Download Sharp AR-FX11 Specifications
Transcript
[00]COVER.fm 1 ページ 2004年11月12日 金曜日 午後2時22分 CODE : 00ZARFX11/A1E LASER PRINTER OPTIONS FAX EXPANSION KIT (For U.S,A., Canada, U.Kingdom, German, France) MODEL AR-FX11 OPTION AR-MM9 CONTENTS [1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [3] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 4 - 1 [5] UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . 5 - 1 [6] SIMULATIONS, FAX SOFTWARE SWITCH. . . . . . . . . . . . . . . 6 - 1 [7] KEY OPERATOR PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1 [8] TROUBLE CODE LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1 [9] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1 Parts marked with “ “ are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice. [co]CONTENTS.fm 1 ページ 2004年11月12日 金曜日 午後2時26分 CONTENTS [1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [6] SIMULATIONS, FAX SOFTWARE SWITCH 1. Entering the simulation mode . . . . . . . . . . . . . . . . . . . . 6-1 [2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2. Canceling the simulation mode . . . . . . . . . . . . . . . . . . . 6-1 3. Simulation list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 4. Detail of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 [3] SPECIFICATIONS 5. FAX software switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22 1. FAX function specification . . . . . . . . . . . . . . . . . . . . . . 3-1 [7] KEY OPERATOR PROGRAM . . . . . . . . . . . . . . . . . . . . . . 7-1 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 2. FAX mode (base screen) . . . . . . . . . . . . . . . . . . . . . . . 4-3 3. PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 [8] TROUBLE CODE LIST 1.FAX-related service call error. . . . . . . . . . . . . . . . . . . . . 8-1 2.Communication report codes . . . . . . . . . . . . . . . . . . . . . 8-1 [5] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . 5-1 [9] ELECTRICAL SECTION 1. FAX Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 2. FAX Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 [01]OUTLINE ・ CONFIGU.fm 1 ページ 2004年11月12日 金曜日 午後2時22分 [1] PRODUCT OUTLINE This unit provides the FAX function and the PC-FAX function when installed to the following machines: Machines to install this unit : • AR-M207 • AR-M165 • AR-M162 [2] CONFIGURATION Extended memory <AR-MM9> * Installed to FAX MAIN PWB. FAX Expansion Unit:1 FAX Keyboard:1 <AR-FX11> AR-FX11 PRODUCT OUTLINE • CONFIGURATION 1-1 [03]SPECIFICATIONS.fm 1 ページ 2004年11月16日 火曜日 午前9時11分 [3] SPECIFICATIONS Transmit function 1. Fax Function Specification (1) Original Original stack capacity 40 sheets. Scan cycle 23opm. Receive function (2) Compression Method MH, MR, MMR, JBIG. (3) Image Process Half tone reproduction Equivalent to 256 levels. Exposure adjustment Auto and Manual (5 steps). Resolution STANDARD (8dot/mm x 3.85line/mm). FINE (8dot/mm x 7.7line/mm). SUPER FINE (8dot/mm x 15.4line/mm). ULTRA FINE (16dot/mm x 15.4line/mm). (4) Specified Destination Specified destination Rapid keys(Max. number of keys to be stored) Speed Program Manual destination entry Chain dialing Redial Speed dialing Specified by Dial, Rapid, Speed or Group destination entry. 50 destinations (including Group). 300. Yes (9). Input via the numeric keys. Yes (Pause Key). The number last entered through the only single address sending is stored (Except time setting, Sub address and Passcode). This is used to recall address control number by using numeric keys. Special function (5) Specified Multiple Destinations Specified destination Broadcast transmission Sequential broadcasting Multi-polling Specified by Rapid, Group, Speed or manual destination entry (Broadcasting is not allowed when sub address is registered). Yes(F code inputting from ten key is excepted in the address containing F code). Yes (200 destinations). Yes. (6) Functions Transmit function Memory transmit Speaker Quick online transmit Direct transmit Manual transmit R-Key Yes. Yes. Yes. Report/List function Yes. With speaker. Speaker Key is set to R-Key (Only for SEEG). Auto reduction Yes(Original is reduced and transmit sent according to the receivingside machine). Rotation transmit Yes. Scaling transmit Yes (Scaling from regular size to regular size only. No rotation enlargement allowed). Recall Error Yes. mode Busy Yes. Number of times/interval is set via Key operator program. Book original Yes. transmit Long length Yes. original transmit Max.800m. Verification stamp No. AR-FX11 SPECIFICATIONS 3-1 Maximum number of sender registered Maximum number of transmission reserved Auto receive Manual receive Memory receive Reduction receive for standard size Rotation receive Divided receive Duplex receive 2 in 1 receive Only designated number receiving enabled Enter junk fax number External phone connection Answering phone connection Transfer function at output trouble Auto startup mode Time setting Transmit request Remote transmit Cover function Print at sender 1 sender. 50 jobs. Yes. Yes. Yes. Yes. Yes. Yes: To be defined by Key operator program. Yes. No. No. Yes (Up to 50numbers, 20digits). Yes. No (To avoid patent infringement). Yes. No. Yes. Yes. Yes. Yes. Yes (Always ON) (On/Off is possible to set only for Japan). Page division Yes. Page combination No. Confidential Yes (F code method). (machine at the other end) Relay broadcast Yes (F code method). direction Transmit Yes. message Edge erase No. Center erase No. Multi shot No. Card shot No. Confidential Yes. receive check list Program list Yes. Relay group list No. ID sender list No. Transmit/receive Yes. record Reserved Yes. transmit list Original storage Yes. check list Rapid dial list Yes. Speed dial list Yes. Group dial list Yes. Phone directory Yes. list Key operator Yes. program list Confidential ID list No. F-code setting Yes. check list Account number No. list [03]SPECIFICATIONS.fm 2 ページ Report/List function Others 2004年11月16日 火曜日 午前9時11分 Account control record Enter junk fax number list Transaction report Confidential registration list Transmission cancel list Account control Yes. Yes. Yes. Yes. Yes. 50 accounts. (7) Transmission Method Transmission time Modem speed Intercommunication Communicationline ECM R-Key 2 seconds (level: Super G3 /33600bps). 6 seconds (G3 ECM/14400bps). 33.6kbps -> 2.4kbps automatic fallback Super G3 / G3. General telephone line (PSTN), Private branch (PBX), Fax line. Yes. Available only for SEEG (with PBX setting). (8) Record Size Max. record width Record size 293mm. A3 - A5 (depends on destination). 11” x 17” - 5.5” x 8.5” (depends on destination). (9) F-Code Transmission Sub address Passcode Yes. Yes. (10)Other FAX Related Function/Remarks FAST system support PSTN supporting FAST - SEC only AR-FX11 SPECIFICATIONS 3-2 [04]ETERNALVIEWS.fm 1 ページ 2004年11月12日 金曜日 午後2時23分 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Operation panel 1 26 27 28 29 41 30 42 43 44 45 COPY A 31 B 32 F 36 G 37 K C 33 H 38 L D 34 I 39 M E J 40 N P 46 35 Q 47 U R V SHIFT T 49 W SPEAKER REDIAL/PAUSE O S 48 50 XYZ SP SPEED COMM. SETTING SYMBOL SPACE/– ON LINE DATA PRINT SCAN LINE DATA FAX 9 1 2 3 4 5 6 7 Page pallet Display [BACK] key [FAX STATUS] key [OK] key Numeric keys [C] key 8 [CA] key 9 [SPEAKER/SHIFT] key 10 [REDIAL/PAUSE] key 11 [SPEED/SYMBOL] key 12 [COMM. SETTING/ SPACE/-] key 13 Information lamp 10 11 12 13 14 15 These are used in fax mode. This key displays the base screen and the function setting screen. In a setting or programming screen, this key is used to move back to the previous screen. This is used to cancel a fax transmission or a stored fax transmission. This key is used to enter a setting that has been selected with the arrow or other keys. These are used to enter fax numbers, sub-addresses, passcodes, and numerical settings. This is used to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit is cleared each time the key is pressed.When an original is being scanned, this key can also be used to cancel scanning. This is used to cancel a transmission or programming operation. When pressed during an operation, the operation is canceled and the display returns to the base screen described on page *4 - 3*.This key is also used to cancel a resolution, paper size, or special function setting that was selected when sending a fax. This is used to dial without lifting the handset and to shift between upper and lower case when entering characters. This is used to redial the last number dialed, and enter a pause when entering a fax number. This is used to dial by Speed dialing and to enter a symbol when entering characters. This is used to switch between memory transmission and direct transmission, and to switch between automatic reception and manual reception. It is also used to enter a space or "-" when entering characters. Information lamp blinks, when facsimile is received, or when the paper remains in the tray. AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1 [04]ETERNALVIEWS.fm 2 ページ 2004年11月12日 金曜日 午後2時23分 For U.S.A. 2 3 4 5 6 7 8 FAX STATUS BACK COPY EXPOSURE PAPER ZOOM OK ABC DEF GHI JKL MNO PQRS TUV WXYZ AUTO % OUTPUT DUPLEX @.-_ SPECIAL FUNCTION SCAN COLOR MODE RESOLUTION ADDRESS FORMAT ORIGINAL SIZE DUPLEX SCAN FAX PROGRAM RESOLUTION ADDRESS BROADCAST ORIGINAL SIZE DUPLEX SCAN 16 17 18 19 20 21 ACC. #-C 23 22 READ-END 25 26 24 For other country 2 3 4 5 6 7 8 FAX STATUS BACK PAPER COPY EXPOSURE SELECT COPY RATIO AUTO IMAGE OUTPUT 2-SIDED COPY OK 14 [MODE SELECT] keys 15 [FAX] key/ FAX indicator/LINE indicator/DATA indicator 16 [PROGRAM] key 17 [RESOLUTION] key 18 [ADDRESS] key 19 [BROADCAST] key 20 [ORIGINAL SIZE] key 21 [DUPLEX SCAN] key 22 [SPECIAL FUNCTION] key 23 Arrow keys 24 [START] key 25 [ACC.#-C] key 26 [READ-END] key 17 18 19 20 21 DEF GHI JKL MNO PQRS TUV WXYZ @.-_ SPECIAL FUNCTION SCAN COLOUR MODE FORMAT RESOLUTION ADDRESS ORIGINAL SIZE DUPLEX SCAN FAX PROGRAM BROADCAST 16 ABC 23 ACC. #-C 22 READ-END 25 26 24 These are used these keys to change modes. Press to switch to fax mode. The base screen of fax mode will appear in the display. The LINE indicator lights up during transmission or reception of a fax. When a fax has been received, the DATA indicator blinks. (When there is fax transmission data in memory, the DATA indicator lights up.) Press this key to use a program. This key is used to select resolution and exposure settings. This key is used to search for a fax destination that has been stored as an auto-dial number in the address book. This is used to perform a broadcast transmission. This is used to set the size of the original to be faxed. Press this key to use the duplex scan function. (Only on models with a SPF installed.) This key is used to select a special transmission or reception function, configure function settings, and to store auto-dial numbers. These are used to select items and move through pages. This is used at the following times: (1) When starting transmission (2) When scanning an original (3) When starting manual reception (4) When configuring and storing settings Press the end the use of an account and return the display to the account number entry screen. When copying in sort mode from the document glass, press this key when you have finished scanning the original pages and are ready to start copying. NOTE • When the auto power shut-off function is activated, All lights except the mode key lights go off. For the information on the auto power shut-off function. AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2 [04]ETERNALVIEWS.fm 3 ページ 2004年11月12日 金曜日 午後2時23分 2. FAX mode (base screen) The base screen of fax mode is displayed by pressing the [FAX] key when the print mode, copy mode, or scan mode screen appears. A. The base screen of fax mode 1 2 3 4 5 1 Message display 2 3 Date and time display Transmission mode display 4 5 6 7 Exposure display Resolution display Free memory display Reception mode display 8 Original display Stand-by. 96% MAY 10 MON 10:25 AM MEMORY AUTO CONT AUTO 812 x11R STANDARD 6 7 8 Messages appear here to indicate the current status of the machine. An icon appears to the right side when a confidential fax has been received. This shows the date and time. There are three transmission modes: memory transmission, direct transmission, and manual transmission. This shows the currently selected transmission mode. This shows the exposure for scanning the original that has been selected with the [RESOLUTION] key. This shows the resolution for scanning the original that has been selected with the [RESOLUTION] key. This shows the percentage of fax memory that is free. There are two modes for receiving faxes: automatic reception and manual reception. This shows the currently selected reception mode. This displays an icon to indicate the original scanning mode when an original has been placed. : One-sided original scanning in the SPF. : Document glass. : Two-sided original scanning in the RSPF. This also shows the size of the placed original. NOTE The following functions operate even when copy mode is selected: • Automatic reception (including F-code confidential reception) • Timer Transmission • Memory polled function • Transmission of stored memory transmission jobs • Voice calls (voice calls can be answered but not placed). • Remote reception • Manual reception • Relay station function for F-code relay broadcast transmission AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-3 [04]ETERNALVIEWS.fm 4 ページ 2004年11月12日 金曜日 午後2時23分 3. PWB 2 4 3 1 1 2 3 4 FAX control PWB FAX FLASH ROM PWB TEL/LIU PWB FAX extended memory (Installed to FAX control PWB) FAX communication control FAX control program TEL line communication control <AR-MM9> AR-FX11 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-4 [05]UNPACKINGANDINSTALLATION.fm 1 ページ 2004年11月12日 金曜日 午後2時23分 [5] UNPACKING AND INSTALLATION <Before installation> • For improvement of workability, some description in this manual as well as components and accessories may change without prior notice. In this case, refer to the service manual. 2) Work the rear cover. Cut and remove the cut-out portion from the rear cover using a tool such as nippers. Be careful with the tool's direction so that the cut surface would be flat. Parts included line cable: 1 FAX Expansion Unit: 1 Screws (S tight): 4 Writing label: 4 FAX keyboard: 1 FCC label: 1 (USA, Canada only) Installation Manual: 1 Installing additional memory board (AR-MM9) * If no need to install, go on to Step 3 to continue FAX Expansion Kit Installation. Insert an additional memory board into the socket of FAX Expansion Unit. Be careful with the inserting direction. Make sure that it is securely inserted. Operation manual: 1 Turn off the main switch of the copier and then remove the power plug of the copier from the outlet. 1) Detach the rear cover. <1>Unscrew two screws from the rear cover. <2>Push to release the lock shown in the illustration below. Slide to right and remove the rear cover. 3) Install FAX Expansion Unit. <1>Hook the attaching parts of FAX Expansion Unit (two on the right) onto the copier frame as shown. <2>Hook the attaching part of FAX Expansion Unit (one on the left) onto the copier frame as shown. <3>Push the lower left side of the unit to make sure that connectors of FAX Expansion Unit and the copier are connected. <4>Secure the unit onto the copier using four supplied screws (S tight) as shown.<1>Hook the attaching parts of FAX Expansion Unit (two on the right) onto the copier frame as shown. AR-FX11 UNPACKING AND INSTALLATION 5-1 [05]UNPACKINGANDINSTALLATION.fm 2 ページ 2004年11月12日 金曜日 午後2時23分 4) Reattach the rear cover. <1>Insert the claw locks of the rear cover into the copier, and slide it to left until they are securely locked. <2>Secure the cover using two screws. 5) Remove keyboard back cover. <1>Unscrew two screws from the keyboard back cover. <2>Release the lock as shown, and remove the back cover. 8) Reattach keyboard back cover. <1>Insert the claw lock of the keyboard back cover into the copier. Make sure that the claw lock is securely inserted. <2>Secure the cover using two screws. 9) Paste FCC label on the rear cabinet of the copier. After installing FAX Expansion Kit, paste the supplied FCC label on the position shown in the illustration. USA, Canada only In order to manifest the compliance with FCC Part 68 and IC CS-03, it is required to provide the machine with the FCC Registration Number (USA), Ringer Equivalence (USA) and Ringer Eqivalence(Canada). After installing the FAX expansion kit in the machine, please put the registration label, packed with the kit, on the prescribed location. 6) Remove dummy panel. <1>Unscrew from the dummy panel. <2>Push the dummy panel up using a driver as shown, and remove it from the copier. Insert the power plug of the copier to the outlet, and then turn on the main switch of the copier. 10) Setup date and time. Press [FUNCTION] key on the Operation Panel, select [Key Operator Program], enter 5-digit key operator code, and select [FAX] mode. Select [Initial setup] and then [Date and Time]. Enter date in the order of year, Month, Day and press [OK] to set. Select [Time Setup], enter time in the order of Hour and Minute, and press [OK] to set. 7) Attach FAX keyboard. <1>Connect the copier flat cable to FAX keyboard. <2>Place the FAX keyboard onto the copier. <3>Secure the keyboard using a screw. 11) Clear image memory. * When additional memory board (AR-MM9) is installed, you must clear the memory using the Simulation [66-10]. If no additional memory is installed, there is no need for this memory clear process. 12) Connect line cable. Connect the line cable to the FAX Expansion Kit. AR-FX11 UNPACKING AND INSTALLATION 5-2 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 1 ページ 2004年11月12日 金曜日 午後2時24分 [6] SIMULATIONS, FAX SOFTWARE SWITCH 1. Entering the simulation mode Perform the following procedure to enter the simulation mode. [#] [*] [C] [*] [Main code] [START] [Sub code] [START] 2. Canceling the simulation mode When the clear all key is pressed, the simulation mode is cancelled. When the interruption key is pressed, the process is interrupted and the screen returns to the sub code entering display. * After canceling the simulation mode, be sure to turn OFF/ON the power and check the operation. Note: • If the machine is terminated by a jam error or paper empty during copying in the adjustment by the simulation, recopying is required. • The values in the simulation columns are not default values but sample values. 3. Simulation list CODE FUNCTION(Contents) MAIN SUB 22 11 FAX-related counter display 24 10 FAX-related counter clear 46 12 Density adjustment in the FAX mode (Collective adjustments) 13-16 Density adjustment in the FAX mode (Individual adjustments) 48 50 66 39 FAX sharpness adjustment 8 FAX magnification ratio adjustment (scan) 9 FAX magnification ratio adjustment (print) 8 FAX lead edge adjustment (scan) 9 FAX lead edge adjustment (print) 1 FAX soft SW setting 2 FAX soft SW initializing 3 FAX PWB memory check 4 Signal send mode 6 Print pass code print 7 Image memory content print 10 Image memory contents clear 11 300bps signal send 13 Dial test 17 DTMF signal send 19 SRAM backup 21 FAX information print 24 FAST SRAM clear 30 TEL/LIU status change check 31 TEL/LIU setting 32 Receive data check 33 Signal detection check 34 Communication time measurement 37 Speaker sound volume adjustment 38 Time setting/check 41 CI signal check 52 Pseudo ringer check AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 2 ページ 2004年11月12日 金曜日 午後2時24分 4. Detail of simulations Main code Sub code 22 11 Contents FAX-related counter display. Used to display the current FAX send/receive counter value. Sim22-11 FAX COUN. SELECT COUNTER 1:COMM. PAGE 2:COMM. TIME (1 - 3) Sim22-11 FAX COUN. SELECT COUNTER 3:PRINT PAGE 1 2 3 OK OK OK Sim22-11 FAX COUN. COMM. TIME SND:hhhhhhhh:mm:ss RCV:hhhhhhhh:mm:ss Return 10 CA key : Simulation cancel Interrupt key : Sub code input window (1 - 3) Sim22-11 FAX COUN. COMM. PAGE SND xx, xxx, xxx RCV xx, xxx, xxx 24 Remark Sim22-11 FAX COUN. PRINT PAGE xxxxxxxx Return FAX-related counter clear Used to clear the current FAX send/receive counter value (number of pages of send/receive), the accumulated time of send/receive, and the print counter to 0. Sim24-10 CLR COUN. CLEAR FAX COUNTER 1:SEND 2:RECEIVE (1 - 3) X Sim24-10 CLR COUN. CLEAR FAX COUNTER 3:PRINT PAGE (1 - 3) X CA key : Simulation cancel Interrupt key : Sub code input window 1 2 3 OK OK OK Sim24-10 CLR COUN. SEND PAGE: xx, xxx, xxx TIME: hhhhhhhh:mm:ss EXEC OK Sim24-10 CLR COUN. SEND COUN. CLEARED Return Sim24-10 CLR COUN. RECEIVE PAGE: xx, xxx, xxx TIME: hhhhhhhh:mm:ss EXEC Sim24-10 CLR COUN. PRINT PAGE xxxxxxxx EXEC OK OK Sim24-10 CLR COUN. RCV COUN. CLEARED Sim24-10 CLR COUN. FAX COUN. CLEARED Return When the number of pages of send is cleared, the PC-FAX counter is also cleared. AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-2 Return [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 3 ページ Main code Sub code 46 12 2004年11月12日 金曜日 午後2時24分 Contents Density adjustment in the FAX mode (Collective adjustments) Used to adjust the density in the FAX mode to “AUTO” or “0” - “99”. Sim46-12 EXP LEVEL AUTO XX ( 0 - 99 ) YY After input 0 - 99 OK Sim46-12 EXP LEVEL AUTO YY EXEC Sim46-12 EXP LEVEL AUTO YY SCAN EXEC Sim46-12 EXP LEVEL AUTO YY PRINT EXEC AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-3 Remark [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 4 ページ Main code Sub code 46 13-16 2004年11月12日 金曜日 午後2時24分 Contents Remark Density adjustment in the FAX mode (Individual adjustments) Used to adjust the density in the FAX mode to “AUTO” or “0” - “99”. Sim46-13 EXP LEVEL STD. 1:AE 2:MANUAL (1-2) Sim46-14 EXP LEVEL X After input 1 - 2 OK After input 1 - 4 OK Sim46-13 EXP LEVEL STD. AE (2DIGITS) Sim46-14 EXP LEVEL XX FINE AE PHOTO ON XX YY (2DIGITS) YY After input 0 - 99 After input 0 - 99 OK OK Sim46-13 EXP LEVEL STD. AE Sim46-14 EXP LEVEL YY FINE AE PHOTO ON EXEC STD. AE Sim46-14 EXP LEVEL YY FINE AE PHOTO ON EXEC SCAN Sim46-13 EXP LEVEL STD. AE PRINT Sim46-15 S-FINE 3:MANUAL(PHOTO ON) 4:MANUAL(PHOTO OFF) ) X (1 S-FINE 1:AE(PHOTO ON) 2:AE(PHOTO OFF) ) X (1 YY EXEC Sim46-16 Sim46-16 U-FINE 1:AE(PHOTO ON) 2:AE(PHOTO OFF) ) X (1 After input 1 - 4 After input 1 - 4 Sim46-15 EXEC FINE AE PHOTO ON EXEC Sim46-15 YY Sim46-14 EXP LEVEL YY PRINT YY EXEC Sim46-13 EXP LEVEL SCAN Sim46-14 EXP LEVEL FINE 3:MANUAL(PHOTO ON) 4:MANUAL(PHOTO OFF) X (1 4) FINE 1:AE(PHOTO ON) 2:AE(PHOTO OFF) X (1 4) Sim46-16 S-FINE AE PHOTO ON XX U-FINE AE PHOTO ON XX (2DIGITS) YY (2DIGITS) YY After input 0 - 99 After input 0 - 99 Sim46-15 Sim46-16 S-FINE AE PHOTO ON YY U-FINE AE PHOTO ON EXEC Sim46-15 YY EXEC Sim46-16 S-FINE AE PHOTO ON YY U-FINE AE PHOTO ON YY SCAN EXEC SCAN EXEC Sim46-15 Sim46-16 S-FINE AE PHOTO ON YY U-FINE AE PHOTO ON YY PRINT EXEC PRINT EXEC AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-4 U-FINE 3:MANUAL(PHOTO ON) 4:MANUAL(PHOTO OFF) ) X (1 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 5 ページ Main code Sub code 46 39 2004年11月12日 金曜日 午後2時24分 Contents Remark FAX sharpness adjustment Used to adjust the resolution and the filer in the FAX mode. Sim46-39 FAX IMAGE 1:STD. 2:FINE 3:S-FINE (1 - 7 ) Return Sim46-39 FAX IMAGE 4:U-FINE 5:FINE/HT 6:S-FINE/HT (1 - 7 ) 1 1 1 X 1 1 1 X Sim46-39 FAX IMAGE 7:U-FINE/HT 1 (1 - 7 ) X The current set value of each resolution is displayed. 1 - 7 input OK Specify a resolution to be set. Sim46-39 FAX IMAGE STD. X (0 - 2 ) Y 0 - 2 input Return OK Specify the kind of a filter to be set. Sim46-39 FAX IMAGE STD. Y EXEC OK Self print operation is executed. (The specified kind of the filter is used.) The specified filter is used even in the normal operation. Sim46-39 FAX IMAGE STD. Y SCAN EXEC Scanning operation Sim46-39 FAX IMAGE STD. Y PRINT EXEC Printing operation * When "Interrupt" key is pressed on a window other than the operation window, the display shifts to the sub code input window. AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-5 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 6 ページ Main code Sub code 48 8 2004年11月12日 金曜日 午後2時24分 Contents FAX magnification ratio adjustment (scan) Used to adjust and set the FAX document scan magnification ratio and scan and print the document. Sim48-8 1:OC 2:SPF 3:RSPF (1-3) SCAN RATIO X After input 1-3 OK Sim48-8 SCAN RATIO OC 1:MAIN SCAN RATIO XXX 2:SUB SCAN RATIO XXX (1-2) X After input 1-2 OK Sim48-8 SCAN RATIO OC MAIN SCAN RATIO XXX ( 1 - 255 ) YYY After input 1 - 255 OK Sim48-8 SCAN RATIO OC MAIN SCAN RATIO XXX EXEC Sim48-8 SCAN RATIO OC MAIN SCAN RATIO YYY SCAN Sim48-8 EXEC SCAN RATIO OC MAIN SCAN RATIO YYY PRINT EXEC AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-6 Remark [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 7 ページ Main code Sub code 48 9 2004年11月12日 金曜日 午後2時24分 Contents Remark FAX magnification ratio adjustment (print) Used to adjust and set the FAX print magnification ratio and scan and print the document. Sim48-9 PRI. RATIO 1:MAIN SCAN RATIO XXX 2:SUB SCAN RATIO XXX 3:MAIN SCAN/R XXX (1-4) X Sim48-9 PRI. RATIO 4:SUB SCAN/R XXX (1-4) X After input 1-4 OK Sim48-9 PRI. RATIO MAIN SCAN/R XXX ( 1 - 255) YYY After input 1 - 255 OK Sim48-9 PRI. RATIO MAIN SCAN/R YYY EXEC Sim48-9 PRI. RATIO MAIN SCAN/R YYY SCAN EXEC Sim48-9 PRI. RATIO MAIN SCAN/R YYY PRINT EXEC AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-7 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 8 ページ Main code Sub code 50 8 2004年11月12日 金曜日 午後2時24分 Contents Remark FAX lead edge adjustment (scan) Used to adjust and set the FAX document scan lead edge position and scan and print the document. Sim50-8 1:OC 2:SPF 3:RSPF (1-3) SCAN EDGE X After input 1-3 OK Sim50-8 SCAN EDGE OC 1:LEAD EDGE XX 2:LEFT EDGE XX (1-4) X Sim50-8 SCAN EDGE OC 3:REAR EDGE XX 4:RIGHT EDGS XX (1-4) X After input 1-4 OK Sim50-8 SCAN EDGE OC LEAD EDGE XX ( 43- 57 ) YY After input 43 - 57 OK Sim50-8 SCAN EDGE OC LEAD EDGE XX EXEC Sim50-8 SCAN EDGE OC LEAD EDGE XX SCAN Sim50-8 EXEC SCAN EDGE OC LEAD EDGE XX PRINT EXEC AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-8 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 9 ページ Main code Sub code 50 9 2004年11月12日 金曜日 午後2時24分 Contents Remark FAX lead edge adjustment (print) Used to adjust and set the FAX print lead edge position and scan and print the document. Sim50-9 PRINT EDGE 1:LEAD EDGE 2:LEFT EDGE 3:REAR EDGE ( 1 - 6) XX XX XX X Sim50-9 PRINT EDGE 4:LEAD EDGE/R XX 5:LEFT EDGE/R XX 6:REAR EDGE/R XX ( 1 -6 ) X After input 1-6 OK Sim50-9 PRINT EDGE LEAD EDGE/R XX ( 43- 57) YY After input 43 - 57 OK Sim50-9 PRINT EDGE LEAD EDGE/R XX EXEC Sim50-9 XX SCAN EXEC Sim50-9 66 1 PRINT EDGE LEAD EDGE/R PRINT EDGE LEAD EDGE/R XX PRINT EXEC FAX soft SW setting Used to display the FAX-related soft SW on the LCD and set and change the soft SW setting with 10-key input. Sim66-1 FAX SOFT SW ENTER FAX SOFT SW.# ( 3DIGITS ) XXX OK XXX is the input value of the soft SW number. Sim66-1 FAX SOFT SW No.XXX XXXXXXXX USE # KEY 12345678 OK Sim66-1 FAX SOFT SW No.XXX XXXXXXXX CA key : Simulation cancel Interrupt key : Sub code input window 10-key : Soft SW input bit No. input OK key : Settlement of the input value START key : Settlement of the input value C key : Input number clear for soft SW number input, disable for the following windows 1sec later To the initial window of SIM66-1 AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-9 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm Main code Sub code 66 2 10 ページ 2004年11月12日 金曜日 午後2時24分 Contents Remark FAX soft SW initializing Used to clear the FAX-related soft SW values except for the line signal adjustment value and the machine adjustment value and set them to the default values (which differ depending on the country code). Sim66-2 SOFT SW Sim66-2 SOFT SW COUNTRY CODE Japan 00000000 COUNTRY CODE Sweden 10100101 1/26 SELECT UP DN 26/26 SELECT UP DN Input of a value cannot be made. OK Sim66-2 SOFT SW COUNTRY CODE INITIAL ARE YOU SURE? EXEC OK Sim66-2 SOFT SW COUNTRY CODE INITIAL EXEC Completion of execution (Highlighted during execution) Sim66-2 SOFT SW COUNTRY CODE INITIALIZED Selection Japan U.S.A. U.K. China India Taiwan Australia New Zealand Singapore Malaysia Hong Kong Middle east Germany France Spain Portugal Denmark Norway Switzerland Italy Belgium Luxembourg Netherlands Finland Sweden 00000000 10110101 10110100 00100110 01010011 11111110 00001001 01111110 10011100 01101100 01010000 11111101 00000100 00111101 10100000 10001011 00110001 10000010 10100110 01011001 00001111 01101001 01111011 00111100 10100101 CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement START key : Settlement C key : Disable Return key : Disable 1sec later Simulation code input window 3 FAX PWB memory check Used to check read/write from/into the memory on the FAX PWB. The check result is displayed for each memory. Sim66-3 MEMOR CHK 1:DRAM 4:OPTION 2:SRAM 5:PAGE 3:FLASH 6:MODEM (1-6) X CA key Interrupt key 10-key OK key START key Return key C key : : : : : : : Simulation cancel Sub code input window Item selection Settlement and execution of the input value Settlement of the input value Returns to the selection window. Disable OK Sim66-3 MEMOR CHK DRAM EXEC OK Sim66-3 MEMOR CHK DRAM CHECKING MEMORY *Interruption with C key during execution cannot be made. EXEC Execution normal end (Highlighted during execution) Sim66-3 MEMOR CHK DRAM MEMORY CHECK RESULT OK Return SIM66-3 initial window Execution error end (Highlighted during execution) Sim66-3 MEMOR CHK DRAM MEMORY CHECK RESULT NG XXXXXXXX SUM NG NG NG NG NG NG XXXXXXXX SUM XXXXXXXX A-BUS XXXXXXXX DATA XXXXXXXX D-BUS XXXXXXXX ERASE XXXXXXXX IO Return SIM66-3 initial window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-10 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm Main code Sub code 66 4 11 ページ 2004年11月12日 金曜日 午後2時24分 Contents Remark Signal send mode Used to send signals to the line and the machine speaker by setting the signal number. (Signal send is continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from 0db and the soft SW values. Since the level setting is not required for 01 and 31 - 35, the selection menu does not appear. The signal send level is returned to the soft SW set value before execution of the mode when completing the mode. CA key : Interrupt key : C key : key : 10-key : OK key : START key : RETURN key : Sim66-4 SIGNAL OUT SIGNAL SELECT (1 - 35) Simulation cancel Sub code input window Input clear Page select Number input and item selection Input value settlement and execution Input value settlement Signal send stop 1sec later Sim66-4 SIGNAL OUT Sim66-4 SIGNAL OUT 34:DP MAKE 35:DP BREAK 1:NO SIGNAL 2:33600bps(V34) 3:31200bps(V34) (1 - 35) XX (1 - 35) XX After selection with 10-key The window is switched with the up and down keys. OK Input and switching the window are irrelevant. Not highlighted with an input of a value. Sim66-4 SIGNAL OUT The window is not switched, either. 33600bps(V34) 1:MAX When "1: NO SIGNAL" or "31: PSEUDO RNG" - "33: R.B. TONE NONE" 2:SOFT SW. is selected, "0dB" and "SOFT SW" are not selected. (1 - 2) X When one of these is selected, the second line is the signal name, the third and fourth lines are empty, and the fifth line is EXEC display. OK Sim66-4 SIGNAL OUT 33600bps(V34) 0dB EXEC After pressing OK key OK Sim66-4 SIGNAL OUT 33600bps(V34) PRESS BACK TO STOP EXEC Return SIM66-4 initial window 6 Print pass code print Used to print the confidential ID table (confidential box number, confidential box name, confidential pass code). Sharp mode confidential information is printed separately. Sim66-6 PASS CODE OK PRINT CONF. Sim66-6 PASS CODE 1sec later PRINT STORED OK EXEC OK Sim66-6 Sim66-6 PASS CODE NO DATA 1sec later CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement START key : Settlement C key : Disable Return key : Disable PASS CODE CAN NOT PRINT 1sec later AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-11 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 12 ページ 2004年11月12日 金曜日 午後2時24分 Main code Sub code Contents 66 7 Image memory content print Used to print all the image data (confidential receive contents, remote send images, and images which are not sent yet) in the image memory of the FAX section. The printed images are remained in the memory after printing. OK Sim66-7 PRINT MEMORY Remark Sim66-7 PRINT MEMORY 1sec later PRINT STORED PRINT IMAGE MEMORY EXEC OK (When there is no image memory) OK Sim66-7 PRINT MEMORY Sim66-7 PRINT MEMORY NO DATA 1sec later 10 CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement START key : Settlement C key : Disable Return key : Disable CAN NOT PRINT 1sec later Image memory contents clear Used to clear all the image data (including confidential receive contents) in the image memory of the FAX section. The management table is also cleared (initialized) at the same time. CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement Return key : Simulation code input window START key : Settlement C key : Disable Sim66-10 IMAGE CLR CLEAR IMAGE MEMORY ARE YOU SURE? EXEC After pressing OK key, during execution OK Sim66-10 IMAGE CLR CLEAR IMAGE MEMORY Completion of execution (Highlighted during execution) EXEC Completion of execution (Highlighted during execution) With prints Sim66-10 IMAGE CLR CLEARED IMAGE MEM. DO POWER OFF Power source OFF/ON Without prints Sim66-10 IMAGE CLR CLEARED Return Simulation code input window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-12 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 13 ページ 2004年11月12日 金曜日 午後2時24分 Main code Sub code Contents 66 11 300bps signal send Used to send the specified signal at the speed of 300bps by setting the signal number. (Signal send is continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from 0db and soft switch set values. The signal send level is returned to the sot SW set value before execution of the mode after completion of the mode. Sim66-11 300bps SIG. SIGNAL LEVEL 1:MAX 2:SOFT SW. (1-2) X After selection with 10-key OK CA key Interrupt key C key keys 10-key OK key START key RETURN key Remark : : : : : : : : Simulation cancel Sub code input window Input clear Page switch Item selection Input value settlement and execution Input value settlement Signal send stop Sim66-11 300bps SIG. 1:NO SIG. 2:11111 3:11110 (1-6) 4:00000 5:010101 6:00001 X After selection with 10-key OK Sim66-11 300bps SIG. NO SIGNAL EXEC After pressing OK key, during execution OK Sim66-11 300bps SIG. OUTPUTING SIGNAL PRESS BACK TO STOP EXEC Return SIM66-11 initial window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-13 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 14 ページ 2004年11月12日 金曜日 午後2時24分 Main code Sub code Contents Remark 66 13 Dial test Used to send the dial pulse and the DTMF signal, and perform the dial pulse make time adjustment and the DTMF signal send level adjustment according to necessity. Sim66-13 DIALTEST 1:PULSE 10pps 2:PULSE 20pps 3:DTMF ( 1-3 ) X Select with 10-key and press OK key. After selection with 10-key OK Sim66-13 DIALTEST PULSE 10pps INPUT MAKE TIME YY ( 26-41 ) YY After selection with 10-key OK Sim66-13 DIALTEST PULSE 10pps Yyms INPUT DIAL # XXXXXXXXXXXXX EXEC The input of 10-key enters the fourth digit. (If there are too many, scroll to the left.) Sim66-13 DIALTEST SELECT HIGH LEVEL 1:DEFAULT 2:SOFT SW. Y ( 1-2 ) X After selection with 10-key OK Sim66-13 DIALTEST INPUT HIGH LEVEL DTMF SOFT SW. Y ( 0-21 ) XX After selection with 10-key OK Sim66-13 DIALTEST Sim66-13 DIALTEST SEND 10 pps Yyms INPUT DIAL # XXXXXXXXXXXXX EXEC After pressing OK key, during execution OK Sim66-13 DIALTEST SENDING 10 pps Yyms INPUT DIAL # XXXXXXXXXXXX EXEC Completion of execution (Highlighted during execution) SIM66-13 initial window CA key Interrupt key C key 10-key : : : : OK key START key RETURN key XXXXXXXX : : : : Simulation cancel Sub code input window Input clear Input of time and dial number and selection of an item Settlement and execution of an input Settlement of an input Returns to the selection window Input dial SELECT LOW LEVEL 1:DEFAULT 2:SOFT SW. Y ( 1-2 ) X When "1" is selected OK OK When "2" is selected Sim66-13 DIALTEST INPUT LOW LEVEL DTMF SOFT SW. Y ( 0-15 ) XX Select with 10-key and press OK key. OK Sim66-13 DIALTEST DTMF HIGH:XX LOW:YY INPUT DIAL # XXXXXXXXXXXXX EXEC After pressing OK key, during execution OK Sim66-13 DIALTEST DTMF HIGH:XX LOW:YY INPUT DIAL # XXXXXXXXXXXXX EXEC Completion of execution (Highlighted during execution) SIM66-13 initial window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-14 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 15 ページ 2004年11月12日 金曜日 午後2時24分 Main code Sub code Contents 66 17 DTMF signal send Used to select the signal send level from 0dB and the soft SW set values and specify a dial number to be sent. The DTMF signal of the specified dial number is sent continuously until the interrupt command is made by pressing RETURN key. When another dial number is specified during sending of the signal, the signal send level is returned to the soft SW set value before execution of the mode after completion of the mode. Sim66-17 DTMF SIG. 1:MAX 2:SOFT SW. ( 1-2 ) X CA key Interrupt key C key 10-key OK key START key RETURN key : : : : : : : Remark Simulation cancel Sub code input window Input clear and stop Item selection, dial number input Input value settlement and execution Input value settlement and execution Signal send stop After selection with 10-key OK Sim66-17 DTMF SIG. INPUT DIAL # X EXEC The 10-key input enters the third digit. OK Sim66-17 DTMF SIG. SENDING SIGNAL X PRESS BACK TO STOP EXEC Completion of execution (Highlighted during execution) Return SIM66-17 initial window 19 SRAM backup Used to back up and restore the SRAM contents. Sim66-19 BACK UP 1:SRAM BACK UP 2:SRAM RESTORE ( 1-2 ) X After inputting 1 or 2 After pressing OK key, during execution OK Sim66-19 BACK UP OK Sim66-19 SRAM BACK UP ARE YOU SURE?EXEC After pressing OK key, during execution BACK UP NO DATA RETURN key SIM66-19 initial window OK After pressing OK key, during execution OK Sim66-19 Sim66-19 BACK UP SENDING EXEC Completion of execution (Highlighted during execution) Sim66-19 BACK UP WRONG FAX VER. SRAM BACK UP PRESS BACK TO STOP Return SIM66-19 initial window BACK UP SRAM BACK UP FINISHED CA key Interrupt key 10-key OK key START key Return key C key Return : : : : : : : Simulation cancel Sub code input window Item selection Execution Settlement of the input value Returns to the selection window. Disable SIM66-19 initial window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-15 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm Main code Sub code 66 21 16 ページ 2004年11月12日 金曜日 午後2時24分 Contents Remark FAX information print Used to print the following FAX information. Sim66-21 LIST Sim66-21 LIST 1:USER SW. LIST 2:SOFT SW. LIST 3:SYSTEM ERROR (1 - 5) X 4:PROTOCOL MONITOR 5:FAX SIMULATION (1 - 5) X After selection with 10-key OK After selection with 10-key Sim66-21 LIST OK SOFT SW. LIST EXEC After pressing OK key, during execution Printer Error OK 24 Sim66-21 LIST Sim66-21 LIST PRINT STORED CAN NOT PRINT 1sec later 1sec later SIM66-21 window SIM66-21 window CA key Interrupt key 10-key OK key START key RETURN key keys C key : : : : : : : : Simulation cancel Sub code input window Item selection Settlement and execution Input value settlement and execution Returns to the selection window. Page switch Disable FAST SRAN clear Used to clear the FAST SRAM data. FAST Correspond FAST NO Correspond Sim66-24 FAST CLR Sim66-24 FAST CLR Not Supported INITIAL EXEC After pressing OK key, during execution OK CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement START key : Settlement C key : Disable Return key : Disable Sim66-24 FAST CLR INITIAL EXEC Completion of execution (Highlighted during execution) Sim66-24 FAST CLR INITIALIZED 1sec later Simulation code input window 30 TEL/LIU status change check Used to display the change contents regardless of the soft SW setting when the status of the polarity inversion relay, the handset hook switch, or the external telephone hook switch is changed. The display of the changed status is remained until the interruption command is made by pressing RETURN key. Sim66-30 TEL STAT. EXEC CA key Interrupt key OK key RETURN key START key C key : : : : : : Simulation cancel Sub code input window Settlement Returns to the selection window Settlement Disable After pressing OK key, during execution OK Sim66-30 TEL STAT. HS2 :XXX HS1 :XXX RHS :XXX EXHS :XXX PRESS BACK TO STOP EXEC XXX: ON or OFF Return SIM66-30 initial window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-16 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm Main code Sub code 66 31 17 ページ 2004年11月12日 金曜日 午後2時24分 Contents Remark TEL/LIU setting The following bit 0/1 is alternatively switched. At the same time, the target signal name is highlighted. Sim66-31 TEL OUTPUT Sim66-31 TEL OUTPUT 1:CION 2:150VON 3:EC 4:S 5:MSR (1 - 5) (1 - 5) X X CA key Interrupt key 10-key OK key START key RETURN key keys C key : : : : : : : : Simulation cancel Sub code input window Item selection Input value settlement and execution Input value settlement and execution Returns to the selection window Page switch Input value clear. ON when highlighted. Selection of two or more items can be made. (The selected numbers are highlighted.) Though 10-key is pressed in the sequence of "1 and 5" or "5 and 1," the display is made in the sequence of the normal order (1 and 5) when OK key is pressed. After selection with 10-key OK Switchable for 5 or more items Sim66-31 TEL OUTPUT Sim66-31 TEL OUTPUT 1:CION 5:MSR 5:MSR EXEC EXEC After pressing OK key, during execution After pressing OK key, during execution OK OK Switchable for 5 or more items Sim66-31 TEL OUTPUT Sim66-31 TEL OUTPUT 1:CION 5:MSR PRESS BACK TO STOP EXEC 5:MSR PRESS BACK TO STOP EXEC Return Return SIM72-3 initial window 32 SIM72-3 initial window Receive data check Used to check receive data from the line and judge whether the following receive data and the judged data number accord together or not. If they accord, "OK" is notified. If not, "NG" is notified. Judgment is made from the receive start data and the data must be accorded continuously. CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement START key : Settlement Return key : Simulation code input window C key : Disable XX : "OK/NG" is displayed Sim66-32 RECV DATA CHECK RECEIVE DATA EXEC After pressing OK key, during execution OK Sim66-32 RECV DATA RECEIVING "RECEIVING" is displayed only during receive. EXEC Completion of execution (Highlighted during execution) Sim66-32 RECV DATA RESULT XX Return Simulation code input window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-17 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm Main code Sub code 66 33 18 ページ 2004年11月12日 金曜日 午後2時24分 Contents Remark Signal detection check Used to detect signals and display the result with ON/OFF. CA key Interrupt key C key 10-key ON key START key Sim66-33 SIGNAL CHK 1:CI FNET 2:CNG CED BT DT 3:Flag SDT DTMF (1 - 3) X : : : : : : Simulation cancel Sub code input window Input clear Item selection Input value settlement and execution Similar to OK key After selection with 10-key OK 1:CI FINET Sim66-33 SIGNAL CHK CI : FNET: Signal detection YES/NO is displayed with ON/OFF. Sim66-33 SIGNAL CHK CNG : CED : BT : DT : After pressing OK key, during execution OK DETECT EXEC 34 Sim66-33 SIGNAL CHK Flag: SDT : DTMF: Sim66-33 SIGNAL CHK CNG :OFF CED :OFF BT :OFF DT :OFF DETECT EXEC After pressing OK key, during execution OK Sim66-33 SIGNAL CHK Flag:OFF SDT :OFF DTMF:OFF DETECT Return SIM66-33 initial window Signal detection YES/NO is displayed with ON/OFF. EXEC After pressing OK key, during execution OK Return SIM66-33 initial window Signal detection YES/NO is displayed with ON/OFF. EXEC EXEC Sim66-33 SIGNAL CHK CI :OFF FNET:OFF 3:Flag SDT DTMF 2:CNG CED BT DT EXEC Return SIM66-33 initial window Communication time measurement Used to perform a send/receive test and measure and display the time required for send/receive of the image data in the communication. Sim66-34 COMM. TIME EXEC CA key : Simulation cancel Interrupt key : Sub code input window OK key : Settlement Return key : Simulation code input window START key : Settlement C key : Disable Immediately after pressing OK key, the window shifts to the next one. OK Sim66-34 COMM. TIME COMM. TIME: xxx:xx:xx:xxxms Return Simulation code input window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-18 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm Main code Sub code 66 37 19 ページ 2004年11月12日 金曜日 午後2時24分 Contents Remark Speaker sound volume adjustment Used to send the following test sounds to the line and the speaker to perform the adjustment of the sound variation and the sound volume.The send level to the line is determined by the soft SW set value. The selected sound variation and the sound volume are written into the corresponding soft SW. 1:RINGER 2:LINE MONITOR 3:ON HOOK (1-6) CA key Interrupt key C key keys 10-key OK key Simulation cancel Sub code input window Input clear Page switch Item selection, sound volume selection Settlement and execution. After completion, a sound rings for several seconds and the display shift to the selection window. START key : Input value settlement RETURN key : Returns to the selection window. Sim66-37 SPEAKER Sim66-37 SPEAKER 4:SCAN FINISH 5:TX/RX FINISH 6:DTMF (1-6) X X After selection with 10-key OK Select "4: DEFAULT VOL." Sim66-37 SPEAKER Sim66-37 SPEAKER ON HOOK SMA. 1:SMA.-1 3:LAR.-3 2:MED.-2 4:DF VOL. (1-4) X After selection with 10-key : : : : : : ON HOOK 1:SMA.2:MED.3:LAR. (1-3) Return After selection with 10-key OK After setting "DEFAULT VOL," X ON HOOKSMALL RETURN key OK Return ON HOOK 1: SMA. 2: MED. 3: LAR Sim66-37 SPEAKER Sim66-37 SPEAKER ON HOOK SMALL -1 1234567 (1-3) ON HOOK SMALL -1 PRESS BACK TO STOP EXEC RETURN key X A sound is delivered while EXEX is highlighted. OK Return Ringing until RETURN key is pressed. After completion, the display shifts to SIM66-37 window. After selection with 10-key Returns to ON HOOK 1: SMA -2 2: MED.-4 3: LAR -7 4: DEFAULT VOL. Sim66-37 SPEAKER ON HOOK SMALL -1 PRESS BACK TO STOP EXEC Return Ringing while EXEC is displayed. Ringing until RETURN key is pressed. Mute setting available Sim66-37 SPEAKER Sim66-37 SPEAKER 1:RINGER 2:LINE MONITOR 3:ON HOOK (1-6) 4:SCAN FINISH 5:TX/RX FINISH 6:DTMF (1-6) X X After selection with 10-key OK "NO SOUND" cannot be set for DTMF, either. Sim66-37 SPEAKER Sim66-37 SPEAKER LINE MONITOR SMA. 5:NON LINE MONITOR SMA. 1:SMA.-1 3:LAR.-3 2:MED.-2 4:DF VOL. (1-5) X (1-5) After selection with 10-key X When "4: DEFAULT VOL" is selected OK Return Sim66-37 SPEAKER Sim66-37 SPEAKER LINE MONITOR 1:SMA.2:MED.3:LAR. LINE MONITOR SMALL -1 PRESS BACK TO STOP EXEC (1-3) Ringing while EXEC is displayed X After selection with 10-key OK 3sec later Return Sim66-37 SPEAKER After completion, the display shifts to SIM66-37 initial window. LINE MONITOR SMALL -1 1234567 (1-3) X After selection with 10-key OK 3sec later Sim66-37 SPEAKER LINE MONITOR SMALL -1 PRESS BACK TO STOP EXEC Ringing while EXEC is displayed AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-19 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 20 ページ 2004年11月12日 金曜日 午後2時24分 Main code Sub code 66 38 Contents Remark Time setting/check Used to write/read the time (year, month, day, o'clock, minute) into/from the RTC on the FAX PWB. CA key Interrupt key 10-key OK key START key RETURN key Sim66-38 DATE & TIME DATE YEAR XXXX (2004-2062) YY C key : : : : : : Simulation cancel Sub code input window Item selection and time input Settlement Settlement Returns to the previous window or the simulation code input window. : Input value clear After inputting with 10 key, press OK key. OK Sim66-38 DATE & TIME DATE MONTH xx: The current year/month/day is displayed. yy: The input value is displayed. XX (1-12) YY After inputting with 10 key, press OK key. OK Sim66-38 DATE & TIME DATE DAY (1 xx:xx: The current time is displayed. yy: The input value is displayed. XX 31) YY After inputting with 10-key OK Sim66-38 DATE & TIME TIME XX:XX (00-23) YY After inputting with 10-key OK Sim66-38 DATE & TIME TIME XX:XX (00-59) YY After inputting with 10-key OK Sim66-38 DATE & TIME YEAR MONTH DAY 20YY YY YY EXEC OK After execution, the display shifts to the sub code input window. 41 CI signal check Used to detect the call signal from CI pin and send the call sound to the line and the speaker. The sound volume of the call sound follows the soft SW setting. The operations of signal detection and the pseudo ring sound send when the signal is detected are continued until the interruption command is made by pressing RETURN key. Sim66-41 CI SIGNAL CHECK CI SIGNAL CA key Interrupt key OK key RETURN key : : : : Simulation cancel Sub code input window Settlement Returns to the simulation code input window. EXEC After pressing OK key, during execution OK Sim66-41 CI SIGNAL CI:OFF PRESS BACK TO STOP Return When RETURN key is pressed during detection, the display shifts to SIM66-41 input window. EXEC When detected, OFF is changed to ON. Return When RETUREN key is pressed, the window shifts to SIM66-41 input window. AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-20 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 21 ページ 2004年11月12日 金曜日 午後2時24分 Main code Sub code Contents 66 52 Pseudo ringer check • The pseudo ringer sound is delivered both from the machine (speaker). • This operation is continued until the interruption command is made by pressing RETURN key. • The LCD displays the TEL/LIU status and the HOOK status. • While the pseudo ringer is delivered, the RBT )ring back tone) is delivered to the line. The bell is ON for 1sec and OFF for 2sec. Sim66-52 PSEUDO RNG PSEUDO RINGER CHK EXEC CA key Interrupt key OK key RETURN key START key : : : : : Remark Simulation cancel Sub code input window Execution Returns to the selection window. ExecutionC key: Disable After pressing OK key, during execution OK Sim66-52 PSEUDO RNG PSEUDO RINGER CHK PRESS BACK TO STOP EXEC Return SIM66-52 initial window AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-21 [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 22 ページ 2004年11月12日 金曜日 午後2時24分 5. FAX software switch A. Software switch setup change quick reference Large item Dial (Calling) Medium item Content of switch Remote Polarity inversion monitor during call-out machine Pause time setting calling disable Tone/pulse default setting DTMF signal send time Redial Dial disable SW 28-1~4 Dial disable/Erroneous dialing - SW 22-5,6 Dial disable - SW 26-1~5 Dial disable in PB(PB/FAX service,etc.) - SW 65-1~4 Dial disable in PB(PB/FAX service,etc.) - SW 64-4~8 Dial disable in PB(PB/FAX service,etc.) DTMF send level(Difference between high area and low area) - SW 65-5~8 Dial disable in PB(PB/FAX service,etc.) Minimum pause time (DTMF) setting - SW 26-6~8 Dial disable in PB(PB/FAX service,etc.) Scanner scanning completion speaker sound volume - SW 46-1,2 Scanning sound volume pattern number - SW 46-3~8 Minimum pause time (10PPS) setting - SW 19-1~4 Minimum pause time (20PPS) setting - SW 19-6~8 Dial disable in pulse Signal detection Dial tone detection - SW 21-1 Dial tone detection disable Busy tone detection - SW 21-2 Busy tone detection disable Error Number of resends in a communication error Send setup Error Resend interval in a communication error - SW 14-5~8 Error(SG3) Resend in case of an error, Super G3 disable in the last call out - SW 43-2 Number of recalls when busy Busy Resend interval when busy - SW 13-5~8 CI detection - SW 86-2,3 Not used - SW 86-6~8 CI signal OFF detection enable time - SW 87-1~7 1300Hz detection - SW 51-6 - SW 51-7 External telephone connection External telephone connection Remote switch number setting CNG detection time SG3 Inital setup - SW 13-1~4 SW 41-1 External telephone connection SW 7-1~8 Remote switch detection error - SW 21-5~8 - SW 57-1~4 External telephone call disable CNG detection disable Ring back tone OFF time - SW 57-5~8 External telephone call disable CNG detection disable Signal send level - SW 15-4~8 When the remote machine does not receive signals in a proper level Polarity inversion monitor during communication - SW 23-2 V.34 mode function - SW 43-1 Frequent errors in SG3 communication Symbol speed mask in V.34 receive - SW 43-4~6 Frequent errors in SG3 communication Countermeasures against echo in send (The hold time until signal send is set after DIS receive.) - SW69-8 An error occurs in phase B OK is displayed when RTN is received External Ring back tone ON time telephone call General Send setup Send G3/SG3 G3 Error process in RTN receive - SW73-1 Receive G3/SG3 CSI send - SW70-2 Max. length of receive - SW69-4 Substitute receive - SW9-1 Countermeasures against echo in receive (CED tone send interval) - SW69-7 SG3 Receive print Paper selection Dial disable in pulse SW 14-1~4 Busy 1300 Hz detection time Communication Inital setup Purpose of use SW 23-3 DTMF send level (High area) F-net TEL/FAX auto switch - DTMF send MAX. level Reception(Callin CI detection g) disable External telephone handset Key operator Soft SW No. Modem speed fixed in receive - SW16-5,6 EYE-Q check - SW72-7 - SW35-2 Paper selection priority order Output condition setting Receive setup An error occurs in phase B in reception SW35-3,4 Automatic reduction print - Automatic reduction magnification ratio - SW35-1 SW 35-5~8 Rotation print - SW40-1 AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-22 To disable rotation print [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 23 ページ 2004年11月12日 金曜日 午後2時24分 B. Details SW Bit No. No. 1 2 Item 1-8 Information by country Binary input 1,2 Not used 3-8 Language information 3 Switch serection and function 1 2 3 Sharp machine mode Sharp machine mode (F code) F.A.S.T. mode Binary input The corresponding character is determined by the destination information. Since the main unit (key operation) setting is reflected, it is not treated as the initial value on the soft SW list. 1 1 Center number at FAST 0 ON 0 YES 0 Host-Tel-No. 0 1 2 3 1 Monitor 0 Not monitor Communication error sound control 1 No error sound 0 Error sound Used to set whether the speaker sound is provided or not when a FAX signal from the remote machine cannot be received in FAX reception (call-in) (when the remote machine is a telephone in no response of the remote machine). 1 Sound 0 1,2 Not used 3 Flash memory check measurement range U.S.A.: U.S.A. 1 All area CA: Canada 0 Initial value 1 0 1 0 0 0 0 0 0 0 1 1 1 0 1 1 0 1 0 1 0 0 0 0 1 1 0 1 1 1 0 0 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 1 1 1 0 0 1 1 1 1 1 1 ON 0 0 0 0 0 OFF 0 0 0 0 0 NO 0 0 0 0 0 Service-No. 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 Monitor 0 0 0 0 0 Error sound 0 0 0 0 0 No sound 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Key operator No sound 4-8 Not used 5 FR Service-No. Time out between frames Communication error sound when there is no response GR NO 5-8 Not used 4 U.K OFF Enable only in U.S.A, British, German, France. 1 CA OFF Enable only in U.S.A, British, German, France. 1 4 ON U.S.A. 256 byte 256 byte U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-23 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 24 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 5 6 Item Switch serection and function 4-8 Not used 1 Auto/Manual default setting “Manual receive” can be set only when an external telephone or a handset is connected. 1 2 Manual receive 0 When this item is set to “Follows the machine information”, if the machine information is uncertain, the centimeter size is used. Bit No. 3 FR 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 Initial value Key operator Automatic receive Follows the machine information. 4 Centimeter size 0 0 Inch size 1 0 Follows the machine information. 0 1 Follows the machine information. 1 1 Not used 0 0 0 0 0 Memory send/ Direct send default setting 0 0 0 0 0 Memory send YES 1 1 1 1 1 Enable YES 1 1 1 1 1 YES 0 0 0 0 0 5 YES 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 Normal text YES 0 0 0 0 Automatic YES 1 Direct send 0 Memory send Quick memory send 1 Enable 0 Disable Remote receive command 1 YES 0 NO 1-8 Remote switch number setting When a value outside of the setting range is set, the initial value is used. Binary input Setting range : 0 - 9 1-3 Image quality priority selection Bit No. Normal text 1 1 2 3 0 0 0 0 0 0 0 0 0 Fine 0 0 1 Super fine 0 1 0 Ultra fine 0 1 1 Not used 1 0 0 Fine + Half tone 1 0 1 Super fine + Half tone 1 1 0 Ultra fine + Half tone 1 1 1 0 0 0 0 0 6 7 8 0 0 0 0 0 4-8 Density default setting 9 GR 6 8 8 U.K 5 7 7 CA Automatic receive Not used 3,4 Size specifications U.S.A. Bit No. 4 5 Automatic 0 0 0 0 0 0 0 0 0 0 Light 1 0 0 0 0 0 0 0 0 0 Slightly light 0 1 0 0 0 0 0 0 0 0 Medium 0 0 1 0 0 1 1 1 1 1 Slightly dark 0 0 0 1 0 Dark 0 0 0 0 1 Not used U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-24 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 25 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 9 2 3 Item Switch serection and function Transfer function Interface broadcast function 1 Enable 0 Disable 1 Enable 0 Disable 4,5 Not used 6 7 8 10 1 2 3 4 5 6 7 8 11 1 Cover page function default setting 1 YES 0 1 Specified number receive rejection 0 Specified number receive disregard Number specification receive rejection in manual receive 1 Specified number receive rejection 0 Specified number receive disregard F code interface broadcast function 1 Disable 0 Enable F code confidential receive function 1 Disable 0 Enable SUB capacity YES/ NO in receive 1 NO 0 YES SEP capacity YES/ NO in receive 1 Disable 0 Enable Receive PWD capacity YES/NO 1 Disable 0 Enable Bulletin board send system number judgment Send request protection Department management 1 Disable 0 Enable 1 Enable 0 Disable 1 Not protect 0 Protect Used to set Enable/Disable of the department management in the FAX mode. 1 Enable 0 CA U.K GR FR Initial value 0 0 0 0 0 Disable 1 1 1 1 1 Enable 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NO YES 0 0 0 0 0 Specified number receive disregard YES 0 0 0 0 0 Specified number receive disregard 0 0 0 0 0 Enable 0 0 0 0 0 Enable 0 0 0 0 0 YES 0 0 0 0 0 Enable 0 0 0 0 0 Enable 0 0 0 0 0 Enable 0 0 0 0 0 Disable 0 0 0 0 0 Protect 0 0 0 0 0 Disable YES YES Not used 0 0 0 0 0 3 Sender telephone number registration 0 0 0 0 0 Enable 1 1 1 1 1 Display 4 Manual send selection menu display YES/NO U.S.A.: U.S.A. 1 Disable Display CA: Canada 0 0 YES Disable 2 1 Key operator NO Number specification receive reject Receive SID capacity YES/NO U.S.A. Enable Not Display U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-25 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 26 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 11 Item 5-8 Distinctive ring Switch serection and function U.S.A. CA U.K GR FR Enable only in U.S.A., Canada, Australia, and NZL. For Australia, and NZL, selection is limited to ON or OFF. (Setting other than OFF is regarded as ON.) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 Disable 1 1 1 1 1 9times 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 Bit No. 12 1 Not used 2 Auto switch of Manual receive Auto receive 3-6 Auto switch call number of Manual receive Auto receive 13 15 6 7 8 OFF 0 0 0 0 Standard/ON 0 0 0 1 Pattern 1 1 0 0 0 Pattern 2 0 1 0 0 Pattern 3 1 1 0 0 Pattern 4 0 0 1 0 Pattern 5 1 0 1 0 Effective only for France. 1 Enable 0 OFF Key operator YES Disable Effective only for France. When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range : 1 - 9times YES 7 Not used 0 0 0 0 0 8 Remote selection type 0 0 0 0 0 Only call in When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 0 - 14 times (USA/Canada) 0 - 10 times (United Kingdom/Germany/France) 0 - 9 times (Australia/NZL) 0 0 0 0 0 2times YES 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 1 - 15min 0 0 0 0 0 3min YES 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1-4 Number of resends When this item is set to a value outside the setting range, in a communication it is regarded as the initial value. error Binary input Setting range 0 - 1times (USA/Canada/Australia) 0 - 5times (United Kingdom/Germany/France) 0 0 0 0 0 1time YES 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 5-8 Resend interval in a communication error 0 0 0 0 0 1min YES 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 0 0 0 1 1 0 0 0 1-4 Number of recalls when busy 5-8 Resend interval when busy 14 5 Initial value 1 Both of call in and call out 0 Only call in When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range : 0 - 15min 0 : Resend immediately after disconnection of the line 1-3 Not used 4-8 Signal send level U.S.A.: U.S.A. Binary input On the line : ( - X + Offset) dBm X (SW) : 0 - 26 Offset (Attenuation) -2dB : North America -1dB : Europe CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-26 Follow the destination. FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 27 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 16 Item Switch serection and function 1-4 Modem speed (V.33 mode or less) Bit No. V.27 2400bps 7 8 17 RTN EOL send number 1 1 1 1 1 0 0 0 0 Initial value 2 3 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13sec 1 1 1 1 1 6 times 1 V.27 4800bps 0 0 1 0 V.29 7200bps 0 0 1 1 V.33 14.4kbps 0 1 0 0 V.33 12.0kbps 0 1 1 0 V.17 9600bps 1 0 0 1 V.17 12.0kbps 1 0 1 0 V.17 7200bps 1 0 1 1 Other than the above Bit No. 5 6 Not fixed 0 0 V.29 - 9600bps 0 1 V.27ter - 4800bps 1 0 V.17 - 14400bps 1 1 25sec 0 6 times 0 Not fixed 13sec 12 times Not used 0 0 0 0 0 2 MH fixed (other than SG3) 0 0 0 0 0 NO (Depending on the remote machine). 1 1 1 1 1 YES 1 1 1 1 1 YES 4 ECM MMR mode (other than SG3 mode) ECM JBIG mode (other than SG3) 1 YES 0 NO (Depending on the remote machine). 1 YES 0 NO 1 YES 0 NO 5 Not used 0 0 0 0 0 6 MH fixed (in case of SG3) 0 0 0 0 0 1 YES 0 NO (Depending on the remote machine). NO (Depending on the remote machine). ECM MMR mode (in case of SG3) 1 1 1 1 1 YES 1 YES 0 NO ECM JBIG mode (in case of SG3) 1 1 1 1 1 YES 1 YES 0 NO 0 0 0 0 0 2times 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 8 1-4 Ring sound number Binary input setting Setting range : 0 - 9 times 5-8 Ring back toner limit number U.S.A.: U.S.A. Binary input Setting range 1 - 15 times 0 : No limitation CA: Canada Key operator V.17 14.4kbps 0 0 1 FR 1 0 1 GR 1 3 18 EOL detection timer U.K 0 0 5,6 Modem speed fixed in receive CA 0 V.29 9600bps V.17 14.4kbps U.S.A. U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-27 YES Fixed to 0. FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 28 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 19 Item 1-4 Minimum pause time (10PPS) setting 5 1 Binary input 0 (525ms) - 15 (900ms) X (ms) = ( N x 25 ) + 525 Not used 6-8 Minimum pause time (20PPS) setting 20 Switch serection and function Machine pseudo ringing 2-4 PBX setting Binary input 0 (375ms) - 7 (550ms) X (ms) = ( N x 25 ) + 375 1 Not ring 0 Set for other than Germany and France. Fixed to OFF. When this item is set to a value outside the setting range, it is regarded as the initial value. Bit No. SIM DTMF sound speaker selection window 6,7 Flash send wait time 8 21 1 2 3 4 Remained memory capacity for receive 2 3 4 0 0 0 Flash send 1 0 1 ID send 1 1 0 1 YES 0 Bit No. 6 7 0sec 0 0 0.5sec 0 1 1sec 1 0 2sec 1 1 64kbyte 0 Dial tone monitoring time 1 YES 0 NO 1 YES 0 NO 1 10sec 0 5sec 1 500ms 0 1000ms CED detection time 5-8 CNG detection time Binary input Setting range : 0 - 15 sec 22 1,2 Dial start wait time Bit No. U.S.A.: U.S.A. 1 2 3.5sec 0 0 4sec 0 1 5sec 1 0 6sec 1 1 CA: Canada GR FR 1 1 1 1 1 0 0 1 1 1 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Initial value Key operator Follow the destination. 375ms 0 0 0 0 0 0 0 0 0 0 Ring 0 0 0 0 0 Setup OFF 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NO 0 0 0 1 0 0 0 0 0 0 Follow the destination. 0 0 0 0 0 128kbyte 1 1 0 0 0 Follow the destination. 1 1 1 1 1 YES 0 0 0 0 0 5sec 0 0 0 0 0 1000ms 0 0 0 0 0 Fixed to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 YES 128kbyte Dial tone detection Busy tone detection U.K NO Fixed to 0 for other than Germany. 1 CA Ring Setup OFF 5 U.S.A. U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-28 3.5sec FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 29 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 22 Item Switch serection and function 3,4 CNG send start time 3 4 0.5sec Bit No. 0 0 1.0sec 0 1 1.5sec 1 0 5 6 10PPS 0 0 20PPS 0 1 TONE 1 0 5,6 Tone/pulse default setting 7 8 23 DPMUTE control DP dial pulse number process 1 Not used 2 Polarity inversion monitor during communication 3 1-3 Before-dial time (20PPS) setting 4 ON 0 OFF 1 10 - N 0 Normal (N) Fixed to “NO” for North America. 1 YES 0 Binary input 0 (50ms) - 31 (360ms) X (ms) = ( N x 10 ) + 50 Binary input 0 (50ms) - 7 (120ms) X (ms) = ( N x 10 ) + 50 Binary input Setting range 0 (50ms) - 15 (200ms) X (ms) = (N x 10) + 50 1-4 Make time (10PPS) Binary input setting Setting range 26 - 41ms 1ms interval 1-5 DTMF signal send time 6-8 Minimum pause time (DTMF) setting 27 1 Binary input 6 (60ms) - 31 (310ms) X (ms) = ( N x 10 ) Binary input 0 (90ms) - 7 (160ms) X (ms) = ( N x 10 ) + 90 Not used 2-4 Before-dial time (DTMF) setting U.S.A.: U.S.A. Binary input 0 (30ms) - 7 (100ms) X (ms) = ( N x 10 ) + 30 CA: Canada U.K GR FR Initial value 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 OFF 0 0 0 0 0 Normal (N) Key operator 0.5sec TONE YES 0 0 0 0 0 0 0 0 0 0 NO 0 0 0 0 0 NO 0 0 1 1 1 0 0 1 1 1 Follow the destination. 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 0 1 1 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 NO 5-8 Make time (20PPS) Binary input setting Setting range 9 - 24ms 1ms interval 26 CA NO Not used 5-8 OFF HOOK wait time 25 1 Polarity inversion Fixed to “NO” for North America. monitor during call- 1 YES 0 out 4-8 Before-dial time (10PPS) setting 24 Bit No. U.S.A. U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-29 50ms 100ms Follow the destination. Fixed to 0 110ms 120ms 50ms FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 30 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 27 28 Item Switch serection and function U.S.A. CA U.K GR FR 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NO YES 0 0 0 0 0 Disable YES 0 0 1 1 1 1 1 0 0 0 Follow the destination. 5-8 Call time setting When this item is set to a value outside the setting range, (TO timer setting) in it is regarded as the initial value. (Menu setting is made in automatic send the unit of 15sec). Binary input Setting range : 30 - 75sec In the unit of 5sec 0 0 0 0 0 45sec 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1-3 Silicon DAA mute boot time Binary input 0 : 3.5sec 1 : 3.0sec 2 : 2.5sec 3 : 2.0sec 4 : 1.5sec 5 : 1.0sec 6 : 0.5sec 7 : No boot 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 00 - 23 o'clock 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 700ms 0 0 0 0 0 100ms 5-8 DPMUTE OFF time Binary input setting after dial 0 (5ms) - 15 (80ms) X (ms) = ( N x 5 ) + 5 1-4 Pause time setting When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 1 - 15sec 5,6 Not used 7,8 Line open delay time in dial test 29 1 2 Report table automatic print Communication report table time specification 1 7 8 2sec Bit No. 0 0 3sec 0 1 4sec 1 0 5sec 1 1 1 1 YES 0 Enable 0 4-8 Time specification print (o'clock) 1 on the communication report table 31 1 2 0 1 Day, Month, Year 1 0 1 1 Dial tone ON/OFF detection time upper limit Used to set the lower limit of the dial tone ON/OFF detection time. Dial tone ON/OFF detection time lower limit Used to set the upper limit of the dial tone ON/OFF detection time. U.S.A.: U.S.A. 1 400ms 300ms CA: Canada 0 0 Follow the destination. 2sec YES 2sec Disable Month, Day, Year 1 Key operator NO 3,4 Sequence of year, When this item is set to a value outside the setting range, month, and date in it is regarded as the initial value. LCD, report, and Bit No. 3 4 sender record Year, Month, Day 0 0 30 Initial value YES 3.5sec 0 o'clock YES 700ms 100ms U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-30 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 31 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 31 32 Item 3-8 Time specification print (minute) 1 on the communication report table 1,2 Reception lamp 3 Print hold key operation Switch serection and function U.S.A. CA U.K GR FR When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 00 - 59min 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Disable 0 0 0 0 0 OFF There are following three patterns of flashing start conditions of the reception lam Bit No. 3 4 Pattern 1:Storing the FAX print data into the memory is notified 0 0 Pattern 2: Printing the FAX data is notified. 0 1 Pattern 3: OFF 1 0 Used to set whether print hold is enabled or disabled with the key operation. 1 4 Print hold function 0 ON 0 0min YES Pattern 1 YES YES OFF 5 Not used 0 0 0 0 0 6 Shift to the power interruption state when shutting off 1 1 1 1 1 Enable 1 1 0 0 0 Follow the destination. 0 0 0 1 1 Follow the destination. 7 8 1 Enable 0 Disable 1 AM/PM 0 24H Time display format Display with priority on the day of the week 1 YES 0 NO 1 Not used 0 0 0 0 0 2 Report output to paper smaller than A4 (LTR) 0 0 0 0 0 Reduced by the specified value. 0 0 0 0 0 FAX 1 1 1 1 1 In case of a send error 0 0 0 0 0 1 1 1 1 1 Not Print 0 0 0 0 0 NO 1 1 1 1 1 YES 3 Sender TEL mark print text judgment 4,5 Sent document content print in case of a memory send error 6 7 8 Send document content print in F code send Image adding function to the report table in memory confidential send Communication report total time and quantity print U.S.A.: U.S.A. 1 Reduced as an A4 (LTR) image. 0 Reduced by the specified value. 1 Telephone mark 0 FAX Bit No. 4 5 Not print 0 0 All print 0 1 In case of a send error 1 0 SW33 - 4,5 must be set to output setting. 1 Not print 0 Print 1 YES 0 NO 1 YES 0 NO CA: Canada Key operator Disable Used to set whether the print hold function is enabled or disabled with the function menu. To enable, the setting (SW32-3) in the key operation must be allowed. 1 33 Enable Initial value U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-31 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 32 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 34 Item Switch serection and function 1,2 Report output (receive) 3,4 Report output (send) Bit No. 1 0 0 All print 0 1 Only in an error 1 0 When this item is set to a value outside the setting range, it is regarded as the initial value. Bit No. 5 Report output (confidential receive) 6,7 Report output (sequential broadcast, sequential send request, interface broadcast send) 8 35 1 2 3 0 0 All print 0 1 Only in a send error 1 0 1 Print 0 Bit No. 6 Print Disable 0 0 All print 0 1 Only for the destination of send error 1 0 0 Not output Automatic reduction print 1 Enable 0 Disable Paper selection priority order 1 Priority on the width 0 Priority on the area When this item is set to a value outside the setting range, it is regarded as the initial value. Bit No. 5 Not used 6 Display time out setting 3 0 0 Normal 0 1 Division Enable 1 0 Binary input Setting range 0 - 15% Binary input Setting range 0 (32min) - 15 (2min) Used to set whether the FAX mode display time out is fixed to 1 min or it is linked with the key operation setting (however, less than 1 min is regarded as 1 min). Variable (Linked with 0 key operation) GR FR 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 Only in a send error YES 0 1 1 1 1 1 Print YES 0 0 0 0 0 All print YES 1 1 1 1 1 0 0 0 0 0 Not output YES 1 1 1 1 1 Enable YES 0 0 0 0 0 Priority on the area 0 0 0 0 0 0 0 0 0 0 Reduction Enable 0 0 0 0 0 6% 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Not used 0 0 0 0 0 2 1m scan specification when no rotation send setting 0 0 0 0 0 U.S.A.: U.S.A. 1m scan specification CA: Canada 0 Key operator Print Disable YES YES 2min Fixed (1 min) Fixed (1 min) 7,8 Not used 1 Initial value 4 Reduction Enable 1 37 7 Output 1-4 PC-FAX job end wait time U.K Not print 1 5-8 Automatic reduction magnification ratio CA 4 Print Disable Report output in cancel 3,4 Output condition setting 36 2 Print Disable U.S.A. Normal operation U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-32 Normal operation FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 33 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 37 3 4 5 6 38 Item Rotation send selection (A4 A4R) Rotation send selection (B5R B5) Rotation send selection (A5R A5) Rotation send selection (11” x 8.5” 8.5” x 11”) Switch serection and function 1 1 1 1 YES 0 YES 0 YES 0 YES 0 CA U.K GR FR Initial value 1 1 1 1 1 YES YES 1 1 1 1 1 YES YES 1 1 1 1 1 YES YES 1 1 1 1 1 YES YES NO NO NO Not used 1 1 1 1 1 8 Rotation scan word number calculation 0 0 0 0 0 Fraction rounded off 0 0 0 0 0 NO 0 0 0 0 0 NO 1 1 1 1 1 Save 0 0 0 0 0 1 1 1 1 1 Up to send/ receive of NSF signal 0 0 0 0 0 NO 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 Follow the destination. 0 0 0 0 0 Output 1 1 1 1 1 Output 1 1 1 1 1 297mm width 0 0 0 0 0 210mm width print 0 0 0 0 0 11inch width 1 1 1 1 1 8.5 inch width print 1 3 1 Fraction rounded up 0 Fraction rounded off 1 YES 0 NO Protocol monitor Output only in case of an error of the protocol monitor Protocol monitor save 1 1 YES 0 Save 0 NO Disable 4,5 Line sound monitor When this item is set to a value outside the setting range, range it is regarded as the initial value. Bit No. 6 Line monitor display 4 5 OFF 0 0 Up to send/receive of NSF signal 0 1 All 1 0 1 1 1 YES 0 NO 7,8 Not used 1 2 3 4 5 6 7 Receive document output setting in receive 1 Output collectively after completion of receive. 0 Output for every page receive. Data output specification in communication error during receive 1 Not output 0 Output Memory over during receive 1 Output 0 Not output Output method (AB series) in A3 width receive 1 297mm width 0 11inch width Output method (AB series) in A4 width receive 1 8.5 inch width print 0 210mm width print Output method (Inch series) in A3 width receive 1 297mm width 0 11inch width Output method (Inch series) in A4 width receive 1 8.5 inch width print 0 210mm width print U.S.A.: U.S.A. CA: Canada Key operator NO 7 2 39 U.S.A. U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-33 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 34 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 39 40 8 1 2 3 4 5 6 7 8 41 1 Item Interface data output Switch serection and function 1 YES 0 NO 1 Enable 0 Disable Rotation print Overtaking print setting 1 Overtaking print YES 0 Overtaking print NO Page number print setting 1 YES 0 NO 1 Print 0 Not print Index print setting Duplex rotation print specification 1 YES 0 NO Receive data duplex print setting 1 YES 0 NO Duplex print sequence specification 1 Print sequence (214365 • • • ) Duplex back surface print rotation direction specification 1 180 degrees rotation 0 YES 180 degrees rotation NO 1 YES NO External telephone connection 0 0 U.K GR FR Initial value 1 1 1 1 1 YES 1 1 1 1 1 Enable 1 1 1 1 1 Overtaking print YES YES 1 1 1 1 1 YES YES 0 0 0 0 0 Not print YES 1 1 1 1 1 YES 0 0 0 0 0 NO 1 1 1 1 1 Print sequence (214365 • • • ) 1 1 1 1 1 180 degrees rotation YES 1 1 1 1 1 YES 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5-8 Interval from completion of communication to next call out Only for China, this setting is enabled even in busy or no response. Binary input Setting range 0 - 15 sec 0 0 0 0 0 0 0 1 1 1 0 0 1 1 1 1 1 0 0 0 1-3 Communication completion sound length (Buzzer length) Binary input 1:2.0 sec 2:2.5 sec 3:3.0 sec 4:3.5 sec 5:4.0 sec 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 ON 1 1 1 1 1 ON 4,5 Send completion tone Bit No. 8 1 V.34 mode function in manual communication 4 0 0 1000Hz 0 1 1700Hz 1 0 6 7 Bit No. 550Hz 0 0 1000Hz 0 1 1700 1 0 1 ON 0 1 ON 0 CA: Canada Key operator YES YES Follow the destination. 3.0sec YES 1000Hz YES 1000Hz YES OFF V.34 mode function U.S.A.: U.S.A. 5 550Hz 6,7 Receive completion tone 43 CA Receive sequence (123456 • • • ) 2-4 Not used 42 U.S.A. OFF U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-34 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 35 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 43 2 3 Item Resend in case of an error, Super G3 disable in the last call out 1 Enable 0 Disable V.34 primary channel return mode 1 PPh 0 Sh 4-6 Symbol speed mask in V.34 receive 7 8 44 46 0 0 0 0 0 Disable 1 1 1 1 1 PPh 3429 1 1 1 0 0 0 0 2400 0 0 0 1 1 1 1 1 2743 0 0 1 2800 0 1 0 3000 0 1 1 3200 1 0 0 3429 1 0 1 0 0 0 0 0 1200bps 0 0 0 0 0 EQM value judged 1 1 1 1 1 33600bps 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 EQM value disregarded 0 EQM value judged U.S.A.: U.S.A. Initial value 1 Control channel retrain judgment in V.34 receive 3-8 Sound volume pattern number in DTMF send FR 0 1200bps 1,2 Speaker sound volume in DTMF send GR 1 0 3-8 Scanning sound volume pattern number U.K 6 2400bps 1,2 Scanner scanning completion speaker sound volume CA 5 1 1-4 V.34 primary channel send speed U.S.A. 4 Bit No. V.34 control channel communication speed 5-8 V.34 primary channel receive speed 45 Switch serection and function Binary input Send speed = 2400 (bps) x N However, 0 = 2400bps 15 = 33600bps Binary input Send speed = 2400 (bps) x N However, N is: 0 = 2400bps 15 = 33600bps 1 2 Mute Bit No. 0 0 Small 0 1 Medium 1 0 Large 1 1 Binary input Setting range Pattern number 1 - 35 Bit No. 1 2 Mute 0 0 Small 0 1 Medium 1 0 Large 1 1 Binary input Setting range Pattern number 1 - 35 CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-35 Key operator 33600bps Medium YES 21 Medium YES 21 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 36 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 47 Item 1,2 Line monitor speaker sound volume Switch serection and function 1 2 Mute Bit No. 0 0 Small 0 1 Medium 1 0 Large 1 1 3-8 Line monitor sound Binary input volume pattern Setting range number Pattern number 1 - 35 48 1,2 Communication completion sound speaker sound volume 3-8 Communication completion sound volume pattern number 49 1 2 Mute 0 0 Small 0 1 Medium 1 0 Large 1 1 Binary input Setting range Pattern number 1 - 35 1,2 Onhook speaker sound volume 3-8 Onhook sound volume pattern number 50 Bit No. 1 2 Medium Bit No. 0 0 Small 0 1 Medium 1 0 Large 1 1 Binary input Setting range Pattern number 1 - 35 1,2 Calling sound volume 3-8 Calling sound volume pattern number U.S.A.: U.S.A. Bit No. 1 2 Mute 0 0 Small 0 1 Medium 1 0 Large 1 1 Binary input Setting range Pattern number 1 - 35 CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 1 1 0 0 0 0 0 0 0 0 Follow the destination. 0 0 0 0 0 21 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-36 Initial value Medium Key operator YES YES 21 Medium YES 21 Medium YES 21 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 37 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 51 Switch serection and function 1,2 Busy tone detection frequency 3 4 5 6 7 8 52 Item 1 2 2pulses Bit No. 0 0 4pulses 0 1 6pulses 1 0 10pulses 1 1 Busy tone detection time upper limit 1 650ms 0 750ms Busy tone detection time lower limit 1 350ms 0 250ms Busy tone detection time lower limit 2 1 150ms 0 Follows SW51-4. 1 Not detect 0 Detect 1300Hz detection 1300 Hz detection time 1 3sec 0 2.5sec SDT signal detection 1 YES 0 NO 1,2 DT/BT detection frequency range 3 Busy tone detection level table Bit No. Mute detection level table 7,8 Mute detection level 2 Modem fixed (400Hz) 0 0 420Hz - 680Hz 0 1 360Hz - 440Hz 1 0 245Hz - 650Hz 1 1 1 Variable (SRAM) 4,5 Busy tone detection level 6 1 0 Bit No. 5 -43dB 0 0 -35dB 0 1 -33dB 1 0 -30dB 1 1 Variable (SRAM) 0 U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 750ms 0 0 0 0 0 250ms 0 0 0 0 0 Follows SW51-4. 1 1 1 1 1 Not detect 0 0 0 0 0 2.5sec 0 0 0 0 0 NO 0 0 0 0 0 1 1 1 1 1 420Hz 680Hz 0 0 0 0 0 Constant (ROM) 0 0 0 0 0 -43dB 0 0 0 0 0 0 0 0 0 0 Constant (ROM) 0 0 0 0 0 -37dB 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 Constant (ROM) When this item is set to a value outside the setting range, it is regarded as the initial value. Bit No. CA Constant (ROM) 4 1 U.S.A. 7 8 -37dB 0 0 -40dB 0 1 -43dB 1 0 Initial value Key operator 2pulses -34dB 53 1-8 Not used U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-37 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 38 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 54 55 56 57 58 Item U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1-4 Ring back tone ON Binary input time Setting range 0 - 3 sec 200ms interval Fixed to 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5-8 Ring back tone OFF time 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Binary input 0 (0.0dBm) - 48 ( - 24.0dBm) Step 0.5dBm 49 ( - 28.0dBm) 50 ( - 32.0dBm) 51 ( - 36.0dBm) 52 ( - 40.0dBm) 53 ( - 48.0dBm) 54 ( - 56.0dBm) 55 ( - 63.0dBm) 56 ( - (Mute)) 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 Binary input On the line : ( - X + Offset) dBm X (SW) : 0 -15 Offset (Attenuation) -2dB : North America -1dB : Europe 1 1 0 0 0 0 0 1 1 1 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1-8 Not used 1-8 Not used 1-8 Not used Binary input Setting range 0 - 3 sec 200ms interval 1,2 Not used 3-8 External connection sound volume 59 Switch serection and function 1-4 Signal send level Max. 5,6 Send cable amplitude equalizer U.S.A.: U.S.A. Bit No. 5 6 0db 0 0 4db 0 1 8db 1 0 12db 1 1 CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-38 Initial value Key operator Fixed to 0 Fixed to 0 -10dBm Follow the destination. 0db FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 39 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 59 60 Item 7,8 Receive cable amplitude equalizer Busy tone detection time upper limit 2 4-8 Receive gain correction 1 64 8 0 0 4db 0 1 8db 1 0 12db 1 1 1 2 - 43db 0 0 - 38db 0 1 - 33db 1 0 - 48db 1 1 Bit No. 1 950ms 0 Binary input 0 ( + 6.0dBm) - 24 ( - 6.0dBm) Step 0.5dBm Binary input 0 (10.0dBm) - 68 ( - 24.0dBm) Step 0.5dBm 69 ( - 28.0dBm) 70 ( - 32.0dBm) 71 ( - 36.0dBm) 72 ( - 40.0dBm) 73 ( - 48.0dBm) 74 ( - 56.0dBm) 75 ( - 63.0dBm) 76 ( - (Mute)) Binary input 0 (0.0dBm) - 48 ( - 24.0dBm) Step 0.5dBm 49 ( - 28.0dBm) 50 ( - 32.0dBm) 51 ( - 36.0dBm) 52 ( - 40.0dBm) 53 ( - 48.0dBm) 54 ( - 56.0dBm) 55 ( - 63.0dBm) 56 ( - (Mute)) 1-8 Not used 1-3 Ring back tone send level correction U.S.A.: U.S.A. Binary input Setting range 0 (0dBm) - 7 ( - 7dBm) CA: Canada U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Follows SW51 - 3 0 0 0 0 0 0.0dBm 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 Follows SW51 - 3 1,2 Not used 3-8 Handset MIC sound volume 63 Bit No. Not used 2-8 Sound send level 62 7 0db 1,2 Receive SED ON level 3 61 Switch serection and function U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-39 Initial value Key operator 0db - 48db - 5.0dBm 0dBm - 5dBm FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 40 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 64 65 Item 4-8 DTMF send level (High area) 1-4 DTMF send MAX. level 5-8 DTMF send level (Difference between high area and low area) 66 1 2 3 Default date, sender print Switch serection and function U.S.A. CA U.K GR FR Binary input times on the line : ( - X + Offset) dBm X (SW) : 0 - 21 Offset (Attenuation) -2dB : North America -1dB : Europe 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 1 1 1 0 0 0 0 0 Binary input Setting range 0 (0.0dBm) - 15 ( - 15.0dBm) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 ON YES 0 0 0 0 0 OFF YES 0 0 0 0 0 Outside of document YES 0 0 0 0 0 0 0 0 0 0 OFF 0 0 0 0 0 200ms 0 0 0 0 0 Setting range 0 (- 2.0dBm) - 15 ( + 5.5dBm) Step 0.5dBm 1 ON 0 OFF Date/sender print position setting 1 Inside of document 0 Outside of document 4 Not used 5 Department number print Used to set whether the department number (2-digit serial number of department) or the department code (department pass code, 5 digits) is described in the “Department” column of the communication report and the communication report table when the department function is enable. ON 0 6 7 8 1 2 3 4 Communication time measurement (image) Reduction send mode Binary input Setting range 200 - 1600ms 1 YES 0 NO 1 Normal 0 Reduction ECM 1 YES 0 NO 1 64 [bytes/frame] 0 256 [bytes/frame] ECM byte/frame Recording paper tray selection (tray 1) Recording paper tray selection (tray 2) Recording paper tray selection (tray 3) Recording paper tray selection (tray 4) U.S.A.: U.S.A. 1 1 1 1 ON 0 ON 0 ON 0 ON 0 CA: Canada Follow the destination. 0dBm 2.0dBm OFF 1-4 After sending CFR, Binary input both wait is Setting range 0 - 3000ms inhibited for 1.6sec. 5 Key operator OFF 1 6-8 Polarity inversion settlement time 68 0 Department name notification 1 67 ON Initial value 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 YES 0 0 0 0 0 Reduction 1 1 1 1 1 YES 0 0 0 0 0 256 [bytes/ frame] 1 1 1 1 1 ON YES 1 1 1 1 1 ON YES 1 1 1 1 1 ON YES 1 1 1 1 1 ON YES 1600ms YES OFF OFF OFF OFF U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-40 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 41 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 68 5 6 7 8 69 Item Duplex tray print specification (tray 1) Duplex tray print specification (tray 2) Duplex tray print specification (tray 3) Duplex tray print specification (tray 4) 1,2 Receive size specification (Indicating the receive capacity) 3 4 8 70 1 2 3 1 1 1 1 ON 0 ON 0 ON 0 ON 0 1 2 Depends on the installed cassette. Bit No. 0 0 B4 (A4/B4) 0 1 A4 1 0 A3 (A4/B4/A3)j 1 1 303mm or 255mm or 215mm Max. length of receive 1 No limitation 0 1.5m Bit No. 5 0 0 Super fine 0 1 Fine 1 0 Normal 1 1 1 500ms 0 75ms 1 500ms 0 200ms CED signal send 1 YES 0 NO 1 YES 0 NO CSI send U.S.A.: U.S.A. 6 Ultra fine Functions only for other than SG3. 1 Twice 0 CA: Canada GR FR Initial value Key operator 1 1 1 1 1 ON YES 1 1 1 1 1 ON YES 1 1 1 1 1 ON YES 1 1 1 1 1 ON YES 0 0 0 0 0 0 0 0 0 0 Depends on the installed cassette. 0 0 0 0 0 303mm or 255mm or 215mm 0 0 0 0 0 1.5m 0 0 0 0 0 Ultra fine 0 0 0 0 0 0 0 0 0 0 75ms 0 0 0 0 0 200ms 1 1 1 1 1 YES 1 1 1 1 1 YES 0 0 0 0 0 Once OFF 0 DIS receive check in G3 send U.K OFF 255mm or 215mm Countermeasures against echo in send (The hold time until signal send is set after DIS receive.) CA OFF 1 Countermeasures against echo in receive (CED tone send interval) U.S.A. OFF 11 inch receive capacity setting 5,6 Send request image quality capacity 7 Switch serection and function Once U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-41 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 42 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 70 Item 4,5 DIS receive process selection in receive 6 7 8 Enable/Disable after DIS 41Bit Interval time between DCS and TCF TCF check time Switch serection and function Bit No. 4 5 Judged as an echo has been received, and the command is resent. 0 0 The line is disconnected as an improper DIS. 0 1 When DIS is a receiver and there is a polled document, polled send is made. For the other cases, a judgment is made as an echo has been received, and the command is resent. 1 0 When DIS is a receiver and there is a polled document, polled send is made. When DIS is a transmitter, a judgment is made as an echo has been received, and the command is resent.For the other cases, a judgment is made as an improper DIS, and the times line is disconnected. 1 1 1 Disable 0 Enable 1 75ms 0 150ms Check judgment is severer for 1.3sec. 1 71 0 Telephone line time Fixed to Enable for USA and Canada. 1 5 Disable 0 Binary input Setting range 0 - 7 (1000ms - 2400ms) 1,2 RCP send number Bit No. 1 2 3times 0 0 6times 0 1 9times 1 0 12times 1 1 3-6 Flag detection byte Binary input number Setting range 0 - 15 7 8 73 1 EYE-Q check Operation in ERR frame receive Error process in RTN receive U.S.A.: U.S.A. 1 EYE-Q check only 0 O receive and EYEQ check 1 Continues the process. 0 Not continue the process (Error). 1 Not error CA: Canada 0 U.K GR FR Initial value 0 0 0 0 0 0 0 0 0 0 Judged as an echo has been received, and the command is resent. 0 0 0 0 0 Enable 1 1 1 1 1 75ms 1 1 1 1 1 1.0sec 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 O receive and EYE-Q check 0 0 0 0 0 Not continue the process (Error). 0 0 0 0 0 Error Enable Not used 6-8 Dial-in wait time CA Key operator 13.sec 1-3 Not used 4 72 1.0sec U.S.A. Follow the destination. 1400ms 3times 4 Error U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-42 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 43 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 73 Item Switch serection and function 2,3 RTN send line error rate 4,5 Timer setting (V.21 - FSK) between flag - adrs 6 Receive wait time between frames 2 3 6lines Bit No. 0 0 12lines 0 1 60lines 1 0 120lines 1 1 4 5 Bit No. 6sec 0 0 15sec 0 1 30sec 1 0 120sec 1 1 1 4.4sec 0 7,8 Min. flag number between frames 74 1-4 FSK signal settlement time in both wait 7 8 2-flag 0 0 3-flag 0 1 4-flag 1 0 5-flag 1 1 Binary input Settled time = 50 (ms) x N + 200 (ms) 7,8 Phase C head dummy data send time 75 Bit No. 5 6 0.5sec 0 0 1.0sec 0 1 1.5sec 1 0 2.0sec 1 1 7 8 0.2sec 0 0 0.3sec 0 1 0.4sec 1 0 0.5sec 1 1 1 2 2.25sec 0 0 3.0sec 0 1 4.0sec 1 0 Bit No. 1,2 CED send start wait time Bit No. 3,4 CED signal send time U.S.A.: U.S.A. Bit No. 3 4 3.0sec 0 0 4.0sec 0 1 5.0sec 1 0 6.0sec 1 1 CA: Canada CA U.K GR FR Initial value 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3.4sec 0 0 0 0 0 2-flag 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Key operator 60lines 6sec 3.4sec Bit No. 5,6 300bps preamble send time U.S.A. U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-43 400ms 1.0sec 0.2sec 2.25sec 3.0sec FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 44 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 75 Item Switch serection and function 5,6 ANSam send start wait time 5 6 2.25sec Bit No. 0 0 3.0sec 0 1 4.0sec 1 0 7 8 3.0sec 0 0 4.0sec 0 1 5.0sec 1 0 6.0sec 1 1 7,8 ANSam signal send time 76 77 78 79 80 Bit No. 1-8 Not used 1-8 Not used 1-8 Not used 1-8 Not used 1-8 Not used U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-44 Initial value Key operator 2.25sec 4.0sec FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 45 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 81 82 Item U.S.A. CA U.K GR FR 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 9byte 0 0 0 0 0 1sec 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 6-8 CI send number for Binary input shifting to non-V.34 When N=0, retrain is not made. 0 - 7 communication 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1-8 Not used 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1-8 Not used 1 2 3 V.8 mode CI signal ON time 1 18byte 0 9byte V.8 mode CI signal OFF time 1 2sec 0 1sec Not used 4,5 CI receive number for shifting to nonV.34 communication 83 84 85 86 Switch serection and function Bit No. 4 5 Not shifted 0 0 1times 0 1 2times 1 0 3times 1 1 1-8 Not used 1-8 Not used 1 Not used 2,3 CI detection When this item is set to a value outside the setting range, it is regarded as the initial value. Bit No. U.S.A.: U.S.A. 2 3 4sine wave 0 0 3sine wave 0 1 2sine wave 1 0 1 1 CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-45 Initial value Key operator 2times 2 4sine wave FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 46 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 86 Item Switch serection and function U.S.A. CA U.K GR FR 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Not used 0 0 0 0 0 1-8 Not used 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4,5 CI extinction max. OFF time Bit No. 4 0 0 10sec 0 1 15sec 1 0 20sec 1 1 6-8 Not used 87 1-7 CI signal OFF detection enable time 8 88 89 90 91 Binary input Setting range 0 - 1270ms Unit of 10ms 1-8 Not used 1-8 Not used 1-8 Not used U.S.A.: U.S.A. 5 5sec CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-46 Initial value Key operator 10sec 1200ms FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 47 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 92 93 94 95 Item 1-8 Not used 1-8 Not used 1-8 Not used 1-4 Not used 5-8 T1 timer setting 96 97 98 Switch serection and function Binary input Setting range 15 - 90 sec 5 sec interval 1-8 Not used 1-8 Not used 1-8 Not used U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-47 Initial value Key operator 40sec FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 48 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 99 Item Switch serection and function 1-8 Not used 100 1-8 Not used 101 1-8 Not used 102 1-8 Not used 103 1-8 Not used 104 1-8 Not used 105 1-8 Not used U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-48 Initial value Key operator FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 49 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. Item Switch serection and function 106 1-8 Not used 107 1-8 Not used 108 1,2 Not used 3 4 Ring ON OFFSET 1 + 100ms 0 - 1 + 100ms 0 - Ring OFF OFFSET 5-8 Not used 109 1-4 Print lead edge adjustment (Left edge position) 1 - 0 + Binary input Setting range 0 - ± 112 dots 16 dots interval 5-8 Print lead edge adjustment (Lead edge position) 1 - 0 + Binary input Setting range 0 - ± 112 lines 16 lines interval 110 1-4 Print lead edge adjustment (Rear edge position) 1 - 0 + Binary input Setting range 0 - ± 112 lines 16 lines interval 5-8 Print lead edge adjustment (Left edge position) 1 - 0 + Binary input Setting range 0 - ± 112 dots 16 dots interval 111 1-4 Print lead edge adjustment (Lead edge position) 1 - 0 + Binary input Setting range 0 - ± 112 lines 16 lines interval U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 - 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-49 Initial value Key operator + 48dots + 48lines + 48lines + 48dots + 48lines FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 50 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. Item Switch serection and function 111 5-8 Print lead edge adjustment (Rear 1 0 edge position) back Binary input surface Setting range 0 - ± 112 lines 16 lines interval 112 1-8 Print magnification ratio adjustment (Main scanning) 1 - 0 + + Binary input Setting range 0 - ± 12.7% 0.1% interval 113 1-8 Print magnification ratio adjustment (Sub scanning) 1 - 0 + Binary input Setting range 0 - ± 12.7% 0.1% interval" 114 1-4 Scan effective image area (OC) 1 0 Sub scanning Lead Binary input edge image loss Setting range 0 - ± 56 lines 8 lines interval 5-8 Scan effective image area (OC) 1 0 Sub scanning Rear Binary input edge image loss Setting range 0 - ± 56 lines 8 lines interval 115 1-4 Scan effective image area (OC) Main scanning left edge image loss 1 - 0 U.S.A.: U.S.A. + + Binary input Setting range 0 - ± 56 dots 8 dots interval 5-8 Scan effective image area (OC) 1 Main scanning right Binary input edge image loss Setting range 0 - ± 56 dots 8 dots interval 116 1-8 Scanning magnification ratio adjustment OC (Main scanning) + 1 - 0 0 + + Binary input Setting range 0 - ± 12.7% 0.1% interval CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-50 Initial value Key operator + 48lines 0% 0% 0line 0line 0dot 0dot 0% FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 51 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. Item 117 1-8 Scanning magnification ratio adjustment OC (Sub scanning) 118 1-4 Scan effective image area (SPF), Sub scanning, Lead edge image loss 5-8 Scan effective image area (SPF), Sub scanning, Rear edge image loss Switch serection and function 1 - 0 + Binary input Setting range 0 - ± 12.7% 0.1% interval 1 - 0 + Binary input Setting range 0 - ± 56 lines 8 lines interval Since the rear edge of the SPF cannot be specified with the coordinates, it is subtracted after scanning. Since the setting value is not a coordinate, its unit differs from those of the other setting values. The value cannot be increased more than the coordinates specified when scanning. 1 - 0 + 0 + U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Initial value Key operator 0% 0line 0line Binary input Setting range 0 - ± 14 lines 2 lines interval 119 1-4 Scan effective image area (SPF), 1 Main scanning, Left Binary input edge image loss Setting range 0 - ± 56dots 8dots interval 5-8 Scan effective image area (SPF), Main scanning, Right edge image loss 120 1-4 Scan effective image area (SPF) back surface, Sub scanning, Lead edge image loss 5-8 Scan effective image area (SPF) back surface, Sub scanning, Rear edge image loss 1 - 0 + Binary input Setting range 0 - ± 56dots 56dots interval 1 - 0 + Binary input Setting range 0 - ± 56lines 8 lines interval Since the rear edge of the SPF cannot be specified with the coordinates, it is subtracted after scanning. Since the setting value is not a coordinate, its unit differs from those of the other setting values. The value cannot be increased more than the coordinates specified when scanning. 1 - 0 + 0 + 0dot 0dot 0line 0line Binary input Setting range 0 - ± 14 lines 2 lines interval 121 1-4 Scan effective image area (SPF) 1 back surface, Main Binary input scanning, Left Setting range 0 - ± 56dots image loss 8dots interval U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-51 0dot FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 52 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. Item Switch serection and function 121 5-8 Scan effective image area (SPF) 1 back surface, Main Binary input scanning, Right Setting range 0 - ± 56dots edge image loss 56dots interval 122 1-8 Scanning magnification ratio adjustment SPF (Main scanning) 123 1-8 Scanning magnification ratio adjustment SPF (Sub scanning) 1 - 0 + 1 - 0 + Binary input Setting range 0 - ± 12.7% 0.1% interval 125 1-8 Print magnification ratio adjustment, 1 back surface (Sub Binary input scanning) Setting range 0 - ± 12.7% 0.1% interval 126 1-8 Scanning magnification ratio 1 adjustment APF, Binary input back surface (Main Setting range 0 - ± 12.7% scanning) 0.1% interval U.S.A.: U.S.A. + Binary input Setting range 0 - ± 12.7% 0.1% interval 124 1-8 Print magnification ratio adjustment, 1 back surface (Main Binary input scanning) Setting range 0 - ± 12.7% 0.1% interval 127 1-8 Scanning magnification ratio adjustment APF, back surface (Sub scanning) 0 1 - 0 0 0 0 + + + + Binary input Setting range 0 - ± 12.7% 0.1% interval CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-52 Initial value Key operator 0dot 0% 0% 0% 0% 0% 0% FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 53 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. Item 128 1,2 Ring sound quality Switch serection and function Calling sound ringing frequency setting There are following four patterns: 1 2 Pattern 1 (1000Hz/926Hz) Bit No. 0 0 Pattern 2 (1035Hz/956Hz) 0 1 Pattern 3 (1048Hz/967Hz) 1 0 Pattern 4 (1119Hz/1027Hz) 1 1 3-8 Not used 129 1-8 Not used 130 1-8 Not used 131 1-8 Not used 132 1-8 Not used 133 1 Test mode judgment flag 1 Test mode 0 CA: Canada CA U.K GR FR 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Normal mode 2-8 Not used U.S.A.: U.S.A. U.S.A. U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-53 Initial value Key operator Pattern 2 Normal mode FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 54 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. 134 1 Item Summer time Switch serection and function U.S.A. CA U.K GR FR Used to set whether the summer time is automatically set or not. 0 0 1 1 1 Follow the destination. 0 0 0 0 0 Recorded 0 0 0 0 0 10s 1 1 1 1 1 0 0 0 0 0 Not output 0 0 0 0 0 Send error pages are not included. 0 0 0 0 0 1 1 1 1 1 Setting is displayed. 0 0 0 0 0 26sec 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 2 Receive rejection record 0 Not recorded 0 When send is made via a satellite, if the DIS signal is not acknowledged, the receive level is adjusted again and receive is tried again. This setting is used to set the time until resetting. 6 3 4 8s 0 0 10s 0 1 12s 1 0 14s 1 1 Report table output Used to set whether the communication report is when in receive outputted or not when receive is rejected with the receive rejection rejection function. ”Output” is enabled only when SW1342 is set to “0”. 1 Sheet count method in case of an error Not used 8 YES/NO of quick memory send setting 0 Not output Used to set whether an error page is included in the send quantity count in FAX send or not. The default is: an error page is not counted. 1 7 Output Send error pages are 0 included. Send error pages are not included. Used to set whether the quick memory send ON/OFF is displayed on the menu or not. 1 Setting is displayed. 0 Setting is not displayed. 135 1-4 Scanner resource Used to set the time out of the scanner warm-up time in securing time out in direct send. direct send Binary input 20 - 50 sec 5 Energy-saving reset with an external TEL Used to set whether the machine is reset from the energy-saving mode or not when the hand set of the external telephone is lifted in the energy-saving mode. The default is: Not reset in Japan only. 1 6 Not used 7 External auditor check 8 Not used 1 RTC error adjustment Not check 0 Error adjustment CA: Canada 0 Reset (Complete reset) Not reset (Only 24V is reset.) Check Check Used to correct advancement of the clock. The default is No Correction. 1 U.S.A.: U.S.A. 0 Used to set whether Enable/Disable of the FAX department management when an external auditor is used. The default is Disable. 1 136 Reset (Complete reset) YES Recorded Bit No. 5 Key operator Disable Used to set whether the rejected record is remained on the communication report or not when receive is rejected by the receive rejection function. 1 3,4 Time until resetting when G3 DIS cannot be received in V.8 phase. Enable Initial value No error adjustment No error adjustment U.K: U.Kingdom GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-54 FR: France [06]SIMULATIONS ・ FAXSOFTWARESWITCH.fm 55 ページ 2004年11月12日 金曜日 午後2時24分 SW Bit No. No. Item Switch serection and function 136 2-8 Not used 137 to 150 Not used U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom U.S.A. CA U.K GR FR 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GR: German AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-55 Initial value Key operator FR: France [07]KEY OPERATOR.fm 1 ページ 2004年11月16日 火曜日 午後5時55分 [7] KEY OPERATOR PROGRAM KEY OPERATOR PROGRAM LIST PRINT/SET Set value(Default) LIST PRINT KEY OPE. LIST JUNK FAX # LIST ACC. USAGE LIST LIST SETTING (PRINT SELECTION) TRANSMISSION ALWAYS PRINTS/ ERROR ONLY*/ NEVER PRINTS BROADCAST ALWAYS PRINTS*/ ERROR ONLY/ NEVER PRINTS Remark ORIGINAL IMAGE PRINT SETTING ALWAYS PRINTS/ ERROR ONLY*/ NEVER PRINTS LIST SETTING (AUTO LISTING) INITIAL SETTING RECEPTION ALWAYS PRINTS/ ERROR ONLY/ NEVER PRINTS* CONF. RECEPTION ALWAYS PRINTS*/ NEVER PRINTS AUTO PRINT REPT AT LIMIT (50) Print/Not print* PRINT DAILY AT DESIGNATED TIME NOT SETTING DIAL MODE Tone*/20PPS/10 PPS PAUSE TIME 1,2* - 15sec OWN PASSCODE SET SPEAKER VOLUME TX/RX END SOUND On-hook volume High/Middle*/Low Ringer volume Line monitor volume TX/RX end volume Scan end volume Tone volume High/Middle*/Low/OFF SEND PATTERN 1/2*/3 RECEIVE PATTERN 1/2*/3 END SOUND LENGTH 2.0/2.5/3.0*/3.5/4.0sec EXTENSION TEL ON*/OFF DISTINCTIVE RING OFF*/STANDARD(For SCA/SCNZ/SRH) OFF*/STANDARD, PATTERN1/2/3/4/5(For SEC/SECL) PBX SETTING MODE ON/OFF* REMOTE RECEPTION*1 0 - 5* - 9 ACCOUNT CONTROL ACCOUNT # SET Enabled/Disabled* Program, Delete, Change DATE & TIME SET DAYLIGHT SAVING TIME SETTING ON*/OFF(For SUK/SEEG/SEF/SCA/SCNZ) ON/OFF*(For SEC/SECL) DISABLE FAX PRINT HOLD ON*/OFF AR-FX11 KEY OPERATOR PROGRAM 7-1 For SEEG/ SEF only [07]KEY OPERATOR.fm 2 ページ 2004年11月16日 火曜日 午後5時55分 KEY OPERATOR PROGRAM SENDING FUNCTION RES. CON. SET Resolution Exposure AUTO REDUCE TX RCV. FUNCTION Set value(Default) Auto* Enabled*/Disabled ROTATE TX Enabled*/Disabled PAGE COUNTER SET Enabled*/Disabled SEND MODE MEMORY TX*/DIRECT TX QUICK ON LINE TX Enabled*/Disabled PRINT STATION # IN RCVD DATA Out*/IN DATA ACC. NAME PRINT Enabled/Disabled* RECALL SETTING (BUSY)*2 2 recall attempts at intervals of 3 minutes. RECALL SET (ERR)*2 1 recall attempt at intervals of 1 minute. RING TIMEOUT IN AUTO TX 30/45*/60sec 30/45*(For SRH/SOCC) AUTO COVER SHEET Enabled/Disabled* FAX RECEPTION LIGHT PATTERN1*/2/OFF #OF RINGS AT. RX 0 - 2* - 9 0 - 2* - 15(For /SRS/SRCC/SBI) #OF RINGS MAN. RX 0*-9 TRAY SELECTION TRAY1,TRAY2, TRAY3 Enabled*/Disabled RECEIVED DATA PRINT CONDITION REDUCTION*/DIVISION AUTO RCV REDUCE TO REGULAR SIZE Enabled*/Disabled DUPLEX RECEPTION*3 ON/OFF* A3 RX REDUCE ON/OFF* FW. RX DATA Enabled/Disabled* RECEIVED DATA FW. STATION SET INDEX PRINT Enabled/Disabled* EARLIER OUTPUT Enabled*/Disabled ANTI JUNK FAX Enabled/Disabled* ENTER JUNK FAX # POLLING SECURITY Remark STANDARD*/FINE/SUPER FINE/ ULTRA FINE/FINE (HALF TONE) / S-FINE (HALF TONE) / U-FINE ( HALF TONE) POLLING SECURITY Enabled*/Disabled POLLING PASSCODE # MODE *1)Only when an extension phone is connected. *2)If you do not wish to have recalling take place, set the number of attempts to “0”. *3)Only on models with the two-sided printing function. AR-FX11 KEY OPERATOR PROGRAM 7-2 For SEC/ SECL only For SEF only [08]TROUBLE CODE.fm 1 ページ 2004年11月12日 金曜日 午後2時25分 [8] TROUBLE CODE LIST 2. Communication report codes MAIN SUB 1. FAX-related service call error MAIN SUB F6 U1 00 F6 FAX board When sending cannot be made due to buffer communic over. ation trouble 10 FAX hard error 80 FAX break When an error is detected in the IO ASIC error serial controller. 81 FAX parity error 82 FAX overrun error Conditions FAX board When sending cannot be made due to buffer communic over. ation trouble When one of the following items is detected. Page Memory Error/ FAX Board Error/ ROM Error/ RAM Error/ Flash ROM Error. Conditions 00 When either of Bit3 - Bit7 is set. 10 FAX hard error 80 FAX break When an error is detected in the IO ASIC error serial controller. 81 FAX parity error 82 FAX overrun error 84 FAX framing error 84 FAX framing error 88 88 FAX interface error There is no response of data from the machine for 30 sec or more. 99 FAX language error When the TEL/LIU PWB for EX Japan is operated under the setting for Japan. When the TEL/LIU PWB for Japan is operated under the setting for EX Japan. FAX interface error. FAX command time out error. 03 FAX battery error When the battery voltage on the FAX PWB falls. When SSH Bit2 (Interface Error) is set. When there is no response of the command which has response for 30 sec or more. R_REL_REQ->R_REL_REQ_ACK R_ENABLE->R_ENABLE_ACK R_RSV_CAN->R_RSV_CAN_ACK STARTING_REQ->STARTING_ACK DOWNLD_REQ->DOWNLD_ACK F_CINFO->F_CINFO INF_AUDIT_CODE->INF_AUDIT_CODE CHECK_AUDIT_CODE>CHECK_AUDIT_CODE HAND_REC_REQ->HAND_REC_ACK GET_TIME->SEND_TIME S_SIM_REQ->S_SIM_ACK CFG_START->CFG_START_ACK F_P_COMPLETE->F_P_COMPLETE_ACK F_SEJCT->F_SEJCT_ACK LANGU_INFO->LANGU_INFO WEBPAGE->WEBPAGE 99 FAX language error In the response LANGU_INFO for SETUP, the parameter is sent back as 0xfe. 03 FAX battery error When SSH Bit0 (Battery Error) is set. U1 AR-FX11 TROUBLE CODE LIST 8-1 AR-FX11 ELECTRICAL SECTION 9-1 HAND SET SPEAK ER EX TEL LINE COPIER CPU COPIER PRINTER COPIER SCANNER PCL PCFAX ADD-ON MEMORY (AR-MM9) 8MB PSUED RINGER (JAPAN ONRY) SILICONDAA TEL/LIU PWB MODEM MN195006-E BACK UP MEMORY SRAM 2Mbit ADD-ON MEMORY CONNECTOR 3x3 VERTICAL SCANNING 2/3X BUS BUFFER RTC PRINT PROCESS FLOW Resoluti on convert ion CPU (SH7709A) SI-3000 (Japan only) MEM ORY back up PRINT I/F SCAN I/F FAX IMAGE MEMORY FLASH ROM 16Mbit WORK MEMORY SDRAM 16Mbit x 2 PROGRAM FLASH ROM (JAPAN)16Mb x2 (EX)8Mb x 2 IMAGE ROTATI NG PAGE MEMORY SDRAM 128Mbit SDRAM CONTROL SCANNING PROCESS FLOW SRAM CONTROL IMAGE PROCESSING GATE ARRAY IMAGE PROCESSING MEMORY SRAM 1Mbit CPU I/F VERTICAL SCANNING 1/2X FAX GA I/F SRAM 1Mbit MN8606 5 I/F VOICE IC I/F DMAC CONTR OL RTC I/F CPU I/F MODE M CONTR OL GATE ARRAY I/F CEDEC IC MN86065 MN86065 I/F MN8606 5 I/F SRAM CONTR OL SYSTEM CONTROL GATE ARRAY IMAGE ROTATING FAX UNIT FAX UNIT MAIN PWB CEDEC MEMORY SRAM 1Mbit [09]ELECTRICALSECTION.fm 1 ページ 2004年11月12日 金曜日 午後2時25分 [9] ELECTRICAL SECTION 1. FAX Block diagram FAX BLOCK DAIGRAM A B C 4 1 X1 VDD OE GND OUT 2 3 R49 R45 GND + 8 C6 A33u/10 GND GND R54 0 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 + GND 1 GND TP799 1 GND TP557 1 GND TP800 1 TP801 C7 A33u/10 R24 R(NM) BR7 BR8 MNR04 4.7K MNR04 4.7K BR9 MNR04 4.7K R5 3.3K R3 R4 VOL[A] VOL[A] R12 10K TP76 TP31 TP15 TP18 TP21 TP24 GND 164 171 169 168 174 170 176 C9 C270p/25 C5 1 2 3 4 C10 R15 R16 820 820 TP88 R10 6.8K R11 0(3216)(NM) C11 C12 C13 C14 C15 C16 TP175 TP163 C17 GND C18 C19 F0.1u/16 +3.3V MD3 C20 C21 R42 R39 C22 10K 10K Q1 KRC105S-RTK/P SRAMCLRC B TP89 JP1 SD00415-52(NM) LED1 SML-310VTT86K 1 2 TP102 K +3.3V R20 820 1 2 R21 820 LED2 SML-310VTT86K JP2 SD00415-52(NM) R25 R(NM) GND A R27 R(NM) D1 IC3 GND TP119 XIN VDD 8 7 XOUT FS0 FS1 MODOUT 6 LF VSS 5 R32 0 P2782AF-08SR C3 +5V +3.3V GND 330F F0.1u/16 C4 R34 TP122 AU DCK C23 R43 R40 C24 GND R(NM) C25 R(NM) R(NM) R33 C26 C27 10K 10K 10K R44 10K R38 R41 10K 10K 10K 10K 100 R35 R31 R28 R22 R17 R19 CPU_CKIO PWOFFDA204KT146 CPURESKA LED +3.3V L_BT- 7 TP111 C28 TP158 TP161 TP138 TP141 TP144 TP147 TP150 TP153 TP123 TP126 TP130 TP133 10K R62 GND 7 10K R61 GND TP214 TP215 RGDT- R63 GND 100 C30 B1000p/50 6 DQMUU DQMUL TP227 TP230 10K 10K R66 R67 R64 R65 +3.3V 33 33 CI 5 TP217 TP219 TP221 TP222 TP223 TP224 TP225 TP226 TP228 TP231 184 143 142 141 140 126 129 11 125 110 107 92 91 208 198 148 147 173 153 152 132 79 27 181 161 109 95 83 69 57 45 33 19 6 3 21 35 47 59 71 85 97 111 163 183 29 81 134 154 175 145 150 205 146 149 197 196 195 2 1 144 155 156 4 5 194 193 124 TP116 204 TP103 TP106 112 206 TP97 TP90 151 128 139 137 136 138 0 100 100 R526 R527 33 33 R545 R546 166 172 165 167 CPU_TCK CPU_TMS TRSTC PU_TDI CPU_TDO ASEBRKRKR9 RTC_DIR FAXCMD FAXSTS FAXSRDYFAXCRDY- RTC_CLK RTC_DATA TP2 TP6 127 135 133 131 130 94 R6 4.7K 100 100 R2 4.7K ASMD0AUDATA0 AUDATA1 AUDATA2 AUDATA3 AUDSYN C- +3.3V TP1 TP5 R1 4.7K +3.3V F0.1u/16 B470p/50 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 B470p/50 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 C8 +1.8V FB5 MEM2012(NM) 0 GND R26 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 NCS036-014-DS(NM) 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 C N2 GND PCTXD PCRXD FB8 MEM2012(NM) GND R53 F0.1u/16 +1.8V GND FB7 0 0 C2 SG-8002JC 19.6608M PCC-L2 R29 R(NM) +3.3V FB4 MEM2012(NM) MEM2012(NM) +3.3V 0 GND R14 4 3 2 1 CN1 B4B-PH-K-S(NM) 5 6 7 8 4 3 2 1 D 5 6 7 8 4 3 2 1 FAX MAIN PWB(CPU) 10K 8 7 6 5 1 2 3 4 R37 0 R23 R(NM) R36 E A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 D31/PTB(7) D30/PTB(6) D29/PTB(5) D28/PTB(4) D27/PTB(3) D26/PTB(2) D25/PTB(1) D24/PTB(0) D23/PTA(7) D22/PTA(6) D21/PTA(5) D20/PTA(4) D19/PTA(3) D18/PTA(2) D17/PTA(1) D16/PTA(0) D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 4 CASLL/CASL/PTJ(2) RAS3L/PTJ(0) CKE/PTK(5) AN(7)/DA(0)/PTL(7) AN(4)/PTL(4) AN(3)/PTL(3) AN(2)/PTL(2) AN(1)/PTL(1) AN(0)/PTL(0) STATUS1/PTJ(7) STATUS0/PTJ(6) CASHH/PTJ(5) TCLK/PTH(7) IRQ4/PTH(4) CAS2L/PTE(6) CE2B/PTE(5) CE2A/PTE(4) CAS2H/PTE(3) RAS3U/PTE(2) RAS2U/PTE(1) TDO/PTE(0) DACK1/PTD(7) DACK0/PTD(5) WAKEUP/PTD(3) MCS(7)/PTC(7)/PINT(7) MCS(6)/PTC(6)/PINT(6) MCS(5)/PTC(5)/PINT(5) MCS(4)/PTC4)/PINT(4) MCS(3)/PTC(3)/PINT(3) MCS(2)/PTC(2)/PINT(2) MCS(1)/PTC(1)/PINT(1) MCS(0)/PTC(0)/PINT(0) IRQOUT IRQ2/IRL2/PTH(2) IRQ1/IRL1/PTH(1) IRQ0/IRL0/PTH(0) DREQ0/PTD(4) DREQ1/PTD(6) DRAK0/PTD(1) DRAK1/PTD(0) CS0/MCS(0) CS2/PTK(0) CS3/PTK(1) CS4/PTK(2) CS5/CE1A/PTK(3) CS6/CE1B CKIO WAIT BREQ BACK RD WE0/DQMLL WE1/DQMLU/WE RD/WR BS/PTK(4) HD6417709AF100BV RESETOUT/PTD(2) IRLS(0)/PTF(0)/PINT(8) IRLS(1)/PTF(1)/PINT(9) IRLS(2)/PTF(2)/PINT(10) IRLS(3)/PTF(3)/PINT(11) IOIS16/PTG(7) PTG(4) IRQ3/IRL3/PTH(3) ADTRG/PTH(5) CASLH/CASU/PTJ(3) RAS2L/PTJ(1) WE3/DQMUL/ICIOWR/PTK(7) WE2/DQMUL/ICIORD/PTK(6) AVss AVss Vss-PLL2 Vss-PLL1 Vss Vss Vss Vss Vss Vss VssQ VssQ VssQ VssQ VssQ VssQ VssQ VssQ VssQ VssQ Vss(RTC) Vcc(RTC) VccQ VccQ VccQ VccQ VccQ VccQ VccQ VccQ VccQ VccQ Vcc Vcc Vcc Vcc Vcc Vcc-PLL1 Vcc-PLL2 AVcc(3.3V) CAP1 CAP2 MD5 MD4 MD3 MD2 MD1 MD0 XTAL EXTAL XTAL2 EXTAL2 CA NMI RESETP RESETM AN(5)/PTL(5) CASHL/PTJ(4) AN(6)/DA(1)/PTL(6) AUDCK/PTH(6) ASEBRKAK/PTG(5) TCK/PTF(4)/PINT(12) TMS/PTF(6)/PINT(14) TRST/PTF(7)/PINT(15) TDI/PTF(5)/PINT(13) ASMD0/PTG(6) AUDATA(0)/PTG(0) AUDATA(1)/PTG(1) AUDATA(2)/PTG(2) AUDATA(3)/PTG(3) AUDSYNC/PTE(7) TxD0/SCPT(0) RxD0/SCPT(0) SCK2/SCPT(5) TxD2/SCPT(4) RxD2/SCPT(4) RTS2/SCPT(6) CTS2/IRQ5/SCP(7) TxD1/SCPT(2) RxD1/SCPT(2) SOK0/SCPT(1) SCK1/SCPT(3) IC1 108 106 105 207 203 202 201 200 199 158 157 113 159 12 116 104 103 117 118 119 120 115 114 182 177 178 179 180 185 186 187 188 TP232 TP234 TP236 TP193 TP191 TP192 191 192 189 190 160 10 9 8 4 3 2 1 R56 R57 TP178 TP180 TP182 TP184 TP186 TP188 96 98 99 100 101 102 33 33 R68 R69 R70 33 33 33 33 5 6 BR38 7 MNR04 33 8 33 33 5 6 BR37 7 MNR04 33 8 33 33 33 33 33 33 33 BR18 MNR04 33 BR16 MNR04 33 BR14 MNR04 33 BR12 MNR04 33 BR10 MNR04 33 BR5 MNR04 33 BR3 MNR04 33 BR1 MNR04 33 5 6 BR20 7 MNR04 8 5 6 BR22 7 MNR04 8 5 6 BR24 7 MNR04 8 5 6 BR26 7 MNR04 8 5 6 BR28 7 MNR04 8 5 6 BR30 7 MNR04 8 33 33 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 10K R547 R58 R59 4 3 2 1 R55 R51 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 R46 R48 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 TP165 TP166 TP167 TP169 TP171 TP173 TP176 TP81 TP85 TP91 TP94 TP98 TP100 TP104 TP107 TP109 TP112 TP114 TP117 TP120 TP124 TP127 TP131 TP134 TP136 TP139 TP142 TP145 TP148 TP151 TP154 TP156 TP159 TP3 TP7 TP9 TP11 TP13 TP16 TP19 TP22 TP25 TP27 TP29 TP32 TP34 TP36 TP38 TP40 TP42 TP44 TP46 TP48 TP51 TP53 TP56 TP58 TP60 TP62 TP64 TP67 TP71 TP74 TP77 TP79 162 123 122 121 88 89 90 93 87 53 54 55 56 58 60 61 62 63 64 65 66 67 68 70 72 73 74 75 76 77 78 80 82 84 86 13 14 15 16 17 18 20 22 23 24 25 26 28 30 31 32 34 36 37 38 39 40 41 42 43 44 46 48 49 50 51 52 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 D31 D30 D29 D28 D27 D26 D25 D24 D23 D22 D21 D20 D19 D18 D17 D16 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 3 TP233 TP235 TP237 TP229 TP216 TP218 TP220 TP212 TP213 TP205 TP206 TP207 TP208 TP209 TP210 TP211 TP203 TP204 TP200 TP201 TP202 TP196 TP197 TP198 TP199 TP195 TP190 TP179 TP181 TP183 TP185 TP187 TP189 TP168 TP170 TP172 TP174 TP177 +3.3V TP162 TP164 TP82 TP86 TP92 TP95 TP99 TP101 TP105 TP108 TP110 TP113 TP115 TP118 TP121 TP125 TP128 TP132 TP135 TP137 TP140 TP143 TP146 TP149 TP152 TP155 TP157 TP160 TP4 TP8 TP10 TP12 TP14 TP17 TP20 TP23 TP26 TP28 TP30 TP33 TP35 TP37 TP39 TP41 TP43 TP45 TP47 TP49 TP52 TP54 TP57 TP59 TP61 TP63 TP65 TP68 TP72 TP75 TP78 TP80 3 IR Q2IR Q1IR Q0- DR EQ[0]DR EQ[1]DRAK[0] DRAK[1] CS0CS2CS3CS4CS5CS6- R DWE0WE1RD/W RBS- TUIKA1 W AIT- C_BT VOLCNT[B] VOLCNT[A] VOL[C] VOL[B] VOL[A] CION 150VONRTC_CE S EC CML SPMUTE HNDMUTE- CPU_CKIO 0 GND 1 TP803 EXHS- LIUID HS1 RHS 10K R47 +3.3V R18 R30 11 13 15 17 GND VCC 2Y1 2Y2 2Y3 2Y4 1Y4 1Y3 1Y2 1Y1 FB6 MEM2012(NM) 47 TC74LCX244FT 2A1 2A2 2A3 2A4 2G 1A4 1A3 1A2 1A1 1G IC2 10 20 9 7 5 3 12 14 16 18 +3.3V TP129 GND C1 F0.1u/16 TP83 TP87 TP93 TP69 TP66 TP73 +3.3V BR39 MNR04 10K 2 100 CASLRAS3LCKE GND C29 B1000p/50 R60 TP70 R(NM) GND 1 CKIO_GA2 CKIO_GA1 IRQ2IRQ1IRQ0- DREQ[0]DREQ[1]DRAK[0] DRAK[1] CS0CS2CS3CS4CS5CS6- R DWE0WE1RD/W RBS- WAIT- FB2 MEM2012(NM) GND 33 HS2- TP50 FB1 MEM2012(NM) 33 CKIO_S 1/10 TP84 1 FB3 MEM2012(NM) 33 GND R415 R8 R7 R13 A[1:25] D[0:15] D[16:31] GND BR32 BR33 BR34 BR35 BR36 MNR04 10KMNR04 10KMNR04 10KMNR04 10KMNR04 10K GND TP96 19 8 6 4 2 1 TP55 2 8 7 6 5 1 2 3 4 4 8 7 6 5 1 2 3 4 8 7 6 5 AR-FX11 ELECTRICAL SECTION 9-2 1 2 3 4 5 8 7 6 5 1 2 3 4 6 6 5 8 7 3 4 1 2 7 8 7 6 5 1 2 3 4 8 A B C D [09]ELECTRICALSECTION.fm 2 ページ 2004年11月12日 金曜日 午後2時25分 2. FAX Circuit diagram A B C D FRESET 8 C42 C(NM) GND 9 16 17 48 1 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 10 C43 F0.1u/16 ROMRP- GND GND GND 4 2 GND GND VPP VCC RY/BY BYTE DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 27 46 12 SKHU(NM) SW2 R409 TP249 GND +3.3V TP261 TP248 R109 TP253 IC7 33 7 RES OUT GND + 5 R104 10K R100 33 2 1 GND 1 TP247 R86 10K +3.3V TP804 GND C34 A33u/10 TP802ROMPOEROMPWE1 ROMPWP- ROMPRY +3.3V IC29C TC74LCX14FT 6 PST591IMT GND +3.3V 4 3 VCC C41 F0.1u/16 33 R77 10K R75 1K +3.3V C36 F0.1u/16 C37 F0.1u/16 TP240 15 47 13 37 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 45 43 41 39 36 34 32 30 44 42 40 38 35 33 31 29 IC32A TC74LCX05FT IC32B TC74LCX05FT 3 1 +3.3V GND 1 TP809 IC32F TC74LCX05FT 13 GND TP260 CE RP OE WE WP NC A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 IC5 MBM29LV160B-90PFTN-SFKE1(NM) 26 12 28 11 14 TP242 10 A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 R548 33 IC29E TC74LCX14FT 11 +3.3V 33 R98 10K R(NM) R83 0 R82 R79 MANRES- RAMCE2 RES- ROMRP- ROMPOEROMPWEROMPWP- ROMPCE- +3.3V R76 10K A[1:25] D[0:15] GND TP244 2 CE RP OE WE WP NC DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 GND GND VPP VCC RY/BY BYTE R101 2.2K 3 27 46 13 37 15 47 45 43 41 39 36 34 32 30 44 42 40 38 35 33 31 29 6 GND +3.3V B GND 13 R105 5.6K TP254 4 IC29F TC74LCX14FT 12 GND R103 1K TP252 B R87 33 Q3 KTC3875S Y-RTK/P TP251 R102 10K R78 10K C38 F0.1u/16 C39 F0.1u/16 TP241 D31 D30 D29 D28 D27 D26 D25 D24 D23 D22 D21 D20 D19 D18 D17 D16 TP246 IC29B TC74LCX14FT UDZ TE-17 2.0B ZD1 TP250 TP245 C194 F0.1u/16 1SS355TE-17 D2 IC6 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 MBM29LV160B-90PFTN-SFKE1(NM) IC29A TC74LCX14FT B2200p/50 C50 1 9 16 17 48 1 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 26 12 28 11 14 TP243 10 A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 R106 470(2012) TP255 5 RAMCE2 Q2 KTA1504S-Y-RTK/P RES- GND 1 GND TP806 1 TP805 C35 A33u/10 +3.3V GND + ROMPRY +3.3V ROMNOEROMNWEROMNWP- ROMNCE- 26 12 28 11 14 10 9 16 17 48 1 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 CE RP OE WE WP NC A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 GND GND VPP VCC RY/BY BYTE DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 27 46 13 37 15 47 45 43 41 39 36 34 32 30 44 42 40 38 35 33 31 29 +3.3V SW5-6 SW3-4 SW1-2 ROMOCID1 ROMORY +3.3V ROMOCE- ROMBANK1 8 R80 33 5 GND GND 4 SW1 RE-H062SD-1110 :Jumper :NO Jumper 10K 9 13 12 10 + 8 GND 1 IC37D TC74LCX32FT 11 R84 33 R81 33 GND TP808 1 TP807 IC37C TC74LCX32FT BR56 MNR04 10K +3.3V C44 A33u/10 SRAM Clear +3.3V ROMNRY C31 A33u/10 R73 1K GND C32 C33 F0.1u/16 F0.1u/16 R74 TP238 C67 F0.1u/16 +3.3V D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 TC74LCX05FT IC32C 6 Operation SRAMCLR- ROMOCID0 ROMOOEROMOWPROMOWEROMOCD0 ROMOCD1 +3.3V IC29D TC74LCX14FT 9 MBM29LV160B-90PFTN-SFKE1 ROMBANK0 TP239 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 IC4 10K R90 1K R85 4 10K R91 D[16:31] 5 10K R92 FAX MAIN PWB(FLASH) 14 7 10K R93 14 7 6 C E E C 8 7 6 5 1 2 3 4 7 14 7 10K R99 AR-FX11 ELECTRICAL SECTION 9-3 6 5 4 3 2 1 10K 10K R422 R423 8 3 + 3 R88 R94 33 GND MNR04 33 10K BR42 1 8 MNR04 33 2 7 3 6 BR44 4 5 1 8 2 7 MNR04 33 3 6 BR46 4 5 1 8 MNR04 33 2 7 3 6 BR48 4 5 1 8 2 7 MNR04 33 3 6 BR50 4 5 1 8 MNR04 33 2 7 3 6 BR52 4 5 1 8 2 7 MNR04 33 3 6 BR54 4 5 1 8 MNR04 33 2 7 3 6 4 5 C46 C47 F0.1u/16 F0.1u/16 +3.3V D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 BR40 1 8 2 7 3 6 4 5 CN3 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15/A-1 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 RP RY/BY BYTE VPP 1CE D15/A-1 2CE NC OE WP WE NC VCC GND VCC GND GND GND NC ROMRPROMPRY +3.3V 10K + R89 R96 33 GND MNR04 33 10K C48 C49 F0.1u/16 F0.1u/16 +3.3V 1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15/A-1 D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 RP RY/BY BYTE VPP 1CE D15/A-1 2CE NC OE WP WE NC VCC GND VCC GND GND GND NC C N4 GND TP813 1 TP812 DIM2-SD72AR-1131- F 1 C45 A33u/10 +3.3V 33 GND R97 R95 13 14 15 16 17 18 28 31 32 29 33 34 36 65 66 67 68 69 70 71 41 2 3 4 5 6 7 8 9 21 22 23 24 25 26 27 35 37 38 49 50 51 52 53 54 56 57 58 60 59 62 63 64 19 45 48 55 40 12 42 43 44 46 47 11 10 30 61 1 20 39 72 2/10 GND 2 ROMPOEROMPWPROMPWE- ROMPCE- D16 D17 D18 D19 D20 D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 D31 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 BR41 A22 MNR04 33 4 5 3 6 2 7 BR43 1 8 4 5 3 6 2 7 BR45 1 8 4 5 3 6 MNR04 33 2 7 BR47 1 8 4 5 MNR04 33 3 6 2 7 BR49 1 8 4 5 3 6 MNR04 33 2 7 BR51 1 8 4 5 MNR04 33 3 6 2 7 BR53 1 8 4 5 3 6 MNR04 33 2 7 BR55 1 8 4 5 MNR04 33 3 6 2 7 1 8 1 1 GND TP811 1 TP810 DIM2-SD72AR-1131-F 13 14 15 16 17 18 28 31 32 29 33 34 36 65 66 67 68 69 70 71 41 2 3 4 5 6 7 8 9 21 22 23 24 25 26 27 35 37 38 49 50 51 52 53 54 56 57 58 60 59 62 63 64 19 45 48 55 40 12 42 43 44 46 47 11 10 30 61 1 20 39 72 2 A B C D [09]ELECTRICALSECTION.fm 3 ページ 2004年11月12日 金曜日 午後2時25分 A B GND +3.3V 8 5 4 2 1 RAMCE2 RAMCERAMOERAMWERAMUBRAMLB- IC37B TC74LCX32FT 6 IC37A TC74LCX32FT 3 GND R116 R(NM) GND R129 TP279 33 GND C68 C150p/50 R117 TP271 33 C71 C150p/50 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 7 30 6 32 5 9 10 7 11 4 12 1 31 2 3 13 14 15 16 17 18 19 20 30 6 32 5 9 10 7 11 4 12 1 31 2 3 13 14 15 16 17 18 19 20 IC11 VSS VCC I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0 24 8 29 28 27 26 25 23 22 21 VSS VCC I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0 24 8 29 28 27 26 25 23 22 21 IS62WV2568BLL-55TLI CE1 CE2 OE WE NC/A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 IC12 IS62WV2568BLL-55TLI CE1 CE2 OE WE NC/A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 D15 D14 D13 D12 D11 D10 D9 D8 F0.1u/16 C70 F0.1u/16 C63 CKIO_SDRAM CS3RAS3LCASLRD/W RWE0WE1CKE 36 40 1 1 GND 1 1 6 GND GND TP817 VSS VSS VSS VSSQ VSSQ VSSQ VSSQ VDD VDD VDD VDDQ VDDQ VDDQ VDDQ DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 28 41 54 6 12 46 52 1 14 27 3 9 43 49 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2 MT48LC4M16A2TG-75 NC NC CLK CS RAS CAS WE LDQM UDQM CKE GND TP815 TP816 GND IC8 BA1 BA0 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 TP814 + C64 A47u/16 VBT3.3 TP267 TP269 38 19 18 17 16 15 39 37 21 20 35 22 34 33 32 31 30 29 26 25 24 23 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 F0.1u/16 C57 C A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 F0.1u/16 C58 A[1:25] F0.1u/16 C345 D[0:15] CS3RAS3LCASLRD/W RDQMUL DQMUU CKE 5 C69 F1u/10(1608)(NM) TP274 D5 1SS355(NM) D4 1SS355(NM) GND GND R121 560 B +3.3V TP268 TP270 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 R120 360 CKIO_SDRAM + +3.3V F0.1u/16 D[16:31] A10u/16 C59 C346 IC9 VSS VSS VSS VSSQ VSSQ VSSQ VSSQ VDD VDD VDD VDDQ VDDQ VDDQ VDDQ DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 DQ0 28 41 54 6 12 46 52 1 14 27 3 9 43 49 53 51 50 48 47 45 44 42 13 11 10 8 7 5 4 2 R119 1K 4 D8 RLS-73(NM) Q6 MMBTA56-RTK/P VBT3.3 +3.3V R122 20K D31 D30 D29 D28 D27 D26 D25 D24 D23 D22 D21 D20 D19 D18 D17 D16 TP273 D6 1SS355(NM) Q7 KTC3875S Y-RTK/P TP272 R118 0 MT48LC4M16A2TG-75 NC NC CLK CS RAS CAS WE LDQM UDQM CKE BA1 BA0 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 ZD3 UDZ TE-17 2.0B 36 40 38 19 18 17 16 15 39 37 21 20 35 22 34 33 32 31 30 29 26 25 24 23 RTC_CE F0.1u/16 C60 D F0.1u/16 C61 4 F0.1u/16 C347 GND + +3.3V 1 1 GND +3.3V Battery Cover BT2 HL50-A 1SS355(NM) R127 0 D10 BT4 D9 1SS355TE-17 R512 10K TP819 GND +3.3V GND R419 R(NM) TP818 GND 10 IC32E TC74LCX05FT 11 R418 R(NM) RB751V-40(NM) D7 RTC_DIR C62 A10u/16 RTC_CLK RTC_DATA GND R417 3.3K 5 C_BT 3 GND TP280 TP278 R(NM) R115 GND 0 C_BT R130 R126 82K Q8 DTC363EKA T146 B C TP281 BT1 CR2477-H01Y(NM) 1.6K R128 1.6K R125 GND IC10 2 2 B VSS XT XT- VDD GND GND 14 12 7 3 8 GND GND R123 0 4 2 1 NC OUT C53 A47u/16 C52 C(NM) 3 1 TP276 R124 0 C8p/50 GND C56 L_BT- X2 DMX-38 32.768KHz C55 1 4 3 R421 C8p/50 1 2 C(NM) C51 R114 470(2012) TP266 33 3/10 Q4 KTA1504S-Y-RTK/P +3.3V PST3426 GND VCC + B IC13 GND 1 TP820 C54 F0.1u/16 IC49D 74LCX125MTCX(NM) 11 4 2 TP264 VBT3.3 R112 1K Q5 KTC3875S Y-RTK/P TP263 R111 10K SM8578BV-G I/O- CE CLK DATA C320 F0.1u/16 JP3 SD00415-52(NM) GND 5 IC49C 74LCX125MTCX(NM) 1 6 R(NM) 7 33 +3.3V R113 5.6K TP265 R420 1 R110 2.2K UDZ TE-17 2.0B ZD2 TP262 2 R515 8 IC49B 74LCX125MTCX(NM) 5 + C66 A10u/16 GND 33 IC49A 74LCX125MTCX(NM) 3 D3 1SS355TE-17 R514 C274 F0.1u/16 GND +3.3V 9 6 2 TP277 GND + 8 IC32D TC74LCX05FT 9 +3.3V +5V BT3 CR2450 2 1 TP275 C65 A10u/16 R416 10K +3.3V TC74LCX14FT 6 IC31C R517 33 3 C E FAX MAIN PWB(SRAM) 5 C E F0.1u/16 C348 1 4 10 6 3 1 2 1 2 AR-FX11 ELECTRICAL SECTION 9-4 E 7 13 E C 8 A B C D [09]ELECTRICALSECTION.fm 4 ページ 2004年11月12日 金曜日 午後2時25分 A B C 2 1 27 26 +24V and +5V are OFF in power save +5VEN and +3.3V always ON 8 GND GND GND GND GND GND GND GND GDATA0 GDATA1 GDATA2 GDATA3 GDATA4 GDATA5 GDATA6 GDATA7 GDATA8 GDATA9 GDATA10 GDATA11 GDATA12 GDATA13 GDATA14 GDATA15 FAXDET- FAXCMD FAXSRDY- FAXREQ1P- FAXCS0PFAXACK0P- FAXPAGEFAXPRD- FAXSTS FAXCRDY- FAXCS1PFAXACK1P- FAXREQ0P- HSYNCPRLINE- RESETPWOFFREADY- +3.3V +3.3V +3.3V +3.3V +5VEN +5V 3 4 29 2 19 25 26 27 30 46 50 40 41 38 39 14 36 37 12 34 35 10 32 33 8 6 31 1 11 9 GND 100 100 R156 R157 13 5 TP309 33 33 R154 R155 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 33 R153 44 42 43 GND 33 33 R151 R152 7 28 100 100 33 R148 R149 R150 7 BR64 MNR04 33 BR63 MNR04 33 BR62 MNR04 33 BR61 MNR04 33 0(3216) R135 0 0(3216) R134 48 16 R158 0(3216)(NM) R133 45 18 20 21 22 23 24 15 17 GND GND GND C79 F0.1u/16 C77 F0.1u/16 C75 F0.1u/16 GND GND GND GND GND GND GND TP284 + C80 A33u/10 GND + C78 A33u/10 GND + C76 A33u/10 GND + C74 A10u/35 C84 C73 F0.01u/50 GND +3 GND +5V .3V GND C85 D C72 F0.01u/50 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND R165 R166 R164 R162 R163 R159 R161 5 100 33 0 0 0 0 0 FB9 MEM2012(NM) GND GND GND GND GND 2 6 IC36A TC74LCX14FT GND 100 100 TP289 TP286 TP283 4 TP290 TP291 TP292 TP293 TP294 TP295 TP296 TP297 TP298 TP299 TP301 TP302 TP303 TP304 TP305 TP306 8 R147 R136 1G 2G 1A1 1A2 1A3 1A4 2A1 2A2 2A3 2A4 TC74LCX244FT GND VCC 1Y1 1Y2 1Y3 1Y4 2Y1 2Y2 2Y3 2Y4 IC45 TP287 1 19 2 4 6 8 11 13 15 17 GND R160 IC36E TC74LCX14FT 10 IC36D TC74LCX14FT GDATA0 GDATA1 GDATA2 GDATA3 GDATA4 GDATA5 GDATA6 GDATA7 GDATA8 GDATA9 GDATA10 GDATA11 GDATA12 GDATA13 GDATA14 GDATA15 10 20 18 16 14 12 9 7 5 3 11 9 GND C98 F0.1u/16 +3.3V TP867 TP868 TP869 TP300 R528 R529 IC36F TC74LCX14FT 12 IC36C TC74LCX14FT +3.3V +3.3V 13 5 TP285 C40 F0.1u/16 1 TP282 BR57 BR58 BR59 BR60 MNR04 10KMNR04 10KMNR04 10KMNR04 10K +3.3V GND C332 33 33 33 1 +3.3V TP821 GND TP288 3 +3.3V GDATA[0:15] FAXCMD FAXSRDY- FAXSTS FAXCRDY- FAXREQ1P- FAXCS0PFAXACK0P- FAXPAGEFAXPRD- FAXCS1PFAXACK1P- FAXREQ0P- PRLINE- READY- H SYNC- PWOFF- FRESET 0 R171 C100 F0.1u/16 0 R170 TP307 3 D11 GND GND OUT2 C101 F0.1u/16 4 4 IC36B TC74LCX14FT 1SS355TE-17 3 IC14 LM1117MPX-1.8/NOPB IN OUT1 2 2 TP308 + C99 A33u/10 +1.8V 1 4/10 GND R428 22 GND R427 22 GND R445 22 GND R425 22 GND R429 22 GND 6 GND R459 22 GND R463 22 GND R462 22 GND R461 22 GND R460 22 GND R520 22 R468 22 5 GND R467 22 GND R521 22 GND R433 22 GND R432 22 GND R440 22 GND R430 22 C310 C311 C312 C313 C314 C339 C340 C318 C319 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 GND R424 22 GND R434 22 GND R439 22 4 GND R438 22 GND R437 22 GND R436 22 GND R435 22 GND R443 22 GND R442 22 GND R441 22 GND R431 22 GND R444 22 3 GND R449 22 GND R447 22 GND R446 22 GND R426 22 GND R450 22 2 GND R454 22 GND R453 22 GND R452 22 GND R451 22 GND R455 22 GND R519 22 GND R518 22 GND R457 22 GND R456 22 GND R522 22 1 R464 22 GND R525 22 GND R524 22 C275 C276 C277 C278 C279 C280 C281 C282 C283 C284 C285 C286 C287 C288 C289 C290 C291 C292 C293 C294 C295 C296 C297 C298 C300 C301 C302 C303 C304 C305 C306 C307 C308 C337 C338 C341 C343 C344 C315 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 GND GND +3.3V +5VS +5V +24V 10K 0(3216) 10K 0(3216) 10K R132 10K R131 HOLE H1 10K 47 49 HOLE H2 10K +24V +24V HOLE H3 10K C N5 TX25-50P-23ST-H1E HOLE H4 10K FAX MAIN PWB(MCU I/F) C82 HOLE B1000p/50 C100p/50 C100p/50 C93 C323 C83 H5 C100p/50 C100p/50 C94 C324 C100p/50 C100p/50 C100p/50 C95 C325 C100p/50 C100p/50 C100p/50 C86 C96 C326 C100p/50 B1000p/50 C100p/50 C87 C97 10K C328 R137 C100p/50 C100p/50 C100p/50 R139 C88 R140 C100p/50 C100p/50 R141 C89 C329 10K C330 R142 B1000p/50 C100p/50 R143 C90 R144 B1000p/50 C100p/50 R145 C331 R146 C100p/50 14 7 6 C100p/50 C91 C321 HOLE GND 7 C100p/50 10K R167 B1000p/50 C100p/50 C100p/50 H6 C336 10K R168 R138 C327 5 6 7 8 4 3 2 1 C333 5 6 7 8 C334 4 3 2 1 C100p/50 5 6 7 8 C335 4 3 2 1 C100p/50 5 6 7 8 4 3 2 1 C100p/50 C92 C322 HOLE H7 AR-FX11 ELECTRICAL SECTION 9-5 1 8 A B C D [09]ELECTRICALSECTION.fm 5 ページ 2004年11月12日 金曜日 午後2時25分 A B C D +3.3V 8 0 0 R174 R175 TP310 GND FB10 MEM2012(NM) 0 0 R173 R172 3.3VGA1 C127 F0.1u/16 3.3VGA1 GND GND GND GND GND G2D[0:7] 7 G1REQG1ACKG2REQG2ACK- GND 3.3VGA1 C117 F0.1u/16 3.3VGA1 G1D[0:7] C125 F0.1u/16 3.3VGA1 C124 F0.1u/16 3.3VGA1 C122 F0.1u/16 3.3VGA1 + C114 A33u/10 GND G1D0 G1D1 G1D2 G1D3 G1D4 G1D5 G1D6 G1D7 G2D0 G2D1 G2D2 G2D3 G2D4 G2D5 G2D6 G2D7 R185 GND GND R192 33 MDMIRQ MDMRES- R194 33 BR80 MNR04 33 1 8 2 7 3 6 BR82 4 5MNR04 33 1 8 2 7 3 6 4 5 4.7K 1K R511 BZ 1K R510 GND 1 TP823 GND TP436 TP438 TP440 TP442 TP444 TP446 TP447 TP449 TP451 TP453 TP455 TP457 TP459 TP461 TP463 TP465 TP430 TP432 TP434 TP435 TP421 TP423 TP425 TP426 TP412 TP414 TP416 TP418 TP406 TP407 TP408 TP409 TP410 TP387 TP389 TP391 TP393 TP395 TP396 TP397 TP399 TP401 TP403 TP359 TP361 TP363 TP365 TP367 TP368 TP369 TP371 TP373 TP375 TP377 TP378 TP379 TP381 TP383 TP385 GND GND GND 6 C128 F0.1u/16 GND GND GND GND GND GND GND GND GND GND 3.3VGA1 C113 F0.1u/16 3.3VGA1 C112 F0.1u/16 3.3VGA1 C111 F0.1u/16 3.3VGA1 C110 F0.1u/16 3.3VGA1 C109 F0.1u/16 3.3VGA1 C108 F0.1u/16 3.3VGA1 C107 F0.1u/16 3.3VGA1 3 C106 F0.1u/16 3.3VGA1 BR65 MNR04 33 C D1D15 1 8 C D1D14 2 7 C D1D13 3 6 C D1D12 4 5 TP311 TP312 TP313 TP314 C105 F0.1u/16 BR66 MNR04 33 C D1D11 1 8 C D1D10 2 7 CD 1D9 3 6 CD 1D8 4 5 TP315 TP316 TP317 TP318 GND-1 GND-2 VORES_N VOSD VOSI VOST_N VOCH_N VOBUSY_N VONAR NC TCK TDI TRST TDO RTCDT RTCCK RTCCE RTCIO VDD-19 GND-20 RTC245DIR RTC245OE_N BZ BT MDMRES_N MDMCS_N MDMRD_N MDMWR_N MDMIRQ TMS GND-31 MDMA[0] MDMA[1] MDMA[2] MDMA[3] MDMA[4] VDD-37 VDD-38 GND-39 GND-40 MDMD[0] MDMD[1] MDMD[2] MDMD[3] VDD-45 GND-46 MDMD[4] MDMD[5] MDMD[6] MDMD[7] VDD-51 GND-52 G1REQ_N G1ACK_N G2REQ_N G2ACK_N VDD-57 GND-58 G1D[0] G1D[1] G1D[2] G1D[3] G1D[4] G1D[5] G1D[6] G1D[7] G2D[0] G2D[1] G2D[2] G2D[3] G2D[4] G2D[5] G2D[6] G2D[7] GND-75 GND-76 3.3VGA1 A[1:25] GND 1 TP824 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 CD1A[0:3] CD1D[0:15] 3.3VGA1 BR67 MNR04 33 CD 1D7 1 8 CD 1D6 2 7 CD 1D5 3 6 CD 1D4 4 5 TP319 TP320 TP321 TP322 C104 F0.1u/16 3.3VGA1 BR68 MNR04 33 CD 1D3 1 8 CD 1D2 2 7 CD 1D1 3 6 CD 1D0 4 5 TP323 TP324 TP325 TP326 C103 F0.1u/16 R549 33 TP342 4 3 2 1 3.3VGA1 M1D15 M1D14 M1D13 M1D12 5 6 7 8 TP343 TP344 TP345 TP346 C102 F0.1u/16 33 M1D11 M1D10 M1D9 M1D8 BR70 MNR04 5 4 6 3 7 2 8 1 TP347 TP348 TP349 TP350 FAX MAIN PWB(GA1) 4 BR73 MNR04 33 5 IC15 uPD65948GL-114-NMU-A GND 5 C133 F0.1u/16 3.3VGA1 GND CKIO_GA1 6 CD1ACKD0CD1ACKC0CD1REQD0 CD1REQC0 33 33 TP327 R176 TP328 R177 TP329 TP330 CD1UBECD1WRCD1RDCD1CS33 33 33 33 TP331 R178 TP332 R179 TP333 R180 TP334 R181 CS0CS4CS6BSRD /WRR DWE0WE1R197 R198 DRAK[0] DRAK[1] WAITDREQ[0]DREQ[1]- R199 R200 R201 R205 0 R204 0 IRQ0IRQ1MD3 7 33 M1D7 M1D6 M1D5 M1D4 BR71 MNR04 5 4 6 3 7 2 8 1 TP351 TP352 TP353 TP354 CD1IRQCD1CLK TP341 TP339 TP340 33 CD1A3 CD1A2 CD1A1 CD1A0 BR69 MNR04 1 8 2 7 3 6 4 5 TP335 TP336 TP337 TP338 CD1RES- 33 M1D3 M1D2 M1D1 M1D0 BR72 MNR04 5 4 6 3 7 2 8 1 TP355 TP356 TP357 TP358 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 288 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 265 264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 GND 4 C129 F0.1u/16 3.3VGA1 GND C130 F0.1u/16 3.3VGA1 GND C131 F0.1u/16 3.3VGA1 GND 3 C132 F0.1u/16 3.3VGA1 GND D[0:15] 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 M1D[0:15] GND-228 GND-227 MA[15] MA[14] MA[13] MA[12] GND-222 VDD-221 MA[11] MA[10] MA[9] MA[8] GND-216 VDD-215 MA[7] MA[6] MA[5] MA[4] GND-210 VDD-209 MA[3] MA[2] MA[1] MA[0] GND-204 VDD-203 MUB_N MLB_N MWE_N MOE_N MCE_N GND-197 VDD-196 RES_N CPURES_N MANRES_N GND-192 GND-191 VDD-190 VDD-189 RAMUB_N RAMLB_N RAMWE_N RAMOE_N RAMCE_N GND-183 BFDIR BFOE_N GND-180 ROMOCID[1] ROMOCID[0] ROMOCD[1] ROMOCD[0] ROMBNK[2] ROMBNK[1] ROMBNK[0] GND-172 VDD-171 ROMRY ROMOWP_N ROMOWE_N ROMOOE_N ROMOCE_N GND-165 ROMNRY ROMNWP_N ROMNWE_N ROMNOE_N ROMNCE_N ROMPRY ROMWP_N ROMPWE_N ROMPOE_N ROMPCE_N GND-154 GND-153 VDD-304 VDD-303 CDD[15] CDD[14] CDD[13] CDD[12] GND-298 VDD-297 CDD[11] CDD[10] CDD[9] CDD[8] GND-292 VDD-291 CDD[7] CDD[6] CDD[5] CDD[4] GND-286 GND-285 CDD[3] CDD[2] CDD[1] CDD[0] GND-280 VDD-279 CDACKD_N CDACKC_N CDREQD CDREQC GND-274 VDD-273 CDUBE_N CDWR_N CDRD_N CDCS_N GND-268 GND-267 VDD-266 VDD-265 CDA[3] CDA[2] CDA[1] CDA[0] GND-260 VDD-259 CDIRQ CDCLK CDRES_N TRES_N GND-254 VDD-253 MD[15] MD[14] MD[13] MD[12] GND-248 GND-247 MD[11] MD[10] MD[9] MD[8] GND-242 VDD-241 MD[7] MD[6] MD[5] MD[4] GND-236 VDD-235 MD[3] MD[2] MD[1] MD[0] VDD-230 VDD-229 VDD-77 VDD-78 A[1] A[2] A[3] A[4] A[5] A[6] A[7] A[8] A[9] A[10] A[11] A[12] A[13] A[14] A[15] A[16] GND-95 GND-96 A[20] A[21] A[22] CS0_N CS4_N CS6_N BS_N RW (RD/WR-) RD_N WE0_N WE1_N DREQ[0]_N DREQ[1]_N DRAK[0]_N DRAK[1]_N WAIT_N VDD-113 VDD-114 GND-115 GND-116 CLK BSSEL[0] BSSEL[1] IRQ[0]_N IRQ[1]_N MODE3 GND-123 D[0] D[1] VDD-126 GND-127 D[2] D[3] GND-130 D[4] D[5] GND-133 GND-134 D[6] D[7] VDD-137 GND-138 D[8] D[9] GND-141 D[10] D[11] VDD-144 GND-145 D[12] D[13] GND-148 D[14] D[15] VDD-151 VDD-152 77 78 A1 79 A2 80 A3 81 A4 82 A5 83 A6 84 A7 85 A8 86 A9 87 A10 88 A11 89 A12 90 A13 91 A14 92 A15 93 A16 94 95 96 A20 97 A21 98 A22 99 100 101 102 103 104 105 106 107 33 TP468 108 33 109 TP469 110 TP470 111 R196 TP467 112 33 113 114 115 116 117 TP473 118 TP471 119 33 120 33 TP472 121 33 122 123 D0 124 D1 125 126 127 D2 128 D3 129 130 D4 131 D5 132 133 134 D6 135 D7 136 137 138 D8 139 D9 140 141 D10 142 D11 143 144 145 D12 146 D13 147 148 149 150 151 152 AR-FX11 ELECTRICAL SECTION 9-6 D14 D15 8 GND GND 1 TP825 TP448 TP450 TP452 TP454 TP456 TP458 TP460 TP462 TP464 TP466 TP437 TP439 TP441 TP443 TP445 33 33 R191 33 2 ROMNRY ROMNWPROMNWEROMNOEROMNCEROMPRY ROMPWPROMPWEROMPOEROMPCE- 3.3VGA1 ROMORY ROMOWPROMOWEROMOOEROMOCE- F0.1u/16 C126 3.3VGA1 RAMUBRAMLBRAMWERAMOERAMCE- F0.1u/16 C123 3.3VGA1 F0.1u/16 C120 3.3VGA1 F0.1u/16 C119 3.3VGA1 F0.1u/16 C118 3.3VGA1 F0.1u/16 C116 3.3VGA1 F0.1u/16 C115 M1A[0:15] CPURESMANRES- ROMOCID1 ROMOCID0 ROMOCD1 ROMOCD0 BR79 MNR04 62 1 8 2 7 3 6 4 5 R189 R190 M1UBM1LBM1WEM1OEM1CE- ROMBANK1 ROMBANK0 BR81 MNR04 33 1 8 2 7 3 6 BR83 4 5 MNR04 33 1 8 2 7 BR84 3 6 MNR04 33 4 5 1 8 2 7 BR85 3 6 4 5 MNR04 33 1 8 2 7 3 6 4 5 TP427 TP428 TP429 TP431 TP433 R193 33 R195 33 TP422 TP424 TP413 TP415 TP417 TP419 TP420 TP411 33 33 33 33 33 R182 R183 R184 R186 R187 TP398 TP400 TP402 TP404 TP405 M1A7 M1A6 M1A5 M1A4 M1A11 M1A10 M1A9 M1A8 M1A3 M1A2 M1A1 M1A0 M1A15 M1A14 M1A13 M1A12 BR74 MNR04 33 TP360 1 8 TP362 2 7 TP364 3 6 TP366 4 5 BR76 MNR04 33 TP370 1 8 TP372 2 7 TP374 3 6 TP376 4 5 BR77 MNR04 33 TP380 1 8 TP382 2 7 TP384 3 6 TP386 4 5 BR78 MNR04 33 TP388 1 8 TP390 2 7 TP392 3 6 TP394 4 5 2 GND GND GND GND GND GND GND GND 100 C121 C100p/50 R188 GND 1 TP826 RES- 1 1 5/10 A B C D [09]ELECTRICALSECTION.fm 6 ページ 2004年11月12日 金曜日 午後2時25分 A B C D +3.3V CD2WR- CD1WR- CD2RD- CD1RD- CD1D[0:15] CD1A[0:3] 8 GND GND 10 9 13 12 +3.3V GND 3 IC35C TC74LCX08FT 8 IC35D TC74LCX08FT 11 X3 VDD OE OUT GND 2 3 GND F0.1u/16 F0.1u/16 7 GND 1 GND TP830 1 GND TP829 1 GND TP828 1 TP827 C139 GND TP519 F0.1u/16 C140 CD1CLK CD1ACKD0- CD1ACKC0- CD1REQD0 CD1REQC0 CD1IRQCD2IRQ1 CD1RES- CD1CS- 33 F0.1u/16 C141 F0.1u/16 C142 R224 R(NM) R227 33 TP520 CD2REQD0 CD2REQC0 R210 33 F0.1u/16 C143 GND R222 0 R550 6 F0.1u/16 C144 GND TP511 TP509 TP504 TP506 32 33 34 35 3 4 5 1 F0.1u/16 C147 F0.1u/16 C151 F0.1u/16 C146 121 118 115 124 114 103 92 81 66 55 37 25 11 9 24 36 54 65 80 91 102 113 123 125 126 127 128 38 39 TP514 40 41 R225 R(NM) TP517 6 TP523 10 + C148 A33u/10 +3.3V F0.1u/16 C145 GND FB12 TP521 MEM2012(NM) CD2ACKD0+3.3V CD2ACKC0- R211 1K R208 1K 31 7 8 30 2 12 13 14 15 16 17 18 19 20 21 22 23 26 27 28 29 C D1D15 C D1D14 C D1D13 C D1D12 C D1D11 C D1D10 CD 1D9 CD 1D8 CD 1D7 CD 1D6 CD 1D5 CD 1D4 CD 1D3 CD 1D2 CD 1D1 CD 1D0 CD1UBE- 42 43 44 45 C138 C137F0.1u/16 +3.3V C228 F0.1u/16 GND 4 1 R209 62 R206 62 SG-8002JC 16M PCC-L2 R226 R(NM) IC35B TC74LCX08FT 6 IC35A TC74LCX08FT FB11 MEM2012(NM) GND R221 0 5 4 2 1 +3.3V CD1A3 CD1A2 CD1A1 CD1A0 8 7 6 5 1 2 3 4 BR86 BR87 BR88 BR89 MNR04 (NM) MNR04 (NM) MNR04 (NM) MNR04 (NM) 6 8 7 6 5 1 2 3 4 7 8 7 6 5 1 2 3 4 FAX MAIN PWB(GA1-CODEC) 14 AR-FX11 ELECTRICAL SECTION 9-7 7 8 7 6 5 1 2 3 4 8 AVSS AVDD VREF5 VSS10 VSS9 VSS8 VSS7 VSS6 VSS5 VSS4 VSS3 VSS2 VSS1 VDD1 VDD2 VDD3 VDD4 VDD5 VDD6 VDD7 VDD8 VDD9 VDD10 TEST3 TEST2 TEST1 TEST0 CLKIN CLKOUT ACKC0ACKC1ACKD0ACKD1- REQC0 REQC1 REQD0 REQD1 INTR0 INTR1 INTR2 RESET- UBERDWRCSHEX- D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 A3 A2 A1 A0 IC16 5 5 MN86065 VCOI PCO SCANEN MINTEST MINTIN MINTC NC67 NC68 NC69 NC70 NC71 NC72 PLLOFF IORIOW- DCMP0DCMP1- DACK0DACK1- DREQ0 DREQ1 EXA0 EXA1 IMUEIMLEIMRIMW- IREADY IHREQ IHACK ID15 ID14 ID13 ID12 ID11 ID10 ID9 ID8 ID7 ID6 ID5 ID4 ID3 ID2 ID1 ID0 IA15 IA14 IA13 IA12 IA11 IA10 IA9 IA8 IA7 IA6 IA5 IA4 IA3 IA2 IA1 IA0 56 119 120 117 116 74 73 67 68 69 70 71 72 TP541 R230 TP539 TP533 TP534 TP535 TP536 TP537 TP538 TP531 TP532 52 53 TP527 TP528 TP525 TP526 TP522 TP524 TP529 TP530 122 R213 10K 10K 33 33 10K 10K B2200p/50 C149 GND +3.3V +3.3V 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 GND F0.01u/50 C150 100 TP542 GND R231 GND 2K R228 R229 R219 TP513 TP515 TP516 R220 TP518 R223 TP512 58 57 64 63 49 48 62 61 59 60 50 51 TP508 TP510 ID15 ID14 ID13 ID12 ID11 ID10 ID9 ID8 ID7 ID6 ID5 ID4 ID3 ID2 ID1 ID0 TP490 TP491 TP492 TP493 TP494 TP495 TP496 TP497 TP498 TP499 TP500 TP501 TP502 TP503 TP505 TP507 95 96 97 98 99 100 101 104 105 106 107 108 109 110 111 112 46 47 IA15 IA14 IA13 IA12 IA11 IA10 IA9 IA8 IA7 IA6 IA5 IA4 IA3 IA2 IA1 IA0 TP474 TP475 TP476 TP477 TP478 TP479 TP480 TP481 TP482 TP483 TP484 TP485 TP486 TP487 TP488 TP489 75 76 77 78 79 82 83 84 85 86 87 88 89 90 93 94 4 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 R214 10K R215 10K BR97 MNR04 10K BR96 MNR04 10K BR95 MNR04 10K BR94 MNR04 10K +3.3V IA[0:15] R217 10K +3.3V R216 10K ID[0:15] 3 3 IA15 IA14 IA13 IA12 IA11 IA10 IA9 IA8 IA7 IA6 IA5 IA4 IA3 IA2 IA1 IA0 M1A[0:15] GND 6 17 41 39 40 1 2 3 4 5 18 19 20 21 24 25 26 27 42 43 44 IC17 VSS VSS VCC VCC NC NC NC I/O15 I/O14 I/O13 I/O12 I/O11 I/O10 I/O9 I/O8 I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0 M1CEM1WEM1OEM1LBM1UB- IS61LV6416-10TL CE WE OE LB UB A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 M1A15 M1A14 M1A13 M1A12 M1A11 M1A10 M1A9 M1A8 M1A7 M1A6 M1A5 M1A4 M1A3 M1A2 M1A1 M1A0 12 34 11 33 22 23 28 38 37 36 35 32 31 30 29 16 15 14 13 10 9 8 7 C136 F0.1u/16 ID15 ID14 ID13 ID12 ID11 ID10 ID9 ID8 ID7 ID6 ID5 ID4 ID3 ID2 ID1 ID0 2 6 17 41 39 40 1 2 3 4 5 18 19 20 21 24 25 26 27 42 43 44 GND + VSS VSS VCC VCC NC NC NC 12 34 11 33 22 23 28 38 37 36 35 32 31 30 29 16 15 14 13 10 9 8 7 GND 1 GND TP834 1 C134 A33u/10 TP833 I/O15 I/O14 I/O13 I/O12 I/O11 I/O10 I/O9 I/O8 I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0 +3.3V IS61LV6416-10TL CE WE OE LB UB A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 IC18 C135 F0.1u/16 2 M1D15 M1D14 M1D13 M1D12 M1D11 M1D10 M1D9 M1D8 M1D7 M1D6 M1D5 M1D4 M1D3 M1D2 M1D1 M1D0 6/10 GND 1 GND 1 GND TP832 1 TP831 + C152 A33u/10 +3.3V BR101 MNR04 33 BR100 MNR04 33 BR99 MNR04 33 BR98 MNR04 33 C154 F0.1u/16 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 C153 F0.1u/16 TP540 TP543 TP544 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 M1D[0:15] 1 A B C D [09]ELECTRICALSECTION.fm 7 ページ 2004年11月12日 金曜日 午後2時25分 A B C D CKIO_GA1 D[0:15] A[1:25] MDMRES- WE1WE0- CS5- MDMIRQ 0 8 R238 33 +3.3V 12 1 GND +3.3V MEM2012(NM) FB13 GND TP546 R275 GND 2 R410 IC38A TC74LCX00FT 3 47 47 IC31F TC74LCX14FT 13 C187 C100p/50 GND 100 R239 33 7 33 C357 C(NM) R407 GND D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4.7K R237 MDM3.3V 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 GND 1 11 3 4 7 8 13 14 17 18 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 1 41 75 74 73 71 72 10 20 2 5 6 9 12 15 16 19 25 24 22 20 19 18 16 14 13 12 10 8 7 6 4 2 TC74LVX273FT MR GND CP VCC D0 D1 D2 D3 D4 D5 D6 D7 IC50 BR108 MNR04 100 BR107 MNR04 100 BR106 MNR04 100 BR105 MNR04 100 BR104 MNR04 100 BR103 MNR04 100 BR102 MNR04 100 GND 100 98 96 95 94 93 91 90 88 87 85 84 R448 22 GND R466 22 TP547 GND R465 22 +3.3V GND R523 22 GND R458 22 GND 1 6 TP845 GND R D- GND +3.3V 47 47 47 47 47 47 C349 F0.1u/16 R530 R531 R532 R533 R534 R535 DPD15 DPD14 DPD13 DPD12 DPD11 DPD10 DPD09 DPD08 DPD07 DPD06 DPD05 DPD04 DPD03 DPD02 DPD01 DPD00 DPA11 DPA10 DPA09 DPA08 DPA07 DPA06 DPA05 DPA04 DPA03 DPA02 DPA01 DPA00 NRESET NDPCS NDPRD NDPWR NUB NLB T3IRQ C159 F0.1u/16 C161 F0.1u/16 C164 F0.1u/16 C166 F0.1u/16 C169 F0.1u/16 C171 F0.1u/16 C173 F0.1u/16 C175 F0.1u/16 C177 F0.1u/16 C178 F0.1u/16 C157 A33u/10 MDM3.3V C309 C342 C316 C317 C299 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 F0.1u/16 GND + C155 A33u/10 TP545 R254 GND C156 F0.1u/16 C163 F0.1u/16 C195 F0.1u/16 GND IC52A TC74LCX14FT 2 1 GND 0 14 7 R233 MDM3.3V MN195006E IC19 34 AVDD MDM1.8V 8 R539 4 47 R536 IC52B TC74LCX14FT 3 R(NM) 0 47 GND 1 GND TP836 1 TP835 76 77 79 81 82 83 65 66 69 67 59 60 63 61 57 58 45 46 48 49 50 39 38 43 37 51 GND GND 1 GND TP838 1 TP837 GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 BBITCLK BSPCLK BTXD BRXD ABITCLK ASPCLK ATXD ARXD EYECLK EYEDAT SCANNT MINTEST INTEST MODE0 MODE1 CXIN CXOUT CLKOUT CNT LON 0 0 5 11 GND GND R316 GND R556 R255 MMZ1005D680C R318 2 62 R557 R248 R(NM) R262 47K R273 47K 47 5 4 MDM_ABITCLK 4 10 R278 62 R541 R(NM) R540 0 IC38B TC74LCX00FT 6 MDM3.3V GND GND R263 47K MDM3.3V C354 C100p/50 FB14 MEM2012(NM) GND R246 0 IC52E TC74LCX14FT 11 MDM_ASPCLK MDM_ATXD MDM_ARXD MDMCLK IC31A TC74LCX14FT 1 4 1 4 C182 F0.1u/16 R(NM) VDD OE MDM3.3V R261 47K IC52C TC74LCX14FT 5 6 R270 R(NM) R260 47K IC31B TC74LCX14FT 3 47 GND GND R259 47K R269 47K R258 47K IC38C TC74LCX00FT 8 2 OUT FB16 2 JP4 MEM2012(NM) SD00415-52(NM) GND 2 JP5 MDM3.3V SD00415-52(NM) R268 47K 4 TP551 3 X4 SG-710ECKSCAV(24.576MHz) FB15 GND MEM2012(NM) MDM3.3V R247 33 IC38D TC74LCX00FT R274 33 R544 33 R543 33 R542 33 1 1 TP552 TP553 MDM3.3V 4.7K 4.7K 4.7K 47K GND C350 C(NM) 10 9 13 12 5 R240 R242 R249 R251 R252 R253 GND 26 27 36 33 31 29 28 C179 F0.1u/16 C160 F0.1u/16 C162 F0.1u/16 C165 F0.1u/16 C167 F0.1u/16 C170 F0.1u/16 C172 F0.1u/16 C174 F0.1u/16 C158 A33u/10 NDBGREQ DBGMOD PLLON TMS TCK TDI TDO + R537 R538 IC52D TC74LCX14FT 9 AVSS 35 R232 92 78 68 44 30 15 3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 VDD3 +3.3V 55 54 VDDREG VDDREG 6 97 86 62 42 21 9 VDD2 VDD2 VDD2 VDD2 VDD2 VDD2 7 53 52 REGOUT REGOUT VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS 99 89 80 70 64 56 47 40 32 23 17 11 5 3 R271 47K R265 47K GND R264 47K SPKRL LINEO GND VA VD LINEI MIC RESET +5V R272 R(NM) R267 47K 16 15 14 13 12 11 10 9 GND R266 47K SI3000-FS(NM) SPKRR MBIAS HDST SDI SDO FSYNC MCLK SCLK IC20 C189 F0.1u/16 1 2 3 4 5 6 7 8 3 GND C190 F0.1u/16 GND IC31D TC74LCX14FT 9 R250 R257 GND GND C186 F1u/10(1608) 4 2 3 Vhnd R245 10 GND 2 +5V MDM3.3V 5 IC21 RHS- GND R281 R(NM) R280 0 R256 R(NM) GND 13 +3.3V C188 A10u/16(NM) GND GND + NJM2135M-TE1(NM) 20K C176 B0.027u/10 SI3000-KS(NM) NJM2135M(NM) R(NM) 47k MD-S6100-90(NM) A10u/16(NM) A10u/16(NM) 22K IC31E TC74LCX14FT 11 IC20 IC21 R270 R260 CN10 C181 C188 HNDMUTE- Vhnd C185 A10u/16(NM) + 15K R236 2.2K C168 F0.1u/16 C181 A10u/16(NM) C183 F1u/10(1608) + C184 F10u/10(3216)(NM) 8 GND C180 F0.1u/16 MDM3.3V SI3OUT AFERES- GND R235 0 R234 R(NM) 2 6 1 7 8 FAX MAIN PWB(MN195006E) 14 7 AR-FX11 ELECTRICAL SECTION 9-8 14 + 7/10 GND GND 1 2 3 4 TP870 GND FB17 MEM2012(NM) 1 Vhnd 1 GND B4B-PH-K-S(NM) TX+ RX+ RXTX- C N6 5 3 1 CN10 MD-S6100-90(NM) C227 F0.1u/16 6 4 2 1 IC52F TC74LCX14FT 12 R279 0 GND 7 8 A B C D [09]ELECTRICALSECTION.fm 8 ページ 2004年11月12日 金曜日 午後2時25分 A B C D +3.3V GND 8 M2CEM2WEM2OE- TP558 GND M2A15 M2A14 M2A13 M2A12 M2A11 M2A10 M2A9 M2A8 M2A7 M2A6 M2A5 M2A4 M2A3 M2A2 M2A1 M2A0 3.3VGA2 6 17 41 39 40 1 2 3 4 5 18 19 20 21 24 25 26 27 42 43 44 1K R509 NC NC NC VSS VSS VCC VCC 1 TP750 TP751 TP752 22 23 28 12 34 11 33 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 M2A[0:15] 38 37 36 35 32 31 30 29 16 15 14 13 10 9 8 7 R503 R501 BR133 MNR04 33 BR132 MNR04 33 BR131 MNR04 33 BR130 MNR04 33 4.7K 33 33 + C224 A33u/10 GND TP640 TP643 TP646 TP649 TP655 TP656 TP658 TP661 TP664 TP671 TP674 TP677 TP678 TP679 TP680 TP681 TP599 TP601 33 33 TP607 TP610 TP613 TP565 TP617 TP619 TP622 TP625 TP628 TP631 TP633 TP637 TP584 TP583 TP587 TP589 TP591 TP593 TP594 M2D15 M2D14 M2D13 M2D12 M2D11 M2D10 M2D9 M2D8 M2D7 M2D6 M2D5 M2D4 M2D3 M2D2 M2D1 M2D0 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 33 33 R304 R305 C226 +3.3V F0.1u/16 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 5 6 7 8 5 BR92 6 MNR04 0 7 8 5 BR91 6 MNR04 0 7 8 5 BR90 6 MNR04 0 7 8 C225 F0.1u/16 7 R299 R297 R298 G1D4 G1D3 G1D2 G1D1 G1D0 BR109 MNR04 33 G2D7 1 8 G2D6 2 7 G2D5 3 6 G2D4 4 5 G2D3 1 8 G2D2 2 7 G2D1 3 6 TP572 TP574 TP576 TP578 TP580 G2D0 4 5 G1D7 BR110 G1D6 MNR04 33 G1D5 TP603 TP605 BR93 MNR04 0 CD2ACKD0- CD2REQD0 CD2ACKC0- CD 1D0 CD 1D1 CD 1D2 CD 1D3 CD 1D4 CD 1D5 CD 1D6 CD 1D7 CD 1D8 CD 1D9 C D1D10 C D1D11 C D1D12 C D1D13 C D1D14 C D1D15 TP840 GND CD2RDCD2WR- CD2IRQ1 G2ACKG2REQG1ACKG1REQ3.3VGA2 CD2REQC0 G1D[0:7] 1K R508 I/O15 I/O14 I/O13 I/O12 I/O11 I/O10 I/O9 I/O8 I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0 GND GND GND 1 TP839 G2D[0:7] GND IS61LV6416-10TL CE WE OE LB UB A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 IC24 C212 F0.1u/16 3.3VGA2 GND C207 F0.1u/16 3.3VGA2 GND C203 F0.1u/16 GND GND 3.3VGA2 + C202 A33u/10 CD1D[0:15] FB18 MEM2012(NM) 0 R289 GND GND-1 GND-2 G2D[7] G2D[6] G2D[5] G2D[4] G2D[3] G2D[2] G2D[1] NC TCK TDI TRST TDO G2D[0] G1D[7] G1D[6] G1D[5] VDD-19 GND-20 G1D[4] G1D[3] G1D[2] G1D[1] G1D[0] G2ACK_N G2REQ_N G1ACK_N G1REQ_N TMS TRES_N RAMTEST_N CDCLK CDRES_N CDIRQ0 CDIRQ1 VDD-37 VDD-38 GND-39 GND-40 CDUBE_N CDCS_N CDRD_N CDWR_N CDA[0] CDA[1] CDA[2] CDA[3] CDREQC0 CDREQC1 CDACKC0_N CDACKC1_N CDREQD0 CDREQD1 CDACKD0_N CDACKD1_N VDD-57 GND-58 CDD[0] CDD[1] CDD[2] CDD[3] CDD[4] CDD[5] CDD[6] CDD[7] CDD[8] CDD[9] CDD[10] CDD[11] CDD[12] CDD[13] CDD[14] CDD[15] GND-75 GND-76 GND C217 F0.1u/16 3.3VGA2 M2D[0:15] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 D[0:15] GND GND TP683 TP684 TP685 TP686 TP687 TP688 TP689 R311 33 R312 33 R313 33 8 7 BR118 6 MNR04 33 5 6 GND C218 F0.1u/16 3.3VGA2 M2CEM2OEM2WEM2A0 1 M2A1 2 M2A2 3 M2A3 4 0 GND GND IC22 uPD65954GL-084-NMU-A 3.3VGA2 GND C219 F0.1u/16 GND TP690 8 TP691 7 BR125 6 MNR04 33 TP692 TP693 5 TP694 8 TP695 7 BR119 6 MNR04 33 TP696 5 1 2 3 4 1 2 3 4 M2A4 M2A5 M2A6 M2A7 M2A8 M2A9 M2A10 M2A11 0 D7 D6 D5 D4 TP697 TP698 8 TP699 7 TP700 6 BR120 5 MNR04 33 TP701 TP702 8 TP703 7BR126 6 3.3VGA2 5 1 2 3 4 1 2 3 4 M2A12 M2A13 M2A14 M2A15 M2D0 M2D1 M2D2 M2D3 0 3.3VGA2 C201 F0.1u/16 GND GND 100 C205 C100p/50 R296 5 GND C220 F0.1u/16 3.3VGA2 GND C221 F0.1u/16 3.3VGA2 4 TP704 TP705 TP706 TP707 TP708 TP709 TP710 MNR04 33 1 8 2 7 BR121 3 6 MNR04 33 4 5 M2D4 M2D5 M2D6 M2D7 R288 GND 4 TP711 TP712 TP713 TP714 TP715 TP716 TP717 8 7 BR127 6 MNR04 33 5 8 7 BR122 6 MNR04 33 5 1 2 3 4 1 2 3 4 M2D8 M2D9 M2D10 M2D11 M2D12 M2D13 M2D14 M2D15 R287 3.3VGA2 C200 F0.1u/16 0 0 TP718 8 TP719 7 BR123 6 MNR04 33 TP720 TP721 5 TP722 8 TP723 7 BR128 6 MNR04 33 TP724 5 1 2 3 4 1 2 3 4 TP744 TP745 TP746 TP747 TP748 TP676 TP673 TP670 SDRAM_A0 SDRAM_A1 SDRAM_A2 SDRAM_A3 SDRAM_A4 SDRAM_A5 SDRAM_A6 SDRAM_A7 R284 3.3VGA2 C199 F0.1u/16 3.3VGA2 D15 D14 D13 D12 C198 F0.1u/16 3.3VGA2 CKIO_GA2 TP570 R291 4.7K TP571 R292 4.7K TP573 TP561 TP562 1 2 3 4 C197 F0.1u/16 D11 D10 D9 D8 R286 R283 WE1- TP725 TP726 8 TP727 7 BR124 6 MNR04 33 TP728 TP729 5 TP730 TP731 8 7 BR129 6 MNR04 33 5 1 2 3 4 TP742 TP743 TP734 SDRAM_A8 TP668 SDRAM_A9 TP666 SDRAM_A10TP663 SDRAM_A11TP660 SDRAM_A12TP657 SDRAM_BA0 SDRAM_BA1 SDRAM_CS- FAX MAIN PWB(GA2) D3 D2 D1 D0 IRQ2WAIT33 33 TP194 R551 TP564 R290 5 WE0RDBSCS2A25 A24 A23 A22 A21 A20 A19 A18 A17 A16 A15 A14 6 SDRAM_RASSDRAM_CASSDRAM_WR- 7 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 TP596 TP597 TP598 R505 R506 R507 RES- 3.3VGA2 GND C223 F0.1u/16 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 GND A[1:25] 0 R(NM) R(NM) GND-228 GND-227 PLL_RCLK GND-225 PLL_TMD[2] PLL_TMD[1] PLL_TMD[0] PLL_TOUT GND-220 VDD-219 READY_N FAXPRD_N HSYNC_N PRLINE_N FAXPAGE_N FAXCS1P_N FAXACK1P_N FAXREQ1P_N GND-210 VDD-209 FAXREQ0P_N FAXACK0P_N FAXCS0P_N SCLINE_N GND-204 VDD-203 GDATA[15] GDATA[14] GDATA[13] GDATA[12] GND-198 VDD-197 GDATA[11] GDATA[10] GDATA[9] GDATA[8] GND-192 GND-191 VDD-190 VDD-189 GDATA[7] GDATA[6] GDATA[5] GDATA[4] GND-184 VDD-183 GDATA[3] GDATA[2] GDATA[1] GDATA[0] GND-178 VDD-177 SDRAM_D[15] SDRAM_D[14] SDRAM_D[13] SDRAM_D[12] GND-172 VDD-171 SDRAM_D[11] SDRAM_D[10] SDRAM_D[9] SDRAM_D[8] SDRAM_D[7] SDRAM_D[6] SDRAM_D[5] GND-163 VDD-162 SDRAM_D[4] SDRAM_D[3] SDRAM_D[2] SDRAM_D[1] SDRAM_D[0] SDRAM_CKE SDRAM_CLK GND-154 GND-153 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 288 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270 269 268 267 266 265 264 263 262 261 260 259 258 257 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 VDD-304 VDD-303 D[15] D[14] D[13] D[12] GND-298 VDD-297 D[11] D[10] D[9] D[8] GND-292 VDD-291 D[7] D[6] D[5] D[4] GND-286 GND-285 D[3] D[2] D[1] D[0] GND-280 VDD-279 CLK_SYS TIN TEB_N TMOD1_N BSSEL[1] BSSEL[0] RES_N IRQ[2]_N WAIT_N WE1_N GND-268 GND-267 VDD-266 VDD-265 WE0_N RD_N BS_N CS5_N A[25]/TOUT5 A[24]/TOUT4 A[23]/TOUT3 A[22]/TOUT2 A[21]/TOUT1 A[20]/PLL_TFSEL1 A[19]/PLL_TFSEL0 A[18]/PLL_TSEL3 A[17]/PLL_TSEL2 A[16]/PLL_TSEL1 A[15]PLL_TSEL0 A[14]/PLL_TSMI GND-248 GND-247 A[13]/PLL_TCK1 A[12]/PLL_TCK0 A[11] A[10] A[9] A[8] A[7] A[6] A[5] A[4] A[3] A[2] A[1] PLL_SEL[2] PLL_SEL[1] PLL_SEL[0] VDD-230 VDD-229 VDD-77 VDD-78 MCE_N MOE_N MWE_N MA[0] MA[1] MA[2] MA[3] VDD-86 GND-87 MA[4] MA[5] MA[6] MA[7] MA[8] MA[9] MA[10] GND-95 GND-96 MA[11] MA[12] MA[13] MA[14] MA[15] MD[0] MD[1] VDD-104 GND-105 MD[2] MD[3] MD[4] MD[5] MD[6] MD[7] MD[8] VDD-113 VDD-114 GND-115 GND-116 MD[9] MD[10] MD[11] MD[12] MD[13] MD[14] MD[15] VDD-124 GND-125 SDRAM_A[0] SDRAM_A[1] SDRAM_A[2] SDRAM_A[3] SDRAM_A[4] SDRAM_A[5] SDRAM_A[6] GND-133 GND-134 SDRAM_A[7] SDRAM_A[8] SDRAM_A[9] SDRAM_A[10] SDRAM_A[11] SDRAM_A[12] SDRAM_BA[0] VDD-142 GND-143 SDRAM_BA[1] SDRAM_CS_N SDRAM_RAS_N SDRAM_CAS_N SDRAM_WR_N SDRAM_DQM0 SDRAM_DQM1 VDD-151 VDD-152 TP749 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 TP732 TP733 TP675 TP672 TP669 TP667 TP665 8 7 BR117 6 MNR04 33 5 1 2 3 4 AR-FX11 ELECTRICAL SECTION 9-9 TP737 TP738 TP739 TP740 8 3 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 TP859 TP860 TP861 TP862 TP863 TP864 TP865 TP866 TP608 TP611 TP614 TP618 TP620 TP623 TP626 TP629 TP632 TP634 TP638 3.3VGA2 GND 1 TP841 GND 1 2 3 4 1 2 3 4 1 2 3 4 TP855 TP856 TP857 TP858 R306 R308 R504 R513 R294 R303 GND 1 2 3 4 TP641 TP644 TP647 TP650 TP652 TP662 TP659 3.3VGA2 GND R295 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 BR116 MNR04 33 BR115 MNR04 33 BR114 MNR04 33 BR113 MNR04 33 8 7 BR112 6 MNR04 33 5 8 7 BR149 6 MNR04 33 5 8 7 BR148 6 MNR04 33 5 8 7 BR147 6 MNR04 33 5 8 7 BR146 6 MNR04 33 5 33 33 0 33 33 33 GND GND 1 TP842 GND C196 F0.1u/16 TP851 TP852 TP853 TP854 TP602 TP604 TP606 TP581 TP575 TP600 TP582 TP579 TP577 TP559 TP560 TP563 TP566 TP567 TP568 TP569 C222 F0.1u/16 GND 3 4 1 2 X5 VDD OE OUT GND 3 2 2 TP645 TP648 TP651 TP653 TP736 TP735 TP741 TP654 TP621 TP624 TP627 TP630 TP635 TP636 TP639 TP642 SDRAM_D11 SDRAM_D10 SDRAM_D9 SDRAM_D8 SDRAM_D7 SDRAM_D6 SDRAM_D5 SDRAM_D4 SDRAM_D3 SDRAM_D2 SDRAM_D1 SDRAM_D0 TP609 TP612 TP615 TP616 F0.1u/16 C214 F0.1u/16 C204 F0.1u/16 C210 SDRAM_D15 SDRAM_D14 SDRAM_D13 SDRAM_D12 GDATA3 GDATA2 GDATA1 GDATA0 GDATA7 GDATA6 GDATA5 GDATA4 GDATA11 GDATA10 GDATA9 GDATA8 GDATA15 GDATA14 GDATA13 GDATA12 FAXREQ0PFAXACK0PFAXCS0P- READYFAXPRDH SYNCPRLINEFAXPAGEFAXCS1PFAXACK1PFAXREQ1P- C209 F0.1u/16 GND GND GND GND GND SDRAM_A[0:12] C211 F0.1u/16 GND SDRAM_D[0:15] 3.3VGA2 SDRAM_CKE SDRAM_CLK SDRAM_DQM1 SDRAM_DQM0 GND C215 F0.1u/16 3.3VGA2 GND C213 F0.1u/16 3.3VGA2 C206 F0.1u/16 GND 3.3VGA2 3.3VGA2 3.3VGA2 F0.1u/16 C216 GDATA[0:15] C208 F0.1u/16 3.3VGA2 GND 3.3VGA2 0 FB20 MEM2012(NM) GND R300 3.3VGA2 SG-8002JC 40.6188M PCC-L2 R302 R(NM) FB19 MEM2012(NM) 0 3.3VGA2 1 1 8/10 A B C D [09]ELECTRICALSECTION.fm 9 ページ 2004年11月12日 金曜日 午後2時25分 AR-FX11 ELECTRICAL SECTION 9-10 A B C D 7 8 7 S DRAM _CSSDR A M _W R SDRAM _CASSDRAM _RASSDRAM _DQ M0 SDRAM _DQ M1 S DRAM _CL K S DRAM _CKE SDRAM _BA0 SDRAM _BA1 S D R A M _A[ 0: 12] FAX MAIN PWB(GA2-CPDEC) 8 6 6 _A0 _A1 _A2 _A3 _A4 _A5 _A6 _A7 _A8 _A9 _A1 0 _A1 1 _A1 2 TP760 SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM SDRAM 40 19 16 17 18 15 39 38 37 20 21 23 24 25 26 29 30 31 32 33 34 22 35 36 IC 2 5 GND GND GND GND GND GND GND VCC VCC VCC VCC VCC VCC VCC I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 I/O8 I/O9 I/O10 I/O11 I/O12 I/O13 I/O14 I/O15 5 W 9812G 6BH -75 NC CS WE CAS RAS DQML DQMU CLK CKE BA0 BA1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 5 6 12 28 41 46 52 54 1 3 9 14 27 43 49 2 4 5 7 8 10 11 13 42 44 45 47 48 50 51 53 C2 34 F0.1u/16 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 C2 36 F0.1u/16 B R 141 M N R 04 33 B R 140 M N R 04 33 B R 139 M N R 04 33 B R 138 M N R 04 33 C2 35 F0.1u/16 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 4 C2 37 F0.1u/16 S D RAM S D RAM S D RAM S D RAM S D RAM S D RAM S D RAM S D RAM S D RAM S D RAM S DRAM S DRAM S DRAM S DRAM S DRAM S DRAM C2 38 F0.1u/16 _D0 _D1 _D2 _D3 _D4 _D5 _D6 _D7 _D8 _D9 _D1 0 _D1 1 _D1 2 _D1 3 _D1 4 _D1 5 SDRAM _ D[ 0:15] 3 C2 39 F0.1u/16 3 C2 40 F0.1u/16 GN D GND 1 GND TP844 1 TP843 + C 233 A 33u /10 +3 .3 V 2 2 1 1 9/10 A B C D [09]ELECTRICALSECTION.fm 10 ページ 2004年11月12日 金曜日 午後2時25分 A B C 8 R361 1K 1K TP790 R353 10K VSEL TP763 R354 10K TP777 GN D 7 HS1 EXHS- HNDM UTE- CI RH S RH S- 33 33 R555 33 R553 R554 33 R552 GN D 1 2 TP794 B2B-PH-K-S(NM) RHS DG CN 8 R357 10K VSEL A K 9 TP795 TC74LCX14FT 6 12 GN D IC30F GN D 6 TC74LCX14FT 13 VEE VSS KA 10 DA204KT146 TC74LCX14FT 3 Y X VDD C255 C(NM) GN D TC74LCX14FT 1 D13 GN D +5VS R359 10K TC4052BF Y0 Y1 Y2 Y3 INH A B X0 X1 X2 X3 IC26 56K IC30D TC74LCX14FT +3.3V C193 F0.1u/16 8 IC30C 5 IC30B 4 IC30A 2 R358 10K 1 5 2 4 6 10 9 12 14 15 11 R333 GN D 56KTP781 TP789 R347 R340 56K 3.3K TP764 VR EF R332 Q12 DTC363EKA T146 B C Q13 DTC363EKA T146 B C Q14 DTC363EKA T146 B C + C258 A47u/16 VR EF VSEL R360 0 GN D +5V +5V GN D R345 GN D R334 1.6K Q9 DTC363EKA T146 B C TP776 F0. 1u/16 C249 GN D TP762 Q10 DTC363EKA T146 B C C250 B2200p /50 GN D ZD 4 UDZ TE-17 2.0B VOL [C] VOL[B] VOL[A] VOLCNT [B] VOLCNT [A] SPOUT E SPOUT C245 B4700p /50 20K E E R331 E BZ TP768 100 B1000p /50 C270 150VON- CION MDM_ATXD MDM_ASPCLK CID2 CML EC MDMCLK S HS2 LIUID +5VS R344 R346 R348 R349 R351 R352 R355 C268 5 GN D B1000p /50 TP769 MDM_ARXD RGDTAFERESMDM_ABITCLK SPOUT SI3OUT 10K R363 TP793 TP792 TP791 GN D 1 C251 F0. 1u/16 TP849 GN D IC30E TC74LCX14FT 11 R367 C257 C(NM) GN D VSEL TP778 C256 C(NM) 7 8 16 3 13 C246 F0. 1u/16 R335 1M VR EF 5.1K 10K 18K 33K 62K 100K 200K GN D TP774 TP779 TP782 TP783 TP784 TP785 TP786 +3.3V 6 11 10 9 13 14 15 12 1 5 2 4 GND C(NM) C267 GN D B1000p /50 C269 VEE VSS VDD X TC4051BF INH A B C X0 X1 X2 X3 X4 X5 X6 X7 IC27 GND C352 C(NM) R362 10K D R366 75K C243 F0. 1u/16 R365 10K VR EF R364 10K 56K R372 R330 R368 10K FAX MAIN PWB(TEL / LIU IF) R369 10K R(NM) E 5 7 8 16 3 4 4 GND 1 C252 F0.1u/16 TP850 GND R516 2.7K GN D VSEL TP770 R336 1M VR EF GND C353 C(NM) R370 10K 6 R371 10K 7 SPMUTE R341 5 6 7 8 GN D TP772 3 GN D + +3.3V C260 BR145 A33u/10 MNR04 2. 7K GN D + C261 A47u/16 C264 F0. 1u/16 +5VS MUTE C262 A47u/16 + GND C266 F0.1u/16 +24V + C253 A4. 7u/50 GN D +5V C265 F0. 1u/16 TP787 4 2 3 TP765 2 2 GN D 0 0 33 0 100 100 33 0 0 33 0 R388 R390 R391 R392 R393 R395 R396 R397 R399 R400 R401 C355 C(NM) 0 R386 TP788 100 33 100 100 33 0 0 0 33 33 GN D 680K DG DG +3.3V +5VS +24V ARXD RGDTnAFERESABITCLK AOUT Not used CIDSON HS2LIUID +5V AG Not used AG DG MCLOCK EXHSCION ATXD ASPCLKLIUID2 MRON Not used Not used Not used- CN9 0 TX25-30P-6ST-H1E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 GND + C242 A4. 7u/50 +5V SP- SP+ C248 A10u/16V(NP)(NM) R350 TP766 IC28 NJM2113M-TE1 5 R339 C244 B1000p /50 R373 R374 R375 R376 R378 R379 R381 R382 R383 R384 GN D GND + C254 A4. 7u/5 0 TP780 TP767 R338 100K R343 0 TP773 3.3K R356 22K R342 +5V Q11 DTC363EKA T146 B C 3. 3k TP771 C247 F0.1u/16 R337 ) R(NM +5V 3 6 1 7 8 8 14 7 AR-FX11 ELECTRICAL SECTION 9-11 4 3 2 1 E 10/10 TP775 1 1 2 3 1 2 3 CN7 B3B-PH-K-S(LF) SP OUT 1 A B C D [09]ELECTRICALSECTION.fm 11 ページ 2004年11月12日 金曜日 午後2時25分 A B L1 T1 T2 MJ-62J-RD315 1 2 3 4 5 6 MJ2 MJ-64J-RD315 1 2 3 4 5 6 L25 SBT-0260 L24 SBT-0260 8 C107 1000p/AC250V (7.5mm) MJ1 SA6 (U) DSS-401M (E) DSS-301L C90 (E) A0.47u/50V(N.P.) L10 SBT-0260 L26 (NM) ST-101 JP5 (NM) 0 1/4W (5mm/10mm pitch) (U) 91 1/4W (E) 0 1/4W R205 C48 B0.01u/50V R189 120K R177 (E) 1.78KF 2W 2 1 7 S3B RSB-5 13 S3A RSB-5 4 9 11 8 6 (NM) OUAZ-SH-105D 3 S4A L23 (NM) EL0607RA-331J L21 ST-110AV L32 B-01A (5/10/12.5mm) L22 (NM) EL0607RA-331J B R186 2.2K 1/10W ZD18 RD43FM R203 680 1/10W B 6 R252 (U) EL0607RA-331J (E) 10 1/4W C91 (E) A0.47u/50V(N.P.) L12 BLM31A601S R204 680 1/10W (U) 0 1/4W (E) LHL10TB151K L14 C61 (NM) 1000p/AC250V (7.5mm) C57 (NM) 1000p/AC250V (7.5mm) L13 (U) 0 1/4W (E) LHL10TB151K L11 BLM31A601S R185 150 R184 100KF R194 (U) 5.36KF 1/4W (3225) L15 0 1/4W C45 B0.1u/50V Q113 (NM) 2SD1266A (TO-220) C50 B1800p/50V (1608) B NLV32T-R47J L31 B K A E C87 (NM) B0.027u/50V C86 (NM) B0.027u/50V C43 B1u/16V 5 4 3 16 15 14 13 12 11 10 9 QE2 DCT IGND C1B RNG1 RNG2 QB QE 1 2 3 4 5 6 7 8 AK 39K 1W R168 C97 (NM) B470p/250V (3216) C63 B470p/250V (1608) VA4 (NM) DSSA-P3100SB C55 B470p/250V (1608) C96 (NM) B470p/250V (3216) 0.22u 250V C25 Si3015-FS FILT2 FILT RX REXT REXT2 REF VREG2 VREG IC4 (10mm/15mm pitch) R202 56K 1/10W 1 2 S1ZB60 D8 R199 56K 1/10W R195 9.31KF C R190 78.7F C53 B0.68u/16V R181 (U) 5.36KF 1/4W (3225) ZD19 RLZ5.6B Q117 2SD1733 (SC-63) C E C52 B0.1u/16V (1608) R180 (U) 5.36KF 1/4W (3225) K A D7 DAN217 R179 (U) 5.36KF 1/4W (3225) D2 1SS355 C56 B3300p/50V (1608) ZD12 MTZJ30B A C98 (NM) B0.022u/250V (3216) 4 C46 C68 R187 10p/50V (1608) 2 1 150p/AC250V (7.5mm) (NM) 150p/AC250V (5750) PC6 TLP621 +5VS PC11 (U) TLP620 3 IC6 (E) THS-56F 7 6 5 4 DAAGND C109 (NM) 150p/AC250V (7.5mm) C64 AK 150p/AC250V (7.5mm) 10 1/10W (NM) 150p/AC250V (5750) ZD26 ZD27 (NM) MTZJ30B (NM) MTZJ30B K A A K K 10 1/10W R188 C59 B0.022u/250V (2125) 3 RLZ5.6B R182 (E) 1.78KF 2W D6 DAN217 Q119 2SA1759 (SC-62) E C Q120 2SC4548 (SC-62) L6 (E) LHL08TB102J R251 (U) EL0607RA-331J (E) 10 1/4W L9 SBT-0260 F2 0 1/4W SA4 SA5 H1 DSS-401M DSS-401M B C E 3 AG AG +5VS DG R255 0 1/16W(1608) AG + Q130 DTC114EKA B C C95 (U) B1000p/50V (1005) 16 15 14 13 12 11 10 9 RGDT- 1 2 DAAGND CID- CID2- 0 1/16W(1005) DAAGND HS2- 0 1/16W(1608) R262 DAA3.3V FB2 (NM) MEM2012 3 R198 0 1/16W(1608) DAAGND (E) NC7SZ08MSX or NC7ST08M5X or Equivalent 4 IC9 0 1/16W(1608) 0 1/16W(1608) 1 DAAGND R279 0 1/16W(1005) R280 0 1/16W(1608) R263 +3.3V DAA3.3V AFERES- MDM_ARXD MDM_ATXD MDM_ASPCLK MDM_ABITCLK MDMCLK 1/2 HS1- R288 (NM) 10k (1005) 2 MMZ1608D500C (1608) MMZ1608D500C (1608) R281 R282 L29 L30 0 1/16W(1005) R278 R299 4.7k 1/16W(1005) 4 IC12 (NM) TC7S14 DAA3.3V 1 2 1 (U): For North America (E): For Europe and Australia R without specified W is 1/15W. 1/4W or above without specified size is DIP. 0 1/16W(1608) R266 R209 0 1/16W(1608) AG DAA3.3V DAA3.3V C47 B0.1u/16V (1608) Q133 (E) DTC114EKA B C AOUT 1 2 3 4 5 6 7 8 C115 B0.1u/16V (1608) Si3021-FS 2 B1000p/50V (1005) C94 OFHK MCLK RGDT/FSD FSYNC M0 SCLK VA VD GND SDO C1A SDI M1 FC/RGDT AOUT RESET IC3 R183 0 1/16W(1608) DAA3.3V C92 (E) F0.1u/16V (1005) DAAGND DAAGND DAA3.3V C49 Q118 2SC4548 (SC-62) C E C58 C62 C BLM31A601S L27 C66 33p/50V C67 33p/50V R192 (U) 5.36KF 1/4W (3225) 1000p/AC250V (7.5mm) 1000p/AC250V (7.5mm) R191 402F L16 (NM) LHL13TB103J C65 (NM) B0.01u/250V 10M R200 R264 10K (1608) D BLM31A601S L28 C105 C104 (NM) 1000p/AC250V (5750) (NM) 1000p/AC250V (5750) R196 215F R201 10M K A C42 B0.22u/16V (2125) C51 B0.1u/16V (1608) SA7 (U) DSS-401M (E) DSS-301L LIU PWB A KK A C69 (NM) B0.01u/250V K A Primary side R206 (U) 30 1/4W (NM)(1005) C110 Secondary side 2 1 2 1 4 3 C60 B3300p/50V (1608) K A 4 3 ZD24 (U) HZS2C1 ZD25 (U) HZS2C1 K A ZD17 R253 4 B0.22u/16V (2125) C72 (NM)(1608) C111 5 10K (1608) 5 (NM)(1608) C112 6 B1000p/50V (1005) 5 7 E 2 1 (NM)(1608) C113 8 C73 A0.33u/50V E AR-FX11 ELECTRICAL SECTION 9-12 3 3 (NM)(1608) C114 A B C D [09]ELECTRICALSECTION.fm 12 ページ 2004年11月12日 金曜日 午後2時25分 R193 (U) 5.36KF 1/4W (3225) C106 1000p/AC250V (7.5mm) A B C D 8 LIU PWB 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 7 TX24-30R-12ST-H1 150VON HS1 ECON MRON LIUID2 ASPCLKATXD CION EXHKDMCLOCK DG AG FNETD AG +5V LIUID HS2 SON CID DPMUTE AOUT ABITCLK nAFERESRGDTARXD +24V +5VS +3.3V DG DG CN1 DG AG AG H2 + 6 6 +3.3V B-01A L34 5 (NM) BLM31A601S AG + 5 L33 R178 (NM) 0 1/4W 0 1/4W (JP) TP7 DG + 0 1/4W (JP) TP3 AOUT MDM_ABITCLK AFERESRGDTMDM_ARXD CID- HS2- MDMCLK CID2MDM_ASPCLK MDM_ATXD HS1- 0 1/4W (JP) TP4 C38 A47u/25V 7 C41 F0.1u/16V (1005) 8 C37 (NM) A47u/25V +5V C39 A47u/25V C40 F0.1u/16V (1005) AR-FX11 ELECTRICAL SECTION 9-13 AG +5VS AG + DG C35 F0.1u/16V (1005) C31 (NM) A47u/35V +24V DG R208 (NM) 0 1/16W(1005) 4 4 Q116 DTD113ZK B C 3 3 AG E 4 16 + + K 5 1 +5VS 2 (NM) OUAZ-SH-105D - S4B RSB-5 - S3C 1SS355 D5 A 2 1 1 2/2 A B C D [09]ELECTRICALSECTION.fm 13 ページ 2004年11月12日 金曜日 午後2時25分 [10]LeadFree.fm 1 ページ 2004年11月16日 火曜日 午後6時50分 LEAD-FREE SOLDER The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The alphabet following the LF mark shows the kind of lead-free solder. Example: <Solder composition code of lead-free solder> Lead-Free 5mm Solder composition code (Refer to the table at the right.) a Solder composition Solder composition code Sn-Ag-Cu a Sn-Ag-Bi Sn-Ag-Bi-Cu b Sn-Zn-Bi z Sn-In-Ag-Bi i Sn-Cu-Ni n Sn-Ag-Sb s Bi-Sn-Ag-P Bi-Sn-Ag p (1) NOTE FOR THE USE OF LEAD-FREE SOLDER THREAD When repairing a lead-free solder PWB, use lead-free solder thread. Never use conventional lead solder thread, which may cause a breakdown or an accident. Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-use soldering iron is recommendable. (2) NOTE FOR SOLDERING WORK Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity is inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may exceed the heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering is confirmed. Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently. If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip after completion of soldering work. If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer. q PARTS GUIDE CODE:00ZARFX11/P1E DIGITAL COPIER OPTION FAX EXPANSION KIT MODEL AR-FX11 CONTENTS 1 Packing material & Accessories 2 FAX main PWB unit 3 TEL/LIU PWB unit ■ Index SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without ontice. DEFINITION The definition of each Rank is as follows and also noted in the list Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts Rank E : Unit parts including PWB Rank D : Preparation parts (External fitting, packing, parts packed together) Rank C : Parts other than the above (excluding sub components of PWB) Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification. F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model. F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department. * These parts are supplied by SMF. 1 Packing material & Accessories NO. 1 2 3 5 6 7 8 9 10 11 12 16 17 18 19 20 21 22 23 24 25 26 27 28 29 101 102 103 104 105 108 109 PARTS CODE TCADZ0364QSZZ TCADZ0404TSZZ TINSE1363QSZZ TINSE1400TSZZ TINSX1401TSZZ TINSF1402TSZZ TINSI1403TSZZ TINSS1404TSZZ SSAKA2345QCZZ SPAK-547ECCZZ DUNT-0533QS11 CPLTP0378QS02 JBTN-0089QSZZ CPNLH0040QS02 MLEVP0109QSZZ CPWBF0178QS31 XEBSD30P08000 XHBSE30P08000 RSP-Z0001QSPZ LX-HZ0002QSZZ LPLTM0383QSZZ CPWBX0171QS32 CPWBX0171QS33 CPWBX0171QS34 XBPS730P08KS0 CPWBN0173QS31 CPWBN0173QS32 VHI29L32007QS VHI29L32008QS VHI29L32009QS TLABF0588QSZZ TLABG0613QSZZ SSAKA0006UCZZ QCNWG0013QSZZ QCNW-7252HSZZ QCNW-7253HSZZ QCNW-7254HSZZ RADPA0002TSZZ RADPA0003TSZZ RADPA0007TSZZ QPLGZ0001TSZZ SPAKP2374ACZZ LSUPP0001QSZZ TLABH0604QSZZ TLABH0605QSZZ SSAKA2440QCZZ TINSX1405TSZZ TINSH1406TSZZ TINSX1407TSZZ TLABG0371TSZZ TLABZ0622TSZZ TLABP0576QSZZ PRICE NEW RANK MARK AN N N BN N N N N N N AC AB BB N AR N AP N AT N AN N AY N AA AA AG N AC AY N CQ N CQ N CQ N AB N BQ N BS N BC N BC N BC N AC N AE N AA AF N AR N AT N AP N N N N N AD AC AD N AD N AB N N N N N AD N ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ PART RANK D D D D D D D D D D E C C C C E C C B C C E E E C E E B B B D D D C C C C B B B C D C D D D D D D D D D DESCRIPTION FAX inst. manual FAX inst. manual Operation manual Operation manual Operation manual Operation manual Operation manual Operation manual Vinyl bag(260×360mm) Vinyl bag(280mm) FAX key unit FAX sub panel Shortening key FAX key panel FAX panel lever FAX key PWB Screw(3×8) Screw(3×8) Speaker Screw FAX fixing plate FAX main PWB unit FAX main PWB unit FAX main PWB unit Screw(3×8KS) TEL/LIU PWB unit TEL/LIU PWB unit FAX FLASH ROM FAX FLASH ROM FAX FLASH ROM Circuit authorization label Circuit authorization label Vinyl bag(50×60mm) Line cable Line cable Line cable Line cable AC adaptor AC adaptor AC adaptor Plug Vinyl bag(250×360mm) LIU spacer Line label TEL label Vinyl bag(280×410mm) Quick manual Quick manual Quick manual LPD FAX label White label FAX address label –1– [U.S.A,Canada] [Europe] (FAX)[U.S.A,Canada] (FAX)[U.kingdom,Denmark,Finland,Norway,Holland] (FAX)[Switzerland,Germany] (FAX)[France] (FAX)[Italy] (FAX)[Spain] [Except Australia,New Zealand] [U.S.A,Canada] [Australia,New Zealand] [Other Countries] [U.S.A,Canada] [Except U.S.A,Canada] [U.S.A,Canada] [Australia,New Zealand] [Other Countries] [U.S.A,Canada] [Australia,New Zealand] [U.S.A,Canada] [Germany] [France] [Other Countries] [U.kingdom] [Holland] [Spain] [Switzerland] [Except U.S.A,Canada] [Except U.S.A,Canada] [Europe] [Denmark,Finland,Norway] [Holland] [Switzerland] [Spain] [Europe] 1 Packing material & Accessories 3 7 1 9 2 8 26 27 5 11 10 12 6 25 24 21 28 22 21 23 21 29 21 21 20 21 19 18 17 16 PRP02448 16 –2– 2 FAX main PWB unit NO. 1 2 3 4 5 7 8 10 11 12 15 16 17 18 19 ! 20 22 23 25 26 27 29 33 34 PARTS CODE PCOVP1468FCZZ QCNCM0149QSPZ QCNCM0150QSPZ QCNCM0151QSZZ QCNCM7014SC0C QSOCZ0094FCPZ RCRSC0014QSZZ RCRUA0034QSPZ RCRUA0035QSPZ RCRUA0037QSPZ RMPTR4000ACZZ RMPTR4101ACZZ RMPTR4101ACZZ RMPTR4103ACZZ RMPTR4103ACZZ RMPTR4103ACZZ RMPTR4272ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4330ACZZ RMPTR4472ACZZ UBATI0014FCZZ VCCCCZ1EH271J VCCCCZ1HH101J VCCCCZ1HH101J VCCCCZ1HH101J VCCCCZ1HH101J VCCCCZ1HH101J VCCCCZ1HH101J VCCCCZ1HH151J VCCUCY1AJ105Z VCEASM1CM106M VCKYCZ1AB273K VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z PRICE NEW RANK MARK AD AT N AG N AE N AA AL AH AR N AR N AR N AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AN AA AA AA AA AA AA AA AC AC AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB PART RANK D C C C C C B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C DESCRIPTION FAX battery cover Connector(TX25-50P-23ST-H1E) Connector(TX25-30P-6ST-H1E) Connector(RE-H062SD-1190) Connector(B3B-PH-K-S) Connector(DIM2-SD72AR-1131-F) Crystal(32.768KHz) Crystal(19.6608MHz) Crystal(40.6188MHz) Crystal(16.0000MHz) Block resistor(0Ω×4) Block resistor(100Ω×4) Block resistor(100Ω×4) Block resistor(10KΩ×4) Block resistor(10KΩ×4) Block resistor(10KΩ×4) Block resistor(2.7KΩ×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(33Ω×4) Block resistor(4.7KΩ×4) Battery(CR2477-H01) Capacitor(25WV 270pF) Capacitor(50WV 100pF) Capacitor(50WV 100pF) Capacitor(50WV 100pF) Capacitor(50WV 100pF) Capacitor(50WV 100pF) Capacitor(50WV 100pF) Capacitor(50WV 150pF) Capacitor(10WV 1.0µF) Capacitor(16WV 10µF) Capacitor(10WV 0.027µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) –3– [BT4] [CN5] [CN9] [SW1] [CN7] [CN3,CN4] [X2] [X1] [X5] [X3] [BR90,BR91,BR92,BR93] [BR102,BR103,BR104,BR105,BR106] [BR107,BR108] [BR32,BR33,BR34,BR35,BR36] [BR39,BR56,BR57,BR58,BR59] [BR60,BR94,BR95,BR96,BR97] [BR145] [BR1,BR3,BR5,BR10,BR12] [BR14,BR16,BR18,BR20,BR22] [BR24,BR26,BR28,BR30,BR37] [BR38,BR40,BR41,BR42,BR43] [BR44,BR45,BR46,BR47,BR48] [BR49,BR50,BR51,BR52,BR53] [BR54,BR55,BR61,BR62,BR63] [BR64,BR65,BR66,BR67,BR68] [BR69,BR70,BR71,BR72,BR73] [BR74,BR76,BR77,BR78,BR80] [BR81,BR82,BR83,BR84,BR85] [BR98,BR99,BR100,BR101,BR109] [BR110,BR112,BR113,BR114,BR115] [BR116,BR117,BR118,BR119,BR120] [BR121,BR122,BR123,BR124,BR125] [BR126,BR127,BR128,BR129,BR130] [BR131,BR132,BR133,BR138,BR139] [BR140,BR141,BR146,BR147,BR148,BR149] [BR7,BR8,BR9] [BT1] [C5] [C84,C85,C86,C87,C88] [C91,C92,C93,C94,C95] [C97,C121,C187,C205,C321] [C322,C323,C324,C325,C326] [C327,C328,C329,C330,C331] [C332,C333,C334,C335,C336,C354] [C68,C71] [C183,C186] [C59,C62,C65,C66] [C176] [C1,C2,C3,C4,C8] [C11,C12,C13,C14,C15] [C16,C17,C18,C19,C20] [C21,C22,C23,C24,C25] [C26,C27,C28,C32,C33] [C36,C37,C38,C39,C40] [C41,C43,C46,C47,C48] [C49,C54,C57,C58,C60] [C61,C63,C67,C70,C75] [C77,C79,C98,C100,C101] [C102,C103,C104,C105,C106] [C107,C108,C109,C110,C111] [C112,C113,C115,C116,C117] [C118,C119,C120,C122,C123] [C124,C125,C126,C127,C128] [C129,C130,C131,C132,C133] [C135,C136,C137,C138,C139] [C140,C141,C142,C143,C144] [C145,C146,C147,C151,C153] [C154,C156,C159,C160,C161] [C162,C163,C164,C165,C166] [C167,C168,C169,C170,C171] [C172,C173,C174,C175,C177] [C178,C179,C180,C182,C189] [C190,C193,C194,C195,C196] [C197,C198,C199,C200,C201] [C203,C204,C206,C207,C208] [C209,C210,C211,C212,C213] [C214,C215,C216,C217,C218] [C219,C220,C221,C222,C223] [C225,C226,C227,C228,C234] [C235,C236,C237,C238,C239] 2 FAX main PWB unit NO. 34 35 36 37 38 39 40 41 42 47 48 49 50 51 52 54 55 56 59 60 61 62 64 66 70 71 72 73 74 75 76 77 PARTS CODE VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1HB102K VCKYCZ1HB102K VCKYCZ1HB222K VCKYCZ1HB471K VCKYCZ1HB472K VCKYCZ1HF103Z VHD1SS355//-1 VHDDA204K//-1 VHEUDZ2.0B/-1 VHI74LCX00FT1 VHI74LCX08FT1 VHI74LCX14FT1 VHI74LCX244FT VHI74LCX32FT/ VHILM111718-1 VHIMN86065+-1 VHIN195006E-1 VHINJM2113M-1 VHIPST3426U-1 VHIPST591IM-1 VHISD4M16L1-1 VHISH770910-1 VHISM8578BV-1 VHIT4052BFF-1 VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD000J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD101J VRS-CZ1JD102J VRS-CZ1JD102J VRS-CZ1JD102J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD103J VRS-CZ1JD104J VRS-CZ1JD105J VRS-CZ1JD153J VRS-CZ1JD162J PRICE NEW RANK MARK AB AB AB AB AB AB AB AB AB AB AB AB AB AB AA AA AA AA AA AA AB AC AC AE AF AF AH AE AH BN BK AG AE AG AZ BH AK AG N AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA PART RANK C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B B B B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C DESCRIPTION Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(50WV 1000pF) Capacitor(50WV 1000pF) Capacitor(50WV 2200pF) Capacitor(50WV 470pF) Capacitor(50WV 4700pF) Capacitor(50WV 0.01µF) Diode(1SS355) Diode(DA204K) Zener diode(UDZ2.0B) IC(74LCX00FT1) IC(74LCX08FT1) IC(74LCX14FT1) IC(TC74LCX244) IC(74LCX32FT) IC(LM1117MPX-1.8) IC(MN86065) IC(MN195006E) IC(NJM2113-M) IC(PST3426) IC(PST591IMT) IC(SD4M16L1) IC(HD6417709AF100) IC(SM8578BV) IC(TC4052BF) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 100Ω ±5%) Resistor(1/16W 100Ω ±5%) Resistor(1/16W 100Ω ±5%) Resistor(1/16W 100Ω ±5%) Resistor(1/16W 100Ω ±5%) Resistor(1/16W 1.0KΩ ±5%) Resistor(1/16W 1.0KΩ ±5%) Resistor(1/16W 1.0KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 100KΩ ±5%) Resistor(1/16W 1.0MΩ ±5%) Resistor(1/16W 15KΩ ±5%) Resistor(1/16W 1.6KΩ ±5%) –4– [C240,C243,C246,C247,C249] [C251,C252,C264,C265,C266] [C274,C275,C276,C277,C278] [C279,C280,C281,C282,C283] [C284,C285,C286,C287,C288] [C289,C290,C291,C292,C293] [C294,C295,C296,C297,C298] [C299,C300,C301,C302,C303] [C304,C305,C306,C307,C308] [C309,C310,C311,C312,C313] [C314,C315,C316,C317,C318] [C319,C320,C337,C338,C339] [C340,C341,C342,C343,C344] [C345,C346,C347,C348,C349] [C29,C30,C82,C83,C89] [C90,C96,C244,C268,C269,C270] [C50,C149,C250] [C9,C10] [C245] [C72,C73,C150] [D2,D3,D9,D11] [D13,D1] [ZD1,ZD2,ZD3,ZD4] [IC38] [IC35] [IC29,IC30,IC31,IC36,IC52] [IC45,IC2] [IC37] [IC14] [IC16] [IC19] [IC28] [IC13] [IC7] [IC8,IC9] [IC1] [IC10] [IC26] [R9,R14,R18,R26,R32] [R37,R45,R49,R53,R54] [R79,R118,R123,R124,R127] [R130,R158,R159,R161,R162] [R163,R164,R170,R171,R172] [R173,R174,R175,R204,R205] [R221,R222,R232,R233,R235] [R240,R242,R246,R279,R280] [R283,R284,R286,R287,R288] [R289,R295,R300,R342,R350] [R360,R379,R381,R382,R386] [R388,R390,R392,R397,R399] [R401,R504,R505,R538,R540] [R3,R4,R19,R60,R63] [R148,R149,R156,R157,R165] [R188,R231,R254,R296,R367] [R373,R375,R376,R393,R395] [R526,R527,R528,R529] [R73,R75,R85,R103,R112] [R119,R208,R211,R345,R361] [R508,R509,R510,R511] [R12,R17,R22,R23,R28] [R31,R35,R38,R39,R41] [R42,R44,R47,R51,R61] [R62,R64,R65,R74,R76] [R77,R78,R86,R90,R91] [R92,R93,R94,R95,R96] [R98,R99,R102,R104,R111] [R137,R138,R139,R140,R141] [R142,R143,R144,R145,R146] [R167,R168,R213,R214,R215] [R216,R217,R219,R228,R229] [R346,R353,R354,R357,R358] [R359,R362,R363,R364,R365] [R369,R370,R371,R372,R416] [R422,R423,R512] [R352,R338] [R335,R336] [R250] [R125,R128,R334] 2 FAX main PWB unit NO. 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 99 100 102 103 104 106 108 901 PARTS CODE VRS-CZ1JD183J VRS-CZ1JD202J VRS-CZ1JD203J VRS-CZ1JD204J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD220J VRS-CZ1JD222J VRS-CZ1JD223J VRS-CZ1JD272J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD330J VRS-CZ1JD331F VRS-CZ1JD332J VRS-CZ1JD333J VRS-CZ1JD361J VRS-CZ1JD470J VRS-CZ1JD470J VRS-CZ1JD470J VRS-CZ1JD472J VRS-CZ1JD472J VRS-CZ1JD473J VRS-CZ1JD473J VRS-CZ1JD473J VRS-CZ1JD512J VRS-CZ1JD561J VRS-CZ1JD562J VRS-CZ1JD563J VRS-CZ1JD623J VRS-CZ1JD682J VRS-CZ1JD753J VRS-CZ1JD821J VRS-CZ1JD823J VRS-TS2AD471J VSDTC363EKA-1 VSDTC363EKA-1 (Unit) CPWBX0171QS32 PRICE NEW RANK MARK AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AF AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AC AC CQ N PART RANK C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B E DESCRIPTION Resistor(1/16W 18KΩ ±5%) Resistor(1/16W 2.0KΩ ±5%) Resistor(1/16W 20KΩ ±5%) Resistor(1/16W 200KΩ ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 22Ω ±5%) Resistor(1/16W 2.2KΩ ±5%) Resistor(1/16W 22KΩ ±5%) Resistor(1/16W 2.7KΩ ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 33Ω ±5%) Resistor(1/16W 330Ω ±1%) Resistor(1/16W 3.3KΩ ±5%) Resistor(1/16W 33KΩ ±5%) Resistor(1/16W 360Ω ±5%) Resistor(1/16W 47Ω ±5%) Resistor(1/16W 47Ω ±5%) Resistor(1/16W 47Ω ±5%) Resistor(1/16W 4.7KΩ ±5%) Resistor(1/16W 4.7KΩ ±5%) Resistor(1/16W 47KΩ ±5%) Resistor(1/16W 47KΩ ±5%) Resistor(1/16W 47KΩ ±5%) Resistor(1/16W 5.1kΩ ±5%) Resistor(1/16W 560Ω ±5%) Resistor(1/16W 5.6KΩ ±5%) Resistor(1/16W 56KΩ ±5%) Resistor(1/16W 62KΩ ±5%) Resistor(1/16W 6.8KΩ ±5%) Resistor(1/16W 75KΩ ±5%) Resistor(1/16W 820Ω ±5%) Resistor(1/16W 82KΩ ±5%) Resistor(1/10W 470Ω ±5%) Transistor(DTC363EKA) Transistor(DTC363EKA) FAX main PWB unit –5– [R348] [R230] [R122,R245,R331] [R355] [R424,R425,R426,R427,R428] [R429,R430,R431,R432,R433] [R434,R435,R436,R437,R438] [R439,R440,R441,R442,R443] [R444,R445,R446,R447,R448] [R449,R450,R451,R452,R453] [R454,R455,R456,R457,R458] [R459,R460,R461,R462,R463] [R464,R465,R466,R467,R468] [R518,R519,R520,R521,R522] [R523,R524,R525] [R101,R110,R236] [R356,R257] [R516] [R7,R8,R13,R46,R48] [R55,R56,R57,R58,R59] [R66,R67,R68,R69,R70] [R80,R81,R83,R84,R87] [R88,R89,R97,R100,R109] [R117,R129,R136,R147,R150] [R151,R152,R153,R154,R155] [R160,R166,R176,R177,R178] [R179,R180,R181,R182,R183] [R184,R186,R187,R189,R190] [R191,R192,R193,R194,R195] [R196,R197,R198,R199,R200] [R201,R210,R220,R223,R227] [R238,R239,R247,R274,R290] [R294,R297,R298,R303,R304] [R305,R306,R308,R311,R312] [R313,R374,R378,R383,R384] [R391,R396,R400,R407,R409] [R421,R501,R503,R513,R514] [R515,R517,R542,R543,R544] [R545,R546,R547,R548,R549] [R550,R551,R552,R553,R554,R555] [R34] [R5,R332,R341,R343,R417] [R349] [R120] [R30,R275,R318,R410,R530] [R531,R532,R533,R534,R535] [R536,R539,R557] [R1,R2,R6,R185,R237] [R249,R251,R252,R291,R292,R299] [R253,R258,R259,R260,R261] [R262,R263,R264,R265,R266] [R267,R268,R269,R271,R273] [R344] [R121] [R113,R105] [R330,R333,R340,R347] [R351] [R10] [R366] [R15,R16,R20,R21] [R126] [R114,R106] [Q8,Q9,Q10,Q11,Q12] [Q13,Q14] [U.S.A,Canada] 3 TEL/LIU PWB unit NO. 1 2 3 8 9 10 11 13 19 20 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 65 67 68 69 70 71 72 73 77 78 901 PARTS CODE QCNCW0069QSZZ QJAKT0001FCZZ QJAKT0004QSZZ RCILZ0008QSZZ RCILZ0089FCZZ RCORF1003MCZZ RCILZ7012XCZZ RFILN2011SCZZ VCCCCY1HH100D VCCCCY1HH330J RC-EZ0365FCPZ VCFYPU2EA474K VCFYJU2EA224K VCKYCY1CB104K VCKYCY1HB103K VCKYCY1HB182K VCKYCY1HB332K VCKYCZ1CF104Z VCKYCZ1CF104Z VCKYCZ1HB102K VCKYCZ1HB102K VCKYTV1CB105K VCKYTV1CB224K VCKYTV1CB684K VCKYTW1HB104K VHD1SS355//-1 VHDDAN217//-1 VHDS1ZB60//-1 VHEHZS2A1//-1 VHEMTZJ30B/-1 VHERLZ5.6B/-1 VHITC7SET08F/ VHISI3015FS-1 VHISI3021FS-1 VHITHS56F//-1 VHPTLP620-1GB VHPTLP621-1GB VHVDSS301L/-1 VHVDSS-401M// VHVDSS-401M// VRD-HT2EY000J VRD-HT2EY000J VRD-HT2EY000J VRD-HT2EY100J VRD-HT2EY300J VRD-HT2EY910J VRS-CY1JD000J VRS-CY1JD000J VRS-CY1JD103J VRS-CY1JD104F VRS-CY1JD106J VRS-CY1JD124J VRS-CY1JD151J VRSCY1JD2150F VRS-CY1JD222J VRSCY1JD78R7F VRS-CZ1JD000J VRS-CZ1JD472J VRS-RA3AA103J VRS-HT3AA393J VRS-TS2AD100J VRS-TS2AD563J VRS-TS2AD681J VSDTC114EK/-1 VSDTC114EK/-1 VSDTD113ZK/-1 (Unit) CPWBN0173QS31 CPWBN0173QS32 PRICE NEW RANK MARK AK AD AE AD AG AC AC AC AA AA AB N AF AD AB AA AA AA AB AB AA AA AC AC AC AC AB AC AC AB AB AC AE AZ AU AS AH AF AF AH AH AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AC AA AA AA AB AB AC BQ BS N N PART RANK C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B B C C C C C C C C C C C C C C C C C C C C C C C B B B E E DESCRIPTION Connector(TX24-30R-12ST-H1) Connector(MJ-62J-RD315) Connector(MJ-64J-RD315) Coil(1mH 250mA) Coil(ST110AV) Coil(BLM31AJ601SN1L) Beads core(B-01-AT1F) Coil(SBT-0260) Capacitor(50WV 10pF) Capacitor(50WV 33pF) Capacitor(50WV 47µF) Capacitor(250WV 0.47µF) Capacitor(250WV 0.22µF) Capacitor(16WV 0.1µF) Capacitor(50WV 0.01µF) Capacitor(50WV 1800pF) Capacitor(50WV 3300pF) Capacitor(16WV 0.1µF) Capacitor(16WV 0.1µF) Capacitor(50WV 1000pF) Capacitor(50WV 1000pF) Capacitor(16WV 1µF) Capacitor(16WV 0.22µF) Capacitor(16WV 0.68µF) Capacitor(50WV 0.1µF) Diode(1SS355) Diode(DAN217) Diode(S1ZB60) Zener Diode(HZS2A1TD) Diode(HZ3B1) Zener diode(RLZ5.6B) IC(TC7SET08F) IC(Si3015-FSR) IC(Si3021-FSR) IC(THS56F) Photo transistor(TLP620) Photo coupler(TLP621) Varistor(DSS301L) Arrestor(DSS-401M) Arrestor(DSS-401M) Resistor(1/4W 0Ω ±5%) Resistor(1/4W 0Ω ±5%) Resistor(1/4W 0Ω ±5%) Resistor(1/4W 10Ω ±5%) Resistor(1/4W 30Ω ±5%) Resistor(1/4W 91Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 10KΩ ±5%) Resistor(1/16W 100KΩ ±1%) Resistor(1/16W 10MΩ ±5%) Resistor(1/16W 120KΩ ±5%) Resistor(1/16W 150Ω ±5%) Resistor(1/16W 215Ω ±1%) Resistor(1/16W 2.2KΩ ±5%) Resistor(1/16W 78.7Ω ±1%) Resistor(1/16W 0Ω ±5%) Resistor(1/16W 4.7KΩ ±5%) Resistor(1W 10KΩ ±5%) Resistor(1W 39KΩ ±5%) Resistor(1/10W 10Ω ±5%) Resistor(1/10W 56KΩ ±5%) Resistor(1/10W 680Ω ±5%) Transistor(DTC114EK) Transistor(DTC114EK) Transistor(DTD113ZK) TEL/LIU PWB unit TEL/LIU PWB unit –6– [CN1] [MJ2] [MJ1] [Except U.S.A,Canada][L6] [L21] [L11,L12,L27,L28] [L32,L34] [L9,L10,L24,L25] [C68] [C66,C67] [C38,C39] [U.S.A,Canada][C25] [Except U.S.A,Canada][C25] [C47,C51,C52,C115] [C48] [C50] [C56,C60] [C35,C40,C41] [Except U.S.A,Canada][C92] [C72,C94] [U.S.A,Canada][C95] [C43] [C42,C49] [C53] [C45] [D2,D5] [D6,D7] [D8] [U.S.A,Canada][ZD24,ZD25] [ZD12] [ZD17,ZD19] [Except U.S.A,Canada][IC9] [IC4] [IC3] [Except U.S.A,Canada][IC6] [U.S.A,Canada][PC11] [PC6] [Except U.S.A,Canada][SA6,SA7] [SA4,SA5] [U.S.A,Canada][SA6,SA7] [F2,L15] [U.S.A,Canada][L13,L14] [Except U.S.A,Canada][R205] [Except U.S.A,Canada][R251,R252] [U.S.A,Canada][R206] [U.S.A,Canada][R205] [R183,R198,R209,R255,R262] [R263,R266,R281,R282] [R253,R264] [R184] [R200,R201] [R189] [R185] [R196] [R186] [R190] [R278,R279,R280] [R299] [U.S.A,Canada][R168] [Except U.S.A,Canada][R168] [R187,R188] [R199,R202] [R203,R204] [Q130] [Except U.S.A,Canada][Q133] [Q116] [U.S.A,Canada] [Except U.S.A,Canada] ■ Index PARTS CODE [C] CPLTP0378QS02 CPNLH0040QS02 CPWBF0178QS31 CPWBN0173QS31 " CPWBN0173QS32 " CPWBX0171QS32 " CPWBX0171QS33 CPWBX0171QS34 [D] DUNT-0533QS11 [J] JBTN-0089QSZZ [L] LPLTM0383QSZZ LSUPP0001QSZZ LX-HZ0002QSZZ [M] MLEVP0109QSZZ [P] PCOVP1468FCZZ [Q] QCNCM0149QSPZ QCNCM0150QSPZ QCNCM0151QSZZ QCNCM7014SC0C QCNCW0069QSZZ QCNW-7252HSZZ QCNW-7253HSZZ QCNW-7254HSZZ QCNWG0013QSZZ QJAKT0001FCZZ QJAKT0004QSZZ QPLGZ0001TSZZ QSOCZ0094FCPZ [R] RADPA0002TSZZ RADPA0003TSZZ RADPA0007TSZZ RC-EZ0365FCPZ RCILZ0008QSZZ RCILZ0089FCZZ RCILZ7012XCZZ RCORF1003MCZZ RCRSC0014QSZZ RCRUA0034QSPZ RCRUA0035QSPZ RCRUA0037QSPZ RFILN2011SCZZ RMPTR4000ACZZ RMPTR4101ACZZ RMPTR4103ACZZ RMPTR4272ACZZ RMPTR4330ACZZ RMPTR4472ACZZ RSP-Z0001QSPZ [S] SPAK-547ECCZZ SPAKP2374ACZZ SSAKA0006UCZZ SSAKA2345QCZZ SSAKA2440QCZZ [T] TCADZ0364QSZZ TCADZ0404TSZZ TINSE1363QSZZ TINSE1400TSZZ TINSF1402TSZZ TINSH1406TSZZ TINSI1403TSZZ TINSS1404TSZZ TINSX1401TSZZ TINSX1405TSZZ TINSX1407TSZZ TLABF0588QSZZ TLABG0371TSZZ PARTS CODE TLABG0613QSZZ TLABH0604QSZZ TLABH0605QSZZ TLABP0576QSZZ TLABZ0622TSZZ [U] UBATI0014FCZZ [V] VCCCCY1HH100D VCCCCY1HH330J VCCCCZ1EH271J VCCCCZ1HH101J VCCCCZ1HH151J VCCUCY1AJ105Z VCEASM1CM106M VCFYJU2EA224K VCFYPU2EA474K VCKYCY1CB104K VCKYCY1HB103K VCKYCY1HB182K VCKYCY1HB332K VCKYCZ1AB273K VCKYCZ1CF104Z " VCKYCZ1HB102K " VCKYCZ1HB222K VCKYCZ1HB471K VCKYCZ1HB472K VCKYCZ1HF103Z VCKYTV1CB105K VCKYTV1CB224K VCKYTV1CB684K VCKYTW1HB104K VHD1SS355//-1 " VHDDA204K//-1 VHDDAN217//-1 VHDS1ZB60//-1 VHEHZS2A1//-1 VHEMTZJ30B/-1 VHERLZ5.6B/-1 VHEUDZ2.0B/-1 VHI29L32007QS VHI29L32008QS VHI29L32009QS VHI74LCX00FT1 VHI74LCX08FT1 VHI74LCX14FT1 VHI74LCX244FT VHI74LCX32FT/ VHILM111718-1 VHIMN86065+-1 VHIN195006E-1 VHINJM2113M-1 VHIPST3426U-1 VHIPST591IM-1 VHISD4M16L1-1 VHISH770910-1 VHISI3015FS-1 VHISI3021FS-1 VHISM8578BV-1 VHIT4052BFF-1 VHITC7SET08F/ VHITHS56F//-1 VHPTLP620-1GB VHPTLP621-1GB VHVDSS301L/-1 VHVDSS-401M// VRD-HT2EY000J VRD-HT2EY100J VRD-HT2EY300J VRD-HT2EY910J VRS-CY1JD000J VRS-CY1JD103J VRS-CY1JD104F VRS-CY1JD106J VRS-CY1JD124J VRS-CY1JD151J VRSCY1JD2150F VRS-CY1JD222J PRICE NEW PART RANK MARK RANK NO. 1- 7 1- 9 1- 11 1- 22 3- 901 1- 22 3- 901 1- 20 2- 901 1- 20 1- 20 AR AT AY BQ BQ BS BS CQ CQ CQ CQ N N N N N N N N N N N C C E E E E E E E E E 1- 6 BB N E 1- 8 AP N C 1- 19 1- 29 1- 18 AY AC AC N C C C 1- 10 AN N C 2- 1 AD 2222311113312- 2 3 4 5 1 26 26 26 26 2 3 27 7 AT AG AE AA AK AR AT AP AF AD AE 11133333222232222221- 27 27 27 23 8 9 11 10 8 10 11 12 13 15 16 17 18 19 20 17 AB AD AG AC AC AH AR AR AR AC AB AB AB AB AB AB AG 1- 5 1- 28 1- 25 1- 3 1- 103 AB AD AA AC AB 1- 1 1- 1 1- 2 1- 2 1- 2 1- 104 1- 2 1- 2 1- 2 1- 104 1- 104 1- 24 1- 105 AN D N N N N N N N N AL BN AC N N N N N N N N C C C C C C C C C C C C C B B B C C C C C B B B B C B B B B B B B D D D D D N N N N N N N N N N N N N D D D D D D D D D D D D D –7– NO. PRICE NEW PART RANK MARK RANK 1- 24 1- 101 1- 102 1- 109 1- 108 AE AD AD AD 2- 22 AN B 3322222333333223232222333323233333211122222222222223322333333333333333333- AA AA AA AA AC AC AB AD AF AB AA AA AA AB AB AB AA AA AA AA AA AA AC AC AC AC AB AB AC AC AC AB AB AC AC BC BC BC AE AF AF AH AE AH BN BK AG AE AG AZ BH AZ AU AK AG AE AS AH AF AF AH AA AA AA AA AA AA AA AA AA AA AA AA C C C C C C C C C C C C C C C C C C C C C C C C C C B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B C C C C C C C C C C C C 19 20 23 25 26 27 29 26 25 27 28 29 30 33 34 31 35 32 36 37 38 39 33 34 35 36 40 37 41 38 39 40 41 43 42 23 23 23 47 48 49 50 51 52 54 55 56 59 60 61 62 45 46 64 66 44 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 N N N N N N N N N D D D D D PARTS CODE VRSCY1JD78R7F VRS-CZ1JD000J " VRS-CZ1JD101J VRS-CZ1JD102J VRS-CZ1JD103J VRS-CZ1JD104J VRS-CZ1JD105J VRS-CZ1JD153J VRS-CZ1JD162J VRS-CZ1JD183J VRS-CZ1JD202J VRS-CZ1JD203J VRS-CZ1JD204J VRS-CZ1JD220J VRS-CZ1JD222J VRS-CZ1JD223J VRS-CZ1JD272J VRS-CZ1JD330J VRS-CZ1JD331F VRS-CZ1JD332J VRS-CZ1JD333J VRS-CZ1JD361J VRS-CZ1JD470J VRS-CZ1JD472J " VRS-CZ1JD473J VRS-CZ1JD512J VRS-CZ1JD561J VRS-CZ1JD562J VRS-CZ1JD563J VRS-CZ1JD623J VRS-CZ1JD682J VRS-CZ1JD753J VRS-CZ1JD821J VRS-CZ1JD823J VRS-HT3AA393J VRS-RA3AA103J VRS-TS2AD100J VRS-TS2AD471J VRS-TS2AD563J VRS-TS2AD681J VSDTC114EK/-1 VSDTC363EKA-1 VSDTD113ZK/-1 [X] XBPS730P08KS0 XEBSD30P08000 XHBSE30P08000 NO. PRICE NEW PART RANK MARK RANK 3- 65 2- 70 3- 67 2- 71 2- 72 2- 73 2- 74 2- 75 2- 76 2- 77 2- 78 2- 79 2- 80 2- 81 2- 82 2- 83 2- 84 2- 85 2- 86 2- 87 2- 88 2- 89 2- 90 2- 91 2- 92 3- 68 2- 93 2- 94 2- 95 2- 96 2- 97 2- 99 2- 100 2- 102 2- 103 2- 104 3- 70 3- 69 3- 71 2- 106 3- 72 3- 73 3- 77 2- 108 3- 78 AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AF AA AA AA AA AA AA AA AA AA AA AA AA AA AC AB AA AA AA AA AB AC AC 1- 21 1- 12 1- 16 AB AA AA PARTS CODE C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C B B B N C C C –8– NO. PRICE NEW PART RANK MARK RANK MEMO –9– [00]COVER.fm 2 ページ 2004年11月12日 金曜日 午後2時22分 CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) Contains lithium-ion battery. Must be disposed of properly. Remove the battery from the product and contact federal or state environmental agencies for information on recycling and disposal options. [00]COVER.fm 3 ページ 2004年11月12日 金曜日 午後2時22分 COPYRIGHT c 2004 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Trademark acknowledgments Windows and Windows NT are trademarks of Microsoft Corporation in the U.S.A. and other countries. IBM and PC/AT are trademarks of International Business Machines Corporation. PCL is a trademark of Hewlett-Packard Company. Pentium is a registered trademark of Intel Corporation. All other trademarks and copyrights are the property of their respective owners. SHARP CORPORATION Digital Document System Group Qualty Enhancement Center Yamatokoriyama, Nara 639-1186, Japan 2004 November Printed in Japan N