Download Sharp CD-BA1700H Service manual
Transcript
CD-BP160W/180W/1500W/1700W SERVICE MANUAL No. S4023CDBP1500 CD-BP160W CD-BP160W Mini Component System consisting of CD-BP160W (main unit) and CP-BP160 (speaker system). CD-BP180W CD-BP180W Mini Component System consisting of CD-BP180W (main unit), CP-BP180 (front speaker ) and GBOXS0041AWM1 (surround speaker). Illustration: CD-BP1500W CD-BP1500W CD-BP1500W Mini Component System consisting of CD-BP1500W (main unit) and CP-BP1500 (speaker system). • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used. CD-BP1700W CD-BP1700W Mini Component System consisting of CD-BP1700W (main unit), CP-BP1700 (front speaker ) and GBOXS0041AWM1 (surround speaker). CONTENTS Page SAFETY PRECAUTION FOR SERVICE MANUAL ........................................................................................................... 2 VOLTAGE SELECTION ..................................................................................................................................................... 2 SPECIFICATIONS ............................................................................................................................................................. 3 NAMES OF PARTS ........................................................................................................................................................... 4 OPERATION MANUAL ...................................................................................................................................................... 6 DISASSEMBLY .................................................................................................................................................................. 8 REMOVING AND REINSTALLING THE MAIN PARTS ................................................................................................... 11 ADJUSTMENT ................................................................................................................................................................. 12 BLOCK DIAGRAM ........................................................................................................................................................... 15 SCHEMATIC DIAGRAM ................................................................................................................................................... 18 VOLTAGE ........................................................................................................................................................................ 27 WIRING SIDE OF P.W.BOARD ........................................................................................................................................ 28 NOTES ON SCHEMATIC DIAGRAM .............................................................................................................................. 34 WAVEFORMS OF CD CIRCUIT ...................................................................................................................................... 35 TROUBLESHOOTING ..................................................................................................................................................... 36 FUNCTION TABLE OF IC ................................................................................................................................................ 40 FL DISPLAY ...................................................................................................................................................................... 46 REPLACEMENT PARTS LIST/EXPLODED VIEW SHARP CORPORATION –1– This document has been published to be used for after sales service only. The contents are subject to change without notice. CD-BP160W/180W/1500W/1700W SAFETY PRECAUTION FOR SERVICE MANUAL Precaution to be taken when replacing and servicing the Laser Pickup. The AEL (Accessible Emission Level) of Laser Power Output for this model is specified to be lower than Class I Requirements. However, the following precautions must be observed during servicing to protect your eyes against exposure to the Laser beam. (1) When the cabinet has been removed, the power is turned on without a compact disc, and the Pickup is on a position outer than the lead-in position, the Laser will light for several seconds to detect a disc. Do not look into the Pickup Lens. (2) The Laser Power Output of the Pickup inside the unit and replacement service parts have already been adjusted prior to shipping. (3) No adjustment to the Laser Power should be attempted when replacing or servicing the Pickup. (4) Under no circumstances look directly into the Pickup Lens at any time. (5) CAUTION - Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION Laser Diode Properties Material: GaAIAs Wavelength: 780 nm Emission Duration: continuous Laser Output: max. 0.6 mW ● This Mini Component System is classified as a CLASS 1 LASER product. ● The CLASS 1 LASER PRODUCT label is located on the rear cover. ● Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD. STIRRA EJ IN I STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT. ADVERSEL-USYNLIG LASERSTRALING VED ABNING. SE IKKE IND I STRALEN-HELLER IKKE MED OPTISKE INSTRUMENTER. VARO! AVATTAESSA OLET ALTTIINA NAKYMATON LASERSATEILYLLE. ALA TUIJOTA SATEESEEN ALAKA KATSO SITA OPTISEN LAITTEEN LAPI. VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD. STIRRA EJ IN I STRALEN OCH BETRAKTA EJ STRALEN GENOM OPTISKT INSTRUMENT. ADVERSEL-USYNLIG LASERSTRALING NAR DEKSEL APNES. STIRR IKKE INN I STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER. VOLTAGE SELECTION The voltage selector is located on the AC voltage selector box. If adjustment is necessary, use a screwdriver in order to turn the selector in either direction unitil the correct voltage figure is displayed in the window next the adjustment screw. QACCB0008AW00 92LCORDZ1652A 92LCORD577B QACCE0011AW00 QPLGA0003AWZZ QACCL0002AW00/QACCZ0008AW00 Figure 2 AC POWER SUPPLY CORD AND PLUG ADAPTOR –2– QPLGA0004AWZZ CD-BP160W/180W/1500W/1700W FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. SPECIFICATIONS CD-BP160W/180W/1500W/1700W ● General Power source: Power consumption: Dimensions: Weight: Output terminals: (CD-BP160W/1500W) Output terminals: (CD-BP180W/1700W) Input terminals: AC 110/127/220/230-240 V, 50/60 Hz 100 W Width; 270 mm (10-5/8") Height; 330 mm (13") Depth; 355 mm (14") 6.7 kg (14.7 lbs.) MPO; 160 W (80 W + 80 W) (10 % T.H.D.) RMS; 100 W (50 W + 50 W) (10 % T.H.D.) RMS; 74 W (37 W + 37 W) (0.9 % T.H.D.) Speakers; 6 ohms Headphones; 16-50 ohms (recommended; 32 ohms) Front speakers; 8 ohms Surround speakers; 16 ohms Headphones; 16-50 ohms (recommended; 32 ohms) Video/Auxiliary (audio signal); 500 mV/47 kohms ● Compact disc player section Type: Signal readout: D/A converter: Frequency response: Dynamic range: 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter FM; 88-108 MHz AM; 531-1,602 kHz ● Cassette deck section Frequency response: Signal/noise ratio: Wow and flutter: CP-BP180/1700 3-way type [10 cm (4") woofer × 2 and 5 cm (2") tweeter] Maximum input power: 80 W Rated input power: 40 W Impedance: 8 ohms Dimensions: Width; 231.5 mm (9-1/8") Height; 330 mm (13") (CP-BP180) Depth; 210 mm (8-1/4") Weight: 3.1 kg (6.8 lbs.)/each (CP-BP180) Dimensions: Width; 240 mm (9-7/16") Height; 330 mm (13") (CP-BP1700) Depth; 234 mm (9-9/16") Weight: 3.2 kg (7.0 lbs.)/each (CP-BP1700) Type: 20 - 20,000 Hz 90 dB (1 kHz) ● Tuner section Frequency range: 3-way type [10 cm (4")woofer × 2 and 5 cm (2") tweeter] Maximum input power: 100 W Rated input power: 50 W Impedance: 6 ohms Dimensions: Width; 220 mm (8-11/16") Height; 330 mm (13") (CP-BP160) Depth; 227 mm (8-15/16") Weight: 3.0 kg (6.6 lbs.)/each (CP-BP160) Dimensions: Width; 231.5 mm (9-1/8") Height; 330 mm (13") (CP-BP1500) Depth; 210 mm (8-1/4") Weight: 3.1 kg (6.8 lbs.)/each (CP-BP1500) Type: ● Amplifier section Output power: CP-BP160/1500 GBOXS0041AWM1 Type: 10 cm (4") full-range speaker Maximum input power: 30 W Rated input power: 15 W Impedance: 16 ohms Dimensions: Width; 170 mm (6-3/4") Height; 170 mm (6-3/4") Depth; 88 mm (3-1/2") Weight: 0.5 kg (1.0 lbs.)/each 50-14,000 Hz (Normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.3 % (WRMS) –3– Specifications for this model are subject to change without prior notice. CD-BP160W/180W/1500W/1700W NAMES OF PARTS CD-BP160W/180W/1500W/1700W ■ Front panel 11. (CD) Disc Tray 12. 13. 14. 15. 16. 17. 18. 19. 10. 11. 12. 13. 3 14. 15. 16. 17. Extra Bass Indicator FM Stereo Mode Indicator FM Stereo Indicator (CD) Repeat Indicator (CD) Pause Indicator (CD) Play Indicator (CD) Disc Number Indicators (TAPE 2) Record Indicator (CD/TUNER) Memory Indicator (TAPE) Reverse Mode Indicator (TAPE 2) Direction Indicator (TAPE 1) Play Indicator (TAPE 2) Direction Indicator Sleep Indicator Timer Record Indicator Timer Play Indicator Spectrum Analyzer/Volume Level Indicator 18. 3 3 19. 3 3 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 3 3 37. 38. (CD) Track Down/Review Button (TUNER) Preset Down Button (TAPE 2) Rewind Button (CD) Track Up/Cue Button (TUNER) Preset Up Button (TAPE 2) Fast Forward Button Timer Set Indicator On/Stand-by Button Clock Button Timer/Sleep Button Function Selector Buttons Dimmer Button Volume Up/Down Buttons Equalizer Mode Selector Button Extra Bass/Demo Mode Button (CD) Open/Close Button Headphone Socket Tuning and Time Up/Down Buttons Memory/Set Button (TAPE) Reverse Play Button (CD/TAPE) Stop Button (TAPE 2) Reverse Mode Button (CD) Play/Repeat Button (TAPE 1) Play Button (TAPE 2) Forward Play Button (TAPE 2) Record Pause Button (CD) Disc Skip Button 39. 40. (TAPE 1) Cassette Compartment (TAPE 2) Cassette Compartment 1 2 3 4 5 6 7 8 9 10 11 12 13 1415 16 17 17 17 18 19 20 21 25 22 27 23 28 24 29 26 30 31 32 33 34 35 36 37 38 39 –4– 40 CD-BP160W/180W/1500W/1700W ■ Rear panel 11. 12. 13. 14. 15. 16. 17. 18. 19. AC Voltage Selector AC Power Input Socket FM 75 Ohms Aerial Terminal FM Aerial Earth Terminal AM Loop Aerial Input Socket Span Selector Switch Video/Auxiliary (Audio Signal) Input Sockets Front Speaker Terminals Surround Speaker Terminals (For 180W/1700W Only) 3 4 5 6 7 8 9 1 2 CP-BP160/1700 11. 12. 13. 14. Tweeter Bass Reflex Duct Woofers Speaker Wire 1 3 2 4 CP-BP180/1500 11. 12. 13. 14. Tweeter Bass Reflex Duct Woofers Speaker Wire 1 3 2 4 GBOXS0041AWM1 11. 12. Full-Range Speaker Speaker Wire 1 2 –5– CD-BP160W/180W/1500W/1700W CD-BP160W/180W/1500W/1700W 1 ■ Remote control 11. 12. 13. 14. 15. 16. 17. 3 3 18. 19. 3 3 10. 11. 12. 13. 3 3 14. 15. 16. 17. Remote Control Transmitter LED (CD) Disc Skip Button (CD) Clear Button (CD) Memory Button (CD) Random Button (TAPE 2) Record Pause Button (CD) Track Down/Review Button (TUNER) Preset Down Button (TAPE 2) Fast Wind Button (CD) Pause Button (CD) Track Up/Cue Button (TUNER) Preset Up Button (TAPE 2) Fast Wind Button Equalizer Mode Selector Button (TAPE 2) Reverse Play Button (CD/TAPE) Stop Button (CD) Play/Repeat Button (TAPE 1) Play Button (TAPE 2) Forward Play Button Function Selector Buttons On/Stand-by Button Extra Bass Button Volume Up/Down Buttons 2 3 4 5 6 7 89 10 1112 13 14 15 16 17 OPERATION MANUAL RESETTING THE MICROCOMPUTER X-BASS/ DEMO ON/ STAND-BY Reset the microcomputer under the following conditions: ● To erase all of the stored memory contents (clock and timer settings, and tuner and CD presets). ● If the display is not correct. ● If the operation is not correct. 1 2 Press the ON/STAND-BY button to enter the stand-by mode. Whilst pressing down the button and the X-BASS/DEMO button, hold down the ON/STAND-BY button for at least 1 second. ● "CLEAR AL" will appear. Caution: ● The operation explained above will erase all data stored in memory including clock and timer settings, and tuner and CD presets. ■ Remote control 0.2 m - 6 m (8" - 20') 15 15 Notes concerning use: ● Replace the batteries if the operating distance is reduced or if the operation becomes erratic. ● Periodically clean the transmitter LED on the remote control and the sensor on the main unit with a soft cloth. ● Exposing the sensor on the main unit to strong light may interfere with operation. Change the lighting or the direction of the unit. ● Keep the remote control away from moisture, excessive heat, shock, and vibrations. –6– –7– 9 8 7 6 5 4 3 2 0:00 TUNING/ TIME ( ) CLOCK ON/ STAND-BY AM 0:00 MEMORY/SET (Main unit operation) SETTING THE CLOCK AM 12:00 Press the TUNING/TIME ( or ) button to select the time display mode. "0:00" → The 24-hour display will appear. (0:00 - 23:59) "AM 0:00" → The 12-hour display will appear. (AM 0:00 - PM 11:59) "AM 12:00" → The 12-hour display will appear. (AM 12:00 - PM 11:59) Within 5 seconds, press the MEMORY/SET button. Press the CLOCK button. Press the ON/STAND-BY button to enter the stand-by mode. Press the TUNING/TIME ( or Press the MEMORY/SET button. ) button to adjust the hour. Press the TUNING/TIME ( minutes. or Press the MEMORY/SET button. ) button to adjust the Press the MEMORY/SET button. ② Perform steps 1 - 9 above. COMPUTER". ① Perform steps 1 - 2 in the section "RESETTING THE MICRO- To change the time display mode: ① Press the CLOCK button. ② Within 5 seconds, press the MEMORY/SET button. ③ Perform steps 6 - 9 above. To change the clock time: Note: ● The clock display will flash on and off at the push of the CLOCK button when the AC power supply is restored after a power failure occurs or after the AC power lead is disconnected. If this happens, follow the procedure below to change the clock time. Press the CLOCK button. ● The time display will appear for about 5 seconds. To see the time display: ● The clock starts operating from "0" second. (Seconds are not displayed.) And then the clock display will disappear after a few seconds. 9 ● Press the TUNING/TIME ( or ) button once to advance the time by 1 minute. Hold it down to change the time in 5 minute intervals. ● The hour setting will not advance even if minutes advance from "59" to "00". 7 8 ● Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. ● When the 12-hour display is selected, "AM" will change automatically to "PM". 5 6 ● Note that this can only be set when the unit is first installed or it has been reset. 1 2 3 4 In this example, the clock is set for the 24-hour (0:00) system. 220V (Continued) To an AC socket 2 1 Whilst pressing down the button and the X-BASS/DEMO button, hold down the ON/STAND-BY button for at least 1 second. Set the SPAN SELECTOR switch to "50/9" for 9 kHz AM interval (50 kHz FM interval), and "100/10" for 10 kHz AM interval (100 kHz FM interval). Press the ON/STAND-BY button to enter the stand-by mode. Note for users in Australia and New Zealand: An AC plug adaptor is not supplied if the lead has an Australian Standard plug. ● AC Plug Adaptor In areas (or countries) where an AC socket as shown in illustration ② is used, connect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug adaptor is not included in areas where the AC wall socket and AC power plug can be directly connected (see illustration ①). Notes: ● Plug the AC power lead into a convenient AC socket, after any connections. ● Unplug the AC power lead from the AC socket if the unit will not be in used for a prolonged period of time. ● Never use a power lead other than the one supplied. Use of a power lead other than the one supplied may cause an electric shock or fire. Selector adjustment: Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110V, 127V, 220V or 230V 240V AC). Check the setting of the AC voltage selector located on the rear panel before plugging the unit into an AC socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. ■ Connecting the AC power lead Caution: ● The operation explained above will erase all data stored in memory including clock and timer settings, and tuner and CD presets. ● "CLEAR AL" will appear. 3 1 2 To change the tuning zone: The International Telecommunication Union (ITU) has established that member countries should maintain either a 10 kHz or a 9 kHz interval between broadcasting frequencies of any AM station. The illustration shows the 9 kHz interval zones (regions 1 and 3), and the 10 kHz interval zone (region 2). Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to AM tuning interval (span) of your area. ■ AM/FM interval (span) CD-BP160W/180W/1500W/1700W CD-BP160W/180W/1500W/1700W DISASSEMBLY CD-BP160W/180W/1500W/1700W Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling. 4. Take sufficient care on static electricity of integrated circuits and other circuits when servicing. Front Panel (A1)x2 ø3x12mm Top Cabinet Side Panel (Right) (B1)x2 ø3x10mm (A1)x2 ø3x12mm Side Panel (Left) CD-BP160W/180W/1500W/1700W STEP 1 REMOVAL Top Cabinet PROCEDURE FIGURE 1. Screw ..................... (A1) x4 8-1 2 Side Panel (Left/right) 1. Screw ..................... (B1) x8 8-1 3 CD Player Unit/ CD Tray Cover 1. Turn on the power supply, open the disc tray, take out the CD cover, and close. (Note 1) 2. Screw ..................... (C1) x1 3. Hook ....................... (C2) x3 4. Hook ....................... (C3) x2 5. Socket .................... (C4) x2 8-2 8-2 (B1)x4 ø3x12mm (B1)x2 ø3x10mm Rear Panel Figure 8-1 4 Rear Panel 1. Screw ..................... (D1) x6 5 Main PWB 1. Screw ..................... 2. Socket .................... 3. Flat Cable ............... 4. Lug Wire ................. 5. Flat Wire ................. CD Servo PWB (C4)x2 CD Tray Cover Disc Tray (C2) x3 1 (C3) x1 Pull (E1) x5 8-2,9-2 (E2) x4 9-2 (E3) x1 (E4) x1 (E5) x1 6 Socket PWB 1. Screw ..................... (F1) x1 2. Socket .................... (F2) x1 9-2 7 Front Panel 1. Screw ..................... (G1) x2 9-2 8 Display PWB 1. Screw ..................... (H1) x15 2. Flat Cable ............... (H2) x1 9-3 9 Tape Mechanism 1. Open the cassette holder. 2. Screw...................... (J1) x6 1 2 CD Player Unit Rear Panel (C3)x1 (C1)x1 ø3x10mm 9-3 10 Headphones PWB 1. Screw ..................... (K1) x1 9-3 11 Turntable 1. Hook ....................... (L1) x2 2. Cover ..................... (L2) x1 9-4 12 Disc Tray 1. Turn fully the lock lever in the arrow direction. 2. While holding the lock lever,rotate the cam gear until the cam gear rib engages with the clamp lever. 3. Push the slide holder backward to engage the claw with the groove and remove it in the direction of the arrow. .............. (M1) x6 8-3 (D1)x6 ø3x10mm (E1)x3 ø3x12mm Main PWB Figure 8-2 Lock Lever 9-1 9-5 13 CD Servo PWB (Note 2) 1. Screw ..................... (N1) x1 2. Hook ....................... (N2) x3 3. Socket .................... (N3) x4 9-6 14 CD Mechanism 1. Hook ....................... (P1) x2 2. Hook ....................... (P2) x3 10-1 Figure 8-3 Note 2: 1. After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of the connector to protect the optical pickup from electrostatic damage. Note 3: 1. Be careful not to break the claw of the CD mechanism. 2. When fining back the cam gear assembly, let it lock by front movement. Note 1: How to open the changer manually. (Fig. 8-3) 1. In this state, turn fully the lock lever in the arrow direction through the hole on the loading chassis bottom. 2. While holding the lock lever, rotate the cam gear anticlockwise until the cam gear rib engages with the clamp lever. (Fig. 9-1) 3. After that, push forward the CD slide holder. –8– CD-BP160W/180W/1500W/1700W Clamp Lever (L2) x1 Turntable Cam Gear Rib Disc Tray (L1) x2 Figure 9-1 (E1)x2 ø3x10mm Record/ Playback PWB CD Player Unit Front Panel (E5)x1 Figure 9-4 (E2)x1 Tape Mechanism (E3)x1 (E2)x2 Headphones PWB (M1) x3 (E2)x1 2 (E4)x1 Disc Tray Main PWB Socket PWB (F1)x1 ø3x10mm (G1)x2 ø3x10mm 1 (F2)x1 (M1) x3 Figure 9-2 CD Player Unit (H2)x1 Figure 9-5 Front Panel Display PWB (N1)x1 ø3x8mm (H1)x15 ø3x10mm (N3)x2 CD Servo PWB (N2)x3 Tape Mechanism Open (J1)x6 ø3x10mm Cassette Holder(Lift/Right) Headphones PWB (K1)x1 ø3x10mm (N3)x2 Figure 9-3 Figure 9-6 –9– Disc Tray CD-BP160W/180W/1500W/1700W (P2)x3 CD Mechanism (P1)x1 (P1)x1 Disc Tray Figure 10-1 CP-BP1700/160 STEP CP-BP180/1500 REMOVAL PROCEDURE FIGURE STEP PROCEDURE FIGURE Woofer/ Sub Woofer 1. Front Panel ............ (A1) x1 2. Screw ..................... (A2) x8 10-3 Tweeter 1. Screw ..................... (B1) x2 10-3 1 Woofer/ Sub Woofer 1. Front Panel ............ (A1) x1 2. Screw ..................... (A2) x8 10-2 1 2 Tweeter 1. Screw ..................... (B1) x2 10-2 2 REMOVAL Speaker Box Speaker Box Woofer Woofer (A2)x4 ø4x12mm (A1) x1 (A2)x4 ø4x12mm (A1)x1 (A2)x4 ø4x12mm (A2)x4 ø4x12mm Sub Woofer Sub Woofer (B1)x2 ø3x10mm Driver should be pried away from Speaker Box. (B1)x2 ø3x10mm Tweeter Screw Driver Driver should be pried away from Speaker Box. Figure 10-2 Figure 10-3 – 10 – Tweeter Screw Driver CD-BP160W/180W/1500W/1700W REMOVING AND REINSTALLING THE MAIN PARTS TAPE MECHANISM SECTION TAPE2 Perform steps 1, 2, 3, 4, 5, 7 and 9 of the disassembly method to remove the tape mechanism. Record/Playback Head How to remove the record/playback and erase heads (Tape 2) (See Fig. 11-1) Erase Head 1. Carefully remove the record/playback head and erase head screws (A1) x 2 pcs. How to remove the playback head (Tape 1) (See Fig. 11-2) (A1)x2 Ø2 x 6mm 1. Carefully remove the playback head screws (B1) x 2 pcs. Figure 11-1 How to remove the pinch roller (Tape 1/2) (See Fig. 11-3) TAPE1 Playback Head 1. Carefully bend the pinch roller pawl in the direction of the arrow <A>, and remove the pinch roller (C1) x 1 pc., in the direction of the arrow <B> Note: When installing the pinch roller, pay attention to the spring mounting position. How to remove the belt (Tape 1) (See Fig. 11-4) 1. Remove the main belt (D1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (D2) x 1 pc. (B1)x2 Ø2 x 9mm Figure 11-2 How to remove the belt (Tape 2) (See Fig. 11-4) 1. Remove the main belt (E1) x 1 pc., from the motor side. 2. Remove the FF/REW belt (E2) x 1 pc. How to remove the motor (See Fig. 11-5) 1. Remove the screws (F1) x 2 pcs., to remove the motor. Pinch Roller (C1)x1 Pull TAPE2 Pull <A> Pinch Roller Pawl <B> Figure 11-3 Motor Motor TAPE2 Motor FF/REW Belt (E2)x1 TAPE2 Main Belt (E1)x1 TAPE1 Main Belt (D1)x1 (F1) x2 Ø 2.6 x 5mm TAPE1 Main Belt (E1)x1 FF/REW Belt (D2)x1 Main Belt (D1)x1 Figure 11-5 Figure 11-4 – 11 – CD-BP160W/180W/1500W/1700W CD MECHANISM SECTION Perform steps 1, 2, 3, 11, 12, 13 and 14 of the disassembly method to remove the CD mechanism. How to remove the T/T Up/Down motor (See Fig. 12-1) T/T Up/Down Motor Disc Tray 1. Bend the hooks (A1) x 5 pcs., to remove the T/T Up/Down motor. 2. Remove the drive belt (A2) x 1 pc. (A1)x3 (A1)x2 Pulley Motor Drive Belt (A2) x1 Figure 12-1 How to remove the pickup (See Fig. 12-2) Stop Washer (B1) x2 (B3) x1 ø2.6 x6mm 1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2). 2. Remove the stop washer (B3) x 1 pc., to remove the gear (B4). 3. Remove the pickup. Note After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of connector to protect the optical pickup from electrostatic damage. Pickup Shaft (B2) x1 CD Mechanism Gear (B4) x1 Figure 12-2 ADJUSTMENT • Tape Speed MECHANISM SECTION • Driving Force Check Torque Meter Test Tape Adjusting Point Specified Value MTT-111 Variable Resistor in motor. 3,000 ± 30 Hz Specified Value Play: TW-2111 Normal speed Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Specified Value Tape 1 Play: TW-2111 30 to 80 g. cm Tape 2 TAPE MECHANISM 30 to 80 g.cm Fast forward: TW-2231 — 70 to 180 g.cm Rewind: TW-2231 — 70 to 180 g.cm Motor Variable Resistor in motor Figure 12-3 – 12 – Instrument Connection Speaker terminal (Load resistance: 6 ohms) CD-BP160W/180W/1500W/1700W TUNER SECTION • FM RF Signal generator: 400Hz, 22.5 kHz dev., FM modulated fL: Low-range frequency fH: High-range frequency • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated Test Stage Frequency Test Stage Frequency Frequency Display Frequency Display Setting/ Instrument Adjusting Connection Parts FM Band Coverage — FM RF 98.00 MHz 98.00 MHz (10-30 dB) AM IF 450 kHz 1,602 kHz T351 AM Band Coverage — 531 kHz (fL): T306 *2 1.1 ± 0.1 V 990 kHz (fL): T303 AM Tracking 990 kHz *1. Input: Antenna, *2. Input: Antenna, *1 87.50 MHz *1. Input: Antenna, *2. Input: Antenna, *1 Serring/ Adjusting Point Instrument Connection T301(fL): 3.4 V ± 0.1V *1 L312 *2 Output: TP301 Output: Speaker terminal Output: TP302 Output: TP301 SO302 FM TERMINAL CNP301 AM LOOP ANTENNA MAIN PWB 1 T303 IC301 AM TRACKING fL L312 T302 T306 TP301 FM RF FM IF R382 T301 AM BAND COVERAGE fL FM BAND COVERAGE fL T351 AM IF TP302 R357 Figure 13-1 ADJUSTMENT POINTS CD SECTION CD ERROR CODE DESCRIPTION Error • Adjustment Since this CD system incorporates the following automatic adjustment functions, readjustment is not needed when replacing the pickup. Therefore, different PWBs and pickups can be combined freely. Each time a disc is changed, these adjustments are performed automatically. Therefore, playback of each disc can be performed under optimum conditions. Items adjusted automatically (1) Offset adjustment (The offset voltage between the head amplifier output and the VREF reference voltage is compensated inside the IC.) * Focus offset adjustment * Tracking offset adjustment (2) Tracking balance adjustment (waveform drawing 13-2 EFBL) (3) Gain adjustment (The gain is compensated inside the IC so that the loop gain at the gain crossover frequency will be 0dB.) * Focus gain adjustment * Tracking gain adjustment State Code 0001 0002 [Servo System Error] Cannot detect Pickup-in SW DSP access error 0101 0103 [Error during close operation] Open/Close SW Low → High not functioning Open/Close SW High → Low not functioning 0201 0203 [Error during open operation] Open/Close SW Low → High not functioning Open/Close SW High → Low not functioning 0302 0306 0307 0308 [Error during skip operation] Pickup-in SW is not detected During Disc 1 search, Open/Close SW or Clamp SW or Disc SW do not change to low. Clamp SW Low → High not functioning Clamp SW High → Low not functioning T Stopped CH1=500mV DC 10:1 T CH2=200mV DC 10:1 CH3=1V DC 10:1 1999/04/05 20:26:47 500ms/div (500ms/div) NORM:20kS/s FDO 1 TE 3 EFBL 2 CH2 v/DIV 200mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000V CH2 : 0.000V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2k Figure 13-2 – 13 – =Trigger= Mode : SINGLE Type : EDGE CH1 Delay : 0.0ns Hold off : 0.2us CD-BP160W/180W/1500W/1700W • TEST MODE Setting of test mode Any one test mode can be set by pressing several keys as follows. <X-BASS> + <CD> + <POWER> TEST: CD opertion test Function:-CD test mode. -Enter test mode. C D T E S T IL isn't done OPEN/CLOSE operation is using manual. << >>, << >> buttons make pick's slide possible. <<PLAY>> key input. Do TOC IL. Do normal play When these following key is input into PLAY key, track number can be appoint directly << << << 1>> key: Track 4 2>> key: Track 9 3>> key: Track 15 <<MEMORY>> key input. Laser ON. <<MEMORY>> key input. Tracking OFF play at that specific point. <<MEMORY>> key input. <<STOP>> key input. Tracking ON play at that specific point. STOP <<STOP>> key input. STOP VOL — Last memory BAL — CENTER P.GEQ — FLAT X-BASS — OFF Sliding the PICKUP with << >>, << >> button must only be in STOP mode. To cancel : Power OFF – 14 – CD-BP160W/180W/1500W/1700W SW3 SW2 DISC CLAMP NUMBER M - 8 9 10 2 3 4 5 6 1 2 3 4 5 6 CNS4 7 1 1 2 3 4 5 6 CNP4 + 6 GND 5 CNP12 4 CLAMP SW 3 CD RES 2 DI 1 CLK DO 5 CE 4 DRF +5V(+B3) 3 WRQ DGND 2 CDINT L-CH 1 TO DISPLAY SECTION CNP11 R-CH AGND TO MAIN SECTION (TO IC401) M3 T/T UP/DOWN MOTOR LCHO CONT4 CONT2 CONT3 30 RCHO 32 31 LVSS 45 46 47 48 RVSS 76 CONT7 66 CL 75 CONT6 Q2 65 CE 64 40 68 DO 19 69 INT 13 IC2 LC78641E SERVO/SIGNAL CONTROL 70 WRQ 71 RES 72 DEF 3 CONT5 33 SLD0 26 52 XOUT XVDD HFL RFEV FE 7 14 15 16 TE FD0 24 TD0 23 +3.3V RVDD 5 18 36 44 49 50 LVDD 73 51 XIN VDD VDD5V VVDD ADAVDD SPD0 25 +5V XL1 16.9344MHz 74 67 DI 1 20 21 22 TE- FE 30 TIN1 1 2 3 4 2 17 25 41 42 38 39 35 18 VCC1 40 VCC4 24 VCC2 +5V 23 LASER DRIVER LDD FIN2 9 FIN1 11 PD 23 TIN2 IC1 LA9235M SERVO AMP. FE- 19 RFEV +3.3V 17 18 TE Q1 HFL CONSTANT VOLTAGR Q3 29 IC3 M63001FP FOCUS/TRACKING/ SPIN/SLED DRIVER 22 21 14 28 VCC3 4 +3.3V 8 5 6 7 15 16 26 27 7 8 PICKUP UNIT TRACKING COIL FOCUS COIL +5V M1 SPINDLE MOTOR M M2 SLED MOTOR M Figure 15 BLOCK DIAGRAM (1/3) – 15 – BI4 SW1 OPEN/ CLOSE SW4 PICKUP IN CD-BP160W/180W/1500W/1700W FM ANTENNA +B2 5 3 CF303 9 7 8 FM OSC 3 4 1 T302 FM RF 4 5 9 8 17 13 AM IF FM+B FM MO/ST GND DET VCO L AM MIX IC303 LA1832S FM/AM IF MPX. AM LOOP ANTENNA FM OSC Q302 X351 CF351 3 1 2 T301 L312 1 CF352 6 IC301 TA7358AP FM FRONT END 1 23 21 24 FM/AM OUT MPXIN 16 18 7 R FM/AM 14 15 12 STEREO 2 AM RF IN BF301 AM OSC IN 1 T351 SO302 CNP302 T306 AM BAND COVERAGE X352 4.5MHZ CE VT 20 1 22 16 15 DO AM TRACKING T303 CL 1 2 DI 1 2 11 3 4 5 6 OSC IC302 LC72131 PLL(TUNER) FM/AM MO/ST FM +B Q360 9 10 7 SWITCHING VDD 21 FM +B2 +B2 SO401 VIDEO/AUX L R 23 AUX TAPE CNS402 1 2 3 4 5 FROM CD SECTION CNP11 L CD 1 24 L(T2) 2 R(T2) 23 L NF 3 R NF 22 L-CH R-CH Q104~ Q107 POP REDUCE AC BIAS L REC R REC REF 6 4 21 R L T1/T2 NOR/ HIGH 15 Q108 Q109 CE IC401 LC75341 AUDIO PROCESSOR SYSTEM MUTE Q401 Q402 3 REC/PLAY PB 5 20 H/N 7 18 L REC R 8 L NF 17 R NF 14 SWITCHING 1 2 CL 24 21 R 4 L DI MUTING Q110 Q111 +B2 P.B 9 REC 16 12 9 R 16 L 10 R 15 L 11 R 14 L 12 R 13 L 7 8 17 18 13 R(T1) SWITCHING TAPE 2 TUNER L(T1) REC P.B. REC PB HEAD R IC101 PLAYBACK AND RECORD/ PLAYBACK AMP. PB HEAD L-CH TAPE 1 R-CH 17 T1/T2 10 ALC 19 SWITCHING T1/T2 Q103 Q101 Q102 BIAS SWITCHING SWITCHING ERASE HEAD BIAS Q114 OSC L104 Q112 Q113 Figure 16 BLOCK DIAGRAM (2/3) – 16 – BAIS CD-BP160W/180W/1500W/1700W +B2 R. PLAY FL701 FL DISPLAY SW401 SPAN SELETOR F. PLAY T2 PLAY 1 2 3 T1 PLAY 4 ~ 11 12 ~14 15 ~ 20 21 ~36 37 38 39 Q604 Q608 SOLENOID MOTOR TAPE DRIVER MOTOR Q601-Q603 Q607 M Q606 LED722 +B4 Q605 ~ ~ 1 4 5 6 +B4 KEY SW601-SW603 SW609-SW629 DO DI CE CL +B2 VDD VDD RESET ~ 31 ~ ~ 92 93 100 1 RX701 3 +B4 2 VDD 60 5857 5655 54 5352 51 50 49 48 4746 45 44 4342 4140 39 63 38 78 37 VLOAD 79 SYS. STOP 36 IC701 80 35 IX0328AW AVDD 34 85 SYSTEM MICROCOMPUTER 33 90 7 ~ 9 10 111213 15 16 17 ~20 21 22 23 24 +B4 JK951 HEADPHONES +B4 TO CD SECTION XL701 4.1943MHz Q609 SP. DET. +B3 RESET IC 3 Q901 Q902 Q903 Q904 IC704 2 M Q971 1 +B4 FAN MOTOR RL951 SO902 SPEAKER TERMINAL IC901 1 STK402-040 7 R-OUT 15 POWER AMP. 11 L-OUT -Vcc 13 +Vcc 9 8 SYSTEM MUTE FRONT SPEAKER SURROND SPEAKER –B1 Q401 Q402 +B1 F801 T4.0A L 250V PT801 POWER TRONSFORMER 180W/1700W ONLY D801 REC/PLAY SW801 VOLTAGE SELETOR 230-240V F802 T4.0A L 250V KIA7810AP VOLTAGE REGULATOR +B2 +B3 A10V 220V 127V SO801 AC INPUT SOCKET 110V D802-D805 IC841 +5V AC POWER SUPPLY CORD AC 110V/127/220/ 230-240V, 50/60Hz F803 T2.0A L 250V IC851 KIA7805P VOLTAGE REGULATOR T1/T2 IC852 +B4 UNSWITCH 5V TF 150 C AN78L05 CONSTANT VOLTAGE REGULATOR BAIS Figure 17 BLOCK DIAGRAM (3/3) – 17 – CD-BP160W/180W/1500W/1700W CD SERVO PWB-B A B F R50 47 5 5 5 5 R51 68K TIN1 4 4 4 4 R52 68K FIN1 3 3 3 3 R53 68K FIN2 2 2 2 2 R54 68K 1 1 1 C23 0.047 TIN2 R56 68K IC1 LA9235M SERVO AMP. R55 68K C24 2.2/50 C11 0.47/6.3 1 FIN1 CNP1 C +B 7 6 30 1 REF FIN2 REF 2 29 REF AGCON TIN1 C54 47/10 C C55 0.01 C7 10/16 7 R47 3.3 R42 120K RF- EFBL 27 25 REF DH 24 ODRV 22 PH/BH REF LPF 9 REF 10 11 ODRV 12 AGCON 19 LPF 18 REF REF 13 TEST0 14 TES1 21 20 REF LPF C18 3P (CH) R5 39K R6 27K PH R80 1M C20 0.1 R15 R8 330 C13 0.01 C17 0.0047 BH 10K C42 68P C14 0.33 RFEV FE- R3 FE 100K TE- R4 TE 10K HFL REF 17 REF 16 TEST C82 0.022 4 Q3 KTA1266GR C2 47/1 C41 100/10 REF 15 C22 100P R10 27K 5 NC 23 APC R7 6.8K RF 26 8 AGON R25 10K D REF 6 GND +B REF PH 5 VREF LDD C51 47/10 C12 0.1 RFSW REF TIN2 4 C6 100/10 REF1 LDON C53 0.001 28 3 C8 0.1 +B VCC ODRV C26 0.047 E 7 6 C25 0.1 B 7 6 C19 100/10 Vref 7 6 CNS1A Vcc CNS1B A LASER DRIVER R43 220K D93 DS1SS133 13 E 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7 8 PICKUP UNIT 8 8 8 FO+ FO- FO- GND TR+ PD TR- VR 3 + + 4 37 7 11 12 13 14 SLDO +B G VCC1 STANDBY R48 6.8K Vref CNS3B CNS3A + 6 6 6 6 + 5 5 5 5 4 4 4 4 - 3 3 3 3 2 2 2 2 1 1 1 1 CNP3A M1 SPINDLE MOTOR M2 SLED MOTOR SW4 PICKUP IN M M H C50 100/16 C49 100/16 MUTE CD MOTOR PWB-C 32 + 30 29 26 + + 19 20 - 21 GND 31 27 18 C47 100/16 34 16 + LOADING M- 33 28 17 +B LOADING M+ 36 15 - SL+ LD_MVCC4 35 - SL- 39 38 9 GND 40 5 10 CNP2 + 6 8 LD 41 IC3 M63001FP FOCUS/TRACKING/ SPIN/SLED DRIVER 3 CNS2A 3 CNS2B 3 FO FO+ 42 - + + 25 24 VCC3 SPSP+ SPO SPDO VCC2(SPN) 23 + LD ACTUATOR 3 C46 0.022 - + - VR TR+ LD_M+ + 2 + PD TR- 2 1 - FO- 2 FD - F 2 TO FDO - GND 2 TDO - FO- TR- - FO+ 1 - FO+ 1 - TR+ 1 - TR+ 1 +B + TR- +B + C52 0.01 - 22 SPSP+ SL+ +B SL- +B PUIN GND(D) CNP3 • NOTES ON SCHEMATIC DIAGRAM can be found on page 34. 1 2 3 4 Figure 18 SCHEMATIC DIAGRAM (1/9) – 18 – 5 6 CD-BP160W/180W/1500W/1700W 100P R75 1K DO C76 100P R76 1K DI C77 100P R77 1K CL C78 100P R78 1K L62 2.2µH CE CL DI DO INT WRQ DEF RES C80 0.1 COMMAND INTERFACE 64 SUBCODE DECODE CRC 63 PW 62 SBSY 59 DATA 58 DATACK 50 17 18 49 48 + LPF 1BIT DAC - 19 47 46 +B +B C34 0.022 R-CH RCHO RVSS R82 2.2K LVSS LCHO 41 EMPH +B DOUT C2F VDD 1K 1K C30 0.1 2 L-CH 4 +5V 5 +B CNP11 C83 0.022 +B 9 C31 100/10 CONSTANT VOLTAGE +B +B L61 0.82µH R16 10K Q1 KTC3203 Y +B +B ZD61 DZ3.9BSB D_M+B +B INT WRQ DRF CE +B DI R21 470 C47 100/16 2 WRQ DRF CE DO DI 7 CLK 8 CD RES 9 CLAMP SW 10 3 P21 11-B CNS701 FROM DISPLAY PWB 5 6 RES D22 DS1SS133 D21 DS1SS133 CDINT 2 4 CL R22 470 1 3 DO OADING M+ OADING M- P22 1-B CNS402 FROM MAIN PWB 3 DGND C56 330/6.3 +B D_M+ CC4 1 AGND R81 2.2K 42 MUTEL EFLG CONT5 CONT4 CONT3 PCK SLDO SPDO FDO 6 AUDIO OUT FSX R17 R39 470 R38 270 TDO RVDD LVDD C39 10/16 +B 43 MUTER 27 28 29 30 31 32 33 34 35 36 37 38 39 40 TEST R46 1 25 26 1.2K 13 ERROR CORRECT R45 R35 1K D/A LASER 24 XIN XVDD 45 SPDO EFBL 23 FDO R20 220 44 GENERAL S/H 22 TDO XOUT R84 10K 51 XVSS 220 A/D ASLRCK R58 SW SERVO PROCESSEROR 52 ASDACK C64 0.47/6.3 16 53 CLOCK GENERATOR 15 TE AUTO ADJUST 54 XL1 16.9344MHz ASDFIN R83 10K SW 55 DIGITAL FILTER FE 56 EXTERNAL AUDIO IN JITER DEFECT CONTROL BHREF 21 TBLO R44 1K 12 11 10 61 SFSY 60 16M PHREF 20 2 C45 100/10 SBCK C43 C40 0.0015 0.0015 IC2 LC78641E SERVO/SIGNAL CONTROL 57 LRSY 14 C29 0.1 ADAVSS C44 0.1 73 72 71 70 69 68 67 66 65 13 ADAVDD CE +B +B SLICE LEVEL CONTROL 9 VREF R43 220K INT C75 10 PH(RFENV) D93 DS1SS133 1K 8 JITTV 11 JITTC C41 100/10 R74 7 12 C28 47/10 100P SERIAL OUT 6 BH C82 0.022 WRQ C74 INTERPOLATION MUTE ATTENUATION DEEMPHASIS SLCO EFMIN C27 0.1 1K CLV CONTROL CONT2 C42 68P R73 C38 10/16 FR 10K C26 0.047 C17 0.0047 100P VSS DISC_NO 5 SLCIST R8 330 RES C73 FRAME SYNC DEFECT,PROTECT EFM DECODE 4 1.2K HFL R15 PLL VCEC CONT1 C20 0.1 3 PCKIST VVDD R80 1M 1K R19 47 VVSS R14 DRF R72 2 C81 0.022 R11 12K 1K 0.01 GENERAL 1.2K R10 27K 1 R13 680 PD02 C21 0.1 R71 C72 VDD5V R40 C22 100P R79 1.5M 100P 80 79 78 77 76 75 74 PD01 SLDO C19 100/10 C25 0.1 C24 2.2/50 7 R12 680 C71 EFMO FG(D_Vref) C23 0.047 FSEQ DEFECT V/vP CONT7 +B CONT6 R68 8 R67 1K R95 10K 1K R94 10K O/C 3 CD SIGNAL GND CNP12 Q2 1 KRC102M ND CC3 P- CNS4 P+ O/C PO SPDO GND(D) CC2(SPN) DISC_NO M+ M- BI4 SW1 OPEN/ CLOSE 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 + 6 6 6 - M CNP4 SW2 CLAMP SW3 DISC NUMBER M3 T/T UP/DOWN LOADING CD LOADING MOTOR PWB-E +B +B • The numbers 1 to 13 are waveform numbers shown in page 35. 7 8 9 10 Figure 19 SCHEMATIC DIAGRAM (2/9) – 19 – 11 12 CD-BP160W/180W/1500W/1700W A DISPLAY PWB-A2 P22 F P21 F P20 F P19 P18 P17 P16 P15 P14 P13 P12 P11 P10 P09 P08 P07 P06 P05 P04 P03 P02 P01 G11 G10 G09 G08 G07 G06 G05 G04 G03 G02 G01 F F F FL701 FL DISPLAY 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 C R630 10K T_T1/T2 T-BIAS REC/PLAY RES OUT DRF WRQ RESET 70 P15/DIST0 65 P20 64 P21 63 P22 D608 DS1SS133 1 G SOLENOIDE SOLENOIDE 1 2 3 4 5 6 7 8 9 10 11 12 13 1 T2 PLAY 1 +5V 2 T2 RUN 3 MTR + 4 T2 SOL 5 SOL 6 T1 R_REC 7 T1 RUN 8 C617 R637 10/16 1K R658 47K D615 R673 1K KEY 0 R674 KEY 1 1K KEY 2 R675 1K 1K 10K R667 1K R668 R669 Q604 DS1SS133 Q608 KTC3199 GR KTC3199 GR 0V +B 8.6V Q607 9.3V KTA1273 Y R662 10K 9.3V +B R651 Q605 9.3V 10K KTA1271 Y 9.3V +B 0V Q606 KTA1271 Y C620 47/25 D613 DS1SS133 M10V C618 R655 10/16 1K 9.3V R652 10K D614 DS1SS133 13 H • NOTES ON SCHEMATIC DIAGRAM can be found on page 34. 1 2 3 AVDD AVref REMOCON NO USE SP_RLY SYS STOP VSS SMUTE T_SOL_B T_SOL_A T_MOTOR TIMER LED VDD 2.2K 2.2K 2.2K 2.2K R656 10K R650 68K R649 10K R638 47K ZD601 DZ6.2BSC 9 10 T1 RUN COM 11 12 F-REC 13 13 R660 10K +B R627 100K CNP703 FC702 R670 10K R672 10K +B + - +B LED722 R671 10K +B 9.3V M R661 R663 R664 R665 RUN R653 1K R625 100K R624 270 C613 R626 2.2/50 100K C614 2.2/50 8 7 TAPE MECHANISM PWB-D1 TAPE MOTOR +B D604 DS1SS133 4 1 IC703 KIA4558P OPE AMP. R659 1K C612 2.2/50 8 7 R636 68K F D602 DS1SS133 4 Figure 20 SCHEMATIC DIAGRAM (3/9) – 20 – R M-BUSY/TUN SM 26 N 27 S 28 SP 29 SP 30 –B D611 DS1SS133 2 C607 R609 C604 0.022 3 R619 470K 0.0068 2.2M R615 5 150K 6 R610 C608 R620 15K 0.022 180K R623 270 4 1 R 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 +B D603 DS1SS133 R614 390K R612 1M R605 56K C603 0.0068 T2 RUN C611 0.022 R613 820K R617 2 R607 C605 220K 3 33K 270P R618 220K R608 C606 5 0.0027 68K 6 C602 R604 0.0027 12K D601 DS1SS133 R603 10K DO 24 AVSS 25 55 FPA 54 PLAY SW_B 53 PLAY SW_A 52 CD CLAMP SW 51 +B C610 0.022 C601 270P E 10K 10K 10K 10K 10K CLK 22 R DI 23 R 57 MIC IN 56 FPB T1 R632 R629 R633 R634 R635 61 AC RLY_CONT R725 10K D XL VDD 16 CD CLK 17 R CD DI 18 R CD DO 19 R CD CE 20 R CE 21 R 60 SPN 59 DISTOUT/SW OUT 58 KARAOKE LATCH R642 22K R643 1K R644 1K R645 22K R646 1K R647 1K R648 1K R R R R R6 R6 R 10 X1 12 VPP/IC 13 XT2 14 CD INT 15 R 62 R654 SPK_DET 1K D612 DS1SS133 2 3 4 5 6 7 8 9 X2 11 IC701 IX0328AW SYSTEM MICROCOMPUTER 66 P19 IC702 KIA4558P OPE AMP. G1 S-BUSY 77 P8 76 P9 69 P16/DIST1 68 P17/DIST2 67 P18/DIST3 +B + VDD 1 75 P10 +B G2 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 80 P6 79 VLOAD 78 P7 74 P11 73 P12 72 P13 71 P14 R621 33 G3 G4 G5 G6 G7 G8 G9 G10 G11 P1 P2 C616 1/50 C609 47/50 P3 P5 P4 R622 100K R616 1K -25.7V R606 1K R611 100K 3.3V -25.7V R602 100K 3.3V R601 1K -25.7V B Q603 KTC3199 GR -25.7V -25.7V -25.7V Q602 KTC3199 GR 3.3V Q601 KTC3199 GR 5 6 G04 G03 G02 G01 F F F CD-BP160W/180W/1500W/1700W 7 6 5 4 3 2 1 BI701 REC/PLAY RES OUT DRF WRQ RESET R678 R679 R680 R681 R682 R683 R684 10 X2 11 XL701 X1 12 C623 VPP/IC 13 18P(CH) XT2 14 R685 1K CD INT 15 W UTER VDD 16 CD CLK 17 R686 CD DI 18 R687 CD DO 19 R688 CD CE 20 R689 CE 21 R690 R693 1K 1K 1K 1K 1K 1K 1K 1K R694 1K CLK 22 R691 DI 23 R692 DO 24 AVSS 25 R676 4.7K AVref R673 1K KEY 0 R674 KEY 1 1K KEY 2 R675 1K 1K R668 R669 1K 10K 38 37 36 35 34 33 32 31 SPAN SW OUT TUN SM CE DO DI CLK T_BIAS T_T1/T2 REC/PLAY SPA_SIG SMUTE VF1 -VP VF2 SP_RLY +B M_10V –B -15V D_GND +B +5V A_GND UN_SW 5V AC_RLY CONT SP_DET M_GND +B AVDD NO USE SP_RLY SYS STOP M-BUSY/TUN SM 26 NO USE 27 SPEANA2 28 SPEANA1 29 SPEANA0 30 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 P19 12-F TO CD SERVO PWB CNP12 CNS701 1K 1K 1K 1K 1K 1K 1K C633 10/16 T-BIAS 2 3 4 5 6 7 8 9 R708 10K S-BUSY T_T1/T2 C625 220/10 +B VDD 1 C622 15P(CH) 93 94 95 96 97 98 99 100 C624 0.022 G1 G2 G3 G4 G5 G6 G7 +B +B 25 FC701 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 P23 12-D CNP401 TO MAIN PWB CNP702 R666 1K 1 +B +B +B +B –B –B +B R716 4.7K R670 10K +B R672 10K L601 100µH D617 DS1SS133 D616 DS1SS133 R671 10K +B 5V BACK UP R697 680 SW616 CD R699 820 R703 1K 1 R706 1.5K R711 100K D618 DS1SS133 R712 R714 2.7K 3.9K R709 2.2K +B D621 DS1SS133 RX701 R723 REMOTO SENSOR 100 1 2 3 C627 0.01 +B D620 DS1SS133 IC704 KIA7042AP RESET Q609 R704 KRC102 M C628 3 47K 3.3/50 2 C626 0.1/50 G8 C621 1/50 CD INT WRQ(DSP) DRF CD CE CD DO CD DI CD CLK RES OUT CLAMP SW C629 0.022 R718 5.6K C630 10/50 R719 10K 1 2 3 R721 18K C631 0.022 C632 47/25 R722 33K R724 100K SW628 TUNER (BAND) SW621 SW626 SW627 SW617 SW618 SW619 SW620 FAST SW622 SW623 SW624 SW625 TUNING VIDEO/ PLAY/ REVERSE REC/ TAPE TUNING MEMORY/ REWIND FORWARD REPEAT STOP PLAY PAUSE /TIME UP AUX DOWN SET R701 R707 R726 R695 R698 820 1K 1.5K 180K 680 SW615 SW629 SW611 SW612 SW613 SW614 DIMMER X-BASS/ EQUALIZER VOLUME VOLUME REVERSE UP DOWN DEMO R696 680 R700 820 R702 1K SW601 SW602 SW603 ON/ CLOCK TIMER/ STAND-BY SLEEP 7 8 9 R705 1.5K R713 2.7K R710 2.2K R717 68K R715 3.9K R720 100K SW609 DISC SKIP SW610 OPEN/ CLOSE 10 Figure 21 SCHEMATIC DIAGRAM (4/9) – 21 – 11 12 CD-BP160W/180W/1500W/1700W A +B C407 10/50 R409 10K GND (A_GND) r R j +5V +B s R402 330 LBASS LTRE 5 C413 0.0027 1/50 C419 4.7/50 R407 2.2K C421 1/50 C423 1/50 C425 1/50 C401 0.001 t 0.1(ML) 6 C402 0.001 R417 3.3K C427 R408 2.2K 1/50 RIN LIN 8 LSEL0 9 L4 AUX R4 10 L3 DECK R3 11 L2 TUN R2 12 L1 CD R1 RSEL0 C403 22/25 19 18 0.0027 1/50 C420 4.7/50 + - 17 C414 C418 R416 3.9K 16 15 14 13 C422 1/50 C424 1/50 C426 1/50 C428 1/50 R418 3.3K IC401 LC75341 AUDIO PROCESSOR Q401,Q402 : SYSTEM MUTE GND (CD_GND) RTRE 7 R410 10K +B C406 22/50 22 C408 10/50 ROUT 21 C410 0.1(ML) C412 0.1(ML) RBASS 20 VREF + - LOUT C411 C417 Q402 KTC3199 GR TO POWER SECTION P24 1-G 4 CCB INTERFACE + - C R404 2.7K 3 VSS Q401 KTC3199 GR R403 2.7K L VDD 23 + - R401 330 CLK 24 CE + - B q C409 0.1(ML) R415 3.9K DI 2 + - +B 1 R425 22K +5v C404 100/16 + - BI402 1 2 3 4 5 1 2 3 4 5 P19 12-D CNP11 TO CD SERVO PWB C405 0.022 R-CH A_GND L-CH CD_GND + - CNS402 +B +B D 0V 0.7V R107 2.2K 0V Q105 2SC1845 F G 3 C115 330P 4 R117 56 5 7 6 R125 33K 9 3 4 5 6 C145 C136 22/25 11 Vcc 13 GND RIPPLE R135 10K R138 15K Figure 22 SCHEMATIC DIAGRAM (5/9) – 22 – Nor/CrO2 C135 47/25 • NOTES ON SCHEMATIC DIAGRAM can be found on page 34. 2 ALC 10 C129 22/25 H 1 C138 220/10 R136 10K R134 100 C132 0.0033 C134 47/25 R132 1.5K 8 14 15 56K + Hich=CHROME + 56K C139 3.3/50 C137 0.022 C123 R123 47/25 5.6K 16 17 ALC IC101 AN7345K C107 0.001 C117 100/25 18 19 C130 0.022 C126 270P R130 3.9K R128 20 12 IC101 2 6.8K 68K R126 R120 3.9K C122 47/25 R118 100K L 1 R115 1K 0V 21 - 112K + Hich=T1 + - 112K 0V R109 3.3K 0V 22 C133 0.0033 C105 180P 23 R C113 330P 0.7V 0 R1 22 R133 100 0V BI102 Q111 KTC3199 GR C131 0.022 RECORD/ PLAYBACK/ ERACE HEAD PWB-D2 Q107 2SC1845 F TAPE2_L1 TAPE2_L2 0 C128 22/25 R127 6.8K 4 5 6 R108 Q106 3.3K 2SC1845 F 0V TAPE2_R1 0V C114 330P R114 1K C112 330P 24 0V 0V 0.7V R122 5.6K R129 3.9K R106 2.2K 0V M_GND ERASE TAPE2_R2 A_GND R124 C118 33K 0.033 C120 560P C143 0.0022 1 2 3 4 5 6 7 C106 0.001 R110 47K 0.7V CNS102 1 1 2 2 3 3 4 5 6 L-CH Q104 2SC1845 F Q108 KTC3199 GR R-CH 0V R112 4.7K F C104 180P R105 1K R140 10K 0V C144 0.0022 R116 56 C116 100/25 R111 4.7K TAPE2 RECORD/ PLAYBACK/ ERACE HEAD C103 0.001 R141 10K 0.7V 0.7V R104 1K 3 A_GND 2 TAPE1_L 1 CNS101 L-CH ERASE HEAD TAPE1_R 3 2 1 Q109 KTC3199 GR CHASIS R-CH 3 Q103 KRC104 M R137 15K C102 0.001 R113 47K E 1 R119 100K R121 3.9K 9.3V TAPE1 PLAYBACK HEAD Q101 KTA1266 GR R1 22 Q110 0V KTC3199 GR C127 270P 0V 2 8.6V R142 220K MUTING C119 0.033 C121 560P 9.3V 1 R131 1.5K 0V R103 4.7K 3.4V 3 0V 2 C108 100/16 R102 10K 3.4V R101 10K Q102 KRC104 M 0V C101 0.047 REC_R R157 150 FM SIGNAL PLAYBACK SIGNAL RECORD SIGNAL CD SIGNAL VIDEO SIGNAL CD-BP160W/180W/1500W/1700W MAIN PWB-A1(1/3) +B 4 +B 3 +B C406 22/50 2 C408 10/50 C410 0.1(ML) C412 0.1(ML) 0 9 8 7 6 4 C414 0.0027 C418 1/50 C420 4.7/50 C422 1/50 C424 1/50 C426 1/50 C428 1/50 R416 3.9K R419 5.6K C429 390P R420 5.6K C430 390P R421 27K L-ch R422 27K R-ch SO401 VIDEO/AUX CE DI TUN_R R418 3.3K TUN_L DO TUN_SM R424 470K R423 470K SW401 SPAN SELECTOR CE C138 220/10 R136 10K +B 15 14 13 12 11 10 P21 11-D CNP702 TO DISPLAY PWB 9 8 7 6 5 4 3 2 1 11.6V R145 4.7K BIAS 1 11.6V 2 R146 82(1/2W) 0V 3 Q113 KRC104 M 0V R148 22K +B 0V 0V C140 0.0082(PP) C141 0.039 (ML) 8 +B R149 4.7 L104 330µH C142 47/25 g -15V GND (D_GND) R147 47K –B +B a b c p h f K i UN_SW_5V AC _RLY CONT SP_DET GND (M_GND) 0V SW_5V GND (A_GND) 0V VF1 -VP VF2 SP_RLY M_10V Vcc 18 17 16 R144 47K 11.7V C148 0.047(ML) 7 20 19 +B Q112 KTA1266 GR RIPPLE 12 25 25 24 23 22 21 FC701 A_12V C133 0.0033 R135 10K 11 GND Nor/CrO2 C135 47/25 C131 0.022 R133 100 13 ALC 10 C129 22/25 R131 1.5K 14 IC101 PLAYBACK AND RECORD/ PLAYBACK AMP. 9 ALC 15 D G 1 C145 0.001 C136 22/25 R139 220 16 8 VF1 -VP VF2 SP_RLY M_10V -15V D_GND SW_5V A_GND UN_SW 5V AC_RLY CONT SP_DET M_GND +B Q114 KTC3203 Y R134 100 0V +B +B C132 0.0033 C134 47/25 R132 1.5K +B –B Q111 KTC3199 GR 56K + Hich=CHROME + 56K C127 270P 0V C130 0.022 C126 270P R141 10K 0.7V C128 22/25 17 SMUTE R143 220K R140 10K 0V REC/PLAY SPA_SIG C150 22/25 REC_R REC_L DO DI CLK T_BIAS T_T1/T2 Q110 F CNP401 TUN_SM V KTC3199 GR 0.7V TO TUNER SECTION P26 1-G E 100/10 +B UTING C 50/9 +B R142 220K B A CLK l e M n m TO POWER SECTION P24 1-G 9 10 Figure 23 SCHEMATIC DIAGRAM (6/9) – 23 – 11 12 CD-BP160W/180W/1500W/1700W 7 +Vcc 6 5 8 +B Ch2 Out 4 3 Ch2 Out 2 -Vcc 9 10 11 13 12 C901 220P C902 220P C910 100/50 C906 47/50 C905 47/50 C904 15P C912 10/50 C911 10/50 R920 22K R903 820 R918 100 R904 820 R902 56K R905 1K R931 1K –B +B R919 100 C909 100/50 C903 15P R901 56K B 15 14 –B R906 1K C914 0.1 (ML) C913 0.1(ML) C916 0.1 (ML) C915 0.1(ML R910 1K C908 0.022 R911 10K Q901 KTC3199 GR R912 10K Q904 KTC3199 GR D903 DS1SS133 +B R914 56K R908 D901 0.1(1W) DS1SS133 R909 1K D902 DS1SS133 C907 0.022 C Q902 KTC3199 GR R917 4.7 R916 4.7 C917 47/50 R915 56K R907 0.1(1W) R913 56K R933 68K C936 10/50 –B R934 68K C935 10/50 R932 1K 1 Ch1 Out + Ch2 - + Ch1 - Ch1 Out IC901 STK40204 POWER AMP. A Q903 KTC3199 GR +B D +B +B –B –B G TO MAIN SECTION P22 2-C P26 1-G g b c a p h f k j l e n m 220/25 C831 ZD803 0.022 C 22 C807 3300/25 IC851 KIA7805P VOLTAGE REGULATOR ZD802 DZ6.2BSA 1 2 C851 0.1(ML) 3 +B -VP VF2 VF1 SP_RLY M_10V -15V GND (D_GND) SW_5V +B GND A_GND +B UN_SW_5V +B SP_DET GND (M_GND) H • NOTES ON SCHEMATIC DIAGRAM can be found on page 34. 1 2 3 4 Figure 24 SCHEMATIC DIAGRAM (7/9) – 24 – C813 100/35 D805 1N4004S R807 12K C841 0.1(ML) IC841 KIA7810AP VOLTAGE REGULATOR C843 47/25 10K 0.022 (CD_GND) A_12V +B C852 GND C842 0.1(ML) R841 22K s 1 2 47/25 +B +B C 220 R802 22K +B 1 2 C853 R 3 R851 (A_GND) D851 DS1SS133 r GND +B 47/25 t L C854 q IC852 AN78L05 CONSTANT VOLTAGE REGULATOR C855 0.047(ML) F +B R801 22K D803 1N4004S 3 SW-5V +B R803 680(2W) +B +B i C832 C833 22/25 R832 33(1/2W) R833 22K C834 0.047(ML) E 9.4V R831 3.3(1/2W) 19.41V 10V DZ130BSB Q831 KTC2026 +B 5 6 CD-BP160W/180W/1500W/1700W R975 4.7(1/2W) +B D971 DS1SS133 R973 15K RL951 RELAY R953 4.7K C972 10/50 R954 4.7K 4.9V R971 1K 2 2 1 1 M M901 FAN MOTOR Q971 KTC3203 Y R972 68K FM SIGNAL FW951 1 1 L1_OUT R1_OUT C913 0.1(ML) CNS971 CNP971 C971 47/50 2 R952 330(1/2W) 3 5 Q951 2 0.2V KRC107 M 1 CNP951 4 D951 DS1SS133 R951 330(1/2W) 5 JK951 HEADPHONES HEADPHONES PWB-A3 0V 3 4.4V C915 0.1(ML) +B L921 0.29µH + + L920 0.29µH – R917 4.7 – + + – +B – C930 22/50 SP_L Ch SP_R Ch FRONT SPEAKER SP_L Ch_GND SP_R Ch_GND SO901 SPEAKER TERMINAL SP_L Ch SP_R Ch SURROUND SPEAKER SP_L Ch_GND SP_R Ch_GND C931 22/50 180W/1700W ONLY F801 T4A L 250V D801 TS6B04GM C803 2200/50 02 K C804 2200/50 –B C806 0.1 (ML) -28V R804 2.2K F803 T2A L 250V C808 100/50 C810 220/50 C812 100/50 R805 47K C813 100/35 C811 47/50 ZD802 DZ6.2BSA R807 12K ZD801 DZ300BSB 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 5 5 4 4 3 3 2 2 1 1 230-240V SO801 VOLTAGE SELECTOR 220V 127V 110V SOCKET PWB-A4 CNP802 SO801 AC INPUT SOCKET AC 110/127/ 220/230-240V 50/60Hz TF 130 °C D807 1N4004S D804 1N4004S -33V D806 1N4004S C805 0.1 (ML) C809 100/50 D805 1N4004S F802 T4A L 250V C802 0.1(ML) D802 1N4004S D803 1N4004S CNP801 C801 0.1(ML) +B 01 K PT801 POWER TRANSFORMER -28V R806 D808 10 Q801 1N4004S KTA1274 Y MAIN PWB-A1(2/3) 7 8 9 10 Figure 25 SCHEMATIC DIAGRAM (8/9) – 25 – 11 12 CD-BP160W/180W/1500W/1700W AM LOOP ANTENNA 2 1 2 1 SO302 FM TERMINAL AM SIGNAL MAIN PWB-A1(3/3) C315 0.0047 D305 C308 4.7P L312 C304 0.01 FM RF R314 R311 100K 22 C305 4.7P (CH) VD302 KDV147B R313 33K C317 0.001 C310 15P (CH) C312 0.022 T301 FM OSC R325 47K Q302 KTC3194Y FM IF T302 R322 680 C324 8.2P(UJ) C C318 100P 2 C311 18P (CH) R327 33 1 2 3 C303 10P (CH) C309 0.001 C316 0.022 B BF301 DS1SS133 R302 10 1 2 3 4 5 6 1 C313 22P (CH) CF303 C337 27P T306 7 8 IC301 TA7358AP FM FRONT END R375 470 R374 1K R373 1K R372 1K R378 1K 1 2 X IN 3 CE IC302 DI LC72131 4 5 6 X OUT VSS AOUT CL AIN PD DO 7 FM/AM 19 9 FM/AM 10 MO/ST 11 ST IND C393 1/50 R380 1.5K VD301 KVD147B C326 0.001 T351 C392 C380 0.001 10/16 AM IF C387 0.022 2 L351 100µH R377 47K R395 47K R388 3.9K R359 1.8K G TO MAIN SECTION P25 10-G I G E GND F A B D C K Q360 KTA1266GR R385 5.6K C391 47/16 +B R383 5.6K A GND L352 100µH C395 0.022 R391 270 R392 270 +B C355 22P C370 1/50 C357 2.2/50 R355 3.3K C358 1/50 FM IF IN 2 AM MIX OUT 3 AM OSC OUT AM OSC IN FM AFC AM RF IN REG 24 23 C362 3.3/50 22 C361 0.022 21 5 VSM 20 AM IF IN AM LOW 19 CUT FM/AM 18 GND OUT 6 SD 4 7 STEREO 8 FM DET MPX VCO 17 MPX IN 16 R-CH OUT L-CH OUT 15 14 MO/ST 13 VCC 10 11 IF OUT PHASE PHASE (FM/AM) C363 0.022 C364 10/16 C365 0.022 C366 0.001 R350 2.7K C367 1/50 9 12 R358 3.9K R365 10K IC303 LA1832S FM IF DET/ FM MPX/AM IF X351 456KHz C368 1/50 TP302 R356 1K C369 27P(UJ) C372 1/50 R362 6.8K R357 470K C374 0.015 C373 0.015 C371 1/50 R361 R364 6.8K 10K R363 10K C396 100/10 TUN_SM R370 1K TUN_R C356 0.001 1 ZD351 MTZJ5R1B A_12V R353 270 C398 100/10 R387 5.6K g C354 CF351 0.022 C399 0.022 F +B 3 R352 1K C353 0.022 R393 1K R386 22K R384 5.6K 1 CF352 C386 330P R360 4.7K C331 0.047 R351 5.6K C350 0.022 C394 47/16 SD 13 IF IN 12 R376 1K C332 0.022 C342 0.022 C352 10/16 R379 2.2K C385 0.01 C330 15P (UJ) R323 68K R309 10K C351 0.022 C397 0.022 R381 10K 18 17 VDD 16 FM IN 15 AM IN 14 8 IF CONT E 22 21 20 C381 R382 12P 150 (CH) TP301 D X352 4.5 MHz C335 560P C334 27P (UJ) R336 10K +B C382 15P (CH) T303 AM OSC R316 4.7K +B C302 0.001 C323 0.022 AM BAND COVERAGE fL C307 10/16 VD303 KDV147B 3 C338 0.001 D301 DS1SS133 9 C306 0.022 B.P.F C314 0.0047 CNP302 C301 0.01 C375 0.001 TUN_L DI CE DO CLK GND D GND H • NOTES ON SCHEMATIC DIAGRAM can be found on page 34. 1 2 3 4 Figure 26 SCHEMATIC DIAGRAM (9/9) – 26 – 5 AM TRACKING fL A D302 DS1SS133 FM SIGNAL 6 CD-BP160W/180W/1500W/1700W VOLTAGE IC1 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 IC2 VOLTAGE 1.6V 1.6V 1.6V 1.6V 1.6V 1.6V 0V 2.6V 0V 0V 0V 3.3V 1.6V 1.6V 1.6V 0V 0V 1.6V 1.6V 1.6V 1.6V 1.6V 0V 1.6V 0V 0V 0V 1.6V 1.6V 3.3V IC3 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 VOLTAGE 1.6V 1.6V 1.8V 2.1V 2.1V 2.1V 2.1V 0V 0V 0V 0V 0V 0V 0V 2.1V 2.1V 1.6V 4.9V 3.5V 1.6V 0V 0V 4.9V 4.9V 1.6V 2.1V 2.1V 1.9V 0V 0V 0V 0V 0V 0V 0V 4.2V 0V 2.1V 2.1V 4.9V 2.1V 2.1V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 VOLTAGE 0.7V 0V 0V 0V 3.3V 2.4V 0V 0V 1.6V 0V 4.7V 1.7V 0V 1.6V 1.6V 1.6V 1.6V 3.3V 0V 1.6V 1.6V 1.6V 1.6V 1.6V 1.6V 1.6V 1.6V 0V 0V 2.1V 2.1V 0V 3.3V 3.5V 3.3V 3.3V 3.3V 1.6V 1.6V 0V 0V 3.3V 3.3V 3.0V 1.5V 0V 0V 1.5V 3.0V 3.3V 1.8V 3.0V 0V 0V 0V 0V 1.7V 3.3V 0V 3.0V 1.6V 0V 2.4V 0V 0V 0V 0V 4.8V 4.9V 4.9V 4.6V 0V 4.9V 0V 0V 0V 3.2V 0V 0V 3.4V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VOLTAGE 0V(0V) 0V(0V) 0.5V(0.5V) 1.9V(1.9V) 0V(0V) 0V(0V) 0V(0V) 0.6V(0.6V) 3.3V(3.3V) 3.3V(3.3V) 0V(0V) 0V(0V) 6.7V(6.7V) 4.0V(4.0V) 0V(0V) 3.3V(3.3V) 0.6V(0.6V) 0V(0V) 0V(0V) 0V(0V) 1.9V(1.9V) 0.5V(0.5V) 0V(0V) 0V(0V) IC301 PIN NO. 1 2 3 4 5 6 7 8 9 VOLTAGE 2.1V(2.1V) 4.5V(4.8V) 2.1V(2.1V) 2.1V(2.1V) 0V(0V) 4.6V(4.9V) 4.6V(4.9V) 2.4V(3.2V) 4.5V(4.8V) 3.9V(0V) 3.3V(1.8V) 3.3V(1.1V) 3.5V(2.0V) 1.2V(1.2V) 1.2V(1.2V) 2.0V(2.0V) 2.7V(0V) 2.1V(0.9V) 0V(1.9V) 0.3V(0.9V) 2.6V(2.0V) 2.6V(2.0V) 4.5V(4.8V) 3.0V(3.3V) IC401 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 VOLTAGE 0.8V(0V) 1.5V(0V) 3.6V(0.4V) 1.5V(0V) 0V(0V) 3.6V(0.4V) 2.8V(0.2V) 3.5V(0.3V) 3.6V(0.3V) IC302 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 IC701 IC303 IC101 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VOLTAGE 2.4V(2.4V) 0V(0V) 0V(0V) 0V(0V) 4.6V(4.7V) 4.8V(4.9V) 0.1V(9.9V) 4.2V(0V) 3.3V(0V) 3.4V(0V) 4.6V(4.9V) 2.2V(0V) 4.6V(4.9V) 0V(0V) 0V(2.4V) 2.3V(0V) 4.6V(4.9V) 0.8V(4.9V) 0.8V(4.9V) 1.1V(0V) 0V(0V) 2.5V(3.0V) 19 20 21 22 23 24 VOLTAGE 0V 0V 0V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 5V 10V 0V IC702 PIN NO. 1 2 3 4 5 6 7 8 VOLTAGE 0V 0V 0V -11.0 0V 0V 0V 5.58V PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 VOLTAGE 5V 0V 5V 0V 5V 5V 5V 1.2V 0.87V 4.84V 2.38V 2.06V 0V 0V 1.4V 4.89V 4.8V 0V 2.3V 0V 0V 0V 0V 4.44V 0V 0.3V 0V 0V 0V 0V 5.1V 5.1V 5.1V 4.9V 5.0V 4.9V 4.9V 0V 5V 0V 1.7V 8.0V 7.9V 8.0V 3.8V 4.89V 4.89V 4.89V 4.29V 4.29V IC852 PIN NO. 1 2 3 VOLTAGE 19.4V 0V 5.76V IC851 PIN NO. 1 2 3 VOLTAGE 19.4V 0V 5V IC704 PIN NO. 1 2 3 IC703 VOLTAGE PIN NO. 1 2 3 4 5 6 7 8 5.0V 0V 5.0V – 27 – VOLTAGE 0V 0V 0V -11.0 0V 0V 0V 5.58V PIN NO. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 IC841 PIN NO. 1 2 3 VOLTAGE 19.41V 0V 10V VOLTAGE 4.29V 4.29V 4.29V 4.29V 4.29V 4.29V 0V 0V -27.8V -27.8V 0V 0V -27.7V -27.7V -27.7V -27.7V -27.7V -27.7V -20.4V -22.1V -25.9V -27.7V -24.1V -24.4V -25.9V -22.2V -22.2V -22.3V -27.8V -27.7V -27.7V -27.7V -20.3V -24.0V -20.3V 2.38 2.58V -25.8V -25.8V -25.7V -25.7V -25.7V -25.7V -25.7V -25.7V -25.7V -25.7V -25.7V -25.7V -25.7V IC901 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 VOLTAGE 0V 0V 0V 34.4V -32.9V 0V 0V 35.4V -35.4V 0V 0V -34.0V 0V 0V 0V CD-BP160W/180W/1500W/1700W A MAIN PWB-A1 RL951 C388 C355 C357 R361 X351 R362 R356 C368 R901 C910 R919 R909 C907 R908 C915 C914 – Q901 B C E C B E C B Q903 R917 R915 C804 C917 C916 R926 C803 R801 C930 R927 – L-ch 180W/1700W ONLY CNS971 BR 2 1 RD H 1 2 3 4 Figure 28 WIRING SIDE OF P.W.BOARD (1/6) – 28 – 5 R911 R914 C931 M901 FAN MOTOR R920 1 2 3 R802 + R-ch C358 C398 R353 C369 R357 Q951 R973 Q904 + L-ch C426 C396 C356 R386 C391 R392 R391 R385 R351 C363 5 C903 C972 D971 R916 SURROUND SPEAKER R4 C374 1 2 C913 R-ch Q401 1 R972 L921 – L-ch R4 C R364 C373 C372 R913 SO901 SPEAKER TERMINAL G R395 C386 R387 R384 R383 C385 R393 C318 C313 R309 R311 B C E R953 – R-ch C371 R905 + F C344 D305 C332 L920 FRONT SPEAKER R350 D951 + L-ch CNP971 2 1 R954 R-ch C429 TP302 R363 R975 Q971 R419 C431 D403 FW951 D404 E R422 C430 R420 R421 C437 R-CH SO401 VIDEO/AUX L-CH C335 T306 C337 R355 FW951 5 4 3 2 1 VD301 R426 C438 C338 C336 R323 C339 C331 C340 CF352 R325 Q302 R314 C315 C330 100/10 R951 CNP951 C334 C367 C364 R952 IC303 C399 C366 242322212019181716151413 R370 C342 C361 R358 R365 50/9 R313 C354 1 2 3 4 5 6 7 8 9 101112 VD302 C362 C323 C314 R352 C C370 CF351 C352 C L352 1 2 3 C350 C351 CF303 C309 1 2 3 R971 D C308 C303 T303 C375 T302 C316 SW401 SPAN SELECTOR C324 VD303 R336 BF301 1 2 3 D302 R302 C311 C310 C312 ZD351 T351 B C E C971 D301 R382 TP301 T301 C393 R327 L312 CNP302 1 2 C304 1 2 IC301 AM LOOP ANTENNA JK951 HEADPHONES 9 8 7 6 5 4 3 2 1 C317 R316 HEADPHONES PWB-A3 C305 C C306 GND R322 C326 C307 SO302 FM TERMINAL Q360 B C E R375 C353 C397 R380 C395 R376 R360 2221201918171615141312 R377 C392 L351 C380 C394 R381 FM 75 OHMS IC302 C387 C381 R388 R359 1 2 3 4 5 6 7 8 9 1011 C365 C384 C382 D304 C301 B R373 R379 D303 R378 R374 R372 X352 R907 C302 6 D901 D903 CD-BP160W/180W/1500W/1700W TO DISPLAY PWB P31 9-H CNP702 1 25 25 1 R127 C127 C113 C115 R123 C904 R902 R157 Q101 E C B Q113 IC852 C105 R138 C106 7 WH BI102 C108 1 2 3 IC901 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 C107 R114 Q108 R103 BK RD BK C104 Q103 1 2 3 WH C140 R932 C905 C901 R903 C902 C103 R113 R931 R904 C936 R403 E C B 1 BK YL E C B R112 C935 R404 BK YL WH BK RD BK WH CNS102 BK 1 YL 2 WH 3 RB 4 BK 5 WH 6 GR GR Q107 E C B R104 E C102 C B Q402 R408 R936 R402 Q401 E C B R105 CNP101 3 2 1 C402 C120 R120 C118 R117 R116 C101 R102 C906 R933 R934 R407 R425 C401 R122 C112 C117 24 22 20 18 16 14 12 10 8 6 4 2 25 23 21 19 17 15 13 11 9 7 5 3 1 CNP401 C403 R401 R121 C121 R119 C119 R110 C123 C139 C137 13 14 15 16 17 18 19 20 21 R118 22 23 C114 24 R109 TO TAPE2 RECORD/ PLAYBACK HEAD R107 E C B Q105 R106 E C B Q104 R137 R108 E C B C148 Q106 R148 R149 R147 L104 E C B C142 C141 R145 R144 R101 C143 R125 R124 R130 R128 C126 R126 C116 IC101 R143 C406 12 11 10 9 8 7 6 5 4 3 2 1 C134 C144 C128 C145 C133 R131 R424 C418 R135 Q111 R151 C135 R133 C129 R129 5 C132 R134 C130 C122 B C E R111 Q102 R410 C420 C424 C436 C428 C422 C414 C412 C408 C410 C404 R416 BI402 R418 242322212019181716151413 R140 C131 C136 R141 Q109 R115 C413 R417 IC401 BK WH BK WH RD 1 C427 R132 R136 R139 C435 C425 R142 B C E C138 P33 11-E TO TAPE1 PLAYBACK HEAD Q114 P33 10-E R146 C419 C421 C417 C409 C411 C407 C388 Q110 C150 C423 1 2 3 4 5 6 7 8 9 101112 C405 CNP11 R423 R415 R409 TO CD SERVO PWB P32 4-A CNS402 RD 1 WH 2 BK 3 WH 4 BK 5 FC701 FROM POWER TRANSFORMER E C B Q112 3 2 1 P33 7-C 3 2 1 C813 ZD802 C854 F803 T2A L 250V F802 T4A L 250V R805 ZD801 Q801 C808 D803 D807 D805 C807 C801 R806 D808 D804 C806 C802 R803 D806 E C B C805 2 3 BR C812 C811 C809 1 F801 T4A L 250V E Q831 C IC841 C843 C831 COLOR TABLE R807 B D802 C832 D801 ZD803 R910 D902 C842 B C E Q902 E C B D901 03 C834 R841 R833 R831 R832 R912 C833 R906 911 1 2 3 4 5 6 7 8 C855 C851 C908 907 2 3 C852 C841 C912 1 R851 C909 R920 C911 CNP802 D851 C853 R918 IC851 R919 R804 C810 BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK (281) (230) 7 8 9 10 Figure 29 WIRING SIDE OF P.W.BOARD (2/6) – 29 – 11 12 CD-BP160W/180W/1500W/1700W DISPLAY PWB-A2 RX701 1 2 3 C609 C631 C632 Q601 Q603 Q602 R627 E C B R609 R619 C623 R625 R605 D601 C601 XL701 C612 R626 R603 R710 R715 R693 R694 SW621 FAST FORWARD R701 R707 R618 SW615 VOLUME DOWN R668 C613 R607 R608 R617 C606 R614 D603 C622 C633 C604 C603 C610 R613 1 C605 2 3 R604 4C602 IC702 8 7 6 5 R623 D602 R624 R620 C608 R615 R610 C607 R612 R713 IC703 C614 1 8 7 2 6 3 5 4 C611 D R679 R680 D604 ZD601 100 1 C624 SW611 SW614 DIMMER VOLUME UP E C B R611 R667 E C B 15 1 R689 C621 B R601 R606 R616 R688 R621 C 4 5 6 7 8 9 10 11 12 13 14 R684 R683 R622 R682 R681 R685 R602 R677 R687 R686 1 2 3 R678 R692 R691 R690 A E C B B C E C617 Q607 G SW610 OPEN/ CLOSE E C B Q605 13 1 D614 R717 SW609 DISC SKIP R720 13 1 TO TAPE MECHANISM PWB P33 9-A H 1 2 D613 COLOR TABLE Q606 E C B SW629 REVERSE SW622 PLAY/ REPEAT FC702 Q604 CNP703 2 4 6 8 10 12 1 3 5 7 9 11 13 C620 R651 D611 R652 R649 R636 R638 R637 SW612 X-BASS/ DEMO R662 F SW613 EQUALIZER SW625 REC/ PAUSE R676 R650 R698 R660 R719 C618 Q608 E C B R695 R655 R726 D615 R712 R658 E 3 4 Figure 30 WIRING SIDE OF P.W.BOARD (3/6) – 30 – BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 5 6 CD-BP160W/180W/1500W/1700W TO CD SERVO PWB P32 4-A CNP12 10 9 8 7 6 5 4 3 2 1 BK WH BK WH BK WH BK WH BK RD CNS701 10 1 LED722 BI701 C621 37 38 39 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 D609 80 81 70 95 R644 R643 R642 75 90 65 R634 R635 R633 R629 R632 R661 SW603 TIMER/ SLEEP 1 2 3 Q609 R708 C626 SW628 TUNER (BAND) D612 SW616 CD R630 SW623 STOP R714 R722 SW627 VIDEO/ AUX R706 R666 CNP702 2 4 6 8 10 12 14 16 18 20 22 24 1 3 5 7 9 11 13 17 15 19 21 23 25 R718 W629 EVERSE R697 R724 R703 R709 R676 R656 SW617 TAPE SW626 TUNING/ TIME UP R721 SW624 REVERSE PLAY R699 1 25 1 25 FC701 SW618 TUNING/TIME DOWN CNP401 FROM MAIN PWB P29 8-A 7 8 9 10 Figure 31 WIRING SIDE OF P.W.BOARD (4/6) – 31 – 11 D620 3 2 1 D616 C630 SW619 MEMORY /SET IC704 C627 D621 D617 R723 R659 R702 R654 C625 R705 L601 R725 R674 R663 R672 R675 R653 SW620 REWIND SW602 CLOCK R716 R669 R670 R673 R665 R664 R710 R671 30 31 R704 25 35 R696 R700 C629 40 R711 20 51 50 D618 55 45 15 C628 IC701 60 5 10 R668 SW601 ON/STAND-BY C616 R648 R647 R646 100 1 R645 FL701 85 12 CD-BP160W/180W/1500W/1700W R71 R78 R73 R74 R75 R76 R77 R72 R19 C23 R12 C80 R80 C82 55 30 50 CNP3 6 5 4 3 2 1 1 6 5 4 3 2 1 C38 10 XL1 40 41 R95 R94 R17 R16 R20 45 C34 35 9 C56 CNP4 C39 R81 C43 R83 22 C50 R48 21 R46 65 64 60 C30 25 24 25 R45 Q2 70 IC2 20 3 12 11 75 R82 C40 R84 R8 C71 C78 C73 C74 C75 C76 C77 C72 Q1 R58 C17 C21 R67 R68 10 C31 IC3 1 2 3 30 R22 C46 D21 D22 35 10 E L61 15 R21 R40 40 5 20 R79 5 R38 C47 42 1 C49 C11 C12 R7 C28 R44 R35 R39 15 C42 R53 R51 R54 2 D R13 1 80 R43 8 7 C24 C19 C25 R11 C81 R15 C27 C29 C41 CNP1 L62 C20 C22 D93 B C E R56 C ZD61 R10 C26 R55 R52 4 C13 16 C6 7 6 5 4 3 2 1 C44 20 15 C54 C64 R5 R6 25 1 2 3 4 5 6 7 8 9 10 CNP12 C18 C14 IC1 10 1 2 3 4 5 CNP11 R3 C7 CNP2 R50 30 5 C8 C83 R4 13 R25 1 Q3 C55 B R47 E C B CNS701 R42 C53 8 7 6 5 4 3 2 1 CNS402 C45 C51 C52 P31 12 - A TO DISPLAY PWB R14 5 CD SERVO PWB-B A P29 10 - A TO MAIN PWB 6 CNS3A 654 321 WH WH GR WH GR WH RD PICKUP UNIT(306) 654 321 F CNS3B CNS1A CNS1B 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 RD WH GY WH GY WH GY WH 1 2 3 4 5 6 7 8 1 654 321 CNP3A 1 8 SW4 PICKUP IN + CNS2A 7 M2 SLED MOTOR RD WH BL WH BL WH BL + 1 2 3 4 5 6 7 - G CD MOTOR PWB-C CNS2B - M1 SPINDLE MOTOR H • The numbers 1 to 13 are waveform numbers shown in page 35. 1 2 3 4 Figure 32 WIRING SIDE OF P.W.BOARD (5/6) – 32 – 5 6 CD-BP160W/180W/1500W/1700W P30 4-H TO DISPLAY PWB CNP703 TAPE MECHANISM ASSEMBLY 13 1 FC702 TAPE MECHANISM PWB-D1 13 1 1 3 5 7 9 11 13 2 4 6 8 10 12 1 4 TAPE MOTOR B A + - SOLENOIDE SOLENOIDE TAPE MOTOR TO MAIN PWB P29 12-E CNP802 TAPE 1 PLAYBACK HEAD TAPE 2 RECORD/PLAYBACK/ERACE HEAD BL 3 4 5 SO801 AC INPUT SOCKET AC 110/127/ 220/230-240V, 50/60Hz SW801 VOLTAGE SELECTOR RECORD/PLAYBACK/ ERACE HEAD PWB-D4 GR RD BK WH BR YL 2 RD RD PT801 POWER TRANSFORMER 1 BK RD WH BR BK BR YL YL RD BL RD 1 2 3 4 5 6 7 8 3 2 1 1 127V 110V 220V 230-240V CNS101 654321 2 3 CNP101 4 TO MAIN PWB P29 12-E CNS102 P29 12-D TO MAIN PWB 5 CNP801 SOCKET PWB-A4 CNS4 CD T/T UP/DOWN MOTOR PWB-E WH BK WH BK WH RD 6 5 4 3 2 1 COLOR TABLE M3 T/T UP/DOWN MOTOR 6 1 BI4 + – SW3 DISC NUMBER 7 SW1 OPEN/ CLOSE SW2 CLAMP 8 9 10 Figure 33 WIRING SIDE OF P.W.BOARD (6/6) – 33 – BR BROWN RD(R) RED OR ORANGE YL YELLOW GR GREEN BL BLUE VL VIOLET GY GRAY WH(W) WHITE BK BLACK PK PINK 11 12 CD-BP160W/180W/1500W/1700W NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means micro-micro-farad and the unit of the capacitor without such a symbol is microfarad. As to electrolytic capacitor, the expression “capacitance/withstand voltage” is used. (CH), (TH), (RH), (UJ): Temperature compensation (ML): Mylar type (P.P.): Polypropylene type • Schematic diagram and Wiring Side of P.W.Board for this model are subject to change for improvement without prior notice. REF. NO DESCRIPTION • The indicated voltage in each section is the one measured by Digital Multimeter between such a section and the chassis with no signal given. 1. In the tuner section, ( ) indicates AM < > indicates FM stereo 2. In the main section, a tape is being played back. 3. In the deck section, a tape is being played back. ( ) indicates the record state. 4. In the power section, a tape is being played back. 5. In the CD section, the CD is stopped. • Parts marked with “ ”( ) are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. POSITION REF. NO DESCRIPTION POSITION SW1 OPEN/CLOSE ON—OFF SW616 CD ON—OFF SW2 CLAMP ON—OFF SW617 TAPE ON—OFF TUNING /TIME DOWN ON—OFF SW3 DISC NUMBER ON—OFF SW618 SW4 PICKUP IN ON—OFF SW619 MEMORY/SET ON—OFF SW401 SPAN SELECTOR 50/9—100/10 SW620 REWIND ON—OFF SW601 ON/STAND BY ON—OFF SW621 FAST FORWARD ON—OFF SW602 CLOCK ON—OFF SW622 PLAY/REPEAT ON—OFF SW603 TIMER/SLEEP ON—OFF SW623 STOP ON—OFF SW609 DISC SKIP ON—OFF SW624 REVERSE PLAY ON—OFF SW610 OPEN/CLOSE ON—OFF SW625 REC/PAUSE ON—OFF SW611 DIMMER ON—OFF SW626 TUNING/TIME UP ON—OFF SW612 X-BASS/DEMO ON—OFF SW627 VIDEO/AUX ON—OFF ON—OFF SW628 TUNER (BAND) ON—OFF SW613 EQUALIZER SW614 VOLUME UP ON—OFF SW629 REVERSE MODE SW615 VOLUME DOWN ON—OFF SW801 VOLTAGE SELECTOR FRONT VIEW E C B (S) (G) (D) (1) (2) (3) KTA1266 GR KTA1273 Y KRC102 M KTC3203 Y KRC104 M KTC3199 GR KTA1271 Y KRC107 M KTA1274 Y KTC3194 Y 2SC1845 F ON—OFF 110—127— 220—230-240 FRONT VIEW FRONT VIEW B C E KTC2026 4204SRT7 Figure 34 TYPES OF TRANSISTOR AND LED – 34 – KDV147B SVC348S CD-BP160W/180W/1500W/1700W WAVEFORMS OF CD CIRCUIT Stopped CH1=500mV DC 10:1 CH3=500mV DC 10:1 T Stopped CH1=500mV DC 10:1 500ms/div (500ms/div) NORM:20kS/s CH3=1V DC 10:1 1999/04/05 17:33:17 CH4=1V 500ms/div (500ms/div) DC 10:1 NORM:20kS/s PDO1 1 7 FDO IC2 24 FDO 1 IC2 1 PDO1 3 4 8 TDO 2 IC2 23 TDO =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000V CH2 : 0.0V CH3 : 0.000V CH4 : 0.00V Stopped CH1=500mV DC 10:1 IC2 24 FDO 3 IC2 72 DEF 4 IC1 18 TE, IC2 16 TE PDO2 T 3 1 CH1 v/DIV 500mV 1 IC2 2 OD02 CH2=10V DC 10:1 =Record Length= Main : 100K Zoom : 2K CH3=1V DC 10:1 IC2 24 FDO =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0ns Hold off : 0.2us FDO 1 CH1 v/DIV 500mV =Filter= Smoothing : ON BW : FULL Stopped CH1=2V DC 10:1 500ms/div (500ms/div) NORM:20kS/s =Offset= CH1 : 0.000V CH2 : 0.0V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K T =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0ns Hold off : 0.2us 1999/04/07 09:25:28 500ns/div (500ns/div) NORM:200MS/s FDO T 1 T 2 DRF 9 IC2 37 DOUT 1 DOUT TE 3 CH Position To -3div -1div 0div +1div +3div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000V Main : 100K BW : FULL CH2 : 0.0V Zoom : 2K CH3 : 0.00V CH4 : 0.00V CH2 Position 0.20div =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0ns Hold off : 0.2us =Filter= Smoothing : ON BW : FULL Stopped CH1=2V DC 10:1 10 =Offset= CH1 : 0.00V CH2 : 0.00V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 1K Zoom : 100 T CH2=2V DC 10:1 CH3=2V DC 10:1 =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887ms Hold off : 0.2us 1999/04/05 20:50:17 5us/div (5us/div) NORM:100kS/s IC2 57 DATACK 1 LRSY 5 IC1 27 RF 11 IC2 58 DATA 2 DATACK 12 IC2 59 16M Vp-p=1.0V~1.3V 0.5mV/div,0.5µsec/div 3 IC2 72 DEF CH2=1V DC 10:1 4 T 1 13 =Offset= CH1 : 0.0V CH2 : 0.00V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K T =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924ms Hold off : 0.2us T CH2=200mV DC 10:1 =Record Length= Main : 5K Zoom : 100 CH3=1V DC 10:1 =Trigger= Mode : AUTO Type : EDGE CH3 Delay : 0.0ns Hold off : 0.2us 1999/04/05 20:26:47 500ms/div (500ms/div) NORM:20kS/s FDO 1 1999/04/07 09:51:15 500ms/div (500ms/div) NORM:20kS/s CH2=500mV DC 10:1 2 1 IC1 18 TE, IC2 16 TE TE 3 SPDO =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000V CH2 : 0.000V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K IC1 13 EFBL, IC2 22 TBLO EFBL 2 CH2 v/DIV 200mV =Filter= Smoothing : ON BW : FULL FDO IC2 25 SPDO IC2 24 FDO DRF T 6 =Offset= CH1 : 0.00V CH2 : 0.00V CH3 : 0.00V CH4 : 0.00V 2 Stopped CH1=200mV DC 10:1 IC2 24 FDO CH3 v/DIV 2V T Stopped CH1=500mV DC 10:1 100ms/div (100ms/div) NORM:100kS/s TE =Filter= Smoothing : ON BW : FULL 1 DATA =Filter= Smoothing : ON BW : FULL 1 4 3 T Stopped CH1=10V DC 10:1 IC1 18 TE, IC2 16 TE T =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924ms Hold off : 0.2us – 35 – =Offset= CH1 : 0.000V CH2 : 0.000V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2k =Trigger= Mode : SINGLE Type : EDGE CH1 Delay : 0.0ns Hold off : 0.2us CD-BP160W/180W/1500W/1700W TROUBLE SHOOTING When the CD does not function When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items. Remove the cabinet and follow the trouble shooting instructions. "Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attempting any adjustment make certain that the lens is clean. If not, clean it as mentioned below." Turn the power off. Gently clean the lens with a lens cleaning tissue and a small amount of isopropyl alcohol. Do not touch the lens with the bare hand. 1. Parts code UDSKA0004AFZZ CD optical pickup Lens cleaner disc HOW TO USE 1. Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to the brush on the CD cleaner disc which has the mark next to it. 2. Place the CD cleaner disc onto the CD disc tray with the brush side down,then press the play button. 3. You will hear music for about 20 seconds and the CD player will automatically stop. If it continuous to tum, press the stop button. Cleaner Fluid CAUTION The CD lens cleaner should be effective for 30-50 operations, however if the brushes become worn out earlier then please the cleaner disc. If the CD cleaner brushes become very wet then wipe off any excess fluid with a soft cloth. Do not drink the cleaner fluid or allow it to come in contact with the eyes. In the event of this happening then drink and / or rines with clean water and seek medical advice. The CD cleaner disk must not be used on car CD players or on computer CD ROM drives. All rights reserved.Unauthorized duplicating, broadcasting and renting this product is Cleaner disc When a CD cannot be played 1. "E-CD01" is displayed. (1) Check the power to IC2 (LC78641E), the presence of the clock signal (16.93 MHz) and the status of the RESET terminal (pin 71 on IC2). (2) Did the pickup move to the PICKUP-IN Switch (SW4) position? If (1) and (2) are OK, check the system microcomputer (especially the communication line with the DSP). 2. Pressing the CD operation key is accepted, but playback does not occur. (1) Focus-HF system check (2) Tracking system check (3) Spin system check (4) PLL system check (5) Others – 36 – CD-BP160W/180W/1500W/1700W (1) Focus-HF system check Stopped CH1=500mV DC 10:1 Although a CD is inserted and the cover is closed, "NO DISC" is displayed. CH3=500mV DC 10:1 T 500ms/div (500ms/div) NORM:20kS/s FDO 1 Press the OPEN/CLOSE switch (SW1) without inserting a disc, and try starting the playback operation. TDO 3 CH1 v/DIV 500mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000V CH2 : 0.0V CH3 : 0.000V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0ns Hold off : 0.2us Figure 37-1 1. Did the pickup move to the PICKUP-IN Switch (SW4) position? No Sled motor (M2) Yes No 2. Does the focus (lens) move up and down? (Waveform drawing 37-1). Check the focus peripheral circuit. Yes No 3. Is the laser lit? Check the laser diode driver Q3 peripheral circuit. Yes No 4. Is the turntable rotating? Spindle motor (M1). When a disc is loaded, start playback operation. 1. Is focus servo activated? (Waveform drawing 37-2) No Yes 2. Does DRF change from "L" to "H"? No Is the disc rotating? 3. Is the HF waveform normal? (Waveform drawing 37-3) CH2=10V DC 10:1 CH3=1V DC 10:1 No Check the spin system. If the disc is spinning and a HF waveform is generated, DRF will go H. Yes Stopped CH1=500mV DC 10:1 Pins 1~11 on IC1 Check the laser diode driver Q3 peripheral circuit. Focus error circuit (pins 20 and 21 on IC1) No If the level is not normal, check around pins 27~29 on IC1. 500ms/div (500ms/div) NORM:20kS/s FDO 1 T 2 DRF TE 3 CH Position To -3div -1div 0div +1div +3div =Filter= =Offset= =Record Length= Smoothing : ON CH1 : 0.000V Main : 100K BW : FULL CH2 : 0.0V Zoom : 2K CH3 : 0.00V CH4 : 0.00V CH2 Position 0.20div =Trigger= Mode : AUTO Type : EDGE CH1 Delay : 0.0ns Hold off : 0.2us Vp-p=1.0V~1.3V 0.5mV/div,0.5µsec/div Figure 37-2 Figure 37-3 – 37 – CD-BP160W/180W/1500W/1700W (2) Tracking system check Check the TE waveform at pin 18 on IC1. Yes If the waveform shown in Figure 38-1 appears and soon after NO DISC appears. No "Initialization" is possible, but play is not possible. Yes No "Initialization" is not possible. The tracking servo is not activated. Check the peripheral circuits at pins 18 and 19 on IC1, pin 23 on IC2, and CNS1A/B. A normal jump operation cannot be completed or the beginning of the track cannot be found. Check the around pin 23 on IC2. Data cannot be read. Check the VCO-PLL system. T Stopped CH1=10V DC 10:1 CH2=1V DC 10:1 100ms/div (100ms/div) NORM:100kS/s TE 2 T 1 DRF =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.0V CH2 : 0.00V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.924ms Hold off : 0.2us Figure 38-1 (3) Spin system check Press the OPEN/CLOSE switch without inserting a disc, and then try starting the play operation. Yes The spin driver circuit is OK. 1. The turntable rotates a little. (Waveform drawing 38-2) No 2. The turntable doesn't rotate. Check around pin 25 on IC2, pins 15 and 16 on IC3, and CNS3A/B. Stopped CH1=200mV DC 10:1 T 1999/04/07 09:51:15 500ms/div (500ms/div) NORM:20kS/s CH2=500mV DC 10:1 T FDO 2 1 SPDO =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000V CH2 : 0.000V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K Figure 38-2 – 38 – =Trigger= Mode : NORMAL Type : EDGE CH2 Delay : 2.924ms Hold off : 0.2us CD-BP160W/180W/1500W/1700W (4) PLL system check Stopped CH1=500mV DC 10:1 When a disc is loaded, start play operation. CH3=1V DC 10:1 1999/04/05 17:33:17 CH4=1V 500ms/div (500ms/div) DC 10:1 NORM:20kS/s PDO1 3 4 The HF waveform is normal, but the TOC data cannot be read. PDO2 T FDO 1 Check the PDO waveform. (Figure 39-1) CH1 v/DIV 500mV =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.000V CH2 : 0.0V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 100K Zoom : 2K =Trigger= Mode : AUTO Type : EDGE CH2 Delay : 0.0ns Hold off : 0.2us Check around pins 1~6 on IC2. Figure 39-1 (5) Others The HF waveform is normal and the time is displayed normally, but no sound is produced. Or the sound has dropouts. No Is pin 35 (C2F) on IC2 "L"? There are too many error flags on a damaged disc which makes error correction impossible. Yes 1. When playing at normal speed Check the peripheral circuit at pin 37 (DOUT) on IC2 and the waveform (Figure 39-2). Check again using a known good disc. If OK, check the Unit. Stopped CH1=2V DC 10:1 T 1999/04/07 09:25:28 500ns/div (500ns/div) NORM:200MS/s T 1 DOUT =Filter= Smoothing : ON BW : FULL =Offset= CH1 : 0.00V CH2 : 0.00V CH3 : 0.00V CH4 : 0.00V =Record Length= Main : 1K Zoom : 100 =Trigger= Mode : NORMAL Type : EDGE CH1 Delay : 2.887ms Hold off : 0.2us Figure 39-2 – 39 – CD-BP160W/180W/1500W/1700W FUNCTION TABLE OF IC IC1 VHiLA9235M/-1: Servo Amp. (LA9235M) FIN1 1 ODRV LA9235M REF 30 VCC 29 RFSW REF FIN2 2 AGCON REF 28 RF- TIN1 3 REF PH REF TIN2 4 27 RF 26 NC REF 24 BH REF1 5 ODRV REF 23 NC PH/BH 22 RFEV REF VREF 6 LDS 7 25 PH BH 21 FE- LPF APC LDD 8 20 FE REF REF GND 9 LDOF 10 ODRV 11 ODRV AGON 12 AGCON EFBL 13 TESO 14 18 TE REF REF REF REF REF LPF TES1 15 19 TE- LPF 17 HFL 16 TEST 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 EFMO DEFECT FSEQ V/P CONT7 CONT6 VSS VDD DEF RES WRQ INT DO DI CL CE IC2 VHiLC78641E-1: Servo/Signal Control (LC78641E) LC78641E 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SPDO SLDO FG(D_Vref) LASER CONT1 CONT2 CONT3 CONT4 CONT5 PCK C2F VDD DOUT FSX EFLG TEST PD01 PD02 VVSS PCKIST VVDD FR HFL SLCIST SLCO EFMIN JITTV JITTC BH PH(RFENV) FE TE VREF ADAVDD ADAVSS PHREF BHREF TBLO TDO FDO Figure 40 BLOCK DIAGRAM OF IC – 40 – 64 63 62 61 61 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 SBCK PW SBSY SFSY 16M DATA DATACK LRSY ASDFIN ASDACK ASLRCK XVSS XOUT XIN XVDD RVDD RCHO RVSS LVSS LCHO LVDD MUTER MUTEL EMPH CD-BP160W/180W/1500W/1700W IC2 VHiLC78641E-1: Servo/Signal Control (LC78641E) (1/2) Pin No. Terminal Name Input/Output Setting in Reset 1 PD01 Output – 2 PD02 Output – Phase-comparison output terminal for built-in VOC control. Rough servo : OFF, phase servo : ON. 3 VVSS – – Ground terminal for built-in VCO. 4 PCKIST AI – Resistor terminal for setting the PDO output current. 5 VVDD – – Power terminal for built-in VCO. 6 FR AI – 7 HFL Input – Mirror detection signal input terminal. 8 SLCIST AI – For slice level control Function For PULL Phase-comparison output terminal for built-in VOC control. Resistor terminal for setting the VCO frequency range. Resistance connection terminal for current adjustment of SLCO output. 9 SLCO Output – Control output. 10 EFMIN Input – EFM signal input terminal. 11* JITTV Output Unfixed 12 JITTC Output – Jitter detection/adjustment terminal. Jitter detection/monitor terminal. 13 BH Input – BH signal input terminal. A/D input. 14 PH(RFENV) Input – PH signal or RFENV signal input terminal. A/D input. 15 FE Input – FE signal input terminal. A/D input. 16 TE Input – TE signal input terminal. A/D input. 17 VREF Input – VREF signal input terminal. A/D input. 18 ADAVDD – – AD for servo, D/A power terminal. 19 ADAVSS – – AD for servo, D/A ground terminal. 20* PHREF Output (1/2VDD) PH reference output terminal. D/A output. 21* BHREF Output (1/2VDD) BH reference output terminal. D/A output. 22 TBLO Output (1/2VDD) Output terminal for tracking balance. D/A output. 23 TDO Output (1/2VDD) Output terminal for tracking control. D/A output. 24 FDO Output (1/2VDD) Output terminal for focus control. D/A output. 25 SPDO Output (1/2VDD) Output terminal for spindle control. D/A output. 26 SLDO Output (1/2VDD) Output terminal for sled control. D/A output. 27* FG(D_Vref) Input – FG signal input terminal. (When not used,connect to 0V) 28 LASER Output L LASER ON/OFF control terminal. 29 CONT1 In/Output Input mode General purpose input/output terminal 1. Controlled with serial data command 30 CONT2 In/Output Input mode General purpose input/output terminal 2. from microcomputer. When not used, 31 CONT3 In/Output Input mode General purpose input/output terminal 3. set it as the input terminal and 32 CONT4 In/Output Input mode General purpose input/output terminal 4. open it by connecting to 0V, or set it 33 CONT5 In/Output Input mode General purpose input/output terminal 5. as the output terminal and open it. 34* PCK Output H 35* C2F Output H C2 flag output terminal. 36 VDD – – Power terminal of digital system. 37* DOUT Output L Output terminal of digital OUT. (EIAJ format) 38* FSX Output L Output terminal of synchronous signal of 7.35kHz divided from quartz oscillation. 39* EFLG Output L C1,C2 correct monitor terminal. 40 TEST Input – Input terminal for test. Surely connected to 0V. 41* EMPH In/Output Input mode 42* MUTEL Output H Mute output terminal for L channel. 43* MUTER Output H Mute output terminal for R channel. Clock monitor terminal for EFM data replay. 4.3218MHz as phase clock. Emphasis terminal. After resetting, it is configured as an input terminal. It can be controlled from the outside. It is also becomes a emphasis monitor terminal under command control. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 41 – CD-BP160W/180W/1500W/1700W IC2 VHiLC78641E-1: Servo/Signal Control (LC78641E) (2/2) Pin No. Terminal Name Input/Output Setting in Reset 44 LVDD – – 45 LCHO Output 1/2VDD 46 LVSS – – 47 RVSS – – 48 RCHO OUTPUT 1/2VDD 49 RVDD – – 50 XVDD – – For quartz Power terminal for quartz oscillation. 51 XIN Input Oscillation oscillation Ground terminal of 16.9344MHz quartz oscillation. 52 XOUT Output Oscillation 53 XVSS – – 54 ASLRCK Input – For anti L/R clock input terminal. (When not used,connect to 0V) 55 ASDACK Input – shock mode Bit clock input terminal. (When not used,connect to 0V) 56 ASDFIN Input – 57* LRSY Output L For digital L/R clock output terminal. 58* DATACK Output L data output Bit clock output terminal. 59* DATA Output L 60* 16M Output Clock output 61* SFSY Output L Output terminal of synchronous signal of subcode frame. It drops when subcode stand by. 62* SBSY Output L Output terminal of synchronous signal of subcode block. 63* PW Output L Output terminal of subcodes P,A,R,S,T,U and W. 64 SBCK Input – Clock input terminal to read subcode. (When not used,connect to 0V) 65 CE Input – For Function L channel Power terminal for L channel. D/A converter L channel output terminal. Ground terminal for L channel. Surely connected to 0V. R channel Ground terminal for R channel. Surely connected to 0V. D/A converter R channel output terminal. Power terminal for R channel. Ground terminal for quartz oscillation. Surely connected to 0V. L/R channel data input terminal. (When not used,connect to 0V) L/R channel data output terminal. 16.9344MHz output terminal. Chip enable signal input terminal. 66 CL Input – microcomputer 67 DI Input – interface Data transmission clock input terminal. 68 DO Output L Data output terminal. 69 INT Output H Interruption signal output terminal. 70 WRQ Output H 71 RES Input – 72 DEF Output L Focus ON detection terminal. 73 VDD5V – – Power terminal for microcomputer interface. 74 VSS – – Ground terminal of digital system. Surely connected to 0V. 75 CONT6 In/Output Input mode General purpose input/output terminal 6. Controlled with serial data command from microcomputer. When not used, 76 CONT7 In/Output Input mode General purpose input/output terminal 7. set it as the input terminal and open it by connecting to 0V, or set it as the output terminal and open it. 77* V/P Output H Monitor output terminal for automatic switch of rough servo/phase control. "H" for rough servo, and "L" for phase servo. 78* FSEQ Output L Output terminal synchronous signal detection. "H" is output when synchronous signal detected by EFM signal matches synchronous signal internally generated. 79 DEFECT In/Output Input mode Defect terminal. After resetting, it is configured as an input terminal. It can be controlled from the outside. It also becomes a defect monitor terminal under command control 80* EFMO Output Unfixed Data input terminal. Interruption signal output terminal. Reset input terminal of LC78640. When turning on power, set it at "L". EFM signal output terminal. In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. Be sure to supply the same potential to each power terminal. (VVDD,ADAVDD,VDD,LVDD,RVDD,XVDD) Terminal witch is controlled by the power terminal (VDD5V) for a microcomputer interface : CE (65pin), CL (66pin), DI (67pin), DO (68pin), INT (69pin), WRQ (70pin), RES (71pin), DRF (72pin), CONT6 (75pin), CONT7 (76pin) – 42 – CD-BP160W/180W/1500W/1700W IC701 RH-iX0328AWZZ: System Microcomputer (IX0328AW) (1/2) Pin No. Port Name Terminal Name Input/Output 1 VDD VDD — (+) Power supply 2* P37 — — GND 3* P36 S-BUSY Output Commintcate to mpeg ucom 4 P35 T–BTAS Output Tape record bias 5 P34 T–T1/T2 Output Tape T1/T2 change 6 P33 REC/PLAY Output Tape rec/play change 7 P32 RES OUT Output CD DSP reset & mpeg ucom reset 8 P31 DRF 9 P30 10 RESET 11 X2 X2 Output Main clock 12 X1 X1 Input Main clock Function Input CD RF level detection WRQ Input CD DSP write requset RESET Input Reset 13 Vpp/IC VPP/IC — GND 14* XT2 XT2 — Open 15 P04 CD INT 16 VDD VDD 17 P27 CD CLK Output CD DSP clock/mpeg ucom clock 18 P26 CD DI Outout CD DSP command/mpeg ucom comma 19 P25 CD DO Input 20 P24 CD CE Output CD DSP CE output 21 P23 CE Output CE output 22 P22 CLK Output Clockoutput 23 P21 DI Output Data output 24 P20 DO Output Data input 25 AVss AVSS 26 ANI7 P17 TUN SM M–BUSY 27 ANI6 NO USE Input GND 28 ANI5 SPEANA 2 Input Speana data input 16 KHz 29 ANI4 SPEANA 1 Input Speana data input 1 KHz 30 ANI3 SPEANA 0 Input Speana data input 63 KHz 31-33 ANI2-ANI0 KEY2-KEY0 Input 34 AVDD AVDD 35 AVREF AVref 36 INTP3 SYS STOP 37 P02 SP_RLY Output 38 INTP1 NO USE Input GND 39 INTP0 REMOCON Input Remocon input 40 Vss VSS — Ground voltage 41 P74 SMUTE Output System mute control 42 P73 T_SOL_B Output Tape2 solenoid control 43 P72 T_SOL_A Output Tape1 solenoid control 44 P71 T_MOTOR Output Tape motor control 45 P70 TIMER LED Output Timer LED control 46 VDD VDD — (+) Power supply 47 P127 AC RLY_CONT Output AC relay control 48* P126 SPRLY Output 49 P125 SPK_DET Input Speaker output detdction 50 P124 T1 RUN Input Tape1 run pulse input 51 P123 T2 RUN Input Tape2 run pulse input 52 P122 CD CLAMP Intput CD changer clamp switch 53 P121 PLAY SW_A Input Play switch for Tape1 Input CD DSP interrupt — (+) Power supply — Input Input — CD DSP code Q out/mpeg ucom data input Analog ground Tuner signal meter input Commintcate to mpeg ucom m_busy Key input Analog VDD — Analog ref voltage Input System stop input Speaker output relay control Speaker output relay control In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 43 – CD-BP160W/180W/1500W/1700W IC701 RH-iX0328AWZZ: System Microcomputer (IX0328AW) (2/2) Pin No. Port Name Terminal Name 54 P120 PLAY SW_B Input Play switch for Tape2 55 P119 PPA Input Tape2 A–side full proof 56 P118 FPB Input Tape2 B_side full proof 57 P117 MIC IN Input MIC switch 58 P116 KARAOKE LATCH Output Output 59 P115 DISTOUT/SW OUT 60* FIP39 SPN 61*,62* Input/Output Function Karaoke latch Distnation output Input Tuner span change FIP38-FIP37 NO USE Input Open 63-66 FIP36-FIP33 P22-P19 Output FL display driver 67-70 FIP32-FIP29 P18-P15 P103-P100 DIST3-DIST0 Output Input FL display driver Distination input 71-78 FIP28-FIP21 P14-P7 Output FL display driver 79 VLOAD 80-85 FIP20-FIP15 P6-P1 VLOAD 86*-89* FIP14-FIP11 –– 90-100 FIP30-FIP0 G11-G1 –– Output Input Output FL driver (–) power supply.–30V FL display segment Open FL diaplay segment driver In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. IC3 VHiM63001FP-1: Focus/Tracking/Spin/Sled Driver (M63001FP) Terminal Name 1 2 3* 4 5 6 7 8-14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29-35 36* 37* 38 39 40 41 42 TO FD FO FO+ FOTR+ TRGND SLSL+ SLDO VCC1 STANDBY VRFE MUTE IN5IN5+ VCC2 SPO SPDO SP+ SPVCC3 GND OUT5+ OUT5LOADIING M+ LOADIING MVCC4 LD_MLD_M+ Function CH2 inverted input. CH1 inverted input. CH1 output offset control. CH1 inverted output. CH1 non-inverted output. CH2 inverted output. CH2 non-inverted output. GND CH3 non-inverted output. CH3 inverted output. CH3 inverted input. Power supply 1 (CH1, CH2, CH3) STANDBY signal input. CH1-CH4 Reference voltage input. Mute signal input (CH6). CH5 inverted input. CH5 non-inverted input. Power supply 2 (CH4). CH4 inverted input. CH4 inverted output. CH4 non-inverted output. Power supply 3 (CH5). GND CH5 non-inverted output. CH5 inverted output. CH6 non-inverted output. CH6 inverted output. Power supply 4 (CH6). CH6 inverted input. CH6 non-inverted input. TO 1 42 LD_M+ FD 2 41 LD_M– FO 3 40 VCC4 FO+ 4 39 LOADING M– FO– 5 38 LOADING M+ TR+ 6 37 OUT5– TR– 7 36 OUT5+ 8 35 9 34 10 GND 11 12 M63001FP Pin No. 33 32 31 13 30 14 29 SL– 15 28 VCC3 SL+ 16 27 SP– SLDO 17 26 SP+ VCC1 18 25 SPO SPDO STANDBY 19 24 VCC2(SPN) VREF 20 23 IN5+ MUTE 21 22 IN5– Figure 44 BLOCK DIAGRAM OF IC In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside. – 44 – GND CD-BP160W/180W/1500W/1700W CLK VDD 1 24 23 CCB INTERFACE LTRE 6 22 21 ROUT 20 RBASS 0.1uF CONTROL CIRCUIT CONTROL CIRCUIT LBASS 5 0.1uF CONTROL CIRCUIT LOUT 4 VREF DI 2 RVref CE 3 LVref VSS IC401 VHiLC75341/-1: Audio Processor (LC75341) 19 RTRE 18 RIN LIN 7 LSEL0 8 L3 L2 L1 R1 R2 R3 R4 R3 R2 R4 L4 RSEL0 16 RIN 15 RTRE 14 RBASS 13 ROUT 12 VREF 11 VDD 10 CLK 9 R1 Video Tape Tuner CD 17 RSEL0 24 23 22 21 20 19 18 17 16 15 14 13 9 LSEL0 L4 10 11 12 Figure 45 BLOCK DIAGRAM OF IC – 45 – L1 8 L2 7 L3 6 LIN 5 LTRE 4 LBASS CE 3 LOUT 2 VSS 1 DI LC75341 CD-BP160W/180W/1500W/1700W FL701 VVKBJ749GNK-1: FL Display 11G S1 B21 B20 B19 B18 B17 B16 B15 S1 B7 B6 B5 B4 10G S1 B3 B2 B1 1G 2G B8 B9 B10 B11 B12 B13 B14 3G 4G 9G S1 S1 B7 B6 B5 B4 B3 B2 B1 5G 6G 7G S1 8G B1 B2 B3 B4 B5 B6 B7 S4 S5 S2 S3 a j h f g col e k b m n r p d c Dp 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G P1 S1 S1 S1 Dp Dp Dp Dp Dp Dp Dp Dp P2 B1 B1 B1 d d d d d d d d P3 B2 B2 B2 c c c c c c c c P4 B3 B3 B3 n n n n n n n n P5 B4 B4 B4 p p p p p p p p P6 B5 B5 B5 r r r r r r r r P7 B6 B6 B6 e e e e e e e e P8 B7 B7 B7 m m m m m m m m g g g g g g g g P9 B8 P10 B9 P11 B10 b b b b b b b b P12 B11 k k k k k k k k P13 B12 j j j j j j j j P14 B13 h h h h h h h h P15 B14 f f f f f f f f P16 B15 a a a a a a a a P17 B16 S2 S2 S2 S2 S2 S2 S2 S2 P18 B17 S3 S3 S3 S3 S3 S3 S3 S3 P19 B18 S4 S4 S4 S4 S4 S4 S4 S4 P20 B19 S5 S5 S5 S5 S5 S5 S5 S5 P21 B20 P22 B21 col Figure 46 FL DISPLAY – 46 – CD-BP160W/180W/1500W/1700W PARTS GUIDE CD-BP160W MODEL CD-BP160W Mini Component System consisting of CD-BP160W (main unit) and CP-BP160 (speaker system). CD-BP180W CD-BP180W Mini Component System consisting of CD-BP180W (main unit), CP-BP180 (front speaker) and GBOXS0041AWM1 (surround speaker). CD-BP1500W CD-BP1500W Mini Component System consisting of CD-BP1500W (main unit) and CP-BP1500 (speaker system). CD-BP1700W CD-BP1700W Mini Component System consisting of CD-BP1700W (main unit), CP-BP1700 (front speaker) and GBOXS0041AWM1 (surround speaker). “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP MARK: SPARE PARTS-DELIVERY SECTION Explanation of capacitors/resistors parts codes Capacitors Resistors VCC ....................... Ceramic type VCK ........................ Ceramic type VCT ........................ Semiconductor type VC • • MF ............... Cylindrical type (without lead wire) VC • • MN ............... Cylindrical type (without lead wire) VC • • TV ................ Square type (without lead wire) VC • • TQ ............... Square type (without lead wire) VC • • CY ............... Square type (without lead wire) VC • • CZ ............... Square type (without lead wire) VC • • • • • • • • • J .. The 13th character represents capacity difference. ("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%, "C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.) VRD ....................... Carbon-film type VRS ........................ Carbon-film type VRN ....................... Metal-film type VR • • MF ............... Cylindrical type (without lead wire) VR • • MN ............... Cylindrical type (without lead wire) VR • • TV ................ Square type (without lead wire) VR • • TQ ............... Square type (without lead wire) VR • • CY ............... Square type (without lead wire) VR • • CZ ............... Square type (without lead wire) VR • • • • • • • • • J .. The 13th character represents error. ("J" ±5%, "F" ±1%, "D" ±0.5%.) If there are no indications for the electrolytic capacitors, error is ±20%. If there are no indications for other parts, the resistors are ±5% carbon-film type. NOTE: Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace parts with specified ones for maintaining the safety and performance of the set. – 47 – CD-BP160W/180W/1500W/1700W NO. PRICE RANK PARTS CODE DESCRIPTION NO. CF303 CF351 CF352 INTEGRATED CIRCUITS VHILA9235M/-1 VHILC78641E-1 VHIM63001FP-1 J J J IC101 VHIAN7345K/-1 J IC301 IC302 IC303 VHITA7358AP-1 VHILC72131/-1 VHILA1832S/-1 J J J IC401 IC701 VHILC75341/-1 RH-IX0328AWZZ J J IC702,703 IC704 IC841 IC851 IC852 VHIKIA4558P-1 VHIKIA7042AP1 VHIKIA7810AP1 VHIKIA7805P-1 VHIAN78L05/-1 J J J J J IC901 VHISTK40204-1 J AQ Servo Amp.,LA9235M AV Servo/Signal Control,LC78641E AX Focus/Tracking/Spin/Sled Driver,M63001FP AM Playback and Record/Playback Amp.,AN7345K AG FM Front End,TA7358AP AP PLL (Tuner),LC72131 AN FM IF Det./FM Mpx./AM IF,LA1832S AM Audio Processor,LC75341 AX System Microcomputer, IX0328AW AC Ope Amp.,KIA4558P AC Reset,KIA7042AP AF Voltage Regulator,KIA7810AP AF Voltage Regulator,KIA7805P AE Constant Voltage Regulator, AN78L05 AX Power AMP.,STK40204 VSKTC3203Y/-1 VSKRC102M//-1 VSKTA1266GR-1 VSKTA1266GR-1 VSKRC104M//-1 VS2SC1845F/-1 VSKTC3199GR-1 VSKTA1266GR-1 VSKRC104M//-1 VSKTC3203Y/-1 VSKTC3194Y/-1 VSKTA1266GR-1 VSKTC3199GR-1 VSKTC3199GR-1 VSKTA1271Y/-1 VSKTA1273Y/-1 VSKTC3199GR-1 VSKRC102M//-1 VSKTA1274Y/-1 VSKTC2026//-1 VSKTC3199GR-1 VSKRC107M//-1 VSKTC3203Y/-1 J J J J J J J J J J J J J J J J J J J J J J J AC AC AB AB AC AC AB AB AC AC AD AB AB AB AC AE AB AC AE AF AB AC AC Silicon,NPN,KTC3203 Y Digital,NPN,KRC102 M Silicon,PNP,KTA1266 GR Silicon,PNP,KTA1266 GR Digital,NPN,KRC104 M Silicon,NPN,2SC1845 F Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1266 GR Digital,NPN,KRC104 M Silicon,NPN,KTC3203 Y Silicon,NPN,KTC3194 Y Silicon,PNP,KTA1266 GR Silicon,NPN,KTC3199 GR Silicon,NPN,KTC3199 GR Silicon,PNP,KTA1271 Y Silicon,PNP,KTA1273 Y Silicon,NPN,KTC3199 GR Digital,NPN,KRC102 M Silicon,PNP,KTA1274 Y Silicon,NPN,KTC2026 Silicon,NPN,KTC3199 GR Digital,NPN,KRC107 M Silicon,NPN,KTC3203 Y VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDTS6B04GM-1 VHD1N4004S/-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHDDS1SS133-1 VHP4204SRT7-1 VHEDZ3R9BSB-1 VHEDZ5R1BSB-1 VHEDZ6R2BSC-1 VHEDZ300BSB-1 VHEDZ6R2BSA-1 VHEDZ130BSB-1 J J J J J J J J J J J J J J J J J J J J J J AB AB AB AB AB AB AB AB AB AP AB AB AB AB AB AD AC AC AB AB AB AB Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,TS6B04GM Silicon,1N4004S Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 Silicon,DS1SS133 LED,Red,4204SRT7 Zener,3.9V,DZ3.9BSB Zener,5.1V,DZ5.1BSB Zener,DZ6.2BSC Zener,30V,DZ300BSB Zener,6.2V,DZ6.2BSA Zener,DZ130BSB DIODES D21,22 D93 D301,302 D305 D403,404 D601~604 D608 D611~618 D620,621 D801 D802~808 D851 D901~903 D951 D971 LED722 ZD61 ZD351 ZD601 ZD801 ZD802 ZD803 VARIABLE CAPACITORS VD301 VD302,303 VHCSVC348S/-1 VHCKDV147B/-1 RFILF0124AFZZ RFILF0003AWZZ RFILA0009AWZZ J J J AD FM IF,10.7 MHz AK FM IF AE AM IF RTRNP0296AWZZ RCILB0065AWZZ RCILI0017AWZZ RCILA0052AWZZ RCILB0058AWZZ RCILI0019AWZZ J J J J J J BE AC AB AE AC AD Power OSC,FM FM IF AM Antenna OSC,AM AM IF VP-XHR82K0000 VP-XH2R2K0000 VP-MK331K0000 RCILR0056AWZZ VP-DH101K0000 VP-DH101K0000 RCILZ0137AFZZ J J J J J J J AC AB AB AB AB AB AA 0.82 µH 2.2 µH,Choke 330 µH,Choke FM RF 100 µH,Choke 100 µH,Choke 0.29 µH J J J J AF AH AC AH Crystal,456 kHz Crystal,4.5 MHz Crystal,16.93 MHz Crystal,4.1943 MHz J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AB 100 µF,10V,Electrolytic AC 10 µF,16V,Electrolytic AB 0.1 µF,50V 0.47 µF,6.3V,Electrolytic AB 0.1 µF,50V AA 0.01 µF,50V AB 0.33 µF,25V AA 6 pF,50V AA 0.0047 µF,50V AA 3 pF (CH),50V AB 100 µF,10V,Electrolytic AB 0.1 µF,50V AA 100 pF,50V AA 0.047 µF,50V AB 2.2 µF,50V,Electrolytic AB 0.1 µF,50V AA 0.047 µF,50V AB 0.1 µF,50V AB 47 µF,10V,Electrolytic AB 0.1 µF,50V AB 100 µF,10V,Electrolytic AA 0.022 µF,25V AC 10 µF,16V,Electrolytic AA 0.0015 µF,50V AB 100 µF,10V,Electrolytic AA 68 pF,50V AA 0.0015 µF,50V AB 0.1 µF,50V AB 100 µF,10V,Electrolytic AA 0.022 µF,25V AC 100 µF,16V,Electrolytic AC 100 µF,16V,Electrolytic AB 47 µF,10V,Electrolytic AA 0.01 µF,16V AA 0.001 µF,50V AB 47 µF,10V,Electrolytic AA 0.01 µF,50V AC 330 µF,6.3V,Electrolytic 0.47 µF,6.3V,Electrolytic AA 100 pF,50V AA 0.01 µF,50V AA 100 pF,50V AB 0.1 µF,50V AA 0.022 µF,25V AA 0.022 µF,50V AB 100 µF,10V,Electrolytic AA 0.047 µF,50V TRANSFORMERS ! PT801 T301 T302 T303 T306 T351 COILS L61 L62 L104 L312 L351,352 L601 L920,921 VIBRATORS TRANSISTORS Q1 Q2 Q3 Q101 Q102,103 Q104~107 Q108~111 Q112 Q113 Q114 Q302 Q360 Q401,402 Q601~604 Q605,606 Q607 Q608 Q609 Q801 Q831 Q901~904 Q951 Q971 DESCRIPTION FILTERS CD-BP160W/180W/1500W/1700W IC1 IC2 IC3 PRICE RANK PARTS CODE J J AK Variable Capacitance,SVC348S AH Variable Capacitance,KDV147B X351 X352 XL1 XL701 92LCRSTL1425A RCRSP0002AWZZ 92LCRSTL1746A RCRSP0003AWZZ CAPACITORS C6 C7 C8 C11 C12 C13 C14 C16 C17 C18 C19 C20,21 C22 C23 C24 C25 C26 C27 C28 C29,30 C31 C34 C38,39 C40 C41 C42 C43 C44 C45 C46 C47 C49,50 C51 C52 C53 C54 C55 C56 C64 C71 C72 C73~78 C80 C81~83 C98 C99 C101 –1– VCEAZA1AW107M VCEAZA1CW106M VCKYTV1HB104K RC-EZY474AF0J VCKYTV1HB104K VCKYTV1HB103K VCKYTV1EF334Z VCCSPA1HL6R0J VCKYTV1HB472K VCCCTV1HH3R0C VCEAZA1AW107M VCKYTV1HB104K VCKYTV1HB101K VCKYTV1HB473K VCEAZA1HW225M VCKYTV1HB104K VCKYTV1HB473K VCKYTV1HB104K VCEAZA1AW476M VCKYTV1HB104K VCEAZA1AW107M VCTYBT1EF223Z VCEAZA1CW106M VCKYTV1HB152K VCEAZA1AW107M VCCSTV1HL680J VCKYTV1HB152K VCKYTV1HB104K VCEAZA1AW107M VCKYTV1EF223Z VCEAZA1CW107M VCEAZA1CW107M VCEAZA1AW476M VCTYPA1CX103K VCKYTV1HB102K VCEAZA1AW476M VCKYTV1HB103K VCEAZA0JW337M RC-EZY474AF0J VCKYTV1HB101K VCKYTV1HB103K VCKYTV1HB101K VCKYTV1HB104K VCKYTV1EF223Z VCKZPA1HF223Z VCEAZA1AW107M VCKZPA1HF473Z CD-BP160W/180W/1500W/1700W NO. C102,103 C104,105 C106,107 C108 C112~115 C116,117 C118,119 C120,121 C122,123 C126,127 C128,129 C130,131 C132,133 C134,135 C136 C137 C138 C139 C140 C141 C142 C143,144 C145 C148 C150 C301 C302 C303 C304 C305 C306 C307 C308 C309 C310 C311 C312 C313 C314,315 C316 C317 C318 C323 C324 C326 C330 C331 C332 C334 C335 C337 C338 C342 C350,351 C352 C353,354 C355 C356 C357 C358 C361 C362 C363 C364 C365 C366 C367,368 C369 C370~372 C373,374 C375 C380 C381 C382 C385 C386 C387 C391 C392 C393 C394 C395 PARTS CODE VCKYMN1HB102K VCKYMN1HB181K VCKYMN1HB102K VCEAZA1CW107M VCKYMN1HB331K VCEAZA1EW107M VCTYPA1EX333K VCKYMN1HB561K VCEAZA1EW476M VCKYMN1HB271K VCEAZA1EW226M VCTYPA1CX223K VCTYMN1CX332K VCEAZA1EW476M VCEAZA1EW226M VCTYMN1EF223Z VCEAZA1AW227M VCEAEA1HW335M VCQPKA2AA822J VCQYKA1HM393K VCEAZA1EW476M VCTYMN1CX222K VCKYMN1HB102K VCQYKA1HM473K VCEAZA1EW226M VCTYMN1CY103N VCKYMN1HB102K VCCCMN1HH100J VCTYMN1CY103N VCCCMN1HH4R7C VCTYMN1EF223Z VCEAZA1CW106M VCCSMN1HL4R7C VCKYMN1HB102K VCCCMN1HH150J VCCCMN1HH180J VCTYMN1EF223Z VCCCMN1HH220J VCTYMN1CX472K VCTYMN1EF223Z VCKYMN1HB102K VCKYMN1HB101K VCTYMN1EF223Z VCCUMN1HJ8R2D VCKYBT1HB102K VCCUMN1HJ150J VCKZPA1HF473Z VCTYMN1EF223Z VCCUMN1HJ270J VCKYMN1HB561K VCCUMN1HJ270J VCKYMN1HB102K VCTYMN1EF223Z VCTYMN1EF223Z VCEAZA1CW106M VCTYMN1EF223Z VCCSMN1HL220J VCKYMN1HB102K VCEAEA1HW225M VCEAEA1HW105M VCTYMN1EF223Z VCEAEA1HW335M VCTYMN1EF223Z VCEAZA1CW106M VCKZPA1HF223Z VCKYMN1HB102K VCEAEA1HW105M VCCUMN1HJ270J VCEAEA1HW105M VCTYPA1CX153K VCKYMN1HB102K VCEAZA1CW106M VCCCMN1HH120J VCCCMN1HH150J VCTYMN1CY103N VCKYMN1HB331K VCTYMN1EF223Z VCEAZA1CW476M VCKYMN1HB102K VCEAEA1HW105M VCEAZA1CW476M VCTYMN1EF223Z J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J PRICE RANK DESCRIPTION AA AA AA AC AA AB AA AA AB AA AB AA AA AB AB AA AC AB AA AB AB AA AA AB AB AA AA AA AA AA AA AC AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC AA AA AA AB AB AA AB AA AC AA AA AB AA AB AA AA AC AA AA AA AA AA AB AA AB AB AA 0.001 µF,50V 180 pF,50V 0.001 µF,50V 100 µF,16V,Electrolytic 330 pF,50V 100 µF,25V,Electrolytic 0.033 µF,25V 560 pF,50V 47 µF,25V,Electrolytic 270 pF,50V 22 µF,25V,Electrolytic 0.022 µF,16V 0.0033 µF,16V 47 µF,25V,Electrolytic 22 µF,25V,Electrolytic 0.022 µF,25V 220 µF,10V,Electrolytic 3.3 µF,50V,Electrolytic 0.0082 µF,100V,Polypropylene 0.039 µF,50V,Mylar 47 µF,25V,Electrolytic 0.0022 µF,16V 0.001 µF,50V 0.047 µF,50V,Mylar 22 µF,25V,Electrolytic 0.01 µF,16V 0.001 µF,50V 10 pF (CH),50V 0.01 µF,16V 4.7 pF (CH),50V 0.022 µF,25V 10 µF,16V,Electrolytic 4.7 pF,50V 0.001 µF,50V 15 pF (CH),50V 18 pF (CH),50V 0.022 µF,25V 22 pF (CH),50V 0.0047 µF,16V 0.022 µF,25V 0.001 µF,50V 100 pF,50V 0.022 µF,25V 8.2 pF (UJ),50V 0.001 µF,50V 15 pF (UJ),50V 0.047 µF,50V 0.022 µF,25V 27 pF (UJ),50V 560 pF,50V 27 pF (UJ),50V 0.001 µF,50V 0.022 µF,25V 0.022 µF,25V 10 µF,16V,Electrolytic 0.022 µF,25V 22 pF,50V 0.001 µF,50V 2.2 µF,50V,Electrolytic 1 µF,50V,Electrolytic 0.022 µF,25V 3.3 µF,50V,Electrolytic 0.022 µF,25V 10 µF,16V,Electrolytic 0.022 µF,50V 0.001 µF,50V 1 µF,50V,Electrolytic 27 pF (UJ),50V 1 µF,50V,Electrolytic 0.015 µF,16V 0.001 µF,50V 10 µF,16V,Electrolytic 12 pF (CH),50V 15 pF (CH),50V 0.01 µF,16V 330 pF,50V 0.022 µF,25V 47 µF,16V,Electrolytic 0.001 µF,50V 1 µF,50V,Electrolytic 47 µF,16V,Electrolytic 0.022 µF,25V NO. –2– PRICE RANK PARTS CODE C396 C397 C398 C399 C401,402 C403 C404 C405 C406 C407,408 C409~412 C413,414 C417,418 C419,420 C421~428 C429,430 C601 C602 C603,604 C605 C606 C607,608 C609 C610 C611 C612~614 C616 C617,618 C620 C621 C622 C623 C624 C625 C626 C627 C628 C629 C630 C631 C632 C633 C801,802 C803,804 C805,806 C807 C808,809 C810 C811 C812 C813 C831 C832 C833 C834 C841,842 C843 C851 C852 C853,854 C855 C901,902 C903,904 C905,906 C907,908 C909,910 C911,912 C913~916 C917 C930,931 VCEAZA1AW107M VCTYMN1EF223Z VCEAZA1AW107M VCTYMN1EF223Z VCKYMN1HB102K VCEAZA1EW226M VCEAZA1CW107M VCKZPA1HF223Z VCEAZA1HW226M VCEAZA1HW106M VCQYKA1HM104K VCTYMN1CX272K VCEAEA1HW105M VCEAZA1HW475M VCEAEA1HW105M VCKYMN1HB391K VCCSPA1HL271J VCTYMN1CX272K VCTYMN1CX682K VCKYMN1HB271K VCTYMN1CX272K VCTYMN1EF223Z VCEAZA1HW476M VCTYMN1EF223Z VCKZPA1HF223Z VCEAEA1HW225M VCEAEA1HW105M VCEAZA1CW106M VCEAZA1EW476M VCEAEA1HW105M VCCCMN1HH150J VCCCMN1HH180J VCTYBT1EF223Z VCEAZA1AW227M VCEAEA1HW104M VCTYMN1CY103N VCEAEA1HW335M VCKZPA1HF223Z VCEAZA1HW106M VCTYMN1EF223Z VCEAZA1EW476M VCEAZA1CW106M VCQYKA1HM104K VCEAZW1HW228M VCQYKA1HM104K VCEAZW1EW338M VCEAZA1HW107M VCEAZV1HW227M VCEAZA1HW476M VCEAZA1HW107M VCEAZA1VW107M VCEAZA1EW227M VCKZPA1HF223Z VCEAZA1EW226M VCQYKA1HM473K VCQYKA1HM104K VCEAZA1EW476M VCQYKA1HM104K VCKZPA1HF223Z VCEAZA1EW476M VCQYKA1HM473K VCCSPA1HL221J VCCSPA1HL150J VCEAZA1HW476M VCKZPA1HF223Z VCEAZA1HW107M VCEAZA1HW106M VCQYKA1HM104K VCEAZA1HW476M VCEAZA1HW226M J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J C935,936 C971 C972 VCEAZA1HW106M J VCEAZA1HW476M J VCEAZA1HW106M J DESCRIPTION 100 µF,10V,Electrolytic 0.022 µF,25V 100 µF,10V,Electrolytic 0.022 µF,25V 0.001 µF,50V 22 µF,25V,Electrolytic 100 µF,16V,Electrolytic 0.022 µF,50V 22 µF,50V,Electrolytic 10 µF,50V,Electrolytic 0.1 µF,50V,Mylar 0.0027 µF,16V 1 µF,50V,Electrolytic 4.7 µF,50V,Electrolytic 1 µF,50V,Electrolytic 390 pF,50V 270 pF,50V 0.0027 µF,16V 0.0068 µF,16V 270 pF,50V 0.0027 µF,16V 0.022 µF,25V 47 µF,50V,Electrolytic 0.022 µF,25V 0.022 µF,50V 2.2 µF,50V,Electrolytic 1 µF,50V,Electrolytic 10 µF,16V,Electrolytic 47 µF,25V,Electrolytic 1 µF,50V,Electrolytic 15 pF (CH),50V 18 pF (CH),50V 0.022 µF,25V 220 µF,10V,Electrolytic 0.1 µF,50V,Electrolytic 0.01 µF,16V 3.3 µF,50V,Electrolytic 0.022 µF,50V 10 µF,50V,Electrolytic 0.022 µF,25V 47 µF,25V,Electrolytic 10 µF,16V,Electrolytic 0.1 µF,50V,Mylar 2200 µF,50V,Electrolytic 0.1 µF,50V,Mylar 3300 µF,25V,Electrolytic 100 µF,50V,Electrolytic 220 µF,50V,Electrolytic 47 µF,50V,Electrolytic 100 µF,50V,Electrolytic 100 µF,35V,Electrolytic 220 µF,25V,Electrolytic 0.022 µF,50V 22 µF,25V,Electrolytic 0.047 µF,50V,Mylar 0.1 µF,50V,Mylar 47 µF,25V,Electrolytic 0.1 µF,50V,Mylar 0.022 µF,50V 47 µF,25V,Electrolytic 0.047 µF,50V,Mylar 220 pF,50V 15 pF,50V 47 µF,50V,Electrolytic 0.022 µF,50V 100 µF,50V,Electrolytic 10 µF,50V,Electrolytic 0.1 µF,50V,Mylar 47 µF,50V,Electrolytic 22 µF,50V,Electrolytic [180W/1700W Only] AB 10 µF,50V,Electrolytic AB 47 µF,50V,Electrolytic AB 10 µF,50V,Electrolytic AB AA AB AA AA AB AC AA AB AB AB AA AB AB AB AA AA AA AA AA AA AA AB AA AA AB AB AC AB AB AA AA AA AC AB AA AB AA AB AA AB AC AB AH AB AG AC AD AB AC AC AC AA AB AB AB AB AB AA AB AB AA AA AB AA AC AB AB AB AB RESISTORS R3 R4 R5 R6 VRD-MN2BD000C VRS-TV2AB104J VRS-TV2AB103J VRS-TV2AB393J VRS-TV2AB273J J J J J J AA AA AA AA AA 0 ohm,Jumper,ø1.4×3.5mm,Ivory 100 kohm,1/10W 10 kohm,1/10W 39 kohms,1/10W 27 kohms,1/10W CD-BP160W/180W/1500W/1700W NO. PARTS CODE R7 R8 R10 R11 R12,13 R14 R15 R16 R17 R19 R20 R21,22 R25 R35 R38 R39 R40 R42 R43 R44 R45 R46 R47 R48 R50 R51~54 R55,56 R58 R67,68 R71~78 R79 R80 R81,82 R83,84 R88 R94,95 R101,102 R103 R104,105 R106,107 R108,109 R110 R111,112 R113 R114,115 R116,117 R118,119 R120,121 R122,123 R124,125 R126 R127,128 R129,130 R131,132 R133,134 R135,136 R137 R138 R139 R140 R141 R142,143 R144 R145 R146 R147 R148 R149 R157 R302 R309 R311 R313 R314 R316 R322 R323 R325 R327 R336 R350 R351 VRS-TV2AB682J VRS-TV2AB331J VRS-TV2AB273J VRS-TV2AB123J VRS-TV2AB681J VRS-TV2AB122J VRS-TV2AB103J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD470J VRS-TV2AB221J VRS-TV2AB471J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD271J VRD-ST2CD471J VRS-TV2AB122J VRS-TV2AB124J VRS-TV2AB224J VRD-ST2CD102J VRS-TV2AB122J VRS-TV2AB102J VRD-ST2EE3R3J VRS-TV2AB682J VRS-TV2AB470J VRS-TV2AB683J VRD-ST2CD683J VRD-ST2CD221J VRD-ST2CD102J VRD-ST2CD102J VRS-TV2AB155J VRD-ST2CD105J VRS-TV2AB222J VRS-TV2AB103J VRS-TV2AB682J VRS-TV2AB103J VRD-MN2BD103J VRD-MN2BD472J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD332J VRD-MN2BD473J VRD-MN2BD472J VRD-MN2BD473J VRD-ST2CD102J VRD-ST2CD560J VRD-MN2BD104J VRD-MN2BD392J VRD-MN2BD562J VRD-MN2BD333J VRD-MN2BD683J VRD-MN2BD682J VRD-MN2BD392J VRD-MN2BD152J VRD-MN2BD101J VRD-MN2BD103J VRD-MN2BD153J VRD-ST2CD153J VRD-ST2EE221J VRD-ST2CD103J VRD-MN2BD103J VRD-ST2CD224J VRD-MN2BD473J VRD-ST2CD472J VRD-RT2HD820J VRD-MN2BD473J VRD-MN2BD223J VRD-ST2CD4R7J VRD-ST2EE151J VRD-MN2BD100J VRD-ST2CD103J VRD-MN2BD104J VRD-MN2BD333J VRD-ST2CD220J VRD-MN2BD472J VRD-MN2BD681J VRD-MN2BD683J VRD-MN2BD473J VRD-MN2BD330J VRD-MN2BD103J VRD-ST2CD272J VRD-MN2BD562J PRICE RANK J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 6.8 kohms,1/10W 330 ohms,1/10W 27 kohms,1/10W 12 kohms,1/10W 680 ohms,1/10W 1.2 kohms,1/10W 10 kohm,1/10W 10 kohm,1/6W 1 kohm,1/6W 47 ohms,1/6W 220 ohms,1/10W 470 ohms,1/10W 10 kohm,1/6W 1 kohm,1/6W 270 ohms,1/6W 470 ohms,1/6W 1.2 kohms,1/10W 120 kohms,1/10W 220 kohms,1/10W 1 kohm,1/6W 1.2 kohms,1/10W 1 kohm,1/10W 3.3 ohms,1/4W 6.8 kohms,1/10W 47 ohms,1/10W 68 kohms,1/10W 68 kohms,1/6W 220 ohms,1/6W 1 kohm,1/6W 1 kohm,1/6W 1.5 Mohms,1/10W 1 Mohm,1/6W 2.2 kohms,1/10W 10 kohm,1/10W 6.8 kohms,1/10W 10 kohm,1/10W 10 kohm,1/8W 4.7 kohms,1/8W 1 kohm,1/8W 2.2 kohms,1/8W 3.3 kohms,1/8W 47 kohms,1/8W 4.7 kohms,1/8W 47 kohms,1/8W 1 kohm,1/6W 56 ohms,1/6W 100 kohm,1/8W 3.9 kohms,1/8W 5.6 kohms,1/8W 33 kohms,1/8W 68 kohms,1/8W 6.8 kohms,1/8W 3.9 kohms,1/8W 1.5 kohms,1/8W 100 ohm,1/8W 10 kohm,1/8W 15 kohms,1/8W 15 kohms,1/6W 220 ohms,1/4W 10 kohm,1/6W 10 kohm,1/8W 220 kohms,1/6W 47 kohms,1/8W 4.7 kohms,1/6W 82 ohms,1/2W 47 kohms,1/8W 22 kohms,1/8W 4.7 ohms,1/6W 150 ohms,1/4W 10 ohm,1/8W 10 kohm,1/6W 100 kohm,1/8W 33 kohms,1/8W 22 ohms,1/6W 4.7 kohms,1/8W 680 ohms,1/8W 68 kohms,1/8W 47 kohms,1/8W 33 ohms,1/8W 10 kohm,1/8W 2.7 kohms,1/6W 5.6 kohms,1/8W NO. R352 R353 R355 R356 R357 R358 R359 R360 R361,362 R363~365 R370 R372~374 R375 R376 R377 R378 R379 R380 R381 R382 R383 R384 R385 R386 R387 R388 R391,392 R393 R395 R401,402 R403,404 R407 R408 R409,410 R415,416 R417,418 R419,420 R421,422 R423,424 R425 R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R611 R612 R613 R614 R615 R616 R617 R618 R619 R620 R621 R622 R623,624 R625~627 R629,630 R632~635 R636 R637 R638 R642 R643,644 R645 R646~648 R649 R650 R651,652 R653 R654 R655 R656 R658 R659 –3– PRICE RANK PARTS CODE VRD-MN2BD102J VRD-MN2BD271J VRD-MN2BD332J VRD-MN2BD102J VRD-ST2CD474J VRD-ST2CD392J VRD-MN2BD182J VRD-MN2BD472J VRD-MN2BD682J VRD-MN2BD103J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD471J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD102J VRD-MN2BD222J VRD-MN2BD152J VRD-MN2BD103J VRD-ST2EE151J VRD-MN2BD562J VRD-ST2CD562J VRD-MN2BD562J VRD-ST2CD223J VRD-ST2CD562J VRD-MN2BD392J VRD-ST2EE271J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD331J VRD-MN2BD272J VRD-MN2BD222J VRD-ST2CD222J VRD-ST2CD103J VRD-MN2BD392J VRD-MN2BD332J VRD-MN2BD562J VRD-MN2BD273J VRD-ST2CD474J VRD-MN2BD223J VRD-ST2CD102J VRD-MN2BD104J VRD-MN2BD103J VRD-ST2CD123J VRD-MN2BD563J VRD-ST2CD102J VRD-MN2BD333J VRD-MN2BD683J VRD-MN2BD474J VRD-MN2BD153J VRD-MN2BD104J VRD-ST2CD105J VRD-MN2BD824J VRD-ST2CD394J VRD-MN2BD154J VRD-ST2CD102J VRD-ST2CD224J VRD-MN2BD224J VRD-ST2CD225J VRD-MN2BD184J VRD-MN2BD330J VRD-MN2BD104J VRD-ST2EE271J VRD-MN2BD104J VRD-ST2CD103J VRD-ST2CD103J VRD-MN2BD683J VRD-MN2BD102J VRD-MN2BD473J VRD-MN2BD223J VRD-MN2BD102J VRD-MN2BD223J VRD-MN2BD102J VRD-MN2BD103J VRD-ST2CD683J VRD-MN2BD103J VRD-MN2BD102J VRD-ST2CD102J VRD-MN2BD102J VRD-ST2CD103J VRD-MN2BD473J VRD-MN2BD102J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA DESCRIPTION 1 kohm,1/8W 270 ohms,1/8W 3.3 kohms,1/8W 1 kohm,1/8W 470 kohms,1/6W 3.9 kohms,1/6W 1.8 kohms,1/8W 4.7 kohms,1/8W 6.8 kohms,1/8W 10 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 470 ohms,1/6W 1 kohm,1/8W 47 kohms,1/8W 1 kohm,1/8W 2.2 kohms,1/8W 1.5 kohms,1/8W 10 kohm,1/8W 150 ohms,1/4W 5.6 kohms,1/8W 5.6 kohms,1/6W 5.6 kohms,1/8W 22 kohms,1/6W 5.6 kohms,1/6W 3.9 kohms,1/8W 270 ohms,1/4W 1 kohm,1/8W 47 kohms,1/8W 330 ohms,1/8W 2.7 kohms,1/8W 2.2 kohms,1/8W 2.2 kohms,1/6W 10 kohm,1/6W 3.9 kohms,1/8W 3.3 kohms,1/8W 5.6 kohms,1/8W 27 kohms,1/8W 470 kohms,1/6W 22 kohms,1/8W 1 kohm,1/6W 100 kohm,1/8W 10 kohm,1/8W 12 kohms,1/6W 56 kohms,1/8W 1 kohm,1/6W 33 kohms,1/8W 68 kohms,1/8W 470 kohms,1/8W 15 kohms,1/8W 100 kohm,1/8W 1 Mohm,1/6W 820 kohms,1/8W 390 kohms,1/6W 150 kohms,1/8W 1 kohm,1/6W 220 kohms,1/6W 220 kohms,1/8W 2.2 Mohms,1/6W 180 kohms,1/8W 33 ohms,1/8W 100 kohm,1/8W 270 ohms,1/4W 100 kohm,1/8W 10 kohm,1/6W 10 kohm,1/6W 68 kohms,1/8W 1 kohm,1/8W 47 kohms,1/8W 22 kohms,1/8W 1 kohm,1/8W 22 kohms,1/8W 1 kohm,1/8W 10 kohm,1/8W 68 kohms,1/6W 10 kohm,1/8W 1 kohm,1/8W 1 kohm,1/6W 1 kohm,1/8W 10 kohm,1/6W 47 kohms,1/8W 1 kohm,1/8W CD-BP160W/180W/1500W/1700W NO. ! R660 R661 R662 R663~665 R666 R667,668 R669,670 R671 R672 R673~675 R676 R677~694 R695~697 R698~700 R701~703 R704 R705,706 R707 R708 R709,710 R711 R712,713 R714 R715 R716 R717 R718 R719 R720 R721 R722 R723 R724 R725 R726 R801,802 R803 R804 R805 R806 R807 R831 R832 R833 R841 R851 R901,902 R903,904 R905,906 R907,908 R909,910 R911,912 R913~915 R916,917 R918,919 R920 R931,932 R933,934 R951,952 R953,954 R971 R972 R973 R975 PRICE RANK PARTS CODE VRD-MN2BD103J VRD-ST2CD222J VRD-MN2BD103J VRD-ST2CD222J VRD-MN2BD102J VRD-ST2CD102J VRD-ST2CD103J VRD-MN2BD103J VRD-ST2CD103J VRD-ST2CD102J VRD-ST2CD472J VRD-ST2CD102J VRD-ST2CD681J VRD-ST2CD821J VRD-ST2CD102J VRD-MN2BD473J VRD-ST2CD152J VRD-MN2BD152J VRD-ST2CD103J VRD-ST2CD222J VRD-MN2BD104J VRD-ST2CD272J VRD-MN2BD392J VRD-ST2CD392J VRD-ST2CD472J VRD-MN2BD683J VRD-MN2BD562J VRD-ST2CD103J VRD-MN2BD104J VRD-ST2CD183J VRD-ST2CD333J VRD-ST2CD101J VRD-ST2CD104J VRD-ST2CD103J VRD-ST2CD184J VRD-ST2EE223J VRS-VV3DA681J VRD-ST2CD222J VRD-ST2CD473J VRD-ST2CD100J VRD-ST2CD123J VRD-RT2HD3R3J VRD-RT2HD330J VRD-ST2CD223J VRD-ST2CD223J VRD-ST2CD103J VRD-ST2CD563J VRD-ST2CD821J VRD-ST2CD102J VRN-VV3AAR10J VRD-ST2CD102J VRD-ST2CD103J VRD-ST2CD563J VRD-ST2EE4R7J VRG-ST2EC101J VRD-ST2CD223J VRD-MN2BD102J VRD-ST2CD683J VRD-RT2HD331J VRD-ST2CD472J VRD-ST2CD102J VRD-ST2CD683J VRD-ST2CD153J VRD-RT2HD1R5J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AB DESCRIPTION NO. 10 kohm,1/8W 2.2 kohms,1/6W 10 kohm,1/8W 2.2 kohms,1/6W 1 kohm,1/8W 1 kohm,1/6W 10 kohm,1/6W 10 kohm,1/8W 10 kohm,1/6W 1 kohm,1/6W 4.7 kohms,1/6W 1 kohm,1/6W 680 ohms,1/6W 820 ohms,1/6W 1 kohm,1/6W 47 kohms,1/8W 1.5 kohms,1/6W 1.5 kohms,1/8W 10 kohm,1/6W 2.2 kohms,1/6W 100 kohm,1/8W 2.7 kohms,1/6W 3.9 kohms,1/8W 3.9 kohms,1/6W 4.7 kohms,1/6W 68 kohms,1/8W 5.6 kohms,1/8W 10 kohm,1/6W 100 kohm,1/8W 18 kohms,1/6W 33 kohms,1/6W 100 ohm,1/6W 100 kohm,1/6W 10 kohm,1/6W 180 kohms,1/6W 22 kohms,1/4W 680 ohms,2W 2.2 kohms,1/6W 47 kohms,1/6W 10 ohm,1/6W 12 kohms,1/6W 3.3 ohms,1/2W 33 ohms,1/2W 22 kohms,1/6W 22 kohms,1/6W 10 kohm,1/6W 56 kohms,1/6W 820 ohms,1/6W 1 kohm,1/6W 0.1 ohm,1W 1 kohm,1/6W 10 kohm,1/6W 56 kohms,1/6W 4.7 ohms,1/4W 100 ohm,1/4W,Fusible 22 kohms,1/6W 1 kohm,1/8W 68 kohms,1/6W 330 ohms,1/2W 4.7 kohms,1/6W 1 kohm,1/6W 68 kohms,1/6W 15 kohms,1/6W 1.5 ohms,1/2W ! ! ! ! OTHER CIRCUITRY PARTS BF301 BI4/CNS4 BI102/CNS102 BI402/CNP402 BI701/CNS701 CNP1 CNP2 CNP3 CNP3A CNP4 CNP11 CNP12 CNP101 CNP302 CNP401 RFILR0008AWZZ J QCNWN1572AWZZ J QCNWN1569AWZZ J QCNWN1561AWZZ J QCNWN1562AWZZ J QCNCM704GAWZZ J QCNCM704HAWZZ J 92LCONE6P53253 J 92LCONE6P53254 J QCNCM705FAFZZ J 92LCONE5P53254 J 92LCONEAP53254 J QCNCM705CAFZZ J 92LCONE2P5268 J QCNCWZG25AWZZ J AE Band Pass Filter AF Connector Ass’y,6/6Pin Connector Ass’y,7/6Pin AF Connector Ass’y,5/5Pin AH Connector Ass’y,10/10Pin AC Plug,7Pin AC Plug,8Pin AC Plug,6Pin AC Plug,6Pin AB Plug,6Pin AB Plug,5Pin AD Plug,10Pin AA Plug,3Pin AB Plug,2Pin AE Socket,25Pin PRICE RANK PARTS CODE CNP702 CNP703 CNP801 CNP802 CNP951 CNP971 CNS1A/B CNS2A/B CNS3A/B CNS971 F801,802 F803 FC701 FC702 FL701 FW951 JK951 M1 M2 M3 M901 RL951 RX701 SO302 SO401 SO801 SO901 SO901 QCNCWZF25AWZZ QCNCWZF13AWZZ QCNCM049EAWZZ QCNCM035HAWZZ QCNCW012EAWZZ 92LCONE2P53253 QCNWN1537AWZZ QCNWN1538AWZZ QCNWN1539AWZZ QCNWN1389AWZZ 92LFUSET402E 92LFUSET202E QCNWN1568AWZZ QCNWN1544AWZZ VVKBJ749GNK-1 QCNWN1563AWZZ QJAKM0004AWZZ 92LMMTR1651B 92LMMTR1854A 92LTWMEN7E6Y RMOTV0027AWZZ RRLYD0014AWZZ VHLN63H380A-1 QTANC0206AWZZ QSOCJ0219AWZZ QSOCA0204AWZZ QTANA0417AWZZ QTANA0808AWZZ J J J J J J J J J J J J J J J J J J J J J J J J J J J J SW1 SW2 SW3 SW4 SW401 SWMPU10780MLB SWMPU11470MLB SWMPU11470MLB QSW-F9001AW01 QSW-S0024AWZZ J J J J J SW601 92LSWICH1401AT J SW602 SW603 92LSWICH1401AT J 92LSWICH1401AT J SW609 SW610 92LSWICH1401AT J 92LSWICH1401AT J SW611 SW612 92LSWICH1401AT J 92LSWICH1401AT J SW613 SW614 SW615 92LSWICH1401AT J 92LSWICH1401AT J 92LSWICH1401AT J SW616 SW617 SW618 92LSWICH1401AT J 92LSWICH1401AT J 92LSWICH1401AT J SW619 92LSWICH1401AT J SW620 SW621 92LSWICH1401AT J 92LSWICH1401AT J SW622 92LSWICH1401AT J SW623 SW624 92LSWICH1401AT J 92LSWICH1401AT J SW625 SW626 92LSWICH1401AT J 92LSWICH1401AT J SW627 SW628 92LSWICH1401AT J 92LSWICH1401AT J SW629 SW801 92LSWICH1401AT J QSOCE0005AWZZ J DESCRIPTION AE Socket,25Pin Plug,13Pin AD Plug,5Pin AB Plug,8Pin AC Plug,5Pin AB Plug,2Pin AG Connector Ass’y,7/7Pin AG Connector Ass’y,8/8Pin AE Connector Ass’y,6/6Pin AC Connector Ass’y,2Pin AD Fuse,T4 L 250V Fuse,T2A L 250V Flat Cable,25Pin AE Flat Cable,13Pin BD FL Display Connector Ass’y,5Pin AK Jack,Headphones Motor with Chassis [Spindle] AP Motor with Gear [Sled] AR Motor with Worm Pulley AM Motor,Air Cooling Fan AK Relay AK Remote Sensor,N63H380A FM Terminal AD Jack,Video/AUX AF Socket,AC Input AE Terminal,Speaker [160W/1500W] Terminal,Speaker [180W/1700W] Switch,Push Type [Open/Close] Switch,Push Type [Clamp] Switch,Push Type [Disc Number] AD Switch,Leaf Type [Pickup In] AE Switch,Slide Type [SPAN SELECTOR] AC Switch,Key Type [ON/STAND-BY] AC Switch,Key Type [CLOCK] AC Switch,Key Type [TIMER/SLEEP] AC Switch,Key Type [DISC SKIP] AC Switch,Key Type [OPEN/CLOSE] AC Switch,Key Type [DIMMER] AC Switch,Key Type [X-BASS/DEMO] AC Switch,Key Type [EQUALIZER] AC Switch,Key Type [VOLUME UP] AC Switch,Key Type [VOLUME DOWN] AC Switch,Key Type [CD] AC Switch,Key Type [TAPE] AC Switch,Key Type [TUNING/TIME DOWN] AC Switch,Key Type [MEMORY/SET] AC Switch,Key Type [REWIND] AC Switch,Key Type [FAST FORWARD] AC Switch,Key Type [PLAY/REPEAT] AC Switch,Key Type [STOP] AC Switch,Key Type [REVERSE PLAY] AC Switch,Key Type [REC/PAUSE] AC Switch,Key Type [TUNING/TIME UP] AC Switch,Key Type [VIDEO/AUX] AC Switch,Key Type [TUNER (BAND)] AC Switch,Key Type [REVERSE] AH Switch,Slide Type [Voltage Selector] MECHANICAL PARTS 301 302 303 304 305 –4– NGERH0011AWZZ NGERH0012AWZZ MLEVP0080AWZZ NSFTM0020AWFW 92LMCUSN1524A J J J J J AC AC AC AD AD Gear,Middle Gear,Drive Rail,Guide Shaft,Guide Cushion CD-BP160W/180W/1500W/1700W NO. ! PRICE RANK PARTS CODE 306 306- 1 92LHPC1LXASY ———— J 306- 2 306- 3 701 702 703 704 M1 M2 SW4 NGERR0043AFZZ MSPRC0961AFZZ XBSSD26P06000 XHBSD20P05000 XBBSD20P03000 LX-WZ1070AFZZ 92LMMTR1651B 92LMMTR1854A QSW-F9001AW01 J J J J J J J J J DESCRIPTION NO. BD Pickup Unit Ass’y — Pickup Unit (Not Replacement Item) AC Gear,Rack AA Spring,Rack AA Screw,ø2.6×6mm AA Screw,ø2×5mm AA Screw,ø2×3mm AA Washer,ø1.5×ø3.8×0.25mm Motor with Chassis [Spindle] AP Motor with Gear [Sled] AD Switch,Leaf Type [Pickup In] 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 262 263 264 267 268 274 275 276 280 281 282 601 602 604 605 606 607 608 609 611 612 613 614 615 616 618 619 CABINET PARTS ! 201 201 201 201 201- 1 92LCAB3285AASY 92LCAB3290AASY 92LCAB3293AASY 92LCAB3295AASY ———— J J J J 201- 2 201- 3 201- 4 201- 5 201- 6 201- 7 201- 8 201- 8 201- 8 201- 8 201- 9 201-10 201-11 201-12 201-13 201-14 201-15 201-16 201-20 201-21 201-22 201-23 201-24 201-25 202 202- 1 GDORF0074AWSA GDORF0075AWSA GCOVA1251AWSA GCOVA1298AWSA HDECQ0521AWSA HDECQ0522AWSA HDECQ0549AWSA HDECQ0563AWSA HDECQ0575AWSA HDECQ0576AWSA PSHEM0008AWZZ JKNBZ0649AWSA JKNBZ0679AWSA JKNBZ0714AWSA JKNBZ0658AWSA JKNBZ0659AWSA JKNBZ0660AWSA JKNBZ0661AWSA GCOVA1258AWSA MLIFP0008AWZZ MSPRD0138AWFJ MSPRD0127AWFJ 92LBADGE1671A JKNBZ0650AWSA 92LCAB3283BASY ———— J J J J J J J J J J J J J J J J J J J J J J J J J 202- 2 203 203- 1 PCUSG0022AWZZ J 92LCAB3283CASY J ———— AB AM — 203- 2 204 204- 1 PCUSG0022AWZZ J 92LCOV3303AASY J ———— AB AM — 204- 2 204- 3 205 206 206 206 206 208 209 210 212 GCOVA1254AWSA GCOVA1255AWSA GCAB-1184AWSA GITAR0562AWSA GITAR0563AWSA GITAR0582AWSA GITAR0583AWSA LANGK0110AWFW LANGK0111AWFW LANGK0192AWFW LANGK0207AWFW J J J J J J J J J J J AE AE AP 213 214 219 220 221 222 223 224 225 226 230 231 232 233 LCHSM0094AWFW LHLDZ1241AWZZ MLOKC0003AWZZ MLOKC0004AWZZ MSPRD0109AWFJ MSPRD0110AWFJ NFANP0001AWZZ 92LPT0331105 PCUSG0022AWZZ PRDAR0148AWFW QCNWN1615AWZZ QFSHD0001AWZZ 92LBE241414 92LCSPR1431C J J J J J J J J J J J J J J — AE AE AH AE AD AD AF AG AF AF AF AF AE AB AD AB AC AF AM — AE AE AD AP AE AD AD AB AB AD AM AB AR AC AB AD AA Front Cabinet Ass’y [1500W] Front Cabinet Ass’y [160W] Front Panel Ass’y [1700W] Front Panel Ass’y [180W] Front Panel (Not Replacement Item) Cassette Holder,Tape 1 Cassette Holder,Tape 2 Cassette Cover,Tape 1 Cassette Cover,Tape 2 Panel,Cassette,Tape 1 Panel,Cassette,Tape 2 Panel,Amp [1500W] Panel,Amp [1700W] Panel,Amp [180W] Panel,Amp [160W] Sheet,Front Panel Button,Volume Up/Down Button,Center Operation Button,ON/Stand-by/Clock Button,CD/Tuner (BAND) Button,Tape/Video/Aux Button,Tuning/Time Button,Dimmer Cover,LED Damper Cassette Spring,Tape 1 Cassette Spring,Tape 2 Badge,SHARP Button,Disc Skip/X-BASS Side Panel Ass’y,Left Side Panel,Left (Not Replacement Item) Cushion,Leg Side Panel Ass’y,Right Side Panel,Right (Not Replacement Item) Cushion,Leg CD Tray Cover Ass’y Cover.CD Tray (Not Replacement Item) Cover,CD Tray Panel,Left Cover,CD Tray Panel,Right Top Cabinet Rear Panel [1500W] Rear Panel [1700W] Rear Panel [180W] Rear Panel [160W] Bracket,Cassette Lock,Tape 1 Bracket,Cassette Lock,Tape 2 Bracket,Fan Support Bracket,Power Transfomer Support Main Chassis Holder,FL Display Lock Lever,Cassette,Tape 1 Lock Lever,Cassette,Tape 2 Spring,Cassette Lock,Tape 1 Spring,Cassette Lock,Tape 2 Rotary Fan Turntable Cushion,Leg Heat Sink,Main Lug Wire Holder,Fuse Belt,Drive Spring,Ring PRICE RANK PARTS CODE 92LEVA0330702 92LMAG0104302 92LMT0304302 92LNBAND1318A 92LNM0305401 92LPT0303002 92LPT0304303 92LPT0304304 92LPT0304305 92LPT0304306 92LPT0304307 92LPT0304308 92LPT0304309 92LPT0305413 92LPT0309506 92LPT0309507 92LPT0309508 92LPT0309509 92LPT0309510 92LPT0309511 92LPT0311101 92LPT0311102 92LPT0312005 92LPT0320201 92LPT0330301 92LPT0330803 92LPT0331003 92LSP0304303 92LSP0304305 92LSP0304306 LANGK0184AWFW KMECB0013AWZZ 92LCAUT1706A1 92LCAUT1706B PSHEZ0067AWZZ 92LRDAT1468B QLUGP0002AWZZ QLUGP0001AWZZ XBBSD20P04000 XJBSF30P12000 LX-JZ0004AWFD XESSD30P10000 XHBSD26P04000 XJBSD30P12000 XJBSD30P10000 XJBSD30P14000 XJSSD30P10000 LX-HZ0009AWFD LX-HZ0169AFFD LX-JZ0010AFFD XEBSD30P10000 LX-BZ2222AXZZ 92LSC0308MBZI 92LSC0308RBZI J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J AA AB AB AE AC AD AD AD AD AE AD AB AC AE AU AK AT AB AG BK AC AA AB AC AA AA AA AA AA AA AA AA AA AC AA AA AA AB DESCRIPTION Cushion,CD Player Unit Magnet Plate,Metal Nylon Band,80mm Velvet Cushion Roller Lever,Stop Stopper,Cam Gear Lever,Lock Stabilizer Support,Cam Lock Gear Pin Cap,Pulley Stopper Cam Gear Lower Gear,Turntable Drive Gear,Open/Close Drive Gear,Planet Gear,Drive Gear,Pulley Gear,Middle Lever,Clamp Lever,Disc Gear,Cam Support,Stabilizer Chassis,CD Player Unit CD,Chassis Chassis,Disc Tray Spring,Stopper Spring,Lock Spring,Lock Gear Bracket,Tuner PWB Tape Mechanism Ass’y Label,Class 3A Laser Label,Laser Sheet,PWB Sapport Heat Sink, Sub Lug Lug Screw,ø2×4mm Screw,ø3×12mm Screw,ø3×12mm Screw,ø3×10mm Screw,ø2.6×4mm Screw,ø3×12mm Screw,ø3×10mm Screw,ø3×14mm Screw,ø3×10mm Screw,Special Screw,ø4×12mm Screw,ø3×10mm Screw,ø3×10mm Screw,Special Screw,ø3×8mm Screw,ø3×8mm ACCESSORIES/PACKING PARTS ! 92LCORDZ1652A J ! 92LCORD577B J ! QACCB0008AW00 J ! QACCE0011AW00 J ! QACCL0002AW00 J ! QACCZ0008AW00 J ! QANTL0008AWZZ J QPLGA0003AWZZ J QPLGA0004AWZZ J ! –5– SPAKA0235AWZZ SPAKA0245AWZZ J J SPAKC0960AWZZ J SPAKC0961AWZZ J AM AC Power Supply Cord [For Taiwan] AM AC Power Supply Cord [For Central America] AW AC Power Supply Cord [For Hong Kong] AM AC Power Supply Cord [Except for Hong Kong/Taiwan/ Australia/New Zealand/Central America/Argentina] AN AC Power Supply Cord [1500W/160W for Australia/ New Zealand] AC Power Supply Cord [1500W for Argentina] AH AM Loop Antenna AF Adaptor,AC Plug AF Adaptor,AC Plug [For Brasil/Central/Sou] Packing Add.,Left/Right [1500W] Packing Add.,Left/Right [160W/180W/1700W] Packing Case [1500W Except for Australia] Packing Case [1500W for Australia] CD-BP160W/180W/1500W/1700W NO. PRICE RANK PARTS CODE SPAKC0962AWZZ J SPAKC0990AWZZ J SPAKC0992AWZZ J SPAKC0993AWZZ J SPAKC1020AWZZ J SPAKC1021AWZZ J SPAKP0013AWZZ SPAKZ0573AWZZ SPAKZ0611AWZZ SPAKZ0623AWZZ TCAUA0042AWZZ TGANE0011AW31 J J J J J J TGANE0011AW32 J TGANE0011AW35 J TGANE0011AW38 J TGANE0028AW35 J TGANE0028AW42 J TGANZ0028AW37 J TGANZ0028AW39 J TINST0064AWZZ J TINST0065AWZZ J TINST0069AWZZ J TINST0070AWZZ J TINSZ0528AWZZ J TINSZ0529AWZZ J TINSZ0530AWZZ J TINSZ0549AWZZ J TINSZ0551AWZZ J TINSZ0552AWZZ J TINSZ0560AWZZ TINSZ0561AWZZ TLABE0368AWZZ J J J TLABE0374AWZZ J TLABE0380AWZZ J TLABE0381AWZZ J DESCRIPTION NO. Packing Case [1700W Except for Australia/ New Zealand] Packing Case [180W Except for Australia/New Zealand] Packing Case [160W for Australia] Packing Case [180W Except for Australia] Packing Case [1700W for Australia/New Zealand] Packing Case [180W for Australia/New Zealand] AC Polyethylene Bag,Unit Sheet,CD Tray Pad,Surround Speaker [1700W] Pad,Surround Speaker [180W] Caution Tag [Taiwan] Warranty Card [1500W for Philippines] Warranty Card [1700W for Philippines] Warranty Card [160W for Philippines] Warranty Card [180W for Philippines] Warranty Card [1700W for Taiwan] Warranty Card [180W for Taiwan] Warranty Card [1500W for Taiwan] Warranty Card [160W for Taiwan] Operation Manual [1500W for Thailand] Operation Manual [1700W for Thailand] Operation Manual [180W for Thailand] Operation Manual [160W for Thailand] Operation Manual [1500W Except for Thailand/ Australia/New Zealand] AE Operation Manual [1500W for Australia/New Zealand] Operation Manual [1700W Except for Thailand/ Australia/New Zealand] Operation Manual [180W Except for Thailand/ Australia/New Zealand] Operation Manual [160W Except for Thailand/ Australia/New Zealand] Operation Manual [160W for Australia/New Zealand] AF Operation Manual [1700W for Australia/New Zealand] Operation Manual [180W for Australia/New Zealand] Label,Bar Code [1500W for Asia/Middle and Near East/Africa] Label,Bar Code [160W for Asia/Middle and Near East/Africa] Label,Bar Code [1700W Except for Asia/Middle and Near East/Africa] Label,Bar Code [180W Except for Asia/Middle and Near East/Africa] –6– PRICE RANK PARTS CODE TLABE0384AWZZ J TLABE0385AWZZ J TLABE0386AWZZ J TLABE0390AWZZ J TLABG0002AWZZ TLABG0006AWZZ TLABG0007AWZZ TLABH0056AWSA TLABH0057AWSA TLABH0058AWSA TLABR1093AWZZ J J J J J J J TLABS0247AWZZ TLABZ0691AWZZ TLABZ0692AWZZ J J J TLABZ0693AWZZ J TLABZ0694AWZZ TLABZ0697AWZZ J J TLABZ0698AWZZ TLABZ0730AWZZ TLABZ0738AWZZ TLABZ0794AWZZ TLSTS0014AWZZ TMAPC0169AWZZ TMAPC0170AWZZ TSPC-0653AWZZ J J J J J J J J TSPC-0654AWZZ J TSPC-0655AWZZ J TSPC-0656AWZZ J TSPC-0657AWZZ J TSPC-0658AWZZ J TSPC-0694AWZZ J TSPC-0695AWZZ J TSPC-0696AWZZ J TSPC-0697AWZZ J TSPC-0698AWZZ J TSPC-0716AWZZ J TTAG-0004AWZZ 92LBAG1460C1 J J AB 92LBAG1770A J AB 92LBAG760C J AA 92LFANT1746A 92LGCARD1266E1 92LLABL1204C 92LLABL1507B J J J J AD AC AA AA 92L411-0075 92L16-01-0002 J J AG AF AB AB AC AF AF AF AB DESCRIPTION Label,Bar Code [1500W Except for Asia/Middle and Near East/Africa] Label,Bar Code [1700W for Asia/Middle and Near East/Africa] Label,Bar Code [180W for Asia/Middle and Near East/Africa] Label,Bar Code [160W for Asia/Middle and Near East/Africa] Label,Hong Kong Label,Carto [1500W for Argentina] Label,Set [1500W for Argentina] Sheet,E/C Comparison Sheet,E/C Comparison Sheet,E/C Comparison Label,Bar Code [1500W the Middle South America] Label,Safety [For Hong Kong] Feature Label,Tape 2 [1500W] Feature Label,Tape 1 [Except for Australia/New Zealand/Turkey] Feature Label,Tape 1 [For Australia/New Zealand/ Turkey] Label,Carton [1500W for Taiwan] Feature Label,Tape 2 [1700W/180W] Label,Carton [1700W for Taiwan] Label,Carton [180W for Taiwan] Label,Carton [160W for Taiwan] Label,Carton [1500W for Turkey] List,Service Station MAP [160W/1500W] MAP [180W/1700W] Label,Specification [1500W for Taiwan] Label,Specification [1500W for Thailand] Label,Specification [1500W Except for Taiwan/ Thailand] Label,Specification [1700W for Taiwan] Label,Specification [1700W for Thailand] Label,Specification [1700W Except for Taiwan/ Thailand] Label,Specification [180W for Thailand] Label,Specification [180W for Taiwan] Label,Specification [160W for Taiwan] Label,Specification [160W for Thailand] Label,Specification [160W Except for Taiwan/ Thailand] Label,Specification [180W Except for Taiwan/ Thailand] Cord Tag [1500W for Argentina] Polyethylene Bag,Operation Manual Polyethylene Bag,AC Power Supply Cord Polyethylene Bag,AC Plug Adaptor FM Antenna Guarantee Card Label,Made in Malaysia Packing Case Label,Made in Malaysia Polyethylene Bag,Speaker Polyethylene Bag,Surround Speaker [180W/1700W Only] CD-BP160W/180W/1500W/1700W NO. PRICE RANK PARTS CODE 92L412-0133 J 92L412-0138 92L412-0148 92L416-0068 J J J RRMCG0221AWSA J GFTAB1022AWSB J DESCRIPTION AN Packing Add.,Speaker [180W/1500W] Packing Add.,Speaker [1700W] Packing Add.,Speaker [160W] Packing Add.,Surround Speaker [180W/1700W Only] AR Remote Control AK Battery Lid,Remote Control P.W.B. ASSEMBLY (Not Replacement Item) PWB-A1~4 92LPWB3285MANS J PWB-A1~4 92LPWB3293MANS J PWB-A1~4 92LPWB3295MANS J PWB-B PWB-C PWB-D 92LPWB3303CDUS J QPWBF0027AWZZ J ———— PWB-E 92LPC99C017 J — Main/Display/Headphones/ Socket (Combined Ass’y) [1500W/160W] — Main/Display/Headphones/ Socket (Combined Ass’y) [1700W] — Main/Display/Headphones/ Socket (Combined Ass’y) [180W] — CD Servo AD CD Motor (PWB Only) — Tape Mechanism/Record/ Playback/Erase Head CD T/T Up/Down Motor (PWB Only) NO. PRICE RANK PARTS CODE DESCRIPTION CP-BP1500 SPEAKER BOX PARTS (CD-BP1500W) 901 902 903 904 905 906 907 908 909 912 913 914 915 92L126-0009 92L126-0010 92L121-0178 92L051-0095 92L051-0096 92L291-0079 92L394-0056 92L394-0055 92L351-0364 92L319-0027 92L372-0109 92L372-0124 92L122-0048 J J J J J J J J J J J J J BA BA AP AY AY AG AC AC AE AB AB AG SP1,2 SP3,4 SP5,6 VSPA010WB19CA VSPA010WB20CA VSP0051TBN46A J J J AW AW AQ Front Panel Ass’y,Left Front Panel Ass’y,Right Net Frame Ass’y Speaker Box Ass’y,Left Speaker Box Ass’y,Right Speaker Cord Cushion,Foot Cushion,Part Label,Specifications Catching Holder Screw,ø3×10mm Screw,ø4×12mm Speaker Cord Ass’y (With Capacitor) Woofer Sub Woofer Tweeter CP-BP1700 OTHER SERVICE PART UDSKA0004AFZZ J AZ CD Pickup Lens Cleaner CP-BP160 SPEAKER BOX PARTS (CD-BP160W) 901 902 903 904 905 906 907 908 909 912 913 914 915 92L126-0015 92L126-0016 92L121-0196 92L051-0099 92L051-0100 92L291-0079 92L394-0056 92L394-0059 92L351-0363 92L319-0027 92L372-0027 92L372-0124 92L122-0048 J J J J J J J J J J J J J AE AC AB AG SP1,2 SP3,4 SP5,6 VSPA010WB13WA J VSPA010WB13WA J VSP0051TBN98A J AV AV AQ AG AC Front Panel Ass’y,Left Front Panel Ass’y,Right Net Frame Ass’y Speaker Box Ass’y,Left Speaker Box Ass’y,Right Speaker Cord Cushion,Foot Cushion,Part Label,Specifications Catching Holder Screw,ø3×10mm Screw,ø4×12mm Speaker Cord Ass’y (With Capacitor) Woofer Sub Woofer Tweeter CP-BP180 SPEAKER BOX PARTS (CD-BP180W) 901 902 903 904 905 906 907 909 912 913 914 915 92L126-0013 92L126-0014 92L121-0178 92L051-0087 92L051-0088 92L291-0079 92L394-0056 92L351-0368 92L319-0027 92L372-0109 92L372-0124 92L122-0048 J J J J J J J J J J J J AG SP1,2 SP3,4 SP5,6 VSPA010WB29WA J VSPA010WB30WA J VSP0051TBN98A J AW AW AQ AP AG AC AE AB SPEAKER BOX PARTS (CD-BP1700W) 901 902 903 904 905 906 907 908 909 912 913 914 915 92L126-0011 92L126-0012 92L121-0182 92L051-0097 92L051-0098 92L291-0079 92L394-0056 92L394-0057 92L351-0366 92L319-0027 92L372-0027 92L372-0124 92L122-0048 J J J J J J J J J J J J J BA BA AP AY AY AG AC AC AE AC AB AG SP1,2 SP3,4 SP5,6 VSPA010WB29WA J VSPA010WB30WA J VSP0051TBN98A J AW AW AQ Front Panel Ass’y,Left Front Panel Ass’y,Right Net Frame Ass’y Speaker Box Ass’y,Left Speaker Box Ass’y,Right Speaker Cord Cushion,Foot Cushion,Part Label,Specifications Catching Holder Screw,ø3×10mm Screw,ø4×12mm Speaker Cord Ass’y (With Capacitor) Woofer Sub Woofer Tweeter GBOXS0041AWM1 SPEAKER BOX PARTS(CD-BP180W/1700W ONLY) 901 902 903 904 905 SP1,2 Front Panel Ass’y,Left Front Panel Ass’y,Right Net Frame Ass’y Speaker Box Ass’y,Left Speaker Box Ass’y,Right Speaker Cord Cushion,Foot Label,Specifications Catching Holder Screw,ø3×10mm Screw,ø4×12mm Speaker Cord Ass’y (With Capacitor) Woofer Sub Woofer Tweeter –7– 92L32-01-0460 92L60-00-1190 92L33-01-1430 92L37-03-0110 92L35-02-0320 VSPA010PB23WA J J J J J J Bottom Cabinet Net Frame Ass'y Label,Part Cord Speaker Cord Screw,ø3×14mm Speaker CD-BP160W/180W/1500W/1700W CD-BP160W/180W/1500W/1700W 701 306 A 304 306-2 701 306-1 704 B 306-3 302 C 301 702 303 D 703x2 E M1 F 305 M2 305x2 G SW4 PWB-C H 1 2 3 4 Figure 8 CD MECHANISM EXPLODED VIEW –8– 5 6 CD-BP160W/180W/1500W/1700W CD-BP160W/180W/1500W/1700W 202 A 280x2 202-1 608x2 206 607x2 PWB-A1 602x2 604x11 609x2 IC901 282 614x3 282 B 202-2 281 PWB-A2 614x2 Q831 IC851 Silicon grease 231x6 615x15 607x3 Belt Connection IC841 201 201-13 226 214 201-14 FF/REW Roller Ass'y C Motor Motor Flywheel Roller Ass'y 201-15 201-12 201-21 201-11 201-20 FF/REW Roller Ass'y Flywheel Ass'y Tape2 FL701 Main Belt 201-1 201-24 201-16 209 D 605x6 616 230 PWB-D 201-10 606x2 PWB-A3 606x2 220 612 222 612 201-25 E 267 221 201-9 268 208 219 201-21 213 M901 225 608 Tape Mechanism 223 233 608 608 601x2 210 613x4 F 225 212 212 201-22 201-8 611x2 201-3 201-2 PT801 201-4 PWB-A4 G 201-5 201-23 201-6 237 203-1 203-2 201-7 203 H 608x2 Note: Only tape mechanism assembly and consumable parts are supplied for replacement purposes. 1 2 3 4 Figure 9 CABINET EXPLODED VIEW (1/2) –9– 5 6 CD-BP160W/180W/1500W/1700W CD-BP160W/180W/1500W/1700W 604x2 205 257 A 236 235 B 243 224 618 244 C CD Mechanism 262 256 241 238 247 274 PWB-E SW3 250x4 275 D 604x2 259 SW1 SW2 251 249 255 252 M3 253 232 248 239 E 246 239 254 263 239 260 242 234 F 239x3 204-2 264 240 204-1 G 245 204 239 204-3 276 258 H 619 PWB-B 1 2 3 4 Figure 10 CABINET EXPLODED VIEW (2/2) – 10 – 5 6 CD-BP160W/180W/1500W/1700W CP-BP180/1500 915 (with Capacitor C1,2) A 904(Left) 905(Right) 909 B 914x4 SP1(L-CH) SP2(R-CH) C 903 914x4 906 SP5(L-CH) SP6(R-CH) D SP3(L-CH) SP4(R-CH) 913x2 912x4 908(1500W ONLY) E 901(Left) 902(Right) 907x2 WOOFER SP1(L-CH) SP2(R-CH) F RD C1,2 Capacitor 2.2µF,50V Electrolytic(N.P.) RD 907x2 G TWEETER SP5(L-CH) SP6(R-CH) BK C1,2 Capacitor 2.2µF,50V Electrolytic(N.P.) WOOFER SP1(L-CH) SP2(R-CH) H SUB WOOFER SP3(L-CH) SP4(R-CH) SUB WOOFER SP3(L-CH) SP4(R-CH) 1 BK 2 3 TWEETER SP5(L-CH) SP6(R-CH) 4 Figure 11 SPEAKER EXPLODED VIEW (1/3) – 11 – 5 6 CD-BP160W/180W/1500W/1700W CP-BP160/1700 915 (with Capacitor C1,2) A 903(CP-BP160) 904(Left) 905(Right) 909 B 914x4 SP1(L-CH) SP2(R-CH) C 903(CP-BP1700) 914x4 906 SP5(L-CH) SP6(R-CH) D SP3(L-CH) SP4(R-CH) 913x2 912x4 908 E 901(Left) 902(Right) 907x2 WOOFER SP1(L-CH) SP2(R-CH) F RD 907x2 TWEETER SP5(L-CH) SP6(R-CH) G BK C1,2 Capacitor 2.2µF,50V Electrolytic(N.P.) WOOFER SP1(L-CH) SP2(R-CH) 1 BK SUB WOOFER SP3(L-CH) SP4(R-CH) SUB WOOFER SP3(L-CH) SP4(R-CH) H C1,2 Capacitor 2.2µF,50V Electrolytic(N.P.) RD 2 3 TWEETER SP5(L-CH) SP6(R-CH) 4 Figure 12 SPEAKER EXPLODED VIEW (2/3) – 12 – 5 6 CD-BP160W/180W/1500W/1700W GBOXS0041AWM1 905x6 A 903 SP1(L-CH) SP2(R-CH) B C 904 D 901 902 E SP1(L-CH) SP2(R-CH) F G BK RD H 1 2 3 4 5 6 Figure 13 SPEAKER EXPLODED VIEW (3/3) COPYRIGHT © 2000 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION Communication Systems Group Quality & Reliability Control Center Higashihiroshima, Hiroshima 739-0192, Japan Printed in Japan A0004-2730DS•HA•M EX • SA • SZ