Siemens Gigaset C300 Specifications Download

Transcript
Gigaset C300-C300A / USA-CAN EN / A31008-M2203-R301-1-3S19 / registr_sett.fm / 25.08.2010
Using multiple handsets
Using multiple handsets
Registering handsets
You can register up to four handsets on your
base station. Each additional handset must
be registered with the base in order for it to
work properly!
Registering the Gigaset handset
with the Gigaset C300/C300A
You must manually register the handset on
both the handset (1) and the base (2).
Once the registration process has been completed successfully, the handset returns to
idle status. The handset's internal number is
shown in the display, e.g., INT 1. If not, repeat
the procedure.
1) On the handset
§Menu§ ¤ Settings ¤ Registration
2) On the base
¤ Press and hold the registration/paging
key on the base (¢ page 5) (approx.
3 sec.).
Deregistering handsets
You can deregister all other registered handsets from each of the registered Gigaset
handsets.
§Menu§ ¤ Settings ¤ Registration
¤ De-register Handset
s
Select the internal subscriber
you wish to deregister and
press §OK§.
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press §OK§.
§Yes§
Press the display key.
¤ Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
press §OK§.
~
If required, enter the system
PIN for the base and press §OK§.
The display shows Handset is registering.
Locating a handset (paging)
2) On the base
¤ Briefly press the registration/paging key
on the base or press the talk key c on
the handset.
¤ Within 60 seconds, press and hold the
registration/paging key on the base
(¢ page 5) (approx. 3 seconds).
You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (¢ page 5).
¤ All handsets will ring simultaneously
(paging), even if the ringtones are deactivated.
Ending paging
Changing the base
Registering other handsets
You can manually register other Gigaset
handsets and handsets for other devices
with GAP functionality as follows.
Version 4, 16.09.2005
1) On the handset
¤ Start to register the handset as
described in its user guide.
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
§Menu§ ¤ Settings ¤ Registration
¤ Select Base
s
Select one of the bases or Best
Base and press §OK§.
41