Unit r Mounting Bolt (5 mmφ) t Hex Nut (5 mmφ) Display Unit (b) Using the Rubber Cushion (Option) Rubber Cushion (option) r Mounting Bolt (5 mmφ) Display Unit !9 Radio Antenna Extension Cord CQ-VA707N 1 53 Installation (Continued) E N G L I S H 51 ❏ To Remove the Display Unit a) Push the right and left clamp plates outwards, one at a time, and pull the display unit toward yourself. b) After removing the right and left clamp plates, pull the unit with both hands till it comes off. Push here to remove the clamp plates. <Mounting the Control Unit> Mounting Example Stick Velcro tape o on the carpet and mount the control unit on it. Connect car radio antenna cord to the control unit using radio antenna extension cord !9 between them. Car Radio Antenna Cord !9 Radio Antenna Extension Cord Control Unit Note: Some carpet materials may not be suitable for this mounting method. In this case, please contact your nearest Panasonic Service center for service. o Velcro Tape Carpet Rado Antenna Connector Notes: ¡Never mount the control unit in any of the following locations to avoid damage due to overheating: 1. Near the heater port. 2. Places like the dashboard or rear deck, where it may be exposed to direct sunlight. ¡Do not mount the control unit near the door, where it could be exposed to rain. 54 CQ-VA707N Electrical Connections Cautions: ¡To prevent damage to the unit, be sure to follow the connection diagram as follows. ¡Remove about 5 mm of protective covering from the ends of the leads before connecting. ¡Do not insert the power connector into the unit until the wiring is completed. ¡Be sure to insulate any exposed wires to prevent a possible short-circuit from the car chassis. Bundle all cables and keep cable terminals free from touching any metal parts. E N G L I S H 52 Basic System Control Unit (Rear) Radio Antenna Connector !2 Power Connector Dual CD Changer Control Lead (Brown w/white stripe) (Left) Front Speaker Cord (Right) (Left) Rear Speaker Cord TWIN CD • C-CONT (White w/black stripe) – (White) + (Gray w/black stripe) – (Gray) + (Green w/black stripe) – (Green) + (Violet w/black stripe) – (Violet) + (Right) !88 Display Unit/Control Unit Connecting Cord FRONT R Display Unit (Rear) REAR L REAR R Video Control Lead To the Video Control lead of the Panasonic car navigation system (for example, CN-DV2000EN) VIDEO-CONT (Green w/yellow stripe) Navi Mute Lead To the Navi Mute lead of the Panasonic car navigation system (for example, CN-DV2000EN) Battery Lead To the car battery, continuous +12V DC !6 Ground Lead To a clean, bare metallic part of the car chassis FRONT L !66 Ground Lead To a clean, bare metallic part of the car chassis SIDE BRAKE NAVI MUTE (Orange) (Blue w/yellow stripe) BATTERY 10A Side Brake (Parking Brake) Connection Lead Be sure to wire the parking brake for safety and preventing accidents. (a page 61) (Fuse 10A) (Yellow) REVERSE (Violet w/white stripe) Power Lead To ACC power, +12V DC !7 Subconnector ACC (Red) (Resistor 220Ω) Ground Lead To a clean, bare metallic part of the car chassis (Black) External Amplifier Control Power Lead AMP-CONT MAX0.1A TV Control Lead To the power control lead of the Panasonic TV tuner TV-CONT (Blue w/white stripe) Reverse Lead When connecting the rear view camera, use the reverse lead. (a page 61) Antenna Control Lead To the auto antenna control power cord of the car ANT-CONT MAX0.1A (Blue) ILLUMINATION (Orange w/white stripe) Illumination Lead To the power line connected to the side lights of the car (Blue w/red stripe) ❏ Connecting the Power Source Notes: ¡This monitor system is designed only for use with a 12 volt DC motor vehicle. ¡Be sure to fully plug in the connectors. ¡Route the cord to avoid high-temperature spots and secure with clamps and tape. ¡When game devices are connected, the image may be unstable. ¡When removing the DIN plug, be sure to press the clip. CQ-VA707N 55 Electrical Connections (Continued) E N G L I S H Example 1: Advanced System Up-grade Connection with CD Changer (CX-DP9061EN), TV Tuner (CY-TN1500PEN), and Car Navigation (CNDV2000EN) CN-DV2000EN 53 DVD Car Navigation (RGB) (R) (L) (Video) (Yellow) (Video) (White) (Red) (R) (L) RCA Cord RGB Cord (supplied to CN-DV2000EN) CQ-VA707N Control Unit (R) (L) (Video) (L) (R) (L) (Remote) (Video) (RGB) (R)(R) (L) (Video) RCA Cord (L) CY-TN1500PEN TV Tuner (R) (Black) (White) (Red) (R) (L) (Yellow) RCA Cord (supplied to CY-TN1500PEN) (Red)(R) Extension Cord (DIN/BATT/RCA/GND) (Black) (White) (White)(L) CX-DP9061EN (Red) CD Text recognizable CD Changer (Yellow) Remote DIN Cord (Video) (Remote) (Video) (Remote) (Front) (Rear) (Blue w/white stripe) PWR-CONT 56 CQ-VA707N E N G L I S H 54 VIDEO-CONT NAVI MUTE Power Connector (supplied to CN-DV2000EN) !6 Ground Lead (Rear) !2 Power Connector !8 Display Unit/Control Unit Connecting Cord (Orange) NAVI MUTE Navi Mute Lead The volume of the unit is lowered when the navigation voice guide is on. Display Unit (Green w/yellow stripe) VIDEO-CONT !7 Subconnector !6 Ground Lead Video Control Lead When a DVD video disc is inserted into the car navigation system, the DVD video screen is automatically selected, provided that the following conditions are met. ¡The RCA cord of the car navigation system is connected to VTR1. ¡NAVI is set to RGB using INPUT SELECT. ¡The car navigation system is connected to VA707 with both the RGB cord and RCA cord. TV-CONT TV Control Lead To the power control lead of the Panasonic TV tuner CQ-VA707N 57 Electrical Connections (Continued) E N G L I S H 55 Example 2: Advanced System Connection with DVD Player (CX-DV1500PEN), Digital Surround Processor (CY-AC300EX), and Power Amplifiers (CY-M9054EN and CY-M7052EN). CY-AC300 Operating Unit Operating Unit/Main Unit Connecting DIN Cord SUB•W REAR ANALOG-IN Power Supply FRONT DIGITAL-IN (Front) DIGITAL DIGATAL SURROUND PROCESSO R PRO LOGIC CE SOUR AC300 bright super VOL MUTE L SE SO U R C E 1 2 multi-co 3 lay lor disp Speaker Center r for Amplifie Power DIMMER & 30w SPACE DIM POSITION SPC POSI DR COMP 4 CY-AC300 Main Unit (Rear) PWR L L L R R R Power Connector (Black) Ground Lead To a clean, bare metallic part of the car chassis (Red) ACC (or IGN) Power Lead To ACC power, +12 V DC ACC (R) (L) (R) (L) (R) (L) RCA Cord (option) (When a two-way cord is used) RCA Cord (option) Resistor (220Ω) RCA Cord (option) REAR (Yellow) Battery Lead To the car battery, continuous +12 V DC (R) RCA Cord (option) BATTERY 5A Fuse(5A) (L) (R) (White)(L) CY-M7052 (Red)(R) (L) (R) CY-M9054 (Black w/green stripe) CENTER (Black) Center Speaker Cord AMP-CONT MAX 0.1A External Amplifier Control Power Cord (Blue w/white stripe) Amplifier Control Power Lead (Blue w/white stripe) Amplifier Control Power Cord (Blue w/white stripe) (Connect to AMP-CONT) Left Right Left Right Speaker Speaker Speaker Speaker (Rear) (Rear) (Front) (Front) Center Speaker EAB-CF2 Sub-Woofer 58 CQ-VA707N E N G L I S H 56 Notes on handling optical fiber cable • Do not bend the cable sharply. • Do not allow the cable to be damaged by getting it caught in the door, placing a heavy object on it, etc. CX-DV1500 (Rear) AUDIO VIDEO DIGITAL OUT Optical Fiber Cable (CA-LRD60: option) (R) (Red) (L) (Video) (Yellow) (White) (Red) Panasonic RCA Cord (Red) (R) Pre-out (Rear) ACC (or IGN) Power Lead ACC Resistor (1kΩ) When connected to the external amplifier control power lead (AMPCONT) of CY-AC300, instead of connecting to the ACC power source, the power of unit can be linked to that of CY-AC300. (L) (White) (Yellow) FRONT (L) (R) (Front) CQ-VA707N Control Unit Pre-out (Front) Not used !8 Display Unit/ Control Unit Connecting Cord (Rear) CQ-VA707N Display Unit (Rear) !2 Power Connector Video Control Lead Not used VIDEO-CONT Do not connect to the Video Control Lead of CX-DV1500. !6 Ground Lead !77 Subconnector !6 Ground Lead CQ-VA707N 59 Electrical Connections (Continued) E N G L I S H 57 Example 3: Connection with two CD Changers (CX-DP9061EN) You need the optional dual changer control unit (CA-CD55EN). CX-DP9061EN Extension Cord (DIN/BATT/RCA/GND) DIN Cord (White) (L) (White) RCA Cord (Red) (R) (Red) (Yellow) Battery Lead To the car battery, continuous +12V DC (Black) Ground Lead To a clean, bare metallic part of the car chassis (R) (Red) (L) (White) DIN Cord (Supplied to CA-CD55EN) (L) (White) (L) (White) RCA Cord (Supplied to CA-CD55) CD • C-1 (R) (Red) CQ-VA707N Control Unit (Front) (L) (R) CD • C-2 (R) (Red) CA-CD55EN (Rear) TWIN TWIN CD • C-CONT CD • C-CONT Dual CD Changer Control Lead (Brown w/white stripe) (Black) Ground Lead To a clean, bare metallic part of the car chassis (Yellow) Battery Lead To the car battery, continuous +12V DC (R) (Red) (L) (White) (Red) (White) RCA Cord DIN Cord CX-DP9061EN 60 CQ-VA707N (R) (Red) (L) (White) E N G L I S H Connecting the Parking Brake Connection Lead Caution: For safety, be sure to ask your nearest professional installer to do this connection. Foot Brake Parking Brake The parking brake switch position varies with the vehicle model. 58 Parking Brake Switch + SIDE BRAKE Parking Brake Connection Lead (Blue w/yellow stripe) – Battery !4Clip Connector Brake Light Vehicle Chassis Side Brake (parking brake) Connection Lead When the parking brake lever is engaged, the unit is grounded by the chassis. q Attach a clip connector !4 to the end of the parking brake connection lead. w The clip connector !4 is connected to the power source side lead of the parking brake lever. Comes up to this point Parking Brake Connection Lead (Blue w/yellow stripe) Power Source Side Lead Connecting the Reverse Cord * In case using an optional rear-view camera, the reverse lead must be connected. ¡Connect the reverse lead (violet w/white stripe) to the positive (+) lead of the reverse lamp (the lamp with a clear lens that lights when the transmission gear is shifted into the reverse position). Check the reverse lamp. Reverse Lamp Clip Connector + - REVERSE !3Reverse Reverse Lead Extension Cord (Violet w/white stripe) * Take it out of the back of the tail lamp mount. Battery Car Body P R N D 2 L Transmission Gear Note: Connect the reverse lead after cutting the terminal at the end. CQ-VA707N 61 Troubleshooting E N G L I S H 59 Maintenance Your product is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents. (a page 66) When Something Doesn’t Work Check the charts for possible causes and solutions to any problem you might be experiencing. Some simple checks or minor adjustments may eliminate the problem. Product Servicing If the suggestions in the charts don’t solve the problem, we recommend that you take it to your nearest authorized Panasonic Service center. The unit should be serviced only by a qualified technician. Fuse Use fuses of the same specified rating (10 A). Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fuse, could cause fire or damage to the unit. If the replacement fuse fails, contact your nearest authorized Panasonic Service Center. Reset Switch Control Unit (Rear) Press the reset switch when any operation buttons do not function. If the unit does not reset even after pressing the switch, contact your nearest Panasonic Service Center for service. Caution: If you press this switch with a sturdy, pointed object, initial setting is restored. However, all memorized settings are cancelled at that time. 62 CQ-VA707N ■ Error Display Message (CD Changer) Display – E1 – – E2 – – E3 – NO DISC NO MAGAZINE Possible Cause Problem Probable Solution Disc dirty or wrong side Next disc is up automatically selected. Disc damaged Eject magazine and check the disc. Receiver fails to operate – Press EJECT button on changer. If trouble persists, press the reset button on changer. Trouble still persists, ask your dealer or nearest service center for repair. – Insert discs into magazine. – Load the changer with the magazine. No disc at all in magazine No magazine in the changer E N G L I S H 60 Note: Display contents and operations vary in part from one changer to another (due to the differences in changer specifications). For details, refer to the manual of the changer you are using. Troubleshooting Tips ■ Power Problem Unit won’t turn on. Possible Cause Probable Solution Dead vehicle battery Ignition not on Charge vehicle battery. Turn ignition to On or Acc. Connections not made correctly Check connections. Bad power battery line connection Connect battery cables to terminals that are always live. Bad accessory line connection Connect accessory power cord with ACC power supply of the car. Bad ground lead connection Connect ground lead to a metallic part of your car. A connecting cord between the display unit and the con- Check the connecting cord between the display unit and the control unit. trol unit is not connected correctly. Fuse burned out Replace it with one of the specified rating. CQ-VA707N 63 Troubleshooting (Continued) E N G L I S H 61 ■ General Problem No sound Probable Solution Possible Cause Volume is too low. Raise volume. Connections not made correctly Check connections. Condensation Leave for some time before use. Volume is too low. Raise navigation volume. Navigation volume set to 0 Set navigation volume to higher than 0. No sound from built-in speakers No sound from left, right, front or rear speaker Left-right, front-rear balance Properly adjust BAL/FAD. is off. Connections not made correctly Check connections. Right and left sounds reversed in stereo Speaker wires are connected incorrectly. Connect speaker wires correctly. Tilt angles and forwardbackward position of display unit cannot be adjusted. Obstacle is in the way. Be careful not to let the cord be caught, and use the display unit in a position free of contact with obstacles. Display unit cannot be retracted. Display unit is not in the neutral position of its lateral angle. Return the display unit to the neutral position of its lateral angle. Possible Cause Probable Solution ■ Display Problem No image Screen too dark Dimmer, contrast, bright, Adjust each of these screen adjustment items color, tint not adjusted prop(dimmer, contrast, bright, color, tint). erly. Screen whitish Tone not good, colors too light ■ 64 Red, blue or green spot This is a characteristic of liquid crystal panels and is not a problem. CQ-VA707N ■ VTR, AV, CAMERA (Video, Video Camera, Rear View Camera) Problem No image from VTR or video camera No image from rear-view camera Possible Cause Probable Solution VTR or video camera is not Connect VTR or video camera correctly, and correctly connected. Correct change the mode to correspond to the device mode is not selected. connected. Rear-view camera is not correctly connected. E N G L I S H 62 Connect rear-view camera correctly. Camera input is not set corSet camera input correctly. rectly. Colors are not correctly reproduced. Display brightness and colors are not correctly adjusted. Adjust display brightness and colors. Rough screen Setting PAL/NTSC is not correct. Set PAL/NTSC correctly. ■ Radio Problem Much noise in FM stereo and monaural broadcasts Presettings lost from memory Switching the band mode can not be performed. Possible Cause Probable Solution Station is too far or signals are too weak. Tune in to a station emitting strong signals. Bad power battery line connection. Connect battery cables to terminals that are always live. Fuse for battery power cables is blown. Replace it with one of the specified rating. PTY is activated. Inactivate PTY and switch the band mode. ■ Remote Control Problem No operation by pressing buttons Possible Cause Probable Solution Battery inserted in wrong direction. Insert a battery correctly. Battery has run down. Replace battery. Remote control not in correct direction. Direct the remote control at the remote control sensor on the display unit. CQ-VA707N 65 Maintenance E N G L I S H 63 To prevent damage to the system exterior Do not apply pesticides, benzine, thinner or other volatile substances to the unit. The cabinet surface primarily consists of plastic materials. Pesticide Do not wipe with benzine, thinner or similar substances because this Alcohol will result in discoloration or removal of the paint. Wax Tape When a cloth with a cleansing chemical is used, follow the caution notes. Thinner Do not leave the unit in contact with rubber or vinyl products for long periods of time. Do not use cleansers which have polishing granules because this could Benzine Adhesive damage the surface of the unit. Tape Clean dirt by wiping lightly with a soft cloth When the unit is dirty, wipe the surface of the display using Wiping Cloth !5, an accessory to the unit. ■ Without a Wiping Cloth When the unit is dirty, wipe with a well-wrung cloth dipped in a liquid dishwashing detergent (neutral) diluted with water and then go over the same surface with a dry cloth. (Since there is the possibility of water drops getting inside of the unit, do not directly apply cleanser to the surface.) Wring well. Go over the same surface with a dry cloth. Wipe lightly. a a ASPECT A NAVIGATION PANASEARCH ASPECT CHANNEL A NAVI MENU ENTER NAVIGATION NAVI PANASEARCH MENU CHANNEL ENTER Kitchen cleanser diluted with water Caution: If water drops or similar wet substances get inside the monitor, it may cause a malfunction. 66 CQ-VA707N Specifications E N G L I S H General Power Supply Current Consumption Audio Input Sensitivity Pre-output Voltage Video input signal Video output signal Dimensions Display Unit Control Unit Weight Display Unit Control Unit : : : : : : 64 : 178 (W) x 50 (H) x 160 (D) mm : 215 (W) x 41 (H) x 150 (D) mm : 1.9 kg : 1.2 kg k Display Unit Liquid Crystal Panel Screen Dimensions Number of Pixels Valid Pixel Ratio Display Method Drive Method Light Source Speaker Sound Output 12 V DC (11 V - 16 V), test voltage 14.4 V negative ground 7 A (at rated VTR operation output) 0.5 Vrms (VTR) 4 V (CD Changer Play Mode; 1 kHz 0 dB) Composite video signal, 1.0 Vp-p (75 Ω) Composite video signal, 1.0 Vp-p (75 Ω) g : : : : : : : : : ) 7 inches wide 156 (W) x 87 (H) x 178 (D) mm 336,960 pixels (234 vertical x 480 horizontal x 3) over 99.99 % Transparent color filter format TFT (Thin Film Transistor) active matrix format Internal light (built-in small fluorescent lamp) 36 mm round speaker (one) 0.7 W Control Unit FM Stereo Radio Frequency Range Usable Sensitivity Stereo Separation : 87.5 – 108 MHz : 8 dB/µV (S/N 30 dB) : 35 dB (at 1 kHz) MW Radio Frequency Range Usable Sensitivity : 531 - 1,602 kHz : 28 dB/µV (S/N 20 dB) LW Radio Frequency Range Usable Sensitivity : 153 - 279 kHz : 35 dB/µV (S/N 20 dB) Note: Specifications and design are subject to modification without notice due to improvements in technology. CQ-VA707N 67 Matsushita Electric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan YEFM283609 B0900-0 Printed in Japan