Siemens 270 series User`s manual Download

Transcript
Preface
Preface
1234567890123456789012345678901212345678901234567890123456789012123456789012345
1234567890123456789012345678901212345678901234567890123456789012123456789012345
1234567890123456789012345678901212345678901234567890123456789012123456789012345
1234567890123456789012345678901212345678901234567890123456789012123456789012345
Thank you for purchasing Digital’s Pro-face GP-270 Series of Graphic Control
Panels (hereafter referred to as the GP unit).
This GP unit, with its advanced user functions and improved performance, is an
upgrade from the earlier GP-250 Series.
Please read this manual carefully as it explains, step by step, how to install and use
the GP correctly.
In its examples, this manual uses the Mitsubishi MELSEC-AnA Series of PLC's
wherever possible, connected in a one-to-one relationship with the GP.
GP-270 Series refers to the following GP model numbers:
GP270-LG11, GP270-SC11(Standard item)
GP270-LG21, GP270-SC21(CE marked units)
GP270-LG31, GP270-SC31(UL/cUL(CSA) marked units)
<Note>
1) It is forbidden to copy the contents of this manual, in whole or in part,
except for the user's personal use, without expressed permission from
Digital Electronics Corporation of Japan
2) The information provided in this manual is subject to change without
notice.
3) This manual has been written with care and attention to detail; however,
should you find any errors or omissions, please contact Digital Electronics and inform them of your findings.
4) Please be aware that we are not responsible for any damages resulting
from the use of our products, regardless of article 3 above.
All company/manufacturer names used in this manual are the registered
trademarks of their respective companies.
© Copyright March 1996, Digital Electronics Corporation
GP-270 Series User's Manual
i