Download Mitsubishi Electric PUY-A42NHA5-BS Specifications
Transcript
Submittal Transmittal TO: David L Wallace & Assoc. CPA 542 Douglas Avenue Dunedin, FL 34698 We are sending you the following: Attached 1st Class Mail Overnight Via: Copies 1 Spec No. M3.0.0 Date: 11/13/2014 Project # 714 - Home2 Suites - G'ville Submittal # S714-08 ATTN: Peter Gray RE: 10A & 10B Under Separate Cover Facsimile Pick-Up/Hand Deliver Description 10A & 10B Split System Remarks: Mitsubishi Mini-Splits were qouted as supplier of mechanical units does not rep. Daikin. Although most other items are based on performanced based equals the owner mentioned the desire to use Daikin specifically. Feasterco will confirm if there is any concern with Mitsubishi. Received By: _________________________________ Date: ________________________ Signed: _______________________________ Title: _________________________________ Copy to: ___________________ Recipient’s Copy Sign & Return File Copy 1000 SW 33 Avenue, Suite 301 ∙ Ocala, FL 34474 ∙ Office: 352.351.1976 ∙ Fax: 352.622.4800 rd ............................ 1622 Hickman Road Jacksonville, FL 32216 (904)807-9899 phone (904)483-3005 fax SUBMITTAL FOR: Plans dated 9/5/14 PROJECT: Home2Suites by Hilton CONTRACTOR: ComfortTemp ENGINEER: Delta G Consulting PRODUCT: Air Conditioner MANUFACTURER: Mitsubishi (M & P-Series) SPEC SECTION: NA FEASTERCO CONSTRUCTION, INC. – SHOP DRAWINGS SUBMITTED BY: Nelson & Company 1622 Hickman Road Jacksonville, FL 32216 George Sadens CHECKED FOR GENERAL CONFORMANCE WITH THE DESIGN CONCEPT, CONSTRUCTION, SIZE AND CONFORMITY TO THE CONTRACT DOCUMENTS. SUBCONTRACTOR SHALL VERIFY ALL DETAILS SUCH AS DIMENSIONS, QUANTITIES AND CAPACITIES. ANY ACTION SHOWN IS SUBJECT TO THE REQUIREMENTS OF THE CONTRACT DOCUMENTS AND DOES NOT RELIEVE THE SUBCONTRACTOR FROM COMPLIANCE WITH THE DOCUMENTS. _____NO EXCEPTIONS TAKEN _____REVISE AND RESUBMIT X _____APPROVED AS NOTED _____REJECTED BY: SUBMITTAL DATE: October 8, 2014 Tom Files DATE: 11/14/14 TABLE OF CONTENTS SECTION 1 CLARIFICATIONS 3 SECTION 2 EQUIPMENT SCHEDULE 5 SECTION 3 UNIT DATA 7 SECTION 4 CONTROLS AND ACCESSORIES 18 A. WALL MOUNTED WIRED CONTROLLER B. DRAIN PAN LEVEL SENSOR C. LOW AMBIENT WIND BAFFLE SECTION 5 WIRING INFORMATION 28 SECTION 6: WARRANTY 33 SECTION 7 I, O, & M MANUALS 36 Page 2 of 36 SECTION 1 CLARIFICATIONS Page 3 of 36 CLARIFICATIONS 1) AHU/CU-10/10A & 10B: Heat Pump Multi Zone (Model: SLZ-KA09/MXZ-20BNNA) AHU/CU-11: Straight Cool (Model: PKA-A18NHA/PUY-A18NHA4) 2) Unit Voltage= 208/1/60 (SEE SECTION 3: UNIT DATA). 3) Refrigerant = R410A (SEE SECTION 3: UNIT DATA). 4) SLZ-KA09 indoor units have internal condensate lift mechanism & float switch (SEE SECTION 3: UNIT DATA). 5) Wall mounted wired controller (SEE SECTION 4: CONTROLS & ACCESSORIES). 6) Drain pan level sensor provided for PKA-18 (SEE SECTION 4: CONTROLS & ACCESSORIES). 7) Low ambient wind baffle for PUY-18 outdoor unit only, low ambient is not available for MXZ-2B20NA (SEE SECTION 4: CONTROLS & ACCESSORIES). 8) Warranty: Entire unit (parts) = 5 years, 7 years compressor (SEE SECTION 6: WARRANTY). 9) Disconnects provided by others. 10) Coil coatings have been deleted for VE. Page 4 of 36 SECTION 2 EQUIPMENT SCHEDULE Page 5 of 36 1622 Hickman Road Jacksonville, FL 32216 PH 904.807.9899 FAX 904.483.3005 Home2Suites by Hilton Tag Model Location CU-10 AHU-10A AHU-10B CU/AHU-11 MXZ-2B20NA1 SLZ-KA09NA SLZ-KA09NA PUY-A18NHA/PKA-A18HA4 POOL RESTROOM POOL RESTROOM POOL RESTROOM PBX ROOM Page 6 of 36 SECTION 3 UNIT DATA Page 7 of 36 M-SERIES SUBMITTAL DATA: MXZ-2B20NA-1 MULTI-INDOOR INVERTER HEAT-PUMP SYSTEM Job Name: Home2Suites by Hilton Location: Purchaser: Engineer: Submitted to: For System Designation: Schedule No.: Date: 10/8/2014 Reference ■ Approval Construction TAG: CU-10 GENERAL FEATURES • Compact side discharge outdoor unit • Wireless or wired remote controller, indoor unit dependent • Quiet operation • Automatic fan speed control • Auto restart following power outage • Self-check function—integrated diagnostics • Advanced microprocessor control • Limited warranty: five years parts and seven years compressors ACCESSORIES □□ Air Outlet Guide (MAC-856SG) □□ 3/8" x 1/2" Port Adapter (MAC-A454JP; for use with 15,000 Btu/h Indoor units) Cooling* (Non-ducted/Ducted) Heating at 47°F* (Non-ducted/Ducted) Heating at 17°F* (Non-ducted/Ducted) Electrical Requirements Voltage Outdoor Unit: MXZ-2B20NA-1 Specifications Unit Type Rated Capacity Btu/h Model Name MXZ-2B20NA-1 18,000 / 20,000 Maximum Capacity Btu/h 20,000 / 20,000 Total Input W Rated Capacity Btu/h 22,000 / 22,000 Maximum Capacity Btu/h 25,500 / 25,500 Total Input W Rated Capacity Btu/h Total Input W Voltage, Phase, Hertz A A V V Power Supply Recommended Fuse/Breaker Size MCA Indoor - Outdoor S1-S2 Indoor - Outdoor S2-S3 Compressor Blower Motor (ECM) Cooling Sound Pressure Level (Non-ducted/Ducted) Heating External Dimensions (H x W x D) Net Weight External Finish Refrigerant Pipe Size O.D. ― Liquid (High Pressure) Four Ports Gas (Low Pressure) Max. Refrigerant Line Length Max. Piping Length for Each Indoor Unit Max. Refrigerant Pipe Height If Indoor Unit is Above Outdoor Unit Difference If Indoor Unit is Below Outdoor Unit Connection Method Refrigerant F.L.A. dB(A) In. / mm Lbs. / kg (In. / mm) Ft. Ft. Ft. 1,440 / 2,190 1,650 / 1,780 12,500 / 12,500 1,350 / 1,430 208 / 230V, 1-Phase, 60 Hz 20 15 AC 208 / 230 DC ±24 DC Inverter-driven Twin Rotary 0.96 49 51 27-15/16 x 33-1/16 x 13 / 710 x 840 x 330 130 (59) Munsell No. 3Y 7.8 / 1.1 1/4 / 6.35 A,B: 3/8 / 9.52 164 82 49 33 Flared R410A (For data on specific indoor units, see the MXZ-B Technical and Service Manual.) * Rating Conditions per AHRI Standard: Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB Cooling | Outdoor: 95º F (35º C) DB / 75º F (24º C) WB Heating at 47ºF | Indoor: 70º F (21º C) DB / 60º F (16º C) WB Heating at 47ºF | Outdoor: 47º F (8º C) DB / 43º F (6º C) WB Heating at 17º F | Indoor: 70º F (21º C) DB / 60º F (16º C) WB Heating at 17º F | Outdoor: 17º F (-8º C) DB / 15º F (-9º C) WB Specifications are subject to change without notice. © 2013 Mitsubishi Electric US, Inc. Page 8 of 36 SPECIFICATIONS: MXZ-2B20NA-1, contd. Operating Range: Cooling Heating Maximum Minimum Maximum Minimum Energy Efficiencies: Indoor Intake Air Temp. 95º F (35º C) DB 71º F (22º C) WB 67º F (19º C) DB 57º F (14º C) WB 80º F (27º C) DB 67º F (19º C) WB 70º F (21º C) DB 60º F (16º C) WB Outdoor Intake Air Temp. Indoor Unit Type 115º F (46º C) DB 14º F (-10º C) DB 75º F (24º C) DB 65º F (18º C) WB 6º F (-14º C) DB 5º F (-15º C) WB SEER EER HSPF COP @ 47°F COP @ 17°F Non-ducted (09 + 09) 18.0 12.5 8.9 3.9 2.71 Ducted and Non-ducted 16.75 10.8 8.7 3.77 2.64 Ducted (09 + 12) 15.5 9.10 8.5 3.62 2.56 Multi-zone Indoor/Outdoor Combination Table MXZ-2B20NA-1 MSZ-FE* MSZ-GE* MFZ* SEZ* SLZ* PCA (A24)* PLA (A12/18/24)* PEAD (A24)* OK 06/09/12/15 OK 18, 24 NO 09/12 OK 18 NO 09/12/15 OK 18 NO OK NO NO NO * Refer to indoor unit submittal. Notes: • Minimum of two Indoor Units must be connected to the MXZ-2B20NA-1. • Minimum installed capacity cannot be less than 12,000 Btu/h. • There are NO indoor units larger than 24,000 Btu/h that can be connected to MXZ Systems. • PLA-A12BA can NOT be connected with MXZ-2B20NA-1/MXZ-3B24NA-1/MXZ-3B30NA-1/MXZ-4B36NA-1. • System can operate with only one Indoor Unit turned on. (see Operation Performance Table next page for single Indoor Unit performance). • May connect to any style indoor unit or combination. • Information provided at 208/230V. Refer to the MXZ Outdoor Unit Service Manual for detailed specifications and additional information per Indoor Unit Combination. Notes: Specifications are subject to change without notice. © 2013 Mitsubishi Electric US, Inc. Page 9 of 36 MXZ-2B20NA-1 OPERATION PERFORMANCE Operation Performance for Indoor Unit Combinations (Unit A + Unit B) 6 9 12 15 6+6 6+9 6 + 12 6 + 15 9+9 9 + 12 9 + 15 12 + 12 Unit A 6,000 7,400 9,000 10,900 - 11,000 12,000 13,600 15,000 18,000 6,000 7,400 6,000 7,400 6,000 7,400 5,800 6,400 9,000 10,900 - 11,000 8,500 9,500 7,500 8,250 10,000 11,000 Cooling Capacity Range (Btu/h) Heating Capacity Range (Btu/h) Unit B 6,000 7,400 9,000 10,900 - 11,000 12,000 13,600 14,200 15,600 9,000 10,900 - 11,000 11,500 12,500 12,500 13,750 10,000 11,000 Power Usage Range (W) Total Range 5,400 - 9,000 5,200 - 14,400 5,400 - 9,000 5,200 - 15,400 5,400 - 12,000 5,200 - 16,400 5,400 - 15,000 5,200 - 21,100 7,800 - 15,000 8,500 - 25, 500 7,800 - 18,000 8,500 - 25,500 7,800 - 20,000 8,500 - 25,500 7,800 - 23,000 8,500 - 25,500 7,800 - 20,000 8,500 - 25,500 7,800 - 23,000 8,500 - 25,500 7,800 - 23,000 8,500 - 25,500 7,800 - 23,000 8,500 - 25,500 490 - 680 480 - 1,400 490 - 750 480 - 1,430 490 - 1,010 480 - 1,460 490 - 1,560 480 - 2,100 510 - 1,820 520 - 2,410 630 - 1,820 520 - 2,520 630 - 1,820 520 - 2,520 630 - 2,230 520 - 2,520 630 - 1,820 520 - 2,620 630 - 2,230 520 - 2,620 630 - 2,230 520 - 2,620 630 - 2,230 520 - 2,620 Specifications are subject to change without notice. © 2013 Mitsubishi Electric US, Inc. Page 10 of 36 DIMENSIONS: MXZ-2B20NA-1 FORM# MXZ-2B20NA-1 for Multiple Indoor Unit Styles - 201311 1340 Satellite Boulevard Suwanee, GA 30024 Tele: 678-376-2900 • Fax: 800-889-9904 Toll Free: 800-433-4822 www.mehvac.com Specifications are subject to change without notice. © 2013 Mitsubishi Electric US, Inc. Page 11 of 36 SUBMITTAL DATA: SLZ-KA09NA M-SERIES 9,000 BTU/H CEILING-CASSETTE INDOOR UNIT FOR MXZ MULTI-ZONE HEAT-PUMP SYSTEMS Job Name: Home2Suites by Hilton System Reference: Date: 10/8/2014 TAG: AHU-10A & 10B SPECIFICATIONS Cooling Capacity* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,400 Btu/h Heating Capacity at 47°F* . . . . . . . . . . . . . . . . . . . . . 10,900 Btu/h SLZ-KA09NA GENERAL FEATURES • Four-way 2'x2' ceiling-cassette indoor unit for ceiling recessed applications • Built-in drain mechanism for condensate removal; lifts to 19-11/16" • Wide air-flow pattern for better air distribution • Design features ventilation air intake knockout • Long-life air filter included with indoor unit • Indoor unit powered from outdoor unit using A-Control • Choice of fan speed: Low, Medium, High • Automatic restart following a power outage • Limited warranty: five years parts and seven years compressors ACCESSORIES Indoor Unit □□ Grille (SLP-15AAUW; required - shipped with unit) Controller Options □□ Wireless Wall-mounted Remote Controller Kit (MHK1)* □□ Portable Central Controller (MCCH1)* □□ Outdoor Air Sensor (MOS1)* □□ Wired Wall-mounted Controller (PAR-31MAA)* □□ Simple MA Remote Controller (PAC-YT53CRAU)* *See Submittal for information on each option. □□ Remote Temperature Sensor (M21-JKO-307) □□ Hand-held Wireless Remote Controller (PAR-FL32MA;req.PAR-FA32MA-E) □□ Wireless Signal Receiver PAR-FA32MA (for PAR-FL32MA) □□ Lockdown Bracket for Hand-held Controller (RCMKP1CB) * Rating Conditions per AHRI Standard Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB Cooling | Outdoor: 95º F (35º C) DB / 75º F (24º C) WB Heating at 47ºF | Indoor: 70º F (21º C) DB / 60º F (16º C) WB Heating at 47ºF | Outdoor: 47º F (8º C) DB / 43º F (6º C) WB (For data on specific indoor units [all ducted, all non-ducted, and both ducted and non-ducted] combinations, see the MXZ Technical and Service Manual.) Electrical Requirements Power Supply . . . . . . . . . . . . . . . . . . . 208 / 230V, 1-Phase, 60 Hz MCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A Voltage Indoor - Outdoor S1-S2 . . . . . . . . . . . . . . . . . . . . . . . AC 208 / 230V Indoor - Outdoor S2-S3 . . . . . . . . . . . . . . . . . . . . . . . . . . . DC ±24V Fan Motor (ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.23 F.L.A. Airflow (Lo - Med - Hi) . . . . . . . . . . . . . . . . . . 280 - 320 - 350 Dry CFM 250 - 290 - 320 Wet CFM Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene Honeycomb Sound Pressure Level (Lo - Med - Hi) . . . . . . . . . 29 - 32 - 38 dB(A) DIMENSIONS W D H UNIT INCHES / MM 22-7/16 / 570 22-7/16 / 570 9-1/4 / 235 GRILLE INCHES / MM 25-5/8 / 650 25-5/8 / 650 13/16 / 20 Weight (Unit/Grille) Lbs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 / 7 kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 / 3 External Finish (Unit/Grille) . . . . . . . . . . Galvanized-steel Sheets / Munsell 6.4Y 8.9 / 0.4 Field Drainpipe Size O.D. . . . . . . . . . . . . . . . . . . . . . 1-1/4” / 32 mm Refrigerant Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R410A Refrigerant Pipe Size O.D. Gas Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" / 9.52 mm Liquid Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" / 6.35 mm Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flared Specifications are subject to change without notice. © 2014 Mitsubishi Electric US, Inc. Page 12 of 36 DIMENSIONS: SLZ-KA09NA Detail drawing of fresh air intake Ceiling hole Fresh air intake 12 1-7/32(31) 3-7/16(87) 2-7/32(56) 19/32~1-15/32(15~37) 22-11/16~24-13/32(576~620) Ceiling hole Grille Ceiling surface 1-1/16 Terminal block +3/16 (27 +5) 0 0 25/32(20) 7-19/32(193) Refrigerant pipe (liquid) Wiring entry 7-5/32(182) Drain pipe VP-25 connection (O.D. 1-1/4( 32)) Suspension bolt M10 or W3/8 9-1/16(230) 1-7/8(48) 7-15/16(202) 8-3/16(208) Refrigerant 21/32(17) pipe (gas) 9-1/4(235) 2-1/14(57) Ceiling surface 7-27/32(199) 13-27/32(352) 13-3/16(335) 1-1/2~2-9/32(38~58) Suspension bolt lower edge 2-19/32(66) 2-7/8( 73.4) Cut out hole 0 22-7/16(570) 3-21/32(93) 25-19/32(650) 11-27/32(301) Air outlet hole 1-3/8(35) 4-3/4(121) 22-7/16(570) 13-3/16(335) 22-11/16~24-13/32(576~620) 16-17/32(420) Suspension bolt pitch Suspension bolt pitch 19/32~1-15/32(15~37) Refrigerent pipe (liquid) Refrigerent pipe (gas) SLZ-KA09NA 1/4 inch ( 6.35mm) flared connection 3/8 inch ( 9.52mm) flared connection SLZ-KA12NA 1/4 inch ( 6.35mm) flared connection 3/8 inch ( 9.52mm) flared connection SLZ-KA15NA 1/4 inch ( 6.35mm) flared connection 1/2 inch ( 12.7mm) flared connection Models Brand label 2-5/32(55) Grille V/M Drain hole V/M Auto vane 14-27/32(377) Air intake hole 11-27/32(301) Air outlet hole 25-19/32(650) 1(25) 3- 1/8( 2.8) Burring hole 20-7/8(530) 120 19/32~1-15/32(15~37) 3-15/16( 100) 4-21/32(118) 19/32~1-15/32(15~37) Unit : inch (mm) V/M V/M Air intake grille Vane motor 14-27/32(377) Air intake hole 1-3/8(35) 2-5/32(55) 1340 Satellite Boulevard Suwanee, GA 30024 Toll Free: 800-433-4822 www.mehvac.com FORM# SLZ-KA09NA for MXZ MULTI-ZONE SYSTEMS - 201409 Specifications are subject to change without notice. © 2014 Mitsubishi Electric US, Inc. Page 13 of 36 P-SERIES SUBMITTAL DATA: PKA-A18HA4 & PUY-A18NHA4 (-BS) 18,000 BTU/H WALL-MOUNTED AIR-CONDITIONING SYSTEM Job Name: Home2Suites by Hilton System Reference: Date: 10/8/2014 TAG: CU/AHU-11 Indoor Unit: PKA-A18HA4 Outdoor Unit: PUY-A18NHA4 (-BS) GENERAL FEATURES • Wall-mounted indoor unit for residential and commercial applications • Shiny-white–exterior plastic; compact design • Quiet operation—both indoor and outdoor units • Self-check function—integrated diagnostics • Limited warranty: five years parts and seven years compressors UNIT OPTION □□ Standard Model……………..........…….................PUY-A18NHA4 □□ Sea Coast (BS) Model…….…………………..PUY-A18NHA4-BS ACCESSORIES SEACOAST PROTECTION • External Outer Panel: - Phosphate coating + Acrylic-Enamel coating • Fan Motor Support: - Epoxy resin coating (at edge face) • Separator Assembly ; Valve Bed: - Epoxy resin coating (at edge face) • Screws (used outer side): - Zinc nickel coating 5μm + Polyvinylidene chloride coating “Blue Fin” treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants.. Indoor Unit □□ Condensate Pump (BlueDiamond X87-711/721; 115/230V) □□ Condensate Pump (Sauermann SI30-115/230; 115/230V) Outdoor Unit □□ Drain Pan (PAC-SG63DP) □□ Drain Socket (PAC-SH71DS) □□ Three-pole Disconnect Switch (TAZ-MS303) □□ Wind Baffle (WB-PA1) □□ Air Outlet Guide (PAC-SG58SG) □□ Mounting Base (DSD-400N) □□ Mounting Pad (ULTRILITE2) □□ Wall-mounting Brackets (CWMB1) Controller Options □□ Wireless Wall-mounted Remote Controller Kit (MHK1)** □□ Portable Central Controller (MCCH1)** □□ Outdoor Air Sensor (MOS1)** □□ Wired Wall-mounted Controller (PAR-31MAA)** □□ Simple MA Remote Controller (PAC-YT53CRAU)** **See Submittal for information on each option. □□ M-NET Adapter (PAC-SF83MA) □□ CN51 Connector for Multiple Remote Controller Adapters Duct Fan Controller (PAC-725AD) □□ CN32 Connector for Remote On/Off (PAC-715AD) □□ Remote Temperature Sensor (PAC-SE41TS) □□ Remote Operation Adapter - Display and On/Off (PAC-SF40RM) □□ Hand-held Wireless Remote Controller (PAR-FL32MA; Receiver Built-in) □□ Lockdown Bracket for Hand-held Controller (RCMKP1CB) □□ Control/Service Tool (PAC-SK52ST) Specifications are subject to change without notice. © 2014 Mitsubishi Electric US, Inc. Page 14 of 36 SPECIFICATIONS: PCA-A24KA4 & PUY-A24NHA4 SPECIFICATIONS: PKA-A18HA4 & PUY-A18NHA4 (-BS) Cooling* Rated Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18,000 Btu/h Minimum Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,000 Btu/h SEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15.3 Btu/h/W EER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 Btu/h/W Total Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,240 W * Rating Conditions per AHRI Standard Cooling | Indoor: 80º F (27º C) DB / 67º F (19º C) WB Cooling | Outdoor: 95º F (35º C) DB / 75º F (24º C) WB Electrical Requirements Power Supply . . . . . . . . . . . . . . . . . . . 208 / 230V, 1-Phase, 60 Hz Recommended Fuse/Breaker Size . . . . . . . . . . . . . . . . . . . . . .15 A Voltage Indoor - Outdoor S1-S2 . . . . . . . . . . . . . . . . . . . . . . . AC 208 / 230V Indoor - Outdoor S2-S3 . . . . . . . . . . . . . . . . . . . . . . . . . . . DC ±24V OPERATING RANGE Cooling Maximum Minimum Indoor Intake Air Temp. 95º F (35º C) DB 71º F (22º C) WB 67º F (19º C) DB 57º F (14º C) WB Outdoor Intake Air Temp. 115º F (46º C) DB 0º F** (-18º C) DB ** With optional wind baffle accessory installed. If not installed, the minimum temperature will be 23º F (-5º C) DB. Indoor Unit MCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A Blower Motor (ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.33 F.L.A. Blower Motor Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 W Airflow (Lo - Mid - Hi) . . . . . . . . . . . . . . . . 320 - 370 - 425 Dry CFM 290 - 335 - 380 Wet CFM Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene Honeycomb Sound Pressure Level (Lo - Mid - Hi) . . . . . . . . . . . . . . . . . . . 36 - 40 - 43 dB(A) SHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.68 Moisture Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 pt./h DIMENSIONS W D H UNIT INCHES / MM 35-3/8 / 898 9-13/16 / 249 11-5/8 / 295 Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 lbs. / 13 kg External Finish . . . . . . . . . . . . . . . . . . . . . Munsell No. 1.0Y 9.2 / 0.2 Field Drainpipe Size O.D. . . . . . . . . . . . . . . . . . . . . . . 5/8" / 16 mm Outdoor Unit Compressor . . . . . . . . . . . . . . . . . . . DC Inverter-driven Twin Rotary MCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 A MOCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 A Fan Motor (ECM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.35 F.L.A. Sound Pressure Level Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 dB(A) DIMENSIONS W D H INCHES / MM 31-1/2 / 800 11-13/16 + 7/8 / 300 + 23 23-5/8 / 600 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 lbs. / 40 kg External Finish . . . . . . . . . . . . . . . . . . . . . . Munsell No. 3Y 7.8 / 1.1 Refrigerant Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R410A Refrigerant Pipe Size O.D. Gas Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" / 12.7 mm Liquid Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" / 6.35 mm Max. Refrigerant Pipe Length . . . . . . . . . . . . . . . . . . . . 100' / 30 m Max. Refrigerant Pipe Height Difference . . . . . . . . . . . 100' / 30 m Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flared Notes: Specifications are subject to change without notice. © 2014 Mitsubishi Electric US, Inc. Page 15 of 36 DIMENSIONS: PKA-A18HA4 (-BS) Specifications are subject to change without notice. © 2014 Mitsubishi Electric US, Inc. Page 16 of 36 DIMENSIONS: PUY-A18NHA4 (-BS) Clearance space around the outdoor unit 1340 Satellite Boulevard Suwanee, GA 30024 Toll Free: 800-433-4822 www.mehvac.com FORM# PKA-A18HA4 - PUY-A18NHA4 (-BS) - 20140624 Specifications are subject to change without notice. © 2014 Mitsubishi Electric US, Inc. Page 17 of 36 SECTION 4 CONTROLS & ACCESSORIES A. Wall Mounted Wired Controller B. Drain Pan Level Sensor C. Low Ambient Wind Baffle Page 18 of 36 SECTION 4A A. Wall Mounted Wired Controller Page 19 of 36 M- and P-SERIE Model: Model: Job Name: Purchaser: Job Name: Submitted to: Purchaser: 2.Submitted Local remote to: System Designation: PAR-31MAA M- and PAR-31MAA Location: Date: Engineer: Location: controller For Engineer: P-SERIES Date: Reference For Schedule Reference No.: Approval Approval Constructio Construction System 2-1. MA Designation: remote controller [PAR-31MAA] Schedule No.: Controller 2. Local remote controller QTY=3 BACKLIT MA REMOTE CONTROLLER (PAR-31MAA) BACKLIT MA REMOTE CONTROLLER (PAR-31MAA) SPECIFICATIONS :N :Each group 2. Schedule and timer setting SPECIFICATIONS • Controls group operation for up to 16 indoor units in a single grou Setting • Controls group Item operation for up to 16 indoorDescription units in a single group • Features selectable multi-lingual LCD (English, Spanish, and Timer ON/OFF timer • Features selectable multi-lingual LCD (English, Spanish, and French) Turns ON and OFF daily at a set time. French) • Time can beand 5-minute increments. • Supports both Fahrenheit • Supports both Fahrenheit and Celsiusset inCelsius • It is also possible to set the ON time only or the OFF time only. Room • User functions allow user to set • User functions allow user to set Auto-OFF timer Set temp. Cool Auto Turns off the unit after a certain period of operation. - On/Off - On/Off • Operation time can be set to a value from 30 to 240 minutes in - Operation modes modes cool, heat, dry, heat, fan - Operation cool, dry, fan 10-minute increments. - Set temperature Set temperature Mode Temp. Fan - Fan speed setting Weekly timer Weekly ON/OFF times and set temperatures can be set. - Fan speed setting • Time can be set in 5-minute increments. Up to 8 schedule - Airflow direction Airflow direction patterns can be set per day of the week. • Timer- Operation: * Not valid when the ON/OFF timer is set. • Timer Operation: - Weekly Timer: On/Off/Temperature setting up to 8 times per day of Night setback The temperature range and the start/stop the week in 1-minute increments - Weekly Timer: On/Off/Temperature settingtimes up can to be 8 set. times per day - Simple and Off time can be set once within 72-hour theTimer: weekOn in 1-minute increments period in 1-hour increments - Simple Timer: On and Off time can be set once within 72-hour Restriction - Auto-off 3. Timer: Turns indoorsettings unit Off based on countdown time up :Each group :N period inItem 1-hourincrements increments to 4-hours in 30-minute Description Setting Auto-off Timer: Turns indoor unit Offsensed basedbyeither on countdown time u • Room- Temperature: Displays room temperature the The following operation can be prohibited makingatcertain Allows/disallows indoortounit (default) at settings the remote controller 4-hours inor30-minute on increments the centralized controller: ON/OFF, operation mode local operation Functions setting, From temperature filter sign reset. the • Set•Temperature Range Limit: the setting, Backlitand MA Controller, Room Temperature: Displays room temperature sensed either at * While an operation is prohibited, the operation icon lights up allowable set unit temperature range can beremote reducedcontroller for cool and heat :Not available :Each group 1. Operation/Display indoor (default) or at the (only on the Main display in the "Full" mode). modes Item Description Setting Display • Set Temperature Range Limit: From the Backlit MA Controller, the • Special Function P-Series) OperationRotation/Backup lock The following(Lead/Lag operation can for be prohibited respectively: ON/OFF, ON/OFF Switches between ON and OFF. set temperature can be setting, reduced for direction cool and hea operation moderange setting, temperature and airflow • Staticallowable pressure setting (model dependent) modes • Fan speed setting for usesetting. with supplemental heating function Operation mode Switches among Cool/Dry/Fan/Auto/Heat. switching (model dependent) • Special FunctionThe Rotation/Backup formode P-Series) room temperature range(Lead/Lag for each operation can be Temperature restricted. • Set•P-Series twinning function restriction The temperature can be set within the following range. SEZrange Static Pressure Setting Room temp. • Function Lock Out: Prohibits all functions or all functions except Cool/Dry : 19°C - 30°C (14°C - 30°C) / 67°F - 87°F (57°F - 87°F) setting *3 • Supplemental heat The function units operate enable/disable at the preset temperature after a designated Auto return Heat : 17°C - 28°C (17°C - 28°C) / 63°F - 83°F (63°F - 83°F) On/Off from the backlit MA controller period. • Set P-Series twinning function Auto : 19°C - 28°C (17°C - 28°C) / 67°F - 83°F (63°F - 83°F) • Addressing: No addressing required (Time can be set to a value from 30 to 120 in 10-minute ( ) For PEFY/PFFY by setting DipSW 7-1 to ON and limits to NI6H fan speed only. • Function Prohibits all functions or all functions except increments.) • Wiring: connectsLock usingOut: two-wire, stranded, non-polar control wire to Changes fan speed. * Not valid when the temperature range is restricted. Fan speed from theterminal backlit controller indoorOn/Off unit connection orMA control adapter setting (MAC-333IF for * Available fan speeds vary depending on the model. setting M-Series) requires wiringpassword forrequired indoor unitfor grouping • Addressing: No addressing Administrator (required schedule setting etc.) and password crossover password for test run and function setting Air flow direction Changes airflow direction. • Dimensions: x 3/4 xMaintenance 4-3/4" two-wire, (120 x 19 (required x stranded, 120 mm) • Wiring:4-3/4 connects using non-polar control wire Fri setting * Available airflow directions vary depending on the model. Louver setting Switches between louver ON/OFF. Notes: Ventilation equipment control Auto descending panel *1 Notes: backlight Interlocked setting and interlocked operation setting with the City Multi LOSSNAY units can be made. The Stop/Low/High settings of the ventilation equipment can be controlled. Raises and lowers the automatic elevating panel. Pressing any button turns the backlight on and it will stay lit for a certain period of time depending on the screen. Main display mode setting The Main display can be displayed in two different modes: "Full" and "Basic." Clock *2 Date (year/month/day) and time (hour/minute) can be set. The set time as well as the day of the week will be displayed on the Main display. It is also possible to set not to display the time on the Main display. Clock display The clock can be displayed in 12-hour format (AM/PM before or after the time) and 24-hour format. Room temp. display *3 Displays the room temperature on the Main display in the "Full" mode during operation. When an error occurs, an error code and the unit address appear. Air conditioning unit model, serial number, and contact Specifications arenumber subjectcan to be change withoutwhen notice. set to appear an error occurs. (The above © 2013 Mitsubishiinformation Electric US, Inc.needs to be entered in advance.) * An error code may not appear depending on the error. Error information Filter information A filter sign will appear when it is time to clean the filter. etc.) can be set. indoor unit connection terminal or control adapter (MAC-333IF fo M-Series) requires crossover wiring for indoor unit grouping :N :Each group 4. Miscellaneous items • Dimensions: 4-3/4 x 3/4 x 4-3/4" (120 x 19 x 120 mm) Item Language Selection Description Setting Select the display language from the following 8 languages. English, French, German, Spanish, Italian,Portuguese, Swedish, and Russian Contrast Adjusts LCD contrast. Manual vane Angle *1 Fixes the vane position for each air outlet. Service *1 Contains Test run, Function setting, Refrigerant volume check, Refrigerant leak check, Smooth maintenance, Request code, and Error history. *1 This function is active only for the units that support the function. *2 The clock is accurate within 50 seconds per month (at the temperature of 25ºC [77°F]). The clo backed up for 7 days. *3 Temperature will be displayed either in Centigrade in 0.5- or 1-degree increments, or in Fahren depending on the indoor unit model and the display mode setting on the remote controller. System example Page 20 of 36 12 Model: PAR-31MAA - DIMENSIONS Unit:mm[in.] (Rear view) 46 [1-13/16] 46 [1-13/16] 83.5 [3- 9 /32 ] (Rear view) 19 [ 3/4 ] 83.5 [3- 9 /32 ] (Side view) 120 [4- 3/4 ] 120 [4- 3/4 ] (Front view) 1340 Satellite Boulevard FORM# PAR-31MAA - 201309 Specifications are subject to change without notice. © 2013 Mitsubishi Electric US, Inc. Suwanee, GA 30024 Tele: 678-376-2900 • Fax: 800-889-9904 Toll Free: 800-433-4822 www.mehvac.com Page 21 of 36 SECTION 4B B. Drain Pan Level Sensor Page 22 of 36 SUBMITTAL DATA: DPLS1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DRAIN PANEL LEVEL SENSOR / LEVEL CONTROL Job Name: Home2Suites by Hilton Location: Purchaser: Engineer: Submitted to: For System Designation: Schedule No.: QTY=1 GENERAL FEATURES Reference Date: 10/8/2014 ■ Approval Construction COMPONENTS • The DPLS1 Drain Pan Level Sensor / Control provides protection against drain pan overflow in Mitsubishi Electric Mr. Slim and CITY MULTI Indoor Units. It will sense a high condensate level in the drain pan. Should this occur the control shuts down the indoor unit before an overflow can occur. A thermistor error code will be produced should the DPLS1 activate indicating a fault which must be resolved before the unit re-starts Control Box Water Sensor Splice Connector M2 Wire Harness P Wire Harness M1 Wire Harness • Provides electronic overflow protection for Drain Pans in all Mr. Slim and CITY MULTI indoor units: MFZ, MS, MSY/Z, SEZ, SLZ, PCA/PCFY, PDFY, PEA/PEAD/PEFY, PKA/PKFY, PLA, PLKA/PLFY, PMFY, and PVFY • Meets requirements as listed alternative to secondary drain pans in all indoor unit installations covered by the International Mechanical Code and adaptations ground level. • Powered by a twenty-year life Lithium battery, factory installed prior to shipment. No external electric power needed for operation. There is an audible indication of low battery condition, should it ever need to be replaced. Type of Harness Indoor Unit Models M2 Wire Harness MS MFZ MSZ/Y PKA PEA(D) SEZ P Wire Harness M1 Wire Harness Connector to Indoor Unit Control Board Connector to Thermistor Connector to Control Box 2 pin, female connector (with black heat shrink) to CN111 2 pin, male connector to: RT11 (Room Temp. Thermistor) 2 pin, male connector 2 pin, female connector to CN20 2 pin, male connector to: TH1 (Room Temp. Thermistor) 2 pin, female connector to CN20, CN21 or CN29 2 pin, male connector to: • TH1 (Room Temp. Thermistor) or TH22 (Pipe Temp. and • Thermistor/Liquid) or TH23 (Pipe Temp Thermistor/Gas) PCA PLA SLZ PKFY-P**NBMU-E PLFY-P**NCMU-E PMFY-P**NBMU-E PVFY-P**E00A PEFY-P**NMHU-E PLA PKA PCA PEA(D) SEZ PKFY-P**NH/ KMU-E PLFY-P**NBMU-E PCFY-P**NKMU-E PEFY-P**NMS/AU-E 4 pin, male connector to: 4 pin, female connector to CN44 • TH2 (Pipe Temp.Thermistor/ Liquid) and • TH5 (Pipe Temp. Thermistor/ Gas) 4 pin, male connector to: RT12 (Coil Temp. Thermistor) MS 4 pin, female connector to CN112 MSZ/Y MFZ 2 pin, male connector 4 pin, female connector to CN113 2 pin, male connector 4 pin, male connector to: • RT12 (Coil Temp. Thermistor – Main) and • RT13 (Coil Temp. Thermistor – Sub) 4 pin, male connector to: RT15 (Coil Temp. Thermistor) © 2011 MITSUBISHI ELECTRIC & ELECTRONICS, INC. Page 23 of 36 DIMENSIONS: DPLS1 CONTROL BOX C .61±.01 15.4±.1 1.71±.01 43.4±.1 .39±.01 9.8±.1 1.41±.01 35.8±.1 .79±.01 20.2±.1 1.05±.01 26.6±.1 1.40±.005 35.5±.1 .73±.01 18.4±.1 WATER SENSOR 5 9 .800±.005 20.3±.1 6 7 1.073±.005 27.2±.1 8 19 .060±.005 1.5±.1 .500±.005 12.7±.1 .125±.005 3.2±.1 .250±.005 6.4±.1 MANUFACTURED FOR : FORM# DPLS1- 201109 © 2011 MITSUBISHI ELECTRIC & ELECTRONICS, INC. 3400 Lawrenceville Suwanee Rd Suwanee, GA 30024 Tele: 678-376-2900 • Fax: 800-889-9904 Toll Free: 800-433-4822 (#3) www.mehvac.com Specifications are subject to change without notice. Page 24 of 36 SECTION 4C C. Low Ambient Wind Baffle Page 25 of 36 Submittal Data: Wb-Pa1/Wb-Pa2 . ... .WinD baffle baffle ubmittal Data: Wb-Pa1/Wb-Pa2 . . .. .. ...................................................................................................................................................................................................................................................................................................................................................................................WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 ..WinD . .WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..Wind . .. .. .. .. .. .. .. .. ..baffle . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ... ... ... ... ...WinD . ..WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . . .WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . .WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .baffle .........WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . ....baffle .......baffle ..baffle baffle wB-PA1 / WB-PA2 / wb-PA3 Submittal Data: Wb-Pa1/Wb-Pa2 ...WinD .. ..WinD .WinD baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD . .WinD Job Name: Location: Date: ubmittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . . . . .WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD ob Name: Location: Date: Submittal Data: Wb-Pa1/Wb-Pa2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .baffle .WinD baffle Submittal Data: Wb-Pa1/Wb-Pa2 . . . .WinD Job Name: Location: Date: Submittal Data: Wb-Pa1/Wb-Pa2 .WinD Submittal . . . . . . . . . . . . . . . . . . . . .Location: baffle SubmittalData: Data:Wb-Pa1/Wb-Pa2 Wb-Pa1/Wb-Pa2 . Location: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Date: . .Date: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..WinD . ..WinD baffle Job Name: Job Name: Job Name: Location: Date: Manufactured for Mitsubishi Electric US, inc. Job Name: Location: Date: Job Name: Location: Date: Job Name: Location: Date: Purchaser: Engineer: Job Name: Location: Date: urchaser: Engineer: Job Name: Location: Date: Job Name: Location: Date: Job Name: Location: Date: Job Name: Location: Date: Purchaser: Engineer: ob Name: Location: Date: Job Name: Location: Date: Purchaser: Engineer: Job Name: Location: Date: Job Name: Location: Date: Designed for P-Series and PUMY Outdoor Units Only Job Name: Location: Date: Job Name: Location: Date: Purchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Submitted to: For Reference Approval Construction Purchaser: Engineer: ubmitted to: For Reference Approval Construction Purchaser: Engineer: Purchaser: Engineer: Submitted to: For Reference Approval Construction Job Name: urchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Submitted to: For Reference Purchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Purchaser: Engineer: Submitted to: For Reference Approval Construction Submitted to: Home2Suites by Hilton For Reference Approval Approval Construction Construction Submitted to: For Reference Approval Construction Submitted to: For Reference Approval Construction Submitted to: For Reference Approval Construction Submitted to: For Reference Approval Construction System Designation: Schedule No.: ystem Designation: Schedule No.: Submitted to: For Reference Approval Construction Submitted to: For Reference Approval Construction Submitted Submitted to: to: For For Reference Reference Approval Approval Construction Construction Submitted to: For Reference Approval Construction System Designation: Schedule No.: Schedule Reference: Date: ubmitted to: ForSchedule Reference Approval Construction 10/8/2014 System Designation: Submitted to: For Reference Approval Construction Submitted to: For Reference Approval Construction Submitted to: For Reference Approval Construction Submitted to: ForNo.: Reference Approval Construction System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: ystem Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: System Designation: Schedule No.: GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling •UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling GENERAL FEATURES • GENERAL FEATURES • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES GENERAL GENERAL FEATURES FEATURES • • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES • Allows P-Series outdoor units to operate to 0º F DB cooling. GENERAL FEATURES GENERAL FEATURES GENERAL FEATURES operationistobeperformedinoutdoorambienttemperaGENERAL FEATURES operationistobeperformedinoutdoorambienttempera•UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttempera• UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling operationistobeperformedinoutdoorambienttempera• UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB. turesdownto0ºFDB. • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB. • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling turesdownto0ºFDB. • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling ••UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling •operationistobeperformedinoutdoorambienttempera• UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB. • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling • • • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling •UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling •• Allows PUMY outdoor units to operate to 23º F DB cooling. turesdownto0ºFDB. • UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling UsedinMr.SlimP-Seriesoutdoorunitswheneveracooling operationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB. operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB. operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttemperaturesdownto0ºFDB. operationistobeperformedinoutdoorambienttemperaoperationistobeperformedinoutdoorambienttempera• Usedforprotectionofthefanwhenstrongwindsstrikethe turesdownto0ºFDB. • Usedforprotectionofthefanwhenstrongwindsstrikethe • turesdownto0ºFDB. Usedforprotectionofthefanwhenstrongwindsstrikethe turesdownto0ºFDB. ••Usedforprotectionofthefanwhenstrongwindsstrikethe turesdownto0ºFDB. turesdownto0ºFDB. turesdownto0ºFDB. turesdownto0ºFDB. turesdownto0ºFDB. Usedforprotectionofthefanwhenstrongwindsstrikethe turesdownto0ºFDB. turesdownto0ºFDB. turesdownto0ºFDB. turesdownto0ºFDB. Prevents wind from reversing outdoor fan rotation. •turesdownto0ºFDB. • •Usedforprotectionofthefanwhenstrongwindsstrikethe turesdownto0ºFDB. airoutlet. airoutlet. Usedforprotectionofthefanwhenstrongwindsstrikethe airoutlet. •airoutlet. Usedforprotectionofthefanwhenstrongwindsstrikethe •airoutlet. Usedforprotectionofthefanwhenstrongwindsstrikethe airoutlet. •Usedforprotectionofthefanwhenstrongwindsstrikethe Usedforprotectionofthefanwhenstrongwindsstrikethe airoutlet. • Usedforprotectionofthefanwhenstrongwindsstrikethe • Usedforprotectionofthefanwhenstrongwindsstrikethe • Usedforprotectionofthefanwhenstrongwindsstrikethe • • Usedforprotectionofthefanwhenstrongwindsstrikethe Usedforprotectionofthefanwhenstrongwindsstrikethe • airoutlet. • Usedforprotectionofthefanwhenstrongwindsstrikethe ••Usedforprotectionofthefanwhenstrongwindsstrikethe • Usedforprotectionofthefanwhenstrongwindsstrikethe • Usedforprotectionofthefanwhenstrongwindsstrikethe Usedforprotectionofthefanwhenstrongwindsstrikethe airoutlet. •• Durable, low maintenance construction. • Usedforprotectionofthefanwhenstrongwindsstrikethe Usedforprotectionofthefanwhenstrongwindsstrikethe • Designedtopreventreverserotationoftheoutdoorunitfan airoutlet. • Designedtopreventreverserotationoftheoutdoorunitfan • airoutlet. Designedtopreventreverserotationoftheoutdoorunitfan airoutlet. airoutlet. • airoutlet. airoutlet. airoutlet. airoutlet. •Designedtopreventreverserotationoftheoutdoorunitfan Designedtopreventreverserotationoftheoutdoorunitfan airoutlet. airoutlet. airoutlet. airoutlet. airoutlet. • Designedtopreventreverserotationoftheoutdoorunitfan airoutlet. whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller • Designedtopreventreverserotationoftheoutdoorunitfan whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller • •whenitenterslowspeedrotationmodewiththefancontroller Designedtopreventreverserotationoftheoutdoorunitfan Designedtopreventreverserotationoftheoutdoorunitfan whenitenterslowspeedrotationmodewiththefancontroller beingoperated. beingoperated. •Designedtopreventreverserotationoftheoutdoorunitfan whenitenterslowspeedrotationmodewiththefancontroller beingoperated. • Designedtopreventreverserotationoftheoutdoorunitfan beingoperated. •Designedtopreventreverserotationoftheoutdoorunitfan Designedtopreventreverserotationoftheoutdoorunitfan ••Designedtopreventreverserotationoftheoutdoorunitfan Designedtopreventreverserotationoftheoutdoorunitfan • • Designedtopreventreverserotationoftheoutdoorunitfan Designedtopreventreverserotationoftheoutdoorunitfan whenitenterslowspeedrotationmodewiththefancontroller beingoperated. • Designedtopreventreverserotationoftheoutdoorunitfan • • • Designedtopreventreverserotationoftheoutdoorunitfan •Designedtopreventreverserotationoftheoutdoorunitfan Designedtopreventreverserotationoftheoutdoorunitfan whenitenterslowspeedrotationmodewiththefancontroller beingoperated. • Designedtopreventreverserotationoftheoutdoorunitfan • Designedtopreventreverserotationoftheoutdoorunitfan whenitenterslowspeedrotationmodewiththefancontroller beingoperated. whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller beingoperated. whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller whenitenterslowspeedrotationmodewiththefancontroller beingoperated. whenitenterslowspeedrotationmodewiththefancontroller • Constructedfromzinc-coatedmildcarbonsteelforalongand whenitenterslowspeedrotationmodewiththefancontroller • Constructedfromzinc-coatedmildcarbonsteelforalongand beingoperated. • beingoperated. Constructedfromzinc-coatedmildcarbonsteelforalongand beingoperated. ••Constructedfromzinc-coatedmildcarbonsteelforalongand beingoperated. beingoperated. beingoperated. beingoperated. beingoperated. Constructedfromzinc-coatedmildcarbonsteelforalongand beingoperated. beingoperated. beingoperated. beingoperated. • Constructedfromzinc-coatedmildcarbonsteelforalongand beingoperated. reliableservicelife. beingoperated. reliableservicelife. • Constructedfromzinc-coatedmildcarbonsteelforalongand reliableservicelife. PLEASE NOTE •reliableservicelife. Constructedfromzinc-coatedmildcarbonsteelforalongand reliableservicelife. • Constructedfromzinc-coatedmildcarbonsteelforalongand reliableservicelife. •Constructedfromzinc-coatedmildcarbonsteelforalongand reliableservicelife. •reliableservicelife. Constructedfromzinc-coatedmildcarbonsteelforalongand •Constructedfromzinc-coatedmildcarbonsteelforalongand Constructedfromzinc-coatedmildcarbonsteelforalongand ••Constructedfromzinc-coatedmildcarbonsteelforalongand Constructedfromzinc-coatedmildcarbonsteelforalongand • • Constructedfromzinc-coatedmildcarbonsteelforalongand Constructedfromzinc-coatedmildcarbonsteelforalongand • Constructedfromzinc-coatedmildcarbonsteelforalongand • • • Constructedfromzinc-coatedmildcarbonsteelforalongand •Constructedfromzinc-coatedmildcarbonsteelforalongand Constructedfromzinc-coatedmildcarbonsteelforalongand reliableservicelife. • Constructedfromzinc-coatedmildcarbonsteelforalongand • Finishedwithanelectrostaticallyapplied,thermallyfused • Constructedfromzinc-coatedmildcarbonsteelforalongand • Finishedwithanelectrostaticallyapplied,thermallyfused reliableservicelife. • reliableservicelife. Finishedwithanelectrostaticallyapplied,thermallyfused reliableservicelife. • Finishedwithanelectrostaticallyapplied,thermallyfused reliableservicelife. reliableservicelife. reliableservicelife. WB-PA1 reliableservicelife. reliableservicelife. • Install outdoor units with the back surface facing wall side to • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA1 reliableservicelife. WB-PA1 reliableservicelife. WB-PA2 reliableservicelife. reliableservicelife. WB-PA1 • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA2 reliableservicelife. acrylicresincoatingforcorrosionprotection. WB-PA2 reliableservicelife. acrylicresincoatingforcorrosionprotection. WB-PA1 • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA2 acrylicresincoatingforcorrosionprotection. WB-PA2 WB-PA1 eliminate the effects of external wind. •acrylicresincoatingforcorrosionprotection. Finishedwithanelectrostaticallyapplied,thermallyfused acrylicresincoatingforcorrosionprotection. WB-PA1 WB-PA2 • Finishedwithanelectrostaticallyapplied,thermallyfused acrylicresincoatingforcorrosionprotection. WB-PA2 WB-PA1 • Finishedwithanelectrostaticallyapplied,thermallyfused acrylicresincoatingforcorrosionprotection. SPECIFICATIONS SPECIFICATIONS • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA2 SPECIFICATIONS WB-PA1 WB-PA1 • Finishedwithanelectrostaticallyapplied,thermallyfused • Finishedwithanelectrostaticallyapplied,thermallyfused •acrylicresincoatingforcorrosionprotection. • Finishedwithanelectrostaticallyapplied,thermallyfused Finishedwithanelectrostaticallyapplied,thermallyfused SPECIFICATIONS • Finishedwithanelectrostaticallyapplied,thermallyfused acrylicresincoatingforcorrosionprotection. WB-PA1 • Finishedwithanelectrostaticallyapplied,thermallyfused • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA2 • Finishedwithanelectrostaticallyapplied,thermallyfused SPECIFICATIONS • Finishedwithanelectrostaticallyapplied,thermallyfused • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA2 • • Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA1 WB-PA1 Finishedwithanelectrostaticallyapplied,thermallyfused WB-PA1 WB-PA1 WB-PA1 SPECIFICATIONS WB-PA2 acrylicresincoatingforcorrosionprotection. WB-PA1 WB-PA1 WB-PA2 WB-PA2 WB-PA1 acrylicresincoatingforcorrosionprotection. WB-PA2 SPECIFICATIONS WB-PA2 WB-PA2 WB-PA1 WB-PA1 acrylicresincoatingforcorrosionprotection. WB-PA1 acrylicresincoatingforcorrosionprotection. WB-PA2 WB-PA2 acrylicresincoatingforcorrosionprotection. acrylicresincoatingforcorrosionprotection. • Outdoor units should not be installed in an orientation or WB-PA1 acrylicresincoatingforcorrosionprotection. WB-PA1 PLEASE NOTE WB-PA2 WB-PA2 WB-PA1 WB-PA2 PLEASE NOTE acrylicresincoatingforcorrosionprotection. acrylicresincoatingforcorrosionprotection. WB-PA1 SPECIFICATIONS acrylicresincoatingforcorrosionprotection. WB-PA1 WB-PA2 PLEASE NOTE acrylicresincoatingforcorrosionprotection. WB-PA2 acrylicresincoatingforcorrosionprotection. WB-PA1 PLEASE NOTE acrylicresincoatingforcorrosionprotection. WB-PA2 / WB-PA3 acrylicresincoatingforcorrosionprotection. SPECIFICATIONS WB-PA1 PLEASE NOTE SPECIFICATIONS SPECIFICATIONS WB-PA1 PLEASE NOTE site where the wind blows directly at the back of the unit.SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS WB-PA1 PLEASE NOTE SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS WB-PA1 Color(Munsell) Ivory(3.0Y7.8/1.1) PLEASE NOTE SPECIFICATIONS SPECIFICATIONS Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) WB-PA1 Color(Munsell) Ivory(3.0Y7.8/1.1) PLEASE NOTE • Installthisunitwiththebacksurfacefacingwallsideto Installthisunitwiththebacksurfacefacingwallsideto WB-PA1 PLEASE NOTE Color(Munsell) Ivory(3.0Y7.8/1.1) • • Installthisunitwiththebacksurfacefacingwallsideto WB-PA1 NOTE • Installthisunitwiththebacksurfacefacingwallsideto WB-PA1 PLEASE NOTEnot be used where there is any obstacle Color(Munsell) Ivory(3.0Y7.8/1.1) WB-PA1 PLEASE NOTE WB-PA1 WB-PA1 PLEASE PLEASE NOTE NOTE WB-PA1 PLEASE NOTE •PLEASE Installthisunitwiththebacksurfacefacingwallsideto WB-PA1 WB-PA1 PLEASE NOTE Color(Munsell) Ivory(3.0Y7.8/1.1) PLEASE NOTE WB-PA1 PLEASE NOTE WB-PA1 PLEASE NOTE WB-PA1 PLEASE NOTE • Installthisunitwiththebacksurfacefacingwallsideto • Wind baffle should WB-PA1 PLEASE NOTE eliminatetheeffectsofexternalwind. WB-PA1 PLEASE NOTE Color(Munsell) Ivory(3.0Y7.8/1.1) eliminatetheeffectsofexternalwind. Acrylicresincoating SurfaceTreatment • Installthisunitwiththebacksurfacefacingwallsideto eliminatetheeffectsofexternalwind. Acrylicresincoating SurfaceTreatment Acrylicresincoating SurfaceTreatment eliminatetheeffectsofexternalwind. Color(Munsell) Ivory(3.0Y7.8/1.1) SurfaceTreatment Acrylicresincoating Exterior • •eliminatetheeffectsofexternalwind. Installthisunitwiththebacksurfacefacingwallsideto Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) Acrylicresincoating SurfaceTreatment Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) Exterior Installthisunitwiththebacksurfacefacingwallsideto eliminatetheeffectsofexternalwind. at either side or above the outdoor unit as the discharged Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) SurfaceTreatment Acrylicresincoating Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Color(Munsell) Ivory(3.0Y7.8/1.1) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) •Installthisunitwiththebacksurfacefacingwallsideto eliminatetheeffectsofexternalwind. Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Acrylicresincoating SurfaceTreatment •eliminatetheeffectsofexternalwind. Installthisunitwiththebacksurfacefacingwallsideto Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) •Installthisunitwiththebacksurfacefacingwallsideto Installthisunitwiththebacksurfacefacingwallsideto Exterior ••will Installthisunitwiththebacksurfacefacingwallsideto Color(Munsell) Ivory(3.0Y7.8/1.1) • • Installthisunitwiththebacksurfacefacingwallsideto Installthisunitwiththebacksurfacefacingwallsideto Color(Munsell) Ivory(3.0Y7.8/1.1) SPECIFICATIONS Acrylicresincoating SurfaceTreatment Alloyhot-dipzinccoatedcarbon Exterior • Installthisunitwiththebacksurfacefacingwallsideto • • Installthisunitwiththebacksurfacefacingwallsideto Alloyhot-dipzinccoatedcarbon • Installthisunitwiththebacksurfacefacingwallsideto •Installthisunitwiththebacksurfacefacingwallsideto Installthisunitwiththebacksurfacefacingwallsideto Alloyhot-dipzinccoatedcarbon eliminatetheeffectsofexternalwind. air be blocked. • Installthisunitwiththebacksurfacefacingwallsideto • Shouldnotbeinstalledinanorientationorsitewherethe • Installthisunitwiththebacksurfacefacingwallsideto Acrylicresincoating SurfaceTreatment Alloyhot-dipzinccoatedcarbon Exterior Material • Shouldnotbeinstalledinanorientationorsitewherethe eliminatetheeffectsofexternalwind. • eliminatetheeffectsofexternalwind. Shouldnotbeinstalledinanorientationorsitewherethe Material SurfaceTreatment Acrylicresincoating Alloyhot-dipzinccoatedcarbon eliminatetheeffectsofexternalwind. Material • Shouldnotbeinstalledinanorientationorsitewherethe eliminatetheeffectsofexternalwind. Acrylicresincoating SurfaceTreatment eliminatetheeffectsofexternalwind. Exterior Material eliminatetheeffectsofexternalwind. SurfaceTreatment Acrylicresincoating eliminatetheeffectsofexternalwind. eliminatetheeffectsofexternalwind. steelsheet Acrylicresincoating SurfaceTreatment Alloyhot-dipzinccoatedcarbon • Shouldnotbeinstalledinanorientationorsitewherethe SurfaceTreatment Acrylicresincoating SurfaceTreatment SurfaceTreatment Acrylicresincoating Acrylicresincoating steelsheet SurfaceTreatment Acrylicresincoating Exterior eliminatetheeffectsofexternalwind. Material steelsheet eliminatetheeffectsofexternalwind. Acrylicresincoating SurfaceTreatment SurfaceTreatment Acrylicresincoating Alloyhot-dipzinccoatedcarbon eliminatetheeffectsofexternalwind. Exterior eliminatetheeffectsofexternalwind. Acrylicresincoating SurfaceTreatment steelsheet • •Shouldnotbeinstalledinanorientationorsitewherethe Exterior Acrylicresincoating SurfaceTreatment eliminatetheeffectsofexternalwind. Acrylicresincoating SurfaceTreatment Exterior windblowsdirectlyatthebackoftheunit. eliminatetheeffectsofexternalwind. Material Exterior Exterior Acrylicresincoating SurfaceTreatment Exterior windblowsdirectlyatthebackoftheunit. WB-PA1 steelsheet Acrylicresincoating SurfaceTreatment Shouldnotbeinstalledinanorientationorsitewherethe windblowsdirectlyatthebackoftheunit. Alloyhot-dipzinccoatedcarbon Exterior Exterior Exterior Material Exterior Exterior Exterior steelsheet Exterior •windblowsdirectlyatthebackoftheunit. Shouldnotbeinstalledinanorientationorsitewherethe Exterior Alloyhot-dipzinccoatedcarbon windblowsdirectlyatthebackoftheunit. Material steelsheet Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon Shouldnotbeinstalledinanorientationorsitewherethe windblowsdirectlyatthebackoftheunit. Alloyhot-dipzinccoatedcarbon Material steelsheet Weight 7lb7.9oz •Shouldnotbeinstalledinanorientationorsitewherethe Shouldnotbeinstalledinanorientationorsitewherethe Alloyhot-dipzinccoatedcarbon windblowsdirectlyatthebackoftheunit. Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon Weight 7lb7.9oz Alloyhot-dipzinccoatedcarbon Material Weight 7lb7.9oz ••windblowsdirectlyatthebackoftheunit. Shouldnotbeinstalledinanorientationorsitewherethe Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon Material Alloyhot-dipzinccoatedcarbon steelsheet Weight 7lb7.9oz • Shouldnotbeinstalledinanorientationorsitewherethe • Shouldnotbeinstalledinanorientationorsitewherethe Material Alloyhot-dipzinccoatedcarbon • • Shouldnotbeinstalledinanorientationorsitewherethe Shouldnotbeinstalledinanorientationorsitewherethe Alloyhot-dipzinccoatedcarbon • Material Material Material Material Alloyhot-dipzinccoatedcarbon Material steelsheet Color Ivory Weight 7lb7.9oz • Shouldnotbeinstalledinanorientationorsitewherethe • Shouldnotbeinstalledinanorientationorsitewherethe Alloyhot-dipzinccoatedcarbon • Shouldnotbeinstalledinanorientationorsitewherethe Material Material Shouldnotbeinstalledinanorientationorsitewherethe steelsheet • • Shouldnotbeinstalledinanorientationorsitewherethe Material windblowsdirectlyatthebackoftheunit. steelsheet Material • Shouldnotbeinstalledinanorientationorsitewherethe Material steelsheet • Shouldnotbeusedwherethereisanyobstacleateither Weight 7lb7.9oz • Shouldnotbeinstalledinanorientationorsitewherethe steelsheet steelsheet steelsheet Material steelsheet • Shouldnotbeusedwherethereisanyobstacleateither windblowsdirectlyatthebackoftheunit. Material • windblowsdirectlyatthebackoftheunit. Shouldnotbeusedwherethereisanyobstacleateither steelsheet steelsheet Weight 7lb7.9oz steelsheet windblowsdirectlyatthebackoftheunit. • steelsheet steelsheet windblowsdirectlyatthebackoftheunit. steelsheet windblowsdirectlyatthebackoftheunit. windblowsdirectlyatthebackoftheunit. windblowsdirectlyatthebackoftheunit. windblowsdirectlyatthebackoftheunit. steelsheet •Shouldnotbeusedwherethereisanyobstacleateither Shouldnotbeusedwherethereisanyobstacleateither Weight 7lb7.9oz Washerfacedscrew(M4x10)x4 windblowsdirectlyatthebackoftheunit. Washerfacedscrew(M4x10)x4 windblowsdirectlyatthebackoftheunit. windblowsdirectlyatthebackoftheunit. Washerfacedscrew(M4x10)x4 windblowsdirectlyatthebackoftheunit. • windblowsdirectlyatthebackoftheunit. sideorabovetheoutdoorunitasthedischargedairwillbe Weight 7lb7.9ozPolyester Washerfacedscrew(M4x10)x4 windblowsdirectlyatthebackoftheunit. sideorabovetheoutdoorunitasthedischargedairwillbe •Shouldnotbeusedwherethereisanyobstacleateither Shouldnotbeusedwherethereisanyobstacleateither sideorabovetheoutdoorunitasthedischargedairwillbe Weight 7lb7.9oz Surface Treatment Powder Paint Washerfacedscrew(M4x10)x4 sideorabovetheoutdoorunitasthedischargedairwillbe Weight 7lb7.9oz Weight 7lb7.9oz <SUS410/Passivated> Weight 7lb7.9oz • Shouldnotbeusedwherethereisanyobstacleateither Washerfacedscrew(M4x10)x4 Weight 7lb7.9oz sideorabovetheoutdoorunitasthedischargedairwillbe Weight Weight 7lb7.9oz 7lb7.9oz <SUS410/Passivated> Weight 7lb7.9oz Exterior <SUS410/Passivated> Weight 7lb7.9oz Weight 7lb7.9oz Washerfacedscrew(M4x10)x4 Weight 7lb7.9oz <SUS410/Passivated> • Shouldnotbeusedwherethereisanyobstacleateither Shouldnotbeusedwherethereisanyobstacleateither sideorabovetheoutdoorunitasthedischargedairwillbe Weight 7lb7.9oz AccessoryxQty. Weight 7lb7.9oz blocked. AccessoryxQty. Weight 7lb7.9oz <SUS410/Passivated> blocked. Weight 7lb7.9oz •Shouldnotbeusedwherethereisanyobstacleateither sideorabovetheoutdoorunitasthedischargedairwillbe AccessoryxQty. blocked. Washerfacedscrew(M4x10)x4 AccessoryxQty. • Washerfacedscrew(M5x15)x4 blocked. <SUS410/Passivated> •Shouldnotbeusedwherethereisanyobstacleateither Shouldnotbeusedwherethereisanyobstacleateither Washerfacedscrew(M5x15)x4 MODEL REQUIRED PER OUTDOOR UNIT ••Shouldnotbeusedwherethereisanyobstacleateither Shouldnotbeusedwherethereisanyobstacleateither •sideorabovetheoutdoorunitasthedischargedairwillbe • Shouldnotbeusedwherethereisanyobstacleateither Shouldnotbeusedwherethereisanyobstacleateither AccessoryxQty. sideorabovetheoutdoorunitasthedischargedairwillbe Washerfacedscrew(M5x15)x4 Washerfacedscrew(M4x10)x4 blocked. <SUS410/Passivated> • Shouldnotbeusedwherethereisanyobstacleateither • Shouldnotbeusedwherethereisanyobstacleateither Washerfacedscrew(M5x15)x4 • Washerfacedscrew(M4x10)x4 <Material/SurfaceTreatment> Alloy hot-dip zinc coated carbon • Shouldnotbeusedwherethereisanyobstacleateither AccessoryxQty. • Shouldnotbeusedwherethereisanyobstacleateither <Material/SurfaceTreatment> blocked. Washerfacedscrew(M5x15)x4 Washerfacedscrew(M4x10)x4 • Shouldnotbeusedwherethereisanyobstacleateither <Material/SurfaceTreatment> • Shouldnotbeusedwherethereisanyobstacleateither Washerfacedscrew(M4x10)x4 <SUS410/Passivated> AccessoryxQty. Material Washerfacedscrew(M4x10)x4 Washerfacedscrew(M4x10)x4 sideorabovetheoutdoorunitasthedischargedairwillbe blocked. <Material/SurfaceTreatment> Washerfacedscrew(M4x10)x4 Washerfacedscrew(M4x10)x4 Washerfacedscrew(M4x10)x4 Washerfacedscrew(M4x10)x4 <Ironwire(SWCH18A)/Zincnickel Washerfacedscrew(M5x15)x4 sideorabovetheoutdoorunitasthedischargedairwillbe <Ironwire(SWCH18A)/Zincnickel Washerfacedscrew(M4x10)x4 <Material/SurfaceTreatment> sideorabovetheoutdoorunitasthedischargedairwillbe <Ironwire(SWCH18A)/Zincnickel Washerfacedscrew(M4x10)x4 <SUS410/Passivated> sideorabovetheoutdoorunitasthedischargedairwillbe Washerfacedscrew(M4x10)x4 AccessoryxQty. Washerfacedscrew(M5x15)x4 sideorabovetheoutdoorunitasthedischargedairwillbe Washerfacedscrew(M4x10)x4 sideorabovetheoutdoorunitasthedischargedairwillbe sideorabovetheoutdoorunitasthedischargedairwillbe blocked. <Ironwire(SWCH18A)/Zincnickel Washerfacedscrew(M4x10)x4 <SUS410/Passivated> steel sheet Washerfacedscrew(M4x10)x4 sideorabovetheoutdoorunitasthedischargedairwillbe sideorabovetheoutdoorunitasthedischargedairwillbe <Material/SurfaceTreatment> sideorabovetheoutdoorunitasthedischargedairwillbe <Ironwire(SWCH18A)/Zincnickel <SUS410/Passivated> sideorabovetheoutdoorunitasthedischargedairwillbe AccessoryxQty. sideorabovetheoutdoorunitasthedischargedairwillbe <SUS410/Passivated> Washerfacedscrew(M5x15)x4 blocked. <Material/SurfaceTreatment> <SUS410/Passivated> sideorabovetheoutdoorunitasthedischargedairwillbe • CanalsobemountedontheCITYMULTIS-Series3-ton <SUS410/Passivated> sideorabovetheoutdoorunitasthedischargedairwillbe <SUS410/Passivated> <SUS410/Passivated> <SUS410/Passivated> AccessoryxQty. plated> • CanalsobemountedontheCITYMULTIS-Series3-ton blocked. <Ironwire(SWCH18A)/Zincnickel plated> <SUS410/Passivated> <SUS410/Passivated> • blocked. CanalsobemountedontheCITYMULTIS-Series3-ton AccessoryxQty. Type and Quantity plated> <SUS410/Passivated> Washerfacedscrew(M5x15)x4 blocked. AccessoryxQty. <SUS410/Passivated> <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel • CanalsobemountedontheCITYMULTIS-Series3-ton <SUS410/Passivated> AccessoryxQty. blocked. plated> AccessoryxQty. blocked. AccessoryxQty. AccessoryxQty. <SUS410/Passivated> AccessoryxQty. Washerfacedscrew(M5x15)x4 blocked. blocked. blocked. <SUS410/Passivated> • • CanalsobemountedontheCITYMULTIS-Series3-ton AccessoryxQty. AccessoryxQty. plated> Washerfacedscrew(M5x15)x4 blocked. AccessoryxQty. <Material/SurfaceTreatment> Washerfacedscrew(M5x15)x4 AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel blocked. AccessoryxQty. Washerfacedscrew(M5x15)x4 blocked. Washerfacedscrew(M5x15)x4 blocked. Washerfacedscrew(M5x15)x4 Washerfacedscrew(M5x15)x4 AccessoryxQty. Washerfacedscrew(M5x15)x4 <Material/SurfaceTreatment> AccessoryxQty. blocked. plated> and4-tonunitchangingthedirectionoftheoutputairtoa blocked. Washerfacedscrew(M5x15)x4 Washerfacedscrew(M5x15)x4 <Material/SurfaceTreatment> UNIT MODEL and4-tonunitchangingthedirectionoftheoutputairtoa <Ironwire(SWCH18A)/Zincnickel •CanalsobemountedontheCITYMULTIS-Series3-ton CanalsobemountedontheCITYMULTIS-Series3-ton <Material/SurfaceTreatment> Washerfacedscrew(M5x15)x4 plated> and4-tonunitchangingthedirectionoftheoutputairtoa Weight 7Washerfacedscrew(M5x15)x4 lb Washerfacedscrew(M5x15)x4 7.9 oz Washerfacedscrew(M5x15)x4 <Material/SurfaceTreatment> <Material/SurfaceTreatment> <Material/SurfaceTreatment> <Material/SurfaceTreatment> Washerfacedscrew(M5x15)x4 <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel •and4-tonunitchangingthedirectionoftheoutputairtoa CanalsobemountedontheCITYMULTIS-Series3-ton <Material/SurfaceTreatment> and4-tonunitchangingthedirectionoftheoutputairtoa <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> plated> <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel • CanalsobemountedontheCITYMULTIS-Series3-ton and4-tonunitchangingthedirectionoftheoutputairtoa WB-PA1 WB-PA2 WB-PA3 <Ironwire(SWCH18A)/Zincnickel plated> 45ºangle. <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel 45ºangle. • CanalsobemountedontheCITYMULTIS-Series3-ton and4-tonunitchangingthedirectionoftheoutputairtoa <Ironwire(SWCH18A)/Zincnickel plated> 45ºangle. <Ironwire(SWCH18A)/Zincnickel • CanalsobemountedontheCITYMULTIS-Series3-ton 45ºangle. plated> • CanalsobemountedontheCITYMULTIS-Series3-ton plated> • CanalsobemountedontheCITYMULTIS-Series3-ton plated> •and4-tonunitchangingthedirectionoftheoutputairtoa • CanalsobemountedontheCITYMULTIS-Series3-ton CanalsobemountedontheCITYMULTIS-Series3-ton • CanalsobemountedontheCITYMULTIS-Series3-ton and4-tonunitchangingthedirectionoftheoutputairtoa plated> plated> plated> 45ºangle. plated> • CanalsobemountedontheCITYMULTIS-Series3-ton • CanalsobemountedontheCITYMULTIS-Series3-ton plated> plated> • CanalsobemountedontheCITYMULTIS-Series3-ton CanalsobemountedontheCITYMULTIS-Series3-ton plated> • • CanalsobemountedontheCITYMULTIS-Series3-ton plated> 45ºangle. plated> • CanalsobemountedontheCITYMULTIS-Series3-ton • CanalsobemountedontheCITYMULTIS-Series3-ton plated> plated> and4-tonunitchangingthedirectionoftheoutputairtoa 45ºangle. WB-PA2 and4-tonunitchangingthedirectionoftheoutputairtoa WB-PA2 and4-tonunitchangingthedirectionoftheoutputairtoa WB-PA2 and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa 45ºangle. PUY/Z-A12NHA4 1 WB-PA2 and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa WB-PA2 and4-tonunitchangingthedirectionoftheoutputairtoa 45ºangle. and4-tonunitchangingthedirectionoftheoutputairtoa and4-tonunitchangingthedirectionoftheoutputairtoa 45ºangle. WB-PA2 45ºangle. WB-PA2 WB-PA2 45ºangle. 45ºangle. 45ºangle. 45ºangle. 45ºangle. 45ºangle. 45ºangle. 45ºangle. WB-PA2 Color(Munsell) Ivory(3.0Y7.8/1.1) 45ºangle. 45ºangle. Color(Munsell) Ivory(3.0Y7.8/1.1) 45ºangle. 45ºangle. Color(Munsell) Ivory(3.0Y7.8/1.1) WB-PA2 Color(Munsell) Ivory(3.0Y7.8/1.1) PUY/Z-A18NHA4 1 WB-PA2 Color(Munsell) Ivory(3.0Y7.8/1.1) WB-PA2 WB-PA2 Color(Munsell) Ivory(3.0Y7.8/1.1) WB-PA2 WB-PA2 WB-PA2 WB-PA2 WB-PA2 WB-PA2 Color(Munsell) Ivory(3.0Y7.8/1.1) Color Ivory WB-PA2 WB-PA2 WB-PA2 WB-PA2 WB-PA2 Color(Munsell) Ivory(3.0Y7.8/1.1) SurfaceTreatment Acrylicresincoating SurfaceTreatment Acrylicresincoating SurfaceTreatment Acrylicresincoating Color(Munsell) Ivory(3.0Y7.8/1.1) SurfaceTreatment Acrylicresincoating PUY/Z-A24NHA4 1 Color(Munsell) Ivory(3.0Y7.8/1.1) Exterior SurfaceTreatment Acrylicresincoating Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Color(Munsell) Ivory(3.0Y7.8/1.1) Ivory(3.0Y7.8/1.1) Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) SurfaceTreatment Acrylicresincoating Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Exterior Color(Munsell) Ivory(3.0Y7.8/1.1) SurfaceTreatment Acrylicresincoating Surface Treatment Acrylic resin coating Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Color(Munsell) Ivory(3.0Y7.8/1.1) Exterior SurfaceTreatment Acrylicresincoating Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT ExteriorExterior Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT SurfaceTreatment Acrylicresincoating Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT Exterior Material PUY/Z-A30NHA4 1UNIT SurfaceTreatment Acrylicresincoating Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT Material SurfaceTreatment Acrylicresincoating Material SurfaceTreatment Acrylicresincoating steelsheet Exterior SurfaceTreatment Acrylicresincoating Material Alloyhot-dipzinccoatedcarbon SurfaceTreatment Acrylicresincoating MODEL REQUIRED PER OUTDOOR SurfaceTreatment SurfaceTreatment Acrylicresincoating Acrylicresincoating steelsheet SurfaceTreatment Acrylicresincoating steelsheet Exterior SurfaceTreatment Acrylicresincoating SurfaceTreatment Acrylicresincoating Alloyhot-dipzinccoatedcarbon Material Alloy hot-dip zinc coated carbon MODEL REQUIRED PER OUTDOOR UNIT SurfaceTreatment Acrylicresincoating steelsheet Exterior SurfaceTreatment Acrylicresincoating SurfaceTreatment Acrylicresincoating Exterior Exterior SurfaceTreatment Acrylicresincoating Exterior steelsheet SurfaceTreatment Acrylicresincoating Exterior Material Exterior Alloyhot-dipzinccoatedcarbon MODEL PER OUTDOOR UNIT Exterior Exterior Exterior Material Material Exterior Exterior steelsheet Type and Quantity Exterior Exterior Type and Quantity Alloyhot-dipzinccoatedcarbon MODELREQUIRED REQUIRED PER OUTDOOR UNIT Exterior steelsheet steelAlloyhot-dipzinccoatedcarbon sheet Type and Quantity Material Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT Type and Quantity PUY/Z-A36NHA4 1 Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT Type and Quantity steelsheet Alloyhot-dipzinccoatedcarbon Material MODEL REQUIRED PER OUTDOOR UNIT Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon MODEL REQUIRED PER OUTDOOR UNIT Alloyhot-dipzinccoatedcarbon MODEL MODEL REQUIRED REQUIRED PER PER OUTDOOR OUTDOOR UNIT UNIT MODEL REQUIRED PER OUTDOOR UNIT UNIT MODEL Weight 8lb3.7oz Material Alloyhot-dipzinccoatedcarbon Alloyhot-dipzinccoatedcarbon Type and Quantity MODEL REQUIRED PER OUTDOOR UNIT MODEL REQUIRED PER OUTDOOR UNIT UNIT MODEL Alloyhot-dipzinccoatedcarbon steelsheet Weight 8lb3.7oz MODEL REQUIRED PER OUTDOOR UNIT Weight Alloyhot-dipzinccoatedcarbon UNIT MODEL Material MODEL REQUIRED PER OUTDOOR UNIT Alloyhot-dipzinccoatedcarbon 8lb3.7oz MODEL REQUIRED PER OUTDOOR UNIT Type and Quantity Material Alloyhot-dipzinccoatedcarbon steelsheet UNIT MODEL MODEL REQUIRED PER OUTDOOR UNIT Material Alloyhot-dipzinccoatedcarbon Weight 8lb3.7oz Material MODEL REQUIRED PER OUTDOOR UNIT Material Material Material steelsheet UNIT MODEL Material Material steelsheet Weight 8lb3.7oz steelsheet Material steelsheet Type Quantity steelsheet steelsheet Material steelsheet WB-PA1 WB-PA2 Material steelsheet steelsheet UNIT MODEL Material WB-PA1 WB-PA2 Weight 8lb3.7oz WB-PA1 WB-PA2 steelsheet steelsheet Typeand and Quantity UNIT MODEL Weight Weight Material 8lb3.7oz steelsheet 8steelsheet lb steelsheet 4.4 oz WB-PA1 WB-PA2 PUY/Z-A42NHA4 2and Type and Quantity WB-PA1 WB-PA2 Type and Quantity UNIT MODEL Weight 8lb3.7oz Washerfacedscrew(M5x15)x4 Type and Quantity Type Quantity Type and Quantity Washerfacedscrew(M5x15)x4 Type and Quantity WB-PA1 WB-PA2 Washerfacedscrew(M5x15)x4 Type and Quantity Type and Quantity UNIT MODEL Type and Quantity Weight 8lb3.7oz Washerfacedscrew(M5x15)x4 WB-PA1 WB-PA2 Type and Quantity AccessoryxQty. Type and Quantity UNIT MODEL AccessoryxQty. Type and Quantity Weight 8lb3.7oz Type and Quantity Washerfacedscrew(M5x15)x4 AccessoryxQty. UNIT MODEL Weight 8lb3.7oz AccessoryxQty. WB-PA1 WB-PA2 UNIT MODEL Weight 8lb3.7oz <Ironwire(SWCH18A)/Zincnickel UNIT MODEL Weight 8lb3.7oz PUY/Z-A12NHA4 1 0 UNIT MODEL Washerfacedscrew(M5x15)x4 UNIT MODEL Weight 8lb3.7oz Weight Weight 8lb3.7oz 8lb3.7oz <Ironwire(SWCH18A)/Zincnickel Weight 8lb3.7oz PUY/Z-A12NHA4 1 0 AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel UNIT MODEL UNIT MODEL PUY/Z-A12NHA4 1 0 Weight 8lb3.7oz Weight 8lb3.7oz Washerfacedscrew(M5x15)x4 WB-PA1 WB-PA2 UNIT MODEL Weight 8lb3.7oz <Ironwire(SWCH18A)/Zincnickel UNIT MODEL Weight 8lb3.7oz PUY/Z-A12NHA4 1 0 <Material/SurfaceTreatment> UNIT MODEL Weight 8lb3.7oz PUY/Z-A42NHA5 2 AccessoryxQty. WB-PA1 WB-PA2 UNIT MODEL <Material/SurfaceTreatment> Weight 8lb3.7oz UNIT MODEL <Ironwire(SWCH18A)/Zincnickel Weight 8lb3.7oz PUY/Z-A12NHA4 1WB-PA1 0WB-PA2 WB-PA1 WB-PA2 Washerfacedscrew(M5x15)x4 AccessoryxQty. <Material/SurfaceTreatment> WB-PA1 WB-PA2<Material/SurfaceTreatment> plated> WB-PA1 WB-PA2 WB-PA1 WB-PA1 WB-PA2 WB-PA2 <Ironwire(SWCH18A)/Zincnickel WB-PA1 WB-PA2 plated> PUY/Z-A12NHA4 1 WB-PA2 00 <Material/SurfaceTreatment> plated> Washerfacedscrew(M5x15)x4 WB-PA1 AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel WB-PA1 WB-PA2 PUY/Z-A12NHA4 1 plated> WB-PA1 WB-PA2 WB-PA1 WB-PA2 Washerfacedscrew(M5x15)x4 <Material/SurfaceTreatment> WB-PA1 WB-PA2 WB-PA1 WB-PA2 plated> Washerfacedscrew(M5x15)x4 AccessoryxQty. Washerfacedscrew(M5x15)x4 <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> Washerfacedscrew(M5x15)x4 PUY/Z-A12NHA4 11 00 Washerfacedscrew(M5x15)x4 Washerfacedscrew(M5x15)x4 Washerfacedscrew(M5x15)x4 Washerfacedscrew(M5x15)x4 AccessoryxQty. PUY/Z-A18NHA4 plated> Washerfacedscrew(M5x15)x4 PUY/Z-A18NHA4 Washerfacedscrew(M5x15)x4 AccessoryxQty. Washerfacedscrew(M5x15)x4 <Ironwire(SWCH18A)/Zincnickel PUY/Z-A18NHA4 1 11 11 0 00 00 WB-PA3 PUY/Z-A12NHA4 AccessoryxQty. Washerfacedscrew(M5x15)x4 <Material/SurfaceTreatment> plated> Washerfacedscrew(M5x15)x4 AccessoryxQty. AccessoryxQty. PUY/Z-A18NHA4 AccessoryxQty. AccessoryxQty. Washerfacedscrew(M5x15)x4 AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel PUZ-HA30NHA4 2 Washerfacedscrew(M5x15)x4 PUY/Z-A12NHA4 1 0 AccessoryxQty. AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel PUY/Z-A18NHA4 AccessoryxQty. <Material/SurfaceTreatment> PUY/Z-A12NHA4 1 0 <Ironwire(SWCH18A)/Zincnickel AccessoryxQty. plated> AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel PUY/Z-A12NHA4 1 0 <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel AccessoryxQty. <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> PUY/Z-A12NHA4 1 0 PUY/Z-A12NHA4 PUY/Z-A12NHA4 1 1 0 0 AccessoryxQty. PUY/Z-A12NHA4 1 0 PUY/Z-A18NHA4 1 0 <Ironwire(SWCH18A)/Zincnickel <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> PUY/Z-A12NHA4 1 0 PUY/Z-A12NHA4 1 0 <Ironwire(SWCH18A)/Zincnickel plated> PUY/Z-A12NHA4 1 0 <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel PUY/Z-A18NHA4 1 1 1 1 10 0 0 0 0 0 <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> PUY/Z-A12NHA4 PUY/Z-A12NHA4 <Material/SurfaceTreatment> <Material/SurfaceTreatment> <Material/SurfaceTreatment> <Ironwire(SWCH18A)/Zincnickel <Material/SurfaceTreatment> plated> <Ironwire(SWCH18A)/Zincnickel PUY/Z-A12NHA4 PUY/Z-A12NHA4 <Material/SurfaceTreatment> <Material/SurfaceTreatment> plated> <Material/SurfaceTreatment> plated> <Material/SurfaceTreatment> PUY/Z-A18NHA4 1 <Material/SurfaceTreatment> plated> plated> plated> plated> PUY/Z-A24NHA4 0 1 <Material/SurfaceTreatment> plated> <Material/SurfaceTreatment> Color Ivory PUY/Z-A24NHA4 0 1 plated> plated> PUY/Z-A24NHA4 0 1 plated> PUY/Z-A18NHA4 1 0 plated> plated> PUY/Z-A24NHA4 0 1 PUZ-HA36NHA4 plated> PUY/Z-A18NHA4 plated> PUY/Z-A24NHA4 10110210 PUY/Z-A18NHA4 PUY/Z-A18NHA4 PUY/Z-A18NHA4 PUY/Z-A18NHA4 00 00 PUY/Z-A18NHA4 PUY/Z-A18NHA4 PUY/Z-A24NHA4 PUY/Z-A18NHA4 1 01010111 0 PUY/Z-A18NHA4 PUY/Z-A18NHA4 PUY/Z-A24NHA4 1100 0 0 0 0 PUY/Z-A18NHA4 1 1 11 1 PUY/Z-A18NHA4 PUY/Z-A18NHA4 PUY/Z-A18NHA4 PUY/Z-A24NHA4 00 PUY/Z-A30NHA4 Surface Treatment Acrylic resin coating PUY/Z-A30NHA4 00 00 11 11 1 20 PUY/Z-A30NHA4 0 1 PUY/Z-A24NHA4 PUY/Z-A30NHA4 PUMY-P36NHMU PUY/Z-A24NHA4 1 PUY/Z-A30NHA4 Exterior PUY/Z-A24NHA4 000 00 1 10101 1 PUY/Z-A24NHA4 PUY/Z-A24NHA4 11 1 PUY/Z-A24NHA4 PUY/Z-A24NHA4 PUY/Z-A24NHA4 PUY/Z-A30NHA4 PUY/Z-A24NHA4 0 PUY/Z-A24NHA4 PUY/Z-A24NHA4 PUY/Z-A30NHA4 1011 1 1 1 1 PUY/Z-A24NHA4 PUY/Z-A24NHA4 PUY/Z-A24NHA4 PUY/Z-A24NHA4 PUY/Z-A30NHA4 0 0 0 0 01011011 0 Alloy hot-dip zinc coated carbon PUY/Z-A36NHA4 PUY/Z-A36NHA4 PUY/Z-A36NHA4 0 00 00 PUY/Z-A30NHA4 1020 PUY/Z-A36NHA4 PUMY-P48NHMU PUY/Z-A30NHA4 Material PUY/Z-A36NHA4 1 PUY/Z-A30NHA4 0 1 PUY/Z-A30NHA4 PUY/Z-A30NHA4 0 PUY/Z-A30NHA4 0111111 1 1 1 11 11 steel sheet PUY/Z-A30NHA4 PUY/Z-A30NHA4 PUY/Z-A36NHA4 000000 1 PUY/Z-A30NHA4 0 PUY/Z-A30NHA4 PUY/Z-A30NHA4 PUY/Z-A36NHA4 PUY/Z-A30NHA4 0 0 01 0 PUY/Z-A30NHA4 PUY/Z-A30NHA4 PUY/Z-A30NHA4 1 PUY/Z-A36NHA4 0 PUY/Z-A42NHA4 0 2 PUY/Z-A42NHA4 PUY/Z-A42NHA4 0 0 0000 2 2 2211 0 PUY/Z-A36NHA4 PUY/Z-A42NHA4 PUMY-P60NKMU PUY/Z-A36NHA4 121 PUY/Z-A42NHA4 PUY/Z-A36NHA4 PUY/Z-A36NHA4 0 PUY/Z-A36NHA4 0 1 PUY/Z-A36NHA4 PUY/Z-A36NHA4 0 0 1 1 PUY/Z-A36NHA4 0 1 PUY/Z-A42NHA4 0 2 Weight 8 lb 8 oz PUY/Z-A36NHA4 0 1 PUY/Z-A36NHA4 0 1 PUY/Z-A36NHA4 PUY/Z-A42NHA4 2 1111 1 PUY/Z-A36NHA4 PUY/Z-A36NHA4 PUY/Z-A36NHA4 PUY/Z-A36NHA4 PUY/Z-A42NHA4 0 0 0 0 02022022 0 PUZ-HA30NHA2 PUZ-HA30NHA2 PUZ-HA30NHA2 0 00 00 PUY/Z-A42NHA4 20 0 PUZ-HA30NHA2 PUY/Z-A42NHA4 2 PUZ-HA30NHA2 2 PUY/Z-A42NHA4 0 2 PUY/Z-A42NHA4 2 PUY/Z-A42NHA4 0 2 PUY/Z-A42NHA4 0222222 2 2 2 2 PUY/Z-A42NHA4 PUY/Z-A42NHA4 PUZ-HA30NHA2 00 00 2 PUY/Z-A42NHA4 0 PUY/Z-A42NHA4 PUY/Z-A42NHA4 PUZ-HA30NHA2 PUY/Z-A42NHA4 PUY/Z-A42NHA4 PUY/Z-A42NHA4 PUY/Z-A42NHA4 2 PUZ-HA30NHA2 0 0 0 0 02022022 0 PUZ-HA36NHA2 PUZ-HA36NHA2 PUZ-HA36NHA2 0 00 00 PUZ-HA30NHA2 20 PUZ-HA36NHA2 PUZ-HA30NHA2 PUZ-HA36NHA2 2 PUZ-HA30NHA2 0 2 PUZ-HA30NHA2 0 PUZ-HA30NHA2 0 22 22 PUZ-HA30NHA2 PUZ-HA30NHA2 0 0 2 2 PUZ-HA30NHA2 0 PUZ-HA36NHA2 0 2 PUZ-HA30NHA2 0 PUZ-HA30NHA2 0 2 PUZ-HA30NHA2 PUZ-HA36NHA2 222 2 2 2 2 PUZ-HA30NHA2 PUZ-HA30NHA2 PUZ-HA30NHA2 PUZ-HA30NHA2 PUZ-HA36NHA2 0 0 0 0 0 0 02 0 PUZ-HA36NHA2 2 PUZ-HA36NHA2 PUZ-HA36NHA2 0 0 00 2 200202 PUZ-HA36NHA2 PUZ-HA36NHA2 022 2 PUZ-HA36NHA2 22 22 PUZ-HA36NHA2 PUZ-HA36NHA2 PUZ-HA36NHA2 0 PUZ-HA36NHA2 PUZ-HA36NHA2 PUZ-HA36NHA2 PUZ-HA36NHA2 0000 0 PUZ-HA36NHA2 22 2 PUZ-HA36NHA2 Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: Notes: 2012 MITSUBISHI ELECTRIC & ELECTRONICS, ELECTRONICS, INC. 2012 MITSUBISHI ELECTRIC INC. 012 MITSUBISHI ELECTRIC && ELECTRONICS, INC. © MITSUBISHI ELECTRIC & INC. ©2012 2012 MITSUBISHI ELECTRIC &ELECTRONICS, ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. ©© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. ©2012 2012 MITSUBISHI ELECTRIC &ELECTRONICS, ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. © MITSUBISHI ELECTRIC & INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. © © 2012 2012 MITSUBISHI MITSUBISHI ELECTRIC ELECTRIC & & ELECTRONICS, ELECTRONICS, INC. INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. 012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. ©©2012 MITSUBISHI ELECTRIC &&ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC && ELECTRONICS, INC. 2012 MITSUBISHI ELECTRIC ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC ELECTRONICS, INC. © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc. Page 26 of 36 DIMENSIONS: WB-PA1 DimenSiOnS: Wb-Pa1 © 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC. Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc. Page 27 of 36 SECTION 5 WIRING INFORMATION Page 28 of 36 4 WIRING DIAGRAM SLZ-KA09NA.TH SLZ-KA12NA.TH SLZ-KA15NA.TH TB4 S1 S2 S3 GRILLE MF 1 3 ORN C1 P.B RED 5 1 3 5 7 9 1 WHT (FAN) FAN 3 RED 1 (D·HEATER) CNC 3 BLU 1 (D·U·M) CNP X1 ORN BLU 5 7 6 3 2 1 RED BLU MV 20 RED ORN YLW WHT BLU TO OUTDOOR UNIT M 1~ M 1~ RED WHT MV 5 DP YLW YLW 5 MV 10 5 RED RED MV RED RED BLK YLW BRN WHT BLU H2 3 RED 1 (POWER BOARD) CNDK FUSE 3 ORN (POWER) CND 1 I.B 1 3 3 BLU (CONTROL) CN3C DC13.1V 1 X7 X6 X5 X4 WHT (POWER BOARD) CN2D SWE ON OFF LED3 12345 CN32 <Fig: + 1> MODELS 1 SW2 SLZKA09NA ON OFF SLZKA12NA ON OFF SLZKA15NA ON OFF See Fig:+ 1 12345 3 CN24 2 2 1 CN51 5 RED CN105 1 5 1 CN41 1 4 GRN (VANE) CN6V 6 1 LED2 CN2S (WHT) BLK WHT 2 LED1 CN30 1 WHT (DRAIN) CN31 CN90 9 3 1 BLK RED (2 PHASE) (INTAKE) CN29 CN20 2 1 2 1 1 3 1 BLU WHT (LIQUID) (REMOCON) CN22 CN21 2 1 5 2 1 5 t° t° t° t° RFI 12345 1 2 BLU BLU ON OFF CN2L RED ORN YLW WHT BLU SW2 CNSK (RED) DS TH5 TH1 TH2 2 TB15 1 2 R.B TB6 1 2 12345 The black square (Ŷ) indicates a switch position. [LEGEND] SYMBOL P.B I.B CN2L CN24 CN30 CN32 CN41 CN51 CN105 FUSE LED1 LED2 LED3 SW2 SWE X1 X4 X5 X6 X7 NAME INDOOR POWER BOARD INDOOR CONTROLLER BOARD CONNECTOR (LOSSNAY) CONNECTOR (BACK-UP HEATING) CONNECTOR (LLC) CONNECTOR (REMOTE SWITCH) CONNECTOR (HA TERMINAL-A) CENTRALLY CONTROL CONNECTOR (RADIO FREQUENCY INTERFACE) FUSE (T6.3AL250V) POWER SUPPLY (I.B) POWER SUPPLY (I.B) TRANSMISSION (INDOOR-OUTDOOR) SWITCH (CAPACITY CODE) SWITCH (EMERGENCY OPERATION) DRAIN PUMP/DEW PREVENTION HEATER RELAY (FAN MOTOR LL) RELAY (FAN MOTOR Lo) RELAY (FAN MOTOR Hi) RELAY (FAN MOTOR Me) SYMBOL C1 DP DS RFI NAME CAPACITOR (FAN MOTOR) DRAIN PUMP DRAIN SENSOR RADIO FREQUENCY INTERFACE FOR RF THERMOSTAT H2 DEW PREVENTION HEATER FAN MOTOR (WITH THERMAL FUSE) MF VANE MOTOR MV TB4 TERMINAL BLOCK (INDOOR/OUTDOOR CONNECTING LINE) TB15 TERMINAL BLOCK (REMOTE CONTROLLER TRANSMISSION LINE) TH1 ROOM TEMP. THERMISTOR (32°F / 15kȍ, 77°F / 5.4kȍ DETECT) TH2 PIPE TEMP. THERMISTOR/LIQUID (32°F / 15kȍ, 77°F / 5.4kȍ DETECT) TH5 COND. / EVA. TEMP. THERMISTOR (32°F / 15kȍ, 77°F / 5.4kȍ DETECT) OPTION PART WIRED REMOTE CONTROLLER BOARD R.B TERMINAL BLOCK (REMOTE CONTROLLER TB6 TRANSMISSION LINE) NOTES: 1. Since the outdoor side electric wiring may change be sure to check the outdoor unit electric wiring for servicing. 2. Indoor and outdoor connecting wires are made with poIarities, make wiring matching terminal numbers (S1, S2, S3). 3. Use copper supply wires. : Connector, : Terminal (block). 4. SymboIs used in wiring diagram above are, +For details on how to operate self-diagnosis refer to the technical manuals etc. 9 Page 29 of 36 6 WIRING DIAGRAM MXZ-2B20NA MXZ-2B20NA - 1 12 Page 30 of 36 WIRING DIAGRAM 7 PUZ-A18NHA4 [LEGEND] SYMBOL TB1 MC MF1 21S4 63H TH3 TH6 TH7 TH8 TH32 LEV-A ACL CY1,CY2 P.B. TABR/S TABU/V/W PUZ-A18NHA4-BS NAME SYMBOL Terminal Block<Power Supply, Indoor/Outdoor> PFC Motor for Compressor IPM Fan Motor CB1~CB3 N.F. Solenoid Valve (Four-Way Valve) High Pressure Switch LI/LO Thermistor<Outdoor Pipe> NI/NO EI,E2,E3 Thermistor<Outdoor 2-Phase Pipe> 52C Thermistor<Outdoor> Thermistor<Heatsink> C.B. Thermistor<Shell> SW1 Electronic Expansion Valve Reactor SW4 Capacitor SW5 Power Circuit Board SW6 SW7 Connection Terminal<L1/L2-Phase> SW8 Connection Terminal<U/V/W-Phase> PUY-A12/18NHA4 NAME Converter Power Module Main Smoothing Capacitor Noise Filter Circuit Board Connection Terminal<L1-Phase> Connection Terminal<L2-Phase> Connection Terminal<Ground> 52C Relay Controller Circuit Board Switch<Forced Defrost, Defect History Record Reset, Refrigerant Address> Switch<Test Operation> Switch<Function Switch> Switch<Model Select> Switch<Function Setup> Switch<Function Setup> PUY-A12/18NHA4-BS SYMBOL SW9 LED1,LED2 F1~F4 SWP CN31 SS CNM CNMNT NAME Switch LED<Operation Inspection Indicators> Fuse<T6.3AL250V> Switch<Pump Down> Connector<Emergency Operation> Connector<Connection for Option> Connector<A-Control Service Inspection Kit> Connector <Connected to Optional M-NET Adapter Board> CNVMNT Connector <Connected to Optional M-NET Adapter Board> Connector <Connected for Option (Contact Input)> CNDM Connector <Connected for Option (Signal output)> CN51 X51, X52, X55 Relay When M-NET adapter is connected LEV-A t° 1 TRANS 3 1 14 CNM (WHT) 63H (YLW) CN52C (RED) CN4 (WHT) 7 5 1 2 2 X51 4 X55 3 X52 F1 2 1 3 1 SV2 3 1 SS 21S4 3 (GRN) F4 (BLU) 21S4 RED RED WHT WHT M-NET ADAPTER 2 1 3 3 A B S 1 TB7 5 M-NET 1 (WHT) PUZ only RED WHT ACL LO MS MC 3~ U 2 CN4 1 (WHT) 2 2 CN52C (BLK) CN5 1 (RED) 2 TABU 1 CN3 1 (WHT) 2 TABV TABW 3 t° TH8 1 CNAC2 (RED) TABR RED TABS WHT 2 E3 IPM 5 CN2 (WHT) CB2 CB3 1 NAME Terminal Block<M-net connection> Connector<Transmission> Connector<Power Supply> Connector<M-NET communication> Switch<Status of communication> Switch<Address setting : 1s digit> Switch<Address setting : 10s digit> LED<Power Supply : DC5V> LED<Connection to Outdoor Unit> LED<Transmission : Sending> LED<Transmission : Receiving> LED<Power Supply : DC12V> 2 2 7 SYMBOL TB7 CN5 CND CN2M SW1 SW11 SW12 LED1 LED2 LED3 LED4 LED5 E2 CB1 2 CN5 (RED) PFC M-NET ADAPTER 1 52C BLK WHT P. B. N. F. NO RED W V CND (WHT) 3 1 CN31 1 2 5 F3 CNAC (WHT) 1 SW6 3 2 F2 1 1 CNVMNT CNMNT (WHT) (WHT) 1 CNDC (PNK) 3 6 SW1 LED2 CN2 (WHT) LEV-A (WHT) LED4 CNDM (WHT) 1 1 2 TH3 (WHT) SW12 LED3 +1 CN51 (WHT) 4 SW4 SWP SW8 SW5 1 LED1 1 2 TH32 TH7/6 (BLK) (RED) 3 CNS (WHT) LED2 t° 1 1 5 SW11 SW1 1 LED5 CN2M (WHT) LED1 t° 5 +1 CNF1 7 (WHT) 1 MF1 MS 3~ t° 3 SW9 SW7 C. B. 5 M TH32 TH7 TH6 TH3 CN5 (WHT) 63H 1 +1 MODEL SELECT The black square (■) indicates a switch position. 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 +2. SW5-1 to 4 : Function switch ON OFF ON OFF CNAC1 (WHT) 1 2 3 4 5 6 U 1 2 3 4 5 6 1 2 3 4 5 6 L1 L2 GR POWER SUPPLY 208 / 230V 60Hz OCH481A LI BRN ON PUY-A18NHA4 OFF ON OFF ORN ON PUY-A12NHA4 OFF 1 2 3 4 5 6 7 8 YLW ON OFF +2 U EI NI CY1 CY2 GRN PUZ-A18NHA4 3 SW5-5.6 BLU SW6 RED MODEL S1 S2 S3 TB1 INDOOR UNIT +Use copper supply wires. 16 Page 31 of 36 7 WIRING DIAGRAM PKA-A12HA4 PKA-A18HA4 [LEGEND] Symbol I.B CN2L CN30 CN32 CN41 CN51 CN90 CN105 CN152 FUSE LED1 LED2 LED3 SW1 SW2 SWE RFI Name Indoor controller board Connector (LOSSNAY) Connector (LLC) Connector ( Remote switch) Connector (HA terminal-A) Connector (Centrally control) Connector (Remote operation adapter) Connector (Radio frequency interface) Connector (Back-up heating) FUSE(T3.15AL250V) Power supply (I.B) Power supply (R.B) Transmission (Indoor-outdoor) Switch (Model selection) +See Table 1 Switch (Capacity code) +See Table 2 Connector (Emergency operation) Radio frequency interface for RF thermostat Symbol M MS S.W SWE2 TB2 TB4 TB5 TH1 Name Vane motor Fan motor Switch board Emergency operation Terminal block (Indoor unit Power (option)) Terminal block (Indoor/outdoor connecting line) Terminal block (Remote controller transmission line) Room temp. Thermistor (32°F/15!", 77°F/5.4!" Detect) TH2 Pipe temp. Thermistor/liquid (32°F/15!", 77°F/5.4!" Detect) TH5 Cond./eva. temp. Thermistor (32°F/15!", 77°F/5.4!" Detect) W.B Pcb for IR wireless remote controller LED1 LED (Operation indication : Green) LED2 LED (Preparation for heating : Orange) REC1 Receiving unit OPTION PART Wired remote controller board R.B Terminal block (Remote controller transmission line) TB6 MS 3~ <Table 1> SW1 (MODEL SELECTION) I.B 1 CNMF 6 (WHT) FUSE DB1 SWE LED2 1 Refer to tables 1and 2 1 2 CN2L (RED) 1 1 1 5 CN41 (WHT) 10 CN152 (WHT) CN151 (WHT) 9 CN90 (WHT) CN20 (RED) 1 2 1 CN44 (WHT) 4 BLK 3 X1 1 CNP(BLU) CN3C 3 (BLU) 1 LED3 1 CN32 3 (WHT) 1 CN51 (WHT) LDSWE (A) (BLU) 5 CNRU (WHT) 2 4 1 4 CN105 (RED) 1 5 CN22 (BLU) 1 2 <+1> TO OUTDOOR UNIT 6 SETTING 1 2 3 4 5 ON OFF <Table 2> SW2(CAPACITY CODE) ORN BRN S.W LDSWE (B) SWE2 1 CN30 3 (BLK) CN4F (WHT) TB4 YLW S1 ORN S2 S3 YLW ORN CN01 (BLK) LED1 ON OFF 1 3 5 W.B LED2 TB5 1 2 2 SETTING PKAA12HA4 1 2 3 4 5 PKAA18HA4 1 2 3 4 5 ON OFF ON OFF The black square ( ) indicates a switch position. RU LD101 (B) REC1 LED1 MODELS R.B 1 2 TB6 5 M RFI t° TH1 t° t° TH2 TH5 Notes: 1. SymboIs used in wiring diagram above are, : Connector, : Terminal (block). 2. Indoor and outdoor connecting wires have poIarities, make sure to match terminal numbers (S1, S2, S3) for correct wirings. 3. Since the outdoor side electric wiring may change, be sure to check the outdoor unit electric wiring diagram for servicing. 4. This diagram shows the wiring of indoor and outdoor connecting wires. (specification of 230V), adopting superimposed system of power and signal. +1 : Use copper supply wires. 10 Page 32 of 36 SECTION 6 WARRANTY Page 33 of 36 Mitsubishi Electric Mr. Slim® Split Air-conditioner and Heat-pump Systems LIMITED WARRANTY MEUS warrants as follows to the original owner of this Mr. Slim product that, if purchased from and installed by a contractor licensed for HVAC installation under applicable local and state laws within the continental United States, Alaska and Hawaii, should it prove defective by reason of defects arising from improper workmanship and/or material: A. FIVE YEAR ON PARTS. The parts are warranted for a period of five (5) years to the original end-user of this System. If it should prove defective due to improper workmanship and/or material for a period of five (5) years from the date of installation, MEUS will replace any defective part without charge for the part. Replacement parts are warranted for the remainder of the original 5-year warranty period. Parts used for replacement may be of like kind and quality and may be new or remanufactured. Defective parts must be made available to MEUS in exchange for the replacement part and become the property of MEUS. B. ADDITIONAL TWO-YEAR COMPRESSOR WARRANTY. The compressor is warranted for a total period of seven (7) years to the original end-user of this System. If it should prove defective due to improper workmanship and/or material for a period of seven (7) years from the date of installation, MEUS will replace any defective compressor without charge for the compressor. Replacement compressors are warranted for the remainder of this warranty period. Compressors used for replacement may be of like kind and quality and may be new or remanufactured. Defective compressors must be made available to MEUS in exchange for the replacement compressor and become the property of MEUS. C. NO LABOR. THESE LIMITED WARRANTIES DO NOT INCLUDE LABOR or any other costs incurred for service, maintenance, repair, removing, replacing, installing, complying with local building and electric codes, shipping or handling, or replacement of the System, compressors or any other parts. For items that are designed to be maintained or replaced by the owner, the owner is solely responsible for all labor and other costs of maintaining, installing, replacing, disconnecting or dismantling the System and parts (such as filters or belts) in connection with owner-required maintenance. Air filter cleaning and/or replacement for each applicable indoor unit are owner-required maintenance, and labor for this procedure is not covered under warranty. Please consult the applicable technical documentation for air filter cleaning and other maintenance procedures. D. Proper Installation. This Limited Warranty applies only to Systems that are installed by contractors who are licensed for HVAC installation under applicable local and state law, and who install the Systems in accordance with (i) all applicable building codes and permits; (ii) MEUS’s installation and operation instructions; and (iii) good trade practices. BEFORE REQUESTING SERVICE, please review the applicable technical documentation to insure proper installation and correct customer control adjustment for the System. If the problem persists, please arrange for warranty service. 1. TO OBTAIN WARRANTY PARTS SERVICE: (a) Contact the licensed contractor who installed the System or the nearest licensed contractor, dealer or distributor (whose name and address may be obtained on our website at www.mehvac.com) of any defect within the applicable warranty time period. (b) Proof of the installation date by a licensed contractor is required when requesting warranty service. Present the sales receipt, building permit or other document which establishes proof and date of installation. Otherwise, this Limited Warranty shall be deemed to begin one hundred twenty (120) days after the date of manufacture stamped on the System. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF COVERAGE UNDER THIS LIMITED WARRANTY. However, please return the Owner Registration Card so that MEUS can contact you if a question of safety arises. (c) This Limited Warranty applies only while the System remains at the site of the original installation and only to locations within the continental United States, Alaska and Hawaii. 2. THIS LIMITED WARRANTY DOES NOT COVER: property damages, malfunction or failure of the System, or personal injury caused by or resulting from: (a) accident, abuse, negligence or misuse; (b) operating the System in a corrosive or wet environment containing chlorine, fluorine or any other hazardous chemicals; (c) installation, alteration, repair or service by anyone other than a licensed contractor or other than pursuant to the manufacturer’s instructions; (d) improper matching of System components; (e) improper sizing of the System; (f) improper or deferred maintenance contrary to the manufacturer’s instructions; (g) physical abuse to or misuse of the System (including failure to perform any maintenance as described in the Operation Manual such as air filter cleaning, or any System damaged by excessive physical or electrical stress); (h) Systems that have had a serial number or any part thereof altered, defaced or removed; (i) System used in any manner contrary to the Page 34 of 36 Revised July 2009 Operation Manual; (j) freight damage; or (k) damage caused by force majeure or other factors such as power surge damage caused by lightning and fluctuations in or interruptions of electrical power. 3. THIS LIMITED WARRANTY ALSO EXCLUDES: (a) SERVICE CALLS WHERE NO DEFECT IN THE SYSTEM COVERED UNDER THIS WARRANTY IS FOUND; (b) System installation or set-ups; (c) adjustments of user controls; or (d) Systems purchased or installed outside the continental United States, Alaska and Hawaii. Consult the operating instructions for information regarding user controls. 4. This Limited Warranty shall not be enlarged, extended or affected by, and no obligation or liability shall arise or grow out of, MEUS providing, directly or indirectly, any technical advice, information and/or service to Owner in connection with the System. 5. EXCEPT AS OTHERWISE PROVIDED IN THIS LIMITED WARRANTY, MEUS MAKES NO OTHER WARRANTIES OF ANY KIND WHATSOEVER REGARDING THE SYSTEM. MEUS DISCLAIMS AND EXCLUDES ALL WARRANTIES NOT EXPRESSLY PROVIDED HEREIN AND ALL REMEDIES WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE. NO ONE IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN ANY RESPECT OR TO CREATE ANY OTHER OBLIGATION OR LIABILITY FOR MEUS IN CONNECTION WITH THE SYSTEM. MEUS DISCLAIMS ALL LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF ALL THIRD PARTIES (including, without limitation, the installing contractor) IN CONNECTION WITH OR RELATED TO THE SYSTEM. 6. UNDER NO CIRCUMSTANCES SHALL MEUS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, SYSTEM FAILURE, IMPAIRMENT OF OTHER GOODS, COSTS OF REMOVAL AND REINSTALLATION OF THE SYSTEM, LOSS OF USE, INJURY TO PERSONS OR PROPERTY ARISING OUT OR RELATED TO THE SYSTEM WHETHER BASED ON BREACH OF WARRANTY, BREACH OF CONTRACT, TORT OR OTHERWISE, EVEN IF MEUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. IN NO EVENT SHALL MEUS’S LIABILITY EXCEED THE ACTUAL PURCHASE PRICE OF THE SYSTEM WITH RESPECT TO WHICH ANY CLAIM IS MADE. 7. Some states do not allow limitations on warranties or exclusions or limitation of damages, so the above limitations or exclusions may not apply. 8. This Limited Warranty gives the owner specific legal rights and the owner may also have other rights that vary from state to state. 9. This Limited Warranty is valid only in the continental United States, Alaska and Hawaii, and it is not transferable. MITSUBISHI ELECTRIC & ELECTRONICS USA, INC. HVAC Advanced Products Division 3400 Lawrenceville-Suwanee Road Suwanee, GA 30024-9928 Revised July 2009 Page 35 of 36 SECTION 7 I, O & M MANUALS SUBMITTED UNDER SEPARATE COVER Page 36 of 36