Asus MEL-M 370 User`s manual Download

Transcript
III. INSTALLATION
15. Hard Disk Activity LED (2-pin IDELED)
This connector supplies power to the cabinet’s hard disk or IDE activity LED.
Read and write activity by devices connected to the Primary or Secondary IDE
connectors will cause the LED to light up.
0 1
0 1
0 1
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED
R
MEL-M
III. INSTALLATION
Connectors
MEL-M IDE Activity LED
16. SB-Link™ Connector (6-1 pin SBLINK)
Using Intel’s PC-PCI and serialized IRQ protocols found in this motherboard’s
AGPset, this connector allows Sound Blaster 16 compatibility to AWE64D (Digital) or other PCI audio cards, enabling users to play Real-mode DOS games and
multimedia applications. SB-Link acts as a bridge between the motherboard and
the PCI audio card by providing the DMA and IRQ signals present in the ISA
bus but not available on the PCI bus.
0 1
0 1
0 1
NOTE: Pin 3 is removed to ensure the
correct orientation of the cable on it.
PC/PCI Request
Sideband Signal
R
DGND
2
6
MEL-M
PC/PCI Grant
Sideband Signal
5
1
Serial IRQ
DGND
SBLINK
MEL-M SB-Link™ Header
ASUS MEL-M User’s Manual
29