Download Asus MEL-M 370 User`s manual

Transcript
III. INSTALLATION
Installation Steps
Before using your computer, you must complete the following steps:
1.
2.
3.
4.
5.
6.
Make Motherboard Settings
Install System Memory Modules
Install the Central Processing Unit (CPU)
Install Expansion Cards
Connect Ribbon Cables, Cabinet Wires, and Power Supply
Setup the BIOS Software
1. Motherboard Settings
III. INSTALLATION
Jumpers
WARNING! Computer motherboards, baseboards and components, such as SCSI
cards, contain very delicate Integrated Circuit (IC) chips. To protect them against
damage from static electricity, you should follow some precautions whenever you
work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
1. Keyboard Wake Up (3-pin KBPWR)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing the spacebar) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mAmp on the +5VSB lead. The default is set to Disable
because not all computers have the appropriate ATX power supply. Your computer will not power on if you set this to Enable and if you do not have the right
ATX power supply.
0 1
0 1
0 1
KBPWR
3
2
1
Disable
(Default)
KBPWR
3
2
1
Enable
R
MEL-M
MEL-M Keyboard Power Up
14
ASUS MEL-M User’s Manual